Improvement of fish protein film with nanoclay and transglutaminase for food packaging

Rigor Mortis in Farmed Common Carp Cyprinus carpio: The Effects of Handling Temperature

The study was conducted to determine the rigor mortis in common carp Cyprinus carpio, weighing 1100 ± 163 g and measuring 37.5 ± 1.87 cm in total length. Immediately after catching, the fish were killed by a blow to the head, followed by washing with tap water, before being placed in six insulated boxes, either at the ambient temperature (25 ± 3°C) or at a chilled temperature of (0°C). The rigor mortis and biochemical changes were monitored at regular times to measure the rigor mortis index (%), pH, and chemical composition. The rate of rigor mortis index in fish kept at ambient temperature was 100% within 10 h after fishing, while it was 100% after 20 h in fish kept at a chilled temperature. During the later postmortem changes, pH slightly increased to reach a value of 7.2 for fish kept at ambient temperature and 7 for fish kept at a chilled temperature. The results also showed nonsignificant differences (p > 0.05) in the chemical composition of fish before and after rigor mortis. Therefore, it was considered that the development of rigor mortis in common carp occurring more rapidly at ambient temperature than at chilled temperature.

Nanotechnology in the manufacturing of sustainable food packaging: a review

At present, there is an escalating concern among consumers regarding the spoilage and safety of food items. Furthermore, the packaging materials used within the packaging industry are typically unsustainable food packaging. To confront this significant challenge, nanotechnology may offer a feasible alternative to standard packaging practices. Several naturally derived polymers are capable of substituting petrochemical-based polymers. The application of biopolymers has demonstrated an ability to prolong the shelf life of food items. However, these materials frequently exhibit limited functionality. The incorporation of nanomaterials can significantly enhance the capabilities of these films. Furthermore, the fields of nanotechnology and food packaging are trending areas of research that hold promise for addressing various challenges within the packaging sector. Integrating nanomaterials into food packaging materials yields significant advantages relative to traditional packaging approaches. It contributes to enhanced food quality and safety, provides consumers with insights into their dietary practices, enables the repair of packaging tears, and increases the longevity of food storage. Incorporating various nanomaterials into biobased films has gained prominence in sustainable food packaging. This review explores the general overview of the historical perspective of nanotechnology. In addition, we addressed the various kinds of nanomaterials involved in food packaging. The functions of nanomaterials in food packaging applications are briefly reviewed. The compilation and discussion highlight the nanotechnology for safe, sustainable, and satisfiable food packaging. Finally, the toxicity, safety, and future trends of the nanomaterials in sustainable food packaging were briefly summarized. This review underscores the necessity of nanotechnology in sustainable food packaging.

Nanoparticle-Doped Antibacterial and Antifungal Coatings

Antimicrobial polymeric coatings rely not only on their surface functionalities but also on nanoparticles (NPs). Antimicrobial coatings gain their properties from the addition of NPs into a polymeric matrix. NPs that have been used include metal-based NPs, metal oxide NPs, carbon-based nanomaterials, and organic NPs. Copper NPs and silver NPs exhibit antibacterial and antifungal properties. So, when present in coatings, they will release metal ions with the combined effect of having bacteriostatic/bactericidal properties, preventing the growth of pathogens on surfaces covered by these nano-enhanced films. In addition, metal oxide NPs such as titanium dioxide NPs (TiO2 NPs) and zinc oxide NPs (ZnONPs) are used as NPs in antimicrobial polymeric coatings. Under UV irradiation, these NPs show photocatalytic properties that lead to the production of reactive oxygen species (ROS) when exposed to UV radiation. After various forms of nano-carbon materials were successfully developed over the past decade, they and their derivatives from graphite/nanotubes, and composite sheets have been receiving more attention because they share an extremely large surface area, excellent mechanical strength, etc. These NPs not only show the ability to cause oxidative stress but also have the ability to release antimicrobial chemicals under control, resulting in long-lasting antibacterial action. The effectiveness and life spans of the antifouling performance of a variety of polymeric materials have been improved by adding nano-sized particles to those coatings.

