Synthesis of sulfonated chitosan and its antibiofilm formation activity against E. coli and S. aureus

Recent Advances in Functional Biopolymer Films with Antimicrobial and Antioxidant Properties for Enhanced Food Packaging

Food packaging plays a crucial role in preserving freshness and prolonging shelf life worldwide. However, traditional packaging primarily acts as a passive barrier, providing limited protection against spoilage. Packaged food often deteriorates due to oxidation and microbial growth, reducing its quality over time. Moreover, the majority of commercial packaging relies on petroleum-derived polymers, which add to environmental pollution since they are not biodegradable. Growing concerns over sustainability have driven research into eco-friendly alternatives, particularly natural-based active packaging solutions. Among the various biopolymers, cellulose is the most abundant natural polysaccharide and has gained attention for its biodegradability, non-toxicity, and compatibility with biological systems. These qualities make it a strong candidate for developing sustainable packaging materials. However, pure cellulose films have limitations, as they lack antimicrobial and antioxidant properties, reducing their ability to actively preserve food. To tackle this issue, researchers have created cellulose-based active packaging films by integrating bioactive agents with antimicrobial and antioxidant properties. Recent innovations emphasize improving these films through the incorporation of natural extracts, polyphenols, nanoparticles, and microparticles. These enhancements strengthen their protective functions, leading to more effective food preservation. The films are generally classified into two types: (i) blend films, where soluble antimicrobial and antioxidant substances like plant extracts and polyphenols are incorporated into the cellulose solution, and (ii) composite films, which embed nano- or micro-sized bioactive fillers within the cellulose structure. The addition of these functional components enhances the antimicrobial and antioxidant efficiency of the films while also affecting properties like water resistance, vapor permeability, and mechanical strength. The continuous progress in cellulose-based active packaging highlights its potential as a viable alternative to conventional materials. These innovative films not only extend food shelf life but also contribute to environmental sustainability by reducing reliance on synthetic polymers. This review deals with the development of functional biopolymer films with antimicrobial and antioxidant properties towards sustainable food packaging.

Optimized One-Pot reaction and characterization of a cyanoethoxyethylated chitosan

Chitosan offers a wide range of applications due to its reactive amino groups, which enable various modifications. This study presents the synthesis of a chitosan derivative (ChECEA) using ethyl 2-cyano-3-ethoxyacrylate (ECEA). The reaction was conducted under various conditions to optimize the mass gain of the ChECEA. Stoichiometry (1.5 and 2.0M), temperature (60 to 95 °C), and reaction time (1 to 3.5 h) were varied. The ChECEA was characterized using a variety of techniques, including Fourier Transform Infrared Spectroscopy (FTIR), Nuclear Magnetic Resonance (NMR), Thermogravimetry (TG), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Zeta Potential, Contact Angle (CA), and Elemental Analysis (EA). FTIR confirmed the successful modification, evidenced by a sharp peak at 2220 cm-1 corresponding to the CN bond stretching. NMR analysis revealed new chemical shifts (166, 158, 115, and 11 ppm), and in combination with EA, was used to estimate the degree of substitution (DS) as 0.640 and 0.725, respectively. TG indicated a decrease in thermal stability and Zeta Potential suggested reduced suspension stability. Conversely, contact angle measurements showed increased hydrophobicity and decreased surface energy. Finally, XRD analysis revealed a decrease in the crystallinity index (from 79 % to 55 %), likely due to the incorporation of cyanoethoxyacrylate groups.

Chitosan-Based Multifunctional Biomaterials as Active Agents or Delivery Systems for Antibacterial Therapy

Antibiotic therapy has been a common method for treating bacterial infections over the past century, but with the rise in bacterial resistance caused by antibiotic abuse, better control and more rational use of antibiotics have been increasingly demanded. At the same time, a journey to explore alternatives to antibiotic therapies has also been undertaken. Chitosan and its derivatives, materials with good biocompatibility, biodegradability, and excellent antibacterial properties, have garnered significant attention, and more and more studies on chitosan and its derivatives have been conducted in recent years. In this work, we aim to elucidate the biological properties of chitosan and its derivatives and to track their clinical applications, as well as to propose issues that need to be addressed and possible solutions to further their future development and application.

Novel ionic chitosan derivatives based on pyridinium sulfonate: Synthesis, characterization, and studies on antimicrobial, antioxidant, and biocompatibility properties

