Visible-light-driven selective oxidation of glucose in water with H-ZSM-5 zeolite supported biomimetic photocatalyst

Highly efficient photocatalyst fabricated from the recycling of heavy metal ions in wastewater for dye degradation

Water pollution and energy crisis are becoming global and strategic issues that people are closely concerned about. Green and energy-saving photocatalytic technology is developing rapidly in solving global energy crises and environmental pollution problems. Therefore, we propose the "kill two birds with one stone" strategy to design efficient photocatalysts for dye wastewater treatment by utilizing heavy metal ions in wastewater. The adsorption properties of Mordenite (MOR) were utilized to removal heavy metal ions (Cd2+ and Zn2+) from waste water, and the adsorbed heavy metal ions were dried and sulfurized to obtain CdS/ZnS/MOR(ZnCdM). Then, g-C3N4 was ultrasonically dispersed and composited with ZnCdM by self-assembly, 25 wt% ZnCdCM photocatalytic material was obtained with a degradation rate of 99.8% in 1.5 h for Rhodamine B(RhB). It was found that MOR can provid adequate support for active substances, and the surface of MOR with smaller sizes of CdS nanoparticles, ZnS nanoparticles and g-C3N4 nanosheets, which increased the specific surface area of the materials and improved the reactivity. The porous structure of MOR is favorable for the enrichment of RhB, and the electric field effect of MOR leads to the decrease of the photogenerated carrier complex rate in the semiconductor, which increases the catalytic efficiency. In addition, the double Z charge transfer mechanism formed by CdS, ZnS, g-C3N4 is favorable for separating photogenerated carriers. These synergistic effects improved the photocatalytic efficiency. This strategy will be a green and promising solution to water pollution and energy crisis.

Light-Driven Depolymerization of Cellulosic Biomass into Hydrocarbons

Cellulose and hemicellulose are the main constituents of lignocellulosic biomass. Chemical derivatization of lignocellulosic biomass leads to a range of C5 and C6 organic compounds. These C5 and C6 compounds are valuable precursors (or fine chemicals) for developing sustainable chemical processes. Therefore, depolymerization of cellulose and hemicellulose is essential, leading to the development of various materials that have applications in biomaterial industries. However, most depolymerized processes for cellulose have limited success because of its structural quality: crystallinity, high hydrogen-bond networking, and mild solubility in organic and water. As a result, various chemical treatments, acidic (mineral or solid acids) and photocatalysis, have developed. One of the significant shortcomings of acidic treatment is that the requirement for high temperatures increases the commercial end cost (energy) and hampers product selectivity. For example, a catalyst with prolonged exposure to high temperatures damages the catalyst surface over time; therefore, it cannot be used for iterative cycles. Photocatalysts provide ample application to overcome such flaws as they do not require high temperatures to perform efficient catalysis. Various photocatalysts have shown efficient cellulosic biomass conversion into its C6 and C5 hydrocarbons and the production of hydrogen (as a green energy component). For example, TiO2-based photocatalysts are the most studied for biomass valorization. Herein, we discussed the feasibility of a photocatalyst with application to cellulosic biomass hydrolysis.

Effect of SiO2/Al2O3 ratio on the electrochemical performance of amorphous zeolite loaded with cobalt oxide grown via steam-assisted crystallization method

Improving the performance of a supercapacitor is one of the main approaches to solve the energy shortage problem. Electrode material is one of the key components limiting the efficiency of a supercapacitor. Discovering, tuning, and improving electrode materials are very important. This work reports the effect of SiO2/Al2O3 ratio on electrochemical performances of amorphous zeolites ZSM5 (AZ) and H-ZSM5 (H-AZ) loaded with cobalt oxide. Two SiO2/Al2O3 ratios (1 = 6.2 and 2 = 8.3) of AZ1, AZ2 and H-AZ1, H-AZ2 were synthesized by a facile impregnation method. Then, controlled masses of cobalt oxide were introduced to enhance the supercapacitive performances of the amorphous zeolite. Investigation of the SiO2/Al2O3 ratio in the cobalt oxide/zeolite composite (Co/AZ and Co/H-AZ) was carried out to unveil its effect on the electrochemical properties. Worthy of note is the fact that the resulting electrode materials exhibited supercapacitive behavior that is effective over a potential window ranging from 0 to 0.5 V in potassium hydroxide (1 M KOH) aqueous electrolyte. Results from Galvanometry Charging and Discharging (GCD) analyses show that the modified Ni-foam electrodes loaded with Co/H-AZ1 and Co/H-AZ2 are capable of delivering a relatively high specific capacity from 45.97 mA h g-1 to a high value of 72.5 mA h g-1 at 1 A g-1 and Ni-foam electrodes loaded with Co/AZ1 and Co/AZ2 exhibited values from 26 mA h g-1 to 52.83 mA h g-1 respectively. It is clearly shown that, when the mass ratio SiO2/Al2O3 increases, the specific capacity increases as well. It was also noticed that after 2000 cycles, Co/H-AZ1 and Co/AZ1 have a poor coulombic efficiency while Co/H-AZ2 and Co/AZ2 exhibited 98% for coulombic efficiency. Finally, this study shows that to fabricate high performance supercapacitors with amorphous zeolite loaded with cobalt oxide, one should keep the ratio of SiO2/Al2O3 as high as possible during synthesis.

