Microplastic pollution in aquatic environments with special emphasis on riverine systems: Current understanding and way forward

Microplastic dynamics and risk projections in West African coastal areas: Developing a vulnerability index, adverse ecological pathways, and mitigation framework using remote-sensed oceanographic profiles

Microplastic pollution presents a serious risk to marine ecosystems worldwide, with West Africa being especially susceptible. This study sought to identify the key factors driving microplastic dynamics in the region. Using NASA's Giovanni system, we analyzed environmental data from 2019 to 2024. Results showed uniform offshore air temperatures due to turbulence (25.22-45.62 K) with significant variations nearshore. Salinity levels remained largely stable (4 PSU) but slightly decreased in southern Nigeria. Surface wind speeds rose from 4.206-5.026 m/s in Nigeria to over 5.848 m/s off Mauritania, while eastward stress hotspots were prominent in Nigeria and from Sierra Leone to Senegal. Photosynthetically available radiation (PAR) beam values peaked off Mauritania and dipped from Nigeria to Sierra Leone, with the inverse pattern observed for diffuse PAR. Hotspots of high absorption, particulate backscattering, elevated aerosol optical depth, and remote sensing reflectance all pointed to substantial particulate matter concentrations. The Microplastic Vulnerability Index (MVI) identifies the coastal stretch from Nigeria to Guinea-Bissau as highly vulnerable to microplastic accumulation due to conditions that favor buildup. In contrast, moderate vulnerability was observed from Guinea-Bissau to Senegal and in Mauritania, where conditions were less extreme, such as higher offshore temperatures that could promote widespread microplastic suspension and cooler nearshore temperatures that favor sedimentation. Increased turbulence and temperatures in coastal areas of Senegal and Mauritania may enhance microplastic transport and impact marine life. In Nigeria, stable coastal conditions-characterized by consistent temperatures, low turbulence, and uniform salinity-may lead to increased persistence and accumulation of microplastics in sensitive habitats like mangroves and coral reefs. These findings highlight the need for region-specific management strategies to address microplastic pollution and effectively protect marine ecosystems.

Microplastics occurrence in sea cucumbers and impacts on sea cucumbers & human health: A systematic review

Microplastics (MPs) are a developing concern in marine environments, with scientists concentrating more on their effects on various creatures. Sea cucumbers (SCs), as suspension and deposit feeders, are expected to be exposed to and consume MPs in their habitat. The purpose of this methodical review is to gather and integrate accessible research on the presence and effects of MPs on SCs. A systematic search of relevant databases yielded relevant papers exploring the occurrence of MPs in SC habitats as well as the possible effects of MP intake on SCs. Bibliometric analysis was also conducted to collect and analyze a large volume of data. Then the papers were sorted (a total of 249) related to the occurrence and effects of MPs in SCs. Finally, targeted data were collected from the articles for the study. The review emphasizes the ubiquity of MPs in SC ecosystems, citing studies that found high quantities in coastal areas and sediment. MPs have a variety of effects on SCs, with some studies indicating that they lower eating efficiency, affect behavior, and cause tissue damage. However, there is still no unanimity on the overall effects of MP exposure on SCs. This review gives a complete summary of the present state of information about the incidence and impact of MPs on SCs, highlighting the need for additional study in this area. Understanding the possible dangers of MPs on SCs is critical for the survival of these ecologically significant creatures.

Occurrence and visual characterization of microplastics from Mahakam River at Tenggarong City, Indonesia

Indonesia generates approximately 7.8 million tons of plastic waste annually, which 4.9 million tons is mismanaged. Presently, there is significant concern on microplastics (MPs) pollution in aquatic environment. The research on the prevalence of MPs in river systems are comparatively lower than the studies conducted on marine systems. The primary goal of this research was to look into the prevalence of MPs in the river water of Mahakam of Tenggarong City, Indonesia. To adequately represent this area, a meticulous selection method was used to find five separate sampling locations, with two stations at each location, positioned 200 m apart on opposite sides of the river. According to the study's findings, MPs has been observed in the range of 19.2 ± 1.8 to 58.5 ± 3.5 particles/l. Based on the MPs type, fragments (43.4 %) were the most common type of MPs found in water samples. Furthermore, 44.6 % of the MPs had size smaller than 1000 μm. The prevalent hues observed in the water samples were transparent and black, composing 75.6 % of overall formation. The determination of microplastic polymers employed Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectroscopy, revealing the presence of various type, such as polyethylene (PE) and polypropylene (PP).

Pyrolysis behavior of sewage sludge coexisted with microplastics: Kinetics, mechanism, and product characteristics

Microplastics can accumulate in the excess sludge from wastewater treatment plants through domestic wastewater. This study investigated the co-pyrolysis behavior of sewage sludge coexisting with two types of microplastics (polyethylene (PE) and polylactic acid (PLA)) and found a superior comprehensive pyrolysis performance. By calculating the difference between theoretical and experimental weight loss during the pyrolysis process, it was found that the incorporation of microplastics PE and PLA created a synergistic effect at 270°C-450 °C, which was confirmed through the Malek method analysis from a pyrolysis mechanism perspective that it could increase the random nuclei on each particle, that is, enhance the heterogeneous diffusion of volatiles. The average activation energy was reduced by 84.99 kJ/mol, as determined using three isoconversional methods: Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink. Regarding the products, the aforementioned synergistic effect led to a reduction in char retention and larger specific surface area of the biochar, while the quantities of gaseous products and bio-oil escalated. Through a thermogravimetric analyzer and Fourier transform infrared spectroscopy (TG-FTIR), an increase in aromatic hydrocarbons, alkanes, aldehydes, ethers, and esters in the gaseous products were detected. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) revealed an increase in hydrocarbons, esters, and alcohols in the bio-oil, and acids and aldehydes decreased, overall enhancing the quality of the bio-oil. This study elucidated that pyrolysis completely transformed microplastics in sludge, thus eliminating environmental risks and provided a theoretical reference for understanding the pyrolysis behavior of sludge containing microplastics.

