Tannic acid-fortified zein-pectin nanoparticles: Stability, properties, antioxidant activity, and in vitro digestion

Gliadin hydrolysates nanoparticles improve the bioavailability and antioxidant activity of berberine

Berberine (BBR) is an alkaloid with multiple physiological activities, but its low bioavailability limits its effectiveness in vivo. This study developed soluble nano delivery carriers using gliadin hydrolysates (GLH) to enhance BBR's bioavailability. The research evaluated the encapsulation efficiency, stability, release characteristics, and antioxidant capacities of GLH-BBR nanoparticles (GLH-BBR NPs) both in vitro and in vivo. Results showed that at a 5:1 GLH-to-BBR mass ratio, the encapsulation efficiency reached 74.95 %. GLH-BBR NPs increased DPPH radical scavenging from 19.19 % to 40.28 % and ABTS radical scavenging from 4.26 % to 60.96 %, compared to BBR alone. In vitro tests showed that GLH-BBR NPs inhibited BBR release during gastric digestion and promoted sustained release in the intestine. In addition, GLH-BBR NPs enhanced BBR's bioavailability and in vivo antioxidant activity. These findings support the development of sustainable peptide byproducts for high-quality delivery platforms.

Characterization of physicochemical properties of different epigallocatechin-3-gallate nanoparticles and their effect on bioavailability

Epigallocatechin-3-gallate (EGCG), a major catechin in green tea, exhibits potent antioxidant and disease-preventive properties, but its application is limited by poor stability and bioavailability. This study aimed to address these challenges by preparing and characterizing three EGCG-loaded nanoparticles: chitosan-EGCG-tripolyphosphate nanoparticles (CE-NPs), β-cyclodextrin-EGCG (BE-NPs), and EGCG-nanostructured lipid carriers (NE-NPs). BE-NPs exhibited the highest loading performance and retention rate under thermal environment (89.78 % after 10 h at 80 °C). NE-NPs had the highest EGCG stability in alkaline condition (45 % after 4 h at pH 7.4). Compared to free EGCG, all NPs significantly improved in vitro bioaccessibility following incubation in simulated gastrointestinal digestion for 4 h; BE-NPs enhanced oral bioavailability by 1.71 times in vivo. Additionally, CE-NPs and NE-NPs increased the relative abundance of Faecalibaculum, Erysipelotrichaceae, and Bifidobacterium in the colons of Sprague-Dawley rats. These findings suggest that BE-NPs are a promising nano-delivery system for enhancing EGCG stability and bioavailability in healthy organisms.

An antioxidant composite film based on loquat seed starch incorporating resveratrol-loaded core-shell nanoparticles

A Novel bioactive food packaging film was prepared from non-grain sourced loquat seed starch (LSS) incorporated with resveratrol-loaded nanoparticles (NRs) based on a zein/pectin core-shell system, where the NRs were prepared using the anti-solvent method. The chemical constitution of the LSS was analyzed. The film was characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The physical, optical, and antioxidant properties of the films were also identified. The results showed that incorporating NRs into the films significantly increased antioxidation activity, although simultaneously decreasing light transmission, water content, and elongation at break properties. Furthermore, NRs (15 %) facilitated strong hydrogen bonding interactions with the LSS matrix, improving the barrier properties and tensile strength. The resveratrol release behavior of the composite films in ethanol solutions (10 % and 95 % in water, v/v) as a food simulant was also investigated. The LSS/NRs composite film is effective in delaying unwanted oxidation during the storage of soybean oil. In conclusion, LSS could be applied as a good film-forming matrix, and LSS films containing NRs exhibit excellent physical properties and antioxidant activity, making them ideal for convenience foods containing a grease mixture of spices and grease-class packaging.

Bionanocomposite of Dual Antioxidant and Protease Function by Co-Immobilization of Tannic Acid and Papain on Anionic Clays

The synchronized operation of antioxidants and enzymes is necessary for the proper functioning of living organisms and various industrial processes. The drawback that these biomolecules are susceptible to several environmental factors can be overcome by their immobilization on appropriate host materials. Here, molecular antioxidant tannic acid (TA) and papain enzyme (PPN) were co-immobilized on layered double hydroxide (LDH) nanoparticles to enhance their stability and facilitate their combined function. In the sequential adsorption method governed by electrostatic interactions, TA was first adsorbed on oppositely charged LDH (LDH/TA) and then, PPN was immobilized on the surface of the nanoparticles (LDH/TA/PPN). The optimal TA and PPN doses were determined by systematic size and charge measurements of the particles in dispersions to obtain stable colloids in each preparation step. The co-immobilization of the biomolecules was confirmed by spectroscopy methods. The resulting LDH/TA/PPN nanocomposite exhibited remarkable antioxidant and protease activities. The dual biological function together with the considerable colloidal stability make the LDH/TA/PPN material a promising candidate in various processes in academia and more applied disciplines, where simultaneous antioxidant and proteolytic functions are desired.

Optimization of Zein-Casein-Hyaluronic Acid Nanoparticles Obtained by Nanoprecipitation Using Design of Experiments (DoE)

Zein-based nanoparticles offer significant potential as carriers for drug delivery due to their biocompatibility. However, optimizing their formulation is essential to achieving efficient encapsulation and stability. This study aimed to optimize the formulation of zein-casein-hyaluronic acid-based nanoparticles for the encapsulation of a hydrophilic drug, focusing on achieving favorable physicochemical properties for oral drug delivery applications. A factorial experimental design was employed to evaluate the influence of key formulation parameters, including zein concentration, hyaluronic acid concentration, sodium caseinate concentration, and the organic-to-aqueous phase (O/W) ratio. Particle size (PS), polydispersity index (PDI), zeta potential, and encapsulation efficiency (EE) were analyzed as response variables. Multivariate analyses, such as hierarchical cluster analysis and principal component analysis, were performed to explore the relationships between formulation parameters and nanoparticle properties. Model validity was confirmed by using ANOVA and residual analysis. Optimized nanoparticles exhibited a PS of 217 ± 5 nm, PDI of 0.077 ± 0.022, zeta potential of -24.7 ± 1.9 mV, and EE of 31% ± 4. The nanoparticles displayed a monomodal size distribution and a spherical morphology. Multivariate analyses revealed that the O/W ratio and zein concentration were the most influential factors, while sodium caseinate played a crucial stabilizing role. The desirability function yielded a high score (D = 0.9338), confirming the robustness of the optimization process. Stability studies demonstrated that refrigeration at 8 °C preserved the nanoparticles' physicochemical properties over 180 days. This study underscores the power of experimental design as a tool to refine nanoparticle formulations, paving the way for more efficient drug delivery systems and unlocking new possibilities for the oral administration of hydrophilic compounds.

Development of faba protein-tannic acid conjugate via free radical grafting: Evaluation of interaction mechanisms and antioxidative properties

A soluble fraction of faba bean protein was conjugated with tannic acid via the free-radical grafting method using a mixture of ascorbic acid and hydrogen peroxide. Surface plasmon resonance showed a strong bonding between them, while the free amino and thiol group measurements indicated tannic acid's bonding with the amino groups and cysteine residues on the proteins. Structural analysis using intrinsic fluorescence and surface hydrophobicity demonstrated tannic acid's interaction with the aromatic and hydrophobic amino acids of the protein. The conjugate showed about 77 % DPPH, 89 % ABTS, and 83 % hydroxyl radical scavenging activities and superior ferric-reducing ability compared to the protein alone and the mixture of protein and tannic acid. Electron paramagnetic resonance (EPR) spectroscopy revealed 97.8 % radical scavenging ability of the conjugate, comparable to the pure tannic acid. The exceptional antioxidative properties of conjugate can be utilized to delay lipid oxidation in protein-stabilized oil-in-water emulsions.

