Experimental and kinetic studies for phycoremediation and dye removal by Chlorella pyrenoidosa from textile wastewater

Ensuring carbon neutrality via algae-based wastewater treatment systems: Progress and future perspectives

The emergence of algal biorefineries has garnered considerable attention to researchers owing to their potential to ensure carbon neutrality via mitigation of atmospheric greenhouse gases. Algae-derived biofuels, characterized by their carbon-neutral nature, stand poised to play a pivotal role in advancing sustainable development initiatives aimed at enhancing environmental and societal well-being. In this context, algae-based wastewater treatment systems are greatly appreciated for their efficacy in nutrient removal and simultaneous bioenergy generation. These systems leverage the growth of algae species on wastewater nutrients-including carbon, nitrogen, and phosphorus-alongside carbon dioxide, thus facilitating a multifaceted approach to pollution remediation. This review seeks to delve into the realization of carbon neutrality through algae-mediated wastewater treatment approaches. Through a comprehensive analysis, this review scrutinizes the trajectory of algae-based wastewater treatment via bibliometric analysis. It subsequently examines the case studies and empirical insights pertaining to algae cultivation, treatment performance analysis, cost and life cycle analyses, and the implementation of optimization methodologies rooted in artificial intelligence and machine learning algorithms for algae-based wastewater treatment systems. By synthesizing these diverse perspectives, this study aims to offer valuable insights for the development of future engineering applications predicated on an in-depth understanding of carbon neutrality within the framework of circular economy paradigms.

Bioremediation potential of the Chlorella and Scenedesmus microalgae in explosives production effluents

This study explores microalgae-based bioremediation for treating black gunpowder production effluents, an understudied yet environmentally significant stream. Two native microalgae, Chlorella sp. MC18 (CH) and Scenedesmus sp. MJ23-R (SC), were assessed for growth kinetics and nutrient removal capabilities in culture media containing different proportions of untreated raw wastewater. Results show both species thrived in 100 % raw wastewater, displaying robust growth and substantial biomass production in parallelepiped-shaped photobioreactors. SC showed superior performance, with higher maximum specific growth rate (0.549 d-1), biomass yield (454.57 mg L-1) and biomass productivity (64.94 mg L-1 d-1) compared to CH (0.524 d-1, 380.60 mg L-1, 54.37 mg L-1 d-1, respectively). The use of 100 % raw wastewater as a culture medium eliminated the need for additional freshwater input, thus reducing the water footprint. The bioremediation process also resulted in a high removal efficiency in turbidity (>95 % CH, >76 % SC), total suspended solids (>93 % CH, >74 % SC), biochemical oxygen demand (BOD5) (>62 % CH, >93 % SC) and chemical oxygen demand (COD) (>63 % CH, >87 % SC), bringing the effluent into compliance with environmental regulations. Although nitrogen (>45 % CH, >57 % SC) and sulphate (>43 % CH, >35 % SC) removal efficiencies was high, potassium bioremediation was limited (<6 %). The proximate chemical composition of the microalgal biomass revealed different allocations to carbohydrates, lipids and proteins. The results suggest promising applications for biofuel production and aquaculture. This research highlights the potential of microalgae-based bioremediation for sustainable wastewater management in the explosives industry, contributing to the UN Sustainable Development Goals and promoting green industrial practices.

Modeling competitive biosorption for methylene blue removal on rape straw powders using response surface methodology in a ternary dye aqueous solution

The improvement of biosorption efficiency for selective dye removal in a multi-dye aqueous system has become an increasingly significant research topic. However, the competitive effects of coexisting dyes and the target dye in such systems remain uncertain due to complex interactions between adsorbent and coexisting dyes. Therefore, in this research, response surface methodology (RSM) model was effectively employed to investigate the competitive effects of allura red (AR) and malachite green (MG) on methylene blue (MB) removal in a ternary dye aqueous system using three different parts of rape straw powders. In the current design of RSM, the initial concentrations of AR and MG dyes ranging from 0 mg·L-1 to 500 mg·L-1 were considered as influencing factors, while the removal rates of MB on adsorbents at an initial concentration of 500 mg·L-1 were established as response values. The RSM models exhibited high correlation coefficients with adjusted R2 values of 0.9908 (pith core), 0.9870 (seedpods), and 0.9902 (shells), respectively, indicating a close fitted between predicted and actual values. The proposed models indicated that the perturbation effects of initial AR and MG concentrations were observed on the removal rates of MB by three types of rape straw powders in a ternary dye aqueous system, resulting in a decrease in MB removal rates, particularly at higher initial AR concentration due to stronger competitive effects compared to initial MG concentration. The structures of rape straw powders, including pith core, seedpods and shell, were analyzed using scanning eletron microscoe (SEM), energy dispersive spectroscopy (EDS), N2 physisorption isotherm, frourier transform infared spectroscopy (FTIR), Zeta potential classes and fluorescence spectrum before and after adsorption of MB in various dye aqueous systems. The characteristics of rape straw powders suggested that similar adsorption mechanisms, such as electrostatic attraction, pore diffusion, and group complex formation for MB, AR, and MG, respectively, occurred on the surfaces of adsorbents during their respective adsorption processes. This leads to significant competitive effects on the removal rates of MB in a ternary dye aqueous system, which are particularly influenced by initial AR concentrations as confirmed through fluorescence spectrum analysis.

