A comprehensive review on the use of conductive materials to improve anaerobic digestion: Focusing on landfill leachate treatment

Enhancing methane production in anaerobic digestion via improved electron transfer with dual-reaction-centers catalyst

The recovery of methane from waste-activated sludge and rice straw often encounters challenges due to inefficient electron transfer between microorganisms. To break through this bottleneck, a novel and effective strategy is urgently needed. Here, we propose adding dual reaction centers (DRCs) catalyst with electron-rich and electron-poor microregions into the anaerobic digestion (AD) system. Pigeon manure was transformed into a novel DRCs catalyst, Fe-PMC, through pyrolysis and doping. Our findings indicate that the micro-electric field on the surface of Fe-PMC effectively aggregated humic acid-like substances and increased sludge conductivity. Compared to the control group (0 mg/L), adding trace amounts of Fe-PMC (40 mg/L) significantly increased methane production by 27.45%. High-throughput sequencing analyses revealed that Fe-PMC enhanced the relative abundance of functional microorganisms, such as Geobacter (23.62%) and Methanobacterium (35.53%), thereby promoting methanogenic co-metabolism. Furthermore, functional genes associated with carbon dioxide reduction to methane and direct interspecific electron transfer were upregulated by 3.41%-297.66%. This study provides a valuable reference for recovering renewable energy from waste using DRCs catalysts.

Shewanella oneidensis and Methanosarcina barkerii augmentation and conductive material effects on long-term anaerobic digestion performance

This study explores the use of conductive material in scaling up anaerobic digestion for enhanced biogas production. Focusing on Direct Interspecies Electron Transfer (DIET), the research employs a syntrophic DIET-able consortium formed by Shewanella oneidensis and Methanosarcina barkerii in 3.8-L experiments utilizing reticulated vitreous carbon (RVC) as conductive material. In short-term tests with acetate the syntrophic co-culture with RVC resulted in 86% higher maximum velocity of methane production, while in long term with real feed 13% increased rate was observed: the addition of 1.77 (S/m)*m2 RVC resulted in a faster methane production of 2.39 mL/gVS*h compared to 2.08 mL/gVS*h of the reference. The experimental conditions of syntrophic inoculum and RVC as conductive material gave a benefit in terms of process rate compared to the reference, considering the inoculum fate, Methanosarcina barkerii was among the dominant taxa at the end of the experiment, while Shewanella oneidensis was outcompeted. Among the methanogenesis production pathways, an increase of hydrogenotrophic methanogenesis has been observed in presence of conductive material. Further research is needed to understand the role of RVC in sulfur compounds production. Utilization of RVC to augment methane production yielded interesting results for real-scale application. As an added carrier, RVC remains unaltered and can be readily recuperated and reused multiple times.

Anaerobic treatment of nitrogenous industrial organic wastewater by carbon-neutral processes integrated with anaerobic digestion and partial nitritation/anammox: Critical review of current advances and future directions

Anaerobic digestion combined with partial nitritation/anammox technology holds promising potential for the carbon-neutral treatment of nitrogenous industrial organic wastewater, boasting remarkable advantages in effective removal of both organic matters and nitrogen, bio-energy recovery and carbon emission reduction. This study provides a concise overview of the development and advantages of anaerobic digestion combined with partial nitritation/anammox technology for treating nitrogenous industrial organic wastewater. The process excels in removing organic matter and nitrogen, recovering bio-energy, and reducing carbon emissions, compared to traditional physicochemical and biological methods. Case studies highlight its energy-saving and efficient attributes, especially for carbon-neutral nitrogen removal. Challenges for achieving stable operation in the future are discussed, and the study offers insights into the broader application of this integrated process in industrial wastewater treatment.

Characterization of potentially toxic elements in leachates from active and closed landfills in Nigeria and their effects on groundwater systems using spatial, indexical, chemometric and health risk techniques

This study examines potentially toxic elements (PTEs) in leachates from three landfills (active and closed sites) to quantify and compare their degree of toxicity and percolation effects on aquifer groundwater based on distance zonation. The finding revealed that the active landfill leachates had higher concentrations (P < 0.05) of PTEs, with EC, TDS, Cd, Cu, Fe, Zn, Pb, and Mn being above the standard limits for wastewater. The leachate pollution index confirmed high toxicity of the active sites. The geospatial maps suggest that the aquifer was influenced by leachate migration effects, with the groundwater situated within 100 m of the landfills exceeding the regulatory limits. Based on the Ficklin-Caboi assessment, the groundwaters were categorized into "low metals-near neutral" and "high metals-near neutral." The contamination degree, heavy metal contamination index, groundwater quality index, and water pollution index denote that over 40% of the groundwaters are "highly to extremely" polluted and are unfit for drinking, while over 50% are "excellently pure." The geospatial maps revealed that all the groundwaters within 100 m of the landfills are polluted, especially those near the active landfills. The prevailing factors impairing the quality of groundwater were Pb > Cd > TDS > Fe > EC > Cr > pH > Mn > Se > Co. The correlation coefficients, principal components, and cluster analyses confirmed the heterogeneous nature of the landfills and that the solid wastes were mainly from industrial, commercial, and household sources. Aside from the migration effect of leachates, other anthropogenic and geological factors are influencing the aquifer systems. The health risk assessment showed that the groundwaters within 100-500 m of the landfills are capable of causing noncarcinogenic and cancer health risks in exposed populations, with children and those within the distance of 100 m being the most vulnerable groups.

