Novel platinum-bismuth alloy loaded KTa0.5Nb0.5O3 composite photocatalyst for effective nitrogen-to-ammonium conversion

Using the Photo-Piezoelectric Effect of AuPt@BaTiO3 Oxidase Mimetics for Colorimetric Detection of GSH in Serum

Nanozymes possess major advantages in catalysis and biosensing compared with natural nanozymes. In this study, the AuPt@BaTiO3 bimetallic alloy Schottky junction is prepared to act as oxidase mimetics, and its photo-piezoelectric effect is investigated. The synergy between the photo-piezoelectric effect and the local surface plasmon resonance enhances the directional migration and separation of photogenerated electrons, as well as hot electrons induced by the AuPt bimetallic alloy. This synergy significantly improves the oxidase-like activity. A GSH colorimetric detection platform is developed based on this fading principle. Leveraging the photo-piezoelectric effect allows for highly sensitive detection with a low detection limit (0.225 μM) and reduces the detection time from 10 min to 3 min. The high recovery rate (ranging from 99.91% to 101.8%) in actual serum detection suggests promising potential for practical applications. The development of bimetallic alloy heterojunctions presents new opportunities for creating efficient nanozymes.

Enhanced Photocatalytic Nitrogen Reduction via Bismuth Nanoparticle-Decorating ZnCdS Solid Solution

The construction of photocatalysts with a surface plasmon resonance effect (SPR) has been demonstrated as a highly effective strategy for enhancing photocatalytic efficiency. In this paper, we synthesized a catalyst with bismuth metal loaded on ZnCdS nanospheres for an efficient photocatalytic nitrogen reduction reaction (PNRR). The SPR effect induced by Bi nanoparticles under light excitation significantly promoted the ammonia production efficiency of the photocatalyst. Under air ambient conditions with lactic acid as the sacrificial agent, the photocatalytic NH4+ yield of 3% Bi@ZnCdS was 58.93 μmol·g-1·h-1, which exhibited an approximately 7.7 times that of the pure phase ZnCdS. The experimental characterization results demonstrate that the incorporation of metallic bismuth enhances the light absorption capacity of the catalyst and improves the separation efficiency of the photogenerated carriers. Theoretical calculations proved that Bi NPs provide more photogenerated electrons to convert N2 to NH3 for solid-solution ZnCdS. This work presents a novel concept for the development of advanced plasma nanomaterials to enhance the photocatalytic nitrogen fixation reaction.

Photocatalytic Enhancement Strategy with the Introduction of Metallic Bi: A Review on Bi/Semiconductor Photocatalysts

Semiconductor photocatalysis has great potential in the fields of solar fuel production and environmental remediation. Nevertheless, the photocatalytic efficiency still constrains its practical production applications. The development of new semiconductor materials is essential to enhance the solar energy conversion efficiency of photocatalytic systems. Recently, the research on enhancing the photocatalytic performance of semiconductors by introducing bismuth (Bi) has attracted widespread attention. In this review, we briefly overview the main synthesis methods of Bi/semiconductor photocatalysts and summarize the control of the micromorphology of Bi in Bi/semiconductors and the key role of Bi in the catalytic system. In addition, the promising applications of Bi/semiconductors in photocatalysis, such as pollutant degradation, sterilization, water separation, CO2 reduction, and N2 fixation, are outlined. Finally, an outlook on the challenges and future research directions of Bi/semiconductor photocatalysts is given. We aim to offer guidance for the rational design and synthesis of high-efficiency Bi/semiconductor photocatalysts for energy and environmental applications.

