Active and passive biosorption of Pb(II)using live and dead biomass of marine bacterium Bacillus xiamenensis PbRPSD202: Kinetics and isotherm studies

Lead (Pb2+) biosorption and bioaccumulation efficiency of Enterobacter chuandaensis DGI-2: Isotherm, kinetics and mechanistic study for bioremediation

Heavy metal (HM) contamination, particularly lead (Pb²⁺), threatens environmental and agricultural sustainability, necessitating effective remediation strategies. This study evaluates the Pb²⁺ sequestration potential of Enterobacter chuandaensis DGI-2, an HM-tolerant rhizobacterium isolated from a Pb-contaminated rhizosphere. DGI-2 exhibited high Pb²⁺ removal efficiency, achieving 94.73 % removal at 100 µg/mL and 69.09 % at 750 µg/mL over 96 h, primarily through cell surface and exopolysaccharide (EPS) adsorption. Biosorption studies demonstrated higher Pb²⁺ uptake in living biomass (102.95 mg/g, 68.63 %) than in dead biomass (98.61 mg/g, 65.74 %) under controlled conditions (0.5 g/L biomass, pH-6.5, 720 min). Mechanistic analyses revealed that Pb²⁺ adsorption primarily involved interactions with -OH, -COOH, and -PO₄³ ⁻ functional groups, facilitated by multilayer sorption, complexation, and ion exchange. Moreover, a 210.66 % increase in phosphatase activity promoted Pb²⁺ precipitation, forming stable Pb-phosphate minerals (e.g., Pb₅(PO₄)₃Cl, Pb₁₀(PO₄)₆(OH)₂), as confirmed by X-ray diffraction (XRD), significantly contributing to Pb sequestration. Regeneration studies demonstrated the biomass' reusability over four cycles. Soil microcosm experiments showed an 11.7-13.1 % reduction in bioavailable Pb, with greater stabilization in non-sterile soils, suggesting synergistic effects with native microbiota. Additionally, DGI-2 exhibited plant growth-promoting (PGP) traits, reducing phytotoxicity, enhancing soil health and phytostabilization potential, positioning it as a sustainable biosorbent for Pb²⁺ remediation.

Mechanistic and kinetic understanding of Pb-phosphate biomineralization from humic acid-bound Pb under active growth of phosphate solubilizing Enterobacter aerogenes W6

Humic acid-bound Pb (HA-Pb), as one of the representative solid-associated Pb species, plays important roles in Pb mobility and toxicity in aqueous environments. Stable Pb-phosphate minerals formation mediated by phosphate solubilizing bacteria (PSB) is a promising approach to immobilizing Pb in contaminated waters. However, the underlying processes and kinetics of Pb-phosphate biomineralization from labile HA-Pb species remain unclear. Here, experiments were conducted using dialysis bags to separate PSB Enterobacter Aerogenes W6 cells from HA-Pb and FePO4 solids, and the time-dependent evolutions of solution conditions, PSB metabolites, Pb species, and Pb-phosphate minerals were systematically analyzed. Acid-soluble Pb species (∼25%) in HA-Pb, mainly complexing with phenolic hydroxyl groups, served as the source for Pb-phosphate mineralization. Extracellular secreted small organic acids contributed to Pb solubilization from HA-Pb, while polysaccharide macromolecules played critical roles in promoting Pb-phosphate nucleation on PSB cell surfaces. By coupling time-dependent bacterial growth, an integrated kinetic model was developed and performed well in describing the underlying processes of Pb-phosphate biomineralization, including Pb solubilization from HA-Pb (RMSE<1%), Pb adsorption onto PSB cells (RMSE<20%), and Pb-phosphate mineral precipitation (RMSE<5%). The findings provide insights into the Pb-phosphate biomineralization of solid-associated Pb and could help to predict the fate of Pb in natural and engineering systems.

Biosorption of cypermethrin from aqueous solutions by Pediococcus acidilactici: kinetics, isotherms, and mechanisms

BACKGROUND

Pediococcus acidilactici is an effective adsorbent for removing of pyrethroid insecticides. This study investigated the biosorption characteristics and mechanisms of P. acidilactici D15 using adsorption measurement, scanning electron microscopy, and Fourier-transform infrared spectroscopy. Isotherm and kinetic models were used to analyze the biosorption process.

RESULTS

The Langmuir isotherm model best described the cypermethrin biosorption process, with the maximum adsorption capacity of P. acidilactici D15 being 21.404 mg/g. The biosorption appeared to involve monolayer coverage with uniform forces. The pseudo-second-order model also fits well. The rate-controlling steps involved intraparticle diffusion, film diffusion and chemosorption. The main cellular components involved in cypermethrin biosorption were exopolysaccharides, spheroplast, and cell wall, especially peptidoglycan. The functional groups (-OH, -NH, -CH3, -CH2, -CH, -CONH-, -CO, and -C-O-C-) from proteins, polysaccharides, and peptidoglycan on the cell surface likely played a role in binding cypermethrin. Additionally, P. acidilactici D15 effectively reduced cypermethrin in pickle wastewater.

CONCLUSION

These findings suggest that P. acidilactici D15 could be a potential agent for reducing pesticide residues, laying the groundwork for treating pickle wastewater containing such pesticide residues. © 2024 Society of Chemical Industry.

Analysis of heavy metal tolerance and genomics in an indigenous Kurthia strain from Kulik River reveals multi-metal resistance and dominance of selection pressure on codon usage patterns

Heavy metal(loid) contamination poses significant risks to biological entities and the ecosystem. Many metal(loid)-resistant bacteria have been isolated from different environmental sites, but still no work has described multi-metal resistant Kurthia sp. In this study, an indigenous Kurthia strain isolated from the surface water of River Kulik was studied to determine its level of tolerance to various metal(loid)s. This study aimed to isolate, characterize and determine the growth kinetics and efficiency of Kurthia gibsonii strain M6 to remove and bioaccumulate As(V), Ni and Pb in vitro. This study also aimed to sequence the whole genome of the bacterium, identify metal resistance genes and analyze the codon usage patterns and factors that affect the codon usage bias of these genes. The bacterium showed elevated resistance to As(V), Pb, Ni and Zn. Under metal(loid) stressed conditions, live cells of Kurthia strain M6 bioaccumulated 212.74, 91.51 and 40.38 mg g-1 of As(V), Pb and Ni, respectively. The removal efficiency was 97%, 69.15% and 25.88% for Pb, Ni and As(V), respectively. Genome analysis revealed the existence of different genes conferring heavy metal resistance. A comprehensive analysis of codon usage patterns for metal resistance genes depicted the predominance of selection pressure as a prime force influencing codon usage patterns. This is the first time a multi-metal resistant K. gibsonii strain has been systematically studied regarding its heavy metal resistance biology. These findings will provide insights into the metal resistance mechanisms of the genus Kurthia and assist in devising new strategies for the bioremediation of metal-polluted environments.

Comprehensive approaches to heavy metal bioremediation: Integrating microbial insights and genetic innovations

The increasing contamination of ecosystems with heavy metals (HMs) due to industrial activities raises significant jeopardies to environmental health and human well-being. Addressing this issue, recent advances in the field of bioremediation have highlighted the potential of plant-associated microbiomes and genetically engineered organisms (GEOs) to mitigate HMs pollution. This review explores recent advancements in bioremediation strategies for HMs detoxification, with particular attention to omics technologies such as metagenomics, metabolomics, and metaproteomics in deepening the understanding of microbial interactions and their potential for neutralizing HMs. Additionally, Emerging strategies and technologies in GEOs and microorganism-aided nanotechnology have proven to be effective bioremediation tools, particularly for alleviating HM contamination. Despite the promising strategies developed in laboratory settings, several challenges impede their practical application, including ecological risks, regulatory limitations, and public concerns regarding the practice of genetically modified organisms. A comprehensive approach that involves interdisciplinary research is essential to enhance the efficacy and safety of bioremediation technologies. This approach should be coupled with robust regulatory frameworks and active public engagement to ensure environmental integrity and societal acceptance. This review underscores the importance of developing sustainable bioremediation strategies that align with ecological conservation goals and public health priorities.

Agro-industrial wastes and their application perspectives in metal decontamination using biocomposites and bacterial biomass: a review

Contamination of water bodies is a significant global issue that results from the deliberate release of pollutants into the environment, especially from mining and metal processing industries. The main pollutants generated by these industries are metallic wastes, particularly metals, which can cause adverse effects on the environment and human health. Therefore, it is crucial to develop effective and sustainable approaches to prevent their discharge into the environment. Biofiltration is a technique used to remediate contaminated fluids using biological processes. Microorganisms and agro-industrial wastes have been used successfully as biosorbents. Hence, this review emphasizes the innovative use of agro-industrial waste reinforced with microbial biomass as bioadsorbents, highlighting their dual capacity for metal removal through various bioremediation mechanisms. The mechanisms at play in these biocomposite materials, which offer enhanced sustainability, are also analyzed. This study contributes to the advancement of knowledge by suggesting new strategies for integrating reinforced materials in biosorption processes, thus providing a novel perspective on the potential of lignocellulosic-based systems to improve decontamination efforts. On the other hand, it shows some studies where the optimization and scaling-up of biosorption processes are reported. Additionally, the implementation of multisystem approaches, leveraging multiple bioremediation techniques simultaneously, can further enhance the efficiency and sustainability of metal removal in contaminated environments.