To improve the solubility, antimicrobial efficacy, antioxidant capacity, and biocompatibility of chitosan for broader applications, a series of novel ionic chitosan derivatives were synthesized in this study by amidating chitosan with carboxyl pyridinium sulfonate. These derivatives were characterized through various analytical techniques, including FTIR, 1H NMR, UV, TGA, and XRD. Proton NMR was particularly utilized to determine the degree of substitution. The modified chitosans showed improved water solubility. Their antimicrobial activity against gram negative E. coli and gram positive S. aureus was evaluated in vitro through inhibition rates, minimum inhibitory concentrations (MIC), and minimum bactericidal concentrations (MBC), demonstrating high effectiveness at low concentrations. Additionally, antioxidant tests indicated that these derivatives possess significantly greater antioxidant activities compared to original chitosan, particularly the 5OHNASCS derivative which showed exceptional radical scavenging and reducing capabilities. Furthermore, the CCK-8 assay was employed to assess cytotoxicity in 293 T cells (human embryonic kidney cells), with all samples exhibiting no toxicity. Hemolysis tests were also conducted, revealing that the newly synthesized series of ionic chitosan derivatives showed no hemolytic activity, indicating good biocompatibility and potential for application as wound dressings. In summary, these newly developed ionic chitosan derivatives demonstrated excellent water solubility, antimicrobial activity, antioxidant capacity, and biocompatibility, suggesting their potential use in food and biomedical materials.

Synthesis of N-isonicotinic sulfonate chitosan and its antibiofilm activity against E. coli and S.aureus

N-(sodium 2-hydroxypropylsulfonate) chitosan (HSCS), N-sulfonate chitosan (SCS) and N-isonicotinic sulfonate chitosan (ISCS) were prepared. The structures of the prepared chitosan derivatives were characterized by nuclear magnetic resonance (1H NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy and elemental analysis (EA). Antibacterial and antibiofilm activities of these chitosan derivatives were evaluated in vitro. The minimum inhibitory concentration (MIC) of HSCS and SCS against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were 0.625 mg/mL and 0.156 mg/mL, respectively. ISCS exhibited MIC values of 0.313 mg/mL and 0.078 mg/mL against E. coli and S. aureus, respectively. ISCS demonstrated superior antibacterial and antibiofilm properties compared to SCS and HSCS. These findings suggest that the incorporation of a pyridine structure into sulfonate chitosan enhances its antibacterial and antibiofilm activities, and the prepared ISCS has a promising application prospect for controlling the reproduction of microorganisms in the field of food packaging.

Preparation of biguanidine quaternary ammonium salts grafted chitosan with enhanced antibacterial and antibiofilm activities

N-(4-N'-pyridine-benzylcarbonyl chloride) chitosan (CBPyC), N-p-biguanidine benzoyl chitosan (CSBG), and N-(p-biguanidine -1-pyridine-4-benzylcarbonyl chloride) chitosan (CSQPG) were synthesized. The structures of prepared chitosan derivatives were characterized using nuclear magnetic resonance spectroscopy (NMR) and ultraviolet-visible (UV-vis) spectroscopy, and the degree of substitution was determined through elemental analysis (EA) and evaluated on the basis of the integral values in 1H NMR. The antibacterial activities of chitosan derivatives against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were investigated in vitro using antibacterial rate, minimal inhibitory concentration and minimum bacterial concentration assays. The antibiofilm activity was also assessed using the crystal violet assay. CSQPC exhibited higher antibacterial and antibiofilm activities against E. coli and S. aureus compared to CBPyC and CSBG. The antibacterial rate of CSQPG against E. coli and S. aureus at a concentration of 0.5 mg/mL was 43.3% and 100%, respectively. The biofilm inhibition rate of CSQPG at 0.5 MIC against E. coli and S. aureus was 56.5% and 69.1%, respectively. At a concentration of 2.5 mg/mL, the biofilm removal rates of E. coli and S. aureus were 72.9% and 90.1%, respectively. The antibacterial and antibiofilm activities of CSQPG were better than CSBG and CBPyC, and the combination of guanidine and quaternary ammonium further improved the positive charge density of chitosan and enhanced its antibacterial activity.

Preparation and application of the thermo-/pH-/ ion-sensitive semi-IPN hydrogel based on chitosan

Chitosan based hydrogels with multiple stimulus responses have broad application prospects in many fields. Considering the advantages of semi interpenetrating network (IPN) technology and the special temperature and ion responsiveness of polymers containing zwitterionic groups, a semi-IPN hydrogel was prepared through in situ free radical polymerization of N,N-dimethyl acrylamide and [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide with polyethylene glycol dimethacrylate as a crosslinker and carboxymethyl chitosan as filler. The gel mass fraction and swelling ratio were measured, and the preparation conditions were optimized. The result indicated that the hydrogel possessed a unique thermo-/pH-/ ion-sensitive behavior. The swelling ratio increased with the increase of temperature and ion concentration, and showed a decreasing trend with the increase in pH. In addition, the hydrogel was stable when the stimuli changed. Adsorption behavior of the hydrogel to Eosin Y (EY) was systematically investigated. The adsorption process can be described well by the pseudo-second-order kinetic model and Langmuir isotherm model, indicating that it was a chemical adsorption. The experiments indicated that the hydrogel exhibited good antifouling and reusability features. Therefore, the semi-IPN hydrogel with antifouling properties and thermo-/pH-/ion-sensitivity can be easily manufactured is expected to find applications in water treatment fields.

