Formulation of simvastatin chitosan nanoparticles for controlled delivery in bone regeneration: Optimization using Box-Behnken design, stability and in vivo study

In silico screening and validation of natural compounds with fabrication and characterization of a lead compound-loaded chitosome for targeting lung fibrosis

Lung fibrosis (LF) is a serious complication with very limited therapeutic options. This study aimed to find a potential compound for targeting LF and develop a chitosome formulation to minimize any inherent drawbacks of the compound and achieve effective drug delivery. In total, 79 natural compounds were screened using an in silico approach against five targeted proteins (3HMG, 6B8Y, 2FAP, 3CQU, and 3DK9). Amongst these, quercetin (QER) exhibited the best efficacy (-14.725 kcal mol-1) and ΔG average (-86.45 ± 6.24) kcal mol-1 against the TGF-β receptor (PDB ID: 6B8Y). In vitro studies revealed that bleomycin-challenged A549 cells showed a fibrosis-like behaviour. Upon treatment with QER, the cell viability decreased owing to a reduction in the mitochondrial membrane potential and increased apoptosis. Furthermore, cell migration was inhibited with an improvement in cellular morphology. A QER-loaded chitosome formulation (QCF) was prepared through modified thin-film hydration. Variables were optimized using a response surface methodology Box-Behnken design. The QCF was further characterized on the basis of microscopic observation, zeta potential, entrapment efficiency, drug release and kinetics and by evaluating the effect of temperature on the QCF. Its zeta potential was +24.83 ± 0.32 mV, while microscopic observation showed that it had a spherical morphology with slightly rough surfaces after chitosan coating. Furthermore, the EE% was determined to be 81.75 ± 0.46%. The QCF also demonstrated a 74.23 ± 1.01% release of QER till 24 h, following Higuchi model kinetics. In conclusion, the in silico and in vitro cell line studies provided evidence for QER as a lead molecule for targeting LF. Moreover, the prepared QCF demonstrated sustained release with prospective QER targeted delivery. However, further extensive research is required to provide a promising strategy for the management of LF in the future.

Simvastatin modulates osteogenic differentiation in Stem Cells isolated from Apical Papilla

BACKGROUND

Simvastatin modulates numerous stem cell functions, including stemness maintenance and differentiation. The present study aimed to explore the effect of simvastatin on the osteogenic differentiation of Stem Cells isolated from Apical Papilla (SCAPs) in vitro.

METHODS

Cells were isolated from apical papilla, and mesenchymal stem cell features were characterised. Cells were treated with various concentrations of simvastatin (100-1,000 nM). The mRNA expression profile of simvastatin-treated SCAPs was examined using RNA sequencing technique. The osteogenic differentiation abilities were assessed. Alkaline phosphatase activity was determined. The mineralisation was visualised using Alizarin Red S and Von Kossa staining. The osteogenic marker gene expression was determined using a quantitative polymerase chain reaction.

RESULTS

RNA sequencing data demonstrated that simvastatin upregulated genes enriched in those pathways involving osteogenic differentiation, including the TGF-β signalling pathway, FoxO signalling pathway, and MAPK signalling pathway, while the downregulated genes were involved in pathways related to cell proliferation and apoptosis, for example, DNA replication, cell cycle, and p53 signalling pathway. Simvastatin promoted mineral deposition in a dose-dependent manner, corresponding with the upregulation of osteogenic marker genes namely OSX, DMP1, DSPP, and OCN. Pretreatment with TGF-β receptor inhibitor, SB431542, resulted in a moderately attenuated effect on simvastatin-induced mineralisation and osteogenic marker gene expression.

CONCLUSIONS

Simvastatin enhances osteogenic differentiation in SCAPs, potentially via TGF-β signalling, implicating its potential role as an adjunctive molecule in dental pulp healing and regeneration in vital pulp treatment approaches.

Glycyrrhizic Acid-Loaded Poloxamer and HPMC-Based In Situ Forming Gel of Acacia Honey for Improved Wound Dressing: Formulation Optimization and Characterization for Wound Treatment

The present study aims to formulate a stimuli-responsive in situ hydrogel system to codeliver acacia honey and glycyrrhizic acid for topical application that will aid in absorbing wound exudates, control microbial infestation, and produce angiogenic and antioxidant effects to accelerate wound healing. Therefore, both the natural active constituents were incorporated within an in situ hydrogel composed of poloxamer and hydroxypropyl methylcellulose (HPMC), where the concentrations of the polymers were optimized using Design-Expert software considering optimum values of the dependent variables, gelation temperature (34-37 °C), gelation time (<10 min), and the viscosity (2000-3500 cPs). The optimized formulation showed improved physicochemical properties such as mucoadhesiveness, porosity, swelling, and spreadability, which makes it suitable for wound application. Additionally, the in situ hydrogel exhibited potent in vitro and ex vivo antioxidant effects, in vitro antimicrobial activities, and ex ovo angiogenic effects. Furthermore, the optimized formulation was found to be nontoxic while tested in the HaCaT cell line and acute dermal irritation and corrosion study. The findings of the in vivo wound-healing studies in experimental animal models showed complete wound closure within 15 days of treatment and accelerated development of the extracellular matrix. In addition, the antioxidant, antimicrobial, angiogenic, and wound-healing properties of acacia honey and glycyrrhizic acid coloaded in situ hydrogel were also found to be promising when compared to the standard treatments. Overall, it can be concluded that the optimized stimuli-responsive in situ hydrogel containing two natural compounds could be an alternative to existing topical formulations for acute wounds.

Formulation and optimization of surfactant-modified chitosan nanoparticles loaded with cefdinir for novel topical drug delivery: Elevating wound healing efficacy with enhanced antibacterial properties

Burn wounds remain a significant global health concern, frequently exacerbated by bacterial infections that hinder healing and raise morbidity rates. Cefdinir, a third-generation cephalosporin antibiotic, is used to treat various conditions, but it has limitations such as low water solubility, limited bioavailability, and a short biological half-life. This study aimed to fabricate and optimize novel surfactant-based Cefdinir-loaded chitosan nanoparticles (CFD-CSNPs) for enhancing topical CFD delivery and efficacy in burn healing. Box-Behnken Design (BBD) was employed to develop optimized CFD-CSNPs using Design Expert® software, where the independent factors were chitosan concentration, chitosan: sodium tripolyphosphate ratio, pH, and surfactant type. Particle size PS, zeta potential ZP, Polydispersity index PDI, and entrapment efficiency EE% were evaluated as dependent factors. CFD-CSNPs were produced using the ionic gelation method. The optimized formula was determined and then examined for further in vitro and in vivo assessments. The optimized CFD-CSNPs exhibited acceptable PS, PDI, and ZP values. The EE% of CFD from CSNPs reached 57.89 % ± 1.66. TEM analysis revealed spherical morphology. In vitro release studies demonstrated a biphasic release profile up to (75.5 % ± 3.8) over 48 hrs. The optimized CFD-CSNPs showed improved antimicrobial efficacy against the tested microorganisms, exhibiting superior performance for both biofilm prevention and eradication. Enhanced wound healing activity was achieved by the optimized CFD-CSNPs in both in vitro and in vivo studies as confirmed by scratch wound assay and skin burn mice model. The current study advocates the efficacy of the innovative topical application of CFD-CSNPs for wound healing purposes and treatment of wound infections.

Loratadine Loaded Chitosan Tannic Acid Nanoparticles as Anti-Proliferative Agent Against Breast Cancer: In-silico, in-vitro and Cell Studies

Purpose

This study aims to prepare Loratadine-loaded chitosan/tannic acid nanoparticles (LOR-CS/TAN NPs) through ionic gelation to be used as an anti-proliferative agent to aid in overcoming breast cancer propagation.

Methods

First, in-silico virtual screening was carried out to select the most appropriate anti-histaminic drug based on its inhibitory effect on the H1-histamine receptor, resulting in the selection of Loratadine (LOR). Molecular interaction between LOR with chitosan (CS), a positively charged polymer, and hyaluronan, a negatively charged polymer, was investigated separately through molecular docking, leading to the selection of CS. Optimization was carried out using Box Behnken Design, with concentrations of CS, LOR, and tannic acid (TAN) as independent variables. The optimized nanoparticles were then examined through morphological and physicochemical studies. Cell studies against the MCF-7 breast cancer cell line were conducted to assess cytotoxicity, cell cycle, apoptosis, and necrosis.

Results

The optimum formulation was determined to be CS (0.2% w/v), LOR (1:2 weight ratio to CS), and TAN (1:30.6 weight ratio to CS). The optimized LOR-CS/TAN NPs exhibited a size of 283 nm, a polydispersity index (PDI) of 0.102, and an entrapment efficiency of 78%, along with sustained drug release for 24 hours. The results demonstrated that LOR-CS/TAN NPs possess higher anti-cancer activity compared to free LOR. This enhanced activity is attributed to the synergistic effect of the drug and the designed nanoparticle, particularly due to the presence of tannic acid.