Effect of montmorillonite (MMT) on the properties of soybean meal protein isolate-based nanocomposite film loaded with debittered kinnow peel powder

The synthetic, non-renewable nature and harmful effects of plastic packaging have led to the synthesis of eco-friendly renewable bio-nanocomposite film. The present work was aimed at the formulation and characterization of bio-nanocomposite film using soybean meal protein, montmorillonite (MMT), and debittered kinnow peel powder. The composition of film includes protein isolate (5% w/v), glycerol (50% w/w), peel powder (20% w/w), and MMT (0.5-2.5% w/w). Incorporation of MMT in soybean meal protein-based film loaded with kinnow peel powder showed lesser solubility (16.76-26.32%), and swelling ability (142.77-184.21%) than the film prepared without MMT (29.41%, & 229.41%, respectively). The mechanical properties like tensile strength of nanocomposite film improved from 9.41 to 38.69% with the increasing concentration of MMT. The water vapor transmission rate of the nanocomposite film was decreased by 3.45-17.85% when the MMT concentration increased. Fourier-transform infrared spectroscopy and X-ray diffraction analysis showed no considerable change in the structural properties of the film after the addition of MMT. Differential scanning colorimeter analysis revealed the increment in melting temperature (85.33-92.67 °C) of the film with a higher concentration of MMT. Scanning electron microscopy analysis indicated an increased distributed area of MMT throughout the film at higher concentrations. The antimicrobial activity of the film was remarkably increased by 4.96-17.18% with the addition of MMT. The results obtained in the current work confirmed that MMT incorporation in soybean meal protein-based film can augment its properties and can be utilized for enhancing the storage period of food products.

Advances in transglutaminase cross-linked protein-based food packaging films; a review

Pushed by the environmental pollution and health hazards of plastic packaging, the development of biodegradable food packaging films (FPFs) is a necessary and sustainable trend for social development. Most protein molecules have excellent film-forming properties as natural polymer matrices, and the assembled films have excellent barrier properties, but show defects such as low water resistance and poor mechanical properties. In order to improve the performance of protein-based films, transglutaminase (TG) is used as a safe and green cross-linking (CL) agent. This work covers recent developments on TG cross-linked protein-based FPFs, mainly comprising proteins of animal and plant origin, including gelatin, whey protein, zein, soy proteins, bitter vetch protein, etc. The chemical properties and reaction mechanism of TG are briefly introduced, focusing on the effects of TG CL on the physicochemical properties of different protein-based FPFs, including barrier properties, water resistance, mechanical properties and thermal stability. It is concluded that the addition of TG can significantly improve the physical and mechanical properties of protein-based films, mainly improving their water resistance, barrier, mechanical and thermal properties. It is worth noting that the effect of TG on the properties of protein-based films is not only related to the concentration of TG added, but also related to CL temperature and other factors. Moreover, TG can also be used in combination with other strategies to improve the properties of protein-based films.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Development of edible films by incorporating nanocrystalline cellulose and anthocyanins into modified myofibrillar proteins

In this study, a myofibrillar protein (MP) system was used to investigate the film properties changes by adjusting the intensity of the interaction of proteins with other food components. The structure and rheological properties of several film-forming solutions were then determined. Furthermore, the structure of these composite films was examined using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The smooth and uniform surface acquired by scanning electron microscopy (SEM) substantiated the increased compatibility and continuity observed for films with greater food component interaction. In addition, the MP-based edible films with stronger food component interactions (the MP-Myr/ANT/NCC group) displayed superior mechanical (tensile strength: 6.68 MPa, elongation at break: 94.43%), water vapor barrier (10.01 × 10^-9 g m^-1 s^-1 Pa^-1), and ammonia sensitivity (total color difference: 17.00) capabilities compared to those of the other groups (the MP/ANT/NCC, MP-Lut/ANT/NCC, and MP-Que/ANT/NCC groups).

Durability of Biodegradable Polymer Nanocomposites

Biodegradable polymers (BP) are often regarded as the materials of the future, which address the rising environmental concerns. The advancement of biorefineries and sustainable technologies has yielded various BP with excellent properties comparable to commodity plastics. Water resistance, high dimensional stability, processability and excellent physicochemical properties limit the reviewed materials to biodegradable polyesters and modified compositions of starch and cellulose, both known for their abundance and relatively low price. The addition of different nanofillers and preparation of polymer nanocomposites can effectively improve BP with controlled functional properties and change the rate of degradation. The lack of data on the durability of biodegradable polymer nanocomposites (BPN) has been the motivation for the current review that summarizes recent literature data on environmental ageing of BPN and the role of nanofillers, their basic engineering properties and potential applications. Various durability tests discussed thermal ageing, photo-oxidative ageing, water absorption, hygrothermal ageing and creep testing. It was discussed that incorporating nanofillers into BP could attenuate the loss of mechanical properties and improve durability. Although, in the case of poor dispersion, the addition of the nanofillers can lead to even faster degradation, depending on the structural integrity and the state of interfacial adhesion. Selected models that describe the durability performance of BPN were considered in the review. These can be applied as a practical tool to design BPN with tailored property degradationand durability.

Novel Bio-Based Materials and Applications in Antimicrobial Food Packaging: Recent Advances and Future Trends

Food microbial contamination not only poses the problems of food insecurity and economic loss, but also contributes to food waste, which is another global environmental problem. Therefore, effective packaging is a compelling obstacle for shielding food items from outside contaminants and maintaining its quality. Traditionally, food is packaged with plastic that is rarely recyclable, negatively impacting the environment. Bio-based materials have attracted widespread attention for food packaging applications since they are biodegradable, renewable, and have a low carbon footprint. They provide a great opportunity to reduce the extensive use of fossil fuels and develop food packaging materials with good properties, addressing environmental problems and contributing significantly to sustainable development. Presently, the developments in food chemistry, technology, and biotechnology have allowed us to fine-tune new methodologies useful for addressing major safety and environmental concerns regarding packaging materials. This review presents a comprehensive overview of the development and potential for application of new bio-based materials from different sources in antimicrobial food packaging, including carbohydrate (polysaccharide)-based materials, protein-based materials, lipid-based materials, antibacterial agents, and bio-based composites, which can solve the issues of both environmental impact and prevent foodborne pathogens and spoilage microorganisms. In addition, future trends are discussed, as well as the antimicrobial compounds incorporated in packaging materials such as nanoparticles (NPs), nanofillers (NFs), and bio-nanocomposites.

Recent Applications of Biopolymers Derived from Fish Industry Waste in Food Packaging

Fish waste is attracting growing interest as a new raw material for biopolymer production in different application fields, mainly in food packaging, with significant economic and environmental advantages. This review paper summarizes the recent advances in the valorization of fish waste for the preparation of biopolymers for food packaging applications. The issues related to fishery industry waste and fish by-catch and the potential for re-using these by-products in a circular economy approach have been presented in detail. Then, all the biopolymer typologies derived from fish waste with potential applications in food packaging, such as muscle proteins, collagen, gelatin, chitin/chitosan, have been described. For each of them, the recent applications in food packaging, in the last five years, have been overviewed with an emphasis on smart packaging applications. Despite the huge industrial potential of fish industry by-products, most of the reviewed applications are still at lab-scale. Therefore, the technological challenges for a reliable exploitation and recovery of several potentially valuable molecules and the strategies to improve the barrier, mechanical and thermal performance of each kind of biopolymer have been analyzed.

Properties and characterization of thyme essential oil incorporated collagen hydrolysate films extracted from hide fleshing wastes for active packaging

In this investigation, collagen hydrolysate (CH) films extracted from hide fleshing wastes were successfully developed using solvent casting method by incorporating different concentrations of thyme essential oil (TO) (2%, 4%, 6%, and 8%) into the CH. Depending on the concentration of TO, thickness, tensile strength (TS), elongation at break (EAB), film solubility (FS), color, opacity, light transmittance, and thermal properties varied. Addition of TO resulted in the increases in the thickness, EAB (%), and light barrier performance of CH-TO films while there was a significant decrease in TS and FS of the CH films (p ≤ 0.05). According to our findings, the increment of TO content induced higher lightness and yellowness but lower redness values compared to CH film. Fourier-transform infrared spectroscopy was conducted to determine the molecular changes and interactions between CH extracted from hide fleshing wastes and TO. In order to analyze the thermal behavior of the films, differential scanning calorimetry analysis was conducted. Moreover, the structure-property relationships of CH and TO were examined by scanning electron microscopy and a reduction in the compact and homogenous structures of the films containing TO was observed. Promising results have been obtained showing that CH-based films can be used for active packaging purposes, thereby contributing to a significant reduction in the environmental impact of both leather solid waste and plastic packaging materials.

Microbial Transglutaminase as a Tool to Improve the Features of Hydrocolloid-Based Bioplastics

Several proteins from animal and plant origin act as microbial transglutaminase substrate, a crosslinking enzyme capable of introducing isopeptide bonds into proteins between the aminoacids glutamines and lysines. This feature has been widely exploited to modify the biological properties of many proteins, such as emulsifying, gelling, viscosity, and foaming. Besides, microbial transglutaminase has been used to prepare bioplastics that, because made of renewable molecules, are able to replace the high polluting plastics of petrochemical origin. In fact, most of the time, it has been shown that the microbial enzyme strengthens the matrix of protein-based bioplastics, thus, influencing the technological characteristics of the derived materials. In this review, an overview of the ability of many proteins to behave as good substrates of the enzyme and their ability to give rise to bioplastics with improved properties is presented. Different applications of this enzyme confirm its important role as an additive to recover high value-added protein containing by-products with a double aim (i) to produce environmentally friendly materials and (ii) to find alternative uses of wastes as renewable, cheap, and non-polluting sources. Both principles are in line with the bio-economy paradigm.