Effective Removal of Selenium from Aqueous Solution using Iron-modified Dolochar: A Comprehensive Study and Machine Learning Predictive Analysis

Selenium (Se) is an essential micronutrient for human beings, but excess concentration can lead to many health issues and degrade the ecosystem. This study focuses on the removal of selenium from an aqueous solution using iron-doped dolochar. SEM, EDX, BET, XRD, FTIR, and Pzpc were conducted to determine the surface characteristics of iron-doped dolochar (FeD). The characterization of the adsorbent gave an insight into surface morphology, surface area (100 m2/g), average pore diameter (3.9 nm), and surface composition, which contributed to the Se adsorption. The pHzpc of the iron-doped adsorbent surface was found to be 7.02, which provided a broad range for effective Se adsorption. To detect the optimum parameters, the parametric influence on removal efficiency was conducted by varying pH, dosages, contact time, and initial concentration. The experiment achieved maximum selenium removal, ∼98 %, at low concentration, 10 g/L dosage, and low pH (2) within 90 min at room temperature. It fits the Langmuir better than the Freundlich isotherm (R2 = 0.99), indicating monolayer adsorption. It fitted well with pseudo-second-order kinetics. The experiment is a spontaneous, endothermic (ΔH0 = 9.22 kJ/mol) and high randomness (ΔS0 = 45.37 kJ/mol) suggested by thermodynamic study. The adsorption was influenced by competing ions as follows: phosphate > sulfate > nitrate > manganese > aluminum > zinc > iron. A regression learner tool was used to compare different models using the experimental data that showed the best fit with the Gaussian Process Regression with RMSE = 0.246, MSE = 0.061, and R2 = 0.99. Thus, it can be concluded that FeD is preferred as a better adsorbent for selenium removal from aqueous solutions and could produce 35.5% ROI, 21.5% IRR, and 24.59% BEP on FeD production.

Mitigating effect of Bifidobacterium longum CCFM1077 on nonylphenol toxicity: An integrative in vitro and in vivo analysis

Nonylphenol (NP), an endocrine-disrupting compound (EDC) with accumulative properties, poses significant risks to human health and the environment. The pivotal role of probiotics in mitigating EDC toxicity has garnered increasing attention. In this study, we assessed the protective effects of Bifidobacterium longum CCFM1077, a probiotic with outstanding in vitro NP-binding ability, against NP-induced toxicity in rats. This analysis revealed that B. longum CCFM1077 effectively promoted the NP excretion and enhanced intestinal barrier integrity. Interestingly, B. longum CCFM1077, by modulating the structure and the function of gut microbiota, increased the abundance of Turicibacter, significantly elevated the level of butyric acid, and upregulated antioxidant-related metabolic pathways, thereby alleviating brain inflammation and ultimately improving behavioral disorders. This study elucidated a strategy to alleviate NP toxicity and lays a theoretical foundation for the development of novel intestinal protection strategies. It supports environmental sustainability by offering a strategy to combat NP bioaccumulation, aligning with global initiatives to minimize the environmental impact of industrial pollutants.

Identification of cadmium-tolerant plant growth-promoting rhizobacteria and characterization of its Cd-biosorption and strengthening effect on phytoremediation: Development of a new amphibious-biocleaner for Cd-contaminated site

The use of plant growth-promoting rhizobacteria (PGPR) in decontaminating cadmium-contaminated soil and water is a sustainable and eco-friendly approach. This study aimed to isolate a PGPR strain from the rhizosphere soil of Solanum nigrum and evaluate its potential and mechanisms in remediating Cd-contaminated environments. The results showed that the isolated strain, Klebsiella sp. AW2, can tolerate 240 mg/L Cd2+. Batch biosorption experiments indicated that the optimal conditions for PGPR biosorption were a pH of 5.0, a biosorbent dosage of 1.0 g/L, and a Cd2+ concentration of 10 mg/L, resulting in a biosorption rate of 40.99%. Model fitting results revealed that the Cd biosorption process followed a uniform surface monolayer chemisorption mechanism, likely involving complexation with functional groups such as -NH, -OH, and -C=O, according to Fourier transform infrared spectrometer and desorption experiments. Furthermore, pot experiments demonstrated that PGPR application significantly enhanced the phytoremediation efficiency of Cd-contaminated soil, increasing the phytoextraction ratio by 32.41%. This improvement was primarily achieved by promoting S. nigrum growth and facilitating Cd horizontal transfer from rhizosphere soil to plants through influencing the rhizosphere soil physicochemical properties and Cd2+ influx in roots. In addition, the copy number of the 16S rRNA gene of the PGPR revealed that the PGPR was predominantly localized in the rhizosphere soil, directly leading to increased availability of Cd for plant uptake. Overall, these findings indicate that Klebsiella sp. AW2 is a promising biocleaner for Cd-contaminated environments and provide valuable insights into the application of biosorbents in phytoremediation efforts.

Unveiling the chromate stress response in the marine bacterium Bacillus enclensis AGM_Cr8: a multifaceted investigation

In this study, we introduce Bacillus enclensis AGM_Cr8, a gram-positive marine bacterium isolated from the chronically polluted Versova Creek in Mumbai, India. AGM_Cr8 exhibits robust tolerance to chromate stress, thriving in marine agar media containing up to 3200 mg/l of hexavalent chromium [Cr(VI)], with the Minimum Inhibitory Concentration (MIC) established at 5000 mg/l. Notably, AGM_Cr8 also displays tolerance to other heavy metals, including Lead [Pb (II)] (1200 mg/l), Arsenic [As (III)] (400 mg/l), Cadmium [Cd(II)] (100 mg/l), and Nickel [Ni(II)] (100 mg/l). Scanning Electron Microscopy (SEM) reveals the presence of Cr(VI) on the bacterial surface, accompanied by the secretion of extracellular polymeric substances (EPSs) facilitating Cr(VI) sequestration. This observation is validated through Energy Dispersive Spectroscopy (EDS). Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy-Energy Dispersive Spectroscopy (STEM-EDS) confirm internal bioaccumulation of Cr(VI). X-ray photoelectron spectroscopy (XPS) identifies distinct peaks around 579 and 576 eV, indicating the coexistence of Cr(VI) and Cr(III), implying a bioreduction mechanism. De novo genome sequencing identifies twenty-two chromate-responsive genes, including putative chromate transporters (srpC1 and srpC2), suggesting an efflux mechanism. Other identified genes encode NAD(P)H-dependent FMN-containing oxidoreductase, NADH quinone reductase, ornithine aminotransferase, transporter genes (natA, natB, ytrB), and genes related to DNA replication and repair (recF), DNA mismatch repair (mutH), and superoxide dismutase. We therefore, propose a chromate detoxification pathway that involves an interplay of chromate transporters, enzymatic reduction of Cr(VI) to Cr(III), DNA repair and role of antioxidants in response to chromate stress. We have highlighted the potential of AGM_Cr8 for bioremediation in chromium-contaminated environments, given its robust tolerance and elucidated molecular mechanisms for detoxification.

Multifaceted response surface methodology unravels competitive heavy metal adsorption affinity of immobilized biosorbent formulated from bacterial extracellular polymer of Pseudomonas aeruginosa OMCS-1

A multifaceted experimental design, including factorial design, Face-centered composite design (FCCD), and mixture design, was implemented to explore competitive interaction and adsorption behavior of chromium [Cr(VI)], lead [Pb(II)], and cadmium [Cd(II)] by the immobilized extracellular polymer (EPS) based biosorbent of Pseudomonas aeruginosa OMCS-1, in single and ternary metal solution. The prepared biosorbent preferentially adsorbed Cr (47.6 mg/g), Pb (46.38 mg/g), and Cd (42.02 mg/g) in single metal system, and Pb (43.32 mg/g), Cr (40.03 mg/g) and Cd (35.9 mg/g) in multiple metal system. Adsorption behavior of all metals was successfully interpreted by the Freundlich isotherm model (R2 > 0.988), confirming multilayer sequestration. The Cr, Pb, and Cd biosorption rate followed second-order kinetics (R2 > 0.997), validating chemisorption as predominant mechanism in adsorption. The alternation in the structural morphology of EPS Ca-alginate beads and Cr, Pb, and Cd accumulation, suggesting heavy metal adsorption onto immobilized biosorbent. X-ray diffraction (XRD) pattern of multi-metal loaded biosorbent showed additional crystalline phases, indicating adsorption of metal ions. The significant (p < 0.0001; one-way ANOVA) increase in the zeta potential of Cr, Pb, and Cd loaded EPS Ca-alginate beads revealed the electrostatic interaction between biosorbent and metal ions. The hydroxyl, amine, carboxyl, and phosphate groups of formulated biosorbent contributed for metal sequestration. The adsorption-desorption efficiency retained by the biosorbent after fourth cycle was 35.41 ± 0.2% and 51.44 ± 0.98% for Cr, 51.58 ± 0.15% and 63.98 ± 0.24% for Pb, and 30.68 ± 0.13% and 60.39 ± 0.46% for Cd, respectively. The EPS Ca-alginate beads can potentially eliminate heavy metals from multi-metal contaminated water.