Conclusion

In conclusion, Loratadine-loaded chitosan/tannic acid nanoparticles (LOR-CS/TAN NPs) demonstrated enhanced anti-cancer activity against the MCF-7 breast cancer cell line. The synergistic effect of Loratadine and the nanoparticle system, particularly due to the presence of tannic acid, resulted in higher cytotoxicity compared to free Loratadine. These findings suggest that LOR-CS/TAN NPs have significant potential as a novel anti-proliferative agent for breast cancer therapy.

Nicardipine-chitosan nanoparticles alleviate thioacetamide-induced acute liver injury by targeting NFκB/NLRP3/IL-1β signaling in rats: Unraveling new roles beyond calcium channel blocking

Liver inflammatory diseases are marked by serious complications. Notably, nicardipine (NCD) has demonstrated anti-inflammatory properties, but its benefits in liver inflammation have not been studied yet. However, the therapeutic efficacy of NCD is limited by its short half-life and low bioavailability. Therefore, we aimed to evaluate the potential of NCD-loaded chitosan nanoparticles (ChNPs) to improve its pharmacokinetic profile and hepatic accumulation. Four formulations of NCD-ChNPs were synthesized and characterized. The optimal formulation (NP2) exhibited a mean particle diameter of 172.6 ± 1.94 nm, a surface charge of +25.66 ± 0.93 mV, and an encapsulation efficiency of 88.86 ± 1.17 %. NP2 showed good physical stability as a lyophilized powder over three months. It displayed pH-sensitive release characteristics, releasing 77.15 ± 5.09 % of NCD at pH 6 (mimicking the inflammatory microenvironment) and 52.15 ± 3.65 % at pH 7.4, indicating targeted release in inflamed liver tissues. Pharmacokinetic and biodistribution studies revealed that NCD-ChNPs significantly prolonged NCD circulation time and enhanced its concentration in liver tissues compared to plain NCD. Additionally, the study investigated the protective effects of NCD-ChNPs in thioacetamide-induced liver injury in rats by modulating the NFκB/NLRP3/IL-1β signaling axis. NCD-ChNPs effectively inhibited NFκB activation, reduced NLRP3 inflammasome activation, and subsequent release of IL-1β, which correlated with improved hepatic function and reduced inflammation and oxidative stress. These findings highlight the potential of NCD-ChNPs as a promising nanomedicine strategy for the treatment of liver inflammatory diseases, warranting further investigation into their clinical applications, particularly in hypertensive patients with liver inflammatory conditions.

Quality-by-design-engineered mitochondrial targeted nanoparticles for glioblastoma therapy

Glioblastoma (GB, IDH-wildtype) constitutes the most aggressive primary malignant neoplasm with limited treatment modalities due to the blood-brain barrier (BBB) often restricting drug delivery. It also has an overall low survival rate with no curative solution, reinforcing the need for innovative formulation development for effective management of GB. This study explores a novel approach using triphenylphosphonium (TPP+)-conjugated chitosan nanoparticles for targeted mitochondrial delivery of temozolomide (TMZ) to GB cells. The conjugated nanoparticles were designed to leverage chitosan's biocompatibility and TPP's mitochondrial targeting ability. TMZ-loaded chitosan nanoparticles were systematically developed and optimized employing a Quality-by-Design (QbD) approach with a screening of factors (Taguchi design) followed by optimization (Box-Behnken design). The optimized nanoparticles had an average particle size of 138.1 ± 5 nm, PDI of 0.242 ± 0.04, and entrapment efficiency of 93.59 ± 3%. Further, a conjugate chitosan-TPP+ (CS-TPP+) was synthesized and validated, employing varied techniques such as NMR, FTIR, HPLC, zeta potential, and EDAX analysis. In vitro drug release in pH 5 phosphate buffer showed a sustained release for nanoparticulate formulations compared to the free drug solution further indicating that conjugation did not alter the release pattern of nanoparticles. With regards to intranasal delivery of the formulation, an ex vivo study carried out on goat nasal mucosa demonstrated greater retention of conjugated chitosan nanoparticles on nasal mucosa than free drug solution, and a mucin interaction study also corroborated this finding. In vitro cell line studies indicated nanoparticles' cytotoxic potential compared to TMZ solution. Overall, this study highlights the potential of TPP+-conjugated chitosan nanoparticles developed strategically for the targeted delivery of TMZ to mitochondria.

Application and Development of Electrospun Nanofiber Scaffolds for Bone Tissue Engineering

Nanofiber scaffolds have gained significant attention in the field of bone tissue engineering. Electrospinning, a straightforward and efficient technique for producing nanofibers, has been extensively researched. When used in bone tissue engineering scaffolds, electrospun nanofibers with suitable surface properties promote new bone tissue growth and enhance cell adhesion. Recent advancements in electrospinning technology have provided innovative approaches for scaffold fabrication in bone tissue engineering. This review comprehensively examines the utilization of electrospun nanofibers in bone tissue engineering scaffolds and evaluates the relevant literature. The review begins by presenting the fundamental principles and methodologies of electrospinning. It then discusses various materials used in the production of electrospun nanofiber scaffolds for bone tissue engineering, including natural and synthetic polymers, as well as certain inorganic materials. The challenges associated with these materials are also described. The review focuses on novel electrospinning techniques for scaffold construction in bone tissue engineering, such as multilayer nanofibers, multifluid electrospinning, and the integration of electrospinning with other methods. Recent advancements in electrospinning technology have enabled the fabrication of precisely aligned nanofiber scaffolds with nanoscale architectures. These innovative methods also facilitate the fabrication of biomimetic structures, wherein bioactive substances can be incorporated and released in a controlled manner for drug delivery purposes. Moreover, they address issues encountered with traditional electrospun nanofibers, such as mechanical characteristics and biocompatibility. Consequently, the development and implementation of novel electrospinning technologies have revolutionized scaffold fabrication for bone tissue engineering.

Rutin-Loaded Transethosomal Gel for Topical Application: A Comprehensive Analysis of Skin Permeation and Antimicrobial Efficacy

This study conducts a systematic investigation of the creation and optimization of a rutin-loaded transethosome intended for topical use. The formulation's characteristics were thoroughly assessed for vesicle size (160.45 ± 1.98 nm), polydispersity index (0.235 ± 0.067), and zeta potential (-22.89 mV), with an entrapment efficiency and drug loading of 89.99 ± 1.55% and 8.9 ± 2.11%, respectively, and found to have a spherical shape by the use of transmission electron microscopy. The conversion to a gel suitable for application on the skin was carried out. The drug release form Opt-RUT-TE formulation (73.61 ± 2.55%) was significantly higher than that of release form RUT-suspension (34.52 ± 1.19%). The drug that permeated the skin from Opt-RUT-TEG (935.25 ± 10.49 μg/cm2) was significantly higher than the permeability from RUT-Suspension gel (522.57 ± 6.79 μg/cm2). Notably, tape stripping analysis revealed that the Opt-RUT-TE gel effectively penetrated the skin layers, with a higher concentration observed in the epidermis-dermis than in the RUT-suspension gel. The transethosomal gel exhibited favorable characteristics, highlighting its capacity to efficiently permeate the skin and suppress the growth of microorganisms, and Opt-RUT-TEG showed a higher microorganism inhibition zone (Gram-positive bacteria) than that of RUT-suspension gel. The investigation highlights the significant therapeutic possibilities of rutin in a transethosomal gel formulation for treating dermatological diseases by improving skin permeability and exhibiting antibacterial effects.

BMSCs-laden mechanically reinforced bioactive sodium alginate composite hydrogel microspheres for minimally invasive bone repair

Minimally invasive, efficient, and satisfactory treatment for irregular and lacunar bone defects is still a challenge. Alginate hydrogels serve as promising stem cell (SC) delivery systems for bone regeneration but are limited by low cellular viability, poor osteogenic differentiation, and insufficient mechanical support. Herein, we developed a BMSCs-laden mechanically reinforced bioactive sodium alginate composite hydrogel microspheres (BCHMs) system via a microfluidic method that possesses 1) a uniform size and good injectability to meet clinical bone defects with complex shapes, 2) high cellular viability maintenance and further osteogenic induction capacity, and 3) improved mechanical properties. As the main matrix, the sodium alginate hydrogel maintains the high viability of encapsulated BMSCs and efficient substance exchange. Enhanced mechanical properties and osteogenic differentiation of the BCHMs in vitro were observed with xonotlite (Ca6Si6O17(OH)2, CSH) nanowires incorporated. Furthermore, BCHMs with 12.5 % CSH were injected into rat femoral bone defects, and satisfactory in situ regeneration outcomes were observed. Overall, it is believed that BCHMs expand the application of polysaccharide science and provide a promising injectable bone substitute for minimally invasive bone repair.

