Encapsulation of Thermo-responsive Gel in pH-sensitive Polymersomes as Dual-Responsive Smart carriers for Controlled Release of Doxorubicin

Nanoscale strategies: doxorubicin resistance challenges and enhancing cancer therapy with advanced nanotechnological approaches

Doxorubicin (DOX), an anthracycline, is widely used in cancer treatment by interfering RNA and DNA synthesis. Its broad antitumour spectrum makes it an effective therapy for a wide array of cancers. However, the prevailing drug-resistant cancer has proven to be a significant drawback to the success of the conventional chemotherapy regime and DOX has been identified as a major hurdle. Furthermore, the clinical application of DOX has been limited by rapid breakdown, increased toxicity, and decreased half-time life, highlighting an urgent need for more innovative delivery methods. Although advancements have been made, achieving a complete cure for cancer remains elusive. The development of nanoparticles offers a promising avenue for the precise delivery of DOX into the tumour microenvironment, aiming to increase the drug concentration at the target site while reducing side effects. Despite the good aspects of this technology, the classical nanoparticles struggle with issues such as premature drug leakage, low bioavailability, and insufficient penetration into tumours due to an inadequate enhanced permeability and retention (EPR) effect. Recent advancements have focused on creating stimuli-responsive nanoparticles and employing various chemosensitisers, including natural compounds and nucleic acids, fortifying the efficacy of DOX against resistant cancers. The efforts to refine nanoparticle targeting precision to improve DOX delivery are reviewed. This includes using receptor-mediated endocytosis systems to maximise the internalisation of drugs. The potential benefits and drawbacks of these novel techniques constitute significant areas of ongoing study, pointing to a promising path forward in addressing the challenges posed by drug-resistant cancers.

Recent progress of natural materials-based hydrogel for postoperative chemotherapy

Hydrogels have been widely used for in situ postoperative chemotherapy due to fewer side effects and longer duration of drug action compared to systemic chemotherapy. This paper reviews the application of natural materials-based hydrogels after tumor resection to explore them as an option for postoperative chemotherapy. Different material-based hydrogels, different response-based hydrogels, and the clinical applications of implantable, injectable, and sprayed hydrogels were investigated and summarized. Based on the main content, we report the possible clinical application prospects and typical functions of hydrogel-based local drug delivery systems.

Dentin tubules as a long-term sustained release carrier to accelerate bone repair by loading FTY720

The controlled release of drugs remains a huge challenge in the field of tissue engineering. Current research focuses on the construction of drug carriers by using various advanced technologies. However, the pore-like structure that exists within our human body is ignored. Herein, a dental particle loaded with FTY720 by using dentin tubules (Dent-FTY720) was successfully prepared, which could achieve long-term sustained release of drugs. Meanwhile, Dent-FTY720 significantly promoted bone defect repair because of the similarity in composition to bone including hydroxyapatite and collagen. Furthermore, the loaded drugs exhibited both anti-immune and anti-inflammatory properties. This research introduces a novel concept in drug loading, highlighting the potential of dentin tubules as a drug delivery system.

Targeted doxorubicin-loaded core-shell copper peroxide-mesoporous silica nanoparticles for combination of ferroptosis and chemotherapy of metastatic breast cancer

In the current study, a tumor microenvironment responsive (TME-responsive) copper peroxide-mesoporous silica core-shell structure with H2O2 self-supplying ability was fabricated for targeted ferroptosis/chemotherapy against metastatic breast cancer. At the first stage, copper peroxide nanodot was synthesized and subsequently coated with mesoporous organosilica shell. After (3-Aminopropyl) triethoxysilane (APTMS) functionalization of the organosilica shell, doxorubicin (DOX) was loaded in the mesoporous structure of the nanoparticles and then, heterofunctional COOH-PEG-Maleimide was decorated on the surface through EDC/NHS chemistry. Afterward, thiol-functionalized AS1411 aptamer was conjugated to the maleimide groups of the PEGylated nanoparticles. In vitro study illustrated ROS generation of the system in the treated 4 T1 cell. Cellular uptake and cytotoxicity experiments showed enhanced internalization and cytotoxicity of the targeted system comparing to non-targeted one. The in vivo study on ectopic 4 T1 tumor induced in Female BALB/c mice showed ideal therapeutic effect of Apt-PEG-Silica-DOT@DOX with approximately 90 % tumor suppression in comparison with 50 % and 25 % tumor suppression for PEG-Silica-DOT@DOX and PEG-Silica-DOT. Moreover, Apt-PEG-Silica-DOT@DOX provide favorable characteristics for biosafety issues concerning the rate of survival and loss of body weight. The prepared platform could serve as a multifunctional system with smart behavior in drug release, tumor accumulation and capable for ferroptosis/chemotherapy against breast cancer.

Stimuli-responsive nanotheranostic systems conjugated with AIEgens for advanced cancer bio-imaging and treatment

Aggregation-induced emission (AIE) is a unique phenomenon observed in various materials such as organic luminophores, carbon dots (CDs), organic-inorganic nanocomposites, fluorescent dye molecules, and nanoparticles (NPs). These AIE-active materials, or AIEgens, are ideal for balancing multifunctional phototheranostics and energy dissipation. AIE properties can manifest in organic fluorescent probes, rendering them effective for cancer treatment due to their ability to penetrate deeply and provide high therapeutic efficacy. This efficacy is attributed to their high photobleaching thresholds, ability to induce Stokes shifts, and capacity to activate fluorophores. Therefore, the development of innovative AIE-based materials for disease diagnosis and treatment, particularly for cancer, is both important and promising. Recent years have seen successful demonstrations of nanoparticles with AIE properties being used for photodynamic therapy (PDT) and multimodal imaging of tumor cells. These fluorophores have been shown to impact mitochondria and lysosomes, generate reactive oxygen species (ROS), activate the immune system, load and release drugs, and ultimately induce apoptosis in tumor cells. In this review, we examine previous studies on the manufacturing methods and effects of AIEgens on cancer cells, with a theranostic strategy of simultaneous treatment and imaging. We also investigate the factors affecting drug delivery on different cancer cells, including internal stimuli such as pH, ROS, enzymes, and external stimuli like near-infrared (NIR) light and ultrasound waves.