Ecofriendly Approach on the Removal of Reactive Orange 107 from Aqueous Solutions Using Cladophora Species as a Novel Biosorbent

The efficiency of Cladophora species for the removal of Reactive Orange 107 (RO107) from the aqueous solution was evaluated through batch adsorption studies by optimising various process parameters such as pH (3-8), dye concentration (100-500 mg/l), biosorbent concentration (100-500 mg/l), temperature (25-45 °C) and contact time (12-108 h). The results revealed that the optimum conditions for RO107 decolourisation (87%) was found on 72 h of incubation with 100 mg/l dye concentration amended with 200 mg/l biosorbent at pH 6 at 25 °C. The mechanism of dye adsorption was evaluated using isotherms, kinetics and thermodynamic models. The experimental data fitted well with Langmuir isotherm and pseudo-second-order kinetic models. Thermodynamic studies revealed that the adsorption process was endothermic, spontaneous and feasible in nature. Recovery of RO107 from the Cladophora sp. was maximum when 0.1 M HNO3 was used as an eluent. UV-Visible, FT-IR and SEM analyses reveal the interaction between the biosorbent-adsorbate and confirm the process of decolourisation by Cladophora sp. In order to evaluate the nature of the untreated and treated dye solutions, toxicological studies were conducted and the results revealed that the treated dye solution was non- toxic as compared with untreated dye solution. The results of the docking study proved that there was a substantial binding energy between RO107 and the protein (Cytochrome C6) of Cladophora sp. Hence, Cladophora sp. proves to be a promising biosorbent to decolourise RO107 and its potential can be explored in the textile sectors.

Contamination of textile dyes in aquatic environment: Adverse impacts on aquatic ecosystem and human health, and its management using bioremediation

Textile dyes are the burgeoning environmental contaminants across the world. They might be directly disposed of from textile industries into the aquatic bodies, which act as the direct source for the entire ecosystem, ultimately impacting the human beings. Hence, it is essential to dissect the potential adverse outcomes of textile dye exposure on aquatic plants, aquatic fauna, terrestrial entities, and humans. Analysis of appropriate literature has revealed that textile dye effluents could affect the aquatic biota by disrupting their growth and reproduction. Various aquatic organisms are targeted by textile dye effluents. In such organisms, these chemicals affect their development, behavior, and induce oxidative stress. General populations of humans are exposed to textile dyes via the food chain and drinking contaminated water. In humans, textile dyes are biotransformed into electrophilic intermediates and aromatic amines by the enzymes of the cytochrome family. Textile dyes and their biotransformed products form the DNA and protein adducts at sub-cellular moiety. Moreover, these compounds catalyze the production of free radicals and oxidative stress, and trigger the apoptotic cascades to produce lesions in multiple organs. In addition, textile dyes modulate epigenetic factors like DNA methyltransferase and histone deacetylase to promote carcinogenesis. Several bioremediation approaches involving algae, fungi, bacteria, biomembrane filtration techniques, etc., have been tested and some other hybrid systems are currently under investigation to treat textile dye effluents. However, many such approaches are at the trial stage and require further research to develop more efficient, cost-effective, and easy-to-handle techniques.

Microalgae-Based Remediation of Real Textile Wastewater: Assessing Pollutant Removal and Biomass Valorisation

The textile industry generates highly contaminated wastewater. It severely threatens local ecosystems without proper treatment, significantly diminishing biodiversity near the discharge point. With rapid growth rates, microalgae offer an effective solution to mitigate the environmental impact of textile wastewater, and the generated biomass can be valorised. This study sets out to achieve two primary objectives: (i) to assess the removal of pollutants by Chlorella vulgaris from two distinct real textile wastewaters (without dilution) and (ii) to evaluate microalgal biomass composition for further valorisation (in a circular economy approach). Microalgae grew successfully with growth rates ranging from 0.234 ± 0.005 to 0.290 ± 0.003 d-1 and average productivities ranging from 78 ± 3 to 112.39 ± 0.07 mgDW L-1 d-1. All cultures demonstrated a significant reduction in nutrient concentrations for values below the legal limits for discharge, except for COD in effluent 2. Furthermore, the pigment concentration in the culture increased during textile effluent treatment, presenting a distinct advantage over conventional ones due to the economic value of produced biomass and pigments. This study underscores the promise of microalgae in textile wastewater treatment and provides valuable insights into their role in addressing the environmental challenges the textile industry poses.

An insight on pollutant removal mechanisms in phycoremediation of textile wastewater

Pollutants, including dyes and heavy metals from textile industrial discharge, adversely affect the surface and groundwater resources, and pose a severe risk to the living organisms in the ecosystem. Phycoremediation of wastewater is now an emerging trend, as it is colossally available, inexpensive, eco-friendly, and has many other benefits, with high removal efficiency for undesirable substances, when compared to conventional treatment methods. Algae have a good binding affinity toward nutrients and toxic compounds because of various functional groups on its cell surface by following the mechanisms such as biosorption, bioaccumulation, or alternate biodegradation pathway. Algae-based treatments generate bioenergy feedstock as sludge, mitigate CO2, synthesize high-value-added products, and release oxygenated effluent. Algae when converted into activated carbon also show good potential against contaminants, because of its higher binding efficiency and surface area. This review provides an extensive analysis of different mechanisms involved in removal of undesirable and hazardous substances from textile wastewater using algae as green technology. It could be founded that both biosorption and biodegradation mechanisms were responsible for the removal of dye, organic, and inorganic pollutants. But for the heavy metals removal, biosorption results in higher removal efficiency. Overall, phycoremediation is a convenient technique for substantial conserving of energy demand, reducing greenhouse gas emissions, and removing pollutants.

