Dexamethasone-loaded poly(ɛ-caprolactone)/silica nanoparticles composites prepared by supercritical CO2 foaming/mixing and deposition

Technical development and application of supercritical CO2 foaming technology in PCL foam production

Polycaprolactone (PCL) has the advantages of good biocompatibility, appropriate biodegradability, non-toxicity, flexibility, and processability. As a result, PCL-based foams can successfully work in bone tissue engineering, medical patches, drug delivery, reinforcing materials, and other applications. A promising technology for producing PCL foam products is supercritical CO2 (ScCO2) foaming technology, which avoids using organic solvents, is green, and has low foaming agent costs. However, due to the limitations of ScCO2 foaming technology, it is no longer possible to use this technology alone to meet current production requirements. Therefore, ScCO2 foaming technology must combine with other technologies to develop PCL foam products with better performance and matching requirements. This paper systematically reviews the technological development of ScCO2 foaming in producing PCL foams. The molding process of ScCO2 foaming and the conventional preparation process of PCL foam products are discussed comprehensively, including the preparation process, advantages, and disadvantages, challenges faced, etc. Six combined technologies for ScCO2 foaming in the production of PCL foams and the applications of PCL foams are presented. Finally, the future remaining research for producing PCL foams by ScCO2 foaming is analyzed.

Intravitreal implants manufactured by supercritical foaming for treating retinal diseases

Chronic retinal diseases, such as age-related macular degeneration (AMD), are a major cause of global visual impairment. However, current treatment methods involving repetitive intravitreal injections pose financial and health burdens for patients. The development of controlled drug release systems, particularly for biological drugs, is still an unmet need in prolonging drug release within the vitreous chamber. To address this, green supercritical carbon dioxide (scCO2) foaming technology was employed to manufacture porous poly(lactic-co-glycolic acid) (PLGA)-based intravitreal implants loaded with dexamethasone. The desired implant dimensions were achieved through 3D printing of customised moulds. By varying the depressurisation rates during the foaming process, implants with different porosities and dexamethasone release rates were successfully obtained. These implants demonstrated controlled drug release for up to four months, surpassing the performance of previously developed implants. In view of the positive results obtained, a pilot study was conducted using the monoclonal antibody bevacizumab to explore the feasibility of this technology for preparing intraocular implants loaded with biologic drug molecules. Overall, this study presents a greener and more sustainable alternative to conventional implant manufacturing techniques, particularly suited for drugs that are susceptible to degradation under harsh conditions.

Research Progress of Design Drugs and Composite Biomaterials in Bone Tissue Engineering

Bone, like most organs, has the ability to heal naturally and can be repaired slowly when it is slightly injured. However, in the case of bone defects caused by diseases or large shocks, surgical intervention and treatment of bone substitutes are needed, and drugs are actively matched to promote osteogenesis or prevent infection. Oral administration or injection for systemic therapy is a common way of administration in clinic, although it is not suitable for the long treatment cycle of bone tissue, and the drugs cannot exert the greatest effect or even produce toxic and side effects. In order to solve this problem, the structure or carrier simulating natural bone tissue is constructed to control the loading or release of the preparation with osteogenic potential, thus accelerating the repair of bone defect. Bioactive materials provide potential advantages for bone tissue regeneration, such as physical support, cell coverage and growth factors. In this review, we discuss the application of bone scaffolds with different structural characteristics made of polymers, ceramics and other composite materials in bone regeneration engineering and drug release, and look forward to its prospect.