Synthesis and characterization of Black Au nanoparticles deposited over g-C3N4 nanosheets: enhanced photocatalytic degradation of methylene blue

Black AuNPs, prepared by a facile seeding growth method under ambient conditions, displayed efficient broadband absorption of the incident light over the entire visible and near-infrared regions of the solar spectrum. The spherical black AuNPs with the size of 2-4 nm were deposited over mesoporous g-C3N4 nanosheets. Novel black AuNPs/g-C3N4 plasmonic photocatalysts were used to remove methylene blue (MB) dye from an aqueous solution. The degradation efficiency for the optimal coupling of 1.3 wt.% black AuNPs with g-C3N4 (1.2 g) was found to be 85% within 60 min under visible light irradiation. The calculated kinetic constant was 0.0186 min-1 which was 6.4 and 2.9 times greater than those for g-C3N4 and AuNPs/g-C3N4 nanocomposite, respectively. The excellent potential in photocatalysis was attributed to the synergistic interactions of the g-C3N4 conduction band and the localized surface plasmon resonance effect of black AuNPs. These properties were responsible for the generation of high-energy electrons, a negative shift in the Fermi level of black AuNPs, and the migration of charge carriers. This work studied a new insight into black gold nanoparticles via the design of a visible-light-driven photocatalyst and provided a perspective on valuable photo-related applications such as water treatment.

Facile transfer of surface plasmon electrons of Au-NPs to Zn3V2O8 surfaces: a case study of sunlight driven H2 generation from water splitting

For future energy perspectives, an effective way to produce H2 from water splitting is suggested using Zn3V2O8 photocatalyst as a semiconductor support. Further, to enhance the catalytic efficiency and stability of the catalyst, gold metal was deposited over the Zn3V2O8 surface by a chemical reduction method. For comparison, the Zn3V2O8 and gold-fabricated catalysts (i.e., Au@Zn3V2O8) were used for water splitting reactions. For structural and optical properties, various techniques, including XRD, UV-Vis DRS, FTIR, PL, Raman, SEM, EDX, XPS and EIS were used for the characterizations. The scanning electron microscope revealed the pebble-shaped morphology of the Zn3V2O8 catalyst. The FTIR and EDX results confirmed the purity and structural and elemental composition of the catalysts. Overall, 7.05 mmol g-1 h-1 H2 generation was observed over Au1.0@Zn3V2O8, which was ten times higher than bare Zn3V2O8. The results revealed that the higher H2 activities could be attributed to the Schottky barriers and surface plasmon electrons (SPRs). Thus the Au@Zn3V2O8 catalysts have potential to deliver higher hydrogen generation than Zn3V2O8 by water splitting.

One-step fabrication of Cu-doped Bi2MoO6 microflower for enhancing performance in photocatalytic nitrogen fixation

This study enhances the photocatalytic N₂ immobilization performance of Bi₂MoO₆ through Cu doping. Cu-doped Bi₂MoO₆ was synthesized via a simple solvothermal method. Various characterizations were implemented to examine the influence of Cu doping on the properties of Bi₂MoO₆. Results indicated that the doped Cu element had a valence state of + 2 and substituted the position of Bi³⁺. Cu doping exerted minimal effect on the morphology of Bi₂MoO₆ but largely influenced the energy band structure. The band gap was slightly narrowed, and the conduction band was raised, such that Cu-doped Bi₂MoO₆ could generate more electrons with stronger reducibility. Moreover, importantly, Cu doping reduced work function and improved charge separation efficiency, which was considered the major cause of enhanced photoactivity. In addition, the Cu-Bi₂MoO₆ catalyst exhibited higher capability in the adsorption and activation of N₂. Under the combined effects of the aforementioned changes, Cu-Bi₂MoO₆ demonstrated considerably higher photocatalytic efficiency than Bi₂MoO₆. The optimized NH₃ generation rate reached 302 μmol/L g^-1h^-1 and 157 μmol/L g^-1h^-1 under simulated solar light and visible light, respectively, both achieving about 2.2 times higher than that of Bi₂MoO₆. This work provides a successful example of improving photocatalytic N₂ fixation, and it may show some light on the design and preparation of heteroatom-doped semiconductor photocatalysts for N₂-to-NH₃ conversion.