Influence pathways of covalent and non-covalent interactions on the stability of deamidated gliadin-tannic acid-based Pickering emulsions

This study aimed to elucidate the pathways through which covalent and non-covalent interactions between deamidated gliadin (DG) and tannic acid (TA) on influence the stability of Pickering emulsions. The interactions induced protein unfolding, as evidenced by increased ultraviolet absorption and a red shift in fluorescence emission. DG-TA composite nanoparticles effectively stabilized high internal phase emulsions, whereas DG nanoparticles alone did not. Covalent DG-TA nanoparticle stabilized Pickering emulsions (C-DGTAE) retained a consistent mean droplet size after 30 d of storage. Lipid hydroperoxide and malondialdehyde levels in C-DGTAE and N-DGTAE were reduced by 59.1 %-69.5 % and 38.9 %-44.4 %, respectively. Furthermore, the retention of β-carotene in the emulsions was significantly enhanced. All emulsions exhibited elastic behavior, characterized by higher G' than G″. Notably, N-DGTAE demonstrated the highest apparent viscosity, G' and G″, attributed to the connected nanoparticles around the droplets. Confocal laser scanning microscopy revealed that C-DGTAE droplets possessed the thickest layer, corroborated by the highest interfacial nanoparticle content of 76 % and an interfacial thickness of 441 nm. These findings suggest that covalent interactions enhance the interfacial nanoparticle layer, while non-covalent interactions promote nanoparticle networking, providing valuable insights for optimizing the stability of Pickering emulsions.

Sea buckthorn Flavonols extract co-loaded Zein/gum Arabic nanoparticles: Evaluating cellular absorption in Caco-2 cells and antioxidant activity in HepG2 cells

Improving sea buckthorn flavonoids (SF) stability and bioacccessibility is of more practical significance for evaluating the total bioacccessibility of such foods. Therefore, we prepared nanoparticles using zein and gum Arabic (GA) by anti-solvent precipitation to encapsulate SF. Nanoparticles were characterized and assessed for their effect on the stability, release, bioaccessibility, absorption, and antioxidant properties of SF in the in vitro digestion and cell line. The uniform, regular nanoparticles achieved 77.19 % encapsulation efficiency. The SF retention rates during long-term storage (60.46 %) and in vitro digestion (53.76 %) demonstrated that nanoparticles exhibited good stability and bioaccessibility compared to free SF. Furthermore, cellular absorption, the free radical scavenging rate for ABTS (85.26 %) and DPPH (80.48 %), as well as inhibitory effects on intracellular ROS further demonstrated that bilayer nanoparticles could successfully protect and exert biological characteristics of SF. This study evaluated the overall bioaccessibility of sea buckthorn flavonoids using a nanoparticle delivery system, which holds even greater significance for guiding the development of this category of natural foods.

Production, characterization, and application of zein-polyphenol complexes and conjugates: A comprehensive review

The corn protein zein has several advantages, such as low production cost, excellent biodegradability, good biocompatibility, and low allergenicity. However, the application of zein in the food industry is limited by its high hydrophobicity. To increase the functionality of zein and meet the diverse requirements of food systems, researchers have explored several methods to form complexes or conjugates through noncovalent or covalent interactions, respectively, with polyphenols. This paper comprehensively reviews the formation mechanisms, preparation methods, and influencing factors of zein-polyphenol complexes and conjugates. In addition, the paper presents the techniques used to characterize zein-polyphenol complexes and conjugates and their various new functional properties and bioactivities including water solubility, emulsification activity, in vitro antioxidant activity and antibacterial activity, as well as factors that affect these properties. Furthermore, the potential uses of these compounds in the food sector and future research areas are discussed.

Encapsulation of melatonin in zein/pectin composite nanoparticles: Fabrication, characterization, and in vitro release property

In this study, the encapsulation of melatonin (MT) in zein nanoparticles was investigated via anti-solvent co-precipitation method with pectin stabilization. Compared with MT-loaded zein nanoparticles (MT-Z NPs), 1.0 mg/mL pectin led to a 92.1 % of MT encapsulation efficiency, a 5.4 % of MT loading, a particle size growth from 111.3 to 294.8 nm, a ζ-potential reduction from +4.8 to -41.4 mV, and an irregular surface shape. Moreover, the hypsochromic and redshifts of the OH and amide I bands, and undetected MT crystalline characteristic peaks in MT-loaded zein/pectin nanoparticles (MT-Z/P NPs) revealed successful MT embedment governed by hydrogen and hydrophobic forces. The binding energies of zein with MT and pectin (-6.89 and - 7.01 kcal/mol) confirmed the stability of complex. MT-Z/P NPs prolonged MT release from 92.3 % to 63.6 % at 6 h in gastrointestinal tract (GIT) compared with MT-Z NPs, which could be a desirable MT delivery material in food industry.

Enhancing mechanical and blocking properties of gelatin films using zein-quercetin nanoparticle and applications for strawberry preservation

New gelatin films incorporated with zein-quercetin nanoparticles (GA/ZQNPs) were developed. The GA/ZQNP films had improved tensile strength, water vapor and oxygen barrier capabilities, hydrophobicity, UV blocking feature, antioxidant activities and antimicrobial properties, which varied with various contents of ZQNPs. Notably, the GA/ZQNP0.1-10 films exhibited enhanced tensile stress value around 3.2 MPa and strain of 142 %, a 78.4 % decrease in water vapor permeability, a 76.9 % decrease in oxygen permeability, the highest water contact angle at 112.0 ± 0.6°, an improved DPPH∙ scavenging rate of 64.9 ± 0.7 %, excellent UV blocking properties and antimicrobial properties. The GA/ZQNP films were further applied for strawberries packaging to assess their preservation capabilities under ambient conditions. The results showed that GA/ZQNP0.1-10 nanocomposite films efficiently maintained the best nutrient quality and acceptable appearance of strawberries compared with untreated strawberries, prolonging the shelflife of strawberries to approximately 8 days. These findings suggested promising applications for these new functional films in fruit packaging.

Assembly of foxtail millet prolamin/chitosan hydrochloride/carboxymethyl-beta-cyclodextrin in acetic acid aqueous solution for enhanced curcumin retention

The aim of this work is to investigate the assembly of foxtail millet prolamin (FP) with chitosan hydrochloride (CHC) and carboxymethyl-beta-cyclodextrin (CMCD) in acetic acid aqueous solutions. The proportion of acetic acid has a positive impact on the disintegration of FP. With the use of 91.0 % (v/v) acetic acid, FP forms smaller particles of approximately 45 nm (naked FP particles) and 220 nm (FP - CHC - CMCD hybrid particles). In the case of using 61.5 % (v/v) acetic acid, the microstructures of bare FP particles and 570 nm composite FP nanoparticles (NPs) are looser, about 485 nm. Acetic acid inhibits the noncovalent bonds, including the hydrophobic interactions, hydrogen bonding and electrostatic attractions between FP and polysaccharides. Therefore, 3.8 % (v/v) acetic acid can nucleate FP to form more compact FP hybrid particles for delivering curcumin (Cur) with higher encapsulation efficiency, storage stability and release performance, and improve the antibacterial and anticancer activity of Cur.

Preparation, characterization, formation mechanism, and stability studies of zein/pectin nanoparticles for the delivery of prodigiosin

Prodigiosin (PG) is a natural compound produced by microorganisms, that is known for its promising bioactive properties. However, owing to its inherent water insolubility, low bioavailability, and poor stability, the practical application of prodigiosin remains challenging. In this work, the nanoparticles of prodigiosin-loaded zein-pectin were prepared using electrostatic deposition and antisolvent precipitation methods. The encapsulation efficiency and loading capacity of prodigiosin in Z-Pet/PG 2:1 nanoparticles were 89.05 % and 7.49 %, respectively, with a zeta potential of -23.03 mV, with a particle size was 184.13 nm. The nanoparticles were uniformly distributed and possessed a spherical morphology, as determined using scanning electron microscopy. The formation mechanism between nanoparticles has been investigated using circular dichroism, fluorescence spectroscopy, molecular docking, and Fourier-transform infrared spectroscopy, which indicated stabilization predominantly through electrostatic, hydrophobic, and hydrogen-bonding interactions. Furthermore, Z-Pet/PG 2:1 nanoparticles proved remarkable stability across a pH range from 3 to 7, NaCl concentrations below 50 mmol/L, at elevated temperatures (60, 70, and 80 °C) for 1 h, and at redispersion. Prodigiosin was progressively delivered by the nanoparticles in simulated gastrointestinal settings, with a cumulative release rate of 75.32 % in simulated intestinal fluid, thereby demonstrating enhanced bioavailability and allowing for a controlled and sustained-release in vitro. These findings indicate that Z-Pet/PG nanoparticles are a promising delivery platform for prodigiosin, and are potentially applicable to other hydrophobic compounds with limited bioavailability.