Preparation of porous PCL-PEG-PCL scaffolds using supercritical carbon dioxide

In this study, the Supercritical Carbon Dioxide (scCO₂) gas foaming procedure was used in the preparation of scaffolds containing the model drug dexamethasone (DXMT). The method used did not include an organic solvent thus making it a safe method. The ring-opening polymerization of PCL-PEG-PCL (PCEC) triblock was conducted using an organocatalyst [1,8 diazabicyclo [5.4.0] undec-7-ene (DBU)]. After mixing 5.0 g of DXMT with 50.0 g of PCEC, hydraulic pressure was applied to compress the mixed powder into disc-like tablets. The tablet-like scaffold of the triblock containing DXMT was inserted into a scCO₂ gas-foaming device. The peak porosity percentage of the synthesized triblock was found to be 55.58 %. Pressure, temperature, soaking time and the time required to depressurize were recorded as 198 bar, 50 °C, 2.0 h, and 28 min respectively. After treatment with scCO₂, the scaffolds experienced an almost full release of DXMT in vitro after 30 days (83.74 ± 1.54 % vs 52.24 ± 2.03 % before scCO₂ treatment). In conclusion, the results proved that the scCO₂ gas foaming procedure could be employed for constructing modifiable PCEC scaffolds with plausible porosity and structural and morphological features which can manipulate drug release.

Preparation and Biocompatibility of Core-Shell Microspheres for Sequential, Sustained Release of BMP-2 and VEGF

Bone defect repair remains a challenge in orthopedics. This study describes the development and potential effectiveness of vascular endothelial growth factor (VEGF)/bone morphogenetic protein-2 (BMP-2) shell-core microspheres for promoting bone regeneration. Poly(L-lactic acid)/polylactic-co-glycolic acid (PLLA/PLGA) core-shell microspheres loaded with VEGF and BMP-2 were prepared by a coaxial electrospray technique, and their surface morphology, core-shell distribution, and particle size were examined. Different groups of microspheres were prepared with different placement of the growth factors, and the encapsulation efficiency and in vitro release curves were measured. Additionally, the effects of the different groups of microspheres on the proliferation and differentiation of osteoblasts and vascular endothelial cells were investigated. The prepared microspheres had a core-shell structure with good homogeneity and dispersion, a clear boundary, and a smooth surface. On scanning electron microscopy, the mean diameter of the microspheres was similar for all six preparations (P > 0.05). During in vitro release, growth factor was initially released via a brief burst release from the outer shell of the microsphere followed by a slower sustained release. The release of growth factors from the inner core remained relatively slow and sustained. Sequential release of different growth factors was achieved through the inconsistent release rates from the microsphere shell and inner core. All groups of microspheres showed no cytotoxicity, good biocompatibility, and the ability to promote osteoblast proliferation. The microspheres loaded with BMP-2 also promoted osteoblast differentiation, and VEGF-loaded microspheres promoted the proliferation and differentiation of vascular endothelial cells. The BMP-2 (core)/VEGF (shell) microsphere group best promoted osteoblast differentiation. The microspheres prepared in this study exhibited slow sequential release of BMP-2 and VEGF and showed good biocompatibility along with the ability to promote osteoblast differentiation and vascular endothelial cell proliferation.

Preparation, characterization, and evaluation of anti-tyrosinase activity of solid lipid nanoparticles containing Undecylenoyl phenylalanine (Sepiwhite®)

BACKGROUND

Hyperpigmentation is darkened patches or spots on the skin occurred by increased melanin. Undecylenoyl phenylalanine (Sepiwhite®), as a commercial lipophilic derivative of phenylalanine, is a powerful new brightener that can be used in the treatment of skin pigmentation disorders.

AIMS

Solid lipid nanoparticles (SLNs) increase the efficiency of hydrophobic drugs. The current study aimed to prepare and characterize SLNs containing Sepiwhite (SEPI-SLN).

METHODS

In this study, an optimized SEPI-SLN formulation was selected by applying the response surface method. In vitro drug loading content, the release profile of SEPI, and cell viability were investigated. The permeation rate of SEPI-SLN was also compared to conventional cream containing Sepiwhite (SEPI-CREAM). Furthermore, the anti-tyrosinase activity of Sepiwhite was also evaluated.

