Investigation of structural and physico-chemical properties of rice starch with varied amylose content: A combined microscopy, spectroscopy, and thermal study

Amylopectin chain length distributions and amylose content are determinants of viscoelasticity and digestibility differences in mung bean starch and proso millet starch

This study aimed to reveal the underlying mechanisms of the differences in viscoelasticity and digestibility between mung bean starch (MBS) and proso millet starch (PMS) from the viewpoint of starch fine molecular structure. The contents of amylopectin B2 chains (14.94-15.09 %), amylopectin B3 chains (14.48-15.07 %) and amylose long chains (183.55-198.84) in MBS were significantly higher than PMS (10.45-10.76 %, 12.48-14.07 % and 70.59-88.03, respectively). MBS with higher amylose content (AC, 28.45-31.80 %) not only exhibited a lower weight-average molar mass (91,750.65-128,120.44 kDa) and R1047/1022 (1.1520-1.1904), but also was significantly lower than PMS in relative crystallinity (15.22-23.18 %, p < 0.05). MBS displayed a higher storage modulus (G') and loss modulus (G'') than PMS. Although only MBS-1 showed two distinct and discontinuous phases, MBS exhibited a higher resistant starch (RS) content than PMS (31.63-39.23 %), with MBS-3 having the highest RS content (56.15 %). Correlation analysis suggested that the amylopectin chain length distributions and AC played an important role in affecting the crystal structure, viscoelastic properties and in vitro starch digestibility of MBS and PMS. These results will provide a theoretical and scientific basis for the development of starch science and industrial production of low glycemic index starchy food.

Starch spectra of Ampelopteris prolifera (Retz.) Copel, a new addition to the existing lexicon and its comparison with a local potato cultivar (Solanum tuberosum L. cv. Kufri Jyoti)

Novel kinds of starch spectra were generated from a lesser-known plant, making this investigation unique. The recent trend of starch characterization shows the establishment of novel bioresources from nonconventional unexplored databases. The present endeavor was made to obtain the starch fingerprint of Ampelopteris prolifera (rhizome) belonging to seedless vascular plants. For comparison, a commercial local cultivar of potato (Kufri Jyoti) was taken. The starch particle of A. prolifera shows much uniqueness depicting its novelty viz., crystallinity index of 60.04 %, powder diffractogram at (2θ scale)17.57° to 39.78°; this diffractogram pattern is reported from this study as newer one i.e. R type(whereas potato starch is CB type); characteristic peak at 2θ = 20.07° suggests starch-lipid complex formation and V type crystallinity (i.e. RS 5 type); FTIR spectra showing the presence of more short chain branching; high gelatinization temperature(84.62 ± 0.10), particle size and zeta value of A. prolifera is 4.00 ± 0.81 μm and - 18.91 ± 3.58 mV respectively. Bragg's peak from the single crystal X-ray diffraction has been generated for the first time of A. prolifera. Extraction of the starch particle was performed in chilled water. Therefore, the present study suggests wide-spectrum commercial utility and cost-effective production.

Optimization of the morphological, structural, and physicochemical properties of maize starch using straw returning and nitrogen fertilization in Northeast China

The combination of straw returning and nitrogen (N) fertilization is a popular tillage mode and essential strategy for achieving stable yield and high quality. However, the optimal combination strategy and the influence of tillage mode on the morphological, crystalline, and molecular structures of maize starch remain unclear. We conducted a long-term field experiment over 7 years in Northeast China using two tillage modes, rotary tillage with straw returning (RTS) and plow tillage with straw returning (PTS), and four N application rates. The relative crystallinity, 1045/1022 cm-1 value, and B2 and B3 chains of maize starch were higher under RTS than under PTS, resulting in increased stability of starch and improvements in gelatinization enthalpy and temperature. The surface of the starch granules induced by N fertilizer was smoother than that under the N0 (0 kg N ha-1) treatment. The proportion of amylose content, solubility, swelling power, and light transmittance increased under N2 (262 kg N ha-1) treatment, along with improvement in starch pasting properties. These results suggest that RTS combined with N2 treatment can regulate the morphological, structural, and physicochemical characteristics of maize starch, providing an essential reference for improving the quality of maize starch from an agronomic point of view.

Raw starch degrading alkaline α-amylase from Geobacillus kaustophilus TSCCA02: Production, characterization, and its potential for application as a detergent additive

Geobacillus kaustophilus TSCCA02, a newly isolated strain from cassava (Manihot esculenta L.) rhizosphere soil in Thailand, showed maximum raw starch degrading enzyme (RSDE) activity at 252.3 ± 9.32 U/mL with cassava starch and peptone at 5.0 and 3.0 g/L, respectively. 16 S ribosomal RNA (rRNA) sequencing and phylogenetic tree analyses indicated that the TSCCA02 strain was closely related to G. kaustophilus. The crude RSDE had optimal activity at 60°C and pH 9.0. This enzyme degraded various kinds of starch including potato starch, cassava starch, rice flour, corn starch, glutinous rice flour, and wheat flour to produce sugar syrup at 60°C, as confirmed by scanning electron microscopy (SEM), thin-layer chromatography (TLC), and Fourier-transform infrared spectroscopy (FTIR). The major end products of starch hydrolysis were maltose and maltotriose with a small amount of glucose, confirming this enzyme as an α-amylase. The enzyme improved the washing efficiency of cotton fabric with commercial detergent. Results indicated the potential of alkaline α-amylase produced from a new isolate of G. kaustophilus TSCCA02 for application as a detergent additive on an industrial scale.