Antibacterial Activity and Mechanism of Self-Assembly Spermidine-Capped Carbon Dots against Staphylococcus aureus

This paper investigated the antibacterial mechanism of spermidine-capped carbon dots (S-PCDs) against Staphylococcus aureus. The results showed that there were a large number of amino groups on the surface of S-PCDs and they had a high positive charge (+47.06 mV), which could be adsorbed on the negatively charged bacterial surface through electrostatic interaction and changed the permeability of the bacterial cell membrane. The extracellular protein and nucleic acid contents of S. aureus treated with S-PCDs were 5.4 and 1.2 times higher than those of the control group, respectively. The surface folds and defects of the bacterial cell membrane, and the leakage of cell contents were observed using SEM and TEM. The expression of metabolic oxidation regulatory genes dmpI, narJ and narK was upregulated and the intracellular ROS generation was induced, causing bacterial oxidative stress and eventually bacterial death. S-PCDs can effectively inhibit biofilm formation and had low cytotoxicity. The S-PCD treatment successfully inhibited microbial reproduction when pasteurized milk was stored at 25 °C and 4 °C. These results provide important insights into the antimicrobial mechanism of S-PCDs and lay the foundation for their application in the food field as a potentially novel bacteriostatic nanomaterial.

Synthesizing Carbon Quantum Dots via Hydrothermal Reaction to Produce Efficient Antibacterial and Antibiofilm Nanomaterials

This study aimed to synthesize antibacterial carbon quantum dots (SP-CDs) from polyethyleneimine and spermidine via hydrothermal reaction. It was revealed that SP-CDs, with small size (7.18 nm) and high positive charge (+31.15 mV), had good fluorescence properties and lots of amino groups on their surfaces. The inhibition effect of SP-CDs on Staphylococcus aureus was better than that towards Escherichia coli, and the SP-CDs also had an inhibitory effect on multi-drug-resistant E. coli. The mechanism of SP-CDs shows that the SP-CDs were adsorbed on the surface of the negatively charged cell membrane through electrostatic interaction. SP-CDs can cause changes in membrane permeability, resulting in a shift of the cell membrane from order to disorder and the decomposition of chemical components, followed by the leakage of cell contents, resulting in bacterial death. SP-CDs can also significantly inhibit biofilm formation, destroy mature biofilms and reduce the number of living cells. Moreover, SP-CDs had negligible antimicrobial resistance even after 18 generations of treatment. This study proves that SP-CDs effectively inhibit the proliferation of foodborne pathogens, providing new feasibility for the application of carbon-based nanomaterials in the food industry.

Advances in Diagnostic Approaches and Therapeutic Management in Bovine Mastitis

Mastitis causes huge economic losses to dairy farmers worldwide, which largely negatively affects the quality and quantity of milk. Mastitis decreases overall milk production, degrades milk quality, increases milk losses because of milk being discarded, and increases overall production costs due to higher treatment and labour costs and premature culling. This review article discusses mastitis with respect to its clinical epidemiology, the pathogens involved, economic losses, and basic and advanced diagnostic tools that have been used in recent times to diagnose mastitis effectively. There is an increasing focus on the application of novel therapeutic approaches as an alternative to conventional antibiotic therapy because of the decreasing effectiveness of antibiotics, emergence of antibiotic-resistant bacteria, issue of antibiotic residues in the food chain, food safety issues, and environmental impacts. This article also discussed nanoparticles'/chitosan's roles in antibiotic-resistant strains and ethno-veterinary practices for mastitis treatment in dairy cattle.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Concentration-Dependent Antibacterial Activity of Chitosan on Lactobacillus plantarum

The antimicrobial effect of chitosan and synthetic chitosan derivatives has been confirmed on many Gram-positive and Gram-negative bacteria and fungi. The tests were carried out on pathogenic microorganisms, so the mechanism and concentration dependence of the inhibitory effect of chitosan were revealed. We conducted our tests on a probiotic strain, Lactobacillus plantarum. Commercially available chitosan derivatives of different molecular weights were added to L. plantarum suspension in increasing concentrations. The minimum inhibitory concentration (MIC) value of chitosan was determined and confirmed the viability decreasing effect at concentrations above the MIC with a time-kill assay. The release of bacterium cell content was measured at 260 nm after treatment with 0.001-0.1% concentration chitosan solution. An increase in the permeability of the cell membrane was observed only with the 0.1% treatment. The interaction was also investigated by zeta potential measurement, and the irreversible interaction and concentration dependence were established in all concentrations. The interaction of fluorescein isothiocyanate (FITC) labeled low molecular weight chitosan and bacterial cells labeled with membrane dye (FM^® 4-64) was confirmed by confocal microscopy. In conclusion, the inhibitory effect of chitosan was verified on a probiotic strain, which is an undesirable effect in probiotic preparations containing chitosan additives, while the inhibitory effect experienced with pathogenic strains is beneficial.