RESULTS

The optimized formulation showed a spherical morphology with particle size and entrapment efficiency of 218.6 ± 11.1 nm and % 87.31 ± 0.65, respectively. Differential scanning calorimetry (DSC) analysis confirmed SEPI-loaded SLN formulation with no drug-lipid incompatibility. The in vitro permeation experiment revealed the enhanced cutaneous uptake of SEPI-SLN. The results also showed that Sepiwhite could stop melanogenesis with inhibition of the tyrosinase enzyme.

CONCLUSION

Our findings confirm that SLNs could be a proper nanocarrier for the relevant usage of Sepiwhite as a powerful brightener agent.

Construction and osteogenic effects of 3D-printed porous titanium alloy loaded with VEGF/BMP-2 shell-core microspheres in a sustained-release system

The repair and reconstruction of bone defects remain a challenge in orthopedics. The present study offers a solution to this problem by developing a vascular endothelial growth factor (VEGF)/bone morphogenetic protein 2 (BMP-2) shell-core microspheres loaded on 3D-printed porous titanium alloy via gelatin coating to prepare a titanium-alloy microsphere scaffold release system. The composite scaffold was characterized via scanning electron microscope (SEM) and energy disperse spectroscopy (EDS), and the effect of the composite scaffold on the adhesion, proliferation, and differentiation of osteoblasts were determined in vitro. Furthermore, a rabbit femoral defect model was established to verify the effect of the composite scaffold on osteogenesis and bone formation in vivo. The results demonstrated that the composite scaffold could release VEGF and BMP-2 sequentially. Meanwhile, the composite scaffold significantly promoted osteoblast adhesion, proliferation, and differentiation (p < 0.05) compared to pure titanium alloy scaffolds in vitro. Furthermore, the composite scaffold can exhibit significant osteogenic differentiation (p < 0.05) than gelatin-coated titanium alloy scaffolds. The in vivo X-rays demonstrated that the implanted scaffolds were in a good position, without inflammation and infection. Micro-CT and quantitative results of new bone growth illustrated that the amount of new bone in the composite scaffold is significantly higher than that of the gelatin-coated and pure titanium alloy scaffolds (p < 0.05). Similarly, the fluorescence labeling and V-G staining of hard tissue sections indicated that the bone integration capacity of the composite scaffold was significantly higher than the other two groups (p < 0.05). This research suggests that VEGF/BMP-2 shell-core microspheres loaded on 3D-printed titanium alloy porous scaffold through gelatin hydrogel coating achieved the sequential release of VEGF and BMP-2. Most importantly, the in vitro and in vivo study findings have proven that the system could effectively promote osteogenic differentiation and osseointegration.

Effect of silicon or cerium doping on the anti-inflammatory activity of biphasic calcium phosphate scaffolds for bone regeneration

Biphasic calcium phosphate (BCP) bioceramics composed of hydroxyapatite and β-tricalcium phosphate have attracted considerable attention as ideal bone substitutes for reconstructive surgery, orthopedics, and dentistry, owing to their similar chemical composition to bone mineral and biocompatibility. The addition of trace elements to BCP bioceramics, such as magnesium (Mg), cerium (Ce), and silicon (Si), can alter the physicochemical and biological properties of the resulting materials. To improve the anti-inflammatory activity of a pure BCP scaffold, this study developed a simple wet chemical precipitation and gel-casting method to fabricate microporous BCP scaffolds containing Si or Ce. The BCP scaffolds exhibited interconnected microporous structures with uniform micropores and unequiaxed grains. No changes in the phase composition and microstructure of the scaffolds with the Si or Ce doping were observed. Conversely, Si or Ce doping into the BCP crystal lattice influenced the in vitro biological activity of the scaffolds and the bone-forming ability of the cells cultured on the BCP scaffolds. The results of biological activity assays demonstrated that Ce-BCP promoted cell proliferation and osteogenic differentiation more effectively than the other scaffolds. In particular, Ce-BCP significantly suppressed the expression of bone-active cytokines via the anti-inflammatory and anti-oxidative effects. Therefore, Si- or Ce-doped BCP scaffolds can contribute to providing a new generation of bone graft substitutes.

