Self-assembly of zinc cadmium sulfide nanorods into nanoflowers with enhanced photocatalytic hydrogen production activity

Z-type heterojunction Pt/Zn0.2Cd0.8S/Cs3PW12O40: Mitigating photocorrosion, leveraging photochromism, and efficient photocatalytic hydrogen evolution

Catalysts are key components in the photocatalytic hydrogen precipitation process. However, commonly used catalysts such as sulfides, suffer from severe photogenerated carrier recombination and photocorrosion. To address this problem, in this work, Cs3PW12O40, polyoxometalates with reversible photochromic effect, and Zn0.2Cd0.8S with photocorrosivity are constructed to form a Z-type heterojunction to facilitate the separation of photogenerated carriers, and at the same time synergize with the unique photochromic effect of Cs3PW12O40 to mitigate photocorrosion. Moreover, by introducing the co-catalyst Pt to form a Schottky barrier, which further promotes the separation of photogenerated carriers, the Pt/Zn0.2Cd0.8S/Cs3PW12O40 Z-type heterojunction ternary composites were finally rationally designed and applied to photocatalytic hydrogen precipitation for the first time. The photocatalytic hydrogen precipitation rate of the optimal heterojunction composite was 10.4 mmol/g/h, and its apparent quantum efficiency at a single wavelength of 420 nm could reach 8.15 %. Therefore, this study provides a new strategy for alleviating the photocorrosion of sulfides and the application of polyoxometalates in photocatalytic hydrogen precipitation.

Recent Advances and Insights in Designing ZnxCd1-xS-Based Photocatalysts for Hydrogen Production and Synergistic Selective Oxidation to Value-Added Chemical Production

Combining the hydrogen (H2) extraction process and organic oxidation synthesis in photooxidation-reduction reactions mediated by semiconductors is a desirable strategy because rich chemicals are evolved as byproducts along with hydrogen in trifling conditions upon irradiation, which is the only effort. The bifunctional photocatalytic strategy facilitates the feasible formation of a C═O/C─C bond from a large number of compounds containing a X-H (X = C, O) bond; therefore, the production of H2 can be easily realized without support from third agents like chemical substances, thus providing an eco-friendly and appealing organic synthesis strategy. Among the widely studied semiconductor nanomaterials, ZnxCd1-xS has been continuously studied and explored by researchers over the years, and it has attracted much consideration owing to its unique advantages such as adjustable band edge position, rich elemental composition, excellent photoelectric properties, and ability to respond to visible light. Therefore, nanostructures based on ZnxCd1-xS have been widely studied as a feasible way to efficiently prepare hydrogen energy and selectively oxidize it into high-value fine chemicals. In this Review, first, the crystal and energy band structures of ZnxCd1-xS, the model of twin nanocrystals, the photogenerated charge separation mechanism of the ZB-WZ-ZB homojunction with crisscross bands, and the Volmer-Weber growth mechanism of ZnxCd1-xS are described. Second, the morphology, structure, modification, synthesis, and vacancy engineering of ZnxCd1-xS are surveyed, summarized, and discussed. Then, the research progress in ZnxCd1-xS-based photocatalysis in photocatalytic hydrogen extraction (PHE) technology, the mechanism of PHE, organic substance (benzyl alcohol, methanol, etc.) dehydrogenation, the factors affecting the efficiency of photocatalytic discerning oxidation of organic derivatives, and selective C-H activation and C-C coupling for synergistic efficient dehydrogenation of photocatalysts are described. Conclusively, the challenges in the applicability of ZnxCd1-xS-based photocatalysts are addressed for further research development along this line.

Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation

In this work, the self-assembled SrTiO3 (STO) microstructures were synthesized via a facile one-step solvothermal method. As the solvothermal temperature increased from 140 °C to 200 °C, the STO changed from a flower-like architecture to finally an irregularly aggregated flake-like morphology. The photocatalytic performance of as-synthesized samples was assessed through the degradation of rhodamine B (RhB) and malachite green (MG) under simulated solar irradiation. The results indicated that the photocatalytic performance of STO samples depended on their morphology, in which the hierarchical flower-like STO synthesized at 160 °C demonstrated the highest photoactivities. The photocatalytic enhancement of STO-160 was benefited from its large surface area and mesoporous configuration, hence facilitating the presence of more reactive species and accelerating the charge separation. Moreover, the real-world practicality of STO-160 photocatalysis was examined via the real printed ink wastewater-containing RhB and MG treatment. The phytotoxicity analyses demonstrated that the photocatalytically treated wastewater increased the germination of mung bean seeds, and the good reusability of synthesized STO-160 in photodegradation reaction also promoted its application in practical scenarios. This work highlights the promising potential of tailored STO microstructures for effective environmental remediation applications.

