Nanocrystal formulations of a poorly soluble drug. 2. Evaluation of nanocrystal liver uptake and distribution after intravenous administration to mice

The In Vivo Fate of Polycatecholamine Coated Nanoparticles Is Determined by a Fibrinogen Enriched Protein Corona

Polycatecholamine coatings have attracted significant attention in the past 10 years owing to their ability to functionalize a wide range of materials. Here we apply the use of such coatings to drug nanocrystals, made from a poorly soluble drug compound, to postfunctionalize the nanocrystal surface with the aim of providing steric stabilization and extending their circulation time after intravenous injection. We show that both polydopamine and polynorepinephrine can be used to successfully modify drug nanocrystals and subsequently incorporate end-functionalized PEG to the surface. Even though high grafting densities of PEG were achieved, we observed rapid clearance and increased liver uptake for polycatecholamine functionalized drug nanocrystals. Using both surface sensitive model systems and protein corona profiling, we determine that the rapid clearance was correlated with an increase in adsorption of proteins involved in coagulation to the polycatecholamine surface, with fibrinogen being the most abundant. Further analysis of the most abundant proteins revealed a significant increase in thiol-rich proteins on polycatecholamine coated surfaces. The observed interaction with coagulation proteins highlights one of the current challenges using polycatecholamines for drug delivery but might also provide insights to the growing use of these materials in hemostatic applications.

Intravenous nanocrystals: fabrication, solidification, in vivo fate, and applications for cancer therapy

INTRODUCTION

Intravenous nanocrystals (INCs) have shown intrinsic advantages in antitumor applications, particularly their properties of high drug loading, low toxicity, and controllable size. Therefore, it has a very bright application prospect as a drug delivery system.

AREAS COVERED

The ideal formulation design principles, fabrication, solidification, in vivo fate of INCs, the applications in drug delivery system (DDS) and the novel applications are covered in this review.

EXPERT OPINION

It is vital to select a suitable formulation and fabrication method to produce a stable and sterile INCs. Besides, the type of stabilizers and physical characteristics can also influence the in vivo fate of INCs, which is worthy of further studying. Based on wide researches about applications of INCs in cancer, biomimetic INCs are concerned increasingly for its favorable compatibility. The output of these studies suggested that INCs-based drug delivery could be a novel strategy for addressing the delivery of the drug that faces solubility, bioavailability, and toxicity problems.

Preclinical studies of a high drug-loaded meloxicam nanocrystals injection for analgesia

Meloxicam (MLX) is considered to have significant analgesic properties. However, the analgesic effects of MLX are compromised by its poor water solubility and thus the low drug loading. The purpose of this study was to develop a high drug-loaded MLX injection by formulating it into nanocrystals (NCs) for the treatment of analgesia. The developed MLXNCs exhibited satisfactory particle sizes and remarkably in vitro dissolution behaviors. In addition, the plasma concentrations of MLXNCs were comparable with the MLX solution (formulated with 1.0% polyoxyethylene castor oil 35) in rats. The acetic acid-induced writhing tests, hot plate tests and hind paw incision experiments demonstrated that the MLXNCs had significant analgesic effects. The findings provide insights into the developed high drug-loaded MLXNCs and provide new therapeutic options for acute and chronic pain management.

Resveratrol and its nanocrystals: A promising approach for cancer therapy?

There has been a significant research interest in nanocrystals as a promising technology for improving the therapeutic efficacy of poorly water-soluble drugs, such as resveratrol. Little is known about the interaction of nanocrystals with biological tissue. The aim of this study was to investigate the potential use of resveratrol (RSV) and its nanocrystals (NANO-RSV) as antitumor agents in Ehrlich ascites tumour (EAT)-bearing mice and the interaction of nanocrystals with biological tissue through biochemical and histological changes of kidney, liver and EAT cells. After intraperitoneal injection of 2.5 × 10⁶ cells into the abdominal cavity of mice, treatment of animals was started next day by injecting RSV or NANO-RSV at a dose of either 25 or 50 mg/kg every other day for 14 days. The results show that the administration of resveratrol and its nanocrystals lead to significant reductions in the proliferation of tumour cells in the abdominal cavity, and a reduction of the number of blood vessels in the peritoneum, with low systemic toxicity. In histopathological examinations, greater hepatocellular necrosis and apoptosis, hepatic fibrosis around the central vein and degeneration with minor fatty change were observed with RSV than with NANO-RSV. Inflammation with proximal tubular necrosis and renal glomerulus swelling were also observed, together with slight elevation of several biochemical parameters in both the RSV and NANO-RSV groups. In order to increase the beneficial effects and reduce risks associated with resveratrol nanocrystals, additional factors such as dose, genetic factors, health status, and the nature of the target cells should also be considered.