Contributions of supercritical fluid technology for advancing decellularization and postprocessing of viable biological materials

The demand for tissue and organ transplantation worldwide has led to an increased interest in the development of new therapies to restore normal tissue function through transplantation of injured tissue with biomedically engineered matrices. Among these developments is decellularization, a process that focuses on the removal of immunogenic cellular material from a tissue or organ. However, decellularization is a complex and often harsh process that frequently employs techniques that can negatively impact the properties of the materials subjected to it. The need for a more benign alternative has driven research on supercritical carbon dioxide (scCO₂) assisted decellularization. scCO₂ can achieve its critical point at relatively low temperature and pressure conditions, and for its high transfer rate and permeability. These properties make scCO₂ an appealing methodology that can replace or diminish the exposure of harsh chemicals to sensitive materials, which in turn could lead to better preservation of their biochemical and mechanical properties. The presented review covers relevant literature over the last years where scCO₂-assisted decellularization is employed, as well as discussing major topics such as the mechanism of action behind scCO₂-assisted decellularization, CO₂ and cosolvents' solvent properties, effect of the operational parameters on decellularization efficacy and on the material's properties.

Recent advances in the application of mesoporous silica-based nanomaterials for bone tissue engineering

Silica nanomaterials (SNMs) and their composites have recently been investigated as scaffolds for bone tissue engineering. SNM scaffolds possess the ability to encourage bone cell growth and also allow the simultaneous delivery of biologically active biomolecules that are encapsulated in the mesopores. Their high mechanical strength, low cytotoxicity, ability to stimulate both the proliferation and osteogenic differentiation of progenitor cells make the SNMs appropriate scaffolds. Their physiochemical properties facilitate the cell spreading process, allow easy access to nutrients and help the cell-cell communication process during bone tissue engineering. The ability to deliver small biomolecules, such as dexamethasone, different growth factors, vitamins and mineral ions depends on the morphology, porosity, and crystallinity of SNMs and their composites with other polymeric materials. In this review, the abilities of SNMs to perform as suitable scaffolds for bone tissue engineering are comprehensively discussed.

Foaming of Polycaprolactone and Its Impregnation with Quercetin Using Supercritical CO2

Foamed polycaprolactone impregnated with quercetin was carried out with a batch foaming technique using supercritical CO₂. The experimental design was developed to study the influence of pressure (15–30 MPa), temperature (308–333 K), and depressurization rate (0.1–20) on the foam structure, melting temperature, and release tests of composites. The characterization of the experiments was carried out using scanning electron microscopy, X-ray diffractometer, and differential scanning calorimetry techniques. It was observed that the porosity created in the polymer had a heterogeneous structure, as well as the impregnation of the quercetin during the process. On the other hand, controlled release tests showed a significant delay in the release of quercetin compared to commercial quercetin.

Supercritical CO2 foamed composite scaffolds incorporating bioactive lipids promote vascularized bone regeneration via Hif-1α upregulation and enhanced type H vessel formation

