Antibacterial effect of 405±5nm light emitting diode illumination against Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella on the surface of fresh-cut mango and its influence on fruit quality

Illuminating the future of food microbial control: From optical tools to Optogenetic tools

Light as an environmental signal can effectively regulate various biological processes in microbial systems. Optical and optogenetic tools are able to utilize light for precise control methods with minimal interference. Recently, research on these tools has extended to the field of microbiology. Distinguishing from existing reviews, this review narrows the scope of application into food sector, focusing on advances in optical and optogenetic tools for microbial control, including optical tools targeting pathogenic or probiotic bacteria for non-thermal sterilization, antimicrobial photodynamic therapy, or photobiomodulation, combined with nanomaterials as photosensors for food analysis. As well as using optogenetic tools for more convenient and precise control in food production processes, covering reversible induction, metabolic flux regulation, biofilm formation, and inhibition. These tools offer new solutions to goals that cannot be achieved by traditional methods, and they are still maturing to explore other uses in the food field.

Novel Photodynamic Inactivation Strategy for Salmonella Enteritidis PT4 on Eggshells: Exploiting the Antimicrobial Potential of Curcumin and Carvacrol

Photodynamic inactivation (PDI) is a new and promising strategy for eliminating foodborne pathogenic bacteria in food preservation, reducing associated health risks for consumers. This study aimed to develop an innovative PDI-based system to inactivate Salmonella Enteritidis PT4 on eggshells. The system includes 405 nm light-emitting diodes (LEDs) and the application of curcumin or carvacrol as photosensitizers. The antibacterial activity of the system was investigated in eggshells inoculated with S. Enteritidis PT4 at different temperatures (4, 25, and 37°C) and exposure times (15, 30, and 45 min). Carvacrol + LEDs application was completely inhibited S. Enteritdis PT4 at 4 (after 30 min), 25, and 37°C at the 45th min. Curcumin + LED completely inhibited bacterial growth after 45 min at 4 and 25°C. The results showed that simultaneous use of carvacrol or curcumin with LEDs at various temperatures exhibited significant antibacterial activity against the bacteria depending on the exposure time. The application of curcumin or carvacrol sourced via PDI in the originally developed system resulted in any significant changes in egg quality parameters and sensory properties. This study demonstrated that PDI-based system using curcumin or carvacrol as photosensitizers could be a potential tool for decontamination of eggs contaminated with S. Enteritidis PT4.

Inactivation of Listeria monocytogenes, Escherichia coli O157:H7, and Staphylococcus aureus by sequential light-emitting diodes (LEDs) treatment at 365 nm and 420 nm

Frequent outbreaks caused by foodborne pathogens pose long-term risks to consumer health. To proactively reduce the load of pathogenic bacteria during food processing, a novel light-based antibacterial approach was developed by sequential application of 365 nm and 420 nm light-emitting diodes (LEDs). Results demonstrated that after treatment with 365 nm (480 J/cm2) followed by 420 nm (307.2 J/cm2), the reduction of Listeria monocytogenes reached 4.05 ± 0.31 log CFU/mL, significantly higher (an additional 1.8 log CFU/mL, P < 0.05) than cumulative reductions achieved by each 365 nm (2.25 ± 0.92 log CFU/mL) and 420 nm (0.02 ± 0.15 log CFU/mL) treatments. Further analysis revealed that the enhancement in bacterial reduction achieved through the sequential treatment with 365 nm and 420 nm was primarily driven by the exposure time to 365 nm. The inactivation mechanisms were investigated, considering possible photothermal, physical, and oxidative effects. Findings showed that the antibacterial effect of sequential treatment was mainly ascribed to intracellular oxidation generated by reactive oxidative species (ROS), namely hydrogen peroxide and superoxide anion. The antibacterial mechanism of two LEDs may result from the sensitization of bacterial cells to excessive ROS, as evidenced by fluorescent intensity measurements and chemical scavenger assays. This research provides new insight for improving the efficacy of UVA and blue light treatment to control food contamination by Listeria.

Improvement of Selected Quality and Safety Traits in Turmeric-Enriched Kale Pesto Using Blue Light and Sous-Vide

The potential of blue light (BL) and sous-vide (S-V) as a novel approach for food preservation was investigated via measurements of the total phenolic content (TPC), antioxidative activity, color, and their antibacterial effect on Listeria monocytogenes in two versions of laboratory-prepared kale pesto, with and without the addition of turmeric. The TPC ranged from 85 to 208 mg/100 g GAE d.m. and 57 to 171 mg/100 g GAE d.m., respectively. In both versions, the highest TPC was in the blue light-sous-vide samples, while the lowest was after the sous-vide, with a loss of polyphenols of almost 40% during storage when turmeric was absent. Antioxidative capabilities of the pesto were initially estimated at 54.07 and 7.46 µmol TE/g d.m., respectively, indicating significant bioactivity enhancement by turmeric. In turmeric-enriched pesto, sous-vide decreased the antioxidative activity levels by 12% in fresh pesto and by 45% during storage. Meanwhile, blue light compensated for the losses caused by the sous-vide treatment. Although the hue angle (h°) of sous-vide pesto was lower than that of blue light pesto in most samples, sequential BL and S-V ultimately yielded the lowest h°. The sequential BL and S-V treatment resulted in a 1.7 log reduction in the L. monocytogenes population, whereas adding turmeric increased the treatment efficacy by another 2.0 logs. Thus, as a source of photosensitizing molecules, turmeric was highly antibacterial after photothermal activation with blue light and sous-vide. This study suggests that blue light could be an effective (pre)treatment used on pesto sauces to preserve bioactivity and to improve safety when enriched with a natural additive like turmeric.