A review of the effects of fermentation on the structure, properties, and application of cereal starch in foods

Fermentation is one of the oldest food processing techniques known to humans and cereal fermentation is still widely used to create many types of foods and beverages. Starch is a major component of cereals and the changes in its structure and function during fermentation are of great importance for scientific research and industrial applications. This review summarizes the preparation of fermented cereals and the effects of fermentation on the structure, properties, and application of cereal starch in foods. The most important factors influencing cereal fermentation are pretreatment, starter culture, and fermentation conditions. Fermentation preferentially hydrolyzes the amorphous regions of starch and fermented starches have a coarser appearance and a smaller molecular weight. In addition, fermentation increases the starch gelatinization temperature and enthalpy and reduces the setback viscosity. This means that fermentation leads to a more stable and retrogradation-resistant structure, which could expand its application in products prone to staling during storage. Furthermore, fermented cereals have potential health benefits. This review may have important implications for the modulation of the quality and nutritional value of starch-based foods through fermentation.

Tailoring the formulation of sugar-snap cookies to lower in vitro starch digestibility: A response surface modelling approach

An I-optimal response surface experimental design revealed impacts of dough moisture content (DMC, 14-22%) and level of wheat flour substitution (10-50%) by wheat gluten and one of six different native starches [wheat, (waxy) maize, rice, potato, pea] on sugar-snap cookie starch thermal properties, in vitro starch digestion, dough and cookie hardness and spread ratio. Increasing DMCs from 14 to 22% increased the cookie starch digestion rate constants of each starch source used. A linear increase of the constant by 25-30% across the 14 to 22% DMC range for all starches was predicted and validated. That cookie spread and hardness were related to the water retention capacity of the native starches used suggested that they underwent limited changes during baking. For each starch examined, formulations were optimized to lower in vitro starch digestion rate and extent, and cookie hardness, while maximizing dough spread ratio.

Introducing graphene quantum dots in decomposable wheat starch-gelatin based nano-biofilms

This research aims to discover a viable substitute for the common harmful plastic packaging utilized in food products. Citric acid was employed as an accessible and risk-free precursor in synthesizing graphene quantum dots (GQDs). Using the efficient carbonization technique, GQDs were obtained and subsequently transferred to nano-biofilms in varying percentages relative to natural polymers. FT-IR, XRD, FE-SEM, EDX, and AFM analyses were conducted to examine the formation of the nano-biofilms. GQDs demonstrated optimal performance in the disk diffusion method and the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical approach. Adding GQDs to starch and gelatin composite improved the physical properties of nano-biofilms such as moisture contact, swelling index, and solubility. The transparency of the films was reduced by GQDs, which reduces the transmission of visible light and plays an important role in food protection. The packaging films' weight loss due to decomposition was examined after being buried in soil for 50 days, which relieved the eco-concerns of these packaging films. To evaluate the performance of the films in inhibiting food spoilage, cherries, and cucumbers were packed with a control film and the fabricated film containing 14 wt% of GQD. After 14 days, the modified nano-biofilm was able to maintain the freshness of the samples.

Differences in the Chromogenic Effect of Corn Starch and Potato Starch on Paprika Red Pigment and Structural Characterisation

The present study aims to investigate the chromogenic effect and the interaction between starch-pigment complexes of corn starch (CS) and potato starch (PS) complexed with paprika red pigment. Compared to PS, CS showed 12.5 times higher adsorption capacity for paprika red pigment. Additionally, the a* value of CS-P (26.90 ± 0.23) was significantly higher than that of PS-P (22.45 ± 1.84), resulting in a corn starch-paprika red pigment complex (CS-P) with a more intense red colour. The addition of paprika red pigment significantly decreased the particle size and porosity of CS by 48.14 ± 5.29% and 17.01 ± 3.80%, respectively. Conversely, no significant impact on PS was observed. Additionally, the Fourier transform infrared (FT-IR) spectroscopy results revealed that the starch molecules and paprika red pigment were bound to each other through strong hydrogen bonds. X-diffraction (XRD) results indicated that the starch-paprika red pigment complexes have a V-shaped structure. Furthermore, the relative crystallinity of the complexes between starch and red pepper pigment showed an increasing trend, however, the relative crystallinity of CS increased significantly by 11.77 ± 0.99-49.21 ± 3.67%. Consequently, the CS-P colouring was good.

Impact of granule-associated lipid removal on the property changes of octenylsuccinylated small-granule starches

Starch granule associated lipids (GALs) are known to alter the properties and functions of small granule starches. To test the hypothesis that the removal GALs from small granule starches could increase the overall reactive surface and improve octenyl-succinylation (OSA) modification efficiency, four small granules starches from rice, oat, quinoa, amaranth and a waxy maize starch were subjected to defat, OSA esterification and combined defatted and OSA treatment. The combined treatment showed a significant improvement in the degree of substitution for all starches from both tritration and 1H NMR methodologies. Confocal microscopy revealed a more uniform distribution of OSA groups on the starch surface. After GALs removal, the bimodal granule size distribution was diminished but reappeared during OSA modification. Pasting viscosity increased for the OSA and GALs removed quinoa, waxy maize and amaranth starches, but it decreased on modified rice and oat starches. OSA treatment alone significantly altered the gelling and rheological properties towards a more soft and less stable starch structure. The combined treatment compensated these changes to some extent and filled the property gap between the native and OSA modified starches. This study demonstrated that removing GALs can achieve more profound OSA derivatization.

Extraction, purification and characterization of amylose from sago and corn: Morphological, structural and molecular comparison

In the present work, a comprehensive study was carried out to better understand the molecular characteristics of amylose extracted from sago starch, using butanol as the extraction solvent. The sago derived amylose was compared with amylose extracted from corn starch and both characterized through different techniques, i.e. size exclusion chromatography, X-ray diffraction (XRD), Fourier transform infrared spectroscopy, Raman spectroscopy, Scanning electron microscopy, Atomic force microscopy and Zeta potential measurements. The purity of the amylose extracted from sago and corn was 99.20 % and 93.46 %, respectively. From XRD results, it was revealed that sago amylose had more crystallinity with high thermal stability compared to corn amylose. Based on Raman spectra, single and double helices formed in both extracted amyloses, but due to their intrinsic differences, the intensities associated with these helices varied for sago and corn amylose. Purified amyloses were shown to have two different forms of spherulite morphology: torus and spherical shapes with varying degrees of roughness. Our findings demonstrated that sago starch is a novel and low-cost source for supplying amylose, a promising polymer for different applications.