Critical review on unveiling the toxic and recalcitrant effects of microplastics in aquatic ecosystems and their degradation by microbes

Production of synthetic plastic obtained from fossil fuels are considered as a constantly growing problem and lack in the management of plastic waste has led to severe microplastic pollution in the aquatic ecosystem. Plastic particles less than 5mm are termed as microplastics (MPs), these are pervasive in water and soil, it can also withstand longer period of time with high durability. It can be broken down into smaller particles and can be adsorbed by various life-forms. Most marine organisms tend to consume plastic debris that can be accumulated easily into the vertebrates, invertebrates and planktonic entities. Often these plastic particles surpass the food chain, resulting in the damage of various organs and inhibiting the uptake of food due to the accumulation of microplastics. In this review, the physical and chemical properties of microplastics, as well as their effects on the environment and toxicity of their chemical constituents are discussed. In addition, the paper also sheds light on the potential of microorganisms such as bacteria, fungi, and algae which play a pivotal role in the process of microplastics degradation. The mechanism of microbial degradation, the factors that affect degradation, and the current advancements in genetic and metabolic engineering of microbes to promote degradation are also summarized. The paper also provides information on the bacterial, algal and fungal degradation mechanism including the possible enzymes involved in microplastic degradation. It also investigates the difficulties, limitations, and potential developments that may occur in the field of microbial microplastic degradation.

Effective removal of microplastics by filamentous algae and its magnetic biochar: Performance and mechanism

In recent years, filamentous algae blooms and microplastics (MPs) pollution have become two major ecological and environmental problems in urban water systems. In order to solve these two problems at the same time, this study explored the loading capacity of MPs on fresh filamentous algae, and successfully synthesized magnetic filamentous algae biochar loading with Fe3O4 by hydrothermal method, with the purpose of removing MPs from water. The magnetic filamentous algal biochar was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and so on. Experiments on adsorption kinetics, adsorption isotherms and optimum pH were carried out to explore the adsorption mechanism of MPs on magnetic filamentous algal biochar. The adsorption kinetics and adsorption isotherm models were evaluated, and the selection criterion for the appropriate model was determined by using the residual sum of squares (RSS) and Bayesian information criterion (BIC). Microscope images revealed that fresh filamentous algae could interact with MPs in the form of entanglement, adhesion and encapsulation. The average load of MPs in filamentous algae samples was 14.1 ± 5 items/g dry weight. The theoretical maximum adsorption capacities of polystyrene MPs (PS-MPs) by raw biochar (A500) and magnetic biochar with Fe3O4 (M2A500) were 176.99 mg/g and 215.58 mg/g, respectively. The adsorbent materials gave better reusability because they could be reused up to five times. Overall, these findings have provided new insights into the use of filamentous algae for in situ remediation of fluvial MPs pollution, as well as feasible strategies for the recycling of algal waste.

Incidence of microplastic contamination in fishes of the Ramsar Wetland, Loktak - The world's only floating lake from the Indian Himalayan region

Microplastics are ubiquitous, and their widespread prevalence in the ecosphere has generated concerns about their potential effects on terrestrial and aquatic organisms. However, studies pertaining to ecologically sensitive freshwater ecosystems, such as Ramsar wetlands, is scarce. Therefore, the study was conducted in Loktak, the world's only floating lake, and one of the largest wetland in the Indian Himalayan region. The wetland's degradation and pollution have resulted its inclusion in the Montreux Record, underscoring the need for studying this eco-sensitive freshwater system. This work investigated the (i) abundance, morphotype and size of microplastics in fish, and (ii) chemical composition of the microplastics consumed and accumulated in the fish of Loktak lake. Fish samples representing eight species were collected and analyzed for microplastics. Results revealed that ∼91% of the sampled fish ingested microplastics. Fragment was identified as the predominant morphotype (∼82%). Plastic polymers including polyamide (PA), polystyrene (PS), polycarbonate (PC) and carboxymethyl cellulose (CMC) were detected. The occurrence of heavy metals - chlorine (Cl), palladium (Pd), sodium (Na), zinc (Zn), lead (Pb) and copper (Cu) suggests their adhesion on the microplastics. The occurrence of microplastics in fish indicates pollution in the lake and poses a potential health risks to humans through consumption. Therefore, implementing comprehensive management approaches is imperative to mitigate this emerging pollution and uphold the ecological integrity of the Ramsar site. Substantial information on microplastics and their potential human exposure through fish consumption, particularly in the Indian Himalayan region, remains to be assessed, underscoring the need for extensive study.