In situ growth of hierarchical phase junction CdS on a H-mordenite zeolite for enhanced photocatalytic properties

A kind of cadmium sulfide (CdS) nanocomposite with different crystalline phases was grown on the surface of H-mordenite zeolite (HMOR) by a chemical liquid-phase co-precipitation method. In this work, 2 wt% CdS@HMOR photocatalytic material with the coexistence phase (hexagonal phase and cubic phase) of cadmium sulfide was grown on the surface of HMOR by controlling the reaction temperature and ammonia concentration. Photocatalytic degradation of methylene blue (MB) was used as an index to detect the photocatalytic performance of materials. The results indicated that the photocatalytic degradation efficiency of the system with HMOR was significantly improved in comparison to that without HMOR (CdS, 40.34%, 0.2578 h^-1). It was found that 2 wt% CdS@HMOR had the best photocatalytic activity. The degradation rate of MB was 84.15% in 2 h, and the degradation rate constant was 0.8884 h^-1. When 1.5 ml H₂O₂ was introduced into the system, the degradation rate of MB was increased to 98.98%, and the degradation rate constant was 1.9976 h^-1. SEM, HRTEM, PL, EIS and photocurrent showed that the cubic and hexagonal phases of CdS were in contact with each other on the HMOR surface, forming a good electron transport. By XRD, XPS and SEM tests, the results of materials after four cycles of reactions showed that the structure of the 2 wt% CdS@HMOR was still stable. Therefore, HMOR may provide a good support for CdS, and the synergistic effect between them is beneficial for the occurrence of photocatalytic reactions. HMOR can act as an electron receptor to inhibit the recombination of carriers. The homo-junction between different phases of CdS on the surface of HMOR is beneficial to the separation of photo-induced carriers. These results indicate that the construction of phase heterojunctions on zeolites and the synergism among them are a method for improving the photocatalytic activity.

Application of natural minerals in photocatalytic degradation of organic pollutants: A review

Photocatalysis is an effective, inexpensive and environmentally friendly technology for the decomposition of various aqueous organic pollutants and plays an increasingly critical role in the degradation of pollutants. Natural minerals are abundant natural resources on Earth and can be obtained directly from nature. Natural minerals are excellent photocatalyst carriers that are environmentally friendly, low in price, and will not cause secondary pollution to the environment. Natural minerals have the characteristics of a large specific surface area, providing more active centres, and adsorbing pollutants to concentrate catalysis. Natural minerals are also excellent photocatalysts, such as haematite and magnetite, which play a very good role in the degradation of water pollutants. Studies that make full use of natural minerals are of great significance. This review covers the latest research on natural minerals as photocatalytic composite materials to degrade organic pollutants in water, including three parts: the classification of natural minerals, the structural description of natural mineral composites, and the photocatalytic degradation of organic pollutants by natural mineral composites. In addition, the current limitations and opinions of natural mineral composites are discussed to achieve better results in applying natural minerals.

Synthesis of nanosheet epitaxial growth ZSM-5 zeolite with increased diffusivity and its catalytic cracking performance

The introduction of microporous substrate in the nanosheet zeolite reduces the “acid wall” barrier. The diffusional time constant of RP-120 is increased by 32%, and its TOF is increased by 54%.

Light-driven transformation of biomass into chemicals using photocatalysts - Vistas and challenges

Lignocellulosic biomass has become an important sustainable resource for fuels, chemicals and energy. It is an attractive source for alternative fuels and green chemicals because it is non-edible and widely available in the planet in huge volumes. The use of biomass as starting material to produce fuels and chemicals leads to closed carbon cycle and promotes circular economy. Although there are many thermo-chemical methods such as pyrolysis, liquefaction and gasification close at hand for processing lignocellulosic biomass and transforming the derived compounds into valuable chemicals and fuels, the photocatalytic method is more advantageous as it utilizes light and ambient conditions for reforming the said compounds. Appraisal of recent literature indicates a variety of photocatalytic systems involving different catalysts, reactors and conditions studied for this purpose. This article reviews the recent developments on the photocatalytic oxidation of biomass and its derivatives into value-added chemicals. The nature of the biomass and derived molecules, nature of the photocatalysts, efficiency of the photocatalysts in terms of conversion and selectivity, influence of reaction conditions and light sources, effect of additives and mechanistic pathways are discussed. Importance has been given also to discuss the complementary technologies that could be coupled with photocatalysis for better conversion of biomass and biomass-derived molecules to value-added chemicals. A summary of these aspects, conclusions and future prospects are given in the end.