A critical review on phycoremediation of pollutants from wastewater-a novel algae-based secondary treatment with the opportunities of production of value-added products

Though the biological treatment employing bacterial strains has wide application in effluent treatment plant, it has got several limitations. Researches hence while looking for alternative biological organisms that can be used for secondary treatment came up with the idea of using microalgae. Since then, a large number of microalgal/cyanobacterial strains have been identified that can efficiently remove pollutants from wastewater. Some researchers also found out that the algal biomass not only acts as a carbon sink by taking up carbon dioxide from the atmosphere and giving oxygen but also is a renewable source of several value-added products that can be extracted from it for the commercial use. In this work, the cleaning effect of different species of microalgae/cyanobacteria on wastewater from varied sources along with the value-added products obtained from the algal biomass as observed by researchers during the past few years are reviewed. While a number of review works in the field of phycoremediation technology was reported in literature, a comprehensive study on phycoremediation of wastewater from different industries and household individually is limited. In the present review work, the efficiency of diverse microalgal/cyanobacterial strains in treatment of wide range of industrial effluents along with municipal wastewater having multi-pollutants has been critically reviewed.

Removal of organic and inorganic contaminants from the air, soil, and water by algae

Rapid increases in human populations and development has led to a significant exploitation of natural resources around the world. On the other hand, humans have come to terms with the consequences of their past mistakes and started to address current and future resource utilization challenges. Today's primary challenge is figuring out and implementing eco-friendly, inexpensive, and innovative solutions for conservation issues such as environmental pollution, carbon neutrality, and manufacturing effluent/wastewater treatment, along with xenobiotic contamination of the natural ecosystem. One of the most promising approaches to reduce the environmental contamination load is the utilization of algae for bioremediation. Owing to their significant biosorption capacity to deactivate hazardous chemicals, macro-/microalgae are among the primary microorganisms that can be utilized for phytoremediation as a safe method for curtailing environmental pollution. In recent years, the use of algae to overcome environmental problems has advanced technologically, such as through synthetic biology and high-throughput phenomics, which is increasing the likelihood of attaining sustainability. As the research progresses, there is a promise for a greener future and the preservation of healthy ecosystems by using algae. They might act as a valuable tool in creating new products.

Design and modelling of photobioreactor for the treatment of carpet and textile effluent using Diplosphaera mucosa VSPA

The current study investigated the potential of one less explored microalgae species, Diplosphaera mucosa VSPA, for treating carpet and textile effluent in a conventionally designed 10 L bubble column photobioreactor. To the best of our knowledge, this is the first study to evaluate COD (chemical oxygen demand) removal efficiency by microalgae in carpet effluent. To evaluate D. mucosa VSPA's potential, its growth and bioremediation efficacy were compared to those of a well-known strain, Chlorella pyrenoidosa. D. mucosa VSPA outperformed C. pyrenoidosa in both effluents, with the highest biomass concentration reaching 4.26 and 3.98 g/L in carpet and textile effluent, respectively. D. mucosa VSPA also remediated 94.0% of ammonium nitrogen, 71.6% of phosphate phosphorus, and 91.9% of chemical oxygen demand in carpet effluent, approximately 10% greater than that of C. pyrenoidosa. Both species also removed more than 65% of colour from both effluents, meeting the standard set by governing bodies. Microalgae growth and substrate removal patterns in the photobioreactor were simulated using photobiotreatment and the Gompertz model. Simulation results revealed that photobiotreatment was the better-fit model, concluded based on the coefficient of regression value and the second-order Akaike information criterion test. Modelling studies can assist in increasing the performance and scale-up of the photobioreactor.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03655-3.

Investigation of kinetic, isotherm and adsorption efficacy of thorium by orange peel immobilized on calcium alginate

In this research work the thorium uptake on immobilized protonated orange peel was studied in a batch system. The effects of effective parameters such as biosorbent dosage, initial metal ion concentration, and contact time on the biosorption of thorium were analyzed. The biosorption capacity of the immobilized orange peel for thorium at optimal conditions of initial pH 3.8, biosorbent dosage 8 g/L, and initial thorium concentration 170 mg/L was found to be 18.65 mg/g. According to the results of contact time, the biosorption process reached equilibrium after around 10 h of contact. Investigation of the kinetics showed that the biosorption of thorium onto immobilized orange peel follows the pseudo-second-order model. The Langmuir and Freundlich isotherms were used to model the experimental equilibrium data. The results showed better agreement by the Langmuir isotherm. The maximum absorption capacity of immobilized protonated orange peel for thorium adsorption was predicted by the Langmuir isotherm at 29.58 mg/g.

Microalgal-induced remediation of wastewaters loaded with organic and inorganic pollutants: An overview

The recent surge in industrialization has intensified the accumulation of various types of organic and inorganic pollutants due to the illegal dumping of partially and/or untreated wastewater effluents in the environment. The pollutants emitted by several industries pose serious risk to the environment, animals and human beings. Management and diminution of these hazardous organic pollutants have become an incipient research interest. Traditional physiochemical methods are energy intensive and produce secondary pollutants. So, bioremediation via microalgae has appeared to be an eco-friendly and sustainable technique to curb the adverse effects of organic and inorganic contaminants because microalgae can degrade complex organic compounds and convert them into simpler and non-toxic substances without the release of secondary pollutants. Even some of the organic pollutants can be exploited by microalgae as a source of carbon in mixotrophic cultivation. Literature survey has revealed that use of the latest modification techniques for microalgae such as immobilization (on alginate, carrageena and agar), pigment-extraction, and pretreatment (with acids) have enhaced their bioremedial potential. Moreover, microalgal components i.e., biopolymers and extracellular polymeric substances (EPS) can potentially be exploited in the biosorption of pollutants. Though bioremediation of wastewaters by microalgae is quite well-studied realm but some aspects like structural and functional responses of microalgae toward pollutant derivatives/by-products (formed during biodegradation), use of genetic engineering to improve the tolerance of microalgae against higher concentrations of polluatans, and harvesting cost reduction, and monitoring of parameters at large-scale still need more focus. This review discusses the accumulation of different types of pollutants into the environment through various sources and the mechanisms used by microalgae to degrade commonly occurring organic and inorganic pollutants.