Simultaneous Production of Biogas and Electricity from Anaerobic Digestion of Pine Needles: Sustainable Energy and Waste Management

Power scarcity and pollution can be overcome with the use of green energy forms like ethanol, biogas, electricity, hydrogen, etc., especially energy produced from renewable and industrial feedstocks. In hilly areas, pine needles are the most abundant biomass that has a low possibility of valorization due to high lignin content. On the other hand, anaerobic digestion (AD) of lignin and animal waste has low biogas yield due to poor conductivity. This study focuses on the simultaneous production of biogas and electricity through the co-digestion of cow dung and pine needles. The digester was initially established and stabilized in the lab to ensure a continuous supply of inoculum throughout the experiment. The optimization process involved the determination of an ideal cow dung-to-water ratio and selecting the appropriate conductive material that can enhance the energy generation from the feedstock. Afterward, both batch and continuous anaerobic digestion experiments were conducted. The results revealed that the addition of powdered graphite (5 mM), activated charcoal (15 mM), and biochar (25 mM) exhibited maximum voltage of 0.71 ± 0.013 V, 0.56 ± 0.013 V, and 0.49 ± 0.011 V on the 30th, 25th and 20th day of AD, respectively. The batch experiment showed that 5 mM graphite powder enhanced electron transfer in the AD process and generated a voltage of 0.77 ± 0.014 V on the 30th day, indicating an increase of ~1.5-fold as compared to the control (0.56 ± 0.019 V). The results from the continuous AD process showed that the digester with cow dung, pine needle, and a conductive material in combination exhibited the maximum voltage of 0.76 ± 0.012 V on the 21st day of AD, while the digester with cow dung only exhibited a maximum voltage of 0.62 ± 0.015 V on the 22nd day of AD, representing a 1.3-fold increase over the control. Furthermore, the current work used discarded plastic items and electrodes from spent batteries to emphasize waste management and aid in attaining sustainable energy and development goals.

Silver nanoparticles incorporated with superior silica nanoparticles-based rice straw to maximize biogas production from anaerobic digestion of landfill leachate

Treating hazardous landfill leachate poses significant environmental challenges due to its complex nature. In this study, we propose a novel approach for enhancing the anaerobic digestion of landfill leachate using silver nanoparticles (Ag NPs) conjugated with eco-friendly green silica nanoparticles (Si NPs). The synthesized Si NPs and Ag@Si NPs were characterized using various analytical techniques, including transmission electron microscopy, X-ray diffraction, and Fourier-transform infrared spectroscopy. The anaerobic digestion performance of Si NPs and Ag@Si NPs was tested by treating landfill leachate samples with 50 mg/L of each NP. The results demonstrated an enhancement in the biogas production rate compared to the control phase without the nanocomposite, as the biogas production increased by 14% and 37% using Si NPs and Ag@Si NPs. Ag@Si NPs effectively promoted the degradation of organic pollutants in the leachate, regarding chemical oxygen demand (COD) and volatile solids (VS) by 58% and 65%. Furthermore, microbial analysis revealed that Ag@Si NPs enhanced the activity of microbial species responsible for the methanogenic process. Overall, incorporating AgNPs conjugated with eco-friendly green Si NPs represents a sustainable and efficient approach for enhancing the anaerobic digestion of landfill leachate.

Integrating advanced techniques and machine learning for landfill leachate treatment: Addressing limitations and environmental concerns