Exploring correlations between microplastics, microorganisms, and water quality in an urban drinking water source

The microplastic pollution in freshwater system is gradually becoming more severe, which has led to increasing attention on the distribution and potential harmful effects of microplastics. Moreover, microplastics may have an impact on river ecology and pose risks to ecosystems. Therefore, it is important to reveal this process. This study aimed to explore correlations between microplastics and free-living microorganisms in an urban drinking water source of Xiangjiang River by using multivariate statistical analysis. The results indicated that the abundance of microplastics (size 50 μm to 5 mm) in surface water and sediments ranged from 0.72 to 18.6 (mean ± SD: 7.32 ± 2.36) items L-1 and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw), respectively, suggesting potential microplastic pollution despite the protected status as a drinking water source. Higher microplastic abundances were observed in urban areas and the downstream of wastewater plants, with mostly granular shape, transparent and black color as well as 50-100 μm in size. The multivariate statistical analysis presented that the abundance of microplastics is not significantly correlated with water indicators, due to the complexity of the abundance data. The water indicators showed an obvious correlation with microplastics in colors of transparent and black, and smaller sizes of 50-100 μm. This is also true for microplastics and microorganisms in water and sediment. Proteobacteria was the main prokaryote in water and sediments, being positively correlated with 50-100 μm microplastics; while Chloroplastida was the dominated eukaryotes, presenting a weak correlation with smaller-size microplastics. Overall, when considering the properties of microplastics such as shape, color and size, the potential correlations with water indicators and microorganisms were more evident than abundance. This study provides new insights into the multivariate statistical analysis, explaining the potential correlations among microplastic properties, microorganisms and environmental factors in a river system.

Seasonal variations of microplastics in surface water and sediment in an inland river drinking water source in southern China

The aim of this study was to examine microplastic (size distribution of 0.05-5 mm) occurrence and distribution in drinking water source of XJ River during both flooding and dry periods. Surface water and sediment samples were collected from the CS City section of the river in August and December 2020. During the flooding period, microplastic abundances were observed at 0.72-18.6 (7.32 ± 2.36) items L-1 in surface water and 26.3-302 (150 ± 75.6) items kg-1 dry weight (dw) in sediment. In the dry period, abundances were slightly higher at 2.88-17.7 (11.0 ± 3.08) items L-1 and 27.0-651 (249 ± 182) items kg-1 dw, respectively. Microplastics were found in higher concentrations in urban areas and downstream of wastewater treatment plants, suggesting anthropogenic sources. The diversity in shapes, colors, and types of microplastics in surface waters and sediments indicates specialized enrichment processes and persistent sources of microplastic pollution. Approximately 60 % of the microplastic particles identified fall within the 50-100 μm range. Furthermore, a significant correlation was observed between these smaller-sized particles and the overall prevalence of microplastics. Fourier-transform infrared spectroscopy and scanning electron microscopy indicated that the microplastics had been subjected to weathering in the environment, contributing to the production of oxygen-containing functional groups and surface cleavage features. The utilization of energy dispersive spectroscopy revealed the presence of microplastics associated with various heavy metals, highlighting the intricate nature of microplastic pollution. Moreover, the high abundance of microplastics may pose a potential ecological risk to the aquatic environment of the XJ River. The results of this study demonstrate concerning levels of microplastics in the XJ River, despite its status as a high-quality water source.

Applying the SOR framework to mitigate single-use plastic tableware consumption and why does it work? Solving the dissonance with an extended SOR framework

Although plastic pollution is a critical environmental issue worldwide and household consumption of single-use plastic tableware (SUPT) is a growing concern, research on the determinants of SUPT use is deficient. In light of the prevalent and frequent use of SUPT, the far-reaching nature of its consumption, and its distinctive health concerns, compounded by the lack of dedicated regulations, this article sheds light on the SUPT problem and strives to minimize SUPT consumption. The Stimulus-Organism-Response (SOR) framework has been extensively applied in various contexts but not yet in the context of household SUPT consumption. In this study, we aim to fill the lacuna by examining the motives behind SUPT consumption using two online questionnaires in two Western countries that are known for relatively high domestic SUPT consumption: Israel (Study 1, n = 408) and the USA (Study 2, n = 295). Our findings indicate that personal attitudes toward the plastic problem ("organism" in the SOR taxonomy) mediate the relation between plastic health problem awareness ("stimulus") and SUPT consumption ("response"). Moreover, we identified perceived behavioral control (PBC) as a significant predictor of behavior when behavior is not under volitional control (i.e., an action against the individual's self-interest), as in the SUPT context. Therefore, we propose expanding the SOR framework with the organism comprising attitude and PBC, thus supporting the dissonance theory (double mediation). We suggest that modifying personal attitudes toward the plastic problem by enhancing plastic health problem awareness may strengthen PBC and reduce SUPT consumption. Overall, this study deepens our understanding of SUPT consumption by highlighting the importance of attitude and PBC as mechanisms that link awareness to sustainable behavior.