Progress in Research of Chitosan Chemical Modification Technologies and Their Applications

Chitosan, which is derived from chitin, is the only known natural alkaline cationic polymer. Chitosan is a biological material that can significantly improve the living standard of the country. It has excellent properties such as good biodegradability, biocompatibility, and cell affinity, and has excellent biological activities such as antibacterial, antioxidant, and hemostasis. In recent years, the demand has increased significantly in many fields and has huge application potential. Due to the poor water solubility of chitosan, its wide application is limited. However, chemical modification of the chitosan matrix structure can improve its solubility and biological activity, thereby expanding its application range. The review covers the period from 1996 to 2022 and was elaborated by searching Google Scholar, PubMed, Elsevier, ACS publications, MDPI, Web of Science, Springer, and other databases. The various chemical modification methods of chitosan and its main activities and application research progress were reviewed. In general, the modification of chitosan and the application of its derivatives have had great progress, such as various reactions, optimization of conditions, new synthetic routes, and synthesis of various novel multifunctional chitosan derivatives. The chemical properties of modified chitosan are usually better than those of unmodified chitosan, so chitosan derivatives have been widely used and have more promising prospects. This paper aims to explore the latest progress in chitosan chemical modification technologies and analyze the application of chitosan and its derivatives in various fields, including pharmaceuticals and textiles, thus providing a basis for further development and utilization of chitosan.

Single-cell Raman spectroscopy identifies Escherichia coli persisters and reveals their enhanced metabolic activities

Microbial persisters are the featured tiny sub-population of microorganisms that are highly tolerant to multiple antimicrobials. Currently, studies on persisters remain a considerable challenge owing to technical limitations. Here, we explored the application of single-cell Raman spectroscopy (SCRS) in the investigation of persisters. Escherichia coli (ATCC 25922) cells were treated with a lethal dosage of ampicillin (100 μg/mL, 32 × MIC, 4 h) for the formation of persisters. The biochemical characters of E. coli and its persisters were assessed by SCRS, and their metabolic activities were labeled and measured with D₂O-based single-cell Raman spectroscopy (D₂O-Ramanometry). Notable differences in the intensity of Raman bands related to major cellular components and metabolites were observed between E. coli and its ampicillin-treated persisters. Based on their distinct Raman spectra, E. coli and its persister cells were classified into different projective zones through the principal component analysis and t-distributed stochastic neighbor embedding. According to the D₂O absorption rate, E. coli persisters exhibited higher metabolic activities than those of untreated E. coli. Importantly, after the termination of ampicillin exposure, these persister cells showed a temporal pattern of D₂O intake that was distinct from non-persister cells. To our knowledge, this is the first report on identifying E. coli persisters and assessing their metabolic activities through the integrated SCRS and D₂O-Ramanometry approach. These novel findings enhance our understanding of the phenotypes and functionalities of microbial persister cells. Further investigations could be extended to other pathogens by disclosing microbial pathogenicity mechanisms for developing novel therapeutic strategies and approaches.

Characterization, antimicrobial and cytotoxic activity of polymer blends based on chitosan and fish collagen

This study aims to produce, characterize, and assess the antimicrobial activity and cytotoxicity of polymer blends based on chitosan (CT) and fish collagen (COL) produced by different precipitation methods. Polymer blends were obtained in alkaline (NaOH), saline (NaCl), and alkaline/saline (NaOH/NaCl) solutions with different CT:COL concentration ratios (20:80, 50:50, and 80:20). The polymer blends were characterized by various physicochemical methods and subsequently evaluated in terms of their in vitro antimicrobial and cytotoxicity activity. In this study, the degree of chitosan deacetylation was 82%. The total hydroxyproline and collagen content in the fish matrix was 47.56 mg. g-1 and 394.75 mg. g-1, respectively. The highest yield was 44% and was obtained for a CT:COL (80:20) blend prepared by precipitation in NaOH. High concentrations of hydroxyproline and collagen in the blends were observed when NaOH precipitation was used. Microbiological analysis revealed that the strains used in this work were sensitive to the biomaterial; this sensitivity was dose-dependent and increased with increasing chitosan concentration in the products. The biocompatibility test showed that the blends did not reduce the viability of fibroblast cells after 48 h of culture. An analysis of the microbiological activity of the all-polymer blends showed a decrease in the values of minimal inhibitory concentration (MIC) and minimal bactericidal concentrations (MBC) for S. aureus and P. aeruginosa. The blends showed biocompatibility with NIH-3T3 murine fibroblast cells and demonstrated their potential for use in biomedical applications such as wound healing, implants, and scaffolds.