Radical species generating technologies for decontamination of Listeria species in food: a recent review report

Foodborne illnesses occur due to the contamination of fresh, frozen, or processed food products by some pathogens. Among several pathogens responsible for the illnesses, Listeria monocytogenes is one of the lethal bacteria that endangers public health. Several preexisting and novel technologies, especially non-thermal technologies are being studied for their antimicrobial effects, particularly toward L. monocytogenes. Some noteworthy emerging technologies include ultraviolet (UV) or light-emitting diode (LED), pulsed light, cold plasma, and ozonation. These technologies are gaining popularity since no heat is employed and undesirable deterioration of food quality, especially texture, and taste is devoided. This review aims to summarize the most recent advances in non-thermal processing technologies and their effect on inactivating L. monocytogenes in food products and on sanitizing packaging materials. These technologies use varying mechanisms, such as photoinactivation, photosensitization, disruption of bacterial membrane and cytoplasm, etc. This review can help food processing industries select the appropriate processing techniques for optimal benefits, in which the structural integrity of food can be preserved while simultaneously destroying L. monocytogenes present in foods. To eliminate Listeria spp., different technologies possess varying mechanisms such as rupturing the cell wall, formation of pyrimidine dimers in the DNA through photochemical effect, excitation of endogenous porphyrins by photosensitizers, generating reactive species, causing leakage of cellular contents and oxidizing proteins and lipids. These technologies provide an alternative to heat-based sterilization technologies and further development is still required to minimize the drawbacks associated with some technologies.

Optimization of the Erythrosine-mediated photodynamic therapy against Escherichia coli using response surface methodology

BACKGROUND

The efficacy of photodynamic therapy (PDT) depends on the combination of light and a photosensitizer for inactivation of microorganisms. However, finding the ideal conditions for the factors involved in this technique is time and cost-consuming. The rotational composite central design (RCCD) is a tool that can be allied with PDT to achieve precise results within a shorter working time.

METHODS

This study used the response surface methodology to optimize the parameters of PDT mediated by Erythrosine (ERY) and green light-emitting diodes (LED) in different Escherichia coli strains by applying RCCD.

RESULTS

The RCCD predicted optimum values of ERY and light exposure on PDT. According to the experimental results, the light exposure time showed the most significant influence on the inactivation of the evaluated bacteria. The optimized operating conditions were validated in laboratory tests, and no viable cells were recovered with ERY at 116 µmol L-1 and 30 min of light (33.34 J cm2) for E. coli ATCC 25922, 108 µmol L-1 and 40 min (44.38 J cm2) for E. coli ATCC 35218, and 108 µmol L-1 and 29.3 min (32.5 J cm2) for E. coli O157:H7 EDL 933.

CONCLUSION

The adjusted polynomial models provided accurate information on the combined effects of ERY and lighting time with green LED on PDT. The application of the RCCD, in addition to reducing the number of experiments, also allows for increased quantity and quality of the results. Therefore, surface response methodology combined with PDT is a promising approach to inactivate E. coli.

Combined antibacterial effect of 460 nm light-emitting diode illumination and chitosan against Escherichia coli O157:H7, Salmonella spp. and Listeria monocytogenes on fresh-cut melon, and the impact of combined treatment on fruit quality

This study evaluated the combined antibacterial effect of 460 nm LED illumination and chitosan on Escherichia coli O157:H7, Salmonella spp. and Listeria monocytogenes on fresh-cut melon surface and its impact on the quality of melon at a total dose of 2.4 kJ/cm2 at 4 and 10 °C. Results showed that the antibacterial effect of LED illumination in combination with chitosan (0.5 and 1.0%) was much better than that of LED illumination alone, showing their synergistic effect. Among the pathogens, L. monocytogenes was the most susceptible pathogen to LED illumination. Although the color of melons became paler after LED illumination, there was little to no change in ascorbic acid content, total flavonoid content, or antioxidant capacity of the illuminated fruits compared with non-illuminated fruits. Thus, these results suggest that chitosan-mediated 460 nm LED illumination could be applied to inactivate foodborne pathogens on fresh-cut melons during storage at food establishments.

An Approach to Improve Energy Efficiency during Antimicrobial Blue Light Inactivation: Application of Pulse-Width Modulation Dimming to Balance Irradiance and Irradiation Time

Antimicrobial blue light (aBL) is an effective non-destructive inactivation technique and has received increasing attention. Despite its significance, the existing research has not thoroughly delved into the impacts of irradiance and irradiation time on enhancing energy efficiency during aBL inactivation and the explanation of the enhancement effect of pulse exposure. In this paper, a series of Escherichia coli inactivation experiments with different duty cycles, pulse frequencies, and irradiation times were conducted, and the relative concentrations of reactive oxygen species (ROS) were measured under corresponding conditions. A two-dimensional (2-D) Hom model was proposed to evaluate the effect of irradiance and irradiation time. The results show that, compared to continuous exposure, pulsed aBL (duty cycle = 25%) can save ~37% of the energy to achieve the same inactivation effect and generate a 1.95 times higher ROS concentration. The 2-D Hom model obtains the optimal combination of average irradiance and time according to the desired reduction and shows that the irradiation time has a higher weight than the irradiance (1.677 and 1.083, respectively). Therefore, using pulse exposure with a lower average irradiance for a longer period of time can achieve a better inactivation effect when consuming equivalent energy. The proposed pulse-width modulation dimming approach helps promote the application of the aBL technique.