Statins-Their Role in Bone Tissue Metabolism and Local Applications with Different Carriers

Statins, widely prescribed for lipid disorders, primarily target 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase competitively and reversibly, resulting in reduced low-density lipoprotein cholesterol (LDL-C). This mechanism proves effective in lowering the risk of lipid-related diseases such as ischemic cerebrovascular and coronary artery diseases. Beyond their established use, statins are under scrutiny for potential applications in treating bone diseases. The focus of research centers mainly on simvastatin, a lipophilic statin demonstrating efficacy in preventing osteoporosis and aiding in fracture and bone defect healing. Notably, these effects manifest at elevated doses (20 mg/kg/day) of statins, posing challenges for systematic administration due to their limited bone affinity. Current investigations explore intraosseous statin delivery facilitated by specialized carriers. This paper outlines various carrier types, characterizing their structures and underscoring various statins' potential as local treatments for bone diseases.

A personalized biomimetic dual-drug delivery system via controlled release of PTH1-34 and simvastatin for in situ osteoporotic bone regeneration

Patients with osteoporosis often encounter clinical challenges of poor healing after bone transplantation due to their diminished bone formation capacity. The use of bone substitutes containing bioactive factors that increase the number and differentiation of osteoblasts is a strategy to improve poor bone healing. In this study, we developed an in situ dual-drug delivery system containing the bone growth factors PTH1-34 and simvastatin to increase the number and differentiation of osteoblasts for osteoporotic bone regeneration. Our system exhibited ideal physical properties similar to those of natural bone and allowed for customizations in shape through a 3D-printed scaffold and GelMA. The composite system regulated the sustained release of PTH1-34 and simvastatin, and exhibited good biocompatibility. Cell studies revealed that the composite system reduced osteoblast death, and promoted expression of osteoblast differentiation markers. Additionally, by radiographic analysis and histological observation, the dual-drug composite system demonstrated promising bone regeneration outcomes in an osteoporotic skull defect model. In summary, this composite delivery system, comprising dual-drug administration, holds considerable potential for bone repair and may serve as a safe and efficacious therapeutic approach for addressing bone defects in patients with osteoporosis.

Development and optimization of in-situ gel containing chitosan nanoparticles for possible nose-to-brain delivery of vinpocetine

Vinpocetine (VIN), a derivative of vincamine found in the vinca plant, widens blood vessels in the brain and has been shown to improve cognitive function, memory, and cerebrovascular disorders. Nevertheless, the clinical utility of VIN is constrained by factors such as low oral bioavailability owing to the first-pass metabolism that often demands frequent dosing of 3-4 tablets/day. In this regard, the present work aimed to develop VIN-loaded chitosan nanoparticles (VIN-CH-NPs) to surmount these limitations and in view to enhance delivery to the brain of VIN by minimizing systemic exposure. The chitosan (CH) nanoparticles (NP) were developed by ionotropic gelation technique employing tripolyphosphate (TPP) as a cross-linking agent. Employing Design of Experiments (DoE), the effect of CH and TPP concentrations and stirring speed were systematically optimized using Box Behnken design (BBD). The optimized batch of nanoparticles displayed a particle size, zeta potential, entrapment efficiency, and drug loading of 130.6 ± 8.38 nm, +40.81 ± 0.11 mV, 97.56 ± 0.04 %, and 61 ± 0.89 %, respectively. Fourier Transform Infrared Spectroscopy indicated the chemical integrity of the drug ruling out the interaction between the VIN and excipients used. DSC and PXRD data indicated that reduction of the crystallinity of VIN in the chitosan matrix. These VIN-CH-NPs manifested good stability, exhibiting an almost spherical morphology. To mitigate rapid mucociliary clearance upon intranasal administration, the optimized VIN-CH-NPs were incorporated into thermosensitive in situ gel (VIN-CHN-ISG). It was observed that the in-situ gel loaded with nanoparticles was opalescent with a pH level of 5.3 ± 0.38. It was also noted that the gelation temperature was 32 ± 0.89 °C, and the gelation time was approximately 15 s. The drug delivery to the brain through the nasal application of optimized VIN-NPs in situ gel was assessed in rats. The results indicated significant nasal application of the in-situ gel nearly doubled the Cmax (P < 0.05) and AUC0-t (P < 0.05) in the brain compared to oral administration. Nasal administration improved drug delivery to the brain by reducing systemic exposure to VIN. A histopathological study of the nasal mucosa revealed no irritation or toxicity, making it safe for nasal administration. These findings suggest that the developed NPs in-situ gel effectively targeted vinpocetine to the brain through the nasal pathway, providing a potential therapeutic strategy for managing Alzheimer's disease.

Antimicrobial and anti-SARS-CoV-2 activities of smart daclatasvir-chitosan/gelatin nanoparticles-in-PLLA nanofibrous medical textiles; in vitro, and in vivo study

This study aims at the development of electrospun polylactic acid nanofibers (PLLA NFs) incorporating smart daclatasvir-loaded chitosan gelatin nanoparticles to be used as medical textiles. First, smart nanoparticles were prepared through ionic gelation and optimized using Design Expert® software where daclatasvir (DAC), chitosan (CS), and gelatin (GL) amounts were selected to be the independent variables. DAC was used owing to its reported Anti-SARS-CoV-2 activity, CS was chosen due to its antimicrobial activity and GL was used owing to its sensitivity to be hydrolyzed upon exposure to Papain-like protease enzyme (PLpro). The optimum DAC-CS/TAN NPs possessed 109 nm size and 94.44 % entrapment efficiency in addition to sustained drug release for 14 days. Furthermore, upon exposure to PLpro, smart DAC-CS/GL NPs released the whole DAC amount within 3 h. Then, DAC-CS/GL NPs were incorporated within PLLA NFs through electrospinning. Swellability was found to increase gradually reflecting the controlled release of DAC from nanofibers within 3 weeks. Cell viability assessments using human fibroblasts showed that the developed nanofibers possess high biocompatibility. An in-vivo animal model for skin irritation was carried out for two weeks where visual inspection and histopathological investigations showed that neither edema nor erythema were observed.

Attributes of Nanomaterials and Nanotopographies for Improved Bone Tissue Engineering and Regeneration

Bone tissue engineering (BTE) is a multidisciplinary area that can solve the limitation of conventional grafting methods by developing viable and biocompatible bone replacements. The three essential components of BTE, i.e., Scaffold material and Cells and Growth factors altogether, facilitate support and guide for bone formation, differentiation of the bone tissues, and enhancement in the cellular activities and bone regeneration. However, there is a scarcity of the appropriate materials that can match the mechanical property as well as functional similarity to native tissue, considering the bone as hard tissue. In such scenarios, nanotechnology can be leveraged upon to achieve the desired aspects of BTE, and that is the key point of this review article. This review article examines the significant areas of nanotechnology research that have an impact on regeneration of bone: (a) scaffold with nanomaterials helps to enhance physicochemical interactions, biocompatibility, mechanical stability, and attachment; (b) nanoparticle-based approaches for delivering bioactive chemicals, growth factors, and genetic material. The article begins with the introduction of components and healing mechanisms of bone and the factors associated with them. The focus of this article is on the various nanotopographies that are now being used in scaffold formation, by describing how they are made, and how these nanotopographies affect the immune system and potential underlying mechanisms. The advantages of 4D bioprinting in BTE by using nanoink have also been mentioned. Additionally, we have investigated the importance of an in silico approach for finding the interaction between drugs and their related receptors, which can help to formulate suitable systems for delivery. This review emphasizes the role of nanoscale approach and how it helps to increase the efficacy of parameters of scaffold as well as drug delivery system for tissue engineering and bone regeneration.

Lactosylated Chitosan Nanoparticles Potentiate the Anticancer Effects of Telmisartan In Vitro and in a N-Nitrosodiethylamine-Induced Mice Model of Hepatocellular Carcinoma

Hepatocellular carcinoma (HCC) is the leading cause of cancer-related mortality worldwide. Telmisartan (TLM), a BSC class II drug, has been reported to have antiproliferative activity in HCC. However, its therapeutic activity is limited by poor bioavailability and unpredictable distribution. This work aimed to enhance TLM's liver uptake for HCC management through passive and active targeting pathways utilizing chitosan nanoparticles decorated with lactose (LCH NPs) as a delivery system. In vitro cell cytotoxicity and cellular uptake studies indicated that TLM-LCH NPs significantly (p < 0.05) enhanced the antiproliferative activity and cellular uptake percentage of TLM. In vivo bioavailability and liver biodistribution studies indicated that TLM-LCH NPs significantly (p < 0.05) enhanced TLM concentrations in plasma and the liver. The relative liver uptake of TLM from TLM-LCH NPs was 2-fold higher than that of unmodified NPs and 5-fold higher than that of plain TLM suspension. In vivo studies of a N-nitrosodiethylamine-induced HCC model revealed that administration of TLM through LCH NPs improved liver histology and resulted in lower serum alpha-fetoprotein (AFP), matrix metalloproteinase 2 (MMP-2), vascular endothelial growth factor (VEGF) levels, and liver weight index compared to plain TLM and TLM-loaded unmodified NPs. These results reflected the high potentiality of LCH NPs as a liver-targeted delivery system for TLM in the treatment of HCC.