The differences in metabolites, starch structure, and physicochemical properties of rice were related to the decrease in taste quality under high nitrogen fertilizer application

Nitrogen fertilizer application is one of the key cultivation practices to improve rice yields. However, the application of high nitrogen fertilizers often leads to a reduction in the stickiness of the rice after cooking, thus reducing the taste quality of rice. Moreover, there are differences in taste quality among rice varieties, and the mechanism has not been studied in depth. In this study, two rice varieties (Meixiangzhan2hao and Exiang2hao) were planted under two nitrogen fertilizer levels. The physicochemical properties and taste quality of the rice were determined after maturity. Our results showed that high nitrogen fertilizer level alters tryptophan metabolism in rice, increasing most amino acid content and protein content in rice. The high content of protein and the higher short-range ordered structure of starch inhibited the gelatinization characteristics of starch and reduced the taste quality of rice. Under high nitrogen fertilizer application, Exiang2hao showed smaller increases in protein content, lower level of amylose and relative crystallinity, and higher content of lipid metabolites. These differences in chemical substances resulted in a less pronounced reduction in the taste quality of Exiang2hao. In this study, the taste quality of different rice varieties under different levels of nitrogen fertilizer application was analyzed, providing new ideas for future improvement of rice taste quality.

Effect of operating conditions on structure and digestibility of spray-dried corn starch

Spray drying has been widely applied in food industry due to its efficiency and low cost. Exploring feasibility to prepare resistant starch (RS) via spray drying could open up new route to produce starch-based products with low glycemic index efficiently. In this study, effects of spray drying operating conditions on the structure and digestibility of recrystallized spray-dried corn starch (RSDCS) were explored. Apparent amylose content (AAC) and swelling power (SP) of the RSDCSs increased after the spray drying and recrystallization. Particle size of the RSDCSs decreased significantly with increase of compressed air flow and decrease of starch suspension concentration. Furthermore, the short-range order, long-range order, and content of RS in the RSDCSs decreased with increase of compressed air flow and starch suspension concentration. The Pearson's correlation analysis showed that digestive properties of the RSDCSs were mainly related to the short-range ordered structure and crystalline structure. Moreover, Mantel analysis revealed that operating conditions changed the digestibility of the RSDCSs through impacting crystalline structure, AAC and SP. The highest content of RS in the RSDCSs (23.08%) was increased near 2.6 times comparing to that of native corn starch (9.02%).

Breaking the temperature limitation of zein-rice starch dough by microwave pre-gelatinization: Morphological, structural and rheological properties of the dough

Zein has gluten-like viscoelasticity, but its use is limited due to high glass transition temperature (Tg). To break the temperature limitation of zein-starch dough, microwave heating was used to pre-gelatinize a partial of the starch with zein, and then the remaining was added and kneaded to form a dough. Pre-gelatinized doughs formed by rice starch (PRS), zein-starch (PUZS), and extruded zein-starch (PEZS) were included in this study. The thermal, morphological, rheological, and secondary structural properties of the dough were investigated. The results showed that zein and starch formed a composite gel network and firmly bound starch granules, which improved the dough properties with a smooth surface and compact internal structure, increased strain tolerance, and decreased stiffness. Unextruded zein was distributed uniformly and had strong interactions with the starch. Extruded zein tended to form large particles and had limited interaction with starch but improved dough extensibility. Microwave pre-gelatinization increased the stability of the secondary structure of zein and maintained the viscoelasticity of dough below zein's Tg, which provided a safe and effective way to break the temperature limitation of zein as a structural protein used in foods.

Effect of electron beam irradiation on granular cold-water swelling chestnut starch: Improvement of cold-water solubility, multiscale structure, and rheological properties

In this study, granular cold-water swelling (GCWS) starch was prepared from chestnut starch by ethanol-alkali method, after which it was further modified by electron beam irradiation (EBI) technique to investigate the effect of EBI on GCWS chestnut starch. It was shown that the alcohol-alkali treatment disrupted the starch double helix structure and the starch crystalline form had been changed from "C" to "V" type. On this basis, EBI continued to act on the disrupted starch chains and further cleaved the long chains into short chains, which significantly improved the solubility of starch to 90.08 % in cold water at a 24 kGy irradiation dose. Therefore, this study can broaden the application scope of starch and provide new ideas for GCWS starch applications in food and water-soluble pharmaceutical industries.

Comparison of the fine structure and physicochemical properties of proso millet (Panicum miliaceum L.) starch from different ecological regions

Field experiments were conducted to evaluate the morphology, granule size, fine structure, thermal properties, and pasting properties of starch from a waxy (139) and a non-waxy (297) varieties of proso millet grown in Yulin (YY) and Yangling (YL). Compared with the starches from the two varieties grown in YY, the starches from the two varieties grown in YL exhibited higher relative crystallinities, 1045/1022 cm-1 ratio, and amounts of amylopectin long branch chains (APL) but lower 1022/995 cm -1 ratio, amounts of amylopectin short branch chains (APs), and APs/APL ratios. Starches from YL also synthesized long branch-chain amylopectin to enhance intermolecular interactions and form a stable granular structure, which resulted in increased starch gelatinization temperature, enhanced shear resistance, and reduced setback viscosity. Starch from the waxy (139) variety has good application prospects in the food industry because of its high gelatinization temperature and light transmittance and low setback value, which can be ascribed to its extremely low amylose content, polydispersity index, high molecular weight, and dispersed molecular density. It may serve as a reference for applying proso millet starches in the food industry and developing breeding programs to improve starch quality.