Bio-photoelectrochemical degradation, and photocatalysis process by the fabrication of copper oxide/zinc cadmium sulfide heterojunction nanocomposites: Mechanism, microbial community and antifungal analysis

In this work, the fabrication of the CuO on ZnCdS as a heterojunction nanocomposites were conducted by hydrothermal method and the synthesis method was confirmed by the XRD, XPS, EDS, UV-vis spectrum analysis. The CuO/ZnCdS was used as a photocathode in the bio-photoelectrochemical system (BPES) for tetracycline (TC) degradation under solar irradiation. The CuO/ZnCdS photocathode indicated substantial photocatalytic efficiency for TC degradation, due to the fast separation and transfer of photogenerated carriers. The ESR test evaluates the mechanism of degradation, and shows that ·OH, and ·O₂^- were contributed to TC degradation. The TC degradation was 1.59 times higher than the unilluminated process (98.72% vs 61.71). The photocatalysis test shows that the TC was degraded about 90.5% in 1.5 h. Then, the synthesized CuO/ZnCdS nanocomposites were studied for the biological application such as antifungal activities. CuO/ZnCdS nanocomposites depicted substantial antimicrobial activity versus Candida-albicans by in vitro process. Therefore, this study suggests the novel system for the antibiotics degradation, and as antifungal application.

Heterostructured ZnCdS@ZIF-67 as a Photocatalyst for Fluorescent Dye Degradation and Selectively Nonenzymatic Sensing of Dopamine

Dopamine (DA) plays the role of the transmitter of information in the brain. Neurological diseases and depression are in close relationship with DA release. In this study, we developed a co-catalyst Zn_0.2Cd_0.8S@zeolitic imidazolate framework-67 (Zn_0.2Cd_0.8S@ZIF-67) to improve the photocatalyst efficacy of Rhodamine B (RhB) and electrochemical sensing of DA. Results show that Zn_0.2Cd_0.8S@ZIF-67 exhibits optimal photocatalytic activity with the addition of 80 mg ZIF-67. The degradation percentage of RhB by Zn_0.2Cd_0.8S@ZIF-67 reached 98.40% when the co-catalyst was 50 mg. Radical trapping experiments show that ·O₂^- played a significant role in the photocatalytic degradation of RhB. The catalytic mechanism of the Zn_0.2Cd_0.8S@ZIF-67 was found as a Z-type photocatalysis. Finally, a DA biosensor was constructed and displayed a high response and selectivity to DA. This can be attributed to the heterojunction between Zn_0.2Cd_0.8S and ZIF-67, which can significantly enhance the separation of e^-/h⁺ and improve charge transfer. These findings will play a positive role in the in-situ monitoring of neurological diseases and depression.

One-pot synthesis of Zn-CdS@C nanoarchitecture with improved photocatalytic performance toward antibiotic degradation

In this paper, carbon-coated Zn doped CdS core-shell photocatalyst (Zn-CdS@C) was fabricated via one-pot solvothermal method. The obtained Zn-CdS@C architectures displayed enhanced performance in photocatalytic antibiotic removal process. The Zn doped sites and carbon shell could all contribute to the prolonged lifetime of charge carriers and furthermore, result in the improved photoactivity. Moreover, the carbon shell could effectively improve the corrosion resistance of sulfide photocatalyst. We hope this study could provide novel insights into the fabrication of highly-efficient carbon-coated core-shell nanostructure toward wastewater treatment.

