Reinforcement of the antimicrobial activity and biofilm inhibition of novel chitosan-based hydrogels utilizing zinc oxide nanoparticles

Aegle marmelos-mediated zinc oxide nanoparticles for mosquito control, cancer therapy, and antibacterial applications

The study investigated the synthesis and characterization of zinc oxide nanoparticles (Am-ZnO-NPs) using Aegle marmelos leaves and their mosquitocidal, antioxidant, and anticancer efficacy. Am-ZnO-NPs were synthesized via combustion method under optimized conditions, including 5% plant extract, temperature of 70 °C, a contact time of 60 min, and pH of 10. The resulting nanoparticles were characterized using advanced analytical techniques. The Am-CuO-NPs were hexagonal wurtzite in shape and had an average particle size of 37.44 nm. The Am-CuO-NPs are highly stable with a surface charge of - 26.77 mV. Gas chromatography-mass spectrometry (GC-MS) analysis identified several compounds with insecticidal, antioxidant, and anticancer properties, including hexadecenoic acid, ethyl ester (25.61%), 9,12-octadecadienoic acid, ethyl ester (12.64%), and 9,12,15-octadecatrienoic acid, ethyl ester (6.31%). The aqueous extract of A. marmelos (100 µg/mL) demonstrated the highest larvicidal (57.33%) and pupicidal (42.67%) activities compared to other solvent extracts. In contrast, Am-ZnO-NPs exhibited relatively higher larvicidal activity (86.67%) and pupicidal (56.00%) at 10 µg/mL. The nanoparticles also inhibited the activities of acetylcholinesterase (AChE) and carboxylesterases and reduced the total protein (TP) levels in Ae. aegypti larvae. Further, both the aqueous leaf extract and Am-ZnO-NPs were effective in scavenging DPPH free radicals, achieving 76% and 94% inhibition, respectively, at a concentration of 125 µg/mL. Am-ZnO-NPs also exhibited cytotoxicity, induced cell cycle arrest, enhanced cell adhesion, and promoted apoptosis in L-132 lung cancer cell lines. Further, the Am-ZnO-NPs display potent antibacterial activity against clinical pathogens. These results highlight the role of phytochemicals in A. marmelos leaves for their effective biological activities.

Design, Synthesis, and Characterization of Novel Pyrazole Cross-Linked Chitosan Derivatives Modified with Zinc Oxide Nanoparticles for Boosting Their Anticancer Activity

A new series of chitosan-based pyrazole derivatives was successfully prepared via crosslinking chitosan using either malonopyrazole (MPy-Cs) or thiopyrazole (TPy-Cs). Three derivatives of TPy-Cs were produced based on their content of TPy, namely TPy-Cs1, TPy-Cs2, and TPy-Cs3 of crosslinking degrees of 71, 48, and 29%, respectively. Further, various weight ratios of ZnO nanoparticles were loaded into some of these derivatives to obtain the corresponding ZnONP bio-composites. FTIR, XRD, SEM, and TEM techniques were employed to emphasize the chemical, internal, and morphological structure of these derivatives. Although MPy-Cs derivatives did not show any activity against all the examined cancer cell lines, TPy-Cs derivatives exhibited an appreciable anticancer activity which greatly improved with increasing their TPy content, i.e., from TPy-Cs3 to TPy-Cs1. The TPy-Cs1 displayed IC50 (14.4 μg/mL) against the HN9 cell line that was comparable to the Doxorubicin (DOX) standard drug (12.6 μg/mL). Among all the prepared composites, TPy-Cs3/ZnONPs-5% was the most potent anticancer candidate against all the tested cancer cell lines, although it does not exceed the anticancer activity of DOX. Tpy-Cs2 and its ZnONP composites were safe on normal human skin fibroblast (HSF) cell lines. Thus, the inclusion of both TPy and ZnONPs into the chitosan matrix fostered its anticancer efficiency.