New trends in the development of photodynamic inactivation against planktonic microorganisms and their biofilms in food system

The photodynamic inactivation (PDI) is a novel and effective nonthermal inactivation technology. This review provides a comprehensive overview on the bactericidal ability of endogenous photosensitizers (PSs)-mediated and exogenous PSs-mediated PDI against planktonic bacteria and their biofilms, as well as fungi. In general, the PDI exhibited a broad-spectrum ability in inactivating planktonic bacteria and fungi, but its potency was usually weakened in vivo and for eradicating biofilms. On this basis, new strategies have been proposed to strengthen the PDI potency in food system, mainly including the physical and chemical modification of PSs, the combination of PDI with multiple adjuvants, adjusting the working conditions of PDI, improving the targeting ability of PSs, and the emerging aggregation-induced emission luminogens (AIEgens). Meanwhile, the mechanisms of PDI on eradicating mono-/mixed-species biofilms and preserving foods were also summarized. Notably, the PDI-mediated antimicrobial packaging film was proposed and introduced. This review gives a new insight to develop the potent PDI system to combat microbial contamination and hazard in food industry.

Chitosan enhances antibacterial efficacy of 405 nm light-emitting diode illumination against Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella spp. on fresh-cut melon

This study aimed to evaluate the influence of chitosan on the antibacterial efficacy of 405 nm LED illumination against Escherichia coli O157:H7, Salmonella spp., and Listeria monocytogenes on fresh-cut melons. The antibacterial efficacy of LED illumination (a total dose of 1.3 kJ/cm²) with or without chitosan (0.5 and 1.0 %) against these three pathogens was determined at 4 and 10 °C, respectively. Non-illuminated and chitosan-treated fruits were stored in the dark for 36 h under the same temperature. Color changes, ascorbic acid content, and total flavonoid content of illuminated and non-illuminated fruits were also analyzed. The results showed that the populations of all three pathogens on the non-illuminated and chitosan-treated fruits remained unchanged during storage. Regardless of bacterial species and chitosan concentrations, LED illumination in combination with chitosan greatly reduced the bacterial populations by 1.5 - 3.5 log/cm², which was greater than LED illumination alone. Among the three pathogens, L. monocytogenes was the most susceptible to chitosan-mediated LED illumination. However, the whiteness index of illuminated fruits significantly increased by 1.3-fold compared to that of non-illuminated fruits, regardless of the presence of chitosan. Unlike color, no significant difference was observed in ascorbic acid and total flavonoid contents between illuminated and non-illuminated fruits. Although the fruit color was changed by LED illumination, these results indicate that adding chitosan could enhance the antibacterial efficacy of 405 nm LED illumination against major foodborne pathogens on fresh-cut melons without changing nutritional quality.

Phototreatment (below 1100 nm) improving quality attributes of fresh-cut fruits and vegetables: A review

The emerging area of phototreatment technology has shown a significant potential to enhance the quality of fresh-cut fruit and vegetable products (FFVP). This review critically evaluates relevant literatures to address the potential for phototreatment technology (Red, blue, green, ultraviolet and pulsed light) applied to FFVP, outline the key to the success of phototreatment processing, and discuss the corresponding problems for phototreatment processing along with research and development needs. Base on photothermal, photophysical and photochemical process, phototreatment displays a great potential to maintain quality attributes of FFVP. The operating parameters of light, the surface properties and matrix components of the targeted material and the equipment design affect the quality of the fresh-cut products. To adapt current phototreatment technology to industrial FFVP processing, it is necessary to offset some limitations, especially control of harmful substances (For example, nitrite and furan) produced by phototreatment, comparison between different phototreatment technologies, and establishment of mathematical models/databases.

Antimicrobial curcumin-mediated photodynamic inactivation of bacteria in natural bovine casing

BACKGROUND

Outbreaks related to food contamination by resistant microorganisms is a worldwide concern that, motivates industries and research institutions to search for affordable solutions. Among the solutions that have been proposed, Photodynamic Inactivation (PDI) of microorganisms has gained prominence, among other aspects, because it is easy to apply and does not generate microbial resistance.

METHODS

In this study, we used the association between curcumin solubilized with Tween and light in the photodynamic inactivation process, using light-emitting diodes with a wavelength of 430 nm for decontamination S. Typhimurium and K. pneumoniae from bovine casings used as wrappers for meat products. The result was verified by counting and comparing the number of colony-forming units of the treatment concerning the negative control.

RESULTS

The solubilizer, Tween 80, used does not change the optical absorption of curcumin. An optical fluence of 150J/cm² induces a microbial log reduction of 3.8±0.2 and 2.7±0.1 for S. Typhimurium, and K. pneumoniae contaminated guts, respectively. For the 200μM concentration of curcumin, the PDI provided a microbial log reduction of 3.16±0.03 for S. Typhimurium. For K. pneumoniae, the minimal inhibitory concentration of curcumin occurs up to 12.5μM, causing an microbial log reduction of 2.08±0.03.

CONCLUSION

Both curcumin and tween are already used as additives in food production and do not pose health risks at the concentrations used. Furthermore, in the case of the material studied, the addition of curcumin favors the organoleptic quality associated with the color of the food, unlike the green or blue photossensitizers. The results pave the way for possible application of curcumin in finished meat products.