2D CeO2 and a Partially Phosphated 2D Ni-Based Metal-Organic Framework Formed an S-Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution

Here, an S-scheme heterojunction was constructed on the basis of the modification of a Ni-based metal-organic framework (Ni-MOF) by different in situ treatment strategies. First, NiS₂, NiO, and Ni₂P were derived in situ on the surface of Ni-MOF through surface sulfonation, oxidation, and phosphatizing treatments. They can efficiently accept the electrons from the conduction band of Ni-MOF as the trap centers, thus improving the hydrogen production activity. Additionally, phosphatizing makes the electronegativity of Ni-MOF/P stronger than that of the original Ni-MOF, which can enhance the absorption of protons, thus promoting the hydrogen evolution reaction. Next, the S-scheme heterojunction was successfully built by the coupling of 2D CeO₂ with Ni-MOF/P. The maximum hydrogen production rate of the hybrid catalyst (6.337 mmol g^-1 h^-1) is 14.18 times that of the untreated Ni-MOF due to the full utilization of photo-induced electrons. Finally, the probable hydrogen evolution mechanism was proposed by analyzing a series of characterization results and by the density functional theory (DFT) calculation.

Synergetic Piezo-Photocatalytic Hydrogen Evolution on Cdx Zn1-x S Solid-Solution 1D Nanorods

Conversion of solar and mechanical vibration energies for catalytic water splitting into H₂ has gained substantial attention recently. However, the sluggish charge separation and inefficient energy utilization in photocatalytic and piezocatalytic processes severely restrict the catalytic activity. In this paper, efficient piezo-photocatalytic H₂ evolution from water splitting is realized via simultaneously converting solar and vibration energy over one-dimensional (1D) nanorod-structured Cd_x Zn_1-x S (x = 0, 0.2, 0.4, 0.6, 0.8, 1) solid solutions. Under combined visible light and ultrasound irradiation, Cd_0.4 Zn_0.6 S 1D nanorods deliver a prominently synergetic piezo-photocatalytic H₂ yield rate of 4.45 mmol g^-1  h^-1 , far exceeding that under sole ultrasound or illumination. The consumedly promoted catalytic activity of Cd_0.4 Zn_0.6 S is attributed to strengthened charge separation by piezo-potential as disclosed by light-assisted scanning Kelvin probe force microscopy (SKPFM), increased strain sensitivity, and desirable optimization between piezoelectricity and visible-light response due to the formation of 1D configuration and solid solution. Metal and metal oxide depositions disclose that reduction and oxidation reactions separately occur at the tips and lateral edges of the Cd_0.4 Zn_0.6 S nanorods, in which the spatially separated reactive sites also contribute to super catalytic activity. This work is expected to inspire a new design strategy of coupled catalysis reactions for efficient renewable fuel production.

Thioacetamide promotes osteoclast transformation of bone marrow macrophages by influencing PI3K/AKT pathways

Background

Osteoclast cell increase is a major risk factor for osteoporosis and degenerative bone and joint diseases. At present, RANKL and M-CSF are commonly used to induce osteoclastogenesis. Thioacetamide (TAA) can lead to many types of liver and kidney damage, but less attention has been paid to the association of TAA with bone damage. In this work, we investigated the effects of TAA on the osteoclastogenesis and differentiation of bone marrow macrophages (BMMs).

Methods

BMMs of SD rat suckling mice were taken for primary culture. CCK-8 was used to detect the toxic effects of TAA on BMMs, and flow cytometry was used to detect the effects of TAA on the cell cycle, cell viability, apoptosis and intracytoplasmic Ca2+ concentration of BMMs. TRAP staining was used to detect the effect of RANKL and M-CSF and TAA on osteoclast differentiation of BMMs. Western Blot was used to detect the expression level of PI3K/AKT pathway and osteoclast-specific proteins (TRAP and cathepsin K).

Results

The results suggested that TAA inhibited the proliferation of BMMs, while enhancing osteoclastogenesis at 0.5 mg/mL and 1 mg/mL as assayed by TRAP staining. Exposed to TAA, BMMs could differentiate into osteoclast-like cells with overexpression of cathepsin K and TRAP proteins. Western blot results showed that TAA can activate the expression levels of P-PI3K, P-AKT, P-P38, and P-JNK, accompanied by apoptosis of BMMs and increase in intracellular Ca2+.