Biodegradation of used engine oil by lead-resistant bacteria Acinetobacter sp.HAR20 newly isolated from harbour seawater (Oran, Algeria)

This paper focuses on the degrading capacity of various hydrocarbon fractions of used engine oils (UEO) by marine microorganisms, as well as the biosorption of heavy metals. A bacterial strain with a significant capability to grow on UEO as a sole source of carbon and energy was isolated from harbour seawater samples (Oran, Algeria). The molecular identification by sequencing the 16S rDNA gene revealed that the bacterium matched Acinetobacter baumanii with 96.84% homology similarity. Thus, strain HAR20 was named Acinetobacter sp.HAR20. The degradation rate of UEO (at 1%, v/v) obtained after 15 days of incubation was about 53.4 ± 4.2%. The results of GC-MS analysis of the biodegraded residual motor oil indicate that strain Acinetobacter sp.HAR20 degrades alkanes with chain lengths ranging from C4 to C48 completely or to shorter fractions. The bacterium was also able to degrade all aromatic compounds of UEO, including polycyclic aromatic hydrocarbons (alkylated and no alkylated naphthalene, alkylated phenanthrene, and fluorene). The strain Acinetobacter sp.HAR20 exhibited different degrees of resistance to the heavy metals tested (Cd, Zn, Ni, Cu, Fe, and Pb). The highest tolerance was obtained for Pb (600 mg.l-1). The study of lead biosorption at a concentration of 300 mg.l-1 revealed that the bacterium displayed a removal rate of 57.47 ± 7.5%. The strain Acinetobacter sp.HAR20 has shown an interesting biodegradation potential; therefore, it could be proposed as a choice for the bioremediation of contaminated seawater by used engine oils.

Isolation of biocrust cyanobacteria and evaluation of Cu, Pb, and Zn immobilisation potential for soil restoration and sustainable agriculture

Soil contamination by heavy metals represents an important environmental and public health problem of global concern. Biocrust-forming cyanobacteria offer promise for heavy metal immobilisation in contaminated soils due to their unique characteristics, including their ability to grow in contaminated soils and produce exopolysaccharides (EPS). However, limited research has analysed the representativeness of cyanobacteria in metal-contaminated soils. Additionally, there is a lack of studies examining how cyanobacteria adaptation to specific environments can impact their metal-binding capacity. To address this research gap, we conducted a study analysing the bacterial communities of cyanobacteria-dominated biocrusts in a contaminated area from South Sardinia (Italy). Additionally, by using two distinct approaches, we isolated three Nostoc commune strains from cyanobacteria-dominated biocrust and we also evaluated their potential to immobilise heavy metals. The first isolation method involved acclimatizing biocrust samples in liquid medium while, in the second method, biocrust samples were directly seeded onto agar plates. The microbial community analysis revealed Cyanobacteria, Bacteroidota, Proteobacteria, and Actinobacteria as the predominant groups, with cyanobacteria representing between 13.3 % and 26.0 % of the total community. Despite belonging to the same species, these strains exhibited different growth rates (1.1-2.2 g L-1 of biomass) and capacities for EPS production (400-1786 mg L-1). The three strains demonstrated a notable ability for metal immobilisation, removing up to 88.9 % of Cu, 86.2 % of Pb, and 45.3 % of Zn from liquid medium. Cyanobacteria EPS production showed a strong correlation with the removal of Cu, indicating its role in facilitating metal immobilisation. Furthermore, differences in Pb immobilisation (40-86.2 %) suggest possible environmental adaptation mechanisms of the strains. This study highlights the promising application of N. commune strains for metal immobilisation in soils, offering a potential bioremediation tool to combat the adverse effects of soil contamination and promote environmental sustainability.

Molecular and eco-physiological responses of soil-borne lead (Pb2+)-resistant bacteria for bioremediation and plant growth promotion under lead stress

Lead (Pb) is the 2nd known portentous hazardous substance after arsenic (As). Being highly noxious, widespread, non-biodegradable, prolonged environmental presence, and increasing accumulation, particularly in arable land, Pb pollution has become a serious global health concern requiring urgent remediation. Soil-borne, indigenous microbes from Pb-polluted sites have evolved diverse resistance strategies, involving biosorption, bioprecipitation, biomineralization, biotransformation, and efflux mechanisms, under continuous exposure to Pb in human-impacted surroundings. These strategies employ a wide range of functional bioligands to capture Pb and render it inaccessible for leaching. Recent breakthroughs in molecular technology and understanding of lead resistance mechanisms offer the potential for utilizing microbes as biological tools in environmental risk assessment. Leveraging the specific affinity and sensitivity of bacterial regulators to Pb2+ ions, numerous lead biosensors have been designed and deployed worldwide to monitor Pb bioavailability in contaminated sites, even at trace levels. Besides, the ongoing degradation of croplands due to Pb pollution poses a significant challenge to meet the escalating global food demands. The accumulation of Pb in plant tissues jeopardizes both food safety and security while severely impacting plant growth. Exploring Pb-resistant plant growth-promoting rhizobacteria (PGPR) presents a promising sustainable approach to agricultural practices. The active associations of PGPR with host plants have shown enhancements in plant biomass and stress alleviation under Pb influence. They thus serve a dual purpose for plants grown in Pb-contaminated areas. This review aims to offer a comprehensive understanding of the role played by Pb-resistant soil-borne indigenous bacteria in expediting bioremediation and improving the growth of Pb-challenged plants essential for potential field application, thus broadening prospects for future research and development.

Bioprospecting of extremophilic perchlorate-reducing bacteria: report of promising Bacillus spp. isolated from sediments of the bay of Cartagena, Colombia

Three extremophile bacterial strains (BBCOL-009, BBCOL-014 and BBCOL-015), capable of degrading high concentrations of perchlorate at a range of pH (6.5 to 10.0), were isolated from Colombian Caribbean Coast sediments. Morphological features included Gram negative strain bacilli with sizes averaged of 1.75 × 0.95, 2.32 × 0.65 and 3.08 × 0.70 μm, respectively. The reported strains tolerate a wide range of pH (6.5 to 10.0); concentrations of NaCl (3.5 to 7.5% w/v) and KClO4- (250 to 10000 mg/L), reduction of KClO4- from 10 to 25%. LB broth with NaCl (3.5-30% w/v) and KClO4- (250-10000 mg/L) were used in independent trials to evaluate susceptibility to salinity and perchlorate, respectively. Isolates increased their biomass at 7.5 % (w/v) NaCl with optimal development at 3.5 % NaCl. Subsequently, ClO4- reduction was assessed using LB medium with 3.5% NaCl and 10000 mg/L ClO4-. BBCOL-009, BBCOL-014 and BBCOL-015 achieved 10%, 17%, and 25% reduction of ClO4-, respectively. The 16 S rRNA gene sequence grouped them as Bacillus flexus T6186-2, Bacillus marisflavi TF-11 (T), and Bacillus vietnamensis 15 - 1 (T) respectively, with < 97.5% homology. In addition, antimicrobial resistance to ertapenem, vancomycine, amoxicillin clavulanate, penicillin, and erythromycin was present in all the isolates, indicating their high adaptability to stressful environments. The isolated strains from marine sediments in Cartagena Bay, Colombia are suitable candidates to reduce perchlorate contamination in different environments. Although the primary focus of the study of perchlorate-reducing and resistant bacteria is in the ecological and agricultural realms, from an astrobiological perspective, perchlorate-resistant bacteria serve as models for astrobiological investigations.

Study on the adsorption performance of fly ash loaded on nano-FeS for chromium-containing wastewater treatment

In view of the problems caused by chromium-containing wastewater, such as environmental pollution, biological toxicity, and human health risks. Based on fly ash adsorption and nano-FeS reduction characteristics, fly ash loaded nano-FeS composite (nFeS-FA) was synthesized using mineral supported modification technology and ultrasonic precipitation method. The effect of adsorbent dosage, initial pH, contact time, and initial concentration of the solution on the adsorption of Cr(VI) and total Cr by nFeS-FA was investigated. The characteristics of Cr(VI) and total Cr adsorption by nFeS-FA were studied using adsorption isotherms, adsorption kinetics principles, as well as XRD, TEM, SEM-EDS, and BET analysis. The results demonstrated that under the conditions of nFeS-FA of 8 g/L, initial pH of 4, contact time of 150 min, and initial concentration of the solution at 100 mg/L, nFeS-FA achieved removal efficiency of 87.85 % for Cr(VI) and 71.77 % for total Cr. The adsorption of Cr(VI) and total Cr by nFeS-FA followed the Langmuir model and pseudo-second-order kinetic model, indicating monolayer adsorption with chemical adsorption as the dominant mechanism. XRD, TEM, SEM-EDS, and BET revealed that the flaky nano-FeS was uniformly distributed on the surface of fly ash, exhibiting good dispersion and thereby increasing the specific surface area. During the adsorption experiments, nFeS-FA reacted with Cr(VI), and the generated Fe3+ mainly existed as FeOOH precipitation, while S2- reacted with Cr(III) to produce Cr2S3 precipitation. Therefore, nFeS-FA exhibited excellent adsorption performance towards Cr(VI) and total Cr. It can serve as a technological reference for the remediation of heavy metal chromium pollution in the field of water treatment.

Yttrium immobilization through biomineralization with phosphate by the resistant strain Mesorhizobium qingshengii J19

AIMS

Yttrium (Y) holds significant industrial and economic importance, being listed as a critical element on the European list of critical elements, thus emphasizing the high priority for its recovery. Bacterial strategies play a crucial role in the biorecovery of metals, offering a promising and environmentally friendly approach. Therefore, gaining a comprehensive understanding of the underlying mechanisms behind bacterial resistance, as well as the processes of bioaccumulation and biotransformation, is of paramount importance.