Efficacy of 405 nm Light-Emitting Diode Illumination and Citral Used Alone and in Combination for Inactivation of Vibrio parahaemolyticus on Shrimp

Vibrio parahaemolyticus is a widely distributed pathogen, which is frequently the lead cause of infections related to seafood consumption. The objective of the present study was to investigate the antimicrobial effect of the combination of 405 nm light-emitting diode (LED) and citral on V. parahaemolyticus. The antimicrobial effect of LED illumination and citral was evaluated on V. parahaemolyticus not only in phosphate-buffered saline (PBS) but also on shrimp. Quality changes of shrimp were determined by sensory evaluation. Changes in bacteria cell membrane morphology, cell membrane permeability, cell lipid oxidation level, and DNA degradation were examined to provide insights into the antimicrobial mechanism. The combination of LED treatments and citral had better antimicrobial effects than either treatment alone. LED combined with 0.1 mg/mL of citral effectively reduced V. parahaemolyticus from 6.5 log CFU/mL to below the detection limit in PBS. Combined treatment caused a 3.5 log reduction of the pathogen on shrimp within 20 min and a 6 log reduction within 2 h without significant changes in the sensory score. Furthermore, combined LED and citral treatment affected V. parahaemolyticus cellular morphology and outer membrane integrity. The profile of the comet assay and DNA fragmentation analysis revealed that combination treatment did not cause a breakdown of bacterial genomic DNA. In conclusion, LED may act synergistically with citral. They have the potential to be developed as novel microbial intervention strategies.

Inactivation of Shigella flexneri by 405-nm Light-Emitting Diode Treatment and Possible Mechanism of Action

Shigella flexneri, a common Gram-negative foodborne pathogen, is widely distributed in fresh-cut fruits and vegetables, unpasteurized milk, and food processing environments. The aims of this study were to evaluate the antibacterial effects of 405-nm light-emitting diode (LED) treatment on S. flexneri and to investigate the possible mechanism. The results showed that LED irradiation (360 min) reduced the number of S. flexneri in phosphate-buffered saline by 3.29 log colony-forming unit (CFU)/mL (initial bacterial count: 6.81 log CFU/mL). The cells in reconstituted infant formula, cells on fresh-cut carrot slices, and biofilm-associated cells on stainless steel surfaces were reduced by 1.83 log CFU/mL, 7.00 log CFU/cm², and 4.35 log CFU/cm² following LED treatment for 360, 120, and 120 min, respectively. LED treatment damaged both DNA and cell wall of S. flexneri and changed cell morphology and cell membrane permeability. In addition, LED treatment decreased total cell protein concentration of S. flexneri. These results indicated that 405-nm LED treatment effectively controlled S. flexneri contamination of foods and food contact surfaces and that the bacterial inactivation may be the result of damage to multiple cellular components. These findings highlight the potential of LED technology in controlling S. flexneri during food processing, storage, and preparation.

A review on recent advances in LED-based non-thermal technique for food safety: current applications and future trends

Light-emitting diodes (LEDs) is an eco-friendly light source with broad-spectrum antimicrobial activity. Recent studies have extensively been conducted to evaluate its efficacy in microbiological safety and the potential as a preservation method to extend the shelf-life of foods. This review aims to present the latest update of recent studies on the basics (physical, biochemical and mechanical basics) and antimicrobial activity of LEDs, as well as its application in the food industry. The highlight will be focused on the effects of LEDs on different types (bacteria, yeast/molds, viruses) and forms (planktonic cells, biofilms, endospores, fungal toxin) of microorganisms. The antimicrobial activity of LEDs on various food matrices was also evaluated, together with further analysis on the food-related factors that lead to the differences in LEDs efficiency. Besides, the applications of LEDs on the food-related conditions, packaged food, and equipment that could enhance LEDs efficiency were discussed to explore the future trends of LEDs technology in the food industry. Overall, the present review provides important insights for future research and the application of LEDs in the food industry.

Effects of curcumin-mediated photodynamic treatment on lipid degradation of oysters during refrigerated storage

BACKGROUND

Oyster's lipid degradation leads to a decrease in edible and nutritional value. Curcumin-mediated photodynamic treatment (PDT) is an innovative non-thermal technology, although evaluation of the oyster's lipid degradation has been scarce. In the present study, we investigated peroxide value, thiobarbituric acid reactive substance, triacylglycerol and free fatty acids to evaluate the effect of curcumin-mediated PDT on lipid degradation of oysters during refrigerated storage.

RESULTS

The results showed that curcumin-mediated PDT could delay oyster's lipid degradation. Next, the activities of enzymes were detected to determine the mechanisms behind the effects of curcumin-mediated PDT. It was revealed that the activities of lipase, phospholipase A₂ (PLA₂ ), phospholipase C (PLC), phospholipase D (PLD) and lipoxygenase (LOX) were significantly inhibited after curcumin-mediated PDT (P < 0.05). Furthermore, 16 s rRNA analysis established that the relative abundances of Pseudoalteromonas and Psychrilyobacter were reduced by 51.58% and 43.82%, respectively, after curcumin-mediated PDT.

CONCLUSION

Curcumin-mediated PDT could delay oyster's lipid degradation by inhibiting the activities of lipase, PLA₂ , PLC, PLD and LOX, as well as by changing the oyster's microbial composition, reducing the relative abundance of Pseudoalteromonas and Psychrilyobacter. © 2021 Society of Chemical Industry.