Insights into the Versatile and Efficient Characteristics, Classifications, and Rational Design of Surface-Grafted Smart Hydrogels

Hydrogels have emerged as flexible biomaterials with enormous potential in biomedical applications due to their outstanding biocompatibility and ability to hold a high water concentration. Hydrogels have low toxicity and are biodegradable. This review begins with a look at the various riveting characteristics and classifications of hydrogel nanocomposites reinforced with various metallic and ceramic components. A distinct focus is offered on thoroughly deliberating surface modification techniques with special attention on fabrication, patterning, and their applications in biomedical fields. The review describes the value of novel cross-linking techniques including physical, chemical, and physical-chemical dual cross-linking in adapting hydrogel characteristics to specific applications. This review also explains the major bioapplication of functionalized hydrogels. It emphasizes the importance of nanocomposite hydrogels and multifunctional self-assembled monolayers in solving contemporary biological difficulties such as infection control, medication delivery, and tissue regeneration. It explains the need for interdisciplinary collaboration and ongoing research efforts to realize the full potential of hydrogels and nanomaterials in biomedical applications. Overall, this review gives useful insights into current advances and future possibilities for hydrogels grafted with metals and ceramic additives in biomedical applications, highlighting the need for multidisciplinary cooperation and ongoing research in nano(bio)technology.

Water-soluble chlorogenic acid-chitosan and polydatin-chitosan conjugates: antibacterial activity and inhibition of lipid and protein oxidation

BACKGROUND

Chitosan (CS), an abundant alkaline polysaccharide, is valued for its biocompatibility, non-toxicity, and antibacterial properties. However, its limited solubility and modest antioxidant activity constrain its utility. Grafting polyphenols onto chitosan through the use of grafting reactions can enhance both the solubility and bioactivity of chitosan. Among the techniques employed, the free radical grafting method is favored for its simplicity, environmental sustainability, and its effectiveness in preserving biological activity.

RESULTS

In this study, chlorogenic acid (CGA) and polydatin (PLD) were conjugated successfully to chitosan by a Vc/H2O2 redox system. Analytical techniques such as ultraviolet-visible (UV-visible) spectroscopy, fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and proton nuclear magnetic resonance (1H NMR) were employed to confirm the formation of covalent bonding between the polyphenol molecules and the chitosan backbone. The novel conjugates displayed superior antioxidant properties in comparison with pristine chitosan, as evidenced by their enhanced 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical, 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) radical, and hydroxyl radical scavenging capacities, and Fe2+ reducing power. Both CGA-CS and PLA-CS exhibited excellent lipid and protein oxidation inhibition capabilities. Furthermore, the conjugates were shown to have significant antibacterial effects against four common pathogenic bacteria: Pseudomonas fluorescens, Pseudomonas aeruginosa, Pseudomonas putida, and Staphylococcus aureus (P < 0.05).

CONCLUSION

The newly synthesized water-soluble polyphenol-chitosan conjugates demonstrated remarkable biological activity, particularly CGA-CS. This study offers new insights and a strong theoretical foundation for developing natural food preservation materials with potential applications in the food industry. © 2024 Society of Chemical Industry.

An Assay on the Antibactericidal Functionality of Synthesized Mg-Doped ZnO Nanoparticles on the Dental Microbes

We succeeded in producing pure and magnesium-doped zinc oxide nanoparticles (Mg-Zn NPs) by making use of a Prosopis farcta leaf extract and subsequently distinguished the quality of our NPs with the use of field energy scanning electron microscopy (FESEM), energy-dispersive X-ray (EDX), powder X-ray diffraction (PXRD), and UV-vis. In correlation to our observations, the particulates were spherically produced at a size of 20 nm with the ability to cause antimicrobial impacts on Streptococcus mutans bacteria and Candida albicans fungi. Inhibition zones of 18 ± 0.3 and 24 ± 0.3 mm were obtained for 5% Mg-Zn NPs against bacteria and fungi, respectively. Based on these results, our work suggests a practicable proposition for our synthesized product to be considered as a worthy alternative for dental and oral utilizations.

