LC–MS/MS method development and validation for the determination of polymyxins and vancomycin in rat plasma

A simple, robust and high-throughput LC-MS/MS method for the therapeutic drug monitoring of polymyxin B1, polymyxin B2, polymyxin B3, isoleucine-polymyxin B1, polymyxin E1 and polymyxin E2 in human plasma

To facilitate clinical therapeutic drug monitoring (TDM) of polymyxin B (PB) and polymyxin E (PE), we developed and validated a simple LC-MS/MS method for simultaneous determination of PB (including polymyxin B1 (PB1), polymyxin B2 (PB2), polymyxin B3 (PB3) and isoleucine-polymyxin B1 (ile-PB1)) and PE (including polymyxin E1 (PE1) and polymyxin E2 (PE2)) in human plasma. PB or PE was extracted from 20.0 μL plasma using a 5% (v/v) formic acid acetonitrile solution and separated on a BEH-C18 column (2.1 × 100 mm, 1.7 μm) with a mobile phase consisting of 0.8% formic acid aqueous solution and 0.2% formic acid acetonitrile solution. Gradient elution was performed over 5.5 min at a flow rate of 0.250 mL/min. Quantitative analysis was conducted in positive ion scanning mode by electrospray ionization and multiple reaction monitoring. The method validation was conducted based on bioanalytical method validation guidance, including specificity, calibration curve, precision, accuracy, recovery, matrix effect, stability and dilution integrity and all of the results satisfied the requirements. The method was simple, robust and high-throughput and is currently being used to provide a TDM service to enhancing therapeutic efficacy and safety use of the PB and PE.

Development and validation of a liquid chromatography-tandem mass spectrometry method for the determination of polymixin B1, B2, ile-B1, E1, and E2 in human plasma and its clinical pharmacokinetic application

Polymyxin B (PB) and Polymyxin E (PE, also called colistin) are used as the last treatment resort for multidrug-resistant Gram-negative bacterial infections. The nephrotoxicity and neurotoxicity of polymyxins limit their clinical use, and guidelines recommend therapeutic drug monitoring (TDM) to optimize efficacy and reduce toxicity. However, there are limited analytical methods available for the determination of PB and PE. This study aimed to develop a simple and robust liquid chromatography with tandem mass spectrometry (LC-MS/MS) analytical method for determining the main compounds of PB and PE, namely PB1, PB2, ile-PB1, PE1, and PE2, in human plasma and to investigate of their pharmacokinetics in critically ill patients with the use of PB and PE, respectively. Plasma PB1, PB2, ile-PB1, PE1, and PE2 were chromatographically separated on a Welch LP-C18 column and detected using electrospray ionization mode coupled with multiple reaction monitoring. The calibration curve showed acceptable linearity over 20-10,000 ng/mL for PB1, PE1, and PE2 and 10-5000 ng/mL for PB2 and ile-PB1 in the plasma, respectively. After validation following approved guidelines, this method was successfully applied for PB and PE pharmacokinetic analysis and TDM in critically ill patients. Additionally, the composition of PB1, PB2, ile-PB1, PE1, and PE2 remains unchanged from 0 to 12 h after entering the patient's body.

Rapid quantification of polymyxin B in human pulmonary epithelial lining fluid by LC-MS/MS and its clinical application

Pulmonary epithelial lining fluid (ELF) was commonly used for the pharmacokinetic study in lower respiratory tract infections. To characterize the intrapulmonary pharmacokinetic properties of polymyxin B following aerosol delivery, we developed and fully validated a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for quantifying polymyxin B in human bronchoalveolar lavage fluid (BALF). The ELF concentrations were calculated by the BALF values of polymyxin B using urea as a volume normalizer. Chromatographic separation was achieved on a Phonomenex Kinetex XB-C18 column(100 mm × 2.1 mm I.D., 2.6 μm)in acetonitrile and water both containing 0.2 % formic acid. The flow rate was set as 0.4 mL/min for a 3.5 min running time. Protein precipitation was used in preparing BALF samples with polymyxin E1 as an internal standard. Polymyxin B was detected under multiple reaction monitoring conditions using the electrospray ionization interface running in the positive ionization mode. The assay showed a good linear relationship over the tested concentration ranges of 0.0300/0.00306---10.0/1.02 mg/L for polymyxin B1/B2 in bronchoalveolar lavage fluid (R2 > 0.99). The inter- and inter-day precisions (RSD, %) were < 12.2 %(15.2 % for LLOQ samples)and the accuracies (%) were within the range of 94.3 ∼ 110.4 %. This reliable LC-MS/MS method for detection of polymyxin B was successfully applied to conduct a pulmonary penetration study in patients following aerosol administration.