METHODS AND RESULTS

A total of 207 Alphaproteobacteria strains from the University of Coimbra Bacteria Culture Collection were tested for Y-resistance. Among these, strain Mesorhizobium qingshengii J19 exhibited high resistance (up to 4 mM Y) and remarkable Y accumulation capacity, particularly in the cell membrane. Electron microscopy revealed Y-phosphate interactions, while X-ray diffraction identified Y(PO3)3·9H2O biocrystals produced by J19 cells.

CONCLUSION

This study elucidates Y immobilization through biomineralization within phosphate biocrystals using M. qingshengii J19 cells.

Cellulolytic potential of mangrove bacteria Bacillus haynesii DS7010 and the effect of anthropogenic and environmental stressors on bacterial survivability and cellulose metabolism

Cellulose degrading bacterial diversity of Bhitarkanika mangrove ecosystem, India, was uncovered and the cellulose degradation mechanism in Bacillus haynesii DS7010 under the modifiers such as pH (pCO2), salinity and lead (Pb) was elucidated in the present study. The abundance of cellulose degrading heterotrophic bacteria was found to be higher in mangrove sediment than in water. The most potential strain, B. haynesii DS7010 showed the presence of endoglucanase, exoglucanase and β-glucosidase with the maximum degradation recorded at 48 h of incubation, with 1% substrate concentration at 41 °C incubation temperature. Two glycoside hydrolase genes, celA and celB were confirmed in this bacterium. 3D structure prediction of the translated CelA and CelB proteins showed maximum similarities with glycoside hydrolase 48 (GH48) and glycoside hydrolase 5 (GH5) respectively. Native PAGE followed by zymogram assay unveiled the presence of eight isoforms of cellulase ranged from 78 kDa to 245 kDa. Among the stressors, most adverse effect was observed under Pb stress at 1400 ppm concentration, followed by pH at pH 4. This was indicated by prolonged lag phase growth, higher reactive oxygen species (ROS) production, lower enzyme activity and downregulation of celA and celB gene expressions. Salinity augmented bacterial metabolism up to 3% NaCl concentration. Mangrove leaf litter degradation by B. haynesii DS7010 indicated a substantial reduction in cellulolytic potential of the bacterium in response to the synergistic effect of the stressors. Microcosm set up with the stressors exhibited 0.97% decrease in total carbon (C%) and 0.02% increase in total nitrogen (N%) after 35 d of degradation while under natural conditions, the reduction in C and the increase in N were 4.05% and 0.2%, respectively. The findings of the study suggest the cellulose degradation mechanism of a mangrove bacterium and its resilience to the future consequences of environmental pollution and climate change.

Biosorption of chromium by live and dead cells of Bacillus nitratireducens isolated from textile effluent

Bacillus nitratireducens was isolated from textile effluent and showed high tolerance to chromium (Cr), reaching up to a 1000 mg/L MIC value. This research was aimed at utilizing biosorbents from live and dead cells of B. nitratireducens to remove Cr from an aqueous solution. A batch biosorption test was performed, and mechanisms analysis was approached by an adsorption-desorption test, SEM-EDS, and FTIR analysis. Cr removal by dead cells in 25, 50, and 100 mg/L of Cr were 58.99 ± 0.7%, 69.8 ± 0.2%, and 82.87 ± 0.11%, respectively, while that by live cells was 73.08 ± 1.9%, 80.27 ± 6.33%, and 86.17 ± 1.93%, respectively. Live cells showed significantly higher Cr removal and adsorption capacities as compared to dead cells. In all concentrations, absorption contributed more than adsorption to the Cr removal by both live and dead cells. Absorption of Cr was subjected to occur due to passive mechanisms in dead cells while involving some active mechanisms in live cells. SEM-EDS confirmed the detection of Cr on the cell surface, while FTIR revealed the shifting of some peaks after the biosorption test, suggesting interactions between Cr and functional groups. Further TEM analysis is suggested to be conducted as a future approach to reveal the inner structure of cells and confirm the involvement of absorption mechanisms.

Sustainable approaches for removing toxic heavy metal from contaminated water: A comprehensive review of bioremediation and biosorption techniques

In this comprehensive study, highlights emerging environmentally friendly methods to eliminating hazardous heavy metals from contaminated water, with an emphasis on bioremediation and biosorption. Breakthroughs, such as the combination of biological remediation and nanotechnology to improve the elimination of metals effectiveness and the use of genetically modified microbes for targeted pollutant breakdown. Developing biosorption materials made from agricultural waste and biochar, this indicates interesting areas for future research and emphasizes the necessity of sustainable practices in tackling heavy metal contamination in water systems. There seems to be a surge in enthusiasm for the utilization of biological remediation and biosorption methods as sustainable and viable options for eliminating heavy metals from contaminated water in the past couple of decades. The present review intends to offer an in-depth review of the latest understanding and advances in the discipline of biological remediation methods like bioaccumulation, biofiltration, bio-slurping, and bio-venting. Biosorption is specifically explained and includes waste biomass as biosorbent with the removal mechanisms and the hindrances caused in the process are detailed. Advances in biosorption like microbes as biosorbents and the mechanism involved in it. Additionally, novel enhancement techniques like immobilization, genetic modification, and ultrasound-assisted treatment in microbial sorbent are clarified. However, the review extended with analyzing the future advances in the overall biological methods and consequences of heavy metal pollution.

Deciphering the mechanistic role of Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) in bio-sorption and phyto-assimilation of Cadmium via Linum usitatissimum L. Seedlings

Three Cd2+ resistant bacterium's minimal inhibition concentrations were assessed and their percentages of Cd2+ accumulation were determined by measurements using an atomic absorption spectrophotometer (AAS). The results revealed that two isolates Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52), identified by 16S rDNA gene sequencing, showed a higher percentage of Cd2+ accumulation i.e., 83.78% and 81.79%, respectively. Moreover, both novel strains can tolerate Cd2+ levels up to 2000 mg/L isolated from district Chakwal. Amplification of the czcD, nifH, and acdS genes was also performed. Batch bio-sorption studies revealed that at pH 7.0, 1 g/L of biomass, and an initial 150 mg/L Cd2+ concentration were the ideal bio-sorption conditions for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52). The experimental data were fit to Langmuir isotherm measurements and Freundlich isotherm model R2 values of 0.999 for each of these strains. Bio sorption processes showed pseudo-second-order kinetics. The intra-diffusion model showed Xi values for Bacillus paramycoides (PM51) and Bacillus tequilensis (PM52) of 2.26 and 2.23, respectively. Different surface ligands, was investigated through Fourier-transformation infrared spectroscopy (FTIR). The scanning electron microscope SEM images revealed that after Cd2+ adsorption, the cells of both strains became thick, adherent, and deformed. Additionally, both enhanced Linum usitatissimum plant seed germination under varied concentrations of Cd2+ (0 mg/L, 250 mg/L,350 mg/L, and 500 mg/L). Current findings suggest that the selected strains can be used as a sustainable part of bioremediation techniques.

Study on the adsorption of Zn(II) and Cu(II) in acid mine drainage by fly ash loaded nano-FeS

Aiming at the acid mine drainage (AMD) in zinc, copper and other heavy metals treatment difficulties, severe pollution of soil and water environment and other problems. Through the ultrasonic precipitation method, this study prepared fly ash-loaded nano-FeS composites (nFeS-F). The effects of nFeS-F dosage, pH, stirring rate, reaction time and initial concentration of the solution on the adsorption of Zn(II) and Cu(II) were investigated. The data were fitted by Lagergren first and second-order kinetic equations, Internal diffusion equation, Langmuir and Freundlich isotherm models, and combined with SEM, TEM, FTIR, TGA, and XPS assays to reveal the mechanism of nFeS-F adsorption of Zn(II) and Cu(II). The results demonstrated that: The removal of Zn(II) and Cu(II) by nFeS-F could reach 83.36% and 70.40%, respectively (The dosage was 8 g/L, pH was 4, time was 150 min, and concentration was 100 mg/L). The adsorption process, mainly chemical adsorption, conforms to the Lagergren second-order kinetic equation (R2 = 0.9952 and 0.9932). The adsorption isotherms have a higher fitting degree with the Langmuir model (R2 = 0.9964 and 0.9966), and the adsorption is a monolayer adsorption process. This study can provide a reference for treating heavy metals in acid mine drainage and resource utilization of fly ash.

Unveiling the performance of a novel alkalizing bacterium Enterobacter sp. LYX-2 in immobilization of available Cd

A novel alkalizing strain Enterobacter sp. LYX-2 that could resist 400 mg/L Cd was isolated from Cd-contaminated soil, which immobilized 96.05% Cd2+ from medium. Cd distribution analysis demonstrated that more than half of the Cd2+ was converted into extracellular precipitated Cd through mobilization of the alkali-producing mechanism by the strain LYX-2, achieving the high immobilization efficiency of Cd2+. Biosorption experiments revealed that strain LYX-2 had superior biosorption capacity of 48.28 mg/g for Cd. Pot experiments with Brassica rapa L. were performed with and without strain LYX-2. Compared to control, 15.92% bioavailable Cd was converted to non-bioavailable Cd and Cd content in aboveground vegetables was decreased by 37.10% with addition of strain LYX-2. Available Cd was mainly immobilized through extracellular precipitation, cell-surface biosorption and intracellular accumulation of strain LYX-2, which was investigated through Cd distribution, Scanning Electron Microscope and Energy-Dispersive X-ray Spectroscopy (SEM-EDS), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Photoelectron Spectroscopy (XPS) and Transmission Electron Microscopy (TEM) analysis. In addition, the application of strain LYX-2 significantly promoted the growth of vegetables about 2.4-fold. Above results indicated that highly Cd-resistant alkalizing strain LYX-2, as a novel microbial passivator, had excellent ability and reuse value to achieve the remediation of Cd-contaminated soil coupled with safe production of vegetables simultaneously.