Impact of Pollutant Load from Textile Dyeing Industry Wastewater on Biometric Growth Profile of Vigna radiata

The phytoremediation of wastewater has certain advantages, but the interactions of soil and crop properties have not been systematically studied. This study aimed to analyze how different concentrations of textile dyeing industry wastewater (25%, 50%, 75%, and 100%) affected soil qualities, growth, and yield attributes (Vigna radiata). In reaction to dyeing effluent at varying concentrations, the seed germination percentage, growth metrics such as tolerance index, phytotoxicity percentage, relative toxicity, extreme and plumule length were calculated. With increasing effluent concentrations, a gradual decrease in the germination of seed and seedling growth was observed. The maximal relative toxicity and percentage of phytotoxicity was 100%. Interaction of biometric growth profile relative seed germination, relative root growth, relative shoot growth, growth index, and seedling vigor index of V. radiata and physicochemical parameter of textile dyeing industry wastewater were also investigated by using the Pearson correlation co-efficient. Principal component analysis (PCA) is helped to obtain and recognize the factors/sources accountability of different concentrations of textile dyeing industry wastewater. The results of the PCA revealed that four components (PC1 to PC4) out of total principal components retained PC1, PC2, with values of 69.25% and 28.85%, respectively.

Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy

The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.

Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product

The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.

Microbial bioremediation strategies with wastewater treatment potentialities - A review

The demand for innovative waste treatment techniques has arisen because of the establishment and operation of rigorous waste discharge guidelines into the environment. Due to the rapid increase in the human population, wastewater treatment is a procedure of increasing significance. As a result, wastewater treatment systems are intended to sustain high activities and densities of such microorganisms which meet the different purification requirements. The waste produced by the pharmaceutical industry, if not adequately treated, has harmful repercussions for the environment as well as public health. Bioremediation is an innovative and optimistic technology that can be used to remove and reduce heavy metals from polluted water and contaminated soil. Because of cost-effectiveness and environmental compatibility, bioremediation using microorganisms has an excellent potential for future development. A diverse range of microorganisms, including algae, fungi, yeasts, and bacteria, can function as biologically active methylators, capable of modifying toxic species. Microorganisms play a crucial role in heavy metal bioremediation. Nanotechnology may minimize industry expenses by producing environmentally friendly nanomaterials to alleviate these contaminants. The use of microorganisms in nanoparticle synthesis gives green biotechnology a positive impetus to cost reduction and sustainable production as a developing nanotechnology sector.

Impact of pH on Pollutional Parameters of Textile Industry Wastewater with Use of Chlorella pyrenoidosa at Lab-Scale: A Green Approach

The current study focused on the pollution remediation of textile industry wastewater by using Chlorella pyrenoidosa in two different physical forms: free algal biomass and immobilized algal biomass. The hypothesis behind the present study was to analyze the pollution reduction efficiency of immobilized algal biomass and free algal biomass on comparative scale on the basis of the adsorption process which is directly proportional with the surface area of the adsorbate. So, in this context the immobilized form of algae could enhance the pollution reduction efficiency due to availability of more surface area. So, the textile industry wastewater was treated by both free algal biomass and immobilized algal biomass and the major wastewater contributors like nitrate, phosphate, Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) were assessed before and after the treatment process. To conclude the optimum comparative results, the pH of wastewater was maintained constant, as it can capitalize or moderate the adsorption process (initial pH of was 8.2 ± 0.1, but it was maintained to 8). The contamination remediation was found to be effective with immobilized algal biomass (46.7% of nitrate, 59.4% of phosphate, 83.1% BOD and 83.0% of COD) than free algal biomass (43.2% of nitrate, 56.7% of phosphate, 71.4% of BOD and 78.0% COD).

Utilization of Chlorella pyrenoidosa for Remediation of Common Effluent Treatment Plant Wastewater in Coupling with Co-relational Study: An Experimental Approach

Earlier investigations on biological methods of wastewater treatment have revealed that algal based wastewater treatment could be a green, cost effective and efficient approach for the removal of heavy metals. So, this study aimed to assess the potential of microalga Chlorella pyrenoidosa for remediation of heavy metals (Cr, Cu, Pb, Zn, Cd, Mn, and Ni) from varying concentration (25%, 50%, 75 and 100%) of wastewater collected from Common Effluent Treatment Plant. Heavy metals such as Cr, Cu, Pb, Zn, Cd, Mn, and Ni have been removed significantly from the wastewater, with percentage removal ranging from 73%, 60%, 75%, 66%, 87%, 83%, and 74% with 50% test solution, 57%, 59%, 70%, 56%, 72%, 66%, and 62% with 75% test solution, and 47%, 55%, 56%, 71%, 61%, 77%, and 72% with 100% test solution respectively. Studies on biochemical assay (protein, carbohydrate, and pigment) of Chlorella pyrenoidosa were also an important part of the present investigation to understand the interaction of heavy metals with algal biochemical compounds using Pearson correlation co-efficient. Biomass grown in CETP wastewater can be used for synthesis of various fruitful value-added end products like bio-diesel, pharmaceutical products, cosmetic products, bio-adsorbent etc.