Recent Trends in Therapeutic Drug Monitoring of Peptide Antibiotics

Antimicrobial peptides take a specific position in the field of antibiotics (ATBs), however, from a large number of available molecules only a few of them were approved and are used in clinics. These therapeutic modalities play a crucial role in the management of diseases caused by multidrug-resistant bacterial pathogens and represent the last-line therapy for bacterial infections. Therefore, there is a demand for a rationale use of such ATBs based on optimization of the dosing strategy to minimize the risk of resistance and ensure the sustainable efficacy of the drug in real clinical practice. Therapeutic drug monitoring, as a measurement of drug concentration in the body fluids or tissues, results in the optimization of the patient´s medication and therapy outcome. This strategy is beneficial and could result in tailored therapy for different types of infection and the prolongation of the use and efficacy of ATBs in hospitals. This review paper provides an actual overview of approved antimicrobial peptides used in clinical practice and covers current trends in their analysis by convenient and advanced methodologies used for their identification and/or quantitation in biological matrices for therapeutic drug monitoring purposes. Special emphasis is given to the methods with perspective clinical outcomes.

Development and Validation of Liquid Chromatographic Method for Fast Determination of Lincomycin, Polymyxin and Vancomycin in Preservation Solution for Transplants

In this study, a liquid chromatographic method was developed for the fast determination of lincomycin, polymyxin and vancomycin in a preservation solution for transplants. A Kinetex EVO C18 (150 × 4.6 mm, 2.6 µm) column was utilized at 45 °C. Gradient elution was applied using a mixture of mobile phases A and B, both including 30 mM phosphate buffer at pH 2.0 and acetonitrile, at a ratio of 95:5 (v/v) for A and 50:50 (v/v) for B. A flow rate of 1.0 mL/min, an injection volume of 20 µL and UV detection at 210 nm were used. A degradation study treating the three antibiotics with 0.5 M hydrochloric acid, 0.5 M sodium hydroxide and 3% H2O2 indicated that the developed method was selective toward lincomycin, polymyxin, vancomycin and their degradation products. Other ingredients of the preservation solution, like those from the cell culture medium, did not interfere. The method was validated with good sensitivity, linearity, precision and accuracy. Furthermore, lincomycin, polymyxin and vancomycin were found to be stable in this preservation solution for 4 weeks when stored at -20 °C.

Condensation methodology for quantification of Polymyxin B fluorimetrically: application to pharmaceutical formulations and greenness assessment

The appearance of multidrug-resistant Gram-negative bacterial infections, along with the lack of newly discovered antibiotics, resulted in the return to old antimicrobial medications like Polymyxins. As a result, the suggested technique aims to develop a fast, environmentally friendly, and sensitive fluorimetric method for quantifying Polymyxin B. The investigated approach depends on generating a highly fluorescent derivative by a condensation pathway between the studied drug and ninhydrin in the presence of phenylacetaldehyde and then estimated spectrofluorimetrically. After the reaction conditions were well optimized, the fluorescent product was estimated at emission wavelength (λem) = 475.5 nm (following excitation at a wavelength (λex) = 386 nm. The developed calibration plot displayed rectilinear throughout the following range (0.2-3 µg mL- 1), and the calculated limit of detection and quantification were 0.062 µg mL- 1 and 0.187 µg mL- 1, respectively. As a consequence, the drug's ophthalmic and intravenous pharmaceutical forms were both successfully quantified with an excellent degree of recovery. Finally, the methodology's greenness was assessed utilizing Analytical Eco-Scale scores.

Ion suppression, reduced long-term robustness and leakage current of the spray voltage during the ionization of trichloroacetic acid; a case study with a methylmalonic acid assay

Sample clean-up with the protein precipitation solvent trichloroacetic acid (TCA), combined with a stable isotope labeled internal standard, is widely used for the analysis of endogenous and exogenous compounds in serum and plasma with liquid chromatography-tandem mass spectrometry (LC-MS/MS). During the application of an assay for methylmalonic acid (MMA), used for routine analysis in patient care, negative long-term side effects of TCA on assay performance were observed. Step-by-step extensive troubleshooting disclosed the limitations of using TCA in MS. After running over 2000 samples with the MMA assay over a course of one year, a black coating formed between the probe and the heater that was traced to the use of TCA. The MMA assay used a C18 column with an isocratic eluent of 95% water (0.1% formic acid) as starting condition, on which TCA was more retained than MMA. Next, concentrations of 2.2% TCA in the prepared serum or plasma sample caused a drop in spray voltage during ionization into the MS. This was caused by the strong acid properties of TCA, resulting in current loss of the spray voltage between the heated electrospray ionization (HESI) needle and the union holder, which had also a grounding function. Replacing the original metal HESI needle with a custom made fussed silica HESI needle or detaching the union from the union holder, eliminated the effect of the drop in spray voltage. In conclusion, TCA can seriously affect the long-term robustness by affecting the source of the MS. We recommend the use of a very low sample injection volume, and/or shifting the mobile phase to waste when TCA is eluting, when using TCA in LC-MS/MS analysis.