Adsorption of Eosin B from Wastewater onto the Prepared Porous Anion Exchange Membrane

This research describes the fabrication of the porous trimethylamine (TMA)-grafted anion exchange membrane (AEM) over a phase inversion process. The synthesis of the generated AEM was verified using Fourier transform infrared (FTIR) spectroscopy. The fabricated porous AEM showed 240% water uptake (WR), 1.45 mg/g ion exchange capacity (IEC), and a 9.0% linear expansion ratio (LER) at 25 °C. It exhibited a porous structure and higher thermal stability. It was utilized to remove eosin B (EB) from wastewater via the process of adsorption. The adsorption capacity of EB increased with time and the starting concentration of EB while decreasing with temperature and the AEM dosage. Adsorption isotherm investigation results showed that EB adsorption onto the porous AEM followed the Langmuir isotherm because the value of correlation coefficient (R2 = 0.992) was close to unity. Because the correlation coefficient was close to one, it was determined through adsorption kinetic experiments that the adsorption of EB on the produced porous AEM was suitable for a pseudo-second-order model. Thermodynamic study about process of EB adsorption on the porous AEM revealed that there was an exothermic (ΔH° = -16.60 kJ/mol) and spontaneous process.

Arsenic pollution cycle, toxicity and sustainable remediation technologies: A comprehensive review and bibliometric analysis

Arsenic pollution and its allied impacts on health are widely reported and have gained global attention in the last few decades. Although the natural distribution of arsenic is limited, anthropogenic activities have increased its mobility to distant locations, thereby increasing the number of people affected by arsenic pollution. Arsenic has a complex biogeochemical cycle which has a significant role in pollution. Therefore, this review paper has comprehensively analysed the biogeochemical cycle of arsenic which can dictate the occurrence of arsenic pollution. Considering the toxicity and nature of arsenic, the present work has also analysed the current status of arsenic pollution around the world. It is noted that the south of Asia, West-central Africa, west of Europe and Latin America are major hot spots of arsenic pollution. Bibliometric analysis was performed by using scopus database with specific search for keywords such as arsenic pollution, health hazards to obtain the relevant data. Scopus database was searched for the period of 20 years from year 2003-2023 and total of 1839 articles were finally selected for further analysis using VOS viewer. Bibliometric analysis of arsenic pollution and its health hazards has revealed that arsenic pollution is primarily caused by anthropogenic sources and the key sources of arsenic exposure are drinking water, sea food and agricultural produces. Arsenic pollution was found to be associated with severe health hazards such as cancer and other health issues. Thus considering the severity of the issue, few sustainable remediation technologies such as adsorption using microbes, biological waste material, nanomaterial, constructed wetland, phytoremediation and microorganism bioremediation are proposed for treating arsenic pollution. These approaches are environmentally friendly and highly sustainable, thus making them suitable for the current scenario of environmental crisis.

Microbial Removal of Heavy Metals from Contaminated Environments Using Metal-Resistant Indigenous Strains

Contamination of soil with heavy metals has become a matter of global importance due to its impact on agriculture, environmental integrity, and therefore human health and safety. Several microbial strains isolated from soil contaminated by long-term chemical and petrochemical activities were found to manifest various levels of tolerance to Cr, Pb, and Zn, out of which Bacillus marisflavi and Trichoderma longibrachiatum exhibited above-moderate tolerance. The concentrations of target heavy metals before and after bioremediation were determined using electrochemical screen-printed electrodes (SPE) modified with different nanomaterials. The morpho-structural SEM/EDX analyses confirmed the presence of metal ions on the surface of the cell, with metal uptake being mediated by biosorption with hydroxyl, carboxyl, and amino groups as per FTIR observations. T. longibrachiatum was observed to pose a higher bioremediation potential compared to B. marisflavi, removing 87% of Cr and 67% of Zn, respectively. Conversely, B. marisflavi removed 86% of Pb from the solution, compared to 48% by T. longibrachiatum. Therefore, the fungal strain T. longibrachiatum could represent a viable option for Cr and Zn bioremediation strategies, whereas the bacterial strain B. marisflavi may be used in Pb bioremediation applications.

Bacillus sp. strain MRS-1: A potential candidate for uranyl biosorption from uranyl polluted sites

The uranyl tolerance of a metal-resistant Bacillus sp. strain MRS-1, was determined in this current study. This was done due to a rise in anthropogenic activities, such as the production of uranium-based nuclear energy, which contributes to environmental degradation and poses risks to ecosystems and human health. The purpose of the research was to find effective strategies for uranium removal to minimize the contamination. In this paper, the biosorption of uranyl was investigated by batch tests. Bacteria could continue to multiply up to 350 ppm uranyl concentrations, however this growth was suppressed at 400 ppm, that generally accepted as the minimum concentration for bacterial growth inhibition. The optimal conditions for uranyl biosorption were pH 7, 20 °C, and a contact duration of 30 min with living bacteria. According to the findings of an investigation that used isotherm and kinetics models (Langmuir, Freundlich and pseudo second order), Bacillus sp. strain MRS-1 biosorption seemed to be dependent on monolayer adsorption as well as certain functional groups that had a strong affinity for uranyl confirmed by Fourier Transform Infrared Spectroscopy (FTIR) analysis. The shifts/sharping of peaks (1081-3304 cm-1) were prominent in treated samples compared to control one. These functional groups could be hydroxyl, amino, and carboxyl. Our findings showed that Bacillus sp. strain MRS-1 has an elevated uranyl biosorption ability, with 24.5 mg/g being achieved. This indicates its potential as a powerful biosorbent for dealing with uranium contamination in drinking water sources and represents a breakthrough in the cleanup of contaminated ecosystems.

Heavy Metal Tolerance of Microorganisms Isolated from Coastal Marine Sediments and Their Lead Removal Potential

In this study, 338 microorganisms, comprising 271 bacteria and 67 fungi, were isolated from sediment samples collected from underexplored Pacific and Caribbean regions of Colombia. Screening trials were conducted on selected strains (n = 276) to assess their tolerance to cadmium (Cd2+), lead (Pb2+), and zinc (Zn2+), leading to the identification of six bacteria capable of withstanding 750 mg·L-1 of each heavy metal ion. Three promising microorganisms, identified as Enterobacter sp. INV PRT213, Pseudomonas sp. INV PRT215, and Stenotrophomonas sp. INV PRT216 were selected for lead removal experiments using LB broth medium supplemented with 400 mg·L-1 Pb2+. Among these, Pseudomonas sp. INV PRT215 exhibited significant potential, removing 49% of initial Pb2+ after 240 min of exposure (16.7 g wet biomass·L-1, pH 5, 30 °C). Infrared spectra of Pb-exposed biomass showed changes in functional groups, including carbonyl groups of amides, carboxylate, phosphate, hydroxyl, and amine groups, compared to the not-exposed control. These changes suggested interactions between the metal and functional groups in the biomass. The findings of this study highlight the potential of microorganisms derived from coastal marine environments as promising candidates for future applications in bioremediation of polluted environments contaminated with heavy metals.

Cypermethrin adsorption by Lactiplantibacillus plantarum and its behavior in a simulated fecal fermentation model

The presence of cypermethrin in the environment and food poses a significant threat to human health. Lactic acid bacteria have shown promise as effective absorbents for xenobiotics and well behaved in wide range of applications. This study aimed to characterize the biosorption behavior of cypermethrin by Lactiplantibacillus plantarum RS60, focusing on cellular components, functional groups, kinetics, and isotherms. Results indicated that RS60 exopolysaccharides played a crucial role removing cypermethrin, with the cell wall and protoplast contributing 71.50% and 30.29% to the overall removal, respectively. Notably, peptidoglycans exhibited a high affinity for cypermethrin binding. The presence of various cellular surface groups including -OH, -NH, -CH3, -CH2, -CH, -P = O, and -CO was responsible for the efficient removal of pollutants. Additionally, the biosorption process demonstrated a good fit with pseudo-second-order and Langmuir-Freundlich isotherm. The biosorption of cypermethrin by L. plantarum RS60 involved complex chemical and physical interactions, as well as intraparticle diffusion and film diffusion. RS60 also effectively reduced cypermethrin residues in a fecal fermentation model, highlighting its potential in mitigating cypermethrin exposure in humans and animals. These findings provided valuable insights into the mechanisms underlying cypermethrin biosorption by lactic acid bacteria and supported the advancement of their application in environmental and health-related contexts. KEY POINTS: • Cypermethrin adsorption by L. plantarum was clarified. • Cell wall and protoplast showed cypermethrin binding ability. • L. plantarum can reduce cypermethrin in a fecal fermentation model.