Nucleolin-targeted doxorubicin and ICG co-loaded theranostic lipopolymersome for photothermal-chemotherapy of melanoma in vitro and in vivo

Combination therapy using chemo-photothermal therapy (chemo-PTT) shows great efficacy toward tumor ablation in preclinical studies. Besides, lipopolymersomes as a hybrid nanocarriers, integrate advantages of liposomes and polymersomes in a single platform in order to provide tremendous biocompatibility, biodegradability, noteworthy loading efficacy for both hydrophobic and hydrophilic drugs with adjustable drug release and high stability. In this study, a multipurpose lipopolymersome was fabricated for guided chemotherapy-PTT and NIR-imaging of melanoma. A lipopolymerosomal hybrid nanovesicle consisting of equal molar ratio of 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) diblock copolymer (molar ratio 1:1) was fabricated. The nanoparticulate system was prepared through film rehydration technique for encapsulation of doxorubicin (DOX) and indocyanine green (ICG) to form DOX-ICG-LP platform. At the next stage, AS1411 DNA aptamer was conjugated to the surface of lipopolymersome (Apt-DOX-ICG-LP) for selective delivery. The sizes of DOX-ICG-LP and Apt-DOX-ICG-LP were obtained through DLS analysis (61.0 ± 6 and 74 ± 5, respectively). Near Infrared-responsive release pattern of the prepared lipopolymersome was verified in vitro. The formulated platform showed efficient photothermal conversion, and superior stability with acceptable encapsulation efficiency. Consistent with the in vitro studies, NIR-responsive lipopolymersome exhibited significantly higher cellular toxicity for Chemo-PTT versus single anti-cancer treatment. Moreover, superlative tumor shrinkage with favorable survival profile were attained in B16F10 tumor-bearing mice received Apt-DOX-ICG-LP and irradiated with 808 nm laser compared to those treated with either DOX-ICG-LP or Apt-DOX-ICG-LP without laser irradiation. The diagnostic capability of Apt-DOX-ICG-LP was addressed using in vivo NIR imaging, 6 and 24 h post-intravenous administration. The results indicated desirable feature of an established targeted theranostic capability of Apt-DOX-ICG-LP for both diagnostics and dual chemo-PTT of melanoma.

Pathway-dependent Shape Transformation of Polymeric Vesicles under UV Light and the Assembly of UV-irradiated Polymer

Shape transformation of polymer particles is generally a nonequilibrium dynamics process. Controlling the shape transformation of polymers is increasingly attractive and challenging for scientists due to their extensive use in drug delivery and cancer therapy. Herein, we investigated the UV-triggered shape transformation pathway of polymeric vesicles assembled from Polystyrene-block-poly(4-vinylpyridine) and 4-hydroxyazobenzene (PS-b-P4VP(Azo-OH)) and the direct assembly pathway of UV-irradiated PS-b-P4VP(Azo-OH) homogeneous solution. In the shape transformation process, well-assembled vesicles can be transformed into toroid, cylindrical, rod-like, and spherical micelles. In the direct assembly pathway, rod-like and spherical micelles can be obtained. Interestingly, the toroid micelles can be obtained only from the UV-triggered shape transformation pathway. Contrasting the two pathways reveals the pathway dependence of PS-b-P4VP(Azo-OH) assembly, suggesting that the final assembly morphology is determined by the initial state and dynamic process. The speed of UV-triggered shape transformation and the final morphology of assemblies can be tuned easily by adjusting the UV illuminance, time, and content of Azo-OH addition. Moreover, the light-responsive polymeric vesicles can be used as drug carriers and have the potential to release drugs precisely.

Evolution of Hybrid Hydrogels: Next-Generation Biomaterials for Drug Delivery and Tissue Engineering

Hydrogels, being hydrophilic polymer networks capable of absorbing and retaining aqueous fluids, hold significant promise in biomedical applications owing to their high water content, permeability, and structural similarity to the extracellular matrix. Recent chemical advancements have bolstered their versatility, facilitating the integration of the molecules guiding cellular activities and enabling their controlled activation under time constraints. However, conventional synthetic hydrogels suffer from inherent weaknesses such as heterogeneity and network imperfections, which adversely affect their mechanical properties, diffusion rates, and biological activity. In response to these challenges, hybrid hydrogels have emerged, aiming to enhance their strength, drug release efficiency, and therapeutic effectiveness. These hybrid hydrogels, featuring improved formulations, are tailored for controlled drug release and tissue regeneration across both soft and hard tissues. The scientific community has increasingly recognized the versatile characteristics of hybrid hydrogels, particularly in the biomedical sector. This comprehensive review delves into recent advancements in hybrid hydrogel systems, covering the diverse types, modification strategies, and the integration of nano/microstructures. The discussion includes innovative fabrication techniques such as click reactions, 3D printing, and photopatterning alongside the elucidation of the release mechanisms of bioactive molecules. By addressing challenges, the review underscores diverse biomedical applications and envisages a promising future for hybrid hydrogels across various domains in the biomedical field.

Predicting Calcein Release from Ultrasound-Targeted Liposomes: A Comparative Analysis of Random Forest and Support Vector Machine

OBJECTIVE

This study presents a comparative analysis of RF and SVM for predicting calcein release from ultrasound-triggered, targeted liposomes under varied low-frequency ultrasound (LFUS) power densities (6.2, 9, and 10 mW/cm2).

METHODS

Liposomes loaded with calcein and targeted with seven different moieties (cRGD, estrone, folate, Herceptin, hyaluronic acid, lactobionic acid, and transferrin) were synthesized using the thin-film hydration method. The liposomes were characterized using Dynamic Light Scattering and Bicinchoninic Acid assays. Extensive data collection and preprocessing were performed. RF and SVM models were trained and evaluated using mean absolute error (MAE), mean squared error (MSE), coefficient of determination (R²), and the a20 index as performance metrics.

RESULTS

RF consistently outperformed SVM, achieving R2 scores above 0.96 across all power densities, particularly excelling at higher power densities and indicating a strong correlation with the actual data.

CONCLUSION

RF outperforms SVM in drug release prediction, though both show strengths and apply based on specific prediction needs.

A specific visual-volumetric sensor for mercury ions based on smart hydrogel

On the basis of the "seeing is believing" concept and the existing theory of Hg2+ coordination chemistry, for the first time, we innovatively designed and synthesized a visual-volumetric sensor platform with fluorescein and uracil functionalized polyacrylamide hydrogel. Without the aid of any complicated instruments and power sources, the sensor-enabled quantitative μM-level Hg2+ detection Hg2+ by reading graduation on a pipette with the naked eye. The sensor undergoes volumetric response and shows a wide linear response range to Hg2+ (1.0 × 10-6-5.0 × 10-5 mol L-1) with 2.8 × 10-7 mol L-1 as the detection limit. The highly selective (easily distinguished Hg2+ from other common metal ions), rapid response (∼30 min), and acceptable repeatability (RSD < 5% in all cases) demonstrated that the developed sensor is suitable for onsite practical use for the determination of Hg2+ while being low-cost, simple, and portable. The design principles of the obtained materials and the construction techniques and methods of the sensors described in our study provide a new idea for the research and development of smart materials and a series of visual-volumetric sensors for other analytes.