Improving Antimicrobial Properties of Biopolymer-Based Films in Food Packaging: Key Factors and Their Impact

Biodegradable films derived from polysaccharides are increasingly considered eco-friendly alternatives to synthetic packaging in the food industry. The study's purpose was to improve the antimicrobial properties of biopolymer-based films made from starch, chitosan, alginate, and their blends (starch/chitosan and starch/alginate) and to evaluate the effects of modifiers, i.e., plant extracts, plasticizers, cross-linking agents, and nanofillers. Films were prepared via the Solution Casting Method and modified with various plasticizers, calcium chloride, oxidized sucrose, and nanofiber cellulose (NC). Chestnut, nettle, grape, and graviola extracts were tested for antimicrobial activity against Staphylococcus epidermidis, Escherichia coli, and Candida albicans. The film's mechanical and hydrophilic properties were studied as well. The chestnut extract showed the strongest antimicrobial properties, leading to its incorporation in all the films. The chitosan films displayed better antibacterial activity against Gram-positive than Gram-negative bacteria but were ineffective against C. albicans. NC significantly improved the mechanical and antimicrobial properties of the chitosan films. The alginate films, modified with various plasticizers cross-linked with calcium chloride, demonstrated the highest antimicrobial efficacy against E. coli. The starch films, cross-linked with oxidized sucrose, exhibited slightly lower antimicrobial resistance due to a more compact structure. Films such as ALG6 and ALG5, including plasticizers EPGOS and PGOS, respectively, indicated optimal hydrophilicity and mechanical properties and achieved the best antimicrobial performance against all the investigated microorganisms. All these findings highlight the potential of these biodegradable films for food packaging, offering enhanced antimicrobial activity that prolongs shelf life and reduces spoilage, making them promising candidates for sustainable food preservation.

Temperature-responsive two-dimensional polydopamine hydrogel: Preparation, mechanisms, and applications in cancer treatment

Temperature-responsive hydrogels are advanced materials that exhibit significant physical or chemical changes in response to temperature variations. When the temperature reaches a specific threshold, these hydrogels alter their properties accordingly. They offer significant advantages in cancer therapy, including precise control over drug release, minimized toxicity, improved therapeutic efficacy, and biodegradability. Advancing the development of novel temperature-responsive hydrogels is crucial for enhancing therapeutic strategies. Herein, two-dimensional polydopamine (2D PDA) was first combined with chitosan (CTS) to create a temperature-responsive hydrogel for the control and release of anticancer drugs. Leveraging the carbonyl-rich nature of 2D PDA, we initiated a reversible cyclization reaction between CTS and the carbonyl groups on the surface of 2D PDA, resulting in a temperature-responsive CTS@2D PDA (CP) hydrogel. Furthermore, the CP hydrogel template was incorporated with the photosensitizer zinc phthalocyanine (ZnPc) and sodium percarbonate (SPC), an oxygen (O2) donor, to form a composite hydrogel (CSZP hydrogel). O2 released from the CSZP hydrogel mitigated solid tumor hypoxia and suppressed the expression of hypoxia-inducible factor-1α (HIF-1α), thereby augmenting the efficacy of photodynamic therapy (PDT). This temperature-responsive hydrogel represented a highly promising platform for the precise and controlled release of various therapeutics, thereby advancing the field of targeted disease treatment.

Preparation and Properties of Crosslinked Quaternized Chitosan-Based Hydrogel Films Ionically Bonded with Acetylsalicylic Acid for Biomedical Materials

The aim of the current study is to develop chitosan-based biomaterials which can sustainably release acetylsalicylic acid while presenting significant biological activity. Herein, an innovative ionic bonding strategy between hydroxypropyl trimethyl ammonium chloride chitosan (HACC) and acetylsalicylic acid (AA) was proposed, skillfully utilizing the electrostatic attraction of the ionic bond to achieve the controlled release of drugs. Based on this point, six crosslinked N-[(2-hydroxy-3-trimethylammonium)propyl]chitosan acetylsalicylic acid salt (CHACAA) hydrogel films with varying acetylsalicylic acid contents were prepared by a crosslinking reaction. The results of 1H nuclear magnetic resonance spectroscopy (1H NMR) and scanning electron morphology (SEM) confirmed the crosslinked structure, while the obtained hydrogel films possessed favorable thermal stability, mechanical properties, and swelling ability. In addition, the drug release behavior of the hydrogel films was also investigated. As expected, the prepared hydrogel films demonstrated the capability for the sustainable release of acetylsalicylic acid due to ion pair attraction dynamics. Furthermore, the bioactivities of CHACAA-3 and CHACAA-4 hydrogel films with acetylsalicylic acid molar equivalents of 1.25 and 1.5 times those of HACC were particularly pronounced, which not only exhibited an excellent drug sustained-release ability and antibacterial effect, but also had a higher potential for binding and scavenging inflammatory factors, including NO and TNF-α. These findings suggest that CHACAA-3 and CHACAA-4 hydrogel films hold great potential for applications in wound dressing, tissue engineering scaffolds, and drug carriers.