Mechanism and Application of Chitosan and Its Derivatives in Promoting Permeation in Transdermal Drug Delivery Systems: A Review

The mechanisms and applications of chitosan and its derivatives in transdermal drug delivery to promote drug permeation were reviewed in this paper. Specifically, we summarized the permeation-promoting mechanisms of chitosan and several of its derivatives, including changing the structure of stratum corneum proteins, acting on the tight junction of granular layers, affecting intercellular lipids, and increasing the water content of stratum corneum. These mechanisms are the reason why chitosan and its derivatives can increase the transdermal permeation of drugs. In addition, various transdermal preparations containing chitosan and its derivatives were summarized, and their respective advantages were expounded, including nanoparticles, emulsions, transdermal microneedles, nanocapsules, transdermal patches, transdermal membranes, hydrogels, liposomes, and nano-stents. The purpose of this review is to provide a theoretical basis for the further and wider application of chitosan in transdermal drug delivery systems. In the future, research results of chitosan and its derivatives in transdermal drug delivery need more support from in vivo experiments, as well as good correlation between in vitro and in vivo experiments. In conclusion, the excellent permeability-promoting property, good biocompatibility, and biodegradability of chitosan and its derivatives make them ideal materials for local transdermal drug delivery.

Preparation, characterization, and antibiofilm activity of cinnamic acid conjugated hydroxypropyl chitosan derivatives

In this study, cinnamic acid (CA) conjugated hydroxypropyl chitosan (HPCS) derivatives (HPCS-CA) with different degrees of substitution (DS) were successfully synthesized. The reaction was divided into two steps: the first step was to modify chitosan (CS) to HPCS, and the second step was to graft CA onto HPCS. Structural characterization and properties were carried out employing elemental analysis, Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, nuclear magnetic resonance (NMR) spectra, X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The solubility test revealed the better water solubility of derivatives than CS. In addition, in vitro antibacterial and antibiofilm tests were performed. As expected, HPCS-CA derivatives exhibited good antibacterial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The MIC and MBC of HPCS-CA derivatives could reach 256 μg/mL and 512 μg/mL, respectively. Confocal laser scanning microscopy (CLSM) analysis proved the inhibitory effect of HPCS-CA derivatives on S. aureus and E. coli biofilms by disrupting the formation of biofilms, reducing the thickness of biofilms, and the number of live bacteria. These results suggest the potential applicability of HPCS-CA derivatives in the treatment of biofilm-associated infections and provide a practical strategy for the design of novel CS-based antibacterial materials.

Effect of Lipopeptide-Loaded Chitosan Nanoparticles on Candida albicans Adhesion and on the Growth of Leishmania major

Cyclic lipopeptides produced by Bacillus species exhibit interesting therapeutic potential. However, their clinical use remains limited due to their low stability, undesirable interactions with host macromolecules, and their potential toxicity to mammalian cells. The present work aims to develop suitable lipopeptide-loaded chitosan nanoparticles with improved biological properties and reduced toxicity. Surfactin and bacillomycin D lipopeptides produced by Bacillus amyloliquefaciens B84 strain were loaded onto chitosan nanoparticles by ionotropic gelation process. Nanoformulated lipopeptides exhibit an average size of 569 nm, a zeta potential range of 38.8 mV, and encapsulation efficiency (EE) of 85.58%. Treatment of Candida (C.) albicans cells with encapsulated lipopeptides induced anti-adhesive activity of 81.17% and decreased cell surface hydrophobicity (CSH) by 25.53% at 2000 µg/mL. Nanoformulated lipopeptides also induced antileishmanial activity against Leishmania (L.) major promastigote and amastigote forms at respective IC₅₀ values of 14.37 µg/mL and 22.45 µg/mL. Nanoencapsulated lipopeptides exerted low cytotoxicity towards human erythrocytes and Raw 264.7 macrophage cell line with respective HC₅₀ and LC₅₀ values of 770 µg/mL and 234.56 µg/mL. Nanoencapsulated lipopeptides could be used as a potential delivery system of lipopeptides to improve their anti-adhesive effect against C. albicans cells colonizing medical devices and their anti-infectious activity against leishmania.

Synthesis and characterization of chitosan/polyacrylamide hydrogel grafted poly(N-methylaniline) for methyl red removal

Chitosan/polyacrylamide hydrogel grafted poly(N-methylaniline) (CS/PACM-gr-PNMA) was good synthesized by chemical oxidative radical polymerization using potassium persulphate (KPS). The obtained polymer samples are characterized using IR and Uv-visible spectroscopy. Both surface properties and thermal stability were studied using XRD, SEM, BET and TGA techniques respectively. The characterized polymeric samples were used as a new sorbent for methyl red (MR). MR as an example of azo-dyes presence as pollutants in industrial wastewater which cause physiological damages was chosen to uptake. The influence of contact time, adsorbent dose, and temperature on the efficiency of CS/PACM-gr-PNMA towards the removal of MR was investigated. The efficacy was equal to 98% through 120 min at room temperature. The obtained data show that, ∆H = -21.478 kJ mol^-1, so adsorption process is physically spontaneous and follow Freundlich isotherm. The sorption process of MR on the surface of CS/PACM-gr-PNMA is proceed via the Lagergren pseudo-second order reaction. This confirms the removal mechanism by both chemical and physical adsorption of MR with both unpaired and π electrons present in polymer structure on NH, NH_2, and benzene or quinoid units respectively. In addition, it can explain the chemical adsorption type which occurs through sharing between the used adsorbent materials and the dissolved materials beside the physical adsorption.