The Determination of Polymyxin B in Critically Ill Patients by the HPLC-MS/MS Method

Polymyxin B (PB) is a dose-dependent drug used to treat multidrug-resistantgram-negative bacteria, for which a suitable method is needed to determine clinical samples. A simple, economical, and efficient high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) method was developed and validated for polymyxin B1 (PB1), polymyxin B1-Ile (PB1-I), polymyxin B2 (PB2), and polymyxin B3 (PB3) in human plasma. Chromatographic column was Waters BEH C18 column (2.1 × 50 mm, 1.7 μm). Phase A was water with 0.2% formic acid (FA), and phase B was acetonitrile containing 0.2% FA. The elution method is gradient elutio. The total analysis time was 5 min. The pretreatment method involved protein precipitation using acetonitrile containing 0.2% trifluoroacetic acid and 0.1% FA as the precipitant. The recovery rate was 92-99%. The total quantity of PB1 and PB1-I was measured in the linear range of 100-8000 ng/mL. Simultaneously, the total amounts of PB2 and PB3 were measured in the linear range of 11.9-948.5 ng/mL. This validated method was successfully applied to the pharmacokinetics of PB in critically ill patients.

Surface molecularly imprinted solid-phase extraction for the determination of vancomycin in plasma samples using HPLC-MS/MS

Vancomycin is a glycopeptide antibiotic used to treat infections caused by Gram-positive bacteria. Due to the narrow therapeutic index of vancomycin, it is necessary to develop a sensitive and reliable analytical method to monitor the drug concentration in plasma. A novel method based on surface molecularly imprinted solid-phase extraction combined with liquid chromatography-tandem mass spectrometry for the determination of vancomycin in plasma sample was developed. The plasma sample was cleaned up through the solid-phase extraction process before the analysis. The calibration standard of vancomycin in plasma ranged between 1 and 100 ng/mL, and the correlation coefficient (r) was 0.9993. The average recoveries were from 94.3 to 104.0%, and the precision was less than 10.5%. The limit of detection and limit of quantification were 0.5 ng/mL and 1 ng/mL, respectively. The method validated was successfully used for the detection of vancomycin in mice after oral administration.

A novel sensitive analytical method for the simultaneous analysis of vancomycin and teicoplanin in human urine via single high-performance liquid chromatography coupled with photodiode array and mass spectrometry in series

Analysis of vancomycin and teicoplanin in biological fluids is vital since they are used in the treatment of hospital infections. For the determination of both glycopeptides in urine, a sensitive and accurate analytical method using high‐performance liquid chromatography coupled with photodiode array and mass spectrometry was developed and validated. This research work is the first attempt to develop a chromatographic method for the determination of two glycopeptides with structural similarities. Moreover, the used non‐invasive sampling method is an advantage of this research effort, especially when the blood sampling is difficult. Urine was treated with acetonitrile and 5% trichloroacetic acid, followed by solid‐phase extraction. The chromatographic separation was established at a C18 column (4.6 × 150 mm, 5 μm), using a gradient method and an electrospray ionization source in a positive mode. The linearity of the method was R²≥ 0.9900. The precision was estimated with a maximum coefficient of variation below 15%, while the accuracy ranged from 64 to 121%. The limit of detection and quantification of both glycopeptides ranged from 0.076 up to 0.33 mg/L and 0.33 up to 2.1 mg/L, respectively, showing the same sensitivity as the triple quadrupole mass spectrometry, which is the most frequently used method.

Utility of Silver-nanoparticles for Nano-fluorimetric Determination of Vancomycin Hydrochloride in Pharmaceutical Formulation and Biological Fluids: Greenness Assessment

Vancomycin hydrochloride (VANH) is a glycopeptide antibiotic commonly employed in the prophylaxis and therapy of various gram-positive bacterial life-threatening infections. Due to the narrow therapeutic window of VANH, its serum levels should be well-monitored to avoid its toxicity and to optimize its therapy. Herein, an innovative silver-nanoparticles enhanced fluorescence technique was designed for VANH rapid analysis in its pharmaceutical formulation and biological fluids. This technique is based on reinforcement of VANH fluorescence intensity with silver-nanoparticles that were synthesized by a redox reaction between VANH and silver nitrate in NaOH alkaline medium using polyvinylpyrrolidone as a stabilizer. The produced silver-nanoparticles were characterized by using UV-visible spectroscopy where they have an intense absorption maximum at 415 nm and transmission electron microscope (TEM) micrograph where they are spherical in shape with smooth surface morphology and size of 10.74 ± 2.44 nm. The fluorescence intensity was measured at 394 nm after excitation at 259 nm. Under optimum conditions, a good linear relationship was accomplished between the VANH concentration and the fluorescence intensity in a range of (1-36) ng/mL with a limit of detection of 0.29 ng/mL. Greenness assessment was performed using two assessment tools namely; eco-scale scoring and green analytical procedure index revealing excellent greenness of the proposed technique. The proposed technique was validated according to the International Conference on Harmonisation (ICH) recommendations and statistically compared with the reported HPLC method revealing no significant difference concerning accuracy and precision at p = 0.05. The proposed technique depended primarily on water as a cheap and eco-friendly solvent.

A systematic review on chromatography-based method validation for quantification of vancomycin in biological matrices

A fully validated bioanalytical methods are prerequisite for pharmacokinetic and bioequivalence studies as well as for therapeutic drug monitoring. Due to high pharmacokinetic variability and narrow therapeutic index, vancomycin requires reliable quantification methods for therapeutic drug monitoring. To identify published chromatographic based bioanalytical methods for vancomycin in current systematic review, PubMed and ScienceDirect databases were searched. The selected records were evaluated against the method validation criteria derived from international guidelines for critical assessment. The major deficiencies were identified in method validation parameters specifically for accuracy, precision and number of calibration and validation standards, which compromised the reliability of the validated bioanalytical methods. The systematic review enacts to adapt the recommended international guidelines for suggested validation parameters to make bioanalysis reliable.