Conclusion

TAA may induce osteoclast formation in BMMs by activating the expression of PI3K/AKT pathway proteins, which is comparable to the classic osteoclast differentiation inducer RANKL and M-CSF. This suggests that we may find a cheap osteoclast inducer.

Defect-rich cobalt pyrophosphate hybrids decorated Cd0.5Zn0.5S for efficient photocatalytic hydrogen evolution: Defect and interface engineering

Photocatalysts with highly efficient charge separation are of critical significance for improving photocatalytic hydrogen production performance. Herein, a cost-effective and high-performance composite photocatalyst, cobalt-phosphonate-derived defect-rich cobalt pyrophosphate hybrids (CoPPi-M) modified Cd_0.5Zn_0.5S is rationally devised via defect and interface engineering, in which the co-catalyst CoPPi-M delivers a strong interaction with host photocatalyst Cd_0.5Zn_0.5S, rendering Cd_0.5Zn_0.5S/CoPPi-M with a remarkably improved efficiency of charge separation and migration. Besides, Cd_0.5Zn_0.5S/CoPPi-M exhibits a hydrophilic surface with ample access to electrons and a strong reduction ability of electrons. Benefiting from these advantages, the integration of defect-rich cobalt pyrophosphate and Cd_0.5Zn_0.5S enables Cd_0.5Zn_0.5S/CoPPi-M-5% with high photocatalytic H₂ production rate of 6.87 mmol g^-1h^-1, which is 2.46 times higher than that of pristine Cd_0.5Zn_0.5S, and the notable apparent quantum efficiency (AQE) is 20.7% at 420 nm. This work provides a promising route for promoting the photocatalytic performance of non-precious hybrid photocatalyst via defect and interface engineering, and advances energy-generation and environment-restoration devices.

Transition metal phosphide of nickel and cobalt-modified Zn0.5Cd0.5S for efficient photocatalytic hydrogen evolution with visible light irradiation

Three transition metal phosphating compounds (NiCoP, Ni2P and Co2P) were loaded on Zn0.5Cd0.5S respectively. Among them, the Zn0.5Cd0.5S/NiCoP composite photocatalyst has the best hydrogen evolution activity.

ZIF-67 derived hierarchical hollow Co3S4@Mo2S3 dodecahedron with an S-scheme surface heterostructure for efficient photocatalytic hydrogen evolution

Using ZIF-67 as a template, and the continuous temperature-raising hydrothermal method to built a heterojunction between Co3S4 and Mo2S3, this strategy synthesized a highly efficient Co3S4@Mo2S3 composite with a stable rhombohedral structure.

Engineering a NiAl-LDH/CoSx S-Scheme heterojunction for enhanced photocatalytic hydrogen evolution

The use of semiconductors to construct heterojunctions to suppress the rapid recombination of photogenerated charges and holes is considered to be an effective way to improve the efficiency of photocatalytic hydrogen evolution. Herein, cobalt sulfide (CoS_x) nanoparticles are cultivated in situ in the folds of three-dimensional flower-like nickel-aluminium layered double hydroxides (NiAl-LDHs) using a facile solvothermal method. The hydrogen production rate of the binary CoS_x/NiAl-LDH heterojunction reaches 3678.59 μmol/g/h, which is 83.74 and 22 times the rates of CoS_x and NiAl-LDH, respectively. The unique three-dimensional structure of NiAl-LDH facilitates the growth of CoS_x and shortens the transfer pathway of photogenerated electrons. More importantly, the built-in electric field formed at the interface and the S-type charge transport mechanism caused by the bending of the energy band enhance not only charge separation but also maintain the strong oxidation ability of the holes. In this study, the newly designed S-scheme heterojunction offers a new strategy for enhancing photocatalytic water splitting.