Removal of toxic metal Cd (II) by Serratia bozhouensis CdIW2 using in moving bed biofilm reactor (MBBR)

The use of bioreactor technology to treat industrial wastewater containing heavy metals has created new perspectives. Cadmium metal is one of the toxic heavy metals that have harmful effects on human health and the environment. This research work presents a comprehensive approach for aqueous cadmium removal through biosorption in a moving bed biofilm reactor (MBBR). The bacterium resistant to Cd(II) (350 mg/L) CdIW2 was selected among 8 cadmium tolerant bacteria isolated from the industrial wastewater of the metal industry. 16S rRNA gene and phenotypic analysis showed that the bacterium CdIW2 is similar to Serratia bozhouensis. The highest biosorption capacity of 65.79 mg/g was acquired in optimal conditions (30 min, pH = 6, 0.5 g/L, and 35 °C). The biosorption of the CdIW2 strain was consistent with the Langmuir isotherm and the pseudo-second order kinetic and showed the process's spontaneous thermodynamic and endothermic results. The removal rate 91.74% of MBBR in batch mode was obtained in 72 h and 10 mg/L of Cd(II). Furthermore, continuous mode bioreactor analysis has shown high efficiency at intel loading rates of 6-36 mg/L. day for cadmium removal. The second order kinetic (Grau) was chosen as the suitable model for modeling the MBBR process. Although several studies have evaluated the removal of various types of heavy metals, none of the studies involved the use of a metal-resistant strain in an MBBR bioreactor.

Biosorption of U(VI) and mechanisms by live and dead cells of Sphingopyxis sp. YF1

Heavy metal pollution seriously threatens the environment and human health. The biosorption of heavy metals has attracted worldwide attention due to its cost-effectiveness and environmental friendliness. It is significant to develop biosorbents with excellent adsorption performance. Sphingopyxis is widely used in the removal of various organic pollutants, but its potential application in heavy metal adsorption has been largely overlooked. This study investigates the biosorption of U(VI) onto live and dead cells of a Sphingopyxis strain YF1. The effects of pH, contact time and initial ion concentration on U(VI) adsorption investigated, and kinetic and isothermal models were used to fit the adsorption results. The results show that under pH 3-6, the adsorption of U(VI) by YF1 live cells increased with the increase of the pH. Both the pseudo-first order and pseudo-second order models can satisfactorily interpret the adsorption by live and dead cells. Three isothermal adsorption models (Langmuir, Freundlich, and Sips) were used to fit the adsorption process. The adsorption of uranium by live and dead cells was best fitted by the Sips model. The maximal adsorption capacities of U(VI) by live and dead cells were 140.7 mg g-1 and 205.7 mg g-1, respectively. The mechanisms of U(VI) adsorption by Sphingopyxis sp. YF1 were revealed. Scanning electron microscopy and energy dispersive spectroscopy (SEM-EDS) show that U(VI) was deposited on the surface of the bacterial cells. Fourier-transform infrared spectroscopy (FTIR) shows that amine, hydroxyl, alkyl, amide I, amide II, phosphate, carboxylates and carboxylic acids were the major functional groups that are involved in U(VI) adsorption by live and dead cells. X-ray photoelectron spectroscopy (XPS) suggests that the main functional groups of live cells involved in adsorption were O = C-O, C-OH/C-O-C and N-C = O. This study indicates Sphingopyxis sp. YF1 is a high-efficiency U(VI)-adsorbing strain, promising to remove U(VI) from aquatic environment.

Uptake of lead by bacteria isolated from industrial effluents and their potential use in bioremediation of wastewater

Due to rising populations and human activities, heavy metals (HM) toxicity has become a serious problem for all life forms. The present study deals with isolating and identifying lead-resistant bacteria from contaminated wastewater of tanneries effluents. Two isolated strains were identified as Bacillus cereus (ID1), and Bacillus sp. (ID3), and both strains resisted a 25 mM concentration of Lead nitrate (Pb (NO3)2). After four days of treatment, Bacillus cereus (ID1) showed 80% lead uptake, and Bacillus sp. (ID3) showed 88%. Lead uptake was confirmed by Energy dispersive X-Ray (EDX) analysis. Fourier transform infrared spectroscopy (FTIR) showed that structural alterations had occurred in functional groups of the treated samples compared to the controls. Our research indicates that these Bacillus strains may be useful in bioremediating heavy metals from polluted environments. Further investigation into the processes involved in the uptake and homeostasis of heavy metals by these strains is required, as is the identification of the genes and enzymes responsible for Pb-bioremediation.

Ability of Cupriavidus necator H16 to resist, bioremove, and accumulate some hazardous metal ions in water

Bacterial biomasses are suitable and inexpensive biosorbents for the removal of metal ions. The Gram-negative betaproteobacterium Cupriavidus necator H16 is found in soil and freshwater environments. In this study, C. necator H16 was used to remove chromium (Cr), arsenic (As), aluminum (Al), and cadmium (Cd) ions from water. Minimum inhibition concentration (MIC) values of C. necator to Cr, As, Al, and Cd were found as 76, 69, 341, and 275 mg/L, respectively. The highest rates of Cr, As, Al, and Cd bioremoval were 45, 60, 54, and 78%, respectively. pH levels between 6.0 and 8.0 and an average temperature of 30 °C were optimum for the most efficient bioremoval. Scanning electron microscopy (SEM) images of Cd-treated cells showed that the morphology of the cells was significantly impaired compared to the control. Shifts in the Fourier transform infrared spectroscopy analysis (FTIR) spectra of the Cd-treated cell walls also confirmed the presence of active groups. As a result, it can be said that C. necator H16 has a moderate bioremoval efficiency for Cr, As, and Al and a high bioremoval efficiency for Cd.

Staphylococcus edaphicus KCB02A11 incorporated with natural adsorbents: first report on its tolerance and removal of hexavalent chromium [Cr(VI)]

Deteriorating the quality of different parts of the ecosystem due to toxic metals is a serious global issue. Hexavalent chromium is a metal that can cause adverse effects on all living beings, including plants, animals, and microorganisms, on exposure to high concentrations for prolonged periods. Removing hexavalent chromium from various types of wastes is challenging; hence the present study investigated the use of bacteria incorporated with selected natural substrates in removing hexavalent chromium from water. Isolated Staphylococcus edaphicus KCB02A11 has shown higher removal efficiency with a wide hexavalent chromium range (0.025-8.5 mg/L) within 96 h. Incorporating the isolated strain with natural substrates commonly found in the environment (hay and wood husk) showed high removal potential [100% removal with 8.5 mg/L of Cr(VI)], even within less than 72 h, with the formation of biofilms on the used substrates applied for metal removal on a large scale for prolonged periods. This study is the first report investigating hexavalent chromium tolerance and removal by Staphylococcus edaphicus KCB02A11.

Breeding, Biosorption Characteristics, and Mechanism of a Lead-Resistant Strain

To effectively carry out the bioremediation of a Pb²⁺ polluted environment, a lead-tolerant strain named D1 was screened from the activated sludge of a factory in Hefei, and its lead removal in a solution with Pb²⁺ concentration of 200 mg/L could reach 91% under optimal culture conditions. Morphological observation and 16S rRNA gene sequencing were used to identify D1 accurately, and its cultural characteristics and lead removal mechanism were also preliminarily studied. The results showed that the D1 strain was preliminarily identified as the Sphingobacterium mizutaii strain. The experiments conducted via orthogonal test showed that the optimal conditions for the growth of strain D1 were pH 7, inoculum volume 6%, 35 °C, and rotational speed 150 r/min. According to the results of scanning electron microscopy and energy spectrum analysis before and after the D1 exposure to lead, it is believed that the lead removal mechanism of D1 is surface adsorption. The Fourier transform infrared spectroscopy (FTIR) results revealed that multiple functional groups on the surface of the bacterial cells are involved in the Pb adsorption process. In conclusion, the D1 strain has excellent application prospects in the bioremediation of lead-contaminated environments.

Investigation of cadmium and nickel biosorption by Pseudomonas sp. via response surface methodology

The environmental contamination of heavy metals has grown over the last several decades along with global industrialization and now constitutes a serious threat to human health. In this research, high cadmium (Cd) and nickel (Ni) resistant bacteria that were chosen for heavy metal biosorption were isolated from the Industries Factory in Sari, Mazandaran, Iran. Pseudomonas aeruginosa was recognized as the isolated bacterium based on its morphological, physiological, biochemical, antibiotic resistance testing, and 16S rRNA sequences. The bacteria had the highest concentrations of resistance to Cd (up to 1600 ppm) and Ni, according to the Minimum Inhibition Concentration (MIC) test (up to 2000 ppm). Single-factor studies in single and binary systems were used to examine the effects of temperature, contact duration, pH value, starting Cd and Ni concentration, and biomass dose on the Cd and Ni adsorption by P. aeruginosa. The Cd and Ni biosorption in binary solutions was optimized using the response surface methodology (RSM) based on Central Composite Design (CCD). The investigation revealed that at pH 7.0, 45 °C, and 1.5 gL^-1 biomass dose, the greatest biosorption efficiency for Cd and Ni was 92.43 percent and 88.45 percent, respectively. According to the adsorption of Cd and Ni in urban water, under these similarly extreme conditions, Cd adsorption drops to 54% and Ni to 60%. Analysis Potential functional groups involving interactions between cells and metal ions were identified using Fourier transform infrared spectroscopy (FTIR). Different compounds and heavy metal ions were found to have been adsorbed to the surface of the biosorbent by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDS). It was determined that P. aeruginosa had a high rate of Cd and Ni adsorption and that variations in pH level had a greater impact than other parameters. The findings imply that P. aeruginosa biomass may be an effective, economical, and environmentally friendly method for removing Cd and Ni from contaminated settings. It also has a reasonable capacity for biosorption in both a natural environment and a laboratory environment.