Antimicrobial activity and cytotoxic and epigenetic effects of tannic acid-loaded chitosan nanoparticles

Tannic acid (TA) is a potent antitumor agent, but its low bioavailability and absorption limit its use. In this study, it was loaded into chitosan-based nanoparticles (Chi-NPs) to overcome these limitations and to improve its antimicrobial and anticancer activities. TA-loaded Chi-NPs (Chi-TA-NPs) were synthesized using the ionic gelation method and physicochemically characterized by FE-SEM, FTIR, XRD, PDI, DLS, and zeta potential analysis. Additionally, the antimicrobial activity of Chi-TA-NPs against two G+ bacterial strains, two G- bacterial strains, and a fungal strain (Candida albicans) was investigated using the microbroth dilution method. MTT assay was used to examine the cytotoxic effects of Chi-TA-NPs on HepG2 cells. The expression of DNA methyltransferase 1 (DNMT1), DNMT3A, and DNMT3B was examined in HepG2 cells using RT-qPCR. The amount of 5-methylcytosine in the HepG2 cell-derived genomic DNA was measured using ELISA. FE-SEM micrographs showed the loading of TA into the chitosan-based formulation. The peaks detected in the XRD and FTIR analyses confirmed the formation of the Chi-TA-NPs. The PDI value (0.247 ± 0.03), size (567.0 ± 25.84 nm), and zeta potential (17.0 ± 5.86 mV) confirmed the relative stability of Chi-TA-NPs. A constant release profile in line with the Korsmeyer-Peppas model was detected for Chi-TA-NPs, such that approximately 44% of TA was released after 300 min. In addition, Chi-TA-NPs exhibited effective antimicrobial activity against the studied microbial strains, as manifested by MIC values ranging from 250 to 1000 µg/mL. Chi-TA-NPs induced cytotoxicity in liver tumor cell line, with an IC50 value of 500 µg/mL. Furthermore, Chi-TA-NPs considerably decreased the expression of DNMT1 (2.52-fold; p = 0.01), DNMT3A (2.96-fold; p = 0.004), and DNMT3B (2.94-fold; p < 0.0001). However, 5-methylcytosine levels in HepG2 cells were unaffected by Chi-TA-NPs treatment (p = 0.62). Finally, the antimicrobial, cytotoxic, and epigenetic effects of Chi-TA-NPs were more pronounced than those of free TA and the unloaded Chi-NPs. In conclusion, Chi-TA-NPs exhibit promising potential for reducing microbial growth and promoting cytotoxicity in liver cancer cells.

Current status and future developments of biopolymer microspheres in the field of pharmaceutical preparation

Polymer composite microspheres offer several advantages including highly designable structural properties, adjustable micro-nano particle size distribution, easy surface modification, large specific surface area, and high stability. These features make them valuable in various fields such as medicine, sensing, optics, and display technologies, with significant applications in clinical diagnostics, pathological imaging, and drug delivery in the medical field. Currently, microspheres are primarily used in biomedical research as long-acting controlled-release agents and targeted delivery systems, and are widely applied in bone tissue repair, cancer treatment, and wound healing. Different types of polymer microspheres offer distinct advantages and application prospects. Efforts are ongoing to transition successful experimental research to industrial production by expanding various fabrication technologies. This article provides an overview of materials used in microsphere manufacturing, different fabrication methods, modification techniques to enhance their properties and applications, and discusses the role of microspheres in drug delivery engineering.

Characterization of pectin-zein nanoparticles encapsulating tanshinone: Antioxidant activity, controlled release properties, physicochemical stability to environmental stresses

Tanshinone compounds, natural antioxidants found in the roots of Salvia subg Perovskia plants, offer various health benefits and can serve as natural food additives, replacing synthetic antioxidants. In this study, the nanoparticles were created using the antisolvent method, which were then evaluated for their antioxidant and antibacterial properties, as well as their ability to release tanshinone and withstand environmental stress. The results of the study demonstrated a significant improvement in the antioxidant capabilities of tanshinone with the nanoparticle coating. The T/Z/P NPs exhibited enhanced tanshinone release under simulated gastrointestinal conditions compared to T/Z nanoparticles. These nanoparticles displayed remarkable stability against fluctuations in environmental pH and thermal conditions. The study also revealed that the critical flocculation concentration of the system was 0.5 M of salt. Furthermore, the T/Z/P NPs showed good stability during storage at 4°C for 30 days, making them an excellent candidate for use in various food products.

Design strategies of polysaccharide, protein and lipid-based nano-delivery systems in improving the bioavailability of polyphenols and regulating gut homeostasis

Polyphenols are plant secondary metabolites that have attracted much attention due to their anti-inflammatory, antioxidant, and gut homeostasis promoting effects. However, food matrix interaction, poor solubility, and strong digestion and metabolism of polyphenols cause barriers to their absorption in the gastrointestinal tract, which further reduces bioavailability and limits polyphenols' application in the food industry. Nano-delivery systems composed of biocompatible macromolecules (polysaccharides, proteins and lipids) are an effective way to improve the bioavailability of polyphenols. Therefore, this review introduces the construction of biopolymer-based nano-delivery systems and their application in polyphenols, with emphasis on improving the solubility, stability, sustained release and intestinal targeting of polyphenols. In addition, there are possible positive effects of polyphenol-loaded nano-delivery systems on modulating gut microbiota and gut homeostasis, with particular emphasis on modulating intestinal inflammation, metabolic syndrome, and gut-brain axis. It is worth noting that the safety of bio-based nano-delivery systems still need to be further studied. In summary, the application of the bio-based nano-delivery system to deliver polyphenols provides insights for improving the bioavailability of polyphenols and for the treatment of potential diseases in the future.

Pickering emulsion gel of polyunsaturated fatty acid-rich oils stabilized by zein-tannic acid green nanoparticles for storage and oxidation stability enhancement

HYPOTHESIS

Poor storage stability and oxidative deterioration are the common drawbacks of edible oils rich in polyunsaturated fatty acids (PUFAs). We hypothesized that the natural zein/tannic acid self-assembly nanoparticles (ZT NPs) could be employed as stabilizers to anchor at the oil-water interface, thus constructing Pickering emulsion gel (PKEG) system for three types of PUFA-rich oils, soybean oil (SO), fish oil (FO) and cod liver oil (CLO), to improve the storage and oxidation stability.

EXPERIMENTS

ZT NPs were prepared by the anti-solvent coprecipitation method, and the three-phase contact angle, FT-IR, and XRD were mainly characterized. To observe the shell-core structure and oil-water interface details of SO/FO/CLO PKEGs by confocal laser scanning microscope and cryo-scanning electron microscope. Accelerated oxidation of FO was performed to assess the protective effect of PKEG on lipids.

FINDINGS

The SO, FO, and CLO PKEGs stabilized by 2 % ZT NPs, with oil fraction (φ = 0.5-0.6), were obtained. PKEGs show high viscoelasticity, clear shell-core structure spatial network structure, and ideal storage stability. Under accelerated oxidation, the degree of oxidative rancidity of FO PKEG was obviously lower than that of free FO. Overall, this work opens up new possibilities for using natural PKEG to prevent oxidative deterioration and prolong the shelf-life of PUFA-rich oils.