Application of light emitting diodes (LEDs) for food preservation, post-harvest losses and production of bioactive compounds: a review

Light-emitting diode (LED) technology is a new non-thermal food preservation method that works by converting light energy into heat. LED has potential to revolutionize crop production, protection and preservation. This technology is economical and environmentally friendly. LEDs have been shown to improve the nutritive quality and shelf life of foods, control the ripening of fruits, induce the synthesis of bioactive compounds and antioxidants and reduce the microbial contamination. This technology also has great scope in countries, where safety, hygiene, storage and distribution of foods are serious issues. While comparing this technology with other lighting technologies, LEDs can bring numerous advantages to food supply chain from farm to fork. In case of small growing amenities which exploit only LEDs, energy expenditure has been successfully reduced while producing nutritious food. LEDs can be used to give us better understanding and control over production and preservation of food with relation to spectral composition of light. LEDs also play significant role in food safety by inactivating the food borne pathogens. Therefore, LED lighting is a very effective and promising technology for extending shelf life of agricultural produce by increasing disease resistance and with increased nutritional values.

Graphical abstract

Metabolic Effects of Violet Light on Spoilage Bacteria from Fresh-Cut Pakchoi during Postharvest Stage

Pakchoi (Brassica rapa L. Chinensis) is an important vegetable in Asia. Pseudomonas palleroniana is one of the specific spoilage organisms (SSOs) of fresh-cut pakchoi. The purpose of this study was to investigate changes to the endogenous metabolic spectrum of violet light (405 nm) with regard to food spoilage bacteria from fresh-cut pakchoi using ultrahigh-performance liquid chromatography-tandem mass spectrometry. In this study, P. palleroniana samples were treated with violet light at 4 °C, and the maximum dose was 133.63 J/cm². The results revealed that 153 metabolites and 83 pathways significantly changed compared to the control group, which indicated that light treatment may lead to ROS accumulation in cells, inducing oxidative stress and the excessive consumption of ATP. However, the increased content of aromatic amino acids and the decreased anabolism of some amino acids and nucleotides might be a form of self-protection by reducing energy consumption, thus contributing to the improvement of the tolerance of cells to illumination. These results provide new insights into the antibacterial mechanism of P. palleroniana with regard to metabolism.

Influence of temperature and relative humidity on the antifungal effect of 405 nm LEDs against Botrytis cinerea and Rhizopus stolonifer and their inactivation on strawberries and tomatoes

In recent years, photodynamic inactivation (PDI) has emerged as a promising preservation method to complement refrigeration in the fresh produce supply chain. However, due to infrastructural limitations in the supply chain, fresh produce is often exposed to environmental conditions rather than recommended storage conditions. Hence, this study aimed to investigate the influence of two important environmental variables in the fresh produce supply chain - temperature and relative humidity (RH), on the PDI of fruit spoilage molds. It also aimed to demonstrate proof-of-concept of their inactivation on fruit surfaces. In the in vitro stage, Botrytis cinerea and Rhizopus stolonifer, the two molds selected for this study, were illuminated with 405 nm LEDs on Dichloran Rose-Bengal Chloramphenicol (DRBC) agar at three levels of temperature (7, 16 and 25 °C) and relative humidity (40, 60 and 80%). Illumination under these conditions caused reductions greater than 94% in the mold populations, at all temperatures and relative humidities. Even so, a temperature of 25 °C was observed to be marginally better for the inactivation as compared to 7 and 16 °C, as it necessitated the lowest dose (6-7 kJ) for the first log reduction of both the molds. Similarly, an RH of 40% worked slightly better for the inactivation of B. cinerea, as it induced inactivation without any lag phase and required the lowest dose (8.03 kJ) for the first log reduction. When the antifungal effect was investigated on fruit surfaces, it was discovered that the illumination reduced the populations of B. cinerea and R. stolonifer on strawberries by 67% and 19%, whereas on tomatoes, the respective inactivations were 79% and 70% respectively. These results demonstrate further promise of PDI as a postharvest technology for reducing the risk of fruit spoilage. This study is also the first to demonstrate the potential of PDI to add value to supply chains where compliance to ideal storage conditions is not feasible.

Pathogenicity and virulence of Listeria monocytogenes: A trip from environmental to medical microbiology

Listeria monocytogenes is a saprophytic gram-positive bacterium, and an opportunistic foodborne pathogen that can produce listeriosis in humans and animals. It has evolved an exceptional ability to adapt to stress conditions encountered in different environments, resulting in a ubiquitous distribution. Because some food preservation methods and disinfection protocols in food-processing environments cannot efficiently prevent contaminations, L. monocytogenes constitutes a threat to human health and a challenge to food safety. In the host, Listeria colonizes the gastrointestinal tract, crosses the intestinal barrier, and disseminates through the blood to target organs. In immunocompromised individuals, the elderly, and pregnant women, the pathogen can cross the blood-brain and placental barriers, leading to neurolisteriosis and materno-fetal listeriosis. Molecular and cell biology studies of infection have proven L. monocytogenes to be a versatile pathogen that deploys unique strategies to invade different cell types, survive and move inside the eukaryotic host cell, and spread from cell to cell. Here, we present the multifaceted Listeria life cycle from a comprehensive perspective. We discuss genetic features of pathogenic Listeria species, analyze factors involved in food contamination, and review bacterial strategies to tolerate stresses encountered both during food processing and along the host's gastrointestinal tract. Then we dissect host-pathogen interactions underlying listerial pathogenesis in mammals from a cell biology and systemic point of view. Finally, we summarize the epidemiology, pathophysiology, and clinical features of listeriosis in humans and animals. This work aims to gather information from different fields crucial for a comprehensive understanding of the pathogenesis of L. monocytogenes.