Chitosan nanoparticles as a smart nanocarrier for gefitinib for tackling lung cancer: Design of experiment and in vitro cytotoxicity study

Due to its poor solubility and systemic side effects, gefitinib (Gef) has limited application in treatment of lung cancer. In this study, we used design of experiment (DOE) tools to gain the necessary knowledge for the synthesis of high-quality gefitinib loaded chitosan nanoparticles (Gef-CSNPs) capable of delivering and concentrating Gef at A549 cells, thereby increasing therapeutic effectiveness while decreasing adverse effects. The optimized Gef-CSNPs were characterized by SEM, TEM, DSC, XRD, and FTIR analyses. The optimized Gef-CSNPs had a particle size of 158±3.6 nm, an entrapment efficiency of 93±1.2 %, and a release of 97±0.6 % after 8 h. The in vitro cytotoxicity of the optimized Gef-CSNPs was found to be significantly higher than pure Gef (IC50 = 10.08 ± 0.76 μg/mL and IC50 = 21.65 ± 0.32 μg/mL), respectively. In the A549 human cell line, the optimized Gef-CSNPs formula outperformed pure Gef in terms of cellular uptake (3.286 ± 0.12 μg/mL and 1.777 ± 0.1 μg/mL) and apoptotic population (64.82 ± 1.25 % and 29.38 ± 1.11 %), respectively. These findings explain why researchers are so interested in using natural biopolymers to combat lung cancer, and they paint an optimistic picture of their potential as a promising tool in the fight against lung cancer.

SARS-CoV-2 Papain-like Protease Responsive ZnO/Daclatasvir-Loaded Chitosan/Gelatin Nanofibers as Smart Antimicrobial Medical Textiles: In Silico, In Vitro and Cell Studies

A significant number of deaths are reported annually worldwide due to microbial and viral infections. The development of protective medical textiles for patients and healthcare professionals has attracted many researchers' attention. Therefore, this study aims to develop smart drug-eluting nanofibrous matrices to be used as a basic material for medical textile fabrication. First, chitosan/gelatin nanofibers were selected as the basic material owing to the wide antimicrobial activity of chitosan and the capability of gelatin to be hydrolyzed in the abundance of the papain-like protease (PLpro) enzyme secreted by SARS-CoV-2. Daclatasvir (DAC), an NS5A inhibitor, was selected as the model drug based on in silico studies where it showed high anti-SARS-CoV-2 potential compared to FDA-approved references. Due to their reported antimicrobial and antiviral activities, ZnO NPs were successfully prepared and incorporated with daclatasvir in chitosan/gelatin nanofibrous matrices through electrospinning. Afterward, an in vitro release study in a simulated buffer revealed the controlled release of DAC over 21 days from the nanofibers compared to only 6 h for free DAC. On the other hand, the abundance of PLpro induced the complete release of DAC from the nanofibers in only 4-8 h. Finally, the nanofibers demonstrated a wide antimicrobial activity against S. aureus, E. coli, and C. albicans.

Development of nanostructured formulation from naringenin and silk fibroin and application for inhibition of lipoxygenase (LOX)

A simple low-energy method was used to obtain polymeric nanoparticles containing silk fibroin (SF), fatty butyl esters (oily phase) and the flavonoid naringenin. Experimental planning (Box-Behnken) was applied to investigate the optimal conditions for three factors (variation of the concentrations of SF, naringenin and fatty butyl ester) at three levels, with evaluation of particle size, polydispersity index (PDI) and zeta potential (ZP) as responses. The results showed that the polymeric particle was formed with sizes of 179.6 to 633.9 nm, PDI of 0.33 to 0.77 and ZP of -60.4 to -38.8 mV. The best responses under the optimized conditions (Nari-SF 9 and 15) were characterized through transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR), visible ultraviolet (UV-vis) and fluorescence, which confirmed that coated nanoparticles had been obtained. It was shown that the nanoformulation had excellent stability, the bioavailability of naringenin had been improved through use of the biopolymer and high inhibition of the enzyme lipoxygenase had been achieved in vitro.

Telmisartan-Loaded Lactosylated Chitosan Nanoparticles as a Liver Specific Delivery System: Synthesis, Optimization and Targeting Efficiency

Hepatocellular carcinoma (HCC) has a significant economic impact and a high mortality rate. Telmisartan (TLM) is a potential therapy for HCC, but it has a limited scope in drug delivery due to unpredictable distribution and poor bioavailability. The objective of this study was to prepare, design, and in vitro evaluate lactose-modified chitosan nanoparticles (LCH NPs) as a liver-targeted nanocarrier for TLM with the potential to offer a promising HCC therapy. The combination of chitosan with lactose was successfully attained using the Maillard reaction. TLM-LCH NPs were prepared, characterized, and optimized with the developed 2³ full factorial design. The optimized formulation (F1) was in vitro and in vivo characterized. LCH was synthesized with an acceptable yield of 43.8 ± 0.56%, a lactosylation degree of 14.34%, and a significantly higher aqueous solubility (6.28 ± 0.21 g/L) compared to native chitosan (0.25 ± 0.03 g/L). In vitro characterization demonstrated that, F1 had a particle size of 145.46 ± 0.7 nm, an entrapment efficiency of 90.21 ± 0.28%, and a surface charge of + 27.13 ± 0.21 mV. In vitro TLM release from F1 was most consistent with the Higuchi model and demonstrated significantly higher release at pH 5.5. Moreover, a significantly higher ratio of liver to plasma concentration was observed with TLM-LCH NPs compared to plain TLM and unmodified TLM-NPs. The obtained results nominate TLM-LCH NPs as a promising carrier for enhancing liver targeting of TLM in treatment of HCC.

Nanoencapsulation of garlic essential oil using chitosan nanopolymer and its antifungal and anti-aflatoxin B1 efficacy in vitro and in situ

The present study investigated the comparative efficacy of garlic essential oil (GEO) and its nanoencapsulated within chitosan nanomatrix (GEO-CSNPs) as a novel preservative for the protection of stored food commodities from fungal infestations, aflatoxin B1 (AFB1) contamination and lipid peroxidation against a toxigenic strain of Aspergillus flavus. GC-MS examination of GEO showed the presence of allyl methyl tri-sulfide (23.10 %) and diallyl sulfide (19.47 %) as the major components. GEO-CSNPs were characterized through TEM micrograph, DLS, XRD, and FTIR instrumentation. During the in-vitro investigation, GEO-CSNPs at 1.0 μL/mL dose completely inhibited the growth of A. flavus while preventing the synthesis of AFB₁ at 0.75 μL/mL compared to the pure GEO. The biochemical analysis reveals that A. flavus exposed to GEO-CSNPs significantly changed its ergosterol level, ions leakage, mitochondrial membrane potential (MMP), and antioxidant system. Additionally, GEO-CSNPs exhibited enhanced antioxidant activity against DPPH compared with GEO. Likewise, during in-situ experiments on A. hypogea GEO-CSNPs MIC and 2 MIC concentration prohibited fungal development, AFB₁ synthesis, and lipid peroxidation or inflicting any negative impacts on germinating seeds. Overall, investigations concluded that GEO-CSNPs could be used as a novel preservative agent to improve the shelf life of stored food commodities.

Timolol-loaded ethosomes for ophthalmic delivery: Reduction of high intraocular pressure in vivo

The beta-adrenoceptor blocker timolol maleate (TML) is a commonly used pharmaceutical agent for the management of glaucoma. Conventional eye drops have limitations due to biological or pharmaceutical factors. Therefore, TML-loaded ethosomes have been designed to mitigate these restrictions and give a viable solution for reducing elevated intraocular pressure (IOP). The ethosomes were prepared using the thin film hydration method. Integrating the Box-Behnken experimental strategy, the optimal formulation was identified. The physicochemical characterization studies were performed on the optimal formulation. Then, in vitro release and ex vivo permeation studies were conducted. The irritation assessment was also carried out with Hen's Egg Test-Chorioallantoic Membrane model (HET-CAM), and in vivo evaluation of the IOP lowering effect was also performed on rats. The physicochemical characterization studies demonstrated that the components of the formulation were compatible with each other. The particle size, zeta potential, and encapsulation efficiency (EE%) were found as 88.23 ± 1.25 nm, -28.7 ± 2.03 mV, and 89.73 ± 0.42 %, respectively. The in vitro drug release mechanism was found as Korsmeyer-Peppas kinetics (R²=0.9923). The HET-CAM findings verified the formulation's eligibility for biological applications. The IOP measurements revealed no statistical difference (p>0.05) between the once-a-day application of the optimal formulation and the three-times-a-day application of the conventional eye drop. A similar pharmacological response was observed at lowered application frequencies. Therefore, it was concluded that the novel TML-loaded ethosomes could be a safe and efficient alternative for glaucoma treatment.