A synergistic influence of gallic acid/ZnO NPs to strengthen the multifunctional properties of methylcellulose: A conservative approach for tomato preservation

Biodegradable and sustainable food preservation materials have gained immense global importance to mitigate plastic pollution and environmental impact. Biopolymers like cellulose offer significant advantages for food preservation, including biodegradability and the ability to extend shelf life. Therefore, the present study aims to prepare gallic acid (GA) and zinc oxide nanoparticles (ZnO NPs) incorporated methylcellulose (MC) composite films by employing a solvent casting technique. The homogeneous SEM micrographs and FTIR spectra evidenced high compatibility among MC and GA/ZnO NPs. The UV barrier capacity, mechanical properties and surface hydrophobicity are remarkably enhanced by GA/ZnO NPs. However, the water vapour permeability and oxygen permeability of MGZ films were reduced by 49.19 % and 57.75 % respectively. Moreover, the MGZ films demonstrated exceptional antioxidant efficacy (∼94.48 %) and inhibition against food-borne pathogens such as B. subtilis, S. aureus (Gram-positive), E. coli, P. aeruginosa (Gram-negative), and C. albicans fungi. Furthermore, the GA/ZnO NPs extended the shelf life of MGZ coated tomato samples up to 27 days and exhibited controlled microbial growth after the preservation study. These results support the application of MGZ films as suitable and effective coating materials for food packaging applications.

Effect of non-covalent binding of tannins to sodium caseinate on the stability of high-internal-phase fish oil emulsions

In this study, we designed the noncovalent binding of sodium caseinate (SC) to tannic acid (TA) to stabilize high internal phase emulsions (HIPEs) used as fish oil delivery systems. Hydrogen bonding was the dominant binding force, followed by weak hydrophobic interaction and weak van der Waals forces, as demonstrated by FTIR, fluorescence spectroscopy, and molecular docking experiments, with a binding constant of 3.25 × 106, a binding site of 1.2, and a static quenching of the binding. Increasing SC:TA from SC to 2:1 decreased the particle size from 107.37 ± 10.66 to 76.07 ± 2.77 nm and the zeta potential from -6.99 ± 2.71 to -22 ± 2.42 mV. TA increased the interfacial tension of SC, decreased the surface hydrophobicity from 1.3 × 104 to 1.6 × 103 and improved the oxidation resistance of SC. The particle size of high internal phase emulsions stabilized by complexes with different mass ratios (SC:TA from 1:0 to 2:1) increased from 4.9 ± 0.02 to 12.9 μm, the potential increased from -32.37 ± 2.7 to -35.07 ± 2.58 mV, and the instability index decreased from 0.75 to 0.02. Thicker interfacial layers could be observed by laser confocal microscopy, and an increase in the storage modulus indicated a formation of a stronger gel network. SC:TA of 1:0 showed emulsion breakage after 14 d of storage at room temperature. SC:TA of 2:1 showed the lowest degree of oil-water separation after freeze-thaw treatment. Especially, the most stable high endo-phase emulsion (at SC:TA of 2:1) prepared at each mass ratio was selected for further stability exploration. The emulsion particle size increased only from 15.63 ± 0.06 to 22.27 ± 0.35 μm at salt ion concentrations of 50-200 mM and to 249.33 ± 31.79 μm at 300 mM. The instability index and storage modulus of the high endo-phase emulsions increased gradually with increasing salt ion concentrations. At different heating temperatures (55-85 °C), the instability index of the high internal phase emulsion gradually decreased and the storage modulus gradually increased. Meanwhile, at 50 °C for 15 d of accelerated oxidation, the content of hydroperoxide decreased from 53.32 ± 0.18 to 37.48 ± 0.77 nmol/g, about 29.7 %, and the thiobarbituric acid value decreased from 1.06 × 103 to 0.8 × 103, about 24.5 %, in the high endo-phase emulsions prepared by 2:1 SC:TA compared to the fish oils, and the SC-stabilized high endo-phase only emulsion broke at the sixth day of oxidation. From the above findings, it was concluded that the high internal phase emulsion prepared with SC:TA of 2:1 can be used as a good delivery system for fish oil.

A Review on the Driving Forces in the Formation of Bioactive Molecules-Loaded Prolamin-Based Particles

Prolamin-based particles loaded with bioactive molecules have attracted widespread attention from scientists due to their novel properties in chemistry, physics, and biology. In the self-assembly process of biopolymer-based nanocapsules, noncovalent interactions are the main driving forces for reducing bulk materials to the nanoscale and controlling the release of bioactive molecules. This article reviews the types of interaction forces, binding strength, binding active sites, molecular orientation, and binding affinity that affect the release profile of bioactive molecules during the preparation of protein stabilizer particles. Different preparation formulations, the use of different biopolymers, the inherent nature of the loaded bioactive molecules, and external factors (including pH, biopolymer concentration, temperature, salt, ultrasonication, and atmospheric cold plasma treatment) lead to different types and strengths of intra- and intermolecular interactions. Strategies, such as pH, ultrasonication, and atmospheric cold plasma, to change the protein conformation are key to improving the binding strength between proteins and bioactive substances or stabilizers. This review provides some guidance for scientists and technicians dedicated to improving loading efficiency, delaying release, enhancing colloidal stability, and exploring the binding behavior among proteins, stabilizers, and bioactive molecules.

Fabrication and Application of Tannin Double Quaternary Ammonium Salt/Polyvinyl Alcohol as Efficient Sterilization and Preservation Material for Food Packaging

Food packaging films play a vital role in preserving and protecting food. The focus has gradually shifted to safety and sustainability in the preparation of functional food packaging materials. In this study, a bisquaternary ammonium salt of tannic acid (BQTA) was synthesized, and the bioplastics based on BQTA and polyvinyl alcohol (PVA) were created for packaging applications. The impact of BQTA on antibacterial effect, antioxidant capacity, opacity, ultraviolet (UV) protective activity, mechanical strength, thermal stability, and anti-fog of the resultant bioplastics was examined. In vitro antibacterial experiments confirmed that BQTA possesses excellent antimicrobial properties, and only a trace amount addition of BQTA in PVA composite film could inhibit about 100% of Escherichia coli and Staphylococcus aureus. Compared to BQTA/PVA bioplastics with pure PVA, the experiment findings demonstrate that BQTA/PVA bioplastics show strong antioxidant and UV protection action and the performance of fruit preservation. It also revealed a small improvement in thermal stability and tensile strength. The small water contact angle, even at low BQTA concentrations, gave BQTA/PVA bioplastics good anti-fog performance. Based on the findings, bioplastics of BQTA/PVA have the potential to be used to create packaging, and they can be applied as the second (inner) layer of the primary packaging to protect food freshness and nutrition due to their antioxidant activity and biocompatibility.

Fabrication and characterization of polydopamine-mediated zein-based nanoparticle for delivery of bioactive molecules

In this study, a combination of whey protein (hydrophilic coating) and polydopamine (crosslinking agent) was used to improve the stability and functionality of quercetin-loaded zein nanoparticles. There are two key benefits of the core-shell nanoparticles formed. First, the ability of the polydopamine to bind to both zein and whey protein facilitates the formation of a stable core-shell structure, thereby protecting quercetin from any pro-oxidants in the aqueous surroundings. Second, neutral and hydrophilic whey proteins were used for the surface coating of the nanoparticles to further enhance the sustained and slow release of quercetin, facilitating its sustained release into the body at a slow and steady rate. The results of this study will promote the innovative development of precise nutritional delivery systems for zein and provide a theoretical basis for the design and development of dietary supplements based on hydrophobic food nutrient molecules.