Outdoor phycoremediation and biomass harvesting optimization of microalgae Botryococcus sp. cultivated in food processing wastewater using an enclosed photobioreactor

Microalgae cultivation is well known as a sustainable method for eco-friendly wastewater phycoremediation and valuable biomass production. This study investigates the feasibility and kinetic removal of organic compounds and nutrients from food processing wastewater (FPW) using Botryococcus sp. in an enclosed photobioreactor. Simultaneously, response surface methodology (RSM) via face-centered central composite design (FCCCD) was applied to optimize the effects of alum and chitosan dosage and pH sensitivity on flocculation efficiency. The maximum growth rate of Botryococcus sp. cultivated in FPW was 1.83 mg day^-1with the highest removal of chemical oxygen demand (COD), total organic carbon (TOC), and total phosphorus (TP) after 12 days of phycoremediation of 96.1%, 87.2%, and 35.4%, respectively. A second-order polynomial function fits well with the experimental results. Both coagulant dosage and pH significantly (p < 0.05) affect the flocculation efficiency of Botryococcus sp. biomass cultivated in FPW. The highest flocculation efficiency (92.4%) was obtained at a dosage of 166 mg L^-1and pH 12 for alum coagulant, while 94.9% flocculation efficiency was achieved with optimum chitosan dosage and pH of 30 mg L^-1and 5.54, respectively. In general, Botryococcus sp. shows a great removal efficiency of FPW contamination, whereas RSM provides excellent analysis for biomass harvesting optimization using a flocculation technique.

Recent advances in microalgae-based remediation of industrial and non-industrial wastewaters with simultaneous recovery of value-added products

The ability of microalgae to grow in a broad spectrum of wastewaters manifests great potentials for removing contaminants from effluents of industries and urban areas. Since the post-treatment microalgae biomass is also a significant source of high-value products, microalgae-based wastewater treatment is an economical and sustainable solution to wastewater management. Adding more value, the integration of microalgae with living/non-living materials looks more promising. Microalgae-based treatment technology has certain limitations like high operational costs, problematic harvesting, large land requirements, and hindrance in photosynthesis due to turbid wastewater. These challenges need to be essentially addressed to achieve enhanced wastewater remediation. This review has highlighted the potential applications of microalgae in contaminant removal from wastewaters, simultaneous resource recovery, efficient microalgae-based hybrid systems along with bottlenecks and prospects. This state-of-the-art article will edify the role of microalgae in wastewater remediation, biomass valorization for bio-based products, and present numerous possibilities in strengthening the circular bioeconomy.

Bioremediation of micropollutants using living and non-living algae - Current perspectives and challenges

The emergence and continual accumulation of industrial micropollutants such as dyes, heavy metals, organic matters, and pharmaceutical active compounds (PhACs) in the ecosystem pose an alarming hazard to human health and the general wellbeing of global flora and fauna. To offer eco-friendly solutions, living and non-living algae have lately been identified and broadly practiced as promising agents in the bioremediation of micropollutants. The approach is promoted by recent findings seeing better removal performance, higher efficiency, surface area, and binding affinity of algae in various remediation events compared to bacteria and fungi. To give a proper and significant insight into this technology, this paper comprehensively reviews its current applications, removal mechanisms, comparative efficacies, as well as future outlooks and recommendations. In conducting the review, the secondary data of micropollutants removal have been gathered from numerous sources, from which their removal performances are analyzed and presented in terms of strengths, weaknesses, opportunities, and threats (SWOT), to specifically examine their suitability for selected micropollutants remediation. Based on kinetic, isotherm, thermodynamic, and SWOT analysis, non-living algae are generally more suitable for dyes and heavy metals removal, meanwhile living algae are appropriate for removal of organic matters and PhACs. Moreover, parametric effects on micropollutants removal are evaluated, highlighting that pH is critical for biodegradation activity. For selective pollutants, living and non-living algae show recommendable prospects as agents for the efficient cleaning of industrial wastewaters while awaiting further supporting discoveries in encouraging technology assurance and extensive applications.

Algae bioprocess to deal with cosmetic chemical pollutants in natural ecosystems: A comprehensive review

Elevated demand and extensive exploitation of cosmetics in day-to-day life have hiked up its industrial productions worldwide. Organic and inorganic chemicals like parabens, phthalates, sulfates, and so forth are being applied as constituents towards the formulations, which tend to be the mainspring ecological complication due to their enduring nature and accumulation properties in various sections of the ecosystem. These cosmetic chemicals get accrued into the terrestrial and aquatic systems on account of various anthropogenic activities involving agricultural runoff, industrial discharge, and domestic effluents. Recently, the use of microbes for remediating persistent cosmetic chemicals has gained immense interest. Among different forms of the microbial community being applied as an environmental beneficiary, algae play a vital role in both terrestrial and aquatic ecosystems by their biologically beneficial metabolites and molecules, resulting in the biobenign and efficacious consequences. The use of various bacterial, fungal, and higher plant species has been studied intensely for their bioremediation elements. The bioremediating property of the algal cells through biosorption, bioassimilation, biotransformation, and biodegradation has made it favorable for the removal of persistent and toxic pollutants from the environment. However, the research investigation concerned with the bioremediation potential of the algal kingdom is limited. This review summarizes and provides updated and comprehensive insights into the potential remediation capabilities of algal species against ecologically hazardous pollutants concerning cosmetic chemicals.