Chitosan Natural Polymer Material for Improving Antibacterial Properties of Textiles

In recent years, the textile industry has been seeking to develop innovative products. It is a good choice to organically combine materials with superior functional characteristics and commercial textiles to form products with excellent performance. In particular, textiles made of biological functional materials are often beneficial to human health, which is an interesting research direction. As a biopolymer material, chitosan has the advantages of strong availability, low cost, excellent safety, outstanding performance, etc., particularly the antibacterial property, and has broad application prospects in the textile field. This review provides an overview of the latest literature and summarizes recent innovations and state-of-the-art technologies that can add value to textiles. To this end, preparation of chitosan fiber, synthesis of chitosan nanofiber, antibacterial activity of chitosan fiber, antibacterial activity of chitosan nanofiber, etc., will be discussed. Furthermore, the challenges and prospects of chitosan-based materials used in textiles are evaluated. Importantly, this review can not only help researchers understand the development status of antibacterial textiles, but also help researchers discover and solve problems in this field through comparative reading.

Multistage Extraction of Star Anise and Black Pepper Derivatives for Antibacterial, Antioxidant, and Anticancer Activity

Recently, natural resources have attracted considerable interest for their applications in food security and human health problems. Traditional natural spices, such as star anise and black pepper, played important roles in the pharmaceutical and food industries due to their strong pharmacological activity, antioxidant potential and rare complications. In order to achieve biomasses from the natural product with multiple bioactivities, we developed the multistage extraction method to extract and separate various bioactive compounds from these natural plants. Our work demonstrated that various bioactive-rich extractives were achieved using steam distilled- or oxidative-extraction methods with high extraction yields and purity. Furthermore, the extractives in each step can be used not only as bioactive compounds, but also as a resource to further prepare different derivatives during the next extractive step, providing biomass-saving to a great extent. The extractives obtained with high yields and purities (>82%) were identified by ¹H NMR, ¹³C NMR, FTIR, UV-vis, fluorescence spectroscopy, and high-performance liquid chromatography (HPLC). Moreover, these biomasses display potent antibacterial activities against some types of microorganisms such as S.aureus, S.pyogenes, E.coli, and S.typhi with a lowest MIC of 400 μg/ml for the development of antibacterial agents, significant antioxidant activity as the natural antioxidant for enhancing food shelf-life, and excellent anticancer activity that induces significant cancer cell apoptosis. This work showed the different multistage extracts from natural products, which enable them to be applied in the fields of the pharmaceutical industry and the food industry.

Novel Strategies to Combat Bacterial Biofilms

Biofilms are considered as a severe problem in the treatment of bacterial infections; their development causes some noticeable resistance to antibacterial agents. Biofilms are responsible for at least two-thirds of all infections, displaying promoted resistance to classical antibiotic treatments. Therefore, finding new alternative therapeutic approaches is essential for the treatment and inhibition of biofilm-related infections. Therefore, this review aims to describe the potential therapeutic strategies that can inhibit bacterial biofilm development; these include the usage of antiadhesion agents, AMPs, bacteriophages, QSIs, aptamers, NPs and PNAs, which can prevent or eradicate the formation of biofilms. These antibiofilm agents represent a promising therapeutic target in the treatment of biofilm infections and development of a strong capability to interfere with different phases of the biofilm development, including adherence, polysaccharide intercellular adhesion (PIA), quorum sensing molecules and cell-to-cell connection, bacterial aggregation, planktonic bacteria killing and host-immune response modulation. In addition, these components, in combination with antibiotics, can lead to the development of some kind of powerful combined therapy against bacterial biofilm-related infections.

Antibacterial and Antibiofilm Formation Activities of Pyridinium-Based Cationic Pillar[5]arene Against Pseudomonas aeruginosa

An omnipresent pathogenic bacterium, Pseudomonas aeruginosa (P. aeruginosa PAO1), is easy to contaminate environmental water or foods, causing daily food spoilage and infections. The biofilm-forming ability and bacterial resistance of P. aeruginosa PAO1 make it difficult to be eradicated by traditional bacteriostatic agents. In this work, we designed and synthesized a pyridinium-based pillar[5]arene (PP5), while trimethylammonium-based pillar[5]arene (TP5) was used as a control compound. After clear characterization, the antibacterial and antibiofilm activities as well as the microbial resistance of TP5 and PP5 against P. aeruginosa PAO1 were extensively examined. It was revealed that PP5 exhibited good inhibition activity with the minimum inhibitory concentration (MIC) of 0.051 mmol/L, while no significant antibacterial and biofilm formation activity for TP5 against P. aeruginosa PAO1 was observed. More importantly, PP5 had negligible antimicrobial resistance even after 18th passages. A transmission electron microscope (TEM) showed that PP5 could physically disrupt the cell membranes, causing the leakage of internal constituents, which is possibly ascribed to the synergistic penetrability and π-π interactions of strain, thus greatly reduced the development of bacterial resistance. Overall, the presented studies indicated that pyridinium moieties could facilitate the cationic pillar[5]arene to generate surprising antibacterial and antibiofilm formation ability against P. aeruginosa PAO1.