Revealing the Structural Organization of Gamma-irradiated Starch Granules Using Polarization-resolved Second Harmonic Generation Microscopy

Starch is a semi-crystalline macromolecule with the presence of amorphous and crystalline components. The amorphous amylose and crystalline amylopectin regions in starch granules are susceptible to certain physical modifications, such as gamma irradiation. Polarization-resolved second harmonic generation (P-SHG) microscopy in conjunction with SHG-circular dichroism (CD) was used to assess the three-dimensional molecular order and inherent chirality of starch granules and their reaction to different dosages of gamma irradiation. For the first time, the relationship between starch achirality (χ21/χ16 and χ22/χ16) and chirality (χ14/χ16) determining susceptibility tensor ratios has been elucidated. The results showed that changes in the structure and orientation of long-chain amylopectin were supported by the decrease in the SHG anisotropy factor and the χ22/χ16 ratio. Furthermore, SHG-CD illustrated the molecular tilt angle by revealing the arrangement of amylopectin molecules pointing either upward or downward owing to molecular polarity.

Structural Characteristics, Physicochemical Properties, and Digestibility Analysis of Resistant Starch Type-V Prepared from Debranched Corn Starch and Fatty Acid Complexation

Corn starch was gelatinized and treated with a metagenomic type 1 pullulanase (Pul_M), increasing the proportion of linear glucan chains. The debranched corn starch (DCS), containing amylose helices, was subjected to complexation with fatty acid molecules at moderate temperatures (50-60 °C). The amylose-lipid complexes prepared using saturated fatty acids, e.g., capric acid (CA) and lauric acid (LA), displayed higher CI values as compared to that of unsaturated fatty acid compounds, e.g., undecylenic acids (UAs) and oleic acid (OA). The DCS-fatty acid complex was estimated to contain about 14% of rapidly digested starch (RDS), 26% of slowly digested starch (SDS), and 60% of resistant starch V (RS-5). RS-5 samples exhibited high resistance toward digestive enzymatic hydrolysis. The surface microdetails of RS-5 were examined by scanning electron microscopy (SEM), depicting small spherulite-like structural aggregates. X-ray diffraction pattern analysis estimated about 46% of the crystallinity of RS-5. Thermal attributes of RS-5 were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis, depicting the increase in melting enthalpies after the complexation of fatty acid molecules with debranched corn starch. Comparative DSC thermograms divulged a relatively higher stability of RS-5 as compared to that of RS-3. The findings advocated the potentiality of RS-5 (nondigestible DCS-LA complex) as a functional, valuable ingredient in the food industry.

Mining nutri-dense accessions from rice landraces of Assam, India

The Indian subcontinent is the primary center of origin of rice where huge diversity is found in the Indian rice gene pool, including landraces. North Eastern States of India are home to thousands of rice landraces which are highly diverse and good sources of nutritional traits, but most of them remain nutritionally uncharacterized. Hence, nutritional profiling of 395 Assam landraces was done for total starch, amylose content (AC), total dietary fiber (TDF), total protein content (TPC), oil, phenol, and total phytic acid (TPA) using official AOAC and standard methods, where the mean content for the estimated traits were found to be 75.2 g/100g, 22.2 g/100g, 4.67 g/100g, 9.8 g/100g, 5.26%, 0.40 GAE g/100g, and 0.34 g/100g for respectively. The glycaemic index (GI) was estimated in 24 selected accessions, out of which 17 accessions were found to have low GI (<55). Among different traits, significant correlations were found that can facilitate the direct and indirect selection such as estimated glycemic index (EGI) and amylose content (-0.803). Multivariate analyses, including principal component analysis (PCA) and hierarchical clustering analysis (HCA), revealed the similarities/differences in the nutritional attributes. Four principal components (PC) i.e., PC1, PC2, PC3, and PC4 were identified through principal component analysis (PCA) which, contributed 81.6% of the variance, where maximum loadings were from protein, oil, starch, and phytic acid. Sixteen clusters were identified through hierarchical clustering analysis (HCA) from which the trait-specific and biochemically most distant accessions could be identified for use in cultivar development in breeding programs.

Understanding the multi-scale structure and physicochemical properties of millet starch with varied amylose content

The multi-scale structure and physicochemical properties of starch from five indigenous millet varieties were investigated and their correlations were revealed. Results showed that apparent amylose content (AAC) ranged from 12.3% to 27.4%, and as the amylose increasing, the ordered degree of starch double-helical, ordered molecular structure and crystalline structures displayed a declined trend. All millet starches showed polygonal, spherical or irregular shapes varied with size, but XIN-3 starch granules (highest AAC) presented higher granule rigidity, compactness and bulk intensity. Specifically, the ordered molecular structure (e.g., higher double-helix content, short-range ordered degree and relative crystallinity) of millet starch with low amylose limited the swelling degree of starch granules and in turn decreased the characteristic viscosity. However, rapidly digestible starch (RDS) was significantly negatively correlated with AAC and ordered molecular structure. The information obtained in this study would be significant in the rational utilization of these millet starches in food industry fields.