New Trends in Photodynamic Inactivation (PDI) Combating Biofilms in the Food Industry-A Review

Biofilms cause problems in the food industry due to their persistence and incompetent hygiene processing technologies. Interest in photodynamic inactivation (PDI) for combating biofilms has increased in recent years. This technique can induce microbial cell death, reduce cell attachment, ruin biofilm biomolecules and eradicate structured biofilms without inducing microbial resistance. This review addresses microbial challenges posed by biofilms in food environments and highlights the advantages of PDI in preventing and eradicating microbial biofilm communities. Current findings of the antibiofilm efficiencies of this technique are summarized. Additionally, emphasis is given to its potential mechanisms and factors capable of influencing biofilm communities, as well as promising hurdle strategies.

Photodynamic inactivation and its application in food preservation

Food incidents caused by various foodborne pathogenic bacteria are posing a major threat to human health. The traditional thermal and chemical-based procedures applied for microbial control in the food industry cause adverse effects on food quality and bacterial resistance. As a new means of innovative sterilization technology, photodynamic inactivation (PDI) has gained significant attention due to excellent sterilization effect, environmental friendliness, safety, and low cost. This review analyses new developments in recent years for PDI systems applied to the food preservation. The fundamentals of photosensitization mechanism, the development of photosensitizers and light source selection are discussed. The application of PDI in food preservation are presented, with the main emphasis on the natural photosensitizers and its application to inactivate in vitro and in vivo microorganisms in food matrixes such as fresh vegetable, fruits, seafood, and poultry. The challenges and future research directions facing the application of this technology to food systems have been proposed. This review will provide reference for combating microbial contamination in food industry.

Assessing the photodynamic efficacy of different photosensitizer-light treatments against foodborne bacteria based on the number of absorbed photons

Increasing interests in photodynamic treatment (PDT) for food preservation require a holistic method to evaluate and compare different photosensitizer (PS)-light treatments. In this report, the absorbed photons were used as the basis to assess the antimicrobial photodynamic efficacy of two PSs, chlorophyllin sodium magnesium salt (Chl-Mg) and chlorophyllin sodium copper salt (Chl-Cu), under blue and white light against two typical foodborne pathogens, Gram-negative Escherichia coli, and Gram-positive Staphylococcus aureus. The results showed that the phototoxicity of a PS was predominantly decided by the absorbed photons rather than the characteristics of light sources. Photosensitized Chl-Mg exhibited superior antimicrobial activity as compared to that of ChlCu. The applied treatments were found to be more effective against S. aureus than E. coli. Bacterial inactivation kinetics as a function of the number of absorbed photons could be described by Weibull model with R² from 0.947-0.962, and kinetics constants D in the range of 0.202 × 10¹⁷ photons/cm²-2.409 × 10¹⁸ photons/cm². The kinetics models may find promising applications in the design, assessment, and optimization of PDT processes.

Investigating the Use of Ultraviolet Light Emitting Diodes (UV-LEDs) for the Inactivation of Bacteria in Powdered Food Ingredients

The addition of contaminated powdered spices and seasonings to finished products which do not undergo further processing represents a significant concern for food manufacturers. To reduce the incidence of bacterial contamination, seasoning ingredients should be subjected to a decontamination process. Ultraviolet light emitting diodes (UV-LEDs) have been suggested as an alternative to UV lamps for reducing the microbial load of foods, due to their increasing efficiency, robustness and decreasing cost. In this study, we investigated the efficacy of UV-LED devices for the inactivation of four bacteria (Listeria monocytogenes, Escherichia coli, Bacillus subtilis and Salmonella Typhimurium) on a plastic surface and in four powdered seasoning ingredients (onion powder, garlic powder, cheese and onion powder and chilli powder). Surface inactivation experiments with UV mercury lamps, UVC-LEDs and UVA-LEDs emitting at wavelengths of 254 nm, 270 nm and 365 nm, respectively, revealed that treatment with UVC-LEDs were comparable to, or better than those observed using the mercury lamp. Bacterial reductions in the seasoning powders with UVC-LEDs were less than in the surface inactivation experiments, but significant reductions of 0.75-3 log10 colony forming units (CFU) were obtained following longer (40 s) UVC-LED exposure times. Inactivation kinetics were generally nonlinear, and a comparison of the predictive models highlighted that microbial inactivation was dependent on the combination of powder and microorganism. This study is the first to report on the efficacy of UV-LEDs for the inactivation of several different bacterial species in a variety of powdered ingredients, highlighting the potential of the technology as an alternative to the traditional UV lamps used in the food industry.

Antimicrobial activity of 405 nm light-emitting diode (LED) in the presence of riboflavin against Listeria monocytogenes on the surface of smoked salmon

This study investigated the antimicrobial activity of 405 nm light-emitting diode (LED) with and without riboflavin against Listeria monocytogenes in phosphate buffered saline (PBS) and on smoked salmon at different storage temperatures and evaluated its impact on food quality. The results show that riboflavin-mediated LED illumination in PBS 25 °C significantly inactivated L. monocytogenes cells by 6.2 log CFU/mL at 19.2 J/cm², while illumination alone reduced 1.9 log CFU/mL of L. monocytogenes populations at 57.6 J/cm². L. monocytogenes populations on illuminated smoked salmon decreased by 1.0-2.2 log CFU/cm² at 1.27-2.76 kJ/cm² at 4, 12, and 25 °C, regardless of the presence of riboflavin. Although illumination with and without riboflavin caused the lipid peroxidation and color change in smoked salmon, this study demonstrates the potential of a 405 nm LED to preserve the smoked salmon products, reducing the risk of listeriosis.