Layer-By-Layer Designed Spark-Type AuCuPt Alloy with Robust Broadband Absorption to Enhance Sensitivity in Flexible Detection of Estriol by a Lateral Flow Immunoassay

Excessive intake of estrogen poses significant health risks to the human body; hence, there is a necessity to develop rapid detection methods to monitor its levels of addition. Gold nanoparticles (AuNPs), commonly utilized as colorimetric signal labels, find extensive application in lateral flow immunoassay (LFIA). However, the detection sensitivity of traditional AuNPs-LFIA is typically constrained by low molar extinction coefficients and reliance on a single signal. Herein, in this work, unique spark-type AuCuPt nanoflowers modified with tannic acid (AuCuPt@TA) were precisely designed by reasonable layer-by-layer element composition and green modification. The obtained AuCuPt displays robust broadband absorption spanning the visible to near-infrared spectrum, showcasing a notable molar extinction coefficient of 2.38 × 1012 M-1 cm-1 and a photothermal conversion efficiency of 48.5%. Based on this, selecting estriol (E3) as a model analyte, colorimetric/photothermal dual-signal LFIA (CLFIA and PLFIA) was developed. Limits of detection (LOD) of the CLFIA and PLFIA were achieved at 0.033 ng mL-1 and 0.021 ng mL-1, respectively, which represent a 9.3- and 14.6-fold improvement compared to the visual LOD of AuNPs-LFIA. Moreover, the application feasibility of the immunoassay was further evaluated in the milk and pork with satisfactory recoveries ranging from 86.21% to 117.91%. Thus, this work has enhanced the performance of LFIA for E3 detection and exhibited enormous potential for other sensing platform construction.

Tannic Acid-Decorated Bimetallic Copper-Gold Nanoparticles with High Catalytic Activity for the Degradation of 4-Nitrophenol and Rhodamine B

In this study, tannic acid (TA) was applied as a stabilizing agent for synthesizing bimetallic copper-gold (CuAu) nanoparticles. Cu(NO3)2 and NaAuCl4 were used as the sources of copper and gold ions, respectively, and NaBH4 was employed as a reducing agent. The prepared TA-CuAu nanoparticles were extensively characterized via ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray diffraction, and zeta potential analyses. To evaluate their catalytic activity, the TA-CuAu nanoparticles and NaBH4 were applied in the degradation of 4-nitrophenol (4-NP) and rhodamine B (RB) individually and in a mixture. The individual degradation of 4-NP and RB was completed within 10 min, and the apparent rate constants were calculated as 0.3046 and 0.2628 min-1, respectively, emphasizing the efficient catalytic activity of the TA-CuAu nanoparticles. Additionally, controlled experiments were performed for the degradation of 4-NP and RB in the absence of catalysts or NaBH4 to investigate the kinetic feasibility of the catalytic reactions. A mixture of 4-NP and RB was successfully degraded within 10 min using the TA-CuAu nanoparticles as catalysts. Furthermore, the reuse of the catalysts after five successive cycles demonstrates an outstanding performance with no significant loss in the catalytic activity. Finally, the successful treatment of the tap and lake water samples spiked with 4-NP and RB using the TA-CuAu nanoparticles further confirmed their application potential as catalysts in environmental water remediation.

Preparation, structural characterization, and functional attributes of zein-lysozyme-κ-carrageenan ternary nanocomposites for curcumin encapsulation

The low water solubility and inadequate bioavailability of curcumin significantly hinder its broad biological applications in the realms of food and medicine. There is limited information currently available regarding the particle characteristics and functional capabilities of zein-lysozyme-based nanomaterials. Thereby, the primary goal of the current work is to effectively develop innovative zein-lysozyme-κ-carrageenan complex nanocomposites (ZLKC) as a reliable carrier for curcumin encapsulation. As a result, ZLKC nanoparticles showed a smooth spherical nanostructure with improved encapsulation efficiency. Fourier-transform infrared, fluorescence spectroscopy, dissociation assay, and circular dichroism analysis revealed that hydrophobic and electrostatic interactions and hydrogen bonding were pivotal in the construction and durability of these composites. X-ray diffraction examination affirmed the lack of crystallinity in curcumin encapsulated within nanoparticles. The incorporation of κ-carrageenan significantly improved the physicochemical stability of ZLKC nanoparticles in diverse environmental settings. Additionally, ZLKC nanocomposites demonstrated enhanced antioxidant and antimicrobial properties, as well as sustained release characteristics. Therefore, these findings demonstrate the potential application of ZLKC nanocomposites as delivery materials for encapsulating bioactive substances.

Oral Delivery of Liraglutide-Loaded Zein/Eudragit-Chitosan Nanoparticles Provides Pharmacokinetic and Glycemic Outcomes Comparable to Its Subcutaneous Injection in Rats

Liraglutide (LIRA) is a glucagon-like peptide-1 (GLP-1) receptor agonist renowned for its efficacy in treating type 2 diabetes mellitus (T2DM) and is typically administered via subcutaneous injections. Oral delivery, although more desirable for being painless and potentially enhancing patient adherence, is challenged by the peptide's low bioavailability and vulnerability to digestive enzymes. This study aimed to develop LIRA-containing zein-based nanoparticles stabilized with eudragit RS100 and chitosan for oral use (Z-ERS-CS/LIRA). These nanoparticles demonstrated a spherical shape, with a mean diameter of 238.6 nm, a polydispersity index of 0.099, a zeta potential of +40.9 mV, and an encapsulation efficiency of 41%. In vitro release studies indicated a prolonged release, with up to 61% of LIRA released over 24 h. Notably, the nanoparticles showed considerable resistance and stability in simulated gastric and intestinal fluids, suggesting protection from pH and enzymatic degradation. Pharmacokinetic analysis revealed that orally administered Z-ERS-CS/LIRA paralleled the pharmacokinetic profile seen with subcutaneously delivered LIRA. Furthermore, in vivo tests on a diabetic rat model showed that Z-ERS-CS/LIRA significantly controlled glucose levels, comparable to the results observed with free LIRA. The findings underscore Z-ERS-CS/LIRA nanoparticles as a promising approach for oral LIRA delivery in T2DM management.

Stability, Digestion, and Cellular Transport of Soy Isoflavones Nanoparticles Stabilized by Polymerized Goat Milk Whey Protein

Soy isoflavones (SIF) are bioactive compounds with low bioavailability due to their poor water solubility. In this study, we utilized polymerized goat milk whey protein (PGWP) as a carrier to encapsulate SIF with encapsulation efficiency of 89%, particle size of 135.53 nm, and zeta potential of -35.16 mV. The PGWP-SIF nanoparticles were evaluated for their stability and in vitro digestion properties, and their ability to transport SIF was assessed using a Caco-2 cell monolayer model. The nanoparticles were resistant to aggregation when subjected to pH changes (pH 2.0 to 8.0), sodium chloride addition (0-200 mM), temperature fluctuations (4 °C, 25 °C, and 37 °C), and long-term storage (4 °C, 25 °C, and 37 °C for 30 days), which was mainly attributed to the repulsion generated by steric hindrance effects. During gastric digestion, only 5.93% of encapsulated SIF was released, highlighting the nanoparticles' resistance to enzymatic digestion in the stomach. However, a significant increase in SIF release to 56.61% was observed during intestinal digestion, indicating the efficient transport of SIF into the small intestine for absorption. Cytotoxicity assessments via the MTT assay showed no adverse effects on Caco-2 cell lines after encapsulation. The PGWP-stabilized SIF nanoparticles improved the apparent permeability coefficient (Papp) of Caco-2 cells for SIF by 11.8-fold. The results indicated that using PGWP to encapsulate SIF was an effective approach for delivering SIF, while enhancing its bioavailability and transcellular transport.

Electrospraying and electrospinning of tannic acid-loaded zein: Characterization and antioxidant effects in astrocyte culture exposed to E. coli lipopolysaccharide

Tannic acid (TA) exhibits low bioavailability in the gastrointestinal tract, limiting its benefits due to small amounts reaching the CNS. Thus, the objective of this study was to develop zein capsules and fibers by electrospraying/electrospinning for encapsulation of TA. Polymeric solutions were evaluated by electrical conductivity, density, and viscosity. In zein capsules, up to 2 % TA was added, and in fibers, up to 1 % TA was added. Zein capsule and fiber with TA were evaluated by morphology, size distribution, encapsulation efficiency, thermal and thermogravimetric properties, and functional groups. Zein capsule with 1.5 % TA was evaluated in astrocyte culture for cytotoxicity and antioxidant activity. TA zein capsules and fibers exhibited high encapsulation efficiency and homogeneous morphology. TA encapsulated in zein presented higher thermal stability than free TA. TA zein capsule did not present toxicity and elicited antioxidant action in lipopolysaccharide-induced astrocyte culture. Capsules and fibers were successfully produced by electrospraying/electrospinning techniques.