Multi-Scale Structural Insights into Enzymatically Hydrolyzed Lentil Starch Concentrates Prepared by In Vitro Method Using Different Types of Enzymes

This study was undertaken to investigate the enzymatic hydrolysis of lentil starch concentrates from conventional cooked seeds (CCLSC) by the action of different types of enzymes, including pancreatin (PC-EHSC), heat-stable α-amylase (HS-EHSC), β-amylase (βA-EHSC), amyloglucosidase (AMG-EHSC), and multi-enzymes (βA-HS-AMG-EHSC); their multi-scale structural characteristics of the enzymatic hydrolysis products of lentil starch concentrates were compared. The morphological features distinguished among different samples. The Fourier-transform infrared spectroscopy and solid-state ¹³C CP/MAS NMR spectral features indicated the possible formation of a binary and ternary complex among amylose, protein and lipids. The X-ray diffraction results revealed that the V-type characteristic diffraction peaks were more obvious for samples including PC-EHSC and βA-EHSC, which was in line with their lowest polydispersity index (DP_n). PC-EHSC and βA-EHSC also showed an increased peak intensity of the scattering maximum on the small-angle X-ray scattering spectra, whereas CCLSC exhibited an overall lower peak intensity within the studied q range of scattering. The highest XRD crystallinity and the lowest DP_n value obtained for PC-EHSC indicated that the starch polymers modified by pancreatin could produce glucan chains with a comparatively homogenous M_w distribution that are readily recrystallized by hydrogen bonding through chain aggregation. Comparatively, the lowest relative crystallinity for HS-EHSC obtained from XRD suggested that thermostable α-amylolysis was unfavorable for the formation of starch structure with a higher degree of molecular order. This study could provide useful information for the needed research to obtain a deeper understanding of the impact of different amylolysis actions on the structural organization of starch hydrolysates and to provide a theoretical foundation for the development of fermentable enzymatically hydrolyzed starch with well-tailored physiological properties.

Effects of lactic acid bacteria fermentation on the physicochemical and structural characteristics of starch in blends of glutinous and japonica rice

In this study, the effects of lactic acid bacteria (LAB) fermentation on the physicochemical and structural characteristics of mixed starches in blends of glutinous and japonica rice were investigated. Five starter cultures improved in varying degrees the hydration ability, transparency, and freeze-thaw stability of the mixed starches. Mixed starch I, prepared by fermentation of Lactobacillus acidophilus HSP001, exhibited optimal water-holding capacity, solubility, and swelling power. In comparison, mixed starches V and III involved fermentation of L. acidophilus HSP001 and Latilactobacillus sakei HSP002, using ratios of 2:1 and 1:1 to achieve higher transparency and freeze-thaw stability, respectively. The LAB-fermented, mixed starches exhibited excellent pasting properties due to their high peak viscosities and low setback values. Moreover, the viscoelasticity of mixed starches III-V, prepared by compound fermentation of L. acidophilus HSP001 and L. sakei HSP002 in ratios of 1:1, 1:2, and 2:1, respectively, proved superior to their single strain fermentation counterparts. Meanwhile, LAB fermentation resulted in reduced gelatinization enthalpy, relative crystallinity, and short-range ordered degree. Thus, the effects of five LAB starter cultures on mixed starches were inconsistent, but these results provide a theoretical basis for the application of mixed starches. PRACTICAL APPLICATION: Lactic acid bacteria was used to ferment blends of glutinous and japonica rice. Fermented mixed starch had better hydration, transparency, and freeze-thaw stability. Fermented mixed starch exhibited nice pasting properties and viscoelasticity. LAB fermentation corroded starch granules, leading to the decrease of ΔH. Relative crystallinity and short-range order of fermented mixed starch decreased.

Physicochemical properties and in vitro digestibility of highland barley starch with different extraction methods

The objective of this study was to compare the structural, thermal, rheological and digestive properties of highland barley starch (HBS) by different extraction methods. Five techniques were used to extract HBS: Alkali extraction, Ultrasound extraction, double enzyme extraction (DE), three enzyme extraction (TE) and ultrasonic assisted TE (U-TE). The results indicated that the Ultrasound extracted HBS had fewer Maltese crosses, lower molecular weight (Mw), and higher content of damaged starch (P < 0.05). Meanwhile, DE extracted HBS had higher Mw, and the content of short amylopectin than that of Alkali extracted HBS (P < 0.05). Additionally, the DE extracted HBS showed the highest relative crystallinity and good short-range ordered structure, which led to the outcome of stronger thermal stability and higher values of G' and G'' (P < 0.05). These results indicated that enzymatic extraction could better protect the resistance of HBS by protecting its physicochemical properties.

Nitrogen fertilizer affects starch synthesis to define non-waxy and waxy proso millet quality

Understanding the effect of nitrogen fertilization on the quality of proso millet is key to expanding the use of this crop to address water scarcity and food security. Therefore, this study determined the impact of nitrogen fertilization on the proso millet quality. Nitrogen fertilization significantly increased the NR and GS activities and decreased the GBSSase activity, resulting in an increase in protein content and reduction in amylose content and L*, which decreased the appearance quality. Nitrogen fertilization increased the proportion of short amylopectin chains, resulting in a more disordered carbohydrate structure, and decreased the proportion of hydrophilic functional groups, contributing to an increase in setback viscosity and decrease in pasting temperature in the waxy (w139) variety. In contrast, the non-waxy (n297) variety exhibited a larger proportion of long amylopectin chains, lower ordered structure and hydrophobic functional groups after nitrogen fertilization, which strengthened the inter- and intramolecular forces of starch colloids.

Effect of Storage Time and Temperature on Digestibility, Thermal, and Rheological Properties of Retrograded Rice