Preparation of a Porphyrin Metal-Organic Framework with Desirable Photodynamic Antimicrobial Activity for Sustainable Plant Disease Management

Considering the severity of plant pathogen resistance toward commonly used agricultural microbicides, as well as the potential threats of agrichemicals to the eco-environment, there is a pressing need for antimicrobial approaches that are capable of inactivating pathogens efficiently without the risk of inducing resistances and harm. In this work, a porphyrin metal-organic framework (MOF) nanocomposite was constructed by incorporating 5,10,15,20-tetrakis(1-methyl-4-pyridinio)porphyrin tetra(p-toluenesulfonate) (TMPyP) as a photosensitizer (PS) in the cage of a variant MOF (HKUST-1) to efficiently produce singlet oxygen (¹O₂) to inactivate plant pathogens under light irradiation. The results showed that the prepared PS@MOF had a loading rate of PS about 12% (w/w) and excellent and broad-spectrum photodynamic antimicrobial activity in vitro against three plant pathogenic fungi and two pathogenic bacteria. Moreover, PS@MOF showed outstanding control efficacy against Sclerotinia sclerotiorum on cucumber in the pot experiment. Allium cepa chromosome aberration assays and safety evaluation on cucumber and Chinese cabbage indicated that PS@MOF had no genotoxicity and was safe to plants. Thus, porphyrin MOF demonstrated a great potential as an alternative and efficient new microbicide for sustainable plant disease management.

Efficacy of light-emitting diodes emitting 395, 405, 415, and 425 nm blue light for bacterial inactivation and the microbicidal mechanism

We investigated the bactericidal effects against Escherichia coli O157:H7 of light-emitting diodes (LEDs) emitting blue light of four different peak wavelengths ranging from 395 to 425 nm in water. Furthermore, we investigated inactivation in the presence of reactive oxygen species (ROS) scavengers to elucidate the contribution of bacterial inactivation. An aluminum chamber was constructed and coated in carbon to block exterior light, and a single blue light LED with a rear heat sink was attached to the chamber lid. Effective inactivation of the pathogen was observed for all blue light LED irradiation at 305, 405, 415, and 425 nm. The log-linear with shoulder and tail model and log-linear model described the survival of the bacteria after blue light LED treatments. Not just the effects of ROS but also photophysical effects were shown with the addition of mannitol, a ROS scavenger. The integrity of the cell membrane was damaged regardless of the presence of ROS, which indicates that photophysical effects were sufficient to induce damage to the cell membrane. In addition, activity of succinate-coenzyme Q reductase, which participates in respiratory metabolism to generate energy, decreased in the absence of ROS and decreased further in the presence of ROS.

Antimicrobial Blue Light versus Pathogenic Bacteria: Mechanism, Application in the Food Industry, Hurdle Technologies and Potential Resistance

Blue light primarily exhibits antimicrobial activity through the activation of endogenous photosensitizers, which leads to the formation of reactive oxygen species that attack components of bacterial cells. Current data show that blue light is innocuous on the skin, but may inflict photo-damage to the eyes. Laboratory measurements indicate that antimicrobial blue light has minimal effects on the sensorial and nutritional properties of foods, although future research using human panels is required to ascertain these findings. Food properties also affect the efficacy of antimicrobial blue light, with attenuation or enhancement of the bactericidal activity observed in the presence of absorptive materials (for example, proteins on meats) or photosensitizers (for example, riboflavin in milk), respectively. Blue light can also be coupled with other treatments, such as polyphenols, essential oils and organic acids. While complete resistance to blue light has not been reported, isolated evidence suggests that bacterial tolerance to blue light may occur over time, especially through gene mutations, although at a slower rate than antibiotic resistance. Future studies can aim at characterizing the amount and type of intracellular photosensitizers across bacterial species and at assessing the oxygen-independent mechanism of blue light-for example, the inactivation of spoilage bacteria in vacuum-packed meats.

Red Light Exposure Delays Appearance and Aroma Deterioration of Fresh-Cut Watermelon during Retail Display

Appearance and aroma deterioration are the main concerns during the retail display of fresh-cut watermelons. Here, fresh-cut watermelons were exposed to the red, green, blue, and conventional white light at 4°C for 4 days, respectively, and their resulting qualities were compared with the conventional white light as the control. Specifically, the red light presented its maximum emissions in 620–650 nm with a purity of 100% and an intensity of 1104.7 lux. The red light exposure reduced the weight loss to 1.81%, which was reduced by 51.1% of the control. The red light exposure reduced the color difference of the fruit surface significantly as well as maintaining its redness. The water-soaking ratio of the red light exposure was also reduced by 62.8% of the control. Moreover, the red light exposure delayed the aroma deterioration, which resulted from both microbial metabolism and the self-metabolism of volatiles of the fresh-cut watermelon. In summary, the red light exposure was better to delay the appearance and aroma deterioration of fresh-cut watermelons than the conventional white light during their retail display.

Synergistic effects of blue light-emitting diodes in combination with antimicrobials against Escherichia coli O157:H7 and their mode of action

This study was conducted to evaluate the antibacterial effect of 460-470 nm light-emitting diodes illumination (460/470 LED) combined with various antimicrobials at inactivating Escherichia coli O157:H7 and identify the antibacterial mechanisms. When carvacrol, thymol, citric acid, malic acid, citrus fruit extract, 3% NaCl, or 5% NaCl was combined with 460/470 LED, there was a higher reduction in E. coli O157:H7 compared to 460/470 LED treatment or antimicrobials alone at 4 °C. Particularly, a marked synergistic effect (>8.74 log₁₀ CFU/ml) was observed when 460/470 LED was combined with carvacrol, malic acid, citrus fruit extract, or 3% NaCl. Levels of intracellular ROS and lipid peroxidation of E. coli O157:H7 were higher in the combination of 460/470 LED and antimicrobials compared to individual treatments. Moreover, the combination treatment increased depolarization of the cell membrane leading to membrane damage as well as the loss of DNA integrity. Thus, adding antimicrobial treatment to 460/470 LED could improve its efficacy against pathogenic bacteria such as E. coli O157:H7.