Polymersome Membrane Engineering with Active Targeting or Controlled Permeability for Responsive Drug Delivery

Polymersomes have been extensively investigated for drug delivery as nanocarriers for two decades due to a series of advantages including high stability under physiological conditions, simultaneous encapsulation of hydrophilic and hydrophobic drugs inside inner cavities and membranes, respectively, and facile adjustment of membrane and surface properties, as well as controlled drug release through incorporation of stimuli-responsive components. Despite these features, polymersome nanocarriers frequently suffer from nontargeting delivery and poor membrane permeability. In recent years, polymersomes have been functionalized for more efficient drug delivery. The surface shells were explored to be modified with diverse active targeting groups to improve disease-targeting delivery. The membrane permeability of the polymersomes was adjusted by incorporation of the stimuli-responsive components for smart controlled transportation of the encapsulated drugs. Therefore, being the polymersome-biointerface, tailorable properties can be introduced by its carefully modulated engineering. This review elaborates on the role of polymersome membranes as a platform to incorporate versatile features. First, we discuss how surface functionalization facilitates the directional journey to the targeting sites toward specific diseases, cells, or intracellular organelles via active targeting. Moreover, recent advances in the past decade related to membrane permeability to control drug release are also summarized. We finally discuss future development to promote polymersomes as in vivo drug delivery nanocarriers.

Preparation of nano-sized multi-vesicular vesicles (MVVs) and its application in co-delivery of doxorubicin and curcumin

Multi-vesicular vesicles (MVVs) offer structural advantages in terms of drug encapsulation and physiological stability. In this study, we address the challenge of preparing small-sized MVVs for drug delivery. The nano-sized MVVs (∼120 nm) loaded with doxorubicin (DOX) and curcumin (CUR) (DOX/CUR@MVVs) were successfully prepared using a glass bead combined with a thin film dispersion method. Transmission electron microscopy (TEM) and dynamic light scattering (DLS) analysis confirmed the independent non-homocentric vesicle structures of DOX/CUR@MVVs with homogeneous particle sizes. The experimental results showed high encapsulation rates of DOX and CUR in DOX/CUR@MVVs, reaching 82.5 ± 0.75 % and 85.9 ± 0.69 %, respectively. Moreover, the MVVs exhibited good biosafety and sustained release properties. Notably, the bioavailability of DOX and CUR in DOX/CUR@MVVs was enhanced compared to free DOX and CUR, with increases of 4.2 and 2.1 times, respectively. And the half-life of DOX and CUR was extended by 10 times in DOX/CUR@MVVs. In vivo antitumor experiments demonstrated that nano-sized DOX/CUR@MVVs significantly improved the antitumor activity while reducing the toxic side effects of DOX. Overall, the successful preparation of nano-sized DOX/CUR@MVVs and their potent and low-toxic antitumor effects provide a critical experimental reference for the combined antitumor therapy of MVVs and liposomes.

Encapsulation of Fragrances in Micro- and Nano-Capsules, Polymeric Micelles, and Polymersomes

Fragrances are ubiquitously and extensively used in everyday life and several industrial applications, including perfumes, textiles, laundry formulations, hygiene household products, and food products. However, the intrinsic volatility of these small organic molecules leaves them particularly susceptible to fast depletion from a product or from the surface they have been applied to. Encapsulation is a very effective method to limit the loss of fragrance during their use and to sustain their release. This review gives an overview of the different materials and techniques used for the encapsulation of fragrances, scents, and aromas, as well as the methods used to characterize the resulting encapsulation systems, with a particular focus on cyclodextrins, polymer microcapsules, inorganic microcapsules, block copolymer micelles, and polymersomes for fragrance encapsulation, sustained release, and controlled release.

Poly Ethylene Glycol (PEG)-Based Hydrogels for Drug Delivery in Cancer Therapy: A Comprehensive Review

Hydrogel-based drug delivery systems (DDSs) can leverage therapeutically beneficial outcomes in cancer therapy. In this domain, polyethylene glycol (PEG) has become increasingly popular as a biomedical polymer and has found clinical use. Owing to their excellent biocompatibility, facile modifiability, and high drug encapsulation rate, PEG hydrogels have shown great promise as drug delivery platforms. Here, the progress in emerging novel designs of PEG-hydrogels as DDSs for anti-cancer therapy is reviewed and discussed, focusing on underpinning multiscale release mechanisms categorized under stimuli-responsive and non-responsive drug release. The responsive drug delivery approaches are discussed, and the underpinning release mechanisms are elucidated, covering the systems functioning based on either exogenous stimuli-response, such as photo- and magnetic-sensitive PEG hydrogels, or endogenous stimuli-response, such as enzyme-, pH-, reduction-, and temperature-sensitive PEG hydrogels. Special attention is paid to the commercial potential of PEG-based hydrogels in cancer therapy, highlighting the limitations that need to be addressed in future research for their clinical translation.

Preparation, thermal response mechanisms and biomedical applications of thermosensitive hydrogels for drug delivery

INTRODUCTION

Drug treatment is one of the main ways of coping with disease today. For the disadvantages of drug management, thermosensitive hydrogel is used as a countermeasure, which can realize the simple sustained release of drugs and the controlled release of drugs in complex physiological environments.

AREAS COVERED

This paper talks about thermosensitive hydrogels that can be used as drug carriers. The common preparation materials, material forms, thermal response mechanisms, characteristics of thermosensitive hydrogels for drug release and main disease treatment applications are reviewed.

EXPERT OPINION

When thermosensitive hydrogels are used as drug loading and delivery platforms, desired drug release patterns and release profiles can be tailored by selecting raw materials, thermal response mechanisms, and material forms. The properties of hydrogels prepared from synthetic polymers will be more stable than natural polymers. Integrating multiple thermosensitive mechanisms or different kinds of thermosensitive mechanisms on the same hydrogel is expected to realize the spatiotemporal differential delivery of multiple drugs under temperature stimulation. The industrial transformation of thermosensitive hydrogels as drug delivery platforms needs to meet some important conditions.

Using chitosan-stabilized, hyaluronic acid-modified selenium nanoparticles to deliver CD44-targeted PLK1 siRNAs for treating bladder cancer

Aims: Achieving an effective biocompatible system for siRNAs delivery to the tumor site remains a significant challenge. Materials & methods: Selenium nanoparticles (SeNPs) modified by chitosan (CS) and hyaluronic acid (HA) were fabricated for PLK1 siRNAs (siPLK1) delivery to the bladder cancer cells. The HA-CS-SeNP@siPLK1 efficacy was evaluated using in vitro and in vivo models. Results: HA-CS-SeNP@siPLK1 was selectively internalized into T24 cells through clathrin-mediated endocytosis. Treatment with HA-CS-SeNP@siPLK1 successfully silenced the PLK1 gene, inhibited cell proliferation and induced cell cycle arrest in vitro. HA-CS-SeNP@siPLK1 could also inhibit tumor growth in vivo without causing systemic toxicity. Conclusion: Our results suggest that HA-CS-SeNPs may provide a good vehicle for delivering siPLK1 to the bladder tumor site.