Bone tissue engineering has substantial potential for the treatment of massive bone defects; however, efficient vascularization coupled with bone regeneration still remains a challenge in this field. In the current study, supercritical carbon dioxide (scCO₂) foaming technique was adopted to fabricate mesoporous bioactive glasses (MBGs) particle-poly (lactic-co-glycolic acid) (PLGA) composite scaffolds with appropriate mechanical and degradation properties as well as in vitro bioactivity. The MBG-PLGA scaffolds incorporating the bioactive lipid FTY720 (designated as FTY/MBG-PLGA) exhibited simultaneously sustained release of the bioactive lipid and ions. In addition to providing a favorable microenvironment for cellular adhesion and proliferation, FTY/MBG-PLGA scaffolds significantly facilitated the in vitro osteogenic differentiation of rBMSCs and also markedly stimulated the upregulation of Hif-1α expression via the activation of the Erk1/2 pathway, which mediated the osteogenic and pro-angiogenic effects on rBMSCs. Furthermore, FTY/MBG-PLGA extracts induced superior in vitro angiogenic performance of HUVECs. In vivo evaluation of critical-sized rat calvarial bone defects indicated that FTY/MBG-PLGA scaffolds potently promoted vascularized bone regeneration. Notably, the significantly enhanced formation of type H vessels (CD31^hiEmcn^hi neo-vessels) was observed in newly formed bone tissue in FTY/MBG-PLGA group, strongly suggesting that FTY720 and therapeutic ions released from the scaffolds synergistically induced more type H vessel formation, which indicated the coupling of angiogenesis and osteogenesis to achieve efficiently vascularized bone regeneration. Overall, the results indicated that the foamed porous MBG-PLGA scaffolds incorporating bioactive lipids achieved desirable vascularization-coupled bone formation and could be a promising strategy for bone regenerative medicine. STATEMENT OF SIGNIFICANCE: Efficacious coupling of vascularizationandbone formation is critical for the restoration of large bone defects. Anoveltechnique was used to fabricate composite scaffolds incorporating bioactive lipids which possessedsynergistic cues of bioactive lipids and therapeutic ions to potently promotebone regenerationas well as vascularization. The underlying molecular mechanism for the osteogenic and pro-angiogenic effects of the compositescaffolds was unveiled. Interestingly, the scaffolds were furtherfoundto enhance the formation oftype H capillarieswithin the bone healing microenvironment to couple angiogenesis to osteogenesis to achieve satisfyingvascularizedbone regeneration.These findings provide a novel strategy to develop efficiently vascularized engineering constructs to treat massive bone defects.

Supercritical fluid-assisted controllable fabrication of open and highly interconnected porous scaffolds for bone tissue engineering

Recently tremendous progress has been evidenced by the advancements in developing innovative three-dimensional (3D) scaffolds using various techniques for addressing the autogenous grafting of bone. In this work, we demonstrated the fabrication of porous polycaprolactone (PCL) scaffolds for osteogenic differentiation based on supercritical fluid-assisted hybrid processes of phase inversion and foaming. This eco-friendly process resulted in the highly porous biomimetic scaffolds with open and interconnected architectures. Initially, a 2³ factorial experiment was designed for investigating the relative significance of various processing parameters and achieving better control over the porosity as well as the compressive mechanical properties of the scaffold. Then, single factor experiment was carried out to understand the effects of various processing parameters on the morphology of scaffolds. On the other hand, we encapsulated a growth factor, i.e., bone morphogenic protein-2 (BMP-2), as a model protein in these porous scaffolds for evaluating their osteogenic differentiation. In vitro investigations of growth factor loaded PCL scaffolds using bone marrow stromal cells (BMSCs) have shown that these growth factor-encumbered scaffolds were capable of differentiating the cells over the control experiments. Furthermore, the osteogenic differentiation was confirmed by measuring the cell proliferation, and alkaline phosphatase (ALP) activity, which were significantly higher demonstrating the active bone growth. Together, these results have suggested that the fabrication of growth factor-loaded porous scaffolds prepared by the eco-friendly hybrid processing efficiently promoted the osteogenic differentiation and may have a significant potential in bone tissue engineering.