Preparation of NaNbO3 microcube with abundant oxygen vacancies and its high photocatalytic N2 fixation activity in the help of Pt nanoparticles

In this study, the photocatalytic N₂ immobilization performance of NaNbO₃ is enhanced via oxygen vacancy introduction and Pt loading. The designed Pt-loaded NaNbO₃ with rich oxygen defects (Pt/O-NaNbO₃) is synthesized by combining ion-exchange and photodeposition methods. Characterization result indicates that the O-NaNbO₃ has hollow microcube morphology and higher surface area than NaNbO₃. The introduced oxygen defects greatly affect the energy band structure. The band gap is slightly narrowed and the conduction band is raised, allowing O-NaNbO₃ to generate electrons with strong reducibility. Moreover, the oxygen defects reduced the work function of NaNbO₃, leading to increased charge separation in the bulk phase. The loaded Pt nanoparticles can further increase the surface charge separation via the formed Schottky barriers between Pt and O-NaNbO₃, which was thought to be the primary cause of the increased photocatalytic activity. Additionally, the oxygen vacancies and metal Pt also contribute to the adsorption and activation of N₂. Under the combined effect of the above changes, Pt/O-NaNbO₃ presents much higher photoactivity than NaNbO₃. The optimized NH₃ production rate reaches 293.3 μmol/L g^-1h^-1 under simulated solar light, which is approximately 2.2 and 20.2 times higher than that of O-NaNbO₃ and NaNbO₃, respectively. This research offers a successful illustration of how to improve photocatalytic N₂ fixation and may shed some light on how to design and construct efficient photocatalysts by combining several techniques.

Novel Bi2WO6/ZnSnO3 heterojunction for the ultrasonic-vibration-driven piezocatalytic degradation of RhB

This study designed and prepared a new piezoelectric catalytic nanomaterial, Bi₂WO₆/ZnSnO₃, and applied it in piezocatalytic water purification. Results indicated that the composite had superior piezocatalytic efficiency and stability in rhodamine B (RhB) degradation under ultrasonic vibration. The Bi₂WO₆/ZnSnO₃ sample with 10% Bi₂WO₆ had the optimum activity with a degradation rate of 2.15 h^-1, which was 7.4 and 11.3 times that of ZnSnO₃ and Bi₂WO₆, respectively. Various characterizations were conducted to study the morphology, structure, and piezoelectric properties of the Bi₂WO₆/ZnSnO₃ composites and reveal the reasons for their improved piezocatalytic performance. Results showed that ZnSnO₃ cubes were dispersed throughout the surface of Bi₂WO₆ nanosheets, which enhanced the specific surface area and facilitated the piezocatalytic reaction. Additionally, type-II heterojunction structures formed at the contact interface of Bi₂WO₆ and ZnSnO₃, driving the migration of piezoelectric-induced electrons and holes. Accordingly, the separation efficiency of charge carriers improved, and the piezoelectric catalytic activity was significantly enhanced. This study may provide a potential composite catalyst and a promising idea for the design of highly efficient piezoelectric catalyst.

Enhanced photocatalytic degradation of tetracycline by a H2O2-assisted Bi3NbO7/Bi2Sn2O7 composite under visible light

A Z-scheme BNO/BSO composite photocatalyst has been successfully prepared using an in situ solvothermal method. The phase component, microstructure and optical properties of the as-prepared samples were characterized using X-ray diffractometry, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence spectroscopy and other means. The photocatalytic performance of the BNO/BSO composite was evaluated via the degradation of the typical antibiotic tetracycline (TC) under hydrogen peroxide assistance and visible light irradiation. The "cata + H₂O₂ + vis" system shows the best photocatalytic activity, and its apparent rate constant reaches 0.03164 min^-1, which is 4.9 times and 5.7 times that of the "cata + vis" system and the "cata + H₂O₂" system, respectively. Compared with pristine that of BSO alone, the reaction rate constant of the 15% BNO/BSO composite increases 1.8 times. The enhanced photocatalytic activity is attributed to the construction of a unique Z-scheme-type heterojunction, which effectively suppresses the recombination of electron-hole pairs. In addition, the addition of H₂O₂ promotes the generation of more active species. Moreover, a possible photocatalytic degradation mechanism is also further proposed.