Retrogradation is defined as the recrystallization or realignment of amylose and amylopectin chains upon cooling of gelatinization starch gels. The storage conditions such as the storage time and temperature are crucial factors that influence and govern the degree of retrogradation and in turn, affect the formation of resistant starch and alteration of thermal and rheological properties. This article investigates the effect of storage time and temperature on the properties of retrograded rice starch. Rice kernels of five different indigenous varieties, namely Diasang lahi, Khaju lahi, Dhusuri bao, Omkar, and Bili rajamudi were cooked by boiling in water and stored at 4 °C and -20 °C for 6 and 12 h, respectively. Differential scanning calorimetry (DSC) studies revealed in raw form that Bili rajamudi exhibited the highest peak gelatinization temperature (T_p, °C) at 79.05 °C whereas Diasang lahi showed the least T_p at 56.12 °C. Further, it was indicated that the T_p and degree of retrogradation (DR%) also increase with increasing time and decreasing temperature of storage. All samples stored at -20 °C for 12 h exhibited the highest degree of retrogradation DR%. Amongst all five varieties stored at -20 °C for 12 h, Omkar exhibited the highest %DR, followed by Bili rajamudi, Khaju lahi, Dhusuri bao, and Diasang lahi. A negative correlation was also established between T_p and resistant starch content (RS%). It was also observed that the resistant starch (RS%) content increased with the increasing time and decreasing temperature of storage. A strong negative correlation was observed between RS% and non-resistant starch (NRS%). Further, rheological studies indicated that retrogradation also affects the viscosity and dynamic rheological properties of starch. In this study, it was evident that extending storage duration from 6 to 12 h and lowering temperature from 4 to -20 °C impact retrogradation of rice starch, which in turn affects the starch's gelatinization, digestibility, and rheology. Rice starch retrograded at lower temperatures for a longer period could prove to be extremely beneficial for development of food products with better textural properties and high RS content or low glycemic index.

Structural and in vitro starch digestion properties of starch-fatty acid nanocomplexes: effect of chain lengths and degree of unsaturation of fatty acids

BACKGROUND

The structural and digestion properties of starch-lipid complexes are closely related to the properties of lipids. The chain length and degree of unsaturation of fatty acids (FAs), which can affect the structural and digestion properties of starch-lipid nanocomplexes, therefore need to be examined in detail to gain a better understanding of this. In this study, the effects of chain length (10-18 carbons) and degree of unsaturation (0-2) of FA on the structural and in vitro starch digestion properties of high amylose corn starch (HAS)-FA nanocomplexes were investigated, as was the correlation between their structural alterations and digestibility.

RESULTS

This study showed that HAS-FA nanocomplexes with 10-carbon (38.55%) and 12-carbon (44.56%) FAs displayed high-resistant starch (RS) and slowly digestible starch (SDS) content, whereas those with 18-carbon FAs with two double bonds exhibited low RS + SDS content (23.41%). The complexing index, R_1047/1022 , relative crystallinity, and enthalpy change in the HAS-FA nanocomplexes also increased with the reduction in the chain length (except for 10-carbon FA) and the degree of unsaturation of FAs, whereas the equilibrium hydrolysis percentage, kinetic constant and apparent amylose content showed an opposite trend.

CONCLUSION

Chain length and degree of unsaturation of FAs affected the digestibility of HAS-FA nanocomplexes. The HAS-FA nanocomplexes with 12-carbon FAs displayed high RS + SDS content with higher degrees of molecular order at long-range and short-range levels. Results provided guidelines to regulate the digestibility of starch-fatty acid nanocomplexes by varying the FA structures. © 2022 Society of Chemical Industry.

Thermal properties of different types of starch: A review

Starch is present in high amount in various cereals, fruits and roots & tubers which finds major application in industry. Commercially, starch is rarely consumed or processed in its native form, thus modification of starch is widely used method for increasing its application and process stability. Due to the high demand for starch in industrial applications, researchers were driven to hunt for new sources of starch, including modification of starch through green processing. Thermal properties are significant reference parameters for evaluating the quality of starch when it comes to cooking and processing. Modification of starches affects the thermal properties, which are widely studied using Differential scanning calorimeter or Thermogravimetric analysis. It could lead to a better understanding of starch's thermal properties including factors influencing and expand its commercial applications as a thickener, extender, fat replacer, etc. in more depth. Therefore, the review presents the classification of starches, factors influencing the thermal properties, measurement methods and thermal properties of starch in its native and modified form. Further, this review concludes that extensive research on the thermal properties of new sources of starch, as well as modified starch, is required to boost thermal stability and extend industrial applications.

Environmental Properties and Applications of Biodegradable Starch-Based Nanocomposites

In recent years, the demand for environmental sustainability has caused a great interest in finding novel polymer materials from natural resources that are both biodegradable and eco-friendly. Natural biodegradable polymers can displace the usage of petroleum-based synthetic polymers due to their renewability, low toxicity, low costs, biocompatibility, and biodegradability. The development of novel starch-based bionanocomposites with improved properties has drawn specific attention recently in many applications, including food, agriculture, packaging, environmental remediation, textile, cosmetic, pharmaceutical, and biomedical fields. This paper discusses starch-based nanocomposites, mainly with nanocellulose, chitin nanoparticles, nanoclay, and carbon-based materials, and their applications in the agriculture, packaging, biomedical, and environment fields. This paper also focused on the lifecycle analysis and degradation of various starch-based nanocomposites.

Structural, physicochemical and rheological properties of starches isolated from banana varieties (Musa spp.)

•

High starch content in green banana can be extracted for industry and avoid waste.

•

Banana starch from Tanzania was rich in amylose and resistant starch.

•

Banana starch paste presented great structural stability.

•

Banana starch had potential to produce edible films and replace chemical binder.

Banana starches were isolated from five banana varieties in Tanzania to analyze the proximate composition, structure, physicochemical and rheological properties. The amylose content of banana starches was 29.92 ± 0.17 %–39.50 ± 0.08 % and the resistant starch content of cooked banana starches ranged from 44.74 ± 1.72 % to 55.43 ± 1.52 %. Banana starch granules presented irregular shapes with particle size of 21.73 to 24.67 μm and showed B-type or C-type crystalline patterns with crystallinity of 36.69 % to 41.83 %. The solubility and the swelling power were 2.5 ± 0.42 %–4.4 ± 0.57 % and 11.27 ± 0.04 %–12.48 ± 0.71 %, respectively. Mzuzu and Malindi starches possessed lower gelatinization temperature. The high gelatinization peak viscosity (2248 ± 67–2897 ± 71 cP), low breakdown (556 ± 7–960 ± 41 cP) and low setback (583 ± 29–864 ± 118 cP) indicated banana starch could replace chemically cross-linked starch for applications that require stable viscosity. The rheological analysis showed that banana starches exhibited shear thinning behavior and had great processing adaptability. The results all above will provide basic data for the development and utilization of banana starch.