Supercritical carbon dioxide-based technologies for the production of drug nanoparticles/nanocrystals - A comprehensive review

Low drug bioavailability, which is mostly a result of poor aqueous drug solubilities and of inadequate drug dissolution rates, is one of the most significant challenges that pharmaceutical companies are currently facing, since this may limit the therapeutic efficacy of marketed drugs, or even result in the discard of potential highly effective drug candidates during developmental stages. Two of the main approaches that have been implemented in recent years to overcome poor drug solubility/dissolution issues have frequently involved drug particle size reduction (i.e., micronization/nanonization) and/or the modification of some of the physicochemical and structural properties of poorly water soluble drugs. A large number of particle engineering methodologies have been developed, tested, and applied in the synthesis and control of particle size/particle-size distributions, crystallinities, and polymorphic purities of drug micro- and nano-particles/crystals. In recent years pharmaceutical processing using supercritical fluids (SCF), in general, and supercritical carbon dioxide (scCO₂), in particular, have attracted a great attention from the pharmaceutical industry. This is mostly due to the several well-known advantageous technical features of these processes, as well as to other increasingly important subjects for the pharmaceutical industry, namely their "green", sustainable, safe and "environmentally-friendly" intrinsic characteristics. In this work, it is presented a comprehensive state-of-the-art review on scCO₂-based processes focused on the formation and on the control of the physicochemical, structural and morphological properties of amorphous/crystalline pure drug nanoparticles. It is presented and discussed the most relevant scCO₂, scCO₂-based fluids and drug physicochemical properties that are pertinent for the development of successful pharmaceutical products, namely those that are critical in the selection of an adequate scCO₂-based method to produce pure drug nanoparticles/nanocrystals. scCO₂-based nanoparticle formation methodologies are classified in three main families, and in terms of the most important role played by scCO₂ in particle formation processes: as a solvent; as an antisolvent or a co-antisolvent; and as a "high mobility" additive (a solute, a co-solute, or a co-solvent). Specific particle formation methods belonging to each one of these families are presented, discussed and compared. Some selected amorphous/crystalline drug nanoparticles that were prepared by these methods are compiled and presented, namely those studied in the last 10-15 years. A special emphasis is given to the formation of drug cocrystals. It is also discussed the fundamental knowledge and the main mechanisms in which the scCO₂-based particle formation methods rely on, as well as the current status and urgent needs in terms of reliable experimental data and of robust modeling approaches. Other addressed and discussed topics include the currently available and the most adequate physicochemical, morphological and biological characterization methods required for pure drug nanoparticles/nanocrystals, some of the current nanometrology and regulatory issues associated to the use of these methods, as well as some scale-up, post-processing and pharmaceutical regulatory subjects related to the industrial implementation of these scCO₂-based processes. Finally, it is also discussed the current status of these techniques, as well as their future major perspectives and opportunities for industrial implementation in the upcoming years.

Antimicrobial Properties and Osteogenicity of Vancomycin-Loaded Synthetic Scaffolds Obtained by Supercritical Foaming

Advanced porous synthetic scaffolds are particularly suitable for regeneration of damaged tissues, but there is the risk of infections due to the colonization of microorganisms, forming biofilms. Supercritical foaming is an attractive processing method to prepare bone scaffolds, regulating simultaneously the porosity and loading of bioactive compounds without loss of activity. In this work, scaffolds made of poly-ε-caprolactone (50 kDa), containing chitosan and an antimicrobial agent (vancomycin), were processed by supercritical CO₂ foaming for bone regeneration purposes. The obtained scaffolds showed a suitable combination of morphological (porosity, pore size distribution, and interconnectivity), time-dependent in vitro vancomycin release behavior and biological properties (cell viability and proliferation, osteodifferentiation, and tissue-scaffold integration). The scaffolds sustained vancomycin release for more than 2 weeks. Finally, the antimicrobial activity of the scaffolds was tested against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria after 24 h of incubation with full growth inhibition for S. aureus.

Biodegradable ceramic-polymer composites for biomedical applications: A review

The present work focuses on the state-of-the-art of biodegradable ceramic-polymer composites with particular emphasis on influence of various types of ceramic fillers on properties of the composites. First, the general needs to create composite materials for medical applications are briefly introduced. Second, various types of polymeric materials used as matrices of ceramic-containing composites and their properties are reviewed. Third, silica nanocomposites and their material as well as biological characteristics are presented. Fourth, different types of glass fillers including silicate, borate and phosphate glasses and their effect on a number of properties of the composites are described. Fifth, wollastonite as a composite modifier and its effect on composite characteristics are discussed. Sixth, composites containing calcium phosphate ceramics, namely hydroxyapatite, tricalcium phosphate and biphasic calcium phosphate are presented. Finally, general possibilities for control of properties of composite materials are highlighted.