The Scavenger Function of Liver Sinusoidal Endothelial Cells in Health and Disease

The aim of this review is to give an outline of the blood clearance function of the liver sinusoidal endothelial cells (LSECs) in health and disease. Lining the hundreds of millions of hepatic sinusoids in the human liver the LSECs are perfectly located to survey the constituents of the blood. These cells are equipped with high-affinity receptors and an intracellular vesicle transport apparatus, enabling a remarkably efficient machinery for removal of large molecules and nanoparticles from the blood, thus contributing importantly to maintain blood and tissue homeostasis. We describe here central aspects of LSEC signature receptors that enable the cells to recognize and internalize blood-borne waste macromolecules at great speed and high capacity. Notably, this blood clearance system is a silent process, in the sense that it usually neither requires or elicits cell activation or immune responses. Most of our knowledge about LSECs arises from studies in animals, of which mouse and rat make up the great majority, and some species differences relevant for extrapolating from animal models to human are discussed. In the last part of the review, we discuss comparative aspects of the LSEC scavenger functions and specialized scavenger endothelial cells (SECs) in other vascular beds and in different vertebrate classes. In conclusion, the activity of LSECs and other SECs prevent exposure of a great number of waste products to the immune system, and molecules with noxious biological activities are effectively “silenced” by the rapid clearance in LSECs. An undesired consequence of this avid scavenging system is unwanted uptake of nanomedicines and biologics in the cells. As the development of this new generation of therapeutics evolves, there will be a sharp increase in the need to understand the clearance function of LSECs in health and disease. There is still a significant knowledge gap in how the LSEC clearance function is affected in liver disease.

The contribution of absorption of integral nanocrystals to enhancement of oral bioavailability of quercetin

In this study, self-discriminating hybrid nanocrystals was utilized to explore the biological fate of quercetin hybrid nanocrystals (QT-HNCs) with diameter around 280 nm (QT-HNCs-280) and 550 nm (QT-HNCs-550) following oral and intravenous administration and the contribution of integral nanocrystals to oral bioavailability enhancement of QT was estimated by comparing the absolute exposure of integral QT-HNCs and total QT in the liver. Results showed that QT-HNCs could reside in vivo as intact nanocrystals for as long as 48 h following oral and intravenous administration. A higher accumulation of integral QT-HNCs in liver and lung was observed for both oral and intravenous administration of QT-HNCs. The particle size affects the absorption and biodistribution of integral QT-HNCs and total QT. As compared to QT-HNCs-550, QT-HNCs-280 with smaller particle size is more easily absorbed, but dissolves faster in vivo, leading to higher distribution of QT (146.90 vs. 117.91 h·μg/mL) but lower accumulation of integral nanocrystals (6.8 2e10 vs. 15.27e10 h·[p/s]/[µW/cm²]) in liver following oral administration. Due to its slower dissolution and enhanced recognition by RES, QT-HNCs-550 with larger diameter shows higher liver distribution for both of QT (1015.80 h·μg/mL) and integral nanocrystals (259.63e10 h·[p/s]/[µW/cm²]) than those of QT-HNCs-280 (673.82 & 77.66e10 h·[p/s]/[µW/cm²]) following intravenous administration. The absolute exposure of integral QT-HNCs in liver following oral administration of QT-HNCs are 8.78% for QT-HNCs-280 and 5.88% for QT-HNCs-550, while the absolute exposure of total QT for QT-HNCs-280 and QT-HNCs-550 are 21.80% and 11.61%, respectively. Owing to imprecise quantification method, a surprisingly high contribution of integral QT-HNCs to oral bioavailability enhancement of QT (40.27% for QT-HNCs-280 and 50.65% for QT-HNCs-550) was obtained. These results revealed significant difference in absorption and biodistrbution between integral nanocrystals and overall drugs following oral and intravenous administration of QT-HNCs, and provided a meaningful reference for the contribution of integral nanocrystals to overall bioavailability enhancement.