Synchronized delivery of dual-drugs for potentiating combination chemotherapy based on smart triple-responsive polymeric micelles

Here, we combined reversible addition-fragmentation chain transfer (RAFT) polymerization and amide coupling reaction to develop a novel drug-polymer conjugate using poly(AMA-co-IMMA)-b-poly(OEGMA) (termed as PAIPO) as nanocarriers. In order to enhance cellular uptake and obtain subsequent endo/lysosomal escape capacity, the dual-drugs-conjugated prodrug was then coupled with 2,3-dimethylmaleimide (DA) moieties and implanted with imidazolyl groups, respectively. Paclitaxel (PTX) was conjugated to PAIPO via 3,3'-dithiodipropionic acid (DPA) to construct a GSH-responsive moiety, while doxorubicin (DOX) was conjugated to PAIPO via 4-formyl benzoic acid to construct a pH-responsive moiety, which synergistically enabled a synchronized and precise drug delivery. The micelles self-assembled from DOX/PTX@PAIPO^DA showed an ideal average diameter (163.2-178.3 nm), contributing to passive targeting by the EPR effect. Moreover, a switch of the surface Zeta potential of micelles from steady negatively charged (- 9.74 ± 0.54 mV) at pH 7.4 to positively charged (+ 6.33 ± 1.25 mV) at pH 6.5, facilitated the long blood circulation and cellular endocytosis of micelles, respectively. More importantly, in vitro studies confirmed that ^DAM(DOX_n/PTX) exhibited a strong synergism against tumor cells, and under slightly acidic conditions (pH 6.5), the combination index (CI) values for ^DAM(DOX₁/PTX) on HeLa and Skov-3 cells were estimated to be 0.47 and 0.49 (previous to be 0.50 and 0.56 at pH 7.4), respectively. And in vivo results showed effective tumor accumulation potential, remarkable biosafety, and biocompatibility. Combined, such synchronized delivery approach based on multi-responsive micelles might potentiate the efficacy of combination chemotherapy in clinical cancer treatment.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

In-vitro and in-vivo evaluation of sustained-release buprenorphine using in-situ forming lipid-liquid crystal gels

AIMS

Sustained-release systems reduce the incidence of drug side effects and the need for frequent drug consumption, thus increasing patient compliance with treatment. In this study, we aimed to produce sustained-release buprenorphine (BP) using lipid-liquid crystal gels.

MAIN METHODS

The three experimental groups in this study included: group I: lipid-liquid crystal formulation 5 (F5) containing BP, group II: BP-free F5, group III: BP solution in NMP, and group IV: control (no treatment). The formulations were injected subcutaneously into the rabbits' back neck.

KEY FINDINGS

The results showed that the time required to reach the drug's maximum concentration (T_max) was longer in group I than in group III. The maximum BP concentration (C_max) and the constants of the drug removal rate and drug absorption rate (K_a) were significantly higher in group III compared to group I. The half-life (t_1/2) of the drug in blood circulation was significantly longer in group I than in group III. Histopathological analysis revealed no histological abnormalities in the skin and heart in group I (BP-containing F5); however, mild hyperemia was observed in interstitial vessels in group III (BP-containing NMP). The kidney and liver tissues showed normal structure in the control group, as well as groups I and II. However, in the group receiving BP-containing NMP, significant congestion, tissue damage, necrosis, and fibrosis were observed in the kidney and liver.

SIGNIFICANCE

The results showed that the lipid-liquid crystal system can be used to design slow-release platforms for BP, minimizing the side effects associated with the use of its conventional forms.

Targeted poly(L-glutamic acid)-based hybrid peptosomes co-loaded with doxorubicin and USPIONs as a theranostic platform for metastatic breast cancer

Peptosomes, as a vesicular polypeptide-based system and a versatile carrier for co-delivery of hydrophilic and hydrophobic materials, provide great delivery opportunities due to the intrinsic biocompatibility and biodegradability of the polypeptides backbone. In the current study, a novel poly(L-glutamic acid)-block-polylactic acid di-block copolymer (PGA-PLA) was synthesized in two steps. Firstly, γ-benzyl L-glutamate-N-carboxy anhydride (BLG-NCA) and 3,6-dimethyl-1,4-dioxane-2,5-dione were polymerized using N-hexylamine and benzyl alcohol as initiators to produce poly(γ-benzyl L-glutamate (PBLG) and polylactic acid. Then, PBLG was deprotected to produce PGA. Secondly, PGA was conjugated to the benzyl-PLGA to fabricate PGA-PLA diblock copolymer. The synthesized diblock copolymer was used for the encapsulation of doxorubicin, as hydrophilic anticancer and ultra-small superparamagnetic iron oxide nanoparticles (USPIONs) as hydrophobic contrast agent within aqueous core and bilayer of vesicular peptosome, respectively via double emulsion method. The prepared peptosomes (Pep@USPIONs-DOX) controlled the release of DOX (<15 % of the encapsulated DOX release up to 240 h of incubation at the physiological conditions) while increasing the stability and solubility of the hydrophobic USPIONs. Then, AS1411 DNA aptamer was decorated on the surface of the PGA-PLA peptosomes (Apt-Pep@USPIONs-DOX). The prepared targeted and non-targeted platforms showed spherical morphology with hydrodynamic sizes of 265 ± 52 and 229 ± 44 nm respectively. In vitro cellular cytotoxicity and cellular uptake were studied in nucleolin positive (4T1) and nucleolin negative (CHO) cell lines. Cellular uptake of the targeted formulation was greater than that of non-targeted peptosome, while cellular internalization of these peptosomes was identical in CHO cells. Moreover, targeted peptosomes showed greater toxicity than non-targeted peptosome in 4T1 cell line. The prepared theranostic targeted peptosomes demonstrated improved capability in terms of survival rate, biodistribution, tumor suppression efficiency, and MR imaging in the 4T1 tumor-bearing mice.

Preparation of targeted theranostic red blood cell membranes-based nanobubbles for treatment of colon adenocarcinoma

OBJECTIVES

Designing and fabrication of theranostic systems based on nanoscale gaseous vesicular systems, named nanobubbles (NBs), attracted enormous interest in recent years. Biomimetic vesicular platform (V-RBC-M) can improve the pharmacokinetics of the prepared platform due to augmented circulation half-life, desirable biodegradability and biocompatibility and reduced immunogenicity.