Staphylococcus aureus biofilm eradication by the synergistic effect exerted by PEG-coated silicon dots immobilized in silica films and light irradiation

Immobilization of PEG-covered silicon dots, PEGSiDs, on glass substrates was performed following a simple strategy involving particle embedding by a sol-gel process forming a silica film on glass slides. The obtained films, denoted as fSiO _x -PEGSiD, constitute a water-wettable, strongly supported, photoluminescent glass coating. The films showed high capacity for photosensitizing singlet oxygen (¹O₂) in the UVA when immersed in water. Staphylococcus aureus colonies formed on fSiO _x -PEGSiDs modified glasses revealed the inhibition of bacterial adhesion and bacterial growth leading to the formation of loosely-packed and smaller S. aureus colonies. Upon 350 nm light irradiation of the biofilmed fSiO _x -PEGSiDs -modified glasses, S. aureus growth was inhibited and bacteria killed reducing the number of living bacteria by three orders of magnitude. Eradication of attached bacteria was achieved by the synergistic effect exerted by a less adherent fSiO _x -PEGSiDs surface that inhibits biofilm formation and the ability of the surface to photosensitize ¹O₂ to kill bacteria.

Efficient N-sulfopropylation of chitosan with 1,3-propane sultone in aqueous solutions: neutral pH as the key condition

Conjugation of strong anionic sulfonate groups to chitosan (CS) is typically used for converting the weak cationic CS to its polyampholyte derivatives, which are of interest to different areas benefiting from both cationic and anionic groups.

Insight into the effect of sulfonated chitosan on the structure, rheology and fibrillogenesis of collagen

As a heparin analogue, sulfonated chitosan (SCS) has been confirmed to have similar structure and properties to heparin which is shown to be a linker molecule having specific binding sites with collagen fibrils. In this study, the effects of a varying concentration of SCS on the self-assembly process of type I collagen were investigated. The study on intermolecular interaction between collagen and SCS was carried out via using ultraviolet-visible (UV-vis) spectrophotometry and circular dichroism (CD) spectroscopy. The addition of SCS did not disrupt the triple helix conformation of collagen. However, the decreased value of Rpn showed that the SCS, to some extent, influenced the percentage of triple helix conformation. The turbidity measurements revealed that the self-assembly rate was increased in the presence of a low concentration of SCS whereas decreased with further increasing the SCS concentration. The observation of microstructure via scanning electron microscopy (SEM) and atomic force microscopy (AFM) exhibited the characteristic D-periodicity, indicating that the presence of SCS did not disrupt the self-assembly nature of collagen. Moreover, the addition of SCS facilitated the lateral aggregation of fibrils, leading to the formation of larger fibrils. The rheological analysis showed that the gelation time of collagen was prolonged with increasing the concentration of SCS, in support of a longer lag-phase duration detected in turbidimetric measurements. We expect that valuable data would be provided in this study for further developing of ECM analogues, and propitious performances could be endowed to these biomimetic materials after SCS incorporation.

Antimicrobial and Antibiofilm Capacity of Chitosan Nanoparticles against Wild Type Strain of Pseudomonas sp. Isolated from Milk of Cows Diagnosed with Bovine Mastitis

Bovine mastitis (BM) is the most prevalent bacterial infection in the livestock sector, affecting the dairy industry greatly. The prevention and treatment of this disease is mainly made via antibiotics, but the increasing antimicrobial resistance of pathogens has affected the efficiency of conventional drugs. Pseudomonas sp. is one of the pathogens involved in this infection. The therapeutic rate of cure for this environmental mastitis-causing pathogen is practically zero, regardless of treatment. Biofilm formation has been one of the main virulence mechanisms of Pseudomonas hence presenting resistance to antibiotic therapy. We have manufactured chitosan nanoparticles (NQo) with tripolyphosphate (TPP) using ionotropic gelation. These NQo were confronted against a Pseudomonas sp. strain isolated from milk samples of cows diagnosed with BM, to evaluate their antimicrobial and antibiofilm capacity. The NQo showed great antibacterial effect in the minimum inhibitory concentrations (MIC), minimum bactericidal concentration (MBC) and disk diffusion assays. Using sub lethal concentrations, NQo were tested for inhibition of biofilm formation. The results show that the nanoparticles exhibited biofilm inhibition and were capable of eradicate pre-existing mature biofilm. These findings indicate that the NQo could act as a potential alternative to antibiotic treatment of BM.

Preparation and characterization of chitosan/poly(vinyl alcohol)/graphene oxide films and studies on their antibiofilm formation activity

Biocomposite films containing graphene oxide (GO), poly(vinyl alcohol) (PVA), and chitosan (CS) were prepared using the casting/evaporation technique. These as-prepared films were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Results showed that these three component films could be well mixed in certain conditions and the GO sheets were well dispersed. The better performances such as the water resistance, thermal stability, and mechanical properties have been improved. Meanwhile, good antibacterial activity and antibiofilm formation activity of the prepared CS/PVA/GO films were exhibited against Pseudomonas aeruginosa PAO1. The resulting biocomposite films with combination of CS, PVA, and GO advantages have desirable properties and should be suitable for food and medical packaging applications.