Synthesis, characterization and evaluation of in vitro potential antimicrobial efficiency of new chitosan hydrogels and their CuO nanocomposites

The phenomenon of microbial resistance and its resulting biofilms to traditional antibiotics is worsening over time. Therefore, the discovery of alternative substances that inhibit microbial activities through mechanisms different from those of known antibiotics requires attention. So, chitosan was crosslinked using different amounts of oxalyl dihydrazide yielding four novel hydrogels; ODHCs-I, ODHCs-II, ODHCs-III, and ODHCs-IV of crosslinking degree 12.17, 20.67, 31.67, and 43.17, respectively. Different amounts of CuO nanoparticles were impregnated into ODHCs-IV, obtaining ODHCs-IV/CuONPs-1 %, ODHCs-IV/CuONPs-3 % and ODHCs-IV/CuONPs-5 % composites. Their structure was emphasized using FTIR, SEM, XRD, TEM, EDX and elemental analysis. Their in vitro antimicrobial and anti-biofilm activities improved with increasing ODH and CuONPs content. ODHCs-IV exhibited minimal inhibition concentration (2 μg/mL) against S. pyogenes that was much lower than Vancomycin (3.9 μg/mL). ODHCs-IV/CuONPs-5 % displayed better inhibition performance than Vancomycin and Amphotericin B against Gram-positive-bacteria and fungi, respectively, and comparable one to that of Vancomycin against Gram-negative-bacteria. ODHCs-IV/CuONPs-5 % displayed much lower minimal biofilm inhibition concentrations (1.95 to 3.9 μg/mL) as compared with those of ODHCs-IV (7.81 and 15.63 μg/mL), against C. albicans, S. pyogenes, and K. pneumonia. ODHCs-IV/CuONPs-5 % composite is safe on normal human cells. Oxalyl dihydrazide and CuONPs amalgamated into chitosan in one formulation promoted its antimicrobial efficiency.

A comprehensive review on crosslinked network systems of zinc oxide-organic polymer composites

In recent years, the synergistic crosslinked networks formed by zinc oxide (ZnO) particles and organic polymers have gained significant attention. This importance is ascribed due to the valuable combination of low band gap containing ZnO particles with responsive behavior containing organic polymers. These properties of both ZnO and organic polymers make a suitable system of crosslinked ZnO-organic polymer composite (CZOPC) for various applications in the fields of biomedicine, catalysis, and environmental perspectives. The literature extensively provided the diverse morphologies and structures of CZOPC, and these architectural structures play a crucial role in determining their efficiency across various applications. Consequently, the careful design of CZOPC shapes tailored to specific purposes has become a focal point. This comprehensive review provides insights into the classifications, synthetic approaches, characterizations, and applications of ZnO particles decorated in organic polymers with crosslinked network. The exploration extends to the adsorption, environmental, catalytic, and biomedical applications of ZnO-organic polymer composites. Adopting a tutorial approach, the review systematically investigates and elucidates the applications of CZOPC with a comprehensive understanding of their diverse capabilities and uses.

Suppress the cell growth of cancer stem-like cells (NTERA-2) using Sox2-Oct4 decoy oligodeoxynucleotide-encapsulated niosomes-zinc hybrid nanocarriers under X-irradiation