An Approach to Evaluate Pb Tolerance and Its Removal Mechanisms by Pleurotus opuntiae

Widespread lead (Pb) contamination prompts various environmental problems and accounts for about 1% of the global disease burden. Thus, it has necessitated the demand for eco-friendly clean-up approaches. Fungi provide a novel and highly promising approach for the remediation of Pb-containing wastewater. The current study examined the mycoremediation capability of a white rot fungus, P. opuntiae, that showed effective tolerance to increasing concentrations of Pb up to 200 mg L−1, evidenced by the Tolerance Index (TI) of 0.76. In an aqueous medium, the highest removal rate (99.08%) was recorded at 200 mg L−1 whereas intracellular bioaccumulation also contributed to the uptake of Pb in significant amounts with a maximum of 24.59 mg g−1. SEM was performed to characterize the mycelium, suggesting changes in the surface morphology after exposure to high Pb concentrations. LIBS indicated a gradual change in the intensity of some elements after exposure to Pb stress. FTIR spectra displayed many functional groups including amides, sulfhydryl, carboxyl, and hydroxyl groups on the cell walls that led to binding sites for Pb and indicated the involvement of these groups in biosorption. XRD analysis unveiled a mechanism of biotransformation by forming a mineral complex as PbS from Pb ion. Further, Pb fostered the level of proline and MDA at a maximum relative to the control, and their concentration reached 1.07 µmol g−1 and 8.77 nmol g−1, respectively. High Pb concentration results in oxidative damage by increasing the production of ROS. Therefore, the antioxidant enzyme system provides a central role in the elimination of active oxygen. The enzymes, namely SOD, POD, CAT, and GSH, served as most responsive to clear away ROS and lower the stress. The results of this study suggested that the presence of Pb caused no visible adverse symptoms in P. opuntiae. Moreover, biosorption and bioaccumulation are two essential approaches involved in Pb removal by P. opuntiae and are established as worthwhile agents for the remediation of Pb from the environment.

DNAzyme-templated exponential isothermal amplification for sensitive detection of lead pollution and high-throughput screening of microbial biosorbents

Very low concentrations of lead (Pb²⁺) pollution can have far-reaching adverse impacts on human health, due to the cumulative toxicity of Pb²⁺. Herein, we report a DNAzyme-templated exponential isothermal amplification strategy (termed DNAzymee) for the ultrasensitive detection of Pb²⁺ pollution and the high-throughput screening of microbial biosorbents to remove Pb²⁺ pollution. DNAzyme can specifically recognize Pb²⁺, and this recognition event can be amplified by the subsequent exponential isothermal amplification reaction (EXPAR) and monitored by a G-quadruplex specific dye. The proposed design showed a low limit of detection (95 pM) and could identify Pb²⁺ pollution in different real samples with high precision. In particular, the proposed assay was used to screen Pb²⁺ biosorbents, and the results showed that Leuconostoc mesenteroides is a promising microbial biosorbent for removing Pb²⁺ pollution. Thus, the DNAzymee assay can serve as a platform to monitor lead pollution in the environment and screen efficient biosorbents for the control of lead pollution.

Pb(II) bioremediation using fresh algal-bacterial aerobic granular sludge and its underlying mechanisms highlighting the role of extracellular polymeric substances

Lead (Pb) discharged from rural industries poses a significant threat to the environment and human health. Algal-bacterial aerobic granular sludge (A-B AGS) is a promising alternative for sewage treatment with high efficiency and good settleability. In this study, Pb(II) biosorption using fresh A-B AGS was investigated for the first time. The important role of extracellular polymeric substances (EPS) was revealed with the involved mechanisms being clarified. The desorbents for Pb recovery from Pb-loaded A-B AGS were also screened. Results showed that A-B AGS has an excellent maximum Pb adsorption capacity of 72.4 mg·g^-1 at pH 6.0. EPS plays an important role in keeping microbial activity, Pb bonding, and providing metal ions (Ca, Na and Mg) for Pb ion exchanges. Electrostatic interaction, ion exchange, and bonding to functional groups may occur orderly in the Pb biosorption process and the formation of pyromorphite (Pb₅(PO₄)₃Cl) contributes to Pb biosorption. About 66 % of the adsorbed Pb was accumulated in the A-B AGS microbial cells. Na₂EDTA (0.05 M) can recover 60.3 % of the loaded Pb with the highest microbial activity of granules being remained. All the findings will provide the theoretical basis for the large-scale application of A-B AGS to bioremediate Pb(II)-containing wastewater.

Sporadic Pb accumulation by plants: Influence of soil biogeochemistry, microbial community and physiological mechanisms

Recent results revealed that considerable Pb accumulation in plants is possible under specific soil conditions that make Pb phytoavailable. In this review, the sources and transformations of Pb in soils, the interaction of Pb with bacteria and specifically the microbiota in the soil, factors and mechanisms of Pb uptake, translocation and accumulation in plants and Pb toxicity in living organisms are comprehensively elaborated. Specific adsorption and post-adsorption transformations of Pb in soil are the main mechanisms affecting the mobility, bioavailability, and toxicity of Pb. The adsorption ability of Pb largely depends on the composition and properties of soils and environmental conditions. Microbial impact on Pb mobility in soil and bioavailability as well as bacterial resistance to Pb are considered. Specific mechanisms conferring Pb-resistance, including Pb-efflux, siderophores, and EPS, have been identified. Pathways of Pb entry into plants as well as mechanisms of in planta Pb transport are poorly understood. Available evidence suggests the involvement of Ca transporters, organic acids and the phytochelatin pathway in Pb transport, mobility and detoxification, respectively.

Methodical study of chromium (VI) ion adsorption from aqueous solution using low-cost agro-waste material: isotherm, kinetic, and thermodynamic studies

This study involved preparation and modification of Saccharum officinarium as adsorbent used for the removal of chromium (VI) ions in a batch process. The adsorbent was modified with oxalic acid for improved performance of the adsorbent by increasing the surface area of the adsorbent. Surface morphology of the adsorbents was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD), while Fourier transform infrared (FT-IR) analysis was carried out before and after the adsorption of Cr (VI) ions to determine the participating functional group in the processes. The optimum adsorption was attained at pH 2 and contact time of 180 min with efficiency of adsorption of 56.7 and 92.6% onto RSO and MSO, respectively. The adsorption capacity increases with increase in initial metal ion concentration of the sorption mixture. The isotherms studies indicate that the experimental data were best fitted to Freundlich, Langmuir, and Sips models with R² = 0.999 for adsorption of Cr (VI) ions onto raw S. officinarium (RSO) and modified S. officinarium (MSO). The maximum adsorption capacity obtained were 227.27 and 243.90 mg*g^-1 while the adsorption energy obtained from D-R were found to be 3.460 and 6.325 kJ*mol^-1 onto RSO and MSO, respectively. This revealed that the physiosorption process was favored in interaction of Cr (VI) ions onto both adsorbents. Separation factors obtained showed that the process is favored with increase in initial concentration of the adsorbate. Thermodynamic parameter values obtained showed that the sorption of Cr (VI) ions onto RSO and MSO is feasible, spontaneous, and endothermic in nature. The positive value of ΔS° indicates increase in disorderliness of the adsorption process. Kinetic data achieved at different initial concentrations of adsorbate have been analyzed, and the mechanism of the reaction was also studied by intra-particle and Bangham kinetic model. Each of the models was tested with R² ˃ 0.9, where pseudo-second-order is the best-fitted model and Bangham mechanism only fitted with adsorption of Cr (VI) ions onto RSO. The reusability potential of RSO and MSO contributes to the economic values and reliability of the adsorbents for removal of Cr (VI) ions from aqueous solution.

An immobilized biosorbent from Paenibacillus dendritiformis dead cells and polyethersulfone for the sustainable bioremediation of lead from wastewater

Heavy metals, including lead, cause serious damage to human health and the surrounding environment. Natural biosorbents arise as environmentally friendly alternatives. In this study, two of the 41 isolates (8EF and 17OS) were the most efficient bacteria for growing on media supplemented with Pb²⁺ (1000 mg/L). At high concentrations up to 2000 mg/L, the pioneer isolate 17OS exhibited remarkable resistance to multiheavy metals. This isolate was identified as Paenibacillus dendritiformis 17OS and deposited in GenBank under accession number ON705726.1. Design-Expert was used to optimize Pb²⁺ metal removal by the tested bacteria. Results indicated that four of six variables were selected using a minimum-run resolution IV experimental design, with a significant affecting Pb²⁺ removal. Temperature and Pb²⁺ concentration were significant positive influences, whereas incubation period and agitation speed were significant negative ones. The tested strain modulated the four significant variables for maximum Pb²⁺ removal using Box-Behnken design. The sequential optimization method was beneficial in increasing biosorption by 4.29%. Dead biomass of P. dendritiformis 17OS was embedded with polyethersulfone to get a hydrophilic adsorptive membrane that can separate Pb²⁺ easily from aqueous solutions. SEM images and FT-IR analysis proved that the new biosorbent possesses a great structure and a lot of surface functional groups with a negative surface charge of - 9.1 mV. The removal rate of 200 mg/L Pb²⁺ from water reached 98% using 1.5 g/L of the immobilized biosorbent. The adsorption isotherm studies were displayed to determine the nature of the reaction. The adsorption process was related to Freundlich isotherm which describes the multilayer and heterogeneous adsorption of molecules to the adsorbent surface. In conclusion, dead bacterial cells were immobilized on a polyether sulfone giving it the characteristics of a novel adsorptive membrane for the bioremediation of lead from wastewater. Thus this study proposed a new generation of adsorptive membranes based on polyethersulfone and dead bacterial cells.