Crystal phase engineering of Ru for simultaneous selective photocatalytic oxidations and H2 production

Noble metal nanoparticles are often used as cocatalysts to enhance the photocatalytic efficiency. While the effect of cocatalyst nanoparticle size and shape has widely been explored, the effect of the crystal phase is largely overlooked. In this work, we investigate the effect of Ru nanoparticle crystal phase, specifically regular hexagonal close-packed (hcp) and allotropic face-centered cubic (fcc) crystal phases, as cocatalyst decorated onto the surface of TiO₂ photocatalysts. As reference photocatalytic reaction the simultaneous photocatalytic production of benzaldehyde (BAD) and H₂ from benzyl alcohol was chosen. Both the fcc Ru/TiO₂ and hcp Ru/TiO₂ composites exhibit enhanced BAD and H₂ production rates compared to pristine TiO₂ due to the formation of a Schottky barrier promoting the photogenerated charge separation. Moreover, a 1.9-fold photoactivity enhancement of the fcc Ru/TiO₂ composite is achieved as compared to the hcp Ru/TiO₂ composite, which is attributed to the fact that the fcc Ru NPs are more efficient in facilitating the charge transfer as compared to hcp Ru NPs, thus inhibiting the recombination of electron-hole pairs and enhancing the overall photoactivity.

A novel NiO/BaTiO3 heterojunction for piezocatalytic water purification under ultrasonic vibration

This work designed and prepared a novel heterojunction composite NiO/BaTiO₃ through a method of photodeposition and used it in piezocatalytic dye removal for the first time. Results of the piezocatalytic test indicated that the NiO/BaTiO₃ composite presented superior efficiency and stability in the RhB degradation under the vibration of ultrasonic waves. The best NiO/BaTiO₃ sample synthesized under light irradiation for 2 h displayed an RhB degradation rate of 2.41 h^-1, which was 6.3 times faster than that of pure BaTiO₃. By optimizing the piezocatalytic reaction conditions, the degradation rate constant of NiO/BaTiO₃ can further reach 4.14 h^-1 A variety of systematic characterizations were executed to determine the reason for the excellent piezocatalytic performance of NiO/BaTiO₃. The band potentials of NiO and BaTiO₃ are found to coincide, and at their contact interface, they may create a type-II p-n heterojunction structure. Driven by the potential difference and the built-in electric field, piezoelectrically enriched charge carriers can migrate between NiO and BaTiO₃, resulting in improved efficiency in charge separation and an increase in the piezoelectric catalytic performance. This study may provide a potential composite catalyst and a promising idea for the design of highly efficient catalysts in the field of piezoelectric catalysis.

Long-lasting photocatalytic activity of trace phosphorus-doped g-C3N4/SMSO and its application in antibacterial ceramics

Conventional photocatalysts generate numerous active species-primarily hydroxyl radicals (•OH)-under solar light excitation to exert photocatalytic activity for especially antibacterial effects. However, the light dependence limits their competitiveness against other antimicrobial materials since they do not work at night. Herein, a P-g-C₃N₄/Sr₂MgSi₂O₇:Eu²⁺,Dy³⁺ (P-g-C₃N₄/SMSO) composite day-night photocatalyst is synthesized, using a model methyl orange (MO) substrate, and the impacts of trace P doping and the SMSO composite on the activity of the photocatalyst in MO degradation is investigated; Its antibacterial effect against Escherichia coli and Staphylococcus aureus on ceramic surfaces is further examined. The morphology, structure, and composition of the photocatalyst are characterized by SEM, TEM, XRD, FT-IR, and UV-vis DRS. Finally, the photocatalytic mechanism is elucidated through active species capture experiments and ESR testing. P doping and the SMSO heterojunction structure reduce the width of the forbidden band of g-C₃N₄ and broaden its visible-light-response range. Moreover, SMSO acts as a light source to realize long-lasting photocatalytic performance of the composite, even in the dark. The photocatalytic process produces •O₂^-, ¹O₂, and h⁺ active species, with •O₂^- and ¹O₂ playing the dominant role-instead of •OH as previously thought.