Effects of microplastics/nanoplastics on Vallisneria natans roots and sediment: Size effect, enzymology, and microbial communities

Microplastics/nanoplastics (MNPs) pollution in different environmental media and its adverse effects on organisms have received increasing attention from researchers. This paper compares the effects of natural concentrations of three different sizes (20 nm, 200 nm, and 2 μm) of MNPs on Vallisneria natans and sediments. MNPs with smaller sizes adhere more readily to V. natans roots, further promoting root elongation. In addition, the larger the particle size of MNPs, the higher the reactive oxygen species level in the roots, and the malondialdehyde level increased accordingly. In the sediment, 20 nm, and 200 nm MNPs increased the activity of related enzymes, including acid phosphatase, urease, and nitrate reductase. In addition, the dehydrogenase content in the treated sediments increased, and the content changes were positively correlated with the size of MNPs. Changes in microorganisms were only observed on the root surface. The addition of MNPs reduced the abundance of Proteobacteria and increased the abundance of Chloroflexi. In addition, at the class level of species composition on the root surface, the abundance of Gammaproteobacteria under the 20 nm, 200 nm, and 2 μm MNP treatments decreased by 21.19%, 16.14%, and 17.03%, respectively, compared with the control group, while the abundance of Anaerolineae increased by 44.63%, 26.31%, and 62.52%, respectively. These findings enhance the understanding of the size effects of MNPs on the roots of submerged plants and sediment.

Marine plastics, circular economy, and artificial intelligence: A comprehensive review of challenges, solutions, and policies

Global plastic production is rapidly increasing, resulting in significant amounts of plastic entering the marine environment. This makes marine litter one of the most critical environmental concerns. Determining the effects of this waste on marine animals, particularly endangered organisms, and the health of the oceans is now one of the top environmental priorities. This article reviews the sources of plastic production, its entry into the oceans and the food chain, the potential threat to aquatic animals and humans, the challenges of plastic waste in the oceans, the existing laws and regulations in this field, and strategies. Using conceptual models, this study looks at a circular economy framework for energy recovery from ocean plastic wastes. It does this by drawing on debates about AI-based systems for smart management. In the last sections of the present research, a novel soft sensor is designed for the prediction of accumulated ocean plastic waste based on social development features and the application of machine learning computations. Plus, the best scenario of ocean plastic waste management with a concentration on both energy consumption and greenhouse gas emissions is discussed using USEPA-WARM modeling. Finally, a circular economy concept and ocean plastic waste management policies are modeled based on the strategies of different countries. We deal with green chemistry and the replacement of plastics derived from fossil sources.

Assessing micro and nanoplastics toxicity using rodent models: Investigating potential mitochondrial implications

Mitochondria's role as a central hub in cellular metabolism and signaling cascades is well established in the scientific community, being a classic marker of organisms' response to toxicant exposure. Nonetheless, little is known concerning the effects of emerging contaminants, such as microplastics, on mitochondrial metabolism. Micro- and nanoplastics present one of the major problems faced by modern societies. What was once an environmental problem is now recognized as an one-health issue, but little is known concerning microplastic impact on human health. Indeed, only recently, human exposure to microplastics was acknowledged by the World Health Organization, resulting in a growing interest in this research topic. Nonetheless, the mechanisms behind micro- and nanoplastics toxicity are yet to be understood. Animal models, nowadays, are the most appropriate approach to uncovering this knowledge gap. In the present review article, we explore investigations from the last two years using rodent models and reach to find the molecular mechanism behind micro- and nanoplastics toxicity and if mitochondria can act as a target. Although no research article has addressed the effects of mitochondria yet, reports have highlighted molecular and biochemical alterations that could be linked to mitochondrial function. Furthermore, certain studies described the effects of disruptions in mitochondrial metabolism, such as oxidative stress. Micro- and nanoplastics may, directly and indirectly, affect this vital organelle. Investigations concerning this topic should be encouraged once they can bring us closer to understanding the mechanisms underlying these particles' harmful effects on human health.

Microplastics in the environment: A critical overview on its fate, toxicity, implications, management, and bioremediation strategies

Microplastics are small plastic pieces ranging in size from 1μ to <5 mm in diameter, are water-soluble, and can be either primary as they are initially created in small sizes or secondary as they develop due to plastic degradation. Approximately 360 million tons of plastic are produced globally every year, with only 7% recycled, leaving the majority of waste to accumulate in the environment and pose a serious threat in the form of microplastics. All ecosystems, particularly freshwater ecosystems, experience microplastic accumulation and are also prone to degrading processes. Degraded microplastics accumulate in many aquatic systems, contaminate them, and enter the food chain as a result of the excessive discharge of plastic trash annually from the domestic to the industrial sector. Due to their pervasiveness, these tiny plastic particles are constantly present in freshwater environments, which are essential to human life. In this sense, microplastic pollution is seen as a worldwide problem that has a detrimental impact on every component of the freshwater environment. Microplastics act as carriers for various toxic components such as additives and other hazardous substances from industrial and urbanized areas. These microplastic-contaminated effluents are ultimately transferred into water systems and directly ingested by organisms associated with a particular ecosystem. The microplastics components also pose an indirect threat to aquatic ecosystems by adsorbing surrounding water pollutants. This review mainly focuses on the sources of microplastics, the ecotoxicity of microplastics and the impact microplastics have on aquatic and marine life, management, and bioremediation of microplastics. Policies and strategies adopted by the Government to combat microplastic pollution are also discussed in this review.