Sox2 and Oct4 dysregulations could significantly increase in the cancer stem cell (CSC) population in some cancer cells and resistance to common treatments. In this study, the synergistic effects of Sox2-Oct4 decoy oligodeoxynucleotides-encapsulated Niosomes-zinc hybrid nanocarriers along with X-irradiation conditions as a combinational therapy tool were investigated in the treatment of cancer-like stem cells (NTERA-2). The NTERA-2 cell line known as a cancer-like stem cell line was used in this investigation. Sox2-Oct4 decoy oligodeoxynucleotides were designed based on the sequence of the Sox2 promoter and synthesized. Physicochemical characteristics of ODNs-encapsulated niosomes-zinc hybrid nanocarriers (NISM@BSA-DEC-Zn) investigated with FT-IR, DLS, FESEM, and ODNs release kinetic estimation assays. Further investigations such as hemolysis, uptake, cell viability, apoptosis, cell cycle, and scratch repair tests were performed. All the above assays were completed with and without X-ray exposure conditions (fractionated 2Gy). Physicochemical characteristics results showed that the Niosomes-Zn nanocarriers were successfully synthesized. NISM@BSA-DEC-Zn was efficiently taken up by NTERA-2 cells and significantly inhibited cell growth, increased apoptosis, and reduced cell migration in both conditions (with and without X-ray exposure). Furthermore, NISM@BSA-DEC-Zn treatment resulted in G1 and G2/M cell cycle arrest without and with X-irradiation, respectively. The prepared nanocarrier system can be a promising tool for drug delivery in cancer treatment. Decoy ODN strategy along with zinc nanoparticles could increase the sensitivity of cancer cells toward irradiation, which has the potential for combinational cancer therapies.

Phytofabrication of biocompatible chitosan-based ZnO nanocomposite aided by Cissus quadrangularis extract enriched with antimicrobial and antioxidant potential

A dynamic chitosan-based ZnO nanocomposite (NC) was fabricated via a cost-effective formulation and an eco-friendly procedure utilizing Cissus quadrangularis (CQ) plant extract. This study investigates the antimicrobial and antioxidant properties, together with the cytocompatibility aspects of chitosan-incorporated ZnO nanocomposite (CS-ZnO/CQE). The formation and structural morphology of the nanocomposites were examined using FTIR, UV-Vis, XRD, XPS, BET, TGA, SEM, and TEM techniques. The antibacterial test results demonstrated the greatest inhibitory zone diameter against S. aureus (19 ± 1.00 mm) and E. coli (17 ± 1.05 mm), assessed through agar well diffusion method. Also, the composite exhibited a DPPH inhibition rate of 78.7 ± 0.34 %, indicating its high effectiveness in neutralizing free radicals. In addition, the nanocomposite exhibited less toxicity towards human erythrocytes, HDF and HEK-293 cells as a result of the biocompatibility exhibited by CS, ZnO, and CQ plant extract. Likewise, it has exceptional cell migratory capacity and possesses biodegradability factors. These observations strongly suggest the potential of CS-ZnO/CQE as a cutting-edge antibacterial and antioxidant agent to be implemented in the medical sector.

Green Synthesis of Zinc Oxide Nanoparticles from Althaea officinalis Flower Extract Coated with Chitosan for Potential Healing Effects on Diabetic Wounds by Inhibiting TNF-α and IL-6/IL-1β Signaling Pathways

Background

Diabetes Mellitus is a multisystem chronic pandemic, wound inflammation, and healing are still major issues for diabetic patients who may suffer from ulcers, gangrene, and other wounds from uncontrolled chronic hyperglycemia. Marshmallows or Althaea officinalis (A.O.) contain bioactive compounds such as flavonoids and phenolics that support wound healing via antioxidant, anti-inflammatory, and antibacterial properties. Our study aimed to develop a combination of eco-friendly formulations of green synthesis of ZnO-NPs by Althaea officinalis extract and further incorporate them into 2% chitosan (CS) gel.

Method and Results

First, develop eco-friendly green Zinc Oxide Nanoparticles (ZnO-NPs) and incorporate them into a 2% chitosan (CS) gel. In-vitro study performed by UV-visible spectrum analysis showed a sharp peak at 390 nm, and Energy-dispersive X-ray (EDX) spectrometry showed a peak of zinc and oxygen. Besides, Fourier transforms infrared (FTIR) was used to qualitatively validate biosynthesized ZnO-NPs, and transmission electron microscope (TEM) showed spherical nanoparticles with mean sizes of 76 nm and Zeta potential +30mV. The antibacterial potential of A.O.-ZnO-NPs-Cs was examined by the diffusion agar method against Gram-positive (Staphylococcus aureus and Bacillus subtilis) and Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Based on the zone of inhibition and minimal inhibitory indices (MIC). In addition, an in-silico study investigated the binding affinity of A.O. major components to the expected biological targets that may aid wound healing. Althaea Officinalis, A.O-ZnO-NPs group showed reduced downregulation of IL-6, IL-1β, and TNF-α and increased IL-10 levels compared to the control group signaling pathway expression levels confirming the improved anti-inflammatory effect of the self-assembly method. In-vivo study and histopathological analysis revealed the superiority of the nanoparticles in reducing signs of inflammation and wound incision in rat models.