Simultaneous Quantification and Pharmacokinetic Study of Five Homologs of Dalbavancin in Rat Plasma Using UHPLC-MS/MS

Dalbavancin is a novel semisynthetic glycopeptide antibiotic that comprises multiple homologs and isomers of similar polarities. However, pharmacokinetic studies have only analyzed the primary components of dalbavancin, namely B₀ and B₁. In this study, an ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was developed to simultaneously determinate and investigate the five homologous components of dalbavancin, namely, A₀, A₁, B₀, B₁, and B₂, in rat plasma. In this method, methanol was used to precipitate plasma, and a triple-bonded alkyl chromatographic column was used for molecule separation, using 0.1% formic acid-acetonitrile as the mobile phase for gradient elution. Targeted homologs were analyzed by a triple quadrupole mass spectrometer using positive electrospray ionization in multiple reaction monitoring mode. The linearity range was 50–2500 ng/mL with a high correlation coefficient (r² > 0.998). This method was successfully applied in the pharmacokinetic analysis of dalbavancin hydrochloride to investigate dalbavancin components in rats.

Drug Elimination Alteration in Acute Lymphoblastic Leukemia Mediated by Renal Transporters and Glomerular Filtration

PURPOSE

Drug elimination alteration has been well reported in acute lymphoblastic leukemia (ALL). Considering that transporters and glomerular filtration influence, to different extents, the drug disposition, and possible side effects, we evaluated the effects of ALL on major renal transporters and glomerular filtration mediated pharmacokinetic changes, as well as expression of renal drug transporters.

METHODS

ALL xenograft models were established and intravenously injected with substrates of renal transporters and glomerular filtration separately in NOD/SCID mice. The plasma concentrations of substrates, after single doses, were determined using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS).

RESULTS

With the development of ALL, protein expression of MDR1, OAT3 and OCT2 were increased by 2.62-fold, 1.70-fold, and 1.45-fold, respectively, whereas expression of MRP2 and MRP4 were significantly decreased by 30.98% and 45.28% in the kidney of ALL groups compared with control groups. Clearance of MDR1-mediated digoxin, OAT3-mediated furosemide, and OCT2-mediated metformin increased by 3.04-fold, 1.47-fold, and 1.26-fold, respectively. However, clearance of MRPs-mediated methotrexate was reduced by 39.5%. These results are consistent with mRNA expression. Clearance of vancomycin and amikacin, as markers of glomerular filtration rate, had a 2.14 and 1.64-fold increase in ALL mice, respectively.

CONCLUSIONS

The specific alteration of renal transporters and glomerular filtration in kidneys provide a rational explanation for changes in pharmacokinetics for ALL.

Therapeutic drug monitoring of polymyxin B by LC-MS/MS in plasma and urine

Background: A robust and rapid method for therapeutic drug monitoring (TDM) is urgently needed for polymyxin B, which is a last-line antibiotic for multidrug-resistant gram-negative bacteria infection. Methodology: A 3-min run of LC-MS/MS method was established to determine the main components of polymyxin B (polymyxin B1 and B2) in human plasma or urine. Solid-phase extraction was employed to eliminate the matrix effect from complicated samples from patients. Results: The calibration range was 0.050-5.00 and 0.0110-0.549 μg/ml for polymyxin B1 and B2, respectively, in plasma and urine. The precision and accuracy of quality controls, matrix effect, extraction recovery and stability were all validated and satisfied with the ICH requirements. The method was successfully applied to a pharmacokinetic study in healthy subjects and TDM in patients. Conclusion: The rapid LC-MS/MS method was validated for polymyxin B in plasma and urine, and robust for TDM.

Comparative analysis of pharmacokinetics of vancomycin hydrochloride in rabbits after ocular, intragastric, and intravenous administration by LC-MS/MS

The objective of this study was to compare the pharmacokinetics of vancomycin hydrochloride administered into rabbits through different routes and explore the feasibility of peptide drugs entering the systemic circulation through ocular administration. A convenient, accurate, and rapid liquid chromatography-trandem mass spectrometric (LC-MS/MS) method was established and used for the determination of vancomycin hydrochloride in rabbit plasma after intravenous administration (1.5 mg/kg), intragastric, and ocular administration (15 mg/kg). The pharmacokinetic parameters were analyzed using the DAS 2.0 software. We obtained a linear calibration curves vancomycin hydrochloride in plasma of rabbits over a concentration range of 0.05-10.0 μg/mL (R ² > 0.9995), the interassay accuracy was within 5%, precision of 1.66-3.38%, and recovery of >85%. No matrix effects were observed. The absolute bioavailability of vancomycin hydrochloride after intragastric and ocular administration was 1.0 and 7.3%, with the half-life values of 63.1 and 138.5 min, respectively. Therefore, the LC-MS/MS method established in this experiment was suitable for the determination of vancomycin hydrochloride. Vancomycin hydrochloride was rapidly absorbed into the blood circulation after ocular administration. Ocular administration was linked to higher bioavailability compared with intragastric administration, suggesting that the former will become a route for the delivery of peptide drugs.