Microplastics in Freshwater Ecosystems of India: Current Trends and Future Perspectives

Microplastics (MPs)-i.e., plastic particles less than 5 mm in length-are becoming a growing environmental concern due to their potential ecotoxicological impacts on aquatic ecosystems. In India, MPs contamination is a significantly growing problem due to increased plastic production as well as its low rate of recycling. As a result, MPs research work in India has gained considerable attention in the last two decades. The objective of this study is to conduct a comprehensive review of the existing scientific literature on MPs in freshwater ecosystems (e.g., lakes and rivers) of India. A bibliographical search was used to conduct the literature review across a number of databases including ScienceDirect, Google Scholar, and ResearchGate. We found that in comparison to the marine ecosystem the source, transport, and fate of MPs in freshwater ecosystems of India are still underexplored, and we found only 18 relevant papers. This review work reveals that there is no standard procedure for separating MPs from water and sediment samples, and as a result, comparing the results was a challenging task. The larger MPs (>500 μm) in water and sediments were identified most commonly using the attenuated total reflection (ATR) Fourier Transform Infrared (FTIR) spectroscopy technique (ATR-FTIR), whereas smaller-sized MPs (<500 μm) were identified using FTIR fitted with a confocal microscope, also known as μ-FTIR imaging or chemical imaging. We found that white-colored fibers and fragments of polypropylene (PP), polyethylene terephthalate (PET), and polyethylene (PE) were the most common polymer types in the freshwater ecosystems of India. Although research on MPs in freshwater ecosystems of India has gained momentum over the past decade, the literature review reveals a limited understanding of the impact of MPs' weathering patterns, the role of biofouling, and the role of water hyacinths on freshwater ecosystem services in India. Furthermore, the fluxes of MPs to the Indian oceans are not constrained, and atmospheric transport in high-altitude mountains, which have already been made fragile by climate change, has not been fully investigated. This study, therefore, calls for additional assessments of MPs in freshwater ecosystems-particularly in the central parts of India.

Recent advances on microplastics pollution and removal from wastewater systems: A critical review

Microplastics (MPs) (plastic particles <5 mm) are globally acknowledged as a serious emerging micropollutant, which passes through various pathways in natural habitats and eventually ends up in our food chain. In this context, the present study critically reviews recent advances in MPs sampling and detection, occurrence, fate, and removal in wastewater treatment plants (WWTPs) by delineating their characteristics that manifest toxicity in the environment via effluent discharge. While there is currently no standard protocol in place, this work examined and compared the latest approaches adopted for improved sampling, sample processing, and characterization of MPs via fluorescence imaging and certified reference materials for method validation. MPs concentration from different sources in the WWTPs varies considerably ranging between 0.28 and 18285 MPs/L (raw wastewater), 0.004-750 MPs/L (effluent), and 0.00023-10380 MPs/kg (sludge). Assessment of MPs removal efficiency across different treatment stages in various in WWTPs has been performed and elucidated their removal mechanisms. The overall MPs removal efficiency in primary, secondary, and tertiary treatment stages in WWTPs reported to be around 57-99%, 78.1-99.4%, and 90-99.2%, respectively. Moreover, the review covers advanced treatment methods for removing MPs, including membrane bioreactors, coagulation/flocculation, ultrafiltration, rapid sand filtration, ozonation, disc filtration, and reverse osmosis, which have been found to be highly effective (>99%). Membrane bioreactors have been proclaimed to be the most reliable secondary treatment technique for MPs removal. Coagulation (92.2-95.7%) followed by ozonation (99.2%) as a tertiary treatment chain has been demonstrated to be the most efficient in removing MPs from secondary-treated wastewater effluent. Further, the review delineates the effect of different treatment stages on the physical and chemical characteristics of MPs, associated toxicity, and potential impact factors that can influence the MPs removal efficiency in WWTPs. Conclusively, the merits and demerits of advanced treatment techniques to mitigate MPs pollution from the wastewater system, research gaps, and future perspectives have been highlighted.

Microplastics in Malaysia's Aquatic Environment: Current Overview and Future Perspectives

Microplastic pollution has adversely affected the aquatic ecosystem, living creatures, and human health. Several studies in Malaysia have provided baseline information on the existence of microplastics in surface water, ingestion by marine life and sediment. Also, humans are exposed to microplastic due to consumption of contaminated abiotic and biotic products, such as processed seafood. Nonetheless, knowledge is still scarce among Malaysian on the potential remediation and pollution management of microplastics, which poses a significant challenge to preserve a good environmental status. Green technologies also other alternative to mitigate the contamination of microplastics for sustainable future. Hence, this review aims to provide an overview of microplastic's occurrence, fate, and implications in Malaysia's aquatic environment. Detection of microplastics from the water surface, ingestion by aquatics, and sediment samples are highlighted. Available different treatment processes toward microplastic remediation are also discussed. Additionally, the potential challenges, current perspective for plastic management in Malaysia, as well as green strategies for reducing microplastic contamination are also put forward. The goal of this work is to improve the understanding of the seriousness of microplastic contamination in aquatic environments, thus encouraging key concerns that need to be investigated further.

Kinetic and Thermodynamic Study of Methylene Blue Adsorption on TiO2 and ZnO Thin Films

In this work, we fabricated and characterized ZnO and TiO₂ thin films, determining their structural, optical, and morphological properties. Furthermore, we studied the thermodynamics and kinetics of methylene blue (MB) adsorption onto both semiconductors. Characterization techniques were used to verify thin film deposition. The semiconductor oxides reached different removal values, 6.5 mg/g (ZnO) and 10.5 mg/g (TiO₂), after 50 min of contact. The pseudo-second-order model was suitable for fitting the adsorption data. ZnO had a greater rate constant (45.4 × 10^-3) than that of TiO₂ (16.8 × 10^-3). The removal of MB by adsorption onto both semiconductors was an endothermic and spontaneous process. Finally, the stability of the thin films showed that both semiconductors maintained their adsorption capacity after five consecutive removal tests.