Multi-spectroscopies and molecular docking insights into the interaction mechanism and antioxidant activity of isoquercetin and zein nanoparticles

The purpose of this study was to compare and characterize the theoretical properties and interaction mechanisms of zein and isoquercetin (ISO) from experimental and theoretical perspectives. Zein nanoparticles with different ISO concentrations (ZINPs) were prepared by the antisolvent precipitation method. The experimental results indicated all particles appeared spherical. When the mass ratio of zein to ISO was 10:1, the encapsulation efficiency of ZINPs reached 88.19 % with an average diameter of 126.67 nm. The multispectral method and molecular docking results confirmed that hydrogen bonding and van der Waals force played a dominant role for the binding of ISO to zein, and the primary fluorescence quenching mechanism for zein by ISO was static quenching. Furthermore, ZINPs had greater solubility and antioxidant activity, as well as inhibited the release of ISO during simulated gastrointestinal digestion processes. This research contributes to the understanding of the non-covalent binding mechanism between zein and ISO, providing a theoretical basis for the construction of ISO active carriers.

Novel ligand decorated theranostic zein nanoparticles coloaded with paclitaxel and carbon quantum dots: formulation and optimization

Aim: The present research focused on development and optimization of ligand decorated theranostic nanocarrier encapsulating paclitaxel and carbon quantum dots (CQDs). Methods: CQDs were prepared by microwave-assisted pyrolysis and were characterized for particle size and fluorescence behavior. Ligand decorated zein nanoparticles, coloaded with paclitaxel and CQDs, were formulated using a one-step nanoprecipitation method and optimized for various process parameters. Results: Particle size for coated and uncoated nanoparticles was 90.16 ± 1.65 and 179.26 ± 3.61 nm, respectively, and entrapment efficiency was >80%. The circular dichroism spectroscopy showed zein retained its secondary structure and release study showed biphasic release behavior. Conclusion: The prepared theranostic nanocarrier showed optimal fluorescence and desired release behavior without altering the secondary structure of zein.

Antimicrobial and antioxidant activity of encapsulated tea polyphenols in chitosan/alginate-coated zein nanoparticles: a possible supplement against fish pathogens in aquaculture

Regulation of antibiotic use in aquaculture calls for the emergence of more sustainable alternative treatments. Tea polyphenols (GTE), particularly epigallocatechin gallate (EGCG), have various biological activities. However, tea polyphenols are susceptible to degradation. In this work, EGCG and GTE were encapsulated in zein nanoparticles (ZNP) stabilized with alginate (ALG) and chitosan (CS) to reduce the degradation effect. ALG-coated ZNP and ALG/CS-coated ZNP encapsulating EGCG or GTE were obtained with a hydrodynamic size of less than 300 nm, an absolute ζ-potential value >30 mV, and an encapsulation efficiency greater than 75%. The antioxidant capacity of the encapsulated substances, although lower than that of the free ones, maintained high levels. On the other hand, the evaluation of antimicrobial activity showed greater efficiency in terms of growth inhibition for ALG/CS-ZNP formulations, with average overall values of around 60%, reaching an inhibition of more than 90% for Photobacterium damselae. These results support encapsulation as a good strategy for tea polyphenols, as it allows maintaining significant levels of antioxidant activity and increasing the potential for antimicrobial activity, in addition to increasing protection against sources of degradation.

Near-infrared light-actuated on-demand botanicals release and hyperthermia by an antibiotic-free polysaccharide-based hydrogel dressing for the synergistic treatment of wound infections

Bacterial infection is a key factor affecting wound healing. Conventional treatments might lead to the widespread emergence of drug-resistant bacteria due to the long-term and excessive use of antibiotics. It is necessary to develop an antibiotic-free method for effective treatment of bacterial wound infections. In this work, we constructed an antibiotic-free polysaccharide-based hydrogel dressing (ATB) with near-infrared light-actuated on-demand botanicals release and hyperthermia for the synergistic treatment of wound infections. The ATB hydrogel dressing was made up of agarose as a support matrix, berberine hydrochloride as the active botanicals and TA-Fe(III) nanoparticles as NIR laser-activated photothermal reagents. The ATB hydrogel dressing showed spatiotemporal botanicals release and excellent photothermal properties with NIR irradiation. With the results of in vitro and in vivo antibacterial experiments, the antibiotic-free ATB hydrogel could synergistically eliminate bacteria and accelerate wound healing. Overall, the near-infrared light-responsive ATB hydrogel could provide a promising antibiotic-free strategy for the treatment of bacterial wound infections.

The role of polysaccharides in improving the functionality of zein coated nanocarriers: Implications for colloidal stability under environmental stresses

Zein has gained popularity over the past few years as an incredible food and bio-based materials. The potential functions and health benefits of zein microcapsules or micro-/nanoparticles in bioactive components delivery, structured emulsion, etc., have received great attention. However, the development has been limited by colloidal destabilization, especially when thermal processing is involved. There is a recent trend in developing zein-polysaccharide complexes (ZPCs), which has tremendously improved the performance of zein-based colloidal carrier systems or emulsions. Increasing our understanding of zein interactions and their contribution to the structure of various macromolecules can help us to develop novel biomaterials that can be used in food, agriculture, biomedicine, and cosmetics. In addition, these nanocarriers are suitable for the encapsulation and delivery of bioactive compounds which have positive perspective in food industry. Therefore, this article aimed to review recent advances in the ZPCs that can be applied to functional or health-promoting foods, with a focus on the characteristics of different ZPCs, factors and mechanisms affecting the stability (especially thermal stability) of these complexes, and their application in food industry as a carrier for BCs. Further, the stability of ZPCs based emulsions under processing and physiological environments, as well some typical effective methods are introduced. Also, the principal challenges and prospects were enumerated and discussed.

Physicochemical and antioxidant properties of tannic acid crosslinked cationic starch/chitosan based active films for ladyfinger packaging application

In the present study, cationic starch (CS)/chitosan (CH) incorporated with tannic acid (TA)(CSCT) eco-friendly films were prepared by employing an inexpensive solvent casting technique. Influence of TA on the physicochemical and antimicrobial properties of CS/CH polymer matrix were studied. The FTIR findings and homogeneous, dense SEM micrographs confirms the effective interaction of TA with CS/CH polymer matrix. CSCT-3 active film displayed tensile strength of 26.99±1.91 MPa, which is more substantial than commercially available polyethylene (PE) (12-16 MPa) films. The active films exhibited excellent barrier properties against moisture and water, supported by increased water contact angle values (86.97±0.29°). Overall migration rate of active films was found to be below the permitted limit of 10mg/dm2. The active films showed around 56% of degradation in soil within 15 days. Besides, the active films showed concurring impact against food borne pathogens like E. coli, S. aureus and C. albicans. The CSCT-3 active film presented 90.83% of antioxidant capacity, demonstrating the effective prevention of food oxidation related deterioration. Ladyfinger packaging was inspected to examine the ability of active films as packaging material resulted in effectively resisting deterioration and extending shelf life in comparison with traditional PE packaging.

Incidental nanoparticles in black tea alleviate DSS-induced ulcerative colitis in BALB/c mice

As the dominant herbal drink consumed worldwide, black tea exhibits various health promoting benefits including amelioration of inflammatory bowel diseases. Despite extensive studies on the tea's components, little is known about the bioactivities of nanoparticles (NPs) which were incidentally assembled in the tea infusion and represent the major components. This study investigated the alleviative effects of black tea infusion, the isolated black tea NPs, and a mixture of caffeine, epigallocatechin-3-gallate, gallic acid and epicatechin gallate on dextran sodium sulfate (DSS)-induced ulcerative colitis. The results showed that both the black tea infusion and the NPs significantly alleviated colitis, suppressed the mRNA levels of pro-inflammatory cytokines TNF-α, IL-6, and IL-1β, and suppressed the DSS-induced loss of cell-cell junction proteins (e.g., E-cadherin, ZO-1, and claudin-1) and increase of p-STAT3. The mixture of four tea components, which is the analogue of bioactive payloads carried by the NPs, was much less effective than the tea infusion and NPs. It shows that the NPs elevate the efficiency of polyphenols and caffeine in black tea in restoring the intercellular connection in the intestine, inhibiting mucosal inflammation, and alleviating ulcerative colitis. This work may inspire the development of tea-based therapeutics for treating inflammatory bowel diseases and have wide influences on value-added processing, quality evaluation, functionalization, and innovation of tea and other plant-based beverages.