This review article explores the challenges associated with landfill leachate resulting from the increasing disposal of municipal solid waste in landfills and open areas. The composition of landfill leachate includes antibiotics (0.001-100 μg), heavy metals (0.001-1.4 g/L), dissolved organic and inorganic components, and xenobiotics including polyaromatic hydrocarbons (10-25 μg/L). Conventional treatment methods, such as biological (microbial and phytoremediation) and physicochemical (electrochemical and membrane-based) techniques, are available but face limitations in terms of cost, accuracy, and environmental risks. To surmount these challenges, this study advocates for the integration of artificial intelligence (AI) and machine learning (ML) to strengthen treatment efficacy through predictive analytics and optimized operational parameters. It critically evaluates the risks posed by recalcitrant leachate components and appraises the performance of various treatment modalities, both independently and in tandem with biological and physicochemical processes. Notably, physicochemical treatments have demonstrated pollutant removal rates of up to 90% for various contaminants, while integrated biological approaches have achieved over 95% removal efficiency. However, the heterogeneous nature of solid waste composition further complicates treatment methodologies. Consequently, the integration of advanced ML algorithms such as Support Vector Regression, Artificial Neural Networks, and Genetic Algorithms is proposed to refine leachate treatment processes. This review provides valuable insights for different stakeholders specifically researchers, policymakers and practitioners, seeking to fortify waste disposal infrastructure and foster sustainable landfill leachate management practices. By leveraging AI and ML tools in conjunction with a nuanced understanding of leachate complexities, a promising pathway emerges towards effectively addressing this environmental challenge while mitigating potential adverse impacts.

A review of existing methods for predicting leachate production from municipal solid waste landfills

Landfilling is one of the predominant methods of municipal solid waste (MSW) disposal worldwide, while the generation of leachate, a kind of toxic wastewater, is among the primary factors behind landfill instability and environmental contamination problems. Precise prediction of leachate production is crucial to landfill safety evaluation and design. This paper presents a comprehensive review of methods for predicting leachate production from MSW landfills. Firstly, compositional characteristics of MSW and leachate generation mechanism are analysed. Factors influencing leachate production are summarised based on the generation mechanism, including the components of MSW, climatic conditions, landfill structure, and environmental factors. Then, we classified the existing methods for predicting leachate production into four categories: water balance formula, water balance model, empirical formula, and artificial intelligence model methods. Advantages, disadvantages, and applicability of different leachate production prediction methods are compared and analysed. Furthermore, limitations in the existing leachate production prediction methods for MSW landfills and scope for future research are discussed.

Hydrothermal liquefaction of municipal sludge and its products applications

Hydrothermal liquefaction (HTL) is an effective medium-temperature, high-pressure thermochemical process to dispose municipal sludge (MS), and biocrude (a crude bio-oil) is its main product. Many efforts are continued extensively to improve conversion efficiency and to promote industrial application of this technology. This work focuses on critical influencing factors (e.g., reaction temperature, residence time, atmosphere, solvent, catalyst, and pretreatment) and fundamental transformation mechanisms of main components (i.e., lipids, proteins, and carbohydrates) in MS HTL. It also analyzes migration behavior of heavy metals during MS HTL, which can provide a reference for subsequent recovery of nutrients from HTL products. Moreover, the applications of MS HTL products are systematically expounded, and potential challenges and opportunities are highlighted as well. It is necessary to develop advanced methods of catalyst recovery and innovative biocrude upgrading methods so as to reduce HTL investment and operating costs. Reusing aqueous phase and solid phase products as reaction medium and catalyst carrier separately after MS HTL is feasible to realize resource utilization of MS. This information can provide valuable guidance to promote MS HTL industrialization.

Modelling biochemical oxygen demand in a large inland aquaculture zone of India: Implications and insights

Water quality surveillance is tough, and a specific timely management is necessary for the inland aquaculture ponds and ecology as well. Real time quality monitoring involves the study of numerous parameters includes physical (turbidity, temperature, and specific conductivity), chemical (pH, calcium, manganese, chlorides, iron, biochemical oxygen demand), and biological (bacteria and algae). It is also crucial to recognize the inter-dependence among the parameters. Alternatively, these relationships can be predicted with statistical and numerical modelling. Organic strength parameter 5-day biochemical oxygen demand (BOD) is a significant parameter to evaluate since its impact is very high on the quality of water, aquatic life, and other biological concerns. This study focuses on the prediction of BOD using six traditional and four boosting algorithms considering ten input physicochemical attributes. The attributes were fine-tuned for highly precise predictions by removing extreme values from the data set using data outlier treatment. The prediction results are compared using performance metrics such as coefficient of determination (R2), root mean square error (RMSE), mean square error (MSE), and mean absolute error (MAE). The findings revealed that boosting algorithms outperform the results of traditional models with the highest prediction accuracy. Among the boosting algorithms, eXtreme Gradient Boosting algorithm (XGBM) is found highly appropriate for the inland aquaculture waters with R2 = 0.95, RMSE = 0.31, MSE = 0.09, MAE = 0.1. Finally, this study provides a systematic evaluation of the BOD in the aquaculture waters and has a significant contribution to water management and eco-balance.

Boosting thermophilic anaerobic digestion with conductive materials: Current outlook and future prospects

Thermophilic anaerobic digestion (TAD) can provide superior process kinetics, higher methane yields, and more pathogen destruction than mesophilic anaerobic digestion (MAD). However, the broