Physical and oxidative stability of whey protein oil-in-water emulsions produced by conventional and ultra high-pressure homogenization: Effects of pressure and protein concentration on emulsion characteristics

Nanoemulsions base on the Rice bran albumin-sweet potato leaf polyphenol-dextran complexes: Interaction mechanisms, stability and Astaxanthin release behaviour

In this study, rice bran albumin (RBA), sweet potato leaf polyphenols (SPLPs) and dextran were conjugated through covalent or non-covalent interactions to improve the stability and bioaccessibility of astaxanthin (AST) in emulsion systems. It was shown that the RBA-SPLPs-Dex ternary covalent complex demonstrated higher polysaccharide grafting, looser secondary structure, and exposed hydrophobic groups indicating that they were favourable for emulsion stabilisation. In long-term storage tests, RBA-SPLPs emulsifier modified by 50 mg/mL dextran (Dextran50) showed smaller particle size and cream index, respectively. Besides, the retention of loaded astaxanthin was improved by 59.43 % compared to the unmodified model, along with a strengthened inhibition of lipid oxidation in the storage experiment. Besides, Dextran50 also improved the environmental stress stability of the emulsion and demonstrated more efficient AST release behaviour during intestinal digestion. In conclusion, these emulsion systems stabilised with ternary complexes have great potential for the delivery of lipid-soluble bioactive ingredients.

Research progress on marine polysaccharide-based Pickering emulsions and their potential applications in the food industry

Recently, natural biopolymers have increasingly been utilized to stabilize Pickering emulsions (PEs) for food applications. The research and development of marine polysaccharides is one of the hotspots in the field of PEs due to their low-cost, non-toxicity, abundant, and sustainability. This review aims to provide a comprehensive overview of the latest advancements in marine polysaccharide-based stabilized PEs systems. We begin with an introduction to the sources of marine polysaccharides and the methods for fabricating marine polysaccharide-based PEs. Following this, we summarize the role of natural marine polysaccharides and their complexes (combined with other polysaccharides, proteins, polyphenols, fatty acids, or other particles) as particles to form and stabilize PEs. Additionally, we detail the current applications of marine polysaccharide-based PEs in food packaging films/coatings, 3D printing, encapsulation and delivery of functional food ingredients, as well as in fat substitutes. Finally, potential future developments of PEs stabilized by marine polysaccharides in the food industry are also proposed. This review will provide valuable references to promote the application of marine polysaccharide-based PEs in the food sector.

Stabilizing emulsions by ultrasound-treated pea protein isolate - tannic acid complexes: Impact of ultrasonic power and concentration of complexes on emulsion characteristics

This work aimed to investigate the feasibility of stabilizing oil-in-water (O/W) emulsions by ultrasound-treated pea protein isolate-tannic acid (UPPI-TA) complex. The stability and microstructure of the O/W emulsions were evaluated at different ultrasonic powers (0-1000 W) and UPPI-TA complex concentrations (0.25-2.0 wt%). The contact angle (θ) of UPPI-TA was 59.6°, which was suitable for stabilizing O/W emulsions. At an ultrasonic power of 800 W, the droplet size and creaming index (CI) of emulsions decreased, and the apparent viscosity and interfacial protein adsorption content increased with increasing UPPI-TA concentration. In particular, emulsions with 1.5 % UPPI-TA showed the lowest CI, the highest interfacial protein adsorption content and viscoelasticity, as well as the best storage and thermal stability. These results showed that the suitable modifications of ultrasonic emulsification power and particle concentrations were a new potential approach to stabilize the O/W emulsions by ultrasound-treated pea protein isolated-tannic acid complex.

Droplet size dependency and spatial heterogeneity of lipid oxidation in whey protein isolate-stabilized emulsions

Spatiotemporal assessment of lipid and protein oxidation is key for understanding quality deterioration in emulsified food products containing polyunsaturated fatty acids. In this work, we first mechanistically validated the use of the lipid oxidation-sensitive fluorophore BODIPY 665/676 as a semi-quantitative marker for local peroxyl radical formation. Next, we assessed the impact of microfluidic and colloid mill emulsification (respectively producing mono- and polydisperse droplets) on local protein and lipid oxidation kinetics in whey protein isolate (WPI)-stabilized emulsions. We further used BODIPY 581/591 C11 and CAMPO-AFDye 647 as colocalisation markers for lipid and protein oxidation. The polydisperse emulsions showed an inverse relation between droplet size and lipid oxidation rate. Further, we observed less protein and lipid oxidation occurring in similar sized droplets in monodisperse emulsions. This observation was linked to more heterogeneous protein packing at the droplet surface during colloid mill emulsification, resulting in larger inter-droplet heterogeneity in both protein and lipid oxidation. Our findings indicate the critical roles of emulsification methods and droplet sizes in understanding and managing lipid oxidation.

Interfacial protein adsorption behavior can be connected across a wide range of timescales using the microfluidic EDGE (Edge-based droplet GEneration) tensiometer

HYPOTHESIS

Our hypothesis is that dynamic interfacial tension values as measured by the partitioned-Edge-based Droplet GEneration (EDGE) tensiometry can be connected to those obtained with classical techniques, such as the automated drop tensiometer (ADT), expanding the range of timescales towards very short ones.

EXPERIMENTS

Oil-water and air-water interfaces are studied, with whey protein isolate solutions (WPI, 2.5 - 10 wt%) as the continuous phase. The dispersed phase consists of pure hexadecane or air. The EDGE tensiometer and ADT are used to measure the interfacial (surface) tension at various timescales. A comparative assessment is carried out to identify differences between protein concentrations as well as between oil-water and air-water interfaces.

FINDINGS

The EDGE tensiometer can measure at timescales down to a few milliseconds and up to around 10 s, while the ADT provides dynamic interfacial tension values after at least one second from droplet injection and typically is used to also cover hours. The interfacial tension values measured with both techniques exhibit overlap, implying that the techniques provide consistent and complementary information. Unlike the ADT, the EDGE tensiometer distinguishes differences in protein adsorption dynamics at protein concentrations as high as 10 wt% (which is the highest concentration tested) at both oil-water and air-water interfaces.

Emulsification and stabilisation technologies used for the inclusion of lipophilic functional ingredients in food systems

Food industry is increasingly using functional ingredients to improve the food product quality. Lipid-containing functional ingredients are important sources of nutrients. This review examines the current state of emulsification and stabilisation technologies for incorporating lipophilic functional ingredients into food systems. Lipophilic functional ingredients, such as omega-3 fatty acids, carotenoids, and fat-soluble vitamins, offer numerous health benefits but present challenges due to their limited solubility in water-based food matrices. Emulsification techniques enable the dispersion of these ingredients in aqueous environments, facilitating their inclusion in a variety of food products. This review highlights recent advances in food emulsion formulation, emulsification methods and stabilisation techniques which, together, improve the stability and bioavailability of lipophilic compounds. The role of various emulsifiers, stabilizers, and encapsulation materials in enhancing the functionality of these ingredients is also explored. Furthermore, the review discusses different stabilisation techniques which can yield in emulsion in a solid or liquid state. By providing a comprehensive overview of current technologies, this review aims to guide future research and application in the development of functional foods enriched with lipophilic ingredients.

Effect of fat addition on the characteristics and interfacial behavior of chicken white soup emulsion from chicken skeleton

The effects of varying fat additions (0 %, 1.0 %, 1.5 %, 2.0 %, and 2.5 %) on characteristics and interfacial properties of chicken white soup emulsion from stewing chicken skeleton were investigated. The results revealed that the chicken white soup emulsion obtained with the 2.0 % fat addition had smaller D3,2 (1.889 μm), D4,3 (2.944 μm), and higher absolute zeta potential value (23.32 mV). Viscosity values were higher for the 2.0 % fat addition compared to the other treatment groups. Techniques like scanning electron microscopy, laser confocal, and atomic force microscopy demonstrated that oil droplets and particles in the soup were smaller and more evenly dispersed with the 2.0 % fat addition. Moreover, the 2.0 % fat group exhibited higher interfacial protein concentration of 207.56 mg/m2. Lastly, low field NMR images confirmed that the stability of the soup was enhanced with a 2.0 % fat addition. This research offers a foundational understanding for producing highly stable chicken white soup.

Physicochemical Quantitative Analysis of the Oil-Water Interface as Affected by the Mutual Interactions between Pea Protein Isolate and Mono- and Diglycerides

As a commercially available ingredient, the mono- and diglycerides (MDG) were widely used in a plant protein-based emulsion to provide effective, functional, emulsifying properties. The simultaneous addition of the MDG and pea protein isolate (PPI) was investigated by the methods of interfacial rheology and quantitative protein proteomics. The physicochemical quantitative analysis of the oil-water interface revealed an interfacial stability mechanism for the protein adsorption layer. For a low MDG concentration, the interfacial quantities of vicilin and albumin were increased, which could be attributed to the adsorption rate. For a high MDG concentration, both vicilin and albumin were displaced by MDG and desorbed from the interface, while legumin was more difficult to displace due to its slow adsorption and the complex structure of protein molecules. The protein molecules with the structural rearrangement interacted with MDG, exhibiting potential effects on the interfacial film structure. Combined with some nanotechnologies, the new comprehension of protein-emulsifier interactions may promote food delivery systems. The research aims to develop an in-depth analysis of interfacial proteins, and provide more innovative and tailored functionalities for the application of the plant protein emulsion.

Effect of Molecular Weight on the Structural and Emulsifying Characteristics of Bovine Bone Protein Hydrolysate

The emulsifying capacity of bovine bone protein extracted using high-pressure hot water (HBBP) has been determined to be good. Nevertheless, given that HBBP is a blend of peptides with a broad range of molecular weights, the distinction in emulsifying capacity between polypeptide components with high and low molecular weights is unclear. Therefore, in this study, HBBP was separated into three molecular weight components of 10-30 kDa (HBBP 1), 5-10 kDa (HBBP 2), and <5 kDa (HBBP 3) via ultrafiltration, and the differences in their structures and emulsifying properties were investigated. The polypeptide with the highest molecular weight displayed the lowest endogenous fluorescence intensity, the least solubility in an aqueous solution, and the highest surface hydrophobicity index. Analysis using laser confocal Raman spectroscopy showed that with an increase in polypeptide molecular weight, the α-helix and β-sheet contents in the secondary structure of the polypeptide molecule increased significantly. Particle size, rheological characteristics, and laser confocal microscopy were used to characterize the emulsion made from peptides of various molecular weights. High-molecular-weight peptides were able to provide a more robust spatial repulsion and thicker interfacial coating in the emulsion, which would make the emulsion more stable. The above results showed that the high-molecular-weight polypeptide in HBBP effectively improved the emulsion stability when forming an emulsion. This study increased the rate at which bovine bone was utilized and provided a theoretical foundation for the use of bovine bone protein as an emulsifier in the food sector.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Combination modes impact on the stability of β-carotene-loaded emulsion constructed by soy protein isolate, β-glucan and myricetin ternary complex

A β-carotene rich emulsion with improved physical and chemical stability was obtained in this study, using different types of protein-polysaccharide-polyphenol ternary complexes as novel emulsifiers. The ternary complexes were prepared by covalent or non-covalent binding of soy protein isolate (SPI), β-glucan (DG) and myricetin (MC), which were evidenced to be stable. It was indicated that the emulsion stabilized by covalent complex of SPI, DG and MC, exhibited higher zeta-potential and smaller particle size than those stabilized by non-covalent complex. Furthermore, the covalent complexes prepared from different addition sequences showed different efficiencies in stabilizing the emulsion, in which SPI-DG-MC and SPI-MC-DG-stabilized emulsions possess better stability, emulsifying activity and storage resistance under adverse environmental treatment, with CI values of 62.7% and 64.3% after 25 days, respectively. According to oxidative stability and rheology analysis of the emulsions, it was found that the SPI-MC-DG complex prepared at the ratio of 4:2:1 was more stable with relatively less lipid oxidation products and a tighter stacking structure, and the final LH value was 39.98 mmol/L and the MDA value was 6.34 mmol/L. These findings implied that the ternary complex has the potential to deliver fat-soluble active ingredient by means of emulsion, but which depends on the mode and sequence of the molecular interactions.

Impact of Combined Thermal Pressure Treatments on Physical Properties and Stability of Whey Protein Gel Emulsions

Emulsion gels are gaining interest as fat replacers due to their benefits associated with calorie reduction and their versatility in a wide range of products. Their production process needs to be tailored to obtain the desired stability and physicochemical properties. This study investigated the effect of heat (70, 80, and 90 °C) and pressure (5, 10, and 15 MPa) to produce whey protein emulsion gels using a pilot-scale tubular heat exchanger equipped with a homogenization valve. Both temperature and pressure determined a significant effect (p < 0.05) on the rheological moduli, with the treated samples displaying a predominant elastic behavior. The treatments also showed an improved pseudoplasticity due to the significant reduction in the flow behavior index (p < 0.05). All the samples showed a bimodal particle size distribution; by increasing the temperature up to 80 °C, a reduction in Dv50 (50th percentile) values compared to the control samples was observed. At 90 °C, the Dv50 value increased because of coalescence and flocculation phenomena occurring during or immediately after processing. The greater aggregation and structural development obtained with stronger process conditions improved the stability of the emulsions. The results show the capability to produce gel emulsions with good physical properties that could be proposed as food ingredients to substitute fats in food products.

Food grade nanoemulsions: promising delivery systems for functional ingredients

Nano-emulsions are receiving great attention in various industries, especially in the food sector. Peculiar properties of nano-sized droplets and high surface area are most suited for the development and delivery of functional ingredients. Nano-emulsions systems are suitable for encapsulation, protection, improving bioavailability, and target release of sensitive functional compounds. Nano-emulsions have promising potential for the delivery of nutraceuticals, probiotics, flavors, and colors. Nano-emulsions with active ingredients (antimicrobials) have a key part in ensuring food safety, nutrition, and quality of food. Nanoemulsions can also be used for biodegradable coating, packaging, antimicrobial coating, and quality and shelf life enhancement of different foods. The current review includes an overview of nanotechnology nano-emulsions, materials, techniques for formulation & production of nano-emulsions for food and nutrition. Furthermore, the analytical approaches used for the characterization of nano-emulsions and finally, the applications and limitations of nano-emulsions in the food industry are discussed in detail.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05387-3.

Effect of Ultra-High Pressure Homogenization (UHPH) and Conventional Thermal Pasteurization on the Volatile Composition of Tiger Nut Beverage

Tiger nut beverages are non-alcoholic products that are characterized by their pale color and soft flavor. Conventional heat treatments are widely used in the food industry, although heated products are often damaging to their overall quality. Ultra-high pressure homogenization UHPH) is an emerging technology that extends the shelf-life of foods while maintaining most of their fresh characteristics. The present work deals with the comparison of the effect of conventional thermal homogenization-pasteurization (H-P, 18 + 4 MPa at 65 °C, 80 °C for 15 s.) and UHPH (at 200 and 300 MPa, and inlet temperature of 40 °C), on the volatile composition of tiger nut beverage. Headspace-solid phase microextraction (HS-SPME) was used for detecting volatile compounds of beverages, which were then identified by gas chromatography-mass spectrometry (GC-MS). A total of 37 different volatile substances were identified in tiger nut beverages, which were primarily grouped into the aromatic hydrocarbons, alcohols, aldehydes and terpenes chemical families. Stabilizing treatments increased the total amount of volatile compounds (H-P > UHPH > R-P). H-P was the treatment that produced the most changes in the volatile composition of RP, while treatment at 200 MPa had a minor impact. At the end of their storage, these products were also characterized by the same chemical families. This study evidenced the UHPH technology as an alternative processing of tiger nut beverages production that minimally modifies their volatile composition.

Effect of sodium trimetaphosphate on the physicochemical properties of modified soy protein isolates and its lutein-loaded emulsion

Due to people's pursuit of healthy and green life, soy protein isolate (SPI) is occupying a larger and larger market share. However, the low solubility of SPI affects its development in the field of food and medicine. This paper aimed to investigate the effects of sodium trimetaphosphate (STMP) on the functional properties and structures of phosphorylated SPI and its lutein-loaded emulsion. After modification by STMP, the phosphorus content of phosphorylated SPI reached 1.2-3.61 mg/g. Infrared spectrum and X-ray photoelectron spectrum analysis confirmed that PO₄ ^3- had phosphorylation with -OH in serine of SPI molecule. X-ray diffraction analysis showed that phosphorylation destroyed the crystal structure of protein molecules. Zeta potential value of phosphorylated SPI decreased significantly. When STMP addition was 100 g/kg, particle size of protein solution decreased to 203 nm, and solubility increased to 73.5%. Furthermore, emulsifying activity and emulsifying stability increased by 0.51 times and 8 times, respectively. At the same protein concentration (1%-3% [w/w]), lutein-loaded emulsion prepared by phosphorylated SPI had higher absolute potential and smaller particle size. The phosphorylated protein emulsion at 2% concentration had the best emulsion stability after storage for 17 days. PRACTICAL APPLICATION: Phosphorylation significantly improved the emulsifying properties and solubility of SPI. Phosphorylated SPI significantly improved the stability of lutein-loaded emulsion. It provides theoretical basis for the application of phosphorylated SPI as emulsifier in delivery system and broadens the development of lutein in food and medicine field.

Application of Optical and Rheological Techniques in Quality and Storage Assessment of the Newly Developed Colloidal-Suspension Products: Yogurt-Type Bean-Based Beverages

The objectives of this study were to compare the properties of the yogurt-type bean-based beverages B and BG produced from the nongerminated and germinated beans, respectively, by high-pressure homogenization (HPH) and fermentation with three starter cultures. Optical techniques were used to evaluate the particle size distribution (PSD), color parameters, and instability during storage, while rheological tests were used to evaluate the shear viscosity, flow behavior, and viscoelastic properties. The BG compared to B, irrespective of the starter culture used, showed a higher mean diameter and Span of PSD (d_4,3 ≈ 76.8-84.2, Span ≈ 2.24-2.35 for BG vs. d_4,3 ≈ 38.2-47.0, Span ≈ 1.90-2.00 for B). The BG vs. B showed lower viscosity (0.47 Pa·s for BG vs. 0.81 Pa·s for B at shear rate 75 s^-1) and slightly lower but satisfactory stability (after 21 days at 6 °C, the Turbiscan Stability Index TSI ≈ 1.3-2.0 for BG vs. TSI ≈ 0.6-0.9 for B). Both B and BG were characterized by light-yellow color and showed the characteristics of a viscoelastic fluid. The HPH and germination mainly affected the properties of the tested plant tissue, which has a direct impact on the properties of the final products.

Preparation of Oxidized Starch/β-Lactoglobulin Complex Particles Using Microfluidic Chip for the Stabilization of Astaxanthin Emulsion

Here, we designed an oxidized starch/β-lactoglobulin (OS/β-lg) complex colloidal particle using a dual-channel microfluidic chip for the stabilization of astaxanthin emulsion. The effect of the mixing ratio, pH, and the degree of substitution (DS) of the oxidized starch on the formation of OS/β-lg complex particles was investigated in detail. The optimal complexation occurred at a pH of 3.6, a mixing ratio of 2:10, and a DS of 0.72%, giving an ideal colloidal particle with near-neutral wettability. With this optimum agent, the astaxanthin-loaded oil-in-water emulsions were successfully prepared. The obtained emulsions showed the typical non-Newton fluid behavior, and the rheological data met the Herschel-Bulkley model. The microscopic images confirmed the dense adsorption of the particle on the oil/water interface. In vitro release and stability studies demonstrated this compact layer contributed to the controlled-release and excellent stability of astaxanthin emulsions facing heat, ultraviolet, and oxidative intervention. This work suggests the potential of microfluidics for the production of food-grade solid emulsifiers.

Effects of ethanol pre-treated whey protein isolates on the physical stability and protein-lipid co-oxidation in oil-in-water emulsions

The changes of physical stability and protein-lipid co-oxidation of oil-in-water (O/W) emulsions which stabilized by whey protein isolates (WPI) and ethanol pre-treated WPI (EWPI) under different homogenization methods were investigated. Compared with WPI, EWPI could obviously enhance the O/W emulsion's stability due to smaller particle size and higher level of adsorbed proteins. Moreover, protein-lipid co-oxidation was observed in both WPI and EWPI stabilized O/W emulsions and controlled by the characteristics of the adsorbed proteins. EWPI protect themselves from attacked of lipid oxidation products more effectively than WPI, showing lower N'-formyl-l-kynurenine or carbonyl contents and degree of aggregation, as well as higher fluorescence intensity. Furthermore, high-pressure homogenization induced higher levels of adsorbed proteins in O/W emulsions than ultrasound homogenization, resulting in a higher degree of protein oxidation and lower degree of lipid oxidation. Therefore, EWPI can be applied as an efficient emulsifier in emulsion foods with higher physical and oxidative stabilities.

The effect of microfluidization pressure on the physical stability of vitamin A in oil-in-water emulsions

In this study, vitamin A was encapsulated within oil-in-water emulsions by high-pressure microfluidization prepared using phosphate buffer (90%), corn oil (10%), and whey protein isolate (2%) as an emulsifier. The influence of microfluidization pressure (10, 50, 100, 200 MPa) on the particle size, zeta potential, and the physical and chemical stability of emulsions was evaluated. The physical stability of emulsion was determined by multiple light scattering technique. The content of vitamin A was measured by HPLC–DAD during an accelerated storage test at 40 °C during 4 weeks. The color of the samples was monitored using a colorimeter. The results showed that the lowest particle size distribution and the highest absolute value of zeta potential on the droplets’ surface charge were obtained by applying a pressure of 100 MPa. Nanoemulsions prepared at 100 MPa also showed the highest colloidal stability. However, higher microfluidization pressure (up to 200 MPa) had a negative impact on the prepared emulsion’s stability. The results of chemical stability by HPLC measurements during storage time were in agreement with the results of physical stability and color change.

Impact of different ionic strengths on protein-lipid co-oxidation in whey protein isolate-stabilized oil-in-water emulsions

Protein-lipid co-oxidation of whey protein isolate (WPI)-stabilized oil-in-water (O/W) emulsions with different ionic strengths (0, 100, 200, 300 and 400 mM) during storage were investigated. The results proved that changes in levels of adsorbed proteins induced by different ionic strengths could obviously affect the occurrence of protein-lipid co-oxidation. The level of oxidative stress was higher in adsorbed proteins extracted from control sample than in those extracted from emulsions with 300 or 400 mM ionic strengths. This was indicated by higher levels of N'-formyl-l-kynurenine (NFK) and carbonyl, lower fluorescence intensity and more serious unfolding of protein structure. Moreover, control sample showed the highest oxidative stability, which was indicated by lower levels of primary and secondary lipid oxidation products. These findings clearly illustrated that altered levels of adsorbed proteins induced by different ionic strengths play a crucial role in affecting protein-lipid co-oxidation in O/W emulsions.

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.

Correlation between Physico-Chemical Characteristics of Particulated β-Lactoglobulin and Its Behavior at Air/Water and Oil/Water Interfaces

It is widely accepted that protein-based particles can efficiently stabilize foams and emulsions. However, it is not fully elucidated which particle properties are decisive for the stabilization of air/water and oil/water interfaces. To unravel this correlation, selected properties of nano-sized soluble β-lactoglobulin particles were changed one at a time. Therefore, particles of (1) variable size but similar zeta potential and degree of cross-linking and (2) similar size but different further properties were produced by heat treatment under a specific combination of pH value and NaCl concentration and then analyzed for their interfacial behavior as well as foaming and emulsifying properties. On the one hand, it was found that the initial phase of protein adsorption at both the air/water and the oil/water interface was mainly influenced by the zeta potential, independent of the particle size. On the other hand, foam stability as resolved from the time-dependent evolution of mean bubble area negatively correlated with disulfide cross-linking, whereas emulsion stability in terms of oil droplet flocculation showed a positive correlation with disulfide cross-linking. In addition, flocculation was more pronounced for larger particles. Concluding from this, foam and emulsion stability are not linked to the same particle properties and, thus, explanatory approaches cannot be used interchangeably.

Breakup and Coalescence of Oil Droplets in Protein-Stabilized Emulsions During the Atomization and the Drying Step of a Spray Drying Process

The goal of this study was to investigate the changes in oil droplet size in whey protein–stabilized emulsions during the atomization and the subsequent drying step of a spray drying process. For this purpose, experiments were performed in an atomization rig and a pilot spray dryer with two commercial pressure swirl atomizers. By comparing the oil droplet size before atomization, after atomization, and after spray drying, the changes in oil droplet size during each process step were quantified. The effect of oil droplet breakup during atomization was isolated by atomizing emulsions with 1 wt.% oil content and a protein to oil concentration ratio of 0.1. At 100 bar, the Sauter mean diameter of oil droplet size was reduced from 3.13 to 0.61 μm. Directly after breakup, coalescence of the oil droplets was observed for emulsions with a high oil content of 30 wt.%, leading to a droplet size after atomization of 1.15 μm. Increasing the protein to oil concentration ratio to 0.2 reduced coalescence during atomization and oil droplets with a mean diameter of 0.92 μm were obtained. Further coalescence was observed during the drying step: for an oil content of 30 wt.% and a protein to oil concentration ratio of 0.1 the mean droplet size increased to 1.77 μm. Powders produced at high oil contents showed a strong tendency to clump. Comparable effects were observed for a spray drying process with a different nozzle at 250 bar. The results confirm that droplet breakup and coalescence during atomization and coalescence during drying have to be taken into consideration when targeting specific oil droplet sizes in the product. This is relevant for product design in spray drying applications, in which the oil droplet size in the powder or after its redispersion determines product quality and stability.

The Effect of Microfluidization Pressure and Tocopherol Content on the Retention of Vitamin A in Oil-In-Water Emulsions

This work investigates the oxidative stability of vitamin A encapsulated in oil-in-water emulsions, which were prepared by using a microfluidizer. All emulsions were prepared with a fixed content of vitamin A (525 µM), corn oil (10%), water (90%), and whey protein (2%), but varying two main factors: the microfluidizer pressure (10, 50, 100, 200 MPa) and the amount of α-tocopherol (0, 0.25, 0.50, 1.00 mg/g). The content of vitamin A before and after the microfluidization process, and during the subsequent five weeks of storage at 40 °C were determined by HPLC-DAD. The results of the analysis of variance performed either on the data obtained before and after the microfluidization process or during the storage showed that the highest stability of vitamin A was obtained with the highest content of α-tocopherol and with an applied pressure between 100 and 200 MPa. The highest stability was explained by the smaller particle size of the resulting oil droplets. However, high pressures (200 MPa) showed a negative effect on vitamin A retention. These results could be useful for future formulations of retinoids.

Evaluation of Changes in Protein Quality of High-Pressure Treated Aqueous Aquafaba

Chickpea cooking water (CCW), known as aquafaba, has potential as a replacement for egg whites due to its emulsion and foaming properties which come from the proteins and starch that leach out from chickpeas into the cooking water. High pressure (HP) processing has the ability to modify the functional characteristics of proteins. It is hypothesized that HP processing could favorably affect the functional properties of CCW proteins by influencing their structure. The objective of this study to evaluate the effect of HP treatment on the associated secondary structure, emulsion properties and thermal characteristics of CCW proteins. A central composite rotatable design is used with pressure level (227-573 MPa) and treatment time (6-24 min) as HP variables, and concentration of freeze dried CCW aquafaba powder (11-29%) as product variable, and compared to untreated CCW powder. HP improves aquafaba emulsion properties compared to control sample. HP reduces protein aggregates by 33.3%, while β-sheets decreases by 4.2-87.6% in which both correlated to increasing protein digestibility. α-helices drops by 50%. It affects the intensity of some HP treated samples, but not the trend of bands in most of them. HP treatment decreases Td and enthalpy because of increasing the degree of denaturation.

Soy glycinin-soyasaponin mixtures at oil-water interface: Interfacial behavior and O/W emulsion stability

Soy glycinin (11S) was mixed with soyasaponin (Ssa) to elucidate the mechanism(s) involved in the stabilization of emulsions by mixed systems based on dynamic interfacial tension and dilatational rheology at the oil-water interface. The short/long-term properties of oil-in-water emulsions stabilized by 11S-Ssa mixtures included droplet-size distribution, droplet ζ-potential, microstructure, and Turbiscan stability index. The combination of Ssa (0.05%) with 11S significantly affected the interfacial dilatational and emulsion properties although the interfacial properties were still dominated by the protein. Higher concentrations (0.1% and 0.2%) of Ssa combined with 11S synergistically decreased the interfacial tension, which was attributed to the interaction between 11S and Ssa. Using high Ssa concentrations (0.25%-0.5%) enhanced the long-term stability of emulsions (in response to external deformations) after 42 d. These results will aid the basic understanding of protein-Ssa interfacial adsorption during emulsion formation and can help prepare natural food additives for designing emulsions.

Design of new lipids from bovine milk fat for baby nutrition

The lipid phase of infant formulas is generally composed of plant-based lipids structured with a high concentration of palmitic acid (C16:0) esterified at the sn-2 position of triacylglycerol since this structure favors the absorption and metabolism of fatty acids. Palm oil is commonly used to make up the lipid phase of infant formulas due to its high concentration of palmitic acid and solids profile and melting point similar to human milk fat. However, the addition of palm oil to infant formulas has been associated with the presence of 3-monochloropropane-1,2-diol (3-MCPD) esters, a group of glycerol-derived chemical contaminants (1,2,3-propanotriol), potentially toxic, formed during the refining process of vegetable oil. Bovine milk fat obtained from the complex biosynthesis in the mammary gland has potential as a technological alternative to replace palm oil and its fractions for the production of structured lipids to be used in infant formulas. Its application as a substitute is due to its composition and structure, which resembles breast milk fat, and essentially to the preferential distribution pattern of palmitic acids (C16:0) with approximately 85% distributed at the sn-1 and sn-2 position of triacylglycerol. This review will address the relationship between the chemical composition and structure of lipids in infant nutrition, as well as the potential of bovine milk fat as a basis for the production of structured lipids in substitution for the lipid phase of vegetable origin currently used in infant formulas.

Effect of ultrasonication on the stability and storage of a soy protein isolate-phosphatidylcholine nanoemulsions

Phosphatidylcholine-soybean protein isolate (PC-SPI) nanoemulsions were prepared by ultrasonication. The effects of preparation conditions (SPI and PC addition, ultrasonic power and time) on the structural properties of the nanoemulsions and their storage stability were investigated. The results showed that the most optimal adsorption capacity and adsorption tightness at the oil-water interface under optimal conditions (1.5% SPI, 0.20% PC, 500 W ultrasonic power and 9 min ultrasonic time) were exhibited by the SPI-PC conjugate, which demonstrated that this nanoemulsions can be categorized as a high-quality emulsion suitable for research. To test its stability, and the high-quality nanoemulsion of β-carotene was stored. After degradation of the nanoemulsions during storage, β-carotene was released. The β-carotene retention rate of the high-quality emulsion was maintained above 86% at different temperatures in the absence of light for up to 30 days. This study provides new information for the development of transport and stability systems for nanoemulsions.

Preparation and characterization of a novel controlled-release nano-delivery system loaded with pyraclostrobin via high-pressure homogenization

BACKGROUND

The development of efficient and safe green pesticides is a scientific strategy to alleviate current pesticide residues, environmental pollution, and threats to non-target organisms. Pesticide controlled-release formulations (CRFs) have attracted wide attention because they can control the rate of release of active ingredients and prolong the effective duration. In particular, nanoscale pesticide sustained-release systems have excellent biological activity and distribution performance because of their small particle size. Some technical difficulties remain in obtaining nanoscale CRFs.

RESULTS

We successfully fabricated pyraclostrobin nanosphere CRF by combining high-pressure homogenization technology and emulsion-solvent evaporation methods. The pyraclostrobin nanospheres had a uniform spherical shape with a mean particle size of 450 nm and polydispersity index of less than 0.3. The pyraclostrobin loading capacity reached 53.6%, with excellent storage stability. The contact angle of nanospheres on cucumber leaf surfaces demonstrated that it had good wettability. Compared with pyraclostrobin technical and commercial formulations, the nanosphere systems showed a significantly sustained release of pyraclostrobin for longer (up to 250 h). A preliminary bioassay against Penicillium ochrochloron showed that the bioactivity and long-term efficiency of pyraclostrobin nanospheres were superior to those of the commercial formulation.

CONCLUSION

This research introduced a simple, fast, expandable method for preparing pyraclostrobin nanospheres. The results showed that pyraclostrobin nanospheres could prolong the duration of pesticide efficacy and enhance bioactivity. Furthermore, this technology provides a platform for scale-up production of nano-scale pesticide CRFs. © 2020 Society of Chemical Industry.