Polymeric protective agents for nanoparticles in drug delivery and targeting

Surface modification/functionalization of nanoparticles (NPs) using polymeric protective agents is an issue of great importance and actuality for drug delivery and targeting. Improving the blood circulation half-life of surface-protected nanocarriers is closely related to the elimination of main biological barriers and limiting factors (protein absorption and opsonization), due to the phagocytic activity of reticuloendothelial system. For passive or active targeted delivery, in biomedical area, surface-functionalized NPs with tissue-recognition ligands were designed and optimized as a result of modern research techniques. Also, multi-functionalized nanostructures are characterized by enhanced bioavailability, efficacy, targeted localization, active cellular uptake, and low side effects. Surface-protected NPs are obtained from biocompatible, biodegradable and less toxic natural polymers (dextran, β-cyclodextrin, chitosan, hyaluronic acid, heparin, gelatin) or synthetic polymers, such as poly(lactic acid), poly(lactic-co-glycolic) acid, poly(ε-caprolactone) and poly(alkyl cyanoacrylates). PEGylation is one of the most important functionalization methods providing steric stabilization, long circulating and 'stealth' properties for both polymeric and inorganic-based nanosystems. In addition, for their antimicrobial, antiviral and antitumor effects, cutting-edge researches in the field of pharmaceutical nanobiotechnology highlighted the importance of noble metal (platinum, gold, silver) NPs decorated with biopolymers.

Electrophoretic Deposition of Dexamethasone-Loaded Mesoporous Silica Nanoparticles onto Poly(L-Lactic Acid)/Poly(ε-Caprolactone) Composite Scaffold for Bone Tissue Engineering

The incorporation of microcarriers as drug delivery vehicles into polymeric scaffold for bone regeneration has aroused increasing interest. In this study, the aminated mesoporous silica nanoparticles (MSNs-NH2) were prepared and used as microcarriers for dexamethasone (DEX) loading. Poly(l-lactic acid)/poly(ε-caprolactone) (PLLA/PCL) nanofibrous scaffold was fabricated via thermally induced phase separation (TIPS) and served as template, onto which the drug-loaded MSNs-NH2 nanoparticles were deposited by electrophoretic deposition (EPD). The physicochemical and release properties of the prepared scaffolds (DEX@MSNs-NH2/PLLA/PCL) were examined, and their osteogenic activities were also evaluated through in vitro and in vivo studies. The release of DEX from the scaffolds revealed an initial rapid release followed by a slower and sustained one. The in vitro results indicated that the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited good biocompatibility to rat bone marrow-derived mesenchymal stem cells (BMSCs). Also, BMSCs cultured on the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited a higher degree of osteogenic differentiation than those cultured on PLLA/PCL and MSNs-NH2/PLLA/PCL scaffolds, in terms of alkaline phosphatase (ALP) activity, mineralized matrix formation, and osteocalcin (OCN) expression. Furthermore, the in vivo results in a calvarial defect model of Sprague-Dawley (SD) rats demonstrated that the DEX@MSNs-NH2/PLLA/PCL scaffold could significantly promote calvarial defect healing compared with the PLLA/PCL scaffold. Thus, the EPD technique provides a convenient way to incorporate osteogenic agents-containing microcarriers to polymer scaffold, and thus, prepared composite scaffold could be a potential candidate for bone tissue engineering application due to its capacity for delivery of osteogenic agents.