METHODS

V-RBC-M were used for the encapsulation of lipophilic camptothecin (CPT) in the bilayer of vesicles through top-down method, followed by filling the core of V-RBC-M with inert SF6 gas to fabricate NBs with ultrasonic contrast enhancement capability (SF6-NB-CPT). In the next step, targeted NBs were formed via decoration of MUC1 aptamer on the surface of NBs (Apt-SF6-NB-CPT).

RESULTS

The designed bio-NBs indicated high encapsulation efficiency and the sustained release of CPT at pH 7.4. In vitro study demonstrated higher cellular uptake and cytotoxicity of Apt-SF6-NB-CPT compared to SF6-NB-CPT in MUC1-overexpressing cells (C26). In vivo antitumor efficacy of the prepared NBs on C26 bearing BALB/c mice showed greater therapeutic efficacy and survival rate for Apt-SF6-NB-CPT. In this regard, SF6-NB-CPT showed 58% tumor growth suppression while Apt-SF6-NB-CPT system provided 95% tumor growth suppression. Furthermore, echogenic capability of SF6-NB-CPT was demonstrated through in vitro and in vivo ultrasonic imaging.

CONCLUSIONS

Our finding demonstrated that the prepared targeted NBs are a promising theranostic platform with effective therapeutic and diagnotic potentials.

Dynamic Assembly of Viscoelastic Networks by Aqueous Liquid-Liquid Phase Separation and Liquid-Solid Phase Separation (AqLL-LS PS2 )

Living cells comprise diverse subcellular structures, such as cytoskeletal networks, which can regulate essential cellular activities through dynamic assembly and synergistic interactions with biomolecular condensates. Despite extensive efforts, reproducing viscoelastic networks for modulating biomolecular condensates in synthetic systems remains challenging. Here, a new aqueous two-phase system (ATPS) is proposed, which consists of poly(N-isopropylacrylamide) (PNIPAM) and dextran (DEX), to construct viscoelastic networks capable of being assembled and dissociated dynamically to regulate the self-assembly of condensates on-demand. Viscoelastic networks are generated using liquid-liquid phase-separated DEX droplets as templates and the following liquid-to-solid transition of the PNIPAM-rich phase. The resulting networks can dissolve liquid fused in sarcoma (FUS) condensates within 5 min. This work demonstrates rich phase-separation behaviors in a single ATPS through incorporating stimuli-responsive polymers. The concept can potentially be applied to other macromolecules through other stimuli to develop materials with rich phase behaviors and hierarchical structures.

Co-delivery of paclitaxel (PTX) and docosahexaenoic acid (DHA) by targeting lipid nanoemulsions for cancer therapy

Breast cancer is one of the most common types of cancer in female patients with high morbidity and mortality. Multi-drug chemotherapy has significant advantages in the treatment of malignant tumors, especially in reducing drug toxicity, increasing drug sensitivity and reducing drug resistance. The objective of this research is to fabricate lipid nanoemulsions (LNs) for the co-delivery of PTX and docosahexaenoic acid (DHA) with folic acid (FA) decorating (PTX/DHA-FA-LNs), and investigate the anti-tumor activity of the PTX/DHA-FA-LNs against breast cancer both in vitro and in vivo. PTX/DHA-FA-LNs showed a steady release of PTX and DHA from the drug delivery system (DDS) without any burst effect. Furthermore, the PTX/DHA-FA-LNs exhibited a dose-dependent cytotoxicity and a higher rate of apoptosis as compared with the other groups in MCF-7 cells. The cellular uptake study revealed that this LNs were more readily uptaken by MCF-7 cells and M2 macrophages in vitro. Additionally, the targeted effect of PTX/DHA-FA-LNs was aided by FA receptor-mediated endocytosis, and its cytotoxicity was proportional to the cellular uptake efficiency. The anti-tumor efficiency results showed that PTX/DHA-FA-LNs significant inhibited tumor volume growth, prolonged survival time, and reduced toxicity when compared with the other groups. These results indicated that DHA increases the sensitivity of tumor cells and tumor-associated macrophages (ATM2) to PTX, and synergistic effects of folate modification in breast cancer treatment, thus PTX/DHA-FA-LNs may be a promising nanocarrier for breast cancer treatment.

Exploration of Site-Specific Drug Targeting-A Review on EPR-, Stimuli-, Chemical-, and Receptor-Based Approaches as Potential Drug Targeting Methods in Cancer Treatment

Cancer has been one of the most dominant causes of mortality globally over the last few decades. In cancer treatment, the selective targeting of tumor cells is indispensable, making it a better replacement for conventional chemotherapies by diminishing their adverse side effects. While designing a drug to be delivered selectively in the target organ, the drug development scientists should focus on various factors such as the type of cancer they are dealing with according to which drug, targeting moieties, and pharmaceutical carriers should be targeted. All published articles have been collected regarding cancer and drug-targeting approaches from well reputed databases including MEDLINE, Embase, Cochrane Library, CENTRAL and ClinicalTrials.gov, Science Direct, PubMed, Scopus, Wiley, and Springer. The articles published between January 2010 and December 2020 were considered. Due to the existence of various mechanisms, it is challenging to choose which one is appropriate for a specific case. Moreover, a combination of more than one approach is often utilized to achieve optimal drug effects. In this review, we have summarized and highlighted central mechanisms of how the targeted drug delivery system works in the specific diseased microenvironment, along with the strategies to make an approach more effective. We have also included some pictorial illustrations to have a precise idea about different types of drug targeting. The core contribution of this work includes providing a cancer drug development scientist with a broad preliminary idea to choose the appropriate approach among the various targeted drug delivery mechanisms. Also, the study will contribute to improving anticancer treatment approaches by providing a pathway for lesser side effects observed in conventional chemotherapeutic techniques.

Fabrication of Polymersomes: A Macromolecular Architecture in Nanotherapeutics

In consideration of the issues of drug delivery systems, the artificial vesicle structures composed of block copolymers called polymersomes recently gained considerable attention. The possibility of tuning the mechanical parameter and increasing the scale-up production of polymersomes led to its wide application in healthcare. Bearing in mind the disease condition, the structure and properties of the polymersomes could be tuned to serve the purpose. Furthermore, specific ligands can be incorporated on the vesicular surface to induce smart polymersomes, thus improving targeted delivery. The synthesis method and surface functionalization are the two key aspects that determine the versatility of biological applications as they account for stability, specific targeting, degradability, biocompatibility, and bioavailability. A perfectly aligned polymer vesicle can mimic the cells/organelles and function by avoiding cytotoxicity. This supramolecular structure can carry and deliver payloads of a wide range, including drugs, proteins, and genes, contributing to the construction of next-generation therapeutics. These aspects promote the potential use of such components as a framework to approach damaged tissue while maintaining healthy environments during circulation. Herein, this article concentrates specifically on the drug delivery applications of polymersomes.