Conclusion

These biocompatible green zinc oxide nanoparticles, by using Althaea Officinalis chitosan gel ensure an excellent new therapeutic approach for quickening diabetic wound healing.

Evaluation of the in vitro anti-inflammatory and anti-Helicobacter pylori activities of chitosan-based biomaterials modified with copper oxide nanoparticles

For chemical modification, p-aminobenzoic acid was incorporated into chitosan Schiff base (ACsSB) and chitosan (ACs). Two ACs-based CuO nanoparticles composites; ACs/CuONPs-1 % and ACs/CuONPs-5 %, were also synthesized. Their structures were emphasized utilizing several analytical techniques; elemental analysis, FTIR, 1H NMR, XRD, SEM, EDX and TEM. Compared with standard cyclooxygenase (COX) inhibitor, Celecoxib, the prepared biomaterials showed in vitro selective inhibitory effectiveness against COX-2 enzyme that could be sorted, according to their MIC values that produce 50 % inhibition of COX-2 enzyme activity, as follows: Celecoxib (0.28 μg/mL) > ACs/CuONPs-5 % (4.1 μg/mL) > ACs/CuONPs-1 % (14.8 μg/mL) > ACs (38.5 μg/mL) > ACsSB (58.9 μg/mL) > chitosan (>125 μg/mL). Further, ACs/CuONPs-5 % has more in vitro inhibition efficiency towards Helicobacter pylori (H. pylori) than the other prepared biomaterials. Interestingly, the MIC value of 100 % growth inhibition of H. pylori for ACs/CuONP-5 % is equal to that of drug Clarithromycin (1.95 μg/mL). Thus, ACs/CuONPs-5 % has a promising potential as anti-H. pylori and selective anti-inflammatory agent. ACs/CuONPs-5 % is safe on the human gastric normal cells (GES-1). Therefore, amalgamation of both p-aminobenzoic acid and CuONPs into chitosan extremely promoted its anti-inflammatory and anti-H. pylori activity. This is a promising approach to achieve methods successful to compete the conventional antibiotics.

Poly (Vinyl Alcohol) Hydrogels Boosted with Cross-Linked Chitosan and Silver Nanoparticles for Efficient Adsorption of Congo Red and Crystal Violet Dyes

In our previous work, three different weight ratios of chitosan/PVA (1:3, 1:1, and 3:1) were blended and then cross-linked with trimellitic anhydride isothiocyanate (TAI) at a concentration depending on their chitosan content, obtaining three hydrogels symbolized by H13, H11, and H31. Pure chitosan was cross-linked with TAI, producing a hydrogel symbolized by H10. Further, three H31-based silver nanoparticles composites (H31/AgNPs1%, H31/AgNPs3%, and H31/AgNPs5%) were also synthesized. They were investigated, for the first time in this study, as adsorbents for Congo Red (CR) and Crystal Violet (CV) dyes. The removal efficiency of CR dye increased with increasing H10 content in the hydrogels, and with increasing AgNP content in the composites, reaching 99.91% for H31/AgNPs5%. For CV dye, the removal efficiency increased with the increase in the PVA content. Furthermore, the removal efficiency of CV dye increased with an increasing AgNP content, reaching 94.7% for H31/AgNPs5%. The adsorption capacity increased with the increase in both the initial dye concentration and temperature, while with an increasing pH it increased in the case of CV dye and decreased in the case of CR dye. The adsorption of CV dye demonstrated that the Freundlich isotherm model is better suited for the experimental results. Moreover, the results were best fitted with pseudo-second-order kinetic model.