Milling of poorly soluble crystalline drug compounds to generate appropriate particle sizes for inhaled sustained drug delivery

One of the simplest design concepts of inhaled sustained drug delivery to the lung is to utilize the slow dissolution of drug crystals with poor aqueous solubility. An optimum dissolution rate, and thereby a delivery profile locally in the lung tissue, can be achieved in a reliable way by selecting a compound with an appropriate combination of solubility and particle size. It is in our experience relatively straightforward to manufacture monomodal particle size distributions of poorly soluble drug crystals in the mass median diameter range of either a few micrometers or a few hundred nanometers, but very challenging to manufacture a monomodal distribution in the range intermediate to these two. In this manuscript, we describe an investigation with the objective of generating desired particle sizes in the whole size range from a few micrometers to a few hundred nanometers for inhaled sustained drug delivery, by utilizing Adaptive Focused Acoustic (AFA) milling and planetary bead-milling. By combining the two different milling techniques it was possible to produce two to three distinctly different monomodal or almost monomodal particle size distributions in the desired particle size range of each of the model drug compounds in milligram scale. The dissolution kinetics of the different particle sizes of the model drugs were measured experimentally as well as predicted theoretically, showcasing that the dissolution kinetics can be characterized, predicted and significantly changed in a controlled way by modifying the particle size. For one of the model drugs, it was shown in an in vivo rat study that the inhaled sustained drug delivery profile in the lung tissue could be significantly changed by modifying the particle size of the drug.

Recent progress in drug delivery

Drug delivery systems (DDS) are defined as methods by which drugs are delivered to desired tissues, organs, cells and subcellular organs for drug release and absorption through a variety of drug carriers. Its usual purpose to improve the pharmacological activities of therapeutic drugs and to overcome problems such as limited solubility, drug aggregation, low bioavailability, poor biodistribution, lack of selectivity, or to reduce the side effects of therapeutic drugs. During 2015-2018, significant progress in the research on drug delivery systems has been achieved along with advances in related fields, such as pharmaceutical sciences, material sciences and biomedical sciences. This review provides a concise overview of current progress in this research area through its focus on the delivery strategies, construction techniques and specific examples. It is a valuable reference for pharmaceutical scientists who want to learn more about the design of drug delivery systems.

Expanding therapeutic utility of carfilzomib for breast cancer therapy by novel albumin-coated nanocrystal formulation

Carfilzomib (CFZ) is the second-in-class proteasome inhibitor with much improved efficacy and safety profiles over bortezomib in multiple myeloma patients. In expanding the utility of CFZ to solid cancer therapy, the poor aqueous solubility and in vivo instability of CFZ are considered major drawbacks. We investigated whether a nanocrystal (NC) formulation can address these issues and enhance anticancer efficacy of CFZ against breast cancer. The surface of NC was coated with albumin in order to enhance the formulation stability and drug delivery to tumors via interactions with albumin-binding proteins located in and near cancer cells. The novel albumin-coated NC formulation of CFZ (CFZ-alb NC) displayed improved metabolic stability and enhanced cellular interactions, uptake and cytotoxic effects in breast cancer cells in vitro. Consistently, CFZ-alb NC showed greater anticancer efficacy in a murine 4T1 orthotopic breast cancer model than the currently used cyclodextrin-based formulation. Overall, our results demonstrate the potential of CFZ-alb NC as a viable formulation for breast cancer therapy.

Study on Formulation, in vivo Exposure, and Passive Targeting of Intravenous Itraconazole Nanosuspensions

The pharmacokinetic profile of a drug can be different when delivered as a nanosuspension compared with a true solution, which may in turn affect the therapeutic effect of the drug. The goal of this study was to prepare itraconazole nanosuspensions (ITZ-Nanos) stabilized by an amphipathic polymer, polyethylene glycol-poly (benzyl aspartic acid ester) (PEG-PBLA), by the precipitation-homogenization, and study the pharmacokinetic profile of the ITZ-Nanos. The particle size and morphology of nanosuspensions were determined by Zetasizer and field emission scanning electron microscope (SEM), respectively. The dissolution profile was evaluated using a paddle method according to Chinese Pharmacopoeia 2015. The level of ITZ in plasma and tissues was measured by a HPLC method. The optimized ITZ-Nanos had an average particle size of 268.1 ± 6.5 nm and the particles were in a rectangular form. The dissolution profile of ITZ-Nanos was similar to that of commercial ITZ injections, with nearly 90% ITZ released in the first 5 min. The ITZ-Nanos displayed different pharmacokinetic properties compared with the commercial ITZ injections, including a decreased initial drug concentration, increased plasma half-life and mean residence time (MRT), and increased concentration in the liver, lung, and spleen. The ITZ-Nanos can change the in vivo distribution of ITZ and result in passive targeting to the organs with mononuclear phagocyte systems (MPS).