Effects of Hyperlipidemia on Osseointegration of Dental Implants and Its Strategies

Hyperlipidemia refers to the abnormal increase in plasma lipid level exceeding the normal range. At present, a large number of patients require dental implantation. However, hyperlipidemia affects bone metabolism, promotes bone loss, and inhibits the osseointegration of dental implants through the mutual regulation of adipocytes, osteoblasts, and osteoclasts. This review summarized the effects of hyperlipidemia on dental implants and addressed the potential strategies of dental implants to promote osseointegration in a hyperlipidemic environment and to improve the success rate of dental implants in patients with hyperlipidemia. We summarized topical drug delivery methods to solve the interference of hyperlipidemia in osseointegration, which were local drug injection, implant surface modification and bone-grafting material modification. Statins are the most effective drugs in the treatment of hyperlipidemia, and they also encourage bone formation. Statins have been used in these three methods and have been found to be positive in promoting osseointegration. Directly coating simvastatin on the rough surface of the implant can effectively promote osseointegration of the implant in a hyperlipidemic environment. However, the delivery method of this drug is not efficient. Recently, a variety of efficient methods of simvastatin delivery, such as hydrogels and nanoparticles, have been developed to boost bone formation, but few of them were applied to dental implants. Applicating these drug delivery systems using the three aforementioned ways, according to the mechanical and biological properties of materials, could be promising ways to promote osseointegration under hyperlipidemic conditions. However, more research is needed to confirm.

Sunlight-driven antibacterial activity of a novel zinc oxide quantum dot and its optimization using Box-Behnken design-A medicament for communicable disease protective wearables

The current study focuses on microwave-assisted zinc oxide quantum dots synthesis (ZnO-QDs) from zinc oxide bionanocomposite (ZnO-BC) preparation. The novelty lies in the preparation of ZnO-QDs, since the natural elements present in ZnO-BC itself acted as a surface penetration enhancer without using any chemical agent. Under ultraviolet (UV) light ZnO-QDs emitted a blue glow, confirming the fluorescence property. Using Box-Behnken design, the experimental factors of ZnO-QDs were optimized, yielding a positive response of 350 nm absorbance and these results also matched with the UV-visible spectroscopy characterization studies of ZnO-QDs. Using Escherichia coli, the antibacterial activity of ZnO-BC in comparison to ZnO-QDs was determined using the well diffusion method and an inhibition zone ranging from 11 to 23 mm and in the broth assay the OD values were reduced by almost seven and 10 times for ZnO-BC and ZnO-QDs, respectively, when compared to the control (untreated). The antibacterial activity demonstrated that our newly prepared BC and its QDs have superior activity when compared to the standard antibiotics such as ampicillin. This type of nanomaterial can be used as a new bioactive natural material with light-assisted activity for antibacterial coatings in the manufacture of personal protective equipment.

Potential Oral Anticancer Therapeutic Agents of Hexahydrocurcumin-Encapsulated Chitosan Nanoparticles against MDA-MB-231 Breast Cancer Cells

Hexahydrocurcumin-encapsulated chitosan nanoparticles (HHC-CS-NPs) were formulated by oil-in-water emulsification and ionotropic gelation and optimized using the Box-Behnken design. The particle size, zeta potential, and encapsulation efficiency of the optimized HHC-CS-NPs were 256 ± 14 nm, 27.3 ± 0.7 mV, and 90.6 ± 1.7%, respectively. The TEM analysis showed a spherical shape and a dense structure with a narrow size distribution. The FT-IR analysis indicated no chemical interaction between the excipients and the drugs in the nanoparticles, but the existence of the drugs was molecularly dispersed in the nanoparticle matrices. The drug release profile showed a preliminary burst release followed by a sustained release under simulated gastrointestinal (GI) and physiological conditions. A stability study suggested that the HHC-CS-NPs were stable under UV light, simulated GI, and body fluids. The in vitro bioaccessibility and bioavailability of the HHC-CS-NPs were 2.2 and 6.1 times higher than those of the HHC solution, respectively. The in vitro evaluation of the antioxidant, anti-inflammatory, and cytotoxic effects of the optimized HHC-CS-NPs demonstrated that the CS-NPs significantly improved the biological activities of HHC in radical scavenging, hemolysis protection activity, anti-protein denaturation, and cytotoxicity against MDA-MB-231 breast cancer cells. Western blot analysis showed that the apoptotic protein expression of Bax, cytochrome C, caspase-3, and caspase-9, were significantly up-regulated, whereas the anti-apoptotic protein Bcl-2 expression was down-regulated in the HHC-CS-NP-treated cells. Our findings suggest that the optimized HHC-CS-NPs can be further developed as an efficient oral treatment for breast cancer.

Nanotechnology for Targeted Drug Delivery to Treat Osteoporosis

Bone diseases such as rheumatoid arthritis, Paget's disease, and osteoporosis cause mortality and mobility limits. Nanomedicine and nano delivery systems have been utilised to deliver active drug moiety to the precisely targeted site in a controlled manner, and it serves as a means of diagnostic tools. The utilisation of nanomedicine is expanding vigorously for assured targeting and efficient drug delivery. Nanotechnology offers various advantages, such as site-specific targeting, precise drug release kinetics, and improved bone mineral density. Recent medications available for osteoporosis are not viable due to the adverse effects associated with them and low patient compliance. There is an urgent need to develop biocompatible and appropriate drug delivery nanocarriers such as nanoparticles, liposomes, hydrogels, dendrimers, micelles, mesoporous particles, etc. These carriers enhance drug delivery and therapeutic effectiveness in bone tissues. The use of nanotechnology is also associated with toxicity. This article presents the review of various reports on nanocarrier systems and biologics for the treatment of osteoporosis. It aims to provide researchers with a clue for inventing a new drug delivery system with site-specific targeting for the treatment of osteoporosis.

Transferrin decorated PLGA encumbered moxifloxacin nanoparticles and in vitro cellular studies

PURPOSE

Complicated intra-abdominal infection (cIAI) management involves administering antibiotics that destroy the cell wall and the genesis of bacterial lipopolysaccharide (LPS). During the infectious state, the expression of transferrin receptors upregulates on the intestinal epithelial cells, which are considered the site of infection. In the present research, transferrin decorated poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) encapsulated moxifloxacin (MOX) were developed for possible targeting of the receptors in the colon.

SIGNIFICANCE

This study will explore more about the incorporation of transferrin as effective coating material in targeted drug delivery.

METHODS

Nanoparticles were prepared using nano-emulsification and surface modification with transferrin was done by layer-by-layer methodology and evaluated by powder X-ray diffraction (PXRD), differential scanning calorimeter (DSC), FTIR, SEM, antibacterial activity, and cellular uptake studies.

RESULTS

The formulated NPs exhibit a size of ≈170 nm, PDI ≈ 0.25, zeta potential ≈-4.0 mV, drug loading ≈ 6.8%, and entrapment efficiency of 82%. Transferrin-decorated NPs exhibit tailored release for almost 12 h and in vitro antibacterial activity for 14 h. The cellular uptake studies were done on a RAW264.7 cell line for better determination of transferrin uptake of fabricated NPs.

CONCLUSION

The above study circumvents around the preparation of transferrin decorated PLGA encumbered MOX NPs intended for cIAI-induced sepsis. PLGA NPs provide tailored release of MOX with primary burst and followed by sustained release. These observations confines with antibacterial activity studies. The prepared transferrin-coated NPs were stable and effectively uptaken by RAW264.7 cells. However, future studies include the preclinical investigation of these NPs in sepsis-induced murine models.

Molecular Complex of HSIM-loaded Polymeric Nanoparticles: Potential Carriers in Osteoporosis

BACKGROUND

Statins, especially simvastatin promote bone formation by stimulating the activity of osteoblasts and suppressing osteoclast activity via the BMP-Smad signaling pathway. Statins present the liver first-pass metabolism. This study attempts to fabricate and evaluate simvastatin functionalized hydroxyapatite encapsulated in poly(lactic-co-glycolic) acid (PLGA) nanoparticles (HSIM-PLGA NPs) administered subcutaneously with sustained release properties for effective management of osteoporosis.

METHODS

Simvastatin functionalized hydroxyapatite (HSIM) was prepared by stirring and validated by docking studies, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). Further, HSIM-loaded PLGA nanoparticles (HSIM-PLGA NPs) were developed via the solvent emulsification method. The nanoparticles were evaluated for zeta potential, particle size, entrapment efficiency, stability studies, and in vitro drug release studies. in vitro binding affinity of nanoparticles for hydroxyapatite was also measured. Bone morphology and its effect on bone mineral density were examined by using a glucocorticoid-induced osteoporosis rat model.