Recent analytical techniques, and potential eco-toxicological impacts of textile fibrous microplastics (FMPs) and associated contaminates: A review

Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.

Sediment bacterial and fungal communities exhibit distinct responses to microplastic types and sizes in Taihu lake

Microplastics (MPs) are emerging contaminants in aquatic environments, yet their impact on sediment microbiota and biogeochemical processes were not well reported. Herein, microcosm experiments were performed to investigate the effects of MPs (Polystyrene, PS and Polyethylene, PE) with three size classes (ranging from 100 nm to 150-200 μm) on sediment bacterial and fungal communities over 60-day incubation from Taihu Lake. High-throughput sequencing revealed the alpha diversities of bacterial and fungal communities were reduced by MPs, dependent on MPs' size and type. Bacterial community structures were significantly altered under all MPs treatments, with clustering for the same size class for PS and PE. Fungal community structures were significantly affected for all MPs, with PS and PE exhibiting different effects. Co-occurrence network analysis suggested MPs changed bacterial and fungal network complexities. Proteobacteria and Ascomycota formed strong associations with other phyla and demonstrated tolerance to MPs exposure. Actinobacteria, Firmicutes, and Chytridiomycota were the main respondents to MPs. The enzyme concentrations were stimulated by MPs, indicating carbon and nitrogen uptakes might be increased. Therefore, PS and PE had similar impacts on the microbial community (particularly bacteria), and sizes of MPs were the main influencing factors. MPs shifted community structure and network with distinct responses from bacteria and fungi, likely leading to the alteration of microbial-involved carbon and nitrogen cycling.

Caddisfly Larvae are a Driver of Plastic Litter Breakdown and Microplastic Formation in Freshwater Environments

Plastic litter is now pervasive in the aquatic environment. Several marine and terrestrial organisms can fragment plastic with their feeding appendages, facilitating its breakdown and generating microplastics. However, similar studies with freshwater organisms are extremely limited. We explored the interactions between the caddisfly larvae Agrypnia sp. and polylactic acid (PLA) film. The use of plastic by larvae to build their protective cases was investigated, along with their ability to fragment the plastic film as they do with leaf litter. Caddisfly consistently incorporated PLA into their cases alongside leaf material. They also used their feeding appendages to rapidly fragment PLA-forming hundreds of submillimeter-sized microplastics. Although larvae showed a preference for leaf material when constructing cases, plastic use and fragmentation still occurred when leaf material was replete, indicating that this behavior is likely to occur in natural environments that are polluted with plastics. This is thought to be the first documented evidence of active plastic modification by a freshwater invertebrate and therefore reveals a previously unidentified mechanism of plastic fragmentation and microplastic formation in freshwater. Further work is now needed to determine the extent of this behavior across freshwater taxa and the potential implications for the wider ecosystem. Environ Toxicol Chem 2022;41:3058-3069. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Microplastic prevalence in anatolian water frogs (Pelophylax spp.)

Frogs are on the verge of extinction due to various biotic and abiotic stressors. Rivers, lakes, ponds, wetlands, and ditches that make up their habitats are exposed to different anthropogenic pollutants. Today, plastics stand out among these pollutants due to their widespread use; however, the information on microplastic (MP) accumulation in frogs is insufficient. In the present study, adult frog samples were collected from 19 different stations in Türkiye, including marsh frogs (Pelophylax ridibundus) from 18 stations and levantine frogs (Pelophylax bedriagae) from 1 station. MP was found in 147 (82.4%) of the 176 frogs that were analyzed. MP abundance in frogs varied between 0.20 and 18.93 MP individual^-1. The characterization of MPs was determined predominantly as follows; PET (70.1%) in polymer type, fiber (92.2%) in shape, navy blue/blue (76.1%) in color, and >90% were smaller than 300 μm. No significant relationship with frog's weight (correlation coefficient = 0.01, P = 0.812) or length (correlation coefficient = 0.06, P = 0.473) and MP abundance was detected. The outcomes of this survey might be a baseline to assess the ecological risks posed by MPs and to guide future experimental research.

Does marine environmental research meet the challenges of marine pollution induced by the COVID-19 pandemic? Comparison analysis before and during the pandemic based on bibliometrics

The outbreak of the COVID-19 pandemic has brought enormous challenges to the global marine environment. Various responses to the COVID-19 pandemic have led to increased marine pollution. Has the COVID-19 pandemic affected marine pollution research? This work comprehensively reviewed marine pollution publications in the Web of Science database before and during the COVID-19 pandemic. Results show that the COVID-19 outbreak has influenced the marine pollution research by: (i) increasing the number of publications; (ii) reshaping different countries' roles in marine pollution research; (iii) altering the hotspots of marine pollution research. The ranking of countries with high productivity in the marine pollution research field changed, and developed economies are the dominant players both before and after the outbreak of the COVID-19 pandemic in this field. Other high-productivity countries, with the exception of China, have higher international cooperation rates in marine pollution research than those before the pandemic. Microplastic pollution has been the biggest challenge of marine pollution and has been aexplored in greater depth during the COVID-19 pandemic. Furthermore, the mining results of marine pollution publications show the mitigation of plastic pollution in the marine environment remains the main content requires future research. Finally, this paper puts forward corresponding suggestions for the reference of researchers and practitioners to improve the global ability to respond to the challenges posed by the pandemic to the marine environment.

Can COVID-19 pandemic change plastic contamination? The Case study of seven watercourses in the metropolitan city of Milan (N. Italy)

The more or less extensive lockdowns, quarantines, smart working and the closure of numerous recreational or personal care activities due to the COVID-19 pandemic have not only heavily changed the habits and behaviors of all of us, but have also had consequences on the release of some types of pollutants. The aim of this study was to evaluate the possible changes due to the indirect effects of the pandemic in the contamination of plastic mixtures sampled in 9 sites of the main watercourses of the metropolitan city of Milan (N. Italy), which is one of the major industrialized and urbanized areas in Italy. To achieve this goal, we carried out two sampling campaigns, the first one carried out in November 2019, before the arrival of the SARS-CoV-2 virus in Italy, the second in November 2020, during a severe regional lockdown that coincided with other restrictions imposed at the national level. The main results showed a difference in contamination of plastics between the two samplings, not so much due to a quantitative variation, but certainly qualitative. We obtained non-homogeneous data with respect to changes in the number of plastics sampled in the different waterbodies, while it was evident that the plastics' contamination has shifted from a primary and industrial origin to one due to a secondary origin of the sampled plastics, linked especially to the fragmentation of common use objects, or deriving from synthetic garments.

Magnetic/electric field intervention on oil-rich filamentous algae production in the application of acrylonitrile butadiene styrene based wastewater treatment

Globally, the release of acrylonitrile-butadienestyrene (ABS) wastewater from numerous industries is a serious concern. Recently, oil-rich filamentous algae Tribonema sp has been grown utilizing toxic but nutrient-rich ABS effluent. Here, Tribonema sp. was cultivated under intervention of different magneto-electric combinatory fields (MCFs) (control, 0.6 V/cm, 1 h/d-1.2 V/cm, 1 h/d-0.6 V/cm, and 1 h/d-1.2 V/cm). Results showed MCF (1 h/d-0.6 V/cm) intervention increased the biomass by 9.7% (2.4 g/L) combined with high removal efficiencies (95% and 99%) of ammonium nitrogen and total phosphorus. The chemical oxygen demand (COD) removal rate increased to 82%, 6% higher than the control. Moreover, MCF of 1 h/d-0.6 V/cm significantly increased lipid and carbohydrate by 7.71% and 4.73% respectively. MCF increased premium fatty acid content such as palmitic acid (C16:0), myristic acid (C14: 0), and hexadecenoic acid (C16:1). MCF intervention also supported a diverse microbial flora, offering a favorable solution for ABS wastewater treatment.

Comparative analysis of microplastic organization and pollution risk before and after thawing in an urban river in Beijing, China

Urban rivers are potential sinks for microplastic (MP) contamination in the environment. However, the footprint of MPs in urban rivers is not well understood because it is influenced by natural and anthropogenic factors. This study focused on the occurrence, pollution risk, and potential sources of MPs in surface water and sediments before and after thawing in Shahe River, Beijing. The size distribution, morphological characteristics and polymer types of MPs were analyzed using a micro-Raman spectroscopy. The results showed that the average abundance of MP obviously increased after river thawing, from 1772 ± 1668 items·m^-3 to 3877 ± 2517 items·m^-3 in surface water and 4776 ± 4817 items·kg^-1 to 14,004 ± 5371 items·kg^-1 in sediments. The MP polymer types were more diverse after thawing. The main MP type in surface water changed from polyethylene terephthalate (PET) to polypropylene (PP). Moreover, PP was the most common type in sediments. Small-sized MPs (SMPs, 10-300 μm) were dominant in Shahe River, with the proportion increasing from 48.5% to 83.3% in surface water and from 84.3% to 94.4% in sediments after thawing. Although the MP pollution risk increased after thawing, it was still low in the Shahe River. Unfortunately, changes in polymer types caused by thawing and the emergence of toxic polymers increased the ecological risk in the urban river. These results revealed the information of MP contamination before and after thawing, and highlighted the barrier influence of river icing on the migration of MPs. Overall, the results presented a new perspective on the environmental behavior of microplastics in urban rivers, suggesting that the occurrence and dominance of SMPs and the emergence of toxic polymers in urban environmental media require close attention in the future.

The High Risk of Bivalve Farming in Coastal Areas With Heavy Metal Pollution and Antibiotic-Resistant Bacteria: A Chilean Perspective

Anthropogenic pollution has a huge impact on the water quality of marine ecosystems. Heavy metals and antibiotics are anthropogenic stressors that have a major effect on the health of the marine organisms. Although heavy metals are also associate with volcanic eruptions, wind erosion or evaporation, most of them come from industrial and urban waste. Such contamination, coupled to the use and subsequent misuse of antimicrobials in aquatic environments, is an important stress factor capable of affecting the marine communities in the ecosystem. Bivalves are important ecological components of the oceanic environments and can bioaccumulate pollutants during their feeding through water filtration, acting as environmental sentinels. However, heavy metals and antibiotics pollution can affect several of their physiologic and immunological processes, including their microbiome. In fact, heavy metals and antibiotics have the potential to select resistance genes in bacteria, including those that are part of the microbiota of bivalves, such as Vibrio spp. Worryingly, antibiotic-resistant phenotypes have been shown to be more tolerant to heavy metals, and vice versa, which probably occurs through co- and cross-resistance pathways. In this regard, a crucial role of heavy metal resistance genes in the spread of mobile element-mediated antibiotic resistance has been suggested. Thus, it might be expected that antibiotic resistance of Vibrio spp. associated with bivalves would be higher in contaminated environments. In this review, we focused on co-occurrence of heavy metal and antibiotic resistance in Vibrio spp. In addition, we explore the Chilean situation with respect to the contaminants described above, focusing on the main bivalves-producing region for human consumption, considering bivalves as potential vehicles of antibiotic resistance genes to humans through the ingestion of contaminated seafood.