MoP@MoO3 S-scheme heterojunction in situ construction with phosphating MoO3 for high-efficient photocatalytic hydrogen production

As important artificial photosynthesis, the construction of core-shell heterojunction materials is considered to be one of the effective strategies for designing highly active photocatalysts. Here, the Step-scheme (S-scheme) heterojunction photocatalyst is firmly grown by in situ phosphating. The calcination method uses MoO₃ nanoparticles as the substrate, and the surface of MoO₃ is phosphatized and etched gradually from the outside to the inside using the phosphine gas. The introduced phosphorus atoms can replace MoO₃ oxygen atoms to form Mo-P bonds to generate molybdenum phosphide. The interface interaction dominated by chemical bonds has a stronger interface interaction force, which can promote the interface charge transfer leading to optimizing the MoP@MoO₃ core-shell composite material, adjusting the quality of sodium hypophosphite, and phosphating MoO₃ to varying degrees, producing the best hydrogen production H₂ evolution rate is 10 000.02 μmol h^-1 g^-1. Density functional theory (DFT) calculations and a series of experiments were used to determine the S-scheme charge transfer mechanism in MoP@MoO₃. This design provides a new idea for the introduction of surface-active sites and the construction of mixed anion photocatalysts. At the same time, a new design scheme is provided for the in situ construction of S-scheme interface heterojunction materials.

Construction of CoS2 /Zn0.5 Cd0.5 S S-Scheme Heterojunction for Enhancing H2 Evolution Activity Under Visible Light

In the field of photocatalysis, building a heterojunction is an effective way to promote electron transfer and enhance the reducibility of electrons. Herein, the S-scheme heterojunction photocatalyst (CoS₂ /Zn_0.5 Cd_0.5 S) of CoS₂ nanospheres modified Zn_0.5 Cd_0.5 S solid solution was synthesized and studied. The H₂ evolution rate of the composite catalyst reached 25.15 mmol g^-1  h^-1 , which was 3.26 times that of single Zn_0.5 Cd_0.5 S, whereas pure CoS₂ showed almost no hydrogen production activity. Moreover, CoS₂ /Zn_0.5 Cd_0.5 S had excellent stability and the hydrogen production rate after six cycles of experiments only dropped by 6.19 %. In addition, photoluminescence spectroscopy and photoelectrochemical experiments had effectively proved that the photogenerated carrier transfer rate of CoS₂ /Zn_0.5 Cd_0.5 S was better than CoS₂ or Zn_0.5 Cd_0.5 S single catalyst. In this study, the synthesized CoS₂ and Zn_0.5 Cd_0.5 S were both n-type semiconductors. After close contact, they followed an S-scheme heterojunction electron transfer mechanism, which not only promoted the separation of their respective holes and electrons, but also retained a stronger reduction potential, thus promoting the reduction of H⁺ protons in photocatalytic experiments. In short, this work provided a new basis for the construction of S-scheme heterojunction in addition to being used for photocatalytic hydrogen production.

Strategy of Graphdiyne (g-Cn H2n-2 ) Preparation Coupling with the Flower-Like NiAl-LDH Heterojunctions for Efficient Photocatalytic Hydrogen Evolution*

Graphdiyne (g-C_n H_2n-2 ), a novel two-dimension carbon allotrope material composed of a sp- and sp² -hybrid carbon network, has been widely explored since it was synthesized for the first time by Li's group in 2010. A series distinct and excellent properties bestow graphdiyne excellent performance in many fields. Here, an innovative progress for preparing graphdiyne by using Cu⁺ contained material as catalyst is reported and the composite CuI-GD is coupled with flower-like NiAl-LDH to produce H₂ from photocatalytic water splitting. The results of FTIR and Raman spectroscopy together reveal that graphdiyne nanosheets are synthesized successfully by employing a cross-coupling method. Photocatalytic hydrogen evolution performance shows that the hydrogen production activity of CuI-GD/NiAl-LDH has a 15- and 216-fold enhancement compared with CuI-GD and NiAl-LDH, respectively. A series of characterizations are carried out to expound the underlying reasons in the enhancement of the photocatalytic hydrogen production performance of CuI-GD/NiAl-LDH. Meanwhile, a possible mechanism for the photocatalytic hydrogen evolution process was proposed to understand the interaction among these materials.