RESULTS

The optimized nanoparticles were found to be amorphous and showed no drug-polymer interaction. The particle size of formulated nanoparticles varied from 196.8 ± 2.27nm to 524.8 ± 5.49 nm and the entrapment efficiency of nanoparticles varied from 41.9 ± 3.44% to 70.8 ± 4.46%, respectively. The nanoparticles showed sustained release behaviour (75% in 24 hr) of the drug followed by non-fickian drug release. The nanoparticles exhibited high binding affinity to bone cell receptors, increasing bone mineral density. A significant difference in calcium and phosphorous levels was observed in disease and treatment rats. Porous bone and significant improvement in porosity were observed in osteoporotic rats and treated rats, respectively (P < 0.05).

CONCLUSION

Bone-targeting nanoparticles incorporating functionalized simvastatin can target bone. Thus, in order to distribute simvastatin subcutaneously for the treatment of osteoporosis, the developed nanoparticles may act as a promising approach.

Chitosan-based scaffolds as drug delivery systems in bone tissue engineering

The bone tissue engineering approach for treating large bone defects becomes necessary when the tissue damage surpasses the threshold of the inherent regenerative ability of the human body. A myriad of natural biodegradable polymers and scaffold fabrication techniques have emerged in the last decade. Chitosan (CS) is especially attractive as a bone scaffold material to support cell attachment and proliferation and mineralization of the bone matrix. The primary amino groups in CS are responsible for properties such as controlled drug release, mucoadhesion, in situ gelation, and transfection. CS-based smart drug delivery scaffolds that respond to environmental stimuli have been reported to have a localized sustained delivery of drugs in the large bone defect area. This review outlines the recent advances in the fabrication of CS-based scaffolds as a pharmaceutical carrier to deliver drugs such as antibiotics, growth factors, nucleic acids, and phenolic compounds for bone tissue regeneration.

A nanoengineered topical transmucosal cisplatin delivery system induces anti-tumor response in animal models and patients with oral cancer

Despite therapeutic advancements, oral cavity squamous cell carcinoma (OCSCC) remains a difficult disease to treat. Systemic platinum-based chemotherapy often leads to dose-limiting toxicity (DLT), affecting quality of life. PRV111 is a nanotechnology-based system for local delivery of cisplatin loaded chitosan particles, that penetrate tumor tissue and lymphatic channels while avoiding systemic circulation and toxicity. Here we evaluate PRV111 using animal models of oral cancer, followed by a clinical trial in patients with OCSCC. In vivo, PRV111 results in elevated cisplatin retention in tumors and negligible systemic levels, compared to the intravenous, intraperitoneal or intratumoral delivery. Furthermore, PRV111 produces robust anti-tumor responses in subcutaneous and orthotopic cancer models and results in complete regression of carcinogen-induced premalignant lesions. In a phase 1/2, open-label, single-arm trial (NCT03502148), primary endpoints of efficacy (≥30% tumor volume reduction) and safety (incidence of DLTs) of neoadjuvant PRV111 were reached, with 69% tumor reduction in ~7 days and over 87% response rate. Secondary endpoints (cisplatin biodistribution, loco-regional control, and technical success) were achieved. No DLTs or drug-related serious adverse events were reported. No locoregional recurrences were evident in 6 months. Integration of PRV111 with current standard of care may improve health outcomes and survival of patients with OCSCC.

Thermosensitive chitosan/poly(N-isopropyl acrylamide) nanoparticles embedded in aniline pentamer/silk fibroin/polyacrylamide as an electroactive injectable hydrogel for healing critical-sized calvarial bone defect in aging rat model

Thermosensitive nanoparticles with phase transition abilities have been considered as suitable materials in biomedical fields, especially drug delivery systems. Moreover, electroactive injectable hydrogels supporting bone regeneration of the elderly will highly be desired in bone tissue engineering applications. Herein, thermosensitive nanoparticles were fabricated using chitosan/poly(N-isopropyl acrylamide) for simvastatin acid delivery. The nanoparticles were incorporated into electroactive injectable hydrogels based on aniline pentamer/silk fibroin/polyacrylamide containing vitamin C. The nanoparticles had thermosensitive properties as simvastatin acid had higher release rates at 37 than 23 °C without significant burst release. The hydrogels also revealed an appropriate gelation time, stable mechanical and rheological characteristics, high water absorbency, and proper biodegradability. In vitro studies indicated that the hydrogel was biocompatible and nontoxic, especially those containing drugs. Implantation of the hydrogels containing both simvastatin acid and vitamin C into the critical calvarial bone defect of the aged rat also demonstrated significant enhancement of bone healing after 4 and 8 weeks post-implantation. We found that the electroactive injectable hydrogels containing thermosensitive nanoparticles exhibited great potential for treating bone defects in the elderly rats.

E. Gaafar P, Mousa MR, Fayez AM, Elsheikh MA. Novel Luteolin-Loaded Chitosan Decorated Nanoparticles for Brain-Targeting Delivery in a Sporadic Alzheimer's Disease Mouse Model: Focus on Antioxidant, Anti-Inflammatory, and Amyloidogenic Pathways

Preparation and evaluation of a non-invasive intranasal luteolin delivery for the management of cognitive dysfunction in Alzheimer's disease (AD) using novel chitosan decorated nanoparticles. Development of luteolin-loaded chitosomes was followed by full in vitro characterization. In vivo efficacy was evaluated using a sporadic Alzheimer's disease (SAD) animal model via intracerebroventricular injection of 3 mg/kg streptozotocin (ICV-STZ). Treatment groups of luteolin suspension and chitosomes (50 mg/kg) were then intranasally administered after 5 h of ICV-STZ followed by everyday administration for 21 consecutive days. Behavioral, histological, immunohistochemical, and biochemical studies were conducted. Chitosomes yielded promising quality attributes in terms of particle size (PS) (412.8 ± 3.28 nm), polydispersity index (PDI) (0.378 ± 0.07), Zeta potential (ZP) (37.4 ± 2.13 mv), and percentage entrapment efficiency (EE%) (86.6 ± 2.05%). Behavioral findings showed obvious improvement in the acquisition of short-term and long-term spatial memory. Furthermore, histological evaluation revealed an increased neuronal survival rate with a reduction in the number of amyloid plaques. Biochemical results showed improved antioxidant effects and reduced pro-inflammatory mediators' levels. In addition, a suppression by half was observed in the levels of both Aβ aggregation and hyperphosphorylated-tau protein in comparison to the model control group which in turn confirmed the capability of luteolin-loaded chitosomes (LUT-CHS) in attenuating the pathological changes of AD. The prepared nanoparticles are considered a promising safe, effective, and non-invasive nanodelivery system that improves cognitive function in SAD albino mice as opposed to luteolin suspension.

Functionalized chitosan nanoparticles for cutaneous delivery of a skin whitening agent: an approach to clinically augment the therapeutic efficacy for melasma treatment

The increase in the production of melanin level inside the skin prompts a patient-inconvenient skin color disorder namely; melasma. This arouses the need to develop efficacious treatment modalities, among which are topical nano-delivery systems. This study aimed to formulate functionalized chitosan nanoparticles (CSNPs) in gel form for enhanced topical delivery of alpha-arbutin as a skin whitening agent to treat melasma. Ionic gelation method was employed to prepare α-arbutin-CSNPs utilizing a 2⁴ full factorial design followed by In vitro, Ex vivo and clinical evaluation of the nano-dispersions and their gel forms. Results revealed that the obtained CSNPs were in the nanometer range with positive zeta potential, high entrapment efficiency, good stability characteristics and exhibited sustained release of α-arbutin over 24 h. Ex vivo deposition of CSNPs proved their superiority in accumulating the drug in deep skin layers with no transdermal delivery. DSC and FTIR studies revealed the successful amorphization of α-arbutin into the nanoparticulate system with no interaction between the drug and the carrier system. The comparative split-face clinical study revealed that α-arbutin loaded CSNPs hydrogels showed better therapeutic efficacy compared to the free drug hydrogel in melasma patients, as displayed by the decrease in: modified melasma area and severity index (mMASI) scores, epidermal melanin particle size surface area (MPSA) and the number of epidermal monoclonal mouse anti–melanoma antigen recognized by T cells-1 (MART-1) positive cells which proved that the aforementioned system is a promising modality for melasma treatment.

Nanoencapsulated Extract of a Red Seaweed (Rhodophyta) Species as a Promising Source of Natural Antioxidants

Marine seaweed species represent an important source of bioactive compounds possessing antioxidant activity. This study aimed at evaluating the antioxidant capacity of the Jania rubens algal extract by means of two antioxidant assays, i.e., 2,2-diphenyl-1-picrylhydrazyl and ferric-reducing antioxidant power. The seaweeds' total phenolic and flavonoid contents were also assayed as markers of antioxidant activity. To identify active agents responsible for the antioxidant activity, gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry were used for comprehensive metabolites characterization. To enhance the Jania rubens efficacy, the extract was nanoencapsulated using an ionic gelation method by means of high-pressure homogenization. The optimum nanoformulation had a particle size of 161 nm, a ζ potential of 31.2 mV, a polydispersity index of 0.211, and entrapment efficiency of 99.7%. The in vitro phytochemicals' release profiles of Jania rubens chitosan nanoparticles in comparison to the concentration of the raw algal extract were studied by the dialysis bag diffusion method revealing that the extract was released in a controlled pattern. The results indicated the potential advantages of the encapsulated Jania rubens extract, with its potent antioxidant activity, for use in different applications where sustained release is useful.