Evaluation of co-delivery of colistin and ciprofloxacin in liposomes using an in vitro human lung epithelial cell model

Respiratory tract infections caused by multidrug-resistant Gram-negative bacteria are serious burdens to the public. Our previous findings indicated that co-loading of colistin and ciprofloxacin via liposomes improved in vitro antimicrobial activities against multidrug resistant Pseudomonas aeruginosa as compared to the monotherapies. The current study aims to investigate the transport behavior of colistin and ciprofloxacin in liposomes using the in vitro Calu-3 cell monolayer, which is a lung epithelial model cultured under the air-interfaced condition. The cell viability results demonstrated that there was no obvious toxicity of cells exposed to single or co-administered drugs at the concentration ≤500 μg/mL. Transport of ciprofloxacin into the cells was easier than that of colistin, which reached a plateau rapidly. Colistin was less trapped in the mucus or adhered to the apical cell membrane, and less transported across the cell monolayer than ciprofloxacin. The deposition of ciprofloxacin on the apical side increased over time (from 1 to 4 h). There was no drug-drug interaction observed during the transport of ciprofloxacin and colistin across the cell monolayer, when they were dosed together in the solution form. The amount of drug transported across the cell monolayer was decreased in both agents when loaded in liposomes. Both drugs were more trapped in the mucus or more adhered to the apical side cell membrane of the cell monolayer when they were in liposomes. This study demonstrated that co-delivery of colistin and ciprofloxacin in a single liposome can reduce transport capacity of both drugs across the lung epithelial cell monolayer and enhance drug retention on the lung epithelial surfaces; therefore, it is a promising approach to treat the respiratory infections caused by multidrug resistant Pseudomonas aeruginosa.

An ultra-performance liquid chromatography–tandem mass spectrometry method to quantify vancomycin in human serum by minimizing the degradation product and matrix interference

Aim: This study aimed to develop and validate a method for better therapeutic monitoring of vancomycin serum concentration. Methods & results: An ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method was developed and validated to minimize the interference of crystalline degradation product and matrix. It was compared with chemiluminescence microparticle immunoassay (CMIA) and ultra-performance liquid chromatography with ultraviolet detection (UPLC-UV) in the performance of testing normal, on-dialysis and hemolytic serum samples. For on-dialysis samples, a moderate correlation (r = 0.534) was observed between UPLC-UV and UPLC–MS/MS. In testing hemolytic samples, ten (10/85, 11.8%) samples were overestimated by CMIA method. Conclusion: Vancomycin concentration determined by CMIA, UPLC-UV was more affected by various panels of serum samples than UPLC–MS/MS assay, suggesting that UPLC–MS/MS is a more reliable and promising tool for clinical vancomycin therapeutic drug monitoring.

A Review of the Clinical Pharmacokinetics of Polymyxin B

Polymyxin B remains an antibiotic of last resort because of its toxicities. Although newer therapies are becoming available, it is anticipated that resistance to these agents will continue to emerge, and understanding the safest and most efficacious manner to deliver polymyxin B will remain highly important. Recent data have demonstrated that polymyxin B may be less nephrotoxic than colistin. Pharmacokinetically, polymyxin B is primarily eliminated via non-renal pathways, and most do not recommend adjusting the dose for renal impairment. However, some recent studies suggest a weak relationship between polymyxin B clearance and patient creatinine clearance. This review article will describe the clinical pharmacokinetics of polymyxin B and address relevant issues in chemistry and assays available.

Cytochrome C suppresses renal accumulation and nephrotoxicity of polymyxin B

The receptor megalin plays an important role in the accumulation of polymyxin B (PMB) in renal cells in vitro. This study aimed to examine the effects of cytochrome c (cyto c), a typical megalin ligand, on renal accumulation and nephrotoxicity of PMB in vivo. Thirty Sprague-Dawley rats were randomly divided into the vehicle control group, PMB group, PMB + cyto c 50, 100, or 200 mg/kg group, respectively, and were treated with intravenous cyto c 30 min before the administration of PMB 4.0 mg/kg once a day for consecutive 5 days. On the 4th day after administration, 24 h urine was collected to determine N-acetyl-β-D-glucosaminidase excretion. Six hours after the last injection on the 5th day, kidneys were harvested to assay PMB concentration and observe pathological alterations, and blood samples were collected to assay serum creatinine (SCr), blood urea nitrogen (BUN), and blood β₂-microglobulin (β₂-MG) levels. Cyto c 50, 100, and 200 mg/kg decreased the accumulation of PMB in the kidney by 18.5%, 39.1% ( p < 0.01), and 36.8% ( p < 0.01), respectively, and reduced 24 h N-acetyl-β-D- glucosaminidase excretion by 22.5% ( p < 0.05), 40.4% ( p < 0.01), and 40.4% ( p < 0.01), respectively. Kidney pathological damage induced by PMB was markedly reduced by cyto c 100 mg/kg and 200 mg/kg. However, there were no significant differences in SCr, BUN, and blood β₂-MG levels among the groups. These results indicated that cyto c may inhibit the renal accumulation and nephrotoxicity of PMB in a rat model, further proving the role of megalin in the accumulation of PMB.