Earth-abundant 3d-transition-metal catalysts for lignocellulosic biomass conversion

Transformation of biomass to chemicals and fuels is a long-term goal in both science and industry. However, high cost is one of the major obstacles to the industrialization of this sustainable technology. Thus, developing catalysts with high activity and low-cost is of great importance for biomass conversion. The last two decades have witnessed the increasing achievement of the use of earth-abundant 3d-transition-metals in catalysis due to their low-cost, high efficiency and excellent stability. Here, we aim to review the fast development and recent advances of 3d-metal-based catalysts including Cu, Fe, Co, Ni and Mn in lignocellulosic biomass conversion. Moreover, present research trends and invigorating perspectives on future development are given.

Recent Advances in Photocatalytic Transformation of Carbohydrates Into Valuable Platform Chemicals

In response to the less accessible fossil resources and deteriorating environmental problems, catalytic conversion of the abundant and renewable lignocellulosic biomass to replace fossil resources for the production of value-added chemicals and fuels is of great importance. Depolymerization of carbohydrate and its derivatives can obtain a series of C5-C6 monosaccharides (e.g., glucose and xylose) and their derived platform compounds (e.g., HMF and furfural). Selective transformation of lignocellulose using sustainable solar energy via photocatalysis has attract broad interest from a growing scientific community. The unique photogenerated reactive species (e.g., h+, e−, •OH, •O2−, and 1O2), novel reaction pathways as well as the mild reaction conditions make photocatalysis a “dream reaction.” This review is aimed to provide an overview of the up-to-date contributions achieved in the selective photocatalytic transformation of carbohydrate and its derivatives. Photocatalytic methods, properties and merits of different catalytic systems are well summarized. We then put forward future perspective and challenges in this field.

Photocatalytic processes for biomass conversion

This review focuses on the photocatalytic conversion of biomass, emphasizing several types of systems, including different photocatalysts and biomass derivatives.

Recent advances in the synthesis and applications of mordenite zeolite - review

Among the many industrially important zeolites, mordenite is found to be interesting because of its unique and exceptional physical and chemical properties. Mordenite (high silica zeolite) is generally prepared by the hydrothermal method using TEA+ cations. TEA+ cations are the best templating agent, though they can create a number of issues, for instance, generating poison and high manufacturing cost, wastewater contamination, and environmental pollution. Hence, it is necessary to find a mordenite synthesis method without using an organic template or low-cost template. In this review, a number of unique sources were used in the preparation of mordenite zeolite, for instance, silica sources (rice husk ash, silica gel, silica fumes), alumina sources (metakaolin, faujasite zeolite) and sources containing both silica and alumina (waste coal fly ash). These synthesis approaches are also based on the absence of a template or low-cost mixed organic templates (for instance, glycerol (GL), ethylene glycol (EG), and polyethylene glycol 200 (PEG)) or pyrrolidine-based mesoporogen (N-cetyl-N-methylpyrrolidinium) modifying the mordenite framework which can create unique properties. The framework properties and optical properties (indium-exchanged mordenite zeolite) have been discussed. Mordenite is generally used in alkylation, dewaxing, reforming, hydrocracking, catalysis, separation, and purification reactions because of its large pore size, strong acidity, and high thermal and chemical stability, although the applications are not limited for mordenite zeolite. Recently, several applications such as electrochemical detection, isomerization, carbonylation, hydrodeoxygenation, adsorption, biomass conversion, biological applications (antibacterial activity), photocatalysis, fuel cells and polymerization reactions using mordenite zeolite were explored which have been described in detail in this review.