Interactions Between Plastic, Microbial Biofilms and Gammarus pulex: An Initial Investigation

There is increasing evidence that microbial biofilms which form on the surface of marine plastics can increase plastics palatability, making it more attractive to organisms. The same information, however, does not exist for freshwater systems. This study observed the response of the freshwater amphipod Gammarus pulex when exposed to 3 cm-diameter discs of biofilm-covered plastic, both alone and when presented alongside its natural food. G. pulex did not fragment or consume the plastic materials, and the presence of colonised plastic in the immediate environment did not alter the amount of time organisms spent interacting with their natural food. This study provides baseline information for virgin and microbially colonised low-density polyethylene and polylactic acid film. Further studies, with other types of plastic possessing different physical properties and with different microbial biofilm compositions are now required to build further understanding of interactions between plastic, microbial biofilms, and freshwater shredding invertebrates.

Plastic-containing food waste conversion to biomethane, syngas, and biochar via anaerobic digestion and gasification: Focusing on reactor performance, microbial community analysis, and energy balance assessment

To manage the mixture of food waste and plastic waste, a hybrid biological and thermal system was investigated for converting plastic-containing food waste (PCFW) into renewable energy, focusing on performance evaluation, microbial community analysis, and energy balance assessment. The results showed that anaerobic digestion (AD) of food waste, polyethylene (PE)-containing food waste, polystyrene (PS)-containing food waste, and polypropylene (PP)-containing food waste generated a methane yield of 520.8, 395.6, 504.2, and 479.8 mL CH₄/gVS, respectively. CO₂ gasification of all the plastic-containing digestate produced more syngas than pure digestate gasification. Syngas from PS-digestate reached the maximum yield of 20.78 mol/kg. During the digestate-derived-biochar-amended AD of PCFW, the methane yields in the biochars-amended digesters were 6-30% higher than those of the control digesters. Bioinformatic analysis of microbial communities confirmed the significant difference between control and biochar-amended digesters in terms of bacterial and methanogenic compositions. The enhanced methane yields in biochars-amended digesters could be partially ascribed to the selective enrichment of genus Methanosarcina, leading to an improved equilibrium between hydrogenotrophic and acetoclastic methanogenesis pathways. Moreover, energy balance assessment demonstrated that the hybrid biological and thermal conversion system can be a promising technical option for the treatment of PCFW and recovery of renewable biofuels (i.e., biogas and syngas) and bioresource (i.e., biochar) on an industrial scale.

Investigation of microplastics in sludge from five wastewater treatment plants in Nanjing, China

Municipal wastewater treatment plants (WWTPs) have been regarded as the main receptors of microplastics in industrial and domestic wastewater. The excess sludge they generate is an important carrier for the microplastics to enter the environment. In China, relevant regional studies are still in an initial phase. In this work, microplastics in the sewage sludges at different sampling points of five WWTPs in Nanjing City (an important city in the Yangtze River basin) were investigated, including their abundance, morphology and chemical composition. Furthermore, the influence factors such as population density, economic development level, wastewater source and treatment process were also discussed. The analysis results through optical microscope and FT-IR showed that the detected microplastics were divided into fragments, films, fibers and granules. Their chemical component reached up to 19 species, including small amounts of petroleum resins which was scarcely detected in other studies. Wastewater source was the primary factor influencing the microplastic abundance and size in sludge. And the microplastic shape and chemical components were closely related to the industrial type. Furthermore, because the removal effect on the microplastics with different morphologies were varied with the treatment process, the preliminary suggestions on the technology for particular wastewater were proposed. This study provides partial regional data and analysis for the microplastics contained in the sludge of WWTPs, expecting to provide a certain theoretical support for the operations management of WWTPs and standardized sludge treatment.

A proposed nomenclature for microplastic contaminants

Microplastics are emerging contaminants with a wide environmental distribution and potential to elicit adverse impacts on organisms. Despite this lack of consistency among reports, data obtained from different investigations are often compared, resulting in the potential for misrepresentation of global microplastic contamination. Major interlaboratory variability in quantification of microplastic levels stem from size-related differences in sampling and analysis with different density solutions to separate microplastics. Herein, we propose a nomenclature that provides key information relating to the microplastics abundance in samples. That is, the proposed nomenclature, MPs_c^{a, b}, informs on mesh or filter size used in sampling, the density of flotation solution used to separate the microplastics, and the detection limit during the analysis progress of microplastics. This proposed nomenclature would facilitate comparisons among studies to avoid over- or under-estimation of global microplastic levels. Moreover, it would also facilitate the interpretation of meta-data in future assessments.