High-Performance Liquid Chromatography Method for Rich Pharmacokinetic Sampling Schemes in Translational Rat Toxicity Models With Vancomycin

A translational need exists to understand and predict vancomycin‐induced kidney toxicity. We describe: (i) a vancomycin high‐performance liquid chromatography (HPLC) method for rat plasma and kidney tissue homogenate; (ii) a rat pharmacokinetic (PK) study to demonstrate utility; and (iii) a catheter retention study to enable future preclinical studies. Rat plasma and pup kidney tissue homogenate were analyzed via HPLC for vancomycin concentrations ranging from 3–75 and 15.1–75.5 μg/mL, respectively, using a Kinetex Biphenyl column and gradient elution of water with 0.1% formic acid: acetonitrile (70:30 v/v). Sprague‐Dawley rats (n = 10) receiving 150 mg/kg of vancomycin intraperitoneally had plasma sampled for PK. Finally, a catheter retention study was performed on polyurethane catheters to assess adsorption. Precision was <6.1% for all intra‐assay and interassay HPLC measurements, with >96.3% analyte recovery. A two‐compartment model fit the data well, facilitating PK exposure estimates. Finally, vancomycin was heterogeneously retained by polyurethane catheters.

An LC-MS/MS method to determine vancomycin in plasma (total and unbound), urine and renal replacement therapy effluent

AIM

Critical illness and medical interventions, such as renal replacement therapy, can cause changes to vancomycin pharmacokinetics and lead to suboptimal dosing. To comprehensively characterize vancomycin pharmacokinetic a method must measure vancomycin in a range of clinical matrices.

RESULTS

A LC-MS/MS method was developed using hydrophilic interaction liquid chromatography and microsample volumes, where possible. For all matrices, the linear concentration range was 1-100 μg/ml, interassay accuracy and precision was within 15%, and recovery above 80%. No matrix effects were observed. Calibration equivalence may be applied for some matrix combinations.

CONCLUSION

A method for the analysis of vancomycin in plasma (total, unbound), urine and renal replacement therapy effluent, suitable for use in any patient pharmacokinetic study, has been developed and validated.

Simple and rapid quantification of vancomycin in serum, urine and peritoneal/pleural effusion via UHPLC-MS/MS applicable to personalized antibiotic dosing research

Management of the therapy of life-threatening bacterial infection is extremely based on an optimal antibiotic treatment. Achieving the correct vancomycin dosage in blood and target tissues can be complicated in special situations, e.g., where large fluid sequestration and/or acute renal failure occur. A UHPLC-MS/MS method operating in electrospray (ESI) positive ion mode was applied for the determination of vancomycin in serum, urine and peritoneal/pleural effusion. Sample pretreatment was composed of dilution and simple protein precipitation where only a small volume (50μL) of serum, urine or peritoneal/pleural effusion was required. The separation of vancomycin was performed on a Meteoric Core C18 BIO column (100×4.6mm, 2.7μm) by gradient elution with 0.1% formic acid in water and acetonitrile. The total time of analysis was 4.5min. The method was found to be linear in the range of 2-60μM (or 0.5-10μM) for serum, 0.27-10μM (or 2-60μM) for peritoneal/pleural effusion and 25-300μM for urine, which was adequate for the determination of vancomycin in patient samples. The intra- and inter-day precision was below 8% RSD, and accuracy was from 89 to 104%. The UHPLC/MS-MS method offers a fast and reliable approach to determine vancomycin concentrations in three different human body fluid samples (serum, urine and peritoneal/pleural effusion) with a simple sample pretreatment that was the same for all selected specimens. This method should be applicable to large sample series in clinical (pharmacokinetic/pharmacodynamic) studies.

New liquid chromatography-tandem mass spectrometry method for routine TDM of vancomycin in patients with both normal and impaired renal functions and comparison with results of polarization fluoroimmunoassay in light of varying creatinine concentrations

A new LC-MS/MS method with simple sample extraction and a relatively short period of vancomycin analysis for routine therapeutic drug monitoring was developed and validated. 50μL serum was precipitated using 20μL 33% trichloroacetic acid and 0.5mol/L NH₄OH was added to increase pH before analysis. A RP BEH C18, 1.7μm, 2.1×50mm column maintained at 30°C and tobramycin as internal standard were used. Mass detection was performed in positive electrospray mode. The results obtained with LC-MS/MS method were correlated with an FPIA assay (Abbott AxSYM) using mouse monoclonal antibody. Subjects were divided into three groups according to creatinine levels (53.5±19.1, 150.2±48.4, 471.7±124.7μmol/L) and Passing-Bablok regression analysis and Bland-Altman analysis were used to compare vancomycin concentrations. The results of subjects with both normal and higher creatinine levels correlated very well and the linear regression model equations were near ideal (LC-MS_VAN=0.947×Abbott_VAN+0.192 and LC-MS_VAN=0.973×Abbott_VAN-0.411 respectively). Dialyzed patients with the highest creatinine levels showed about 14% greater vancomycin concentration with the FPIA assay (LC-MS_VAN=0.866×Abbott_VAN+2.127). This overestimation probably due to the presence of the metabolite CDP ought not to be of clinical relevance owing to the wide range of recommended vancomycin concentration.