Synthesis of doxorubicin-loaded peptosomes hybridized with gold nanorod for targeted drug delivery and CT imaging of metastatic breast cancer

BACKGROUND

Cancer nanomedicines based on synthetic polypeptides have attracted much attention due to their superior biocompatibility and biodegradability, stimuli responsive capability through secondary conformation change, adjustable functionalities for various cargos such as peptides, proteins, nucleic acids and small therapeutic molecules. Recently, a few nanoformulations based on polypeptides comprising NK105, NC6004, NK911, CT2103, have entered phase I-III clinical trials for advanced solid tumors therapy. In the current study, we prepared polypeptide-based vesicles called peptosome via self-assembly of amphiphilic polypeptide-based PEG-PBLG diblock copolymer.

RESULTS

In this regard, poly(γ-benzyl L-glutamate (PBLG) was synthesized via ring opening polymerization (ROP) of γ-benzyl L-glutamate-N-carboxyanhydride (BLG-NCA) using N-hexylamine as initiator. Then amine-terminated PBLG was covalently conjugated to heterofuctional maleimide PEG-carboxylic acid or methyl-PEG-carboxylic acid. The PEG-PBLG peptosomes were prepared through double emulsion method for the co-delivery of doxorubicin.HCl and gold nanorods as hydrophilic and hydrophobic agents in interior compartment and membrane of peptosomes, respectively (Pep@MUA.GNR-DOX) that DOX encapsulation efficiency and loading capacity were determined 42 ± 3.6 and 1.68 ± 3.6. Then, theranostic peptosomes were decorated with thiol-functionalized EpCAM aptamer throught thiol-maleimide reaction producing Apt-Pep@MUA.GNR-DOX for targeted delivery. The non-targeted and targeted peptosomes showed 165.5 ± 1.1 and 185 ± 4.7 nm diameters, respectively while providing sustained, controlled release of DOX. Furthermore, non-targeted and targeted peptosomes showed considerable serum stability. In vitro study on MCF-7 and 4T1 cells showed significantly higher cytotoxicity for Apt-Pep@MUA.GNR-DOX in comparison with Pep@MUA.GNR-DOX while both system did not show any difference in cytotoxicity against CHO cell line. Furthermore, Apt-Pep@MUA.GNR-DOX illustrated higher cellular uptake toward EpCAM-overexpressing 4T1 cells compared to Pep@MUA.GNR-DOX. In preclinical stage, therapeutic and diagnostic capability of the prepared Pep@MUA.GNR-DOX and Apt-Pep@MUA.GNR-DOX were investigated implementing subcutaneous 4T1 tumor model in BALB/c mice. The obtained data indicated highest therapeutic index for Apt-Pep@MUA.GNR-DOX compared to Pep@MUA.GNR-DOX and free DOX. Moreover, the prepared system showed capability of CT imaging of tumor tissue in 4T1 tumorized mice through tumor accumulation even 24 h post-administration.

CONCLUSION

In this regard, the synthesized theranostic peptosomes offer innovative hybrid multipurpose platform for fighting against breast cancer.

High efficiency of in-situ cross-linking and acid triggered drug delivery by introducing tobramycin into injectable and biodegradable hydrogels

High efficiency of in-situ cross-linking and acid triggered drug delivery is realized by introducing tobramycin into the hydrogels. Injectable and biodegradable hydrogels are prepared through two steps: First generation of reactive aldehyde groups in the sodium alginate (A-Alg) and then introduction of antibiotic tobramycin as cross-linker. Due to the formation of dynamic Schiff base bonds between the amino groups in tobramycin and aldehyde groups in A-Alg, the gelation of hydrogels can be realized immediately. Thus, tobramycin acts well as the first role cross-linker and the hydrogels containing tobramycin can be injected into the wound during the treatment. In addition, the acid from the decomposition of organic compounds by the bacteria can break the cross-linking points previously formed by tobramycin in the hydrogels. Therefore, tobramycin can be released and act as the second role model drug to kill the bacteria. Because the hydrogels network is broken, the release of tobramycin is more efficient than the traditional drug delivery from hydrogels by diffusion. Based on these unique properties, the present hydrogels containing tobramycin exhibit a good injectable and biodegradable capability. In addition, due to the existence of the reversible acid-labile linkages in the hydrogels, the hydrogels containing tobramycin are also self-healing, which additionally is favorable for the application of wound dressing. More importantly, the antibacterial hydrogels also demonstrate good biocompatibility in vitro and significantly therapeutic effects on an infected mice model in vivo. Based on the above special properties, the hydrogels cross-linked by tobramycin indicate a new approach to prepare hydrogel dressings with low-cost, non-toxicity and good anti-bacterial performance in the treatment of infectious wounds.

Release of bioactive compounds from delivery systems by stimuli-responsive approaches; triggering factors, mechanisms, and applications

Recent advances in emerging nanocarriers and stimuli-responsive (SR) delivery systems have brought about a revolution in the food and pharmaceutical industries. SR carriers are able to release the encapsulated bioactive compounds (bioactives) upon an external trigger. The potential of releasing the loaded bioactives in site-specific is of great importance for the pharmaceutical industry and medicine that can deliver the cargo in an appropriate condition. For the food industry, release of encapsulated bioactives is considerably important in processing or storage of food products and can be used in their formulation or packaging. There are various stimuli to control the favorite release of bioactives. In this review, we will shed light on the effect of different stimuli such as temperature, humidity, pH, light, enzymatic hydrolysis, redox, and also multiple stimuli on the release of encapsulated cargo and their potential applications in the food and pharmaceutical industries. An overview of cargo release mechanisms is also discussed. Furthermore, various alternatives to manipulate the controlled release of bioactives from carriers and the perspective of more progress in these SR carriers are highlighted.