Effect and mechanism of glycerol monostearate dimer (GMS-D) and baking-treatment on the structure, in vitro digestion of gelatinized potato starch-GMS-D

With the increasing progress of society and in-depth scientific research, dietary regulations, especially sustained glucose releases, are regarded as an effective and significant way to lighten or even cut the emergence of diabetes. In this research, the starch-lipid complex gelatinized potato starch-glycerol monostearate dimer (GPS-GMS-D) was developed to provide a low-glycemic index functional food component for type 2 diabetes. Briefly, the higher complexation index (CI, 71.02%), lower rapidly digestible starch (RDS, 35.57%), and lower estimated glycemic index (eGI, 52.34%) were referred to as GPS-GMS-D. It was assumed that the solid V-type crystal structure, induced with the helix between GMS-D and GPS due to high amylose, high saturation, and low steric hindrance, contributed to the lower digestibility. In addition, baking treatment for 5 min was systematically exerted to improve the flavor of GPS-GMS-D with a relatively high CI (59.98%) and low eGI (54.15%). It was believed that rapid dehydration and close interaction during baking treatment could slow down the decomposition of GPS-GMS-D and conversions of starch fractions. Therefore, these results suggested that the as-developed GPS-GMS-D was a promising low GI functional dietary food component for diabetes mellitus, and a suitable baking post-thermal treatment was successfully proposed to enhance the flavor of GPS-GMS-D. PRACTICAL APPLICATION: The higher amylose and solid V-type crystal structure in gelatinized potato starch-glycerol monostearate dimer (GPS-GMS-D) would induce the formation of slowly digestive starch (SDS) and resistant starch (RS) to suppress enzymatic hydrolysis. Moreover, the flavor of GPS-GMS-D was enhanced with appropriate and moderate thermal processing (baking), which was likely to improve the quality of life of a person with diabetes. Thus, we believe that GPS-GMS-D is a promising functional food component for diabetes mellitus.

Physicochemical and Digestible Properties of Parboiled Black Rice With Different Amylose Contents

The varieties of black rice with different amylose contents (waxy; medium-amylose: 16.03%; high-amylose: 27.14%) were parboiled and then evaluated for physicochemical and digestible properties. The color, crystalline structure, and swelling property of parboiled rice were analyzed, and the water molecular mobility, texture, and starch digestibility of cooked parboiled rice were determined. The color of black rice was only slightly changed after the parboiling treatment. The crystalline structures of waxy and medium-amylose rice were severely damaged by the parboiling treatment, while the highly crystalline structure was retained in parboiled high-amylose rice. During heating in water, parboiled high-amylose rice had a lower water absorption ratio (WAR) and volume expansion ratio (VER) than the other two varieties. After cooking, parboiled high-amylose rice had higher water molecular mobility and harder texture compared with the other two varieties. Cooked parboiled high-amylose rice contained higher content of resistant starch than cooked parboiled waxy and medium-amylose rice.

Enhancing the UV-Light Barrier, Thermal Stability, Tensile Strength, and Antimicrobial Properties of Rice Starch-Gelatin Composite Films through the Incorporation of Zinc Oxide Nanoparticles

The effects of zinc oxide nanoparticles (ZnONPs) on the properties of rice starch−gelatin (RS−G) films were investigated. ZnONPs were synthesized by a green method utilizing Asiatic pennywort (Centella asiatica L.) extract. The ZnONPs were rod-shaped, with sizes ranging from 100−300 nm. An increase in the concentration of ZnONPs significantly (p < 0.05) increased the thickness (0.050−0.070 mm), tensile strength (3.49−4.63 MPa), water vapor permeability (5.52−7.45 × 10−11 g m/m2 s Pa), and thermal stability of the RS−G−ZnONPs nanocomposite films. On the other hand, elongation at break (92.20−37.68%) and film solubility (67.84−30.36%) were significantly lower (p < 0.05) than that of the control RS−G film (0% ZnONPs). Moreover, the addition of ZnONPs strongly affected the film appearance, color, transmission, and transparency. The ZnONPs had a profound effect on the UV-light barrier improvement of the RS−G film. The crystalline structure of the ZnONPs was observed in the fabricated nanocomposite films using X-ray diffraction analysis. Furthermore, the RS−G−ZnONPs nanocomposite films exhibited strong antimicrobial activity against all tested bacterial strains (Staphylococcus aureus TISTR 746, Bacillus cereus TISTR 687, Escherichia coli TISTR 527, Salmonella Typhimurium TISTR 1470) and antifungal activity toward Aspergillus niger. According to these findings, RS−G−ZnONPs nanocomposite film possesses a potential application as an active packaging: antimicrobial or UV protective.

Rheology, stability, antioxidant properties, and curcumin release of oil-in-water Pickering emulsions stabilized by rice starch nanoparticles

Modification of rice starch nanoparticles (SNP) as an emulsifier in Pickering emulsions is reported in this work. The SNP was prepared by HCl hydrolysis with different resident times and subsequently modified via crosslinking by citric acid using various crosslinking times to improve the hydrophobicity of SNP. The modified SNP was used to prepare sunflower oil-in-water Pickering emulsions loaded with curcumin. The optimal hydrolysis conditions (2.2 M HCl, 6 days) produced SNP with a 21.87 ± 0.69 % yield and 45.56 ± 0.00 % crystallinity. The citric acid-modified SNP with a 6-h crosslinking period (SNP-M-6 h) had a water contact angle of 87.2°. The suitable Pickering emulsion containing 30 wt% curcumin-loaded sunflower oil was stabilized by 3.0 wt% SNP-M-6 h. This Pickering emulsion had shear thinning properties with a pseudoplastic fluid behavior and was characterized by a droplet size of 47.16 ± 4.22 μm with a high degree of stability over five weeks of storage. Furthermore, the curcumin release from the emulsion depended on the pH, and curcumin could maintain its free radical scavenging quality. A very beneficial property of the Pickering emulsion is that it can slowly release curcumin at low pH, but more rapid release at higher pH, making it a potentially excellent candidate for drug delivery through oral intake.