Enhancement of ketoconazole dissolution rate by the liquisolid technique

The study was conducted to enhance the dissolution rate of ketoconazole (KCZ) (a poorly water-soluble drug) using the liquisolid technique. Microcrystalline cellulose, colloidal silica, PEG400 and polyvinyl pyrrolidone (PVP) were employed as a carrier, coating substance, nonvolatile solvent and additive in the KCZ liquisolid compact formulation, respectively. The drug-to-PEG400 and carrier-to-coating ratio variations, PVP concentration and aging effects on the in vitro release behavior were assessed. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD) data revealed no alterations in the crystalline form of the drug and the KCZ-excipient interactions within the process. The load factor and the drug release rate were significantly enhanced compared to directly compressed tablets in the presence of the additive. Increasing the PEG400-to-drug ratio in liquid medications enhanced the dissolution rate remarkably. The dissolution profile and hardness of liquisolid compacts were not significantly altered by keeping the tablets at 40 °C and relative humidity of 75 % for 6 months. With the proposed modification of the liquisolid process, it is possible to obtain flowable, compactible liquisolid powders of high-dose poorly-water soluble drugs with an enhanced dissolution rate.

Practical guidelines for the characterization and quality control of pure drug nanoparticles and nano-cocrystals in the pharmaceutical industry

The number of poorly soluble drug candidates is increasing, and this is also seen in the research interest towards drug nanoparticles and (nano-)cocrystals; improved solubility is the most important application of these nanosystems. In order to confirm the functionality of these nanoparticles throughout their lifecycle, repeatability of the formulation processes, functional performance of the formed systems in pre-determined way and system stability, a thorough physicochemical understanding with the aid of necessary analytical techniques is needed. Even very minor deviations in for example particle size or size deviation in nanoscale can alter the product bioavailability, and the effect is even more dramatic with the smallest particle size fractions. Also, small particle size sets special requirements for the analytical techniques. In this review most important physicochemical properties of drug nanocrystals and nano-cocrystals are presented, suitable analytical techniques, their pros and cons, are described with the extra input on practical point of view.

Tracking translocation of self-discriminating curcumin hybrid nanocrystals following intravenous delivery

Nanocrystals hold great potential as parenteral delivery carrier systems for poorly water-soluble drugs. Elucidation of the in vivo fate of parenteral nanocrystals is of pharmacological, toxicological and mechanistic significance. However, it is of tremendous difficulty to monitor real-time translocation of nanocrystals in vivo owing to progressive dissolution of nanocrystals and a lack of workable tools to probe nanocrystals. In this study, self-discriminating hybrid nanocrystals (SDHNs) of a model drug curcumin (CUR) were developed by embedding traces of environment-responsive fluorescent dyes into the crystalline lattices of CUR. The SDHNs glow, but the released dyes aggregate and quench spontaneously due to the aggregation-caused quenching (ACQ) effect. Following intravenous administration into rats, a large fraction of CUR nanocrystals are cleared from blood rapidly and accumulate mainly in liver and lung. A small fraction circulate in blood for at least 48 h. Long circulating might be attributable to the surface coating with poloxamer 188, a stabilizer used during preparation; nevertheless, the ultimate fate of nanocrystals ends in reticulo-endothelial organs and tissues. It is implied that parenteral delivery provide sustained release and prolonged pharmacological efficacy, but concomitantly raise concerns of local toxicity in vital organs and tissues, especially when the active ingredients are highly toxic.

Self-discriminating fluorescent hybrid nanocrystals: efficient and accurate tracking of translocation via oral delivery

The in vivo fate of nanocrystals is a controversial topic, i.e. dissolving versus integral absorption through the intestinal membrane. This is due to the lack of functional strategies to identify integral nanocrystals. In this study, the in vivo fate of quercetin hybrid nanocrystals (QT-HNCs) via the oral route is explored by physically embedding an environment-responsive probe in the crystal lattices of quercetin. The specific property of the probe is the water-initiated aggregation-caused quenching (ACQ) ability, by which integral QT-HNCs can be self-discriminated. Instead of dissolving instantly, QT-HNCs can be retained in the gastrointestinal tract for 12-16 h, and can then be absorbed and distributed into various organs with the liver as the primary terminal. The ileum provides better absorption than the jejunum. Cellular studies prove that both trans-epithelial and M cell-mediated routes are involved in the absorption of integral QT-HNCs, which may be impeded by the mucous layer. Moreover, the particle size affects the in vivo behavior and the ex vivo cellular interaction of QT-HNCs, with moderate size, such as 550 nm, being preferred. The results not only validate the idea of using ACQ fluorophores for bioimaging of integral nanocrystals but also support the intestinal absorption of nanocrystals.