Herbal Extracts Encapsulated Nanoliposomes as Potential Glucose-lowering Agents: An in Vitro and in Vivo Approach Using Three Herbal Extracts

Encapsulation of polyphenol-rich herbal extracts into nanoliposomes is a promising strategy for the development of novel therapeutic agents against type 2 diabetes mellitus. An attempt was made to encapsulate aqueous, ethanol, and aqueous ethanol (70% v/v) extracts of Senna auriculata (L.) Roxb., Murraya koenigii (L.) Spreng,. and Coccinia grandis (L.) Voigt into nanoliposomes and to screen acute bioactivities in vitro and in vivo. A wide spectrum of bioactivity was observed of which aqueous extracts encapsulated nanoliposomes of all three plants showed high bioactivity in terms of in vivo glucose-lowering activity in high-fat diet-fed streptozotocin induced Wistar rats, compared to respective free extracts. The particle size, polydispersity index, and zeta potential of the aforementioned nanoliposomes ranged from 179-494 nm, 0.362-0.483, and (-22) to (-17) mV, respectively. The atomic force microscopy (AFM) imaging reflected that the nanoparticles have desired morphological characteristics and Fourier-transform infrared (FTIR) spectroscopy analysis revealed successful encapsulation of plant extracts into nanoparticles. However, only the S. auriculata aqueous extract encapsulated nanoliposome, despite the slow release (9% by 30 hours), showed significant (p < 0.05) in vitro α-glucosidase inhibitory activity and in vivo glucose-lowering activity compared to free extract, proving worthy for future investigations.

Gum arabic as a sole wall material for constructing nanoparticle to enhance the stability and bioavailability of curcumin

In this study, a kind of nanoparticle prepared using gum arabic as a sole wall material for loading curcumin was obtained. The properties and digestive characteristics of the curcumin-loaded nanoparticle were determined. Results showed that the maximum loading amount of the nanoparticle was 0.51 µg/mg with an approximately 500 nm size. The Fourier transform infrared (FTIR) spectrum showed that the complexation was mainly related to the -C[bond, double bond]O, -CH, and -C-O-C- groups. The curcumin-loaded nanoparticle exhibited good stability under highly concentrated salinity stress, and the stability of the curcumin loaded in nanoparticles was significantly higher than that of free curcumin under ultraviolet radiation. The curcumin loaded in nanoparticle was released mainly in the intestinal digestion stage, and the release process was sensitive to the pH changes rather than protease. In conclusion, these nanoparticles can be a potential nanocarrier for enhancing the stability of curcumin which can be applied in the salt-containing food system.

Co-encapsulation of curcumin and quercetin with zein/HP-β-CD conjugates to enhance environmental resistance and antioxidant activity

In this study, composite nanoparticles consisting of zein and hydroxypropyl beta-cyclodextrin were prepared using a combined antisolvent co-precipitation/electrostatic interaction method. The effects of calcium ion concentration on the stability of the composite nanoparticles containing both curcumin and quercetin were investigated. Moreover, the stability and bioactivity of the quercetin and curcumin were characterized before and after encapsulation. Fluorescence spectroscopy, Fourier Transform infrared spectroscopy, and X-ray diffraction analyses indicated that electrostatic interactions, hydrogen bonding, and hydrophobic interactions were the main driving forces for the formation of the composite nanoparticles. The addition of calcium ions promoted crosslinking of the proteins and affected the stability of the protein-cyclodextrin composite particles through electrostatic screening and binding effects. The addition of calcium ions to the composite particles improved the encapsulation efficiency, antioxidant activity, and stability of the curcumin and quercetin. However, there was an optimum calcium ion concentration (2.0 mM) that provided the best encapsulation and protective effects on the nutraceuticals. The calcium crosslinked composite particles were shown to maintain good stability under different pH and simulated gastrointestinal digestion conditions. These results suggest that zein-cyclodextrin composite nanoparticles may be useful plant-based colloidal delivery systems for hydrophobic bio-active agents.

Food biopolymer behaviors in the digestive tract: implications for nutrient delivery

Biopolymers are prevalent in both natural and processed foods, serving as thickeners, emulsifiers, and stabilizers. Although specific biopolymers are known to affect digestion, the mechanisms behind their influence on the nutrient absorption and bioavailability in processed foods are not yet fully understood. The aim of this review is to elucidate the complex interplay between biopolymers and their behavior in vivo, and to provide insights into the possible physiological consequences of their consumption. The colloidization process of biopolymer in various phases of digestion was analyzed and its impact on nutrition absorption and gastrointestinal tract was summarized. Furthermore, the review discusses the methodologies used to assess colloidization and emphasizes the need for more realistic models to overcome challenges in practical applications. By controlling macronutrient bioavailability using biopolymers, it is possible to enhance health benefits, such as improving gut health, aiding in weight management, and regulating blood sugar levels. The physiological effect of extracted biopolymers utilized in modern food structuring technology cannot be predicted solely based on their inherent functionality. It is essential to account for factors such as their initial consuming state and interactions with other food components to better understand the potential health benefits of biopolymers.

Improving the bioaccessibility of lipophilic ingredient in its oral intestinal delivery by ultrasound and biological cross-linker

BACKGROUND

Great efforts have been made to improve the oral bioaccessibility of lipophilic ingredients with multi-functionalities. Achieving intestinal delivery of lipophilic ingredients and their encapsulation in micelles composed of bile salts and lipid hydrolysates (i.e. fatty acids) is critical for improving oral bioaccessibility. Therefore, oil-core microcapsules are considered ideal carriers of lipophilic ingredients. Previous studies have reported oil-core/zein-shell microcapsules constructed by a one-step anti-solvent process. Still, its efficacy as an intestinal delivery system was limited because if the porous shell structure.

RESULTS

Zein solution was pretreated with ultrasound and tannic acid (TA) cross-linking. Composite oil-core microcapsule (COM) with a compact shell structure was successfully prepared by using modified zein solution in the anti-solvent process. Fourier-transform infrared spectroscopy and circular dichroism analyses indicated that ultrasound and TA synergistically promote the conformational transition of zein from α-helix to β-sheet and enhance the hydrophobic interactions among protein chains. The above changes contribute to the strengthen of shell zein network. Correspondingly, COM presents superior encapsulation efficiency and environmental stability over the simple oil-core microcapsule (SOM) prepared without the use of ultrasound and TA. Furthermore, antioxidant activity of β-carotene was well retained during the encapsulation process. In vitro studies indicated that COM was more resistant to digestibility and acid-induced swelling. More than 87% of β-carotene could be released in the intestine in a sustainable way. The controllable release behavior thus promoted a significant increase in bioaccessibility of β-carotene encapsulated in COM compared to SOM (85.9% versus 48.5%).

CONCLUSION

The COM generated here shows potential for bioaccessibility improvement of lipophilic ingredients. © 2022 Society of Chemical Industry.