Resource recovery through bioremediation of wastewaters and waste carbon by microalgae: a circular bioeconomy approach

Microalgal biomass-based biofuels are a promising alternative to fossil fuels. Microalgal biofuels' major obstacles are the water and carbon sources for their cultivation and biomass harvest from the liquid medium. To date, an economically viable process is not available for algal based biofuels. The circular bioeconomy is an attractive concept for reuse, reduce, and recycle resources. The recovery of nutrients from waste and effluents by microalgae could significantly impact the escalating demands of energy and nutraceutical source to the growing population. Wastewaters from different sources are enriched with nutrients and carbon, and these resources can be recovered and utilized for the circular bioeconomy approach. However, the utilization of wastewaters and waste seems to be an essential strategy for mass cultivation of microalgae to minimizing freshwater consumption, carbon, nutrients cost, nitrogen, phosphorus removal, and other pollutants loads from wastewater and generating sustainable biomass for value addition for either biofuels or other chemicals. Hence, the amalgamation of wastewater treatment with the mass cultivation of microalgae improved the conventional treatment process and environmental impacts. This review provides complete information on the latest progress and developments of microalgae as potential biocatalyst for the remediation of wastewaters and waste carbon to recover resources through biomass with metabolites for various industrial applications and large-scale cultivation in wastewaters, and future perspectives are discussed.

Integrating bioremediation of textile wastewater with biodiesel production using microalgae (Chlorella vulgaris)

Microalgae-led wastewater treatment is a promising biorefinery approach to promote environmental and economical sustainability. In this study, Chlorella vulgaris (C. vulgaris) was employed for the bioremediation of textile wastewater (TWW) and biodiesel production. C. vulgaris is cultivated in undiluted and diluted TWW (50%). Cultivation in freshwater containing BG11 medium was set as a control. Results show the highest growth (1.62 ± 0.12 OD₆₈₀) in diluted TWW followed by BG11 medium (1.56 ± 0.15 OD₆₈₀) and undiluted TWW (0.89 ± 0.11 OD₆₈₀). The highest methylene blue decolorization of 99.7% was observed in diluted TWW as compared to 98.5% in undiluted TWW. Morever, COD removal efficiency was also higher (99.7 ± 4.2%) in diluted TWW than BG11 medium (94.4 ± 3.5%) and undiluted TWW (76.3 ± 2.8%). For all treatment, more than 80% nitrogen and phosphorous removal were achieved. Otther than this, fatty acids methyl ester (FAME) yield in diluted TWW was higher (11.07 mg g^-1) than the undiluted TWW (9.12 mg L^-1). Major FAME were palmitic acid (C16:0) and linolenoic acid (C18:3) which are suitable for biodiesel production. All these results suggest that C. vulgaris can be cultivated in both diluted and undiluted TWW for biodiesel production. However, cultivation in undiluted TWW is more favorable as it displaces the need for freshwater addition in the growth medium.

Production of algal biomass for its biochemical profile using slaughterhouse wastewater for treatment under axenic conditions

Slaughterhouse produce large amount of wastewater, containing high pollutant load in terms of protein, fats and meat pieces, might lead to source of non-point contamination. Various concentrations (25%, 50%, 75%, and 100%) of slaughterhouse wastewater were used to increase the algal biomass production, pollutants removal and biochemical profile analysis under controlled conditions of C. pyrenoidosa. Results showed that the maximum biomass yield 430 mg L-1 was achieved at 50% concentration of wastewater to other concentration of wastewater. Direct relation was observed in between pollution load and nutrient load of SHWW with biochemical profile of C. pyrenoidosa. The COD/BOD ratio (1.9) was found to be significant on the scale of degradability by algal biomass. Sufficient nutrient removal efficiencies (23-42%, 18-48%) and pollutant load efficiencies (17-31%, 7-29%) were observed. Findings showed that slaughterhouse wastewater is rich in nutrients, which can be utilized for algal biomass production and wastewater remediation for future endeavors.

Modified multi-walled carbon nanotubes assisted foam fractionation for effective removal of acid orange 7 from the dyestuff wastewater

In this study, multi-walled carbon nanotubes (MWCNTs) had been used to strengthen the removal of acid orange 7 (AO7) from the dyestuff wastewater by using foam fractionation. First, the surface modification of MWCNTs was performed by introducing hypochlorite groups (-OCl). The modified MWCNTs were characterized by using SEM, XRD, FTIR and Raman spectroscopy. Subsequently, the potential of modified MWCNTs as a novel collector for AO7 adsorption was examined. The adsorption conditions of modified MWCNTs towards AO7 were optimized by using response surface methodology (RSM) with a central composite design (CCD). The adsorption capacity of modified MWCNTs towards AO7 could reach 47.72 ± 0.79 mg·g^-1 under the optimum conditions. The kinetics and the equilibrium adsorption data were analyzed by using different kinetic and isotherm models. According to the regression results, adsorption kinetics data were well described by pseudo-second order model, whereas adsorption isotherm data were best represented by Langmuir isotherm model. Finally, foam fractionation was performed with a batch mode. Under the suitable conditions of loading liquid volume 300 mL, modified MWCNTs dosage 180 mg, cetyltrimethylammonium bromide (CTAB) concentration 50 mg·L^-1, AO7 concentration 30 mg·L^-1, pore diameter of gas distributor 0.125 mm and air flow rate 100 mL·min^-1, the removal percentage and enrichment ratio of AO7 were 91.23% and 6.17, respectively. The decolourization ratio of solution after foam fractionation was found to be 98.66%.