Cefixime-Containing Silica Nanoseeds Coated by a Hybrid PVA-Gold Network with a Cys-Arg Dipeptide Conjugation: Enhanced Antimicrobial and Drug Release Properties

Therapeutic nano-bioconjugates (TNBCs) as an advanced class of drug delivery systems have attracted much attention due to more efficacy than the individual medications. Hence, in this study, a novel anti-infection TNBC system is designed based on highly porous silica nanoparticles, gold nanoparticles (AuNPs), and hybridized polyvinyl alcohol (PVA) for the efficient delivery of cefixime (CFM). Furthermore, a conjugation of cysteine-arginine (CR) dipeptide is made onto the surfaces for the enhancement of cell adhesion. Concisely, the AuNPs incorporated inside the PVA network play the key role in the controlled release process triggered by localized surface plasmon resonance (LSPR) heating. The drug content of the CFM-containing cargo (named as CFM@SiO₂/PVA/Au-CR) and related release profile have been precisely studied by the confirmed analytical methods. Eventually, confocal microscopy on the stained cells has revealed that the TNBC particles are capable of entering the Escherichia coli (E. coli) and Klebsiella pneumoniae (K. pneumoniae) bacterial cells better than the individual CFM. Also, optical density experiments (OD₆₀₀) have corroborated that the prepared CFM@SiO₂/PVA/Au-CR TNBC includes a high antimicrobial effect on K. pneumoniae and E. coli cells with (93.0 ± 1.5) % and (86.8 ± 1.0) % success rates, respectively, whereas the same dosage of the individual CFM has shown a lower effect on the cell growth rate. Also, estimation of minimum inhibitory/bactericidal concentrations (MIC/MBC) confirmed the enhanced antibacterial property of the CFM through the presented delivery method. Overall, this product is suggested to be clinically administrated instead of the individual CFM due to its high efficacy and containing lower dosage of the antibiotic drug.

Hybrid micelles enhance tumour therapy by remodelling biodistribution and improving intracellular drug release

PEGylated micelles have been widely used for tumour therapy. Although PEGylation can prolong the blood circulation time, there is only less than 5% of administered micelles that can be transported to tumour sites and over 95% are cleared by the reticuloendothelial system (RES). Besides, the limited intracellular drug release also restricts their efficacy. To improve the therapeutic efficacy of PEGylated micelles, a safe, simple and efficient hybrid micellar system, composed of poly(aminoethyl ethylene phosphate)-poly(L-lactic acid) (PAEEP-PLLA) and poly(ethylene glycol)-poly(L-lactic acid) (PEG-PLLA), was developed. The hybrid micelles significantly prolonged the blood circulation time by decreasing the plasma protein adsorption and reducing the clearance by the RES. The deposition of the hybrid micelles in the liver and spleen was reduced, and the tumour accumulation was greatly improved. In addition, the intracellular drug release of the hybrid micelles was obviously increased due to the easy degradation of PAEEP in the endo/lysosomes. The tumour growth inhibition efficiency of the hybrid micelles was much higher than that of the PEG-PLLA micelles (84.5% vs. 44.5%). Furthermore, the hybrid micelles exhibited low hemolysis and reduced deposition in normal organs, which revealed their excellent bio-safety. Therefore, we established a promising hybrid micelle system for efficient anti-tumour therapy.

Docetaxel encapsulation in nanoscale assembly micelles of folate-PEG-docetaxel conjugates for targeted fighting against metastatic breast cancer in vitro and in vivo

Due to the high frequency and mortality of breast cancer, developing efficient targeted drug delivery systems for frightening against this malignancy is among cancer research priorities. The aim of this study was to synthesize a targeted micellar formulation of docetaxel (DTX) using DTX, folic acid (FA) and polyethylene glycol (PEG) conjugates as building blocks. In the current study, two therapeutic polymers consisting of FA-PEG-DTX and PEG-DTX conjugates were synthesized and implemented to form folate-targeted and non-targeted micelles. Dissipative particle dynamics (DPD) method was used to simulate the behavior of the nanoparticle. The anti-cancer drug, DTX was loaded in to the micelles via solvent switching method in order to increase its solubility and stability. The cytotoxicity of the targeted and non-targeted formulations was evaluated against 4T1 and CHO cell lines. In vivo therapeutic efficiency was studied using ectopic tumor model of metastatic breast cancer, 4T1, in Female BALB/c mice. The successful synthesis of therapeutic polymers, FA-PEG-DTX and PEG-DTX were confirmed implementing ¹HNMR spectral analysis. The size of DTX-loaded non-targeted and targeted micelles were 176.3 ± 8.3 and 181 ± 10.1 nm with PDI of 0.23 and 0.17, respectively. Loading efficiencies of DTX in non-targeted and targeted micelles were obtained to be 85% and 82%, respectively. In vitro release study at pH = 7.4 and pH = 5.4 showed a controlled and continuous drug release for both formulations, that was faster at pH = 5.4 (100% drug release within 120 h) than at pH = 7.4 (80% drug release within 150 h). The targeted formulation showed a significant higher cytotoxicity against 4T1 breast cancer cells (high expression of folate receptor) within the range of 12.5 to 200 μg/mL in comparison with no-targeted one. However, there was no significant difference between the cytotoxicity of the targeted and non-targeted formulations against CHO cell line as low-expressed cell line. In accordance with in vitro investigation, in vivo studies verified the ideal anti-tumor efficacy of the targeted formulation compared to Taxotere and non-targeted formulation. Based on the obtained data, FA-targeted DTX-loaded nano-micelles significantly increased the therapeutic efficacy of DTX and therefore can be considered as a new potent platform for breast cancer chemotherapy.

Dual responsive dextran-graft-poly (N-isopropylacrylamide)/doxorubicin prodrug via Schiff base reaction

Stimulus-responsive nanoparticles stand out in studies for cancer treatment since these systems can promote a selective release of the drug in tumor tissues and cells, minimizing the effects caused by conventional chemotherapy. Dextran-graft-poly (N-isopropylacrylamide) copolymers were synthesized via Schiff base formation. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (NMR) and the analyses of dynamic light scattering (DLS) showed that the copolymers were thermal and pH dual-responsive. The chemotherapy drug doxorubicin (DOX) was conjugated to the copolymers via Schiff base formation, obtaining nanoparticles by self-assembling with size smaller than 130 nm. A higher percentage of doxorubicin was released at pH 5.0 (59.1 ± 2.1%) compared to physiological pH (34.9 ± 4.8%), confirming a pH-sensitive release profile. The in vitro cytotoxicity assay demonstrated that DOX-loaded nanoparticles can inhibit cancer cell proliferation and promote reduced cytotoxicity in non-tumor cells. The D_45kP_30k-DOX nanoparticles induced morphological changes in HCT-116 cells suggesting cell death and the cell uptake assay indicated that the nanoparticles can be internalized by endocytosis. Therefore, DOX-loaded nanoparticles exhibited potential as smart systems for cancer treatment.