Advances in catalytic routes for the production of carboxylic acids from biomass: a step forward for sustainable polymers

Polymers are ubiquitously present in our daily life because they can meet a wide range of needs and fields of applications. This success, based on an irresponsible linear consumption of plastics and the access to cheap oil, is creating serious environmental problems. Two lines of actions are needed to cope with them: to adopt a circular consumption of plastics and to produce renewable carbon-neutral monomers. This review analyses the recent advances in the chemocatalytic processes for producing biomass-derived carboxylic acids. These renewable carboxylic acids are involved in the synthesis of relevant general purpose and specialty polyesters and polyamides; some of them are currently derived from oil, while others can become surrogates of petrochemical polymers due to their excellent performance properties. Polyesters and polyamides are very suitable to be depolymerised to other valuable chemicals or to their constituent monomers, what facilitates the circular reutilisation of these monomers. Different types of carboxylic acids have been included in this review: monocarboxylic acids (like glycolic, lactic, hydroxypropanoic, methyl vinyl glycolic, methyl-4-methoxy-2-hydroxybutanoic, 2,5-dihydroxypent-3-enoic, 2,5,6-trihydroxyhex-3-enoic acids, diphenolic, acrylic and δ-amino levulinic acids), dicarboxylic acids (2,5-furandicarboxylic, maleic, succinic, adipic and terephthalic acids) and sugar acids (like gluconic and glucaric acids). The review evaluates the technology status and the advantages and drawbacks of each route in terms of feedstock, reaction pathways, catalysts and economic and environmental evaluation. The prospects and the new research that should be undertaken to overcome the main problems threatening their economic viability or the weaknesses that prevent their commercial implementation have also been underlined.

Tribenzoporphyrazines with dendrimeric peripheral substituents and their promising photocytotoxic activity against Staphylococcus aureus

Infectious diseases constitute a serious problem for human health and life. Although many bacterial and fungal infections can be successfully cured by commonly used antibiotics, a new threat emerges in the form of microbial resistance. For this reason, researchers try to find not only new active pharmaceutical ingredients for conventional antibiotherapy but also try to develop new strategies of microbial inactivation. Photodynamic antimicrobial chemotherapy, which relies on reactive oxygen species generated in situ in the presence of a photosensitizer and with the light of an appropriate wavelength, is one of them. Porphyrazines have been considered as potential photosensitizers for anticancer and antimicrobial photodynamic therapy. In this study, three tribenzoporphyrazines with dendrimeric peripheral substituents were subjected to in vitro antimicrobial photocytotoxicity study. One magnesium(II) tribenzoporphyrazine with peripheral 3,5-bis(3,5-dimethoxybenzyloxy)benzylsulfanyl substituents was synthesized and subjected to physicochemical characterization using NMR, UV-Vis, and mass spectrometry techniques. In photochemical studies this molecule revealed moderate singlet oxygen generation ability (Φ_ΔDMF = 0.12, Φ_ΔDMSO = 0.13). The other two magnesium(II) tribenzoporphyrazines applied in the biological study were 4-[3,5-di(hydroxymethyl)phenoxy]butylsulfanyl-substituted tribenzoporphyrazine and 4-[3,5-bis(benzyloxy)benzyloxy]phenyl-substituted tribenzopyrazinoporphyrazine. For the assessment, three microbial strains were chosen: Gram-positive bacteria Staphylococcus aureus ATCC 25923, Gram-negative bacteria Escherichia coli ATCC 25922, and fungal strain Candida albicans ATCC 10231. Very high activity against Staphylococcus aureus at low 10^-6 M concentration was recorded for magnesium(II) tribenzoporphyrazines with peripheral 3,5-bis(3,5-dimethoxybenzyloxy)benzylsulfanyl and 4-[3,5-di(hydroxymethyl)phenoxy]butylsulfanyl substituents with calculated log reductions of 4.4 and 4.8, respectively. It is worth noting that magnesium(II) tribenzoporphyrazine with 4-[3,5-di(hydroxymethyl)phenoxy]butylsulfanyl substituents revealed also 3.2 log reduction in bacterial growth at the concentration 10^-7 M.

Photocatalytic transformations of lignocellulosic biomass into chemicals

This review highlights recent advances in photocatalytic transformations of lignocellulosic biomass (polysaccharides and lignin) into chemicals (in particular organic oxygenates).

Production of Hexaric Acids from Biomass

Sugar acids obtained by aldohexose oxidation of both the terminal aldehyde group and the hydroxy group at the other end to carboxyl groups are called hexaric acids (i.e., six-carbon aldaric acids). Because hexaric acids have four secondary hydroxy groups that are stereochemically diverse and two carboxyl groups, various applications of these acids have been studied. Conventionally, hexaric acids have been produced mainly by nitric acid oxidation of aldohexose, but full-scale commercialization has not been realized; there are many problems regarding yield, safety, environmental burden, etc. In recent years, therefore, improvements in hexaric acid production by nitric acid oxidation have been made, while new production methods, including biocatalytic methods, are actively being studied. In this paper, we summarize these production methods in addition to research on the application of hexaric acids.