Application of Two-Stage Variable Temperature Drying in Hot Air-Drying of Paddy Rice

The aim of this study was to investigate the effect of two-stage variable temperature drying (VTD) on the quality and drying efficiency of paddy rice in the hot air-drying process. A constant temperature of 50 °C (CTD) was used as a control group. VTD and CTD methods were applied in a 15 ton batch type recirculating grain dryer. Three aspects (appearance quality, physical and chemical properties, taste quality) of the paddy rice samples from the dryer were measured and compared. It was observed that paddy rice with an initial moisture content of 25.3% (wet basis) was dried to 14% (wet basis). Compared to CTD, the VTD method could reduce the drying time and fissuring rate by 0.7 h and 42%, respectively. It had a head rice yield (HRY) of 78.45%, compared to 76.45% by CTD. The fatty acid content of the VTD samples was 2.28% lower than those of CTD, and it exhibited a 34% decrease in amylose content. These results show that two-stage VTD is an advanced hot air-drying method that can be used to improve the quality of dried paddy rice, maintain efficiency, and reduce the cost of the drying process by minimizing the rate of energy consumption.

Microwave Cooking Enriches the Nanoscale and Short/Long-Range Orders of the Resulting indica Rice Starch Undergoing Storage

The chain reorganization of cooked starch during storage plays an important role in the performance of starchy products such as rice foods. Here, different analytical techniques (such as small-angle X-ray scattering) were used to reveal how microwave cooking influences the chain assembly of cooked indica rice starch undergoing storage for 0, 24, or 48 h. While stored, more short-range double helices, long-range crystallites, and nanoscale orders emerged for the microwave-cooked starch than for its conventionally cooked counterpart. For instance, after storage for 24 h, the microwave-cooked starch contained 46.8% of double helices, while its conventionally cooked counterpart possessed 34.3% of double helices. This could be related to the fact that the microwave field caused high-frequency movements of polar groups such as hydroxyls, which strengthened the interactions between starch chains and water molecules and eventually their assembly into double helices, crystallites, and nanoscale orders. This work provides further insights into the chain reassembly of microwave-cooked starch undergoing storage, which is closely related to the quality attributes of starch-based products.

An Insight into the Gelatinization Properties Influencing the Modified Starches Used in Food Industry: A review

Native starch is subjected to various forms of modification to improve its structural, mechanical, and thermal properties for wider applications in the food industry. Physical, chemical, and dual modifications have a substantial effect on the gelatinization properties of starch. Consequently, this review explores and compares the different methods of starch modification applicable in the food industry and their effect on the gelatinization properties such as onset temperature (To), peak gelatinization temperature (Tp), end set temperature (Tc), and gelatinization enthalpy (ΔH), studied using differential scanning calorimetry (DSC). Chemical modifications including acetylation and acid hydrolysis decrease the gelatinization temperature of starch whereas cross-linking and oxidation result in increased gelatinization temperatures. Common physical modifications such as heat moisture treatment and annealing also increase the gelatinization temperature. The gelatinization properties of modified starch can be applied for the improvement of food products such as ready-to-eat, easily heated or frozen food, or food products with longer shelf life.

An insight into microscopy and analytical techniques for morphological, structural, chemical, and thermal characterization of cellulose

Cellulose obtained from plants is a bio-polysaccharide and the most abundant organic polymer on earth that has immense household and industrial applications. Hence, the characterization of cellulose is important for determining its appropriate applications. In this article, we review the characterization of cellulose morphology, surface topography using microscopic techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Other physicochemical characteristics like crystallinity, chemical composition, and thermal properties are studied using techniques including X-ray diffraction, Fourier transform infrared, Raman spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. This review may contribute to the development of using cellulose as a low-cost raw material with anticipated physicochemical properties. HIGHLIGHTS: Morphology and surface topography of cellulose structure is characterized using microscopy techniques including optical microscopy, transmission electron microscopy, scanning electron microscopy, and atomic force microscopy. Analytical techniques used for physicochemical characterization of cellulose include X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and thermogravimetric analysis.

Differences in starch multi-layer structure, pasting, and rice eating quality between fresh rice and 7 years stored rice

With the continuous improvement of rice production capacity and the accumulation of reserves year by year, rice sometimes has to be stored for a long time. However, long-term storage of rice has poor sensory properties, which may be related to the structural changes of starch. Different from the previous studies on short-term storage of rice (often 3–12 months), the focus of this study was to understand the differences in starch multi-layer structure, pasting, and rice eating quality between 7 years stored rice and fresh rice. Our research indicated that 7 years stored rice showed higher hardness and lower stickiness compared to fresh rice, which ultimately led to poorer eating quality. These bad changes were related to differences in starch multi-layer structure. The 7 years stored rice had lower amylose content, a lower thickness of crystalline lamellae and short-range ordered structure of starch, and more large starch granules. In particular, the volume mean diameter of 7 years starch was more than 4 times that of fresh starch. 7 years stored rice had more large granular starch and unstable crystal structure, which led to the increase of pasting temperature and the decrease of gelatinization enthalpy during starch gelatinization, and ultimately reduced the eating quality of the rice.

•

7 years stored rice had higher hardness and poorer eating quality.

•

Volume mean diameter of 7 years stored starch was 4 times larger than fresh starch.

•

7 years stored rice had lower short-range order structure of starch.

•

The pasting temperature of 7 years stored starch was higher than fresh starch.

•

Higher pasting temperature and lower gelatinization enthalpy reduced the eating quality.