Physically and Chemically Crosslinked, Tannic Acid Embedded Linear PEI-Based Hydrogels and Cryogels with Natural Antibacterial and Antioxidant Properties

Linear polyethyleneimine (L-PEI) was obtained from the acidic hydrolysis of poly(2-ethyl-2-oxazoline) and employed in the synthesis of physically crosslinked L-PEI hydrogel, PC-L-PEIH, chemically crosslinked L-PEI hydrogel, CC-L-PEIH, and cryogels, CC-L-PEIC. The preparation of L-PEI-based hydrogel networks was carried out in two ways: 1) by cooling the L-PEI solution from 90 °C to room temperature, and 2) by crosslinking L-PEI chains with a crosslinker, glycerol diglycidyl ether = 20 °C for CC-L-PEIC. Furthermore, a polyphenolic compound, tannic acid (TA), with superior antibacterial, antioxidant, and anti-inflammatory properties as an active biomedical functional agent, was encapsulated during the synthesis process within L-PEI-based hydrogels and cryogels, at 10% and 25% (w/w) based on the L-PEI amount. A linear and higher TA release was observed from physically crosslinked PEI-based hydrogels containing 10% and 25% TA-containing PC-L-PEI/TAH within 6 h, with 9.5 ± 05 mg/g and 60.2 ± 3.8 mg/g cumulative released amounts, respectively. A higher antioxidant activity was observed for 25% TA containing PC-L-PEI/TAH with 53.6 ± 5.3 µg/mL total phenol content and 0.48 ± 0.01 µmole Trolox equivalent/g. The minimum bactericidal concentration (MBC) of PC-L-PEIH and CC-L-PEIC networks against both E. coli (ATCC 8739) and Gram-positive B. subtilis (ATCC 6633) bacteria was determined at 5 mg/mL, whereas the MBC value of 10 mg/mL for CC-L-PEIH networks against the same bacteria was achieved.

Curcumin encapsulated zein/caseinate-alginate nanoparticles: Release and antioxidant activity under in vitro simulated gastrointestinal digestion

Curcumin-loaded zein/sodium caseinate-alginate nanoparticles were successfully fabricated using a pH-shift method/electrostatic deposition method. These nanoparticles produced were spheroids with a mean diameter of 177 nm and a zeta-potential of -39.9 mV at pH 7.3. The curcumin was an amorphous, and the content in the nanoparticles was around 4.9% (w/w) and the encapsulation efficiency was around 83.1%. Aqueous dispersions of the curcumin-loaded nanoparticles were resistant to aggregation when subjected to pH changes (pH 7.3 to 2.0) and sodium chloride addition (1.6 M), which was mainly attributed to the strong steric and electrostatic repulsion provided by the outer alginate layer. An in vitro simulated digestion study showed that the curcumin was mainly released during the small intestine phase and that its bioaccessibility was relatively high (80.3%), which was around 5.7-fold higher than that of non-encapsulated curcumin mixed with curcumin-free nanoparticles. In the cell culture assay, the curcumin reduced reactive oxygen species (ROS), increased superoxide dismutase (SOD) and catalase (CAT) activity, and reduced malondialdehyde (MDA) accumulation in hydrogen peroxide-treated HepG2 cells. The results suggested that nanoparticles prepared by pH shift/electrostatic deposition method are effective at delivering curcumin and may be utilized as nutraceutical delivery systems in food and drug industry.

Molecular orientation rules the efficiency of immobilized antioxidants

Tannic acid (TA) and glutathione (GSH) are important molecular antioxidants against reactive oxygen species. Their efficiency is limited by low solubility and high sensitivity, which may be solved by confinement in composite materials. Here, effect of immobilization of these antioxidants on their radical scavenging activity was investigated using layered double hydroxide (LDH) nanoparticles as hosts. Different preparation methods were applied to build composite systems leading to variations in the molecular orientation of both TA and GSH on the surface or among the layers of LDHs. Systematic combination of spectroscopy (FT-IR, Raman, UV-VIS-NIR-DRS), diffraction (XRD) and microscopy (SEM) methods revealed perpendicular or parallel orientation of TA on the surface of LDH depending on the preparation approach applied. Immobilization of GSH protected the antioxidant molecules from degradation. Radical scavenging tests evidenced that the activity of the antioxidants strongly depends on the molecular orientation. The LDH supported GSH and TA proved as durable and reusable antioxidant agents to be applied as radical scavengers in medical therapies or in industrial processes.

Characterization of the interaction between boscalid and tannic acid and its effect on the antioxidant properties of tannic acid

The binding of pesticide residues and fruit components may have a profound impact on pesticide dissipation and the functional characteristics of the corresponding components. Therefore, the interaction between boscalid and tannic acid (TA, a representative phenolic in fruit) was systematically investigated using spectroscopic, thermodynamic, and computational chemistry methods. A separable system was designed to obtain the boscalid-TA complex. Fourier transform infrared and ¹ H-NMR spectroscopies indicated the formation of hydrogen bonds in the complex. Isothermal titration calorimetry showed that the complex bound spontaneously through hydrophobic interactions (ΔG < 0, ΔH > 0, ΔS > 0), with a binding constant of 6.0 × 10⁵  M^-1 at 298 K. The molecular docking results further confirmed the formation of hydrogen bonds and hydrophobic interactions in the complex at the molecular level, with a binding energy of -8.43 kcal mol^-1 . In addition, the binding of boscalid to TA significantly decreased the antioxidant activity of TA. The binding of boscalid residue to TA was characterized at the molecular level, which significantly reduced the in vitro antioxidant properties of TA. PRACTICAL APPLICATION: This study provides a reference for the molecular mechanisms of the interaction between pesticide residues and food matrices, as well as a basis for regulating bound-state pesticide residues in food.

Sustainable Biodegradable Biopolymer-Based Nanoparticles for Healthcare Applications

Biopolymeric nanoparticles are gaining importance as nanocarriers for various biomedical applications, enabling long-term and controlled release at the target site. Since they are promising delivery systems for various therapeutic agents and offer advantageous properties such as biodegradability, biocompatibility, non-toxicity, and stability compared to various toxic metal nanoparticles, we decided to provide an overview on this topic. Therefore, the review focuses on the use of biopolymeric nanoparticles of animal, plant, algal, fungal, and bacterial origin as a sustainable material for potential use as drug delivery systems. A particular focus is on the encapsulation of many different therapeutic agents categorized as bioactive compounds, drugs, antibiotics, and other antimicrobial agents, extracts, and essential oils into protein- and polysaccharide-based nanocarriers. These show promising benefits for human health, especially for successful antimicrobial and anticancer activity. The review article, divided into protein-based and polysaccharide-based biopolymeric nanoparticles and further according to the origin of the biopolymer, enables the reader to select the appropriate biopolymeric nanoparticles more easily for the incorporation of the desired component. The latest research results from the last five years in the field of the successful production of biopolymeric nanoparticles loaded with various therapeutic agents for healthcare applications are included in this review.

Silk-based hydrogel incorporated with metal-organic framework nanozymes for enhanced osteochondral regeneration

Osteochondral defects (OCD) cannot be efficiently repaired due to the unique physical architecture and the pathological microenvironment including enhanced oxidative stress and inflammation. Conventional strategies, such as the control of implant microstructure or the introduction of growth factors, have limited functions failing to manage these complex environments. Here we developed a multifunctional silk-based hydrogel incorporated with metal-organic framework nanozymes (CuTA@SF) to provide a suitable microenvironment for enhanced OCD regeneration. The incorporation of CuTA nanozymes endowed the SF hydrogel with a uniform microstructure and elevated hydrophilicity. In vitro cultivation of mesenchymal stem cells (MSCs) and chondrocytes showed that CuTA@SF hydrogel accelerated cell proliferation and enhanced cell viability, as well as had antioxidant and antibacterial properties. Under the inflammatory environment with the stimulation of IL-1β, CuTA@SF hydrogel still possessed the potential to promote MSC osteogenesis and deposition of cartilage-specific extracellular matrix (ECM). The proteomics analysis further confirmed that CuTA@SF hydrogel promoted cell proliferation and ECM synthesis. In the full-thickness OCD model of rabbit, CuTA@SF hydrogel displayed successfully in situ OCD regeneration, as evidenced by micro-CT, histology (HE, S/O, and toluidine blue staining) and immunohistochemistry (Col I and aggrecan immunostaining). Therefore, CuTA@SF hydrogel is a promising biomaterial targeted at the regeneration of OCD.