Polymeric Dental Nanomaterials: Antimicrobial Action

This review aims to describe and critically analyze studies published over the past four years on the application of polymeric dental nanomaterials as antimicrobial materials in various fields of dentistry. Nanoparticles are promising antimicrobial additives to restoration materials. According to published data, composites based on silver nanoparticles, zinc(II), titanium(IV), magnesium(II), and copper(II) oxide nanoparticles, chitosan nanoparticles, calcium phosphate or fluoride nanoparticles, and nanodiamonds can be used in dental therapy and endodontics. Composites with nanoparticles of hydroxyapatite and bioactive glass proved to be of low efficiency for application in these fields. The materials applicable in orthodontics include nanodiamonds, silver nanoparticles, titanium(IV) and zinc(II) oxide nanoparticles, bioactive glass, and yttrium(III) fluoride nanoparticles. Composites of silver nanoparticles and zinc(II) oxide nanoparticles are used in periodontics, and nanodiamonds and silver, chitosan, and titanium(IV) oxide nanoparticles are employed in dental implantology and dental prosthetics. Composites based on titanium(IV) oxide can also be utilized in maxillofacial surgery to manufacture prostheses. Composites with copper(II) oxide nanoparticles and halloysite nanotubes are promising materials in the field of denture prosthetics. Composites with calcium(II) fluoride or phosphate nanoparticles can be used in therapeutic dentistry for tooth restoration.

Delineating a potent antiviral activity of Cuphea ignea extract loaded nano-formulation against SARS-CoV-2: In silico and in vitro studies

The outbreak of coronavirus disease-2019, caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) is a worldwide emerging crisis. Polyphenols are a class of herbal metabolites with a broad-spectrum antiviral activity. However, most polyphenols encounter limited efficacy due to their poor solubility and degradation in neutral and basic environments. Thus, the effectiveness of their pharmaceutical application is critically dependent on the delivery systems to overcome the aforementioned drawbacks. Herein, Polyphenols-rich Cuphea ignea extract was prepared and its constituents were identified and quantified. Molecular docking was conducted for 15 compounds in the extract against SARS-CoV-2 main protease, among which rutin, myricetin-3-O-rhamnoside and rosmarinic acid depicted the most promising antiviral activity. Further, a self-nanoemulsifying formulation, composed of 10% oleic acid, 40% tween 20 and propylene glycol 50%, was prepared to improve the solubility of the extract components and enable its concurrent delivery permitting combined potency. Upon dilution with aqueous phases, the formulation rapidly Formsnanoemulsion of good stability and excellent dissolution profile in acidic pH when compared to the crude extract. It inhibited SARS-CoV-2 completely in vitro at a concentration as low as 5.87 μg/mL presenting a promising antiviral remedy for SARS-CoV-2, which may be attributed to the possible synergism between the extract components.

Hybrid chitosan-lipid nanoparticles of green tea extract as natural anti-cellulite agent with superior in vivo potency: full synthesis and analysis

The aim of this work is to exploit the advantages of chitosan (CS) as a nanocarrier for delivery of anti-cellulite drug, green tea extract (GTE), into subcutaneous adipose tissue. Primarily, analysis of herbal extract was conducted via newly developed and validated UPLC method. Ionic gelation method was adopted in the preparation of nanoparticles where the effect lecithin was investigated resulting in the formation of hybrid lipid-chitosan nanoparticles. Optimal formula showed a particle size of 292.6 ± 8.98 nm, polydispersity index of 0.253 ± 0.02, zeta potential of 41.03 ± 0.503 mV and an entrapment efficiency percent of 68.4 ± 1.88%. Successful interaction between CS, sodium tripolyphosphate (TPP) and lecithin was confirmed by Fourier-transform infrared spectroscopy, differential scanning calorimetry and X-ray diffraction. Morphological examination was done using transmission electron microscope and scanning electron microscope confirmed spherical uniform nature of GTE load CS-TPP nanoparticles. Ex vivo permeation study revealed permeability enhancing activity of the selected optimal formula due to higher GTE deposition in skin in comparison to GTE solution. Moreover in vivo study done on female albino Wistar rats carried out for 21 days proved successful potential anti-cellulite activity upon its application on rats’ skin. Histological examination showed significant reduction of adipocyte perimeter and area and fat layer thickness. Results of the current study demonstrated that the developed GTE-loaded CS-TPP nanoparticle comprised of chitosan and lecithin showed permeability enhancing activity along with the proven lipolytic effect of green tea represent a promising delivery system for anti-cellulite activity.

Chitosan-Coated PLGA Nanoparticles Loaded with Peganum harmala Alkaloids with Promising Antibacterial and Wound Healing Activities

Wound healing is a major healthcare concern, and complicated wounds may lead to severe outcomes such as septicemia and amputations. To date, management choices are limited, which warrants the search for new potent wound healing agents. Natural products loaded in poly (lactic-co-glycolic acid) (PLGA) coated with chitosan (CS) constitute a promising antibacterial wound healing formulation. In this work, harmala alkaloid-rich fraction (HARF) loaded into PLGA nanoparticles coated with chitosan (H/CS/PLGA NPs) were designed using the emulsion-solvent evaporation method. Optimization of the formulation variables (HARF: PLGA and CS: PLGA weight ratios, sonication time) was performed using the 33 Box-Behnken design (BBD). The optimal NPs were characterized using transmission electron microscopy (TEM) and Attenuated Total Reflection Fourier-Transformed Infrared Spectroscopy (ATR-FTIR). The prepared NPs had an average particle size of 202.27 ± 2.44 nm, a PDI of 0.23 ± 0.01, a zeta potential of 9.22 ± 0.94 mV, and an entrapment efficiency of 86.77 ± 4.18%. In vitro drug release experiments showed a biphasic pattern where an initial burst of 82.50 ± 0.20% took place in the first 2 h, which increased to 87.50 ± 0.50% over 72 h. The designed optimal H/CS/PLGA NPs exerted high antibacterial activity against Staphylococcus aureus and Escherichia coli (MIC of 0.125 and 0.06 mg/mL, respectively) compared to unloaded HARF (MIC of 0.50 mg/mL). The prepared nanoparticles were found to be biocompatible when tested on human skin fibroblasts. Moreover, the wound closure percentage after 24 h of applying H/CS/PLGA NPs was found to be 94.4 ± 8.0%, compared to free HARF and blank NPs (68.20 ± 5.10 and 50.50 ± 9.40%, respectively). In conclusion, the three components of the developed nanoformulation (PLGA, chitosan, and HARF) have synergistic antibacterial and wound healing properties for the management of infected wounds.

Design of Experiments to Achieve an Efficient Chitosan-Based DNA Vaccine Delivery System

In current times, DNA vaccines are seen as a promising approach to treat and prevent diseases, such as virus infections and cancer. Aiming at the production of a functional and effective plasmid DNA (pDNA) delivery system, four chitosan polymers, differing in the molecular weight, were studied using the design of experiments (DoE) tool. These gene delivery systems were formulated by ionotropic gelation and exploring the chitosan and TPP concentrations as DoE inputs to maximize the nanoparticle positive charge and minimize their size and polydispersity index (PDI) as DoE outputs. The obtained linear and quadratic models were statistically significant (p-value < 0.05) and non-significant lack of fit, with suitable coefficient of determination and the respective optimal points successfully validated. Furthermore, morphology, stability and cytotoxicity assays were performed to evaluate the endurance of these systems over time and their further potential for future in vitro studies. The subsequent optimization process was successful achieved for the delivery systems based on the four chitosan polymers, in which the smallest particle size was obtained for the carrier containing the 5 kDa chitosan (~82 nm), while the nanosystem prepared with the high molecular weight (HMW) chitosan displayed the highest zeta potential (~+26.8 mV). Delivery systems were stable in the formulation buffer after a month and did not exhibit toxicity for the cells. In this sense, DoE revealed to be a powerful tool to explore and tailor the characteristics of chitosan/pDNA nanosystems significantly contributing to unraveling an optimum carrier for advancing the DNA vaccines delivery field.