Mesoporous silica nanoparticles in tissue engineering – a perspective

In this review, we summarize the latest developments and give a perspective on future applications of mesoporous silica nanoparticles (MSNs) in regenerative medicine. MSNs constitute a flexible platform for controlled delivery of drugs and imaging agents in tissue engineering and stem cell therapy. We highlight the recent advances in applying MSNs for controlled drug delivery and stem cell tracking. We touch upon novel functions of MSNs in real time imaging of drug release and biological function, and as tools to control the chemical and mechanical environment of stem cells. We discuss the need for novel model systems for studying biofunctionality and biocompatibility of MSNs, and how the interdisciplinary activities within the field will advance biotechnology research.

Silicon oxide based materials for controlled release in orthopedic procedures

By virtue of excellent tissue responses in bone tissue, silicon oxide (silica) based materials have been used for bone tissue engineering. Creating nanoscale porosity within silica based materials expands their applications into the realm of controlled release area. This additional benefit of silica based materials widens their application in the orthopedic fields in a major way. This review discusses the various chemical and physical forms of silica based controlled release materials, the release mechanisms, the applications in orthopedic procedures and their overall biocompatibility.

Additive manufacturing of scaffolds with dexamethasone controlled release for enhanced bone regeneration

The adoption of additive manufacturing in tissue engineering and regenerative medicine (TERM) strategies greatly relies on the development of novel 3D printable materials with advanced properties. In this work we have developed a material for bone TERM applications with tunable bioerosion rate and dexamethasone release profile which can be further employed in fused deposition modelling (the most common and accessible 3D printing technology in the market). The developed material consisted of a blend of poly-ϵ-caprolactone (PCL) and poloxamine (Tetronic®) and was processed into a ready-to-use filament form by means of a simplified melt-based methodology, therefore eliminating the utilization of solvents. 3D scaffolds composed of various blend formulations were additively manufactured and analyzed revealing blend ratio-specific degradation rates and dexamethasone release profiles. Furthermore, in vitro culture studies revealed a similar blend ratio-specific trend concerning the osteoinductive activity of the fabricated scaffolds when these were seeded and cultured with human mesenchymal stem cells. The developed material enables to specifically address different regenerative requirements found in various tissue defects. The versatility of such strategy is further increased by the ability of additive manufacturing to accurately fabricate implants matching any given defect geometry.

Osteogenic poly(ε-caprolactone)/poloxamine homogeneous blends prepared by supercritical foaming

Homogeneous poly(ε-caprolactone) (PCL) and poloxamines (PLXs) porous blends were prepared using a supercritical carbon dioxide-assisted foaming/mixing (SFM) approach aiming to obtain cytocompatible implantable materials presenting tunable morphologies, bioerosion rates, bioactive molecules release and osteogenic features. Pure PCL, pure PLXs (T908 and T1107 varieties) and three distinct PCL:PLX 75:25, 50:50, 25:75% w/w blends, with and without the osteogenic and angiogenic bioactive molecule simvastatin were processed at constant pressure of 20 MPa and temperature of 40 °C or 43 °C, for T1107 and T908, respectively. Obtained porous blends were characterized applying a wide range of techniques and in vitro methods. Calorimetric analysis showed that hydrophilic T908 and T1107 PLXs are miscible with PCL for all tested compositions. Prepared PCL:PLX porous blends rapidly lost mass when immersed into phosphate buffer pH 7.4 due to PLXs dissolution and then went through slow and almost constant erosion rates for the subsequent weeks due to PCL slow hydrolytic degradation, which explains the rapid initial release of simvastatin and its subsequent sustained release for longer periods of time. PCL and PCL:PLX 75:25% w/w porous blends, containing or not simvastatin, showed a high cytocompatibility with SAOS-2 cells. In addition, prepared biomaterials promoted mesenchymal stem cells proliferation and their differentiation into osteoblasts. Overall, obtained results showed novel possibilities of addressing local treatment of small bone defects/fractures using highly porous PCL:PLX homogeneous blends.