The Effect of Nanofillers on the Functional Properties of Biopolymer-based Films: A Review

Waste from non-degradable plastics is becoming an increasingly serious problem. Therefore, more and more research focuses on the development of materials with biodegradable properties. Bio-polymers are excellent raw materials for the production of such materials. Bio-based biopolymer films reinforced with nanostructures have become an interesting area of research. Nanocomposite films are a group of materials that mainly consist of bio-based natural (e.g., chitosan, starch) and synthetic (e.g., poly(lactic acid)) polymers and nanofillers (clay, organic, inorganic, or carbon nanostructures), with different properties. The interaction between environmentally friendly biopolymers and nanofillers leads to the improved functionality of nanocomposite materials. Depending on the properties of nanofillers, new or improved properties of nanocomposites can be obtained such as: barrier properties, improved mechanical strength, antimicrobial, and antioxidant properties or thermal stability. This review compiles information about biopolymers used as the matrix for the films with nanofillers as the active agents. Particular emphasis has been placed on the influence of nanofillers on functional properties of biopolymer films and their possible use within the food industry and food packaging systems. The possible applications of those nanocomposite films within other industries (medicine, drug and chemical industry, tissue engineering) is also briefly summarized.

Current insight and futuristic vistas of microbial transglutaminase in nutraceutical industry

Microbial transglutaminase (MTGase) has become a driving force in the food industry cross-linking the food proteins. MTGase-the nature's molecular glue is recognized to reorient food protein's functional properties without affecting its nutritive value. The scope and approach of this review is to have insight on the action mechanism of MTGase and impact of molecular linkage on functional proteins in various protein moieties in development of innovative features in food production for better consumer's choice and satisfaction. The study covers a wide range of published work across food industries involving innovative use of MTGase, an environment friendly production approach for commercial utilization to get better outcome in terms of culinary delight. The intrinsic biochemical properties and structural information by sequence analysis and clustering validates the mode of reaction mechanism of the biological glue enzyme. The review singles out how the MTGase emerged as a prime choice in ever evolving food industry.

Preparation and characterization of antibacterial, eco-friendly edible nanocomposite films containing Salvia macrosiphon and nanoclay

Nowadays, food security is a vital issue and antimicrobial packaging could play an important role in this matter. In this regard, Salvia macrosiphon seed mucilage (SSM) and nanoclay, as new sources for the production of food-grade edible films were investigated. These edible films were prepared by incorporation of SSM with glycerol and different percentage of nanoclay. Upon addition of nanoclay up to 2% physical, mechanical and thermal properties were considerably improved and the composite films showed the lowest water vapor permeability (WVP), as well as highest elongation at break and tensile strength. The nanocomposite edible films also showed antibacterial activity due to the SSM nature. Addition of nanoclay, increased the hydrophobicity, which makes the films great alternatives for food packaging. This study revealed that these novel antimicrobial edible films could be a promising packaging option for a wide range of food products.

Application of a Surimi-Based Coating to Improve the Quality Attributes of Shrimp during Refrigerated Storage

Shrimp is a popular seafood throughout the world. However, shrimp is highly perishable due to biochemical, microbiological, or physical changes during postmortem storage. In this study, the effect of a surimi-based coating with and without montmorillonite (MMT) nanoclay on shrimp quality was evaluated during eight days of refrigerator storage. Use of a surimi-based coating resulted in reductions of aerobic plate counts (APC) up to 2 log units. The combined effect of the MMT and coating was observed. Surimi-based coating with MMT resulted in lower APC (p < 0.05) toward the end of storage. The application of surimi-based coating with MMT to the shrimp samples improved sensory quality and delayed lipid oxidation and color deterioration during storage time. In general, better texture was observed when coating was applied either with or without MMT. This study suggests that surimi-based coating may improve the quality of shrimp during refrigerated storage.

Effect of anchovy by-product protein coating incorporated with thyme essential oil on the shelf life of anchovy (Engraulis encrasicolus L.) fillets

The effects of anchovy by-product protein coatings incorporated with thyme essential oil (TEO) on the shelf life of anchovy (Engraulis encrasicolus L.) fillets stored at 4 ± 1 °C were investigated. We grouped fillets in three categories: untreated fillets, fillets treated in coating solution alone, and fillets treated in coating solution containing 1.5% TEO and analyzed on 0, 3, 6, and 9 days of storage. It was observed that the total volatile basic nitrogen (TVB-N) and pH of all the fillet groups increased under cold storage conditions; however, this increase was much slow in both the coated anchovy fillets. Both coating applications slowed down the lipid oxidation but the coating containing TEO exhibited better effect than coating alone. The coating application alone or with essential oil had limited effect on microbial growth but positively affected the sensory quality. These results revealed that anchovy by-product protein coating mixed with TEO may prolong anchovy fillets' shelf life stored under cold condition.