Influence of nutrient supplementation and starvation conditions on the biomass and lipid productivities of Micractinium reisseri grown in wastewater for biodiesel production

Generation of biodiesel from microalgae grown in wastewater can offer a cost-effective approach, whilst wastewaters usually do not contain the optimum concentrations of the essential nutrients and carbon sources that result in lowering the productivities of biomass and lipid. This study aimed to overcome this limitation by manipulating wastewater with various concentrations of nutrients (NO₃^-, PO₄^3-, Cl^- and SO₄^2-) and three carbon sources either individually or in combination to cultivate Micractinium reisseri for biodiesel production. Initially, various dilutions of wastewater were tested and a concentration up to 75% of wastewater showed the highest biomass productivity (0.076 g L^-1 d^-1) and lipid productivity (0.014 g L^-1 d^-1). The optimum manipulating conditions for maximum lipid production and the highest productivity required 50% decrease in phosphorous from the concentration of the control medium and supplementation with 1.0 g L^-1 of glucose. Under this condition, biomass and lipid productivities increased by 1.7 and 4-folds, respectively, compared to those observed in the control. Furthermore, phosphorous starvation condition in the presence of glucose significantly improved fatty acid profile in the biomass and biodiesel quality related parameters.

Eco-Friendly Photocatalyst Derived from Egg Shell Waste for Dye Degradation

This study is focused on removal of dyes in water bodies using calcined egg shell powder obtained from waste egg shells as a new material for photocatalytic dye removal. The photocatalytic activity of calcined egg shell powder (CESP) was compared with the raw egg shell powder (RESP) under light and dark conditions. The results reveal that CESP has significantly a higher dye degradation capability of 80% compared to the RESP which is 20% under the same condition. Furthermore, under light conditions, CESP has shown nearly 50% increase in dye degradation compared to the same material in the dark. The kinetics of dye degradation follows pseudo-second-order kinetics suggesting the chemisorption process and the Freundlich adsorption isotherm is best fitted (R2 value is 0.96 for the linear fit) with the dye adsorption process. The application of CESP in industry is studied with a textile acid dye Lanasyn Rez F5B, and the results reveal it follows pseudo-second-order kinetics in dye removal.

Aluminum formate (AF): Synthesis, characterization and application in dye wastewater treatment

Aluminum formate (AF), a degradable and non-corrosive coagulant, was synthesized from aluminum hydroxide and formic acid. Polyamidine (PA), as a coagulation aid, was combined with AF for dye wastewater treatment. AF was characterized by XPS, FT-IR, viscosity, zeta potential, mass spectrum and XRD, and the flocculation properties of the dual-coagulation system were characterized by FT-IR and SEM. The results showed that COOH, Al₂O₃-Al and O₂-Al bonds were formed in the AF synthesis process, and AF had a higher molecular weight and higher charge neutralization ability than PAC. The hydrolysates of AF were determined to contain Al₁₃ Al₁₁ and Al₂, and the components of AF were confirmed to comprise a mixture including aluminum formate (C₃H₃AlO₆) and its hydrate. When the color removal efficiency reached 100% in jar tests, the optimized dosage of AF/PA was 18.91/0.71mg/L, while the optimized dosage of PAC/PA was 21.19/0.91mg/L. According to the variance analysis, the interaction between AF/PA and PAC/PA were insignificant in macroscopic view. FT-IR spectrum indicated AF captured pollutant by means of CCO bond, PAC captured pollutant by δ CH, CC and δ CH. Overall, although the coagulation mechanism of AF was different from that of PAC, AF/PA showed better coagulation efficiency than PAC/PA in dye wastewater treatment.

Optimization of nutrient stress using C. pyrenoidosa for lipid and biodiesel production in integration with remediation in dairy industry wastewater using response surface methodology

The present study illustrates optimization and synergetic potential of alga Chlorella pyrenoidosa for lipid production and remediation of Dairy industry wastewater (DIWW) through response surface methodology (RSM). Maximum lipid productivity of 34.41% was obtained under 50% DIWW supplemented with 0 mg L^-1 nitrate (NO₃^-), and 50 mg L^-1 phosphate (PO₄^-3). While maximum biomass productivity (1.54 g L^-1) was obtained with 50% DIWW supplemented with 100 mg L^-1 NO₃^-, and 50 mg L^-1, PO₄^-3. Maximum removal of COD (43.47%), NO₃^- (99.80%) and PO₄^-3 (98.24%) was achieved with 8th run (75% DIWW, 150 mg L^-1 NO₃^-, 75 mg L^-1 PO₄^-3), 15th run (50% DIWW, 0 mg L^-1 NO₃^-, 50 mg L^-1, PO₄^- 3) followed by 1st run (25% DIWW, 50 mg L^-1 NO₃^-, and 25 mg L^-1, PO₄^-3), respectively. Lipid (bio-oil) obtained from 15th run of experiment was converted in biodiesel through base catalyze transesterification process. Fatty acid methyl ester (FAME) analysis of biodiesel confirmed the presence of major fatty acids in C. pyrenoidosa grown in DIWW were C11:0, C14:0, C16:0, C16:1, C18:1 and C18:2. Results of study clearly demonstrate enhanced growth and lipid accumulation by C. pyrenoidosa in surplus PO₄^-3 and limitation of NO₃^- sources with DIWW and its suitability as potential alternative for commercial utilization.

Biosorption of malachite green onto Haematococcus pluvialis observed through synchrotron Fourier-transform infrared microspectroscopy

Microalgae have emerged as promising biosorbents for the treatment of malachite green (MG) in wastewater. However, the underlying mechanism for the biosorption of MG onto microalgae is still unclear and needs further intensive study. In this work, synchrotron Fourier-transform infrared (s-FTIR) microspectroscopy in combination with biochemical assay is employed to evaluate MG removal efficiency (95·2%, 75·6% and 66·5%) by three stages of Haematococcus pluvialis. Meanwhile, the various vital changes of algal cells including lipids, proteins, polysaccharides and carotenoids is distinguished and quantified in situ. This study illustrates that s-FTIR microspectroscopy is an effective and powerful tool to scrutinize the mechanism for the interactions between the MG dye and microalgal cells, and it even provides an effective and noninvasive new approach to screen potentially proper biosorbents for the removal of dyes from wastewater.