Formulation of olopatadine hydrochloride viscous eye drops - physicochemical, biopharmaceutical and efficacy assessment using in vitro and in vivo approaches

The aim of this work was the formulation and the comprehensive evaluation of the viscous eye drops using vehicles containing medium chain chitosan (0.5% w/v), hydroxypropyl guar gum (0.25% w/v) and their combination as carriers for olopatadine (0.1% w/v). Physicochemical properties (appearance, clarity, pH, osmolality, viscosity and drug content) of the tested formulations were within acceptable ranges for the ophthalmic preparations, while DSC and FT-IR techniques demonstrated the compatibility between olopatadine and polymers. The drug permeability was successfully estimated in vitro using both HCE-T cell-based models (Model I and Model II) and the parallel artificial membrane permeability assay (PAMPA), considering the impact of chitosan as a permeation enhancer. The MTT cytotoxicity assay demonstrates that the tested formulations (diluted 10-fold in HBSS pH 5.5) were non-toxic and well tolerated. An ocular itch test on mice was carried out with the formulation containing the combination of polymers comparable with a commercially available olopatadine eye drops without viscosity enhancers. The tested eye drops produced a slightly higher anti-pruritic/analgesic-like effect than the commercial preparation. It could be assumed that the use of this viscous ophthalmic vehicle due to its advanced mucoadhesive properties and good safety profile is a feasible strategy to improve the efficacy of olopatadine.

Thymoquinone-entrapped chitosan-modified nanoparticles: formulation optimization to preclinical bioavailability assessments

The major limitation with the oral administration of most of the phytochemicals is their low aqueous solubility and bioavailability. Thymoquinone (THQ) is one of the most widely used phytochemicals used to treat a variety of diseases. However, strong lipophilic characteristics limit its clinical application. Therefore, this study was aimed to design novel chitosan (C) modified polycaprolactone (PL) nanoparticles (NPs) for improved oral bioavailability of THQ. THQ-CPLNPs was optimized 33-Box-Behnken design. After that, the optimized THQ-CPLNPs was characterized by different parameters. THQ-CPLNPs showed the size, PDI, and ZP of 182.32 ± 6.46 nm, 0.179 ± 0.012, and +21.36 ± 1.22 mV, respectively. The entrapment and loading capacity were found to be 79.86 ± 4.36%, and 13.45 ± 1.38%, respectively. THQ-CPLNPs exhibited burst release in initial 2 h followed by prolonged release up to 24 h in simulated intestinal fluids. THQ-CPLNPs showed excellent mucoadhesion properties which were further confirmed with the intestinal permeation study as well as confocal microscopy. The study revealed higher permeation of THQ-CPLNPs compared to neat THQ suspension (THQ-S). Moreover, in vivo gastric irritation study revealed good compatibility of THQ-CPLNPs with the gastric mucosa. Furthermore, pharmacokinetic results depicted ∼3.53-fold improved oral bioavailability of THQ from THQ-CPLNPs than THQ-S. Therefore, from the findings, it was concluded that the prepared polymeric NPs could be an effective delivery system for improved oral bioavailability of THQ.

Simvastatin-Incorporated Drug Delivery Systems for Bone Regeneration

Local drug delivery systems composed of biomaterials and osteogenic substances provide promising strategies for the reconstruction of large bone defects. In recent years, simvastatin has been studied extensively for its pleiotropic effects other than lowering of cholesterol, including its ability to induce osteogenesis and angiogenesis. Accordingly, several studies of simvastatin incorporated drug delivery systems have been performed to demonstrate the feasibility of such systems in enhancing bone regeneration. Therefore, this review explores the molecular mechanisms by which simvastatin affects bone metabolism and angiogenesis. The simvastatin concentrations that promote osteogenic differentiation are analyzed. Furthermore, we summarize and discuss a variety of simvastatin-loaded drug delivery systems that use different loading methods and materials. Finally, current shortcomings of and future development directions for simvastatin-loaded drug delivery systems are summarized. This review provides various advanced design strategies for simvastatin-incorporated drug delivery systems that can enhance bone regeneration.

Recent Biomedical Approaches for Chitosan Based Materials as Drug Delivery Nanocarriers

In recent decades, drug delivery systems (DDSs) based on nanotechnology have been attracting substantial interest in the pharmaceutical field, especially those developed based on natural polymers such as chitosan, cellulose, starch, collagen, gelatin, alginate and elastin. Nanomaterials based on chitosan (CS) or chitosan derivatives are broadly investigated as promising nanocarriers due to their biodegradability, good biocompatibility, non-toxicity, low immunogenicity, great versatility and beneficial biological effects. CS, either alone or as composites, are suitable substrates in the fabrication of different types of products like hydrogels, membranes, beads, porous foams, nanoparticles, in-situ gel, microparticles, sponges and nanofibers/scaffolds. Currently, the CS based nanocarriers are intensely studied as controlled and targeted drug release systems for different drugs (anti-inflammatory, antibiotic, anticancer etc.) as well as for proteins/peptides, growth factors, vaccines, small DNA (DNAs) and short interfering RNA (siRNA). This review targets the latest biomedical approaches for CS based nanocarriers such as nanoparticles (NPs) nanofibers (NFs), nanogels (NGs) and chitosan coated liposomes (LPs) and their potential applications for medical and pharmaceutical fields. The advantages and challenges of reviewed CS based nanocarriers for different routes of administration (oral, transmucosal, pulmonary and transdermal) with reference to classical formulations are also emphasized.

Protective Action of Jania rubens Nanoencapsulated Algal Extract in Controlling Vegetable Oils' Rancidity

The development of natural antioxidants that can mitigate oil oxidation is on the rise. Several antioxidants have been developed from natural terrestrial plants, with less emphasis on marine algae. Rancidity is a major degradative reaction limiting the shelf-life and deteriorating the quality of vegetable oils. The goal of this study was to evaluate the ability of the Jania rubens' (J. rubens) seaweed extract encapsulated by chitosan/tripolyphosphate in retarding lipids' oxidation in vegetable oils. To improve the J. rubens efficacy, the extract was nanoencapsulated using the ionic gelation method. A Box-Behnken design was applied for the optimization of the formulation variables (chitosan/tripolyphosphate amounts, homogenization time, and homogenization speed). The optimum nanoformulation was characterized by transmission electron microscopy. It had a particle size of 161 nm, zeta potential of 31.2 mV, polydispersity index of 0.211, and entrapment efficiency of 99.7%. The ability of the optimum formula to extend the shelf-life of vegetable oils was based on peroxide value and thiobarbituric acid assays. In addition, headspace solid-phase microextraction was applied to detect the oils' volatiles as secondary markers of rancidity. The results revealed that the nanoencapsulated algal extract considerably reduced the rate of oils' oxidation and that its activity was comparable to that of a widely used synthetic antioxidant.

Chitosan Nanocarrier Entrapping Hydrophilic Drugs as Advanced Polymeric System for Dual Pharmaceutical and Cosmeceutical Application: A Comprehensive Analysis Using Box-Behnken Design

The objective of the present research is to propose chitosan as a nanocarrier for caffeine—a commonly used drug in combating cellulite. Being a hydrophilic drug, caffeine suffers from insufficient topical penetration upon application on the skin. Chitosan nanoparticles loaded with caffeine were prepared via the ionic gelation technique and optimized according to a Box–Behnken design. The effect of (A) chitosan concentration, (B) chitosan solution pH, and (C) chitosan to sodium tripolyphosphate mass ratio on (Y1) entrapment efficiency percent, (Y2) particle size, (Y3) polydispersity index, and (Y4) zeta potential were studied. Subsequently, the desired constraints on responses were applied, and validation of the optimization procedure was confirmed by the parameters exhibited by the optimal formulation. A caffeine entrapment efficiency percent of 17.25 ± 1.48%, a particle size of 173.03 ± 4.32 nm, a polydispersity index of 0.278 ± 0.01, and a surface charge of 41.7 ± 3.0 mV were attained. Microscopical evaluation using transmission electron microscope revealed a typical spherical nature of the nanoparticles arranged in a network with a further confirmation of the formation of particles in the nano range. The results proved the successful implementation of the Box–Behnken design for optimization of chitosan-based nanoparticles in the field of advanced polymeric systems for pharmaceutical and cosmeceutical applications.

Encapsulation of the Natural Product Tyrosol in Carbohydrate Nanosystems and Study of Their Binding with ctDNA

Tyrosol, a natural product present in olive oil and white wine, possesses a wide range of bioactivity. The aim of this study was to optimize the preparation of nanosystems encapsulating tyrosol in carbohydrate matrices and the investigation of their ability to bind with DNA. The first encapsulation matrix of choice was chitosan using the ionic gelation method. The second matrix was β-cyclodextrin (βCD) using the kneading method. Coating of the tyrosol-βCD ICs with chitosan resulted in a third nanosystem with very interesting properties. Optimal preparation parameters of each nanosystem were obtained through two three-factor, three-level Box-Behnken experimental designs and statistical analysis of the results. Thereafter, the nanoparticles were evaluated for their physical and thermal characteristics using several techniques (DLS, NMR, FT-IR, DSC, TGA). The study was completed with the investigation of the impact of the encapsulation on the ability of tyrosol to bind to calf thymus DNA. The results revealed that tyrosol and all the studied systems bind to the minor groove of ctDNA. Tyrosol interacts with ctDNA via hydrogen bond formation, as predicted via molecular modeling studies and corroborated by the experiments. The tyrosol-chitosan nanosystem does not show any binding to ctDNA whereas the βCD inclusion complex shows analogous interaction with that of free tyrosol.