Fabrication of versatile targeted lipopolymersomes for improved camptothecin efficacy against colon adenocarcinoma in vitro and in vivo

BACKGROUND

Hybrid vesicular systems (lipopolymersomes) are promising platforms for minimizing the liposomes and polymersomes disadvantages in terms of chemotherapeutic transportation. In this regard, lipopolymersome has been designed to integrate the advantage of both polymersomes and liposomes to enable better structural integrity of the bilayer after encapsulation of hydrophobic drugs while maintaining the soft nature of liposomes, superior serum stability, and high encapsulation efficiency of cargos in the bilayer segment.

RESEARCH DESIGN AND METHODS

In the present study, we reported preparation and characterization of five camptothecin (CPT)-loaded lipopolymersomal formulations composed of poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) and dipalmitoylphosphatidylcholine (DPPC) at different molar ratios using film rehydration method. Afterward, the preferred formulation was tagged with AS1411 DNA aptamer in order to evaluate the therapeutic index using nucleolin-positive colon cancer cell lines (HT29 and C26).

RESULTS

The obtained data indicated that the prepared CPT-loaded lipopolymersome at a PEG-PLA: DPPC ratio of 75:25 exhibited superior stability and high loading capacity compared to other systems. Moreover, high cytotoxicity of the aptamer-targeted lipopolymersome and increased tumor accumulation were observed in comparison with non-targeted one.

CONCLUSIONS

The designed polymer-rich lipopolymersomal platform offers bright future for the development of potent nanomedicine against cancer.

Targeted delivery system using silica nanoparticles coated with chitosan and AS1411 for combination therapy of doxorubicin and antimiR-21

Herein, a novel targeted delivery system was developed for intracellular co-delivery of doxorubicin (DOX) as a chemotherapeutic drug, antimiR-21 as an oncogenic antagomiR. In this system, DOX was loaded into mesoporous silica nanoparticles (MSNs) and chitosan was applied to cover the surface of MSNs. AS1411 aptamer as targeting nucleolin and antimiR-21 were electrostatically attached onto the surface of the chitosan-coated MSNs and formed the final nanocomplex (AACS nanocomplex). The study of drug release was based on DOX release under pH 7.4 and 5.5. Cellular toxicity and cellular uptake assessments of AACS nanocomplex were carried out in nucleolin positive (C26, MCF-7, and 4T1) and nucleolin negative (CHO) cell lines using MTT assay and flow cytometry analysis, respectively. Also, Anti-tumor efficacy of AACS nanocomplex was evaluated in C26 tumor-bearing mice. Overall, the results show that the combination therapy of DOX and antimiR-21, using AACS nanocomplex, could combat the cancer cell growth rate.

Facile preparation of multi-stimuli-responsive degradable hydrogels for protein loading and release

Functional materials that can recognize the tumor microenvironment, characterized by acidic or reducing conditions, are needed for the designing of drug delivery carriers for cancer treatment. Hydrogels are potential protein drug carriers because they contain a large amount of water and stimuli-responsive functions can easily be introduced in them. However, it is difficult to introduce multi-stimuli-responsive functions and degradability at the same time. Here, we synthesized thermo- and pH-responsive hydrogels via a coupling reaction between poly(ethylene glycol) diglycidyl ether (PEGDE) and cystamine (CA). The prepared hydrogels showed lower critical solution temperature-type thermoresponsive behavior and pH-responsive swelling changes due to the protonation of secondary and/or tertiary amino groups arising from the crosslinking agent CA. Under reducing conditions, the hydrogels were degraded via the thiol exchange reaction in the presence of dithiothreitol or glutathione. The loading and release properties of FITC-labeled model proteins from the hydrogels were investigated. The loaded amount of the protein increased with decreasing molecular weight or hydrodynamic radius, which is based on the size of the network structure of the hydrogels. Notably, loaded proteins in the hydrogels were released only under reducing conditions, which mimic the tumor microenvironment. Thus, the prepared multi-responsive degradable hydrogels are expected to be used as functional drug delivery carriers for cancer treatment.

Fabrication of deferasirox-decorated aptamer-targeted superparamagnetic iron oxide nanoparticles (SPION) as a therapeutic and magnetic resonance imaging agent in cancer therapy

In the current study, the synthesis of a theranostic platform composed of superparamagnetic iron oxide nanoparticles (SPION)-deferasirox conjugates targeted with AS1411 DNA aptamer was reported. In this regard, SPION was amine-functionalized by (3-aminopropyl)trimethoxysilane (ATPMS), and then deferasirox was covalently conjugated onto its surface. Finally, to provide guided drug delivery to cancerous tissue, AS1411 aptamer was conjugated to the complex of SPION-deferasirox. The cellular toxicity assay on CHO, C-26 and AGS cell lines verified higher cellular toxicity of targeted complex in comparison with non-targeted one. The evaluation of in vivo tumor growth inhibitory effect in C26 tumor-bearing mice illustrated that the aptamer-targeted complex significantly enhanced the therapeutic outcome in comparison with both non-targeted complex and free drug. The diagnostic capability of the prepared platform was also evaluated implementing C26-tumor-bearing mice. Obtained data confirmed higher tumor accumulation and higher tumor residence time for targeted complex through MRI imaging due to the existence of SPION as a contrast agent in the core of the prepared complex. The prepared multimodal theranostic system provides a safe and effective platform for fighting against cancer.

Smart metal organic frameworks: focus on cancer treatment

Metal–organic frameworks (MOFs), as a prominent category of hybrid porous materials, have been broadly employed as controlled systems of drug delivery due to their inherent interesting properties.

Recent advances in thermo-sensitive hydrogels for drug delivery

Thermo-sensitive hydrogels based on different polymers have been broadly used in the pharmaceutical fields. In this review, the state-of-the-art thermo-sensitive hydrogels for drug delivery are elaborated

Recent Advances in Injectable Hydrogels for Controlled and Local Drug Delivery

Injectable hydrogels have received considerable interest in the biomedical field due to their potential applications in minimally invasive local drug delivery, more precise implantation, and site-specific drug delivery into poorly reachable tissue sites and into interface tissues, where wound healing takes a long time. Injectable hydrogels, such as in situ forming and/or shear-thinning hydrogels, can be generated using chemically and/or physically crosslinked hydrogels. Yet, for controlled and local drug delivery applications, the ideal injectable hydrogel should be able to provide controlled and sustained release of drug molecules to the target site when needed and should limit nonspecific drug molecule distribution in healthy tissues. Thus, such hydrogels should sense the environmental changes that arise in disease states and be able to release the optimal amount of drug over the necessary time period to the target region. To address this, researchers have designed stimuli-responsive injectable hydrogels. Stimuli-responsive hydrogels change their shape or volume when they sense environmental stimuli, e.g., pH, temperature, light, electrical signals, or enzymatic changes, and deliver an optimal concentration of drugs to the target site without affecting healthy tissues.