SIGNIFICANCE AND IMPACT OF THE STUDY

Microalgae have potential application for their ability to absorb dyes from industrial wastewater. In this study, we initiated the application of synchrotron Fourier-transform infrared (s-FTIR) microspectroscopy to investigate malachite green dye removal efficiency by three stages of Haematococcus pluvialis, demonstrating that s-FTIR is a very powerful tool in exploring the mechanism of the biosorption of dyes onto microalgae.

Recent advancements in bioremediation of dye: Current status and challenges

The rampant industrialization and unchecked growth of modern textile production facilities coupled with the lack of proper treatment facilities have proliferated the discharge of effluents enriched with toxic, baleful, and carcinogenic pollutants including dyes, heavy metals, volatile organic compounds, odorants, and other hazardous materials. Therefore, the development of cost-effective and efficient control measures against such pollution is imperative to safeguard ecosystems and natural resources. In this regard, recent advances in biotechnology and microbiology have propelled bioremediation as a prospective alternative to traditional treatment methods. This review was organized to address bioremediation as a practical option for the treatment of dyes by evaluating its performance and typical attributes. It further highlights the current hurdles and future prospects for the abatement of dyes via biotechnology-based remediation techniques.

Optimization of simultaneous ultrasound assisted toxic dyes adsorption conditions from single and multi-components using central composite design: Application of derivative spectrophotometry and evaluation of the kinetics and isotherms

Present study is devoted on the efficient application of Sn (O, S)-NPs -AC for simultaneous sonicated accelerated adsorption of some dyes from single and multi-components systems. Sn (O, S) nanoparticles characterization by FESEM, EDX, EDX mapping and XRD revel its nano size structure with high purity of good crystallinity. Present adsorbent due to its nano spherical shape particles with approximate diameter of 40-60nm seems to be highly effective in this regard. The effects of five variables viz. pH (3.5-9.5), 0.010-0.028g of adsorbent and 0.5-6.5min mixing by sonication is good and practical conditions for well and expected adsorption of MB and CV over concentration range of 3-15mgL^-1. Combination of response surface methodology (RSM) based on central composite design (CCD) and subsequent of analysis of variance (ANOVA) and t-test statistics were used to test the significance of the independent variables and their interactions. Regression analysis reveal that experimental data with high repeatability and efficiency well represented by second-order polynomial model with coefficient of determination value of 0.9988 and 0.9976 for MB and CV, respectively following conditions like pH 8.0, 0.016g adsorbent, 15mgL^-1 of both dyes 4min sonication time is proportional with achievement of experimental removal percentage of 99.80% of MB and 99.87% of CV in batch experiment. Evaluation and estimation of adsorption data with Langmuir and Freundlich isotherm well justify the results based on their correlation coefficient and error analysis confirm that Langmuir model is good model with adsorption capacity of 109.17 and 115.34mgg^-1 in single system and 95.69 and 102.99mgg^-1 in binary system for MB and CV, respectively. MB and CV kinetic and rate of adsorption well fitted by pseudo-second order equation both in single and binary systems and experimental results denote more and favorable adsorption of CV than respective value in single system. The pseudo-second-order rate constant k₂ in binary system larger than single system.

Comparative study on ultrasonic assisted adsorption of dyes from single system onto Fe3O4 magnetite nanoparticles loaded on activated carbon: Experimental design methodology

The present study the ultrasound assisted adsorption of dyes in single system onto Fe₃O₄ magnetite nanoparticles loaded on activated carbon (Fe₃O₄-MNPs-AC) was described following characterization and identification of this adsorbent by conventional techniques likes field emission scanning electron microscopy, transmission electron microscopy, particle-size distribution, X-ray diffraction and Fourier transform infrared spectroscopy. A central composite design in conjunction with a response surface methodology according to f-test and t-test for recognition and judgment about significant term led to construction of quadratic model which represent relation among responses and effective terms. This model has unique ability to predict adsorption data behavior over a large space around central and optimum point. Accordingly Optimum conditions for well and quantitative removal of present dyes was obtained best operation and conditions: initial SY, MB and EB dyes concentration of 15, 15 and 25mgL^-1, 4.0, 6.0 and 5.0 of pH, 360, 360 and 240s sonication time and 0.04, 0.03 and 0.032g of Fe₃O₄-MNPs-AC. Replication of similar experiment (N=5) guide that average removal percentage of SY, MB and EB were found to be 96.63±2.86%, 98.12±1.67% and 99.65±1.21% respectively. Good agreement and closeness of Predicted and experimental result and high adsorption capacity of dyes in short time strongly confirm high suitability of present method for waste water treatment, while easy separation of present nanoparticle and its good regeneration all support good applicability of Fe₃O₄-MNPs-AC for waste water treatment. The kinetic study can be represented by combination of pseudo second-order and intraparticle diffusion. The obtained maximum adsorption capacities correspond to Langmuir as best model for representation of experimental data correspond to dyes adsorption onto Fe₃O₄-MNPs-AC were 76.37, 78.76 and 102.00mgg^-1 for SY, MB and EB, respectively. In addition, the performance comparison of ultrasound-assisted, magnetic stirrer assisted and vortex assisted adsorption methods demonstrates that ultrasound is an effective and good choice for facilitation of adsorption process via. Compromise of simple and facile diffusion.

Degradation of disperse blue 2BLN by oleaginous C. sorokiniana XJK

In this study, an oil-producing freshwater microalgae Chlorella sorokiniana XJK was identified and used for the degradation of disperse blue 2BLN.