Equilibrium kinetics and thermodynamic studies on biosorption of heavy metals by metal-resistant strains of Trichoderma isolated from tannery solid waste

This study was aimed at finding the metal sorption potential of six indigenous Trichoderma strains by using batch experiments for Cd (II), Cr (VI), Cu (II), and Pb (II). Trichoderma atrobrunneum showed maximum metal biosorption potential at 800 mg L^-1 of initial concentration. Two adsorption isotherm models, (1) Langmuir (2) Freundlich models, were employed on the biosorption data obtained at various initial metal concentrations (10 mg L^-1-200 mg L^-1) and pseudo-first (PSI) and pseudo-second (PSII) order equilibrium kinetic models were subjected to data of agitation time (3-7 days). A maximum correlation coefficient value (R²) of ≤ 1 was observed for the Langmuir and PSII model. Results revealed that pH 6-7 was the best for metal sorption, while metal removal efficiency was increased by increasing temperature (298 K, 303 K, 308 K, 313 K). The results of thermodynamic study parameters (∆G°, ∆H°, ∆S°) indicated that heavy metal biosorption by Trichoderma strains was an endothermic, spontaneous, and feasible process. Moreover, surface characterization analysis through SEM, BET, FTIR, and XRD showed that T. atrobrunneum and Trichoderma sp. could adsorb more metal ions when grown in high metal concentrations. The results indicate that living biomass of T. atrobrunneum and Trichoderma sp. is an effective multi-metal biosorbent that can be used for efficacious bioremediation of bio-treatment of heavy metal polluted wastewater.

Efficient Mn(II) removal mechanism by Serratia marcescens QZB-1 at high manganese concentration

Manganese (Mn(II)) pollution has recently increased and requires efficient remediation. In this study, Serratia marcescens QZB-1, isolated from acidic red soil, exhibited high tolerance against Mn(II) (up to 364 mM). Strain QZB-1 removed a total of 98.4% of 18 mM Mn(II), with an adsorption rate of 71.4% and oxidation rate of 28.6% after incubation for 48 h. The strain synthesized more protein (PN) to absorb Mn(II) when stimulated with Mn(II). The pH value of the cultural medium continuously increased during the Mn(II) removal process. The product crystal composition (mainly MnO₂ and MnCO₃), Mn-O functional group, and element-level fluctuations confirmed Mn oxidation. Overall, strain QZB-1 efficiently removed high concentration of Mn(II) mainly via adsorption and showed great potential for manganese wastewater removal.

Improvement of Zn (II) and Cd (II) Biosorption by Priestia megaterium PRJNA526404 Isolated from Agricultural Waste Water

Heavy metals are considered as dangerous pollutants even in relatively low concentrations. Biosorption is an ecofriendly technology that uses microbial biomasses for adsorbing heavy metals from wastewater on their surfaces based on physicochemical pathways. Ten agricultural wastewater samples were collected from different sites in Sohag Governorate, Egypt. One hundred and nineteen zinc and cadmium-resistant bacterial isolates were recovered from the water samples. Interestingly, the isolate R1 was selected as the most resistant to Zn²⁺ and Cd²⁺. This isolate was morphologically and biochemically characterized and identified by sequencing of 16S rRNA gene as Priestia megaterium, and then deposited in the GenBank database under the accession number PRJNA526404. Studying the effects of pH and contact time on the biosorption process revealed that the maximum biosorption was achieved within 50 min at pH 7 and 8 for Zn²⁺ and Cd²⁺, respectively, by the living and lyophelized biomass of Priestia megaterium PRJNA526404. The preliminary characterization of the main chemical groups present on the cell wall, which are responsible for heavy metal biosorption, was performed by Infrared analysis (IR). Kinetics studies revealed that data were fitted towards the models hypothesized by Langmuir and Freundlich isotherm equations. The maximum capacity values (q_max) for biosorption of zinc and cadmium reached by using living and lyophelized biomass were 196.08; 227.27 and 178.57; 212.777 mg/g, respectively, and it was indicated that lyophilization improved efficiency of the biomass to heavy metals compared to living cells. The results indicated that Priestia megaterium PRJNA526404 had good application prospect in cadmium and zinc water remediation.

Metal tolerance and biosorption of Pb ions by Bacillus cereus RMN 1 (MK521259) isolated from metal contaminated sites

Recent years, metal pollution is an alarming factor to know about protects the environmental ecosystem due to the toxic, persistent and abundant in nature. Metals are present everywhere in the biotic and abiotic samples including soil, water, and microbes. The rate of bioaccumulation and biotransformation are very high. The excess concentration of the metals causes heavy metal pollution or contamination. Due to these defects, the removal of metals using biological sources is heightened in the current research. In this current investigation, the biosorption potential ability of the metal tolerable Bacillus cereus on Pb and Cu rich environment was chosen and thoroughly monitored. The 16s rRNA of the Bacillus cereus was sequenced, and named as Bacillus cereus RMN 1 (MK521259). The various test concentration (10-60 mg/mL) of Pb and Cu was exhibited the maximum removal percentages of 85.2% and 60.2%. The result of bisorption factors exhibited, 300 mg/mL of the biosorbent potency, 60 min contact time and pH 7, and they found to be optimal to remove the maximum of Pb ion from the solution. In the regression coefficients, the Freundlich and Langmuir isotherm models were used to study the adsorption kinetics of metal ions. In addition, the isotherm model confirmed that the of B. cereus biomass medicated metal adsorption was more favourable reaction for metal degradation. With the above evidences, the results of the present investigation proved that B. cereus derived biomass was actively adsorbing the metals ions. Thus we are recommending for the implementation of effective waste water treatment.

Structural Diversity, LC-MS-MS Analysis and Potential Biological Activities of Brevibacillus laterosporus Extract

Lake Mariout is Egypt's degraded coastal marine habitat that encompasses a variety of wastes. The biodiversity and hard environmental conditions allow the co-existence of organisms with high resistance and rich metabolism, making them potential candidates for screening and isolating novel microbial strains. A bacterial isolate (BF202) cultured from the marine sediments of Alexandria's Mariout Lake (Egypt) was tested for its antimicrobial and anticancer potential. The phylogenetic analysis of the isolated strain's 16S rDNA and gyrB revealed that BF202 belongs to Brevibacillus laterosporus (B. laterosporus). Antibiosis of B. laterosporus was confirmed against microbial pathogens including Escherichia coli, Klebsiella pneumoniae, Salmonella typhi, and Staphylococcus aureus. The highest antibacterial activity was detected on glucose peptone medium after 18 h of incubation at 35 °C, and at pH of 7.0 in the presence of mannose and ammonium carbonate as carbon and nitrogen sources, respectively. The cytotoxicity of the methanolic extract against breast cancer (MCF-7) and normal Vero cell lines, using the MTT test, revealed IC50 values of 7.93 and 23.79 µg/mL, respectively. To identify apoptotic and necrotic cells, a flow cytometric analysis using annexin V-FITC/PI dual-labeling was utilized and recorded a higher number of necrotic cells compared to apoptotic ones. Similarly, the cell cycle S-phase arrest was reported. The LC-MS-MS investigation of B. laterosporus extract and the molecular networking database analysis demonstrated five strategic diketopiperazine compounds with antimicrobial and anticancer activities. Taken together, this research shows that the crude extract of B. laterosporus might be an effective agent against drug-resistant bacteria and malignant disorders due to its richness in diketopiperazines.

Biosorption of heavy metals by microorganisms: Evaluation of different underlying mechanisms

Globally, ecotoxicologists, environmental biologists, biochemists, pathologists, and other experts are concerned about environmental contamination. Numerous pollutants, such as harmful heavy metals and emerging hazardous chemicals, are pervasive sources of water pollution. Water pollution and sustainable development have several eradication strategies proposed and used. Biosorption is a low-cost, easy-to-use, profitable, and efficient method of removing pollutants from water resources. Microorganisms are effective biosorbents, and their biosorption efficacy varies based on several aspects, such as ambient factors, sorbing materials, and metals to be removed. Microbial culture survival is also important. Biofilm agglomerates play an important function in metal uptake by extracellular polymeric molecules from water resources. This study investigates the occurrence of heavy metals, their removal by biosorption techniques, and the influence of variables such as those indicated above on biosorption performance. Ion exchange, complexation, precipitation, and physical adsorption are all components of biosorption. Between 20 and 35 °C is the optimal temperature range for biosorption efficiency from water resources. Utilizing living microorganisms that interact with the active functional groups found in the water contaminants might increase biosorption efficiency. This article discusses the negative impacts of microorganisms on living things and provides an outline of how they affect the elimination of heavy metals.