Antimicrobial photodynamic treatment as an alternative approach for Alicyclobacillus acidoterrestris inactivation

Alicyclobacillus acidoterrestris is a cause of major concern for the orange juice industry due to its thermal and chemical resistance, as well as its spoilage potential. A. acidoterrestris spoilage of orange juice is due to off-flavor taints from guaiacol production and some halophenols. The present study aimed to evaluate the effectiveness of antimicrobial Photodynamic Treatment (aPDT) as an emerging technology to inactivate the spores of A. acidoterrestris. The aPDT efficiency towards A. acidoterrestris was evaluated using as photosensitizers the tetracationic porphyrin (Tetra-Py⁺-Me) and the phenothiazinium dye new methylene blue (NMB) in combination with white light-emitting diode (LED; 400-740 nm; 65-140 mW/cm²). The spores of A. acidoterrestris were cultured on YSG agar plates (pH 3.7 ± 0.1) at 45 °C for 28 days and submitted to the aPDT with Tetra-Py⁺-Me and NMB at 10 μM in phosphate-buffered saline (PBS) in combination with white light (140 mW/cm²). The use of Tetra-Py⁺-Me at 10 μM resulted in a 7.3 ± 0.04 log reduction of the viability of A. acidoterrestris spores. No reductions in the viability of this bacterium were observed with NMB at 10 μM. Then, the aPDT with Tetra-Py⁺-Me and NMB at 10 μM in orange juice (UHT; pH 3.9; 11°Brix) alone and combined with potassium iodide (KI) was evaluated. The presence of KI was able to potentiate the aPDT process in orange juice, promoting the inactivation of 5 log CFU/mL of A. acidoterrestris spores after 10 h of white light exposition (140 mW/cm²). However, in the absence of KI, both photosensitizers did not promote a significant reduction in the spore viability. The inactivation of A. acidoterrestris spores artificially inoculated in orange peels (10⁵ spores/mL) was also assessed using Tetra-Py⁺-Me at 10 and 50 μM in the presence and absence of KI in combination with white light (65 mW/cm²). No significant reductions were observed (p < .05) when Tetra-Py⁺-Me was used at 10 μM, however at the highest concentration (50 μM) a significant spore reduction (≈ 2.8 log CFU/mL reductions) in orange peels was observed after 6 h of sunlight exposition (65 mW/cm²). Although the color, total phenolic content (TPC), and antioxidant capacity of orange juice and peel (only color evaluation) seem to have been affected by light exposition, the impact on the visual and nutritional characteristics of the products remains inconclusive so far. Besides that, the results found suggest that aPDT can be a potential method for the reduction of A. acidoterrestris spores on orange groves.

Perspectives of photodynamic therapy in biotechnology

Photodynamic therapy (PDT) is a current and innovative technique that can be applied in different areas, such as medical, biotechnological, veterinary, among others, both for the treatment of different pathologies, as well as for diagnosis. It is based on the action of light to activate photosensitizers that will perform their activity on target tissues, presenting high sensitivity and less adverse effects. Therefore, knowing that biotechnology aims to use processes to develop products aimed at improving the quality of life of human and the environment, and optimizing therapeutic actions, researchers have been used PDT as a tool of choice. This review aims to identify the impacts and perspectives and challenges of PDT in different areas of biotechnology, such as health and agriculture and oncology. Our search demonstrated that PDT has an important impact around oncology, minimizing the adverse effects and resistance to chemotherapeutic to the current treatments available for cancer. Veterinary medicine is another area with continuous interest in this therapy, since studies have shown promising results for the treatment of different animal pathologies such as Bovine mastitis, Malassezia, cutaneous hemangiosarcoma, among others. In agriculture, PDT has been used, for example, to remove traces of antibiotics of milk. The challenges, in general, of PDT in the field of biotechnology are mainly the development of effective and non-toxic or less toxic photosensitizers for humans, animals and plants. We believe that there is a current and future potential for PDT in different fields of biotechnology due to the existing demand.

Antimicrobial photodynamic efficacy of selected natural photosensitizers against food pathogens: Impacts and interrelationship of process parameters

Photodynamic treatment (PDT) could be a viable option to decontaminate food or food contact surfaces. Such applications require a rigorous method to assess the efficacy of different photosensitizer-light source systems. It is also essential to determine suitable treatment conditions to achieve desirable microbial inhibition for a given process. In this connection, we evaluated and compared the antimicrobial activity of two natural photosensitizers (aloe emodin, curcumin) under PDT based on the number of absorbed photons. The degree of bacterial inactivation was then correlated to the absorbed photons as well as the process parameters through kinetics study. The results showed that aloe emodin was more effective than curcumin against both S. aureus and E. coli when the number of absorbed photons was matched. Aloe emodin reduced about 2.3 log units of S. aureus and 1.1 log units of E. coli more than curcumin. E. coli was more resistant to PDT than S. aureus. Inactivation kinetics of S. aureus and E. coli as a function of the number of absorbed photons can be described by the Weibull model with D values of 1.296 × 10¹⁷ photons/cm² and 2.446 × 10¹⁸ photons/cm², R² of 0.969 and 0.968, respectively. The interrelationship between the concentration of photosensitizer, radiant fluence, and degree of bacterial inactivation could be used to determine and optimize treatment conditions of PDT processes.