Facile preparation of Zn x Cd1-x S/ZnS heterostructures with enhanced photocatalytic hydrogen evolution under visible light

Hydrogen evolution from water using solar energy is regarded as a most promising process, thus, exploring efficient photocatalysts for water splitting is highly desirable. To avoid the rapid recombination of photogenerated electrons and holes in CdZnS semiconductors, Zn_xCd_1−xS/ZnS composites were synthesized via a one-step hydrothermal method and then annealed at 400 °C for 60 min under argon flow. Zn_xCd_1−xS/ZnS composites are composed of ZnS nanosheets decorated with Zn_xCd_1−xS nanorods, and TEM and UV-vis absorption spectra confirm the formation of the heterostructure between Zn_xCd_1−xS nanorods and ZnS nanosheets. Because of the well-matched band alignment, stronger optical absorption and larger carrier density, Zn_0.2Cd_0.8S/ZnS has the highest hydrogen production, with a photocatalytic hydrogen production rate up to 16.7 mmol g⁻¹ h⁻¹ under visible light irradiation. Moreover, the photocatalyst also exhibits high stability and good reusability for hydrogen production reaction. The facile and efficient approach for ZnS based heterostructures could be extended to other metal compound materials.

Schematic illustration for electron charge transfer and H₂ evolution mechanism for the Zn_0.2Cd_0.8S/ZnS nanocomposites.

Controlled Biosynthesis of ZnCdS Quantum Dots with Visible-Light-Driven Photocatalytic Hydrogen Production Activity

The development of visible-light-responsive photocatalysts with high efficiency, stability, and eco-friendly nature is beneficial to the large-scale application of solar hydrogen production. In this work, the production of biosynthetic ternary ZnCdS photocatalysts (Eg = 2.35-2.72 eV) by sulfate-reducing bacteria (SRB) under mild conditions was carried out for the first time. The huge amount of biogenic S2- and inherent extracellular proteins (EPs) secreted by SRB are important components of rapid extracellular biosynthesis. The ternary ZnCdS QDs at different molar ratios of Zn2+and Cd2+ from 15:1 to 1:1 were monodisperse spheres with good crystallinity and average crystallite size of 6.12 nm, independent of the molar ratio of Cd2+ to Zn2+. All the ZnCdS QDs had remarkable photocatalytic activity and stability for hydrogen evolution under visible light, without noble metal cocatalysts. Especially, ZnCdS QDs at Zn/Cd = 3:1 showed the highest H2 production activity of 3.752 mmol·h-1·g-1. This excellent performance was due to the high absorption of visible light, the high specific surface area, and the lower recombination rate between photoexcited electrons and holes. The adhered inherent EPs on the ZnCdS QDs slowed down the photocorrosion and improved the stability in photocatalytic hydrogen evolution. This study provides a new direction for solar hydrogen production.

Soluble polyfluorene dots as photocatalyst for light-driven methylene blue degradation and hydrogen generation

The soluble Pdots based on poly(9,9-dioctylfluorene) were introduced as a photocatalyst for photodegradation activity and light-driven hydrogen generation.

Ni-MOF-74 derived nickel phosphide and In2O3 form S-scheme heterojunction for efficient hydrogen evolution

The composite structure of Ni2P/In2O3 constructs an S-scheme heterojunction that transfers useless electrons and holes to the composite interface for consumption.The loading of In2O3 further increases the photocatalytic hydrogen production activity.

Mesoporous CdxZn1-xS with abundant surface defects for efficient photocatalytic hydrogen production

The practical application of photocatalytic water splitting for hydrogen evolution hinges on the development of high-efficient and low-cost photocatalysts. Defects engineering has emerged as a promising strategy to enhance photocatalytic activity effectively. Herein, a facile and versatile co-precipitation method is proposed to fabricate mesoporous Cd-Zn-S solid solutions (E-Cd_xZn_1-xS) with abundant surface defects by the inorganic salts formed in the reaction system as self-template. Compared with Cd-Zn-S solid solutions (W-Cd_0.65Zn_0.35S) prepared by the traditional co-precipitation method, the enhanced specific surface area and abundant surface defects endow E-Cd_0.65Zn_0.35S with more accessible active sites and effective separation of electron-hole pairs for the photocatalytic water splitting reaction. The E-Cd_0.65Zn_0.35S solid solution exhibits hydrogen evolution rate of 5.2 mmol h^-1 g^-1 without loading noble metal as cocatalyst under visible light, which is 1.13 times higher than that of W-Cd_0.65Zn_0.35S sample. The present work provides a simple, low-cost and prospective strategy for the synthesis of defective Cd-Zn-S solid solutions, and it also delivers guidance to design and develop the advanced visible-light photocatalyst in the future.