Determination of Vancomycin in Human Serum by Cyclodextrin-Micellar Electrokinetic Capillary Chromatography (CD-MEKC) and Application for PDAP Patients

A simple and sensitive cyclodextrin-micellar electrokinetic capillary chromatography (CD-MEKC) method with UV detection was developed and validated for the determination of vancomycin (VCM) in serum. The separation was achieved in 14 min at 25 °C with a fused-silica capillary column of 40.2 cm × 50 mm i.d. (effective length 30.2 cm) and a run buffer containing 25 mM borate buffer with 50 mM sodium dodecylsulfonate (SDS) (pH 9.5) and 2% sulfobutyl-β-cyclodextrin (sulfobutyl-β-CD). Under optimal conditions for biological samples, good separations with high efficiency and short analysis time were achieved. Several parameters affecting the drug separation from biological matrices were studied, including buffer types, concentrations, and pHs. The methods were validated over the range of 0.9998-99.98 µg/mL. Calibration curves of VCM also showed good linearity (r² > 0.999). Intra- and interday precisions (relative standard deviation, RSD) were less than 5.80% and 7.38%, and lower limit of quantification (LLOQ) were lower than 1.0 μg/mL. The mean recoveries ranged between 84.03% and 91.69%. The method was successfully applied for monitoring VCM concentrations in serum of patients with peritoneal dialysis-associated peritonitis (PDAP). The assay should be applicable to pharmacokinetic studies and routine therapeutic drug monitoring of this drug in serum.

A UPLC-MS/MS method for analysis of vancomycin in human cerebrospinal fluid and comparison with the chemiluminescence immunoassay

Vancomycin (VCM) is clinically used in treating patients with postoperative intracranial infections. The cerebrospinal fluid (CSF) concentration of VCM varies greatly among patients. To guide the dosage regimens, monitoring of VCM in CSF is needed. However a method for analysis of VCM in human CSF is lacking. An ultraperformance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) was developed and validated for analysis of VCM in human CSF, and the agreement of UPLC-MS/MS and chemiluminescence immunoassay (CLIA) in the analysis of CSF VCM was evaluated. The ion transitions were m/z 725.5 > 144.1 for VCM and m/z 455.2 > 308.2 for methotrexate (internal standard). The agreement between UPLC-MS/MS and CLIA was evaluated by Bland-Altman plot in 179 samples. The calibration range of the UPLC-MS/MS method was 1-400 mg/L. The inaccuracy and imprecision were -0.69-10.80% and <4.95%. The internal standard normalized recovery and matrix factor were 86.14-99.31 and 85.84-92.07%, respectively. The measurements of CLIA and UPLC-MS/MS were strongly correlated (r > 0.98). The 95% limit of agreement of the ratio of CLIA to UPLC-MS/MS was 61.66-107.40%. Further studies are warranted to confirm the results.

Lipopeptides as therapeutics: applications and in vivo quantitative analysis

A number of novel lipopeptides have been studied for their possible therapeutic potential. These studies should be supported by the appropriate analytical tools not only for novel potential drugs but also for their metabolites, precursors and side products. Lipopeptides have specific physicochemical properties that make them successful in medical applications. However, there are some difficulties with their qualitative and quantitative analyses in biological samples. Therefore, reliable, sensitive and robust analytical methods are in high demand. The main interest of our review is to describe a selection of specific and important properties of lipopeptides, and the analytical methods currently utilized for their characterization and determination in biological samples. A comparison of the pros and cons of immunomethods versus LC-MS methods is discussed in detail.

Colistin Use in Patients With Reduced Kidney Function

Colistin (polymyxin E) is a mainly concentration-dependent bactericidal antimicrobial active against multidrug-resistant Gram-negative bacteria. After being abandoned over the past 30 years due to its neuro- and nephrotoxicity, colistin has been reintroduced recently as a last-resort drug for the treatment of multidrug-resistant Gram-negative bacteria infections in combination with other antimicrobials. Unfortunately, although renal toxicity is a well-known dose-related adverse effect of colistin, relatively few studies are currently available on its peculiar pharmacodynamic/pharmacokinetic properties in clinical settings at high risk for drug accumulation, such as acute or chronic kidney disease. In these specific contexts, the risk for underdosing is also substantial because colistin can be easily removed by dialysis/hemofiltration, especially when the most efficient modalities of renal replacement therapy (RRT) are used in critically ill patients. For this reason, recent recommendations in patients undergoing RRT have shifted toward higher dosing regimens, and therapeutic drug monitoring is advised. This review aims to summarize the main issues related to chemical structure, pharmacodynamics/pharmacokinetics, and renal toxicity of colistin. Moreover, recent data and current recommendations concerning colistin dosing in patients with reduced kidney function, with special regard to those receiving RRT such as dialysis or hemofiltration, are also discussed.