Construction of antimicrobial and biocompatible cotton textile based on quaternary ammonium salt from rosin acid

Antimicrobial cotton textiles (CT) show great promise for wound dressings. However, modifying CTs to have antimicrobial properties requires balancing the killing of microbes while protecting normal cells. In this study, the surface of CT was modified using maleopimaric acid quaternary ammonium cations (MPA-N⁺) from rosin acid. The surfaces morphology and chemical composition were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS), which confirmed that the MPA-N⁺ modified CT (CT-g-MPA-N⁺) was prepared. CT-g-MPA-N⁺ shows strong and broad spectrum antimicrobial activities against Gram-negative bacteria (Escherichia coli, Pseudomonas aeruginosa) and Gram-positive bacteria (Staphylococcus aureus). It also exhibits prominent durability of antimicrobial capability even after soaking in PBS for 6 days, and can effectively inhibit bacterial biofilm formation. Most importantly, the excellent biocompatibility of CT-g-MPA-N⁺ was verified by hemocompatible and cytotoxic assays. This work is believed to be promising method to prepare antimicrobial cotton textiles by surface modification and suggest the great potential application in wound dressing.

Effects of Beef Juice on Biofilm Formation by Shiga Toxin-Producing Escherichia coli on Stainless Steel

Shiga toxin-producing Escherichia coli (STEC) are a leading cause of foodborne illnesses worldwide, with beef and beef products as a common food reservoir. STEC strains may be present in beef-processing environments in the form of biofilms. The exudate of raw beef, also referred to as beef juice, has been identified as an important source of bacterial contamination on food-processing surfaces. This study applied beef juice as a food-based model to study its effects on biofilm formation of six STEC isolates on stainless steel. Crystal violet staining and cell enumeration demonstrated that beef juice inhibited the biofilm formation of strains O113, O145, and O91 up to 24 h at 22°C, but that biofilm increased (p < 0.05) thereafter over 72 h. Biofilms formed by O157, O111, and O45 were not affected by the addition of beef juice over the whole incubation period. Electron microscopy showed that the morphology of biofilm cells was altered and more extracellular matrix was produced with beef juice than with M9 medium. The present study demonstrated that beef juice residues on stainless steel can enhance biofilm formation of some STEC strains. Thorough and frequent cleaning of meat residues and exudate during meat production and handling is critical to reduce STEC biofilm formation even at 13°C.

Anti-biofilm investigation of graphene/chitosan nanocomposites against biofilm producing P. aeruginosa and K. pneumoniae

In this study graphene/chitosan nanoparticles (GR/CS NCs) were developed. The homogenous combination of GR and CS was confirmed by FTIR spectroscopy. The combination of CS with GR sheets reduced the XRD intensity of the GR peak in GR/CS NCs, while TEM images revealed the immobile CS coating of GR sheets. Further, the anti-biofilm activity of GR/CS NCs was tested. The tests showed that the formation of biofilm by Pseudomonas aeruginosa and Klebsiella pneumoniae was inhibited at 40□g/mL GR/CS NCs up to 94 and 92 %, respectively. The intracellular and cell surface damage of the bacteria was observed by CLSM and SEM. Also, GR/CS NCs produced a toxic effect of 90 % on Artemia franciscana at 70□g/mL upon 24 h incubation. The recorded properties of the synthesized GR/CS NCs qualify them as potential agents against multi-drug resistant bacteria.

Functional Synergy Of Antimicrobial Peptides And Chlorhexidine Acetate Against Gram-Negative/Gram-Positive Bacteria And A Fungus In Vitro And In Vivo

BACKGROUND AND PURPOSE

To reduce the resistance and allergic reaction to chlorhexidine acetate (CHA) in the current treatment of (Bacterial vaginosis) BV and (vulvovaginal candidiasis) VVC in female vaginitis. In this study, the antimicrobial activities and mechanism of action of the synergistic effects of antimicrobial peptides (AMPs) HPRP-A1 and HPRP-A2, and CHA, against Gram-negative and Gram-positive bacteria, and one fungus Candida albicans (C. albicans) were investigated in vitro and in mouse and rat vaginitis infection models in vivo.

RESULTS

HPRP-A1, HPRP-A2 and CHA showed significant synergistic effects on the antimicrobial activities against different Gram-negative and Gram-positive bacteria and C. albicans. The combined application of HPRP-A2 and CHA exhibited strong synergistic effects in the mouse and rat vaginitis models caused by bacteria or C. albicans.

CONCLUSION

This study may prompt the development of new drug combinations against vaginitis infections, including mixed bacterial and fungal infections and multi-drug-resistant infections.