A novel permanganate–morin–CdS quantum dots flow injection chemiluminescence system for sensitive determination of vancomycin

The intensity of emitted light from KMnO₄−morin−CdS QDs system is described as a novel chemiluminescence (CL) reaction. The CL intensity of this CL system was remarkably enhanced in the presence of vancomycin.

Electron transfer and fluorescence “turn-off” based CdTe quantum dots for vancomycin detection at nanogram level in aqueous serum media

Mode of interaction of GSH-CdTe QDs with vancomycin and the mechanism of the fluorescence “turn-off” process.

CuO nanosheets-enhanced flow-injection chemiluminescence system for determination of vancomycin in water, pharmaceutical and human serum

A novel, rapid and sensitive CuO nanosheets (NSs) amplified flow-injection chemiluminescence (CL) system, luminol-H2O2-CuO nanosheets, was developed for determination of the vancomycin hydrochloride for the first time. It was found that vancomycin could efficiently inhibit the CL intensity of luminol-H2O2-CuO nanosheets system in alkaline medium. Under the optimum conditions, the inhibited CL intensity was linearly proportional to the concentration of vancomycin over the ranges of 0.5-18.0 and 18.0-40.0 mg L(-1), with a detection limit (3σ) of 0.1 mg L(-1). The precision was calculated by analyzing samples containing 5.0 mg L(-1) vancomycin (n=11) and the relative standard deviation (RSD) was 2.8%. Also, a high injection throughput of 120 sample h(-1) was obtained. The CuO nanosheets were synthesized by a sonochemical method. Also, X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were employed to characterize the CuO nanosheets. The method was successfully employed to determine vancomycin hydrochloride in environmental water samples, pharmaceutical formulation and spiked human serum.

A simple quantitative method analysing amikacin, gentamicin, and vancomycin levels in human newborn plasma using ion-pair liquid chromatography/tandem mass spectrometry and its applicability to a clinical study

Neuroprotective controlled therapeutic hypothermia is the standard of care for newborns suffering perinatal asphyxia. Antibiotic drugs, such as amikacin, gentamicin, and vancomycin are frequently administered during controlled hypothermia, which possibly alters their pharmacokinetic (PK) and pharmacodynamic (PD) profiles. In order to examine this effect an LC-MS/MS method for the simultaneous quantification of amikacin, the major gentamicin components (gentamicin C, C1a and C2), and vancomycin in plasma was developed. In 25μL plasma proteins were precipitated with trichloroacetic acid (TCA) and detection of the components was achieved using ion-pair reversed phase chromatography coupled with electrospray ionization tandem mass spectrometry. The chromatographic runtime was 7.5min per sample. Calibration standards were prepared over a range of 0.3-50mgL(-1) for amikacin and gentamicin and 1.0-100mgL(-1) for vancomycin. At LLOQ accuracy was between 103 and 120% and imprecision was less than 19%. For concentrations above LLOQ accuracy ranged from 98% to 102% and imprecision was less than 6%. Process efficiency, ionization efficiency, and recovery were acceptable. Samples and stock solutions were stable during the time periods and at the different temperatures examined. The applicability of the method was shown by analysing plasma samples from 3 neonatal patients. The developed method allows accurate and precise simultaneous quantification of amikacin, gentamicin, and vancomycin in a small volume (25μL) of plasma.

Development and validation of a liquid chromatography-mass spectrometry assay for polymyxin B in bacterial growth media

There is increasing interest in the optimization of polymyxin B dosing regimens to treat infections caused by multidrug-resistant Gram-negative bacteria. We aimed to develop and validate a liquid chromatography-single quadrupole mass spectrometry (LC-MS) method to quantify polymyxin B in two growth media commonly used in in vitro pharmacodynamic studies, cation-adjusted Mueller-Hinton and tryptone soya broth. Samples were pre-treated with sodium hydroxide (1.0M) and formic acid in acetonitrile (1:100, v/v) before analysis. The summed peak areas of polymyxin B1 and B2 relative to the summed peak areas of colistin A and B (internal standard) were used to quantify polymyxin B. Quality control samples were prepared and analyzed to assess the intra- and inter-day accuracy and precision. The robustness of the assay in the presence of bacteria and commonly co-administered antibiotics (rifampicin, doripenem, imipenem, cefepime and tigecycline) was also examined. Chromatographic separation was achieved with retention times of approximately 9.7min for polymyxin B2 and 10.4min for polymyxin B1. Calibration curves were linear between 0.103 and 6.60mg/L. Accuracy (% relative error) and precision (% coefficient of variation), pooled for all assay days and matrices (n=84), were -6.85% (8.17%) at 0.248mg/L, 1.73% (6.15%) at 2.48mg/L and 1.54% (5.49%) at 4.95mg/L, and within acceptable ranges at all concentrations examined. Further, the presence of high bacterial concentrations or of commonly co-administered antibiotics in the samples did not affect the assay. The accuracy, precision and cost-efficiency of the assay make it ideally suited to quantifying polymyxin B in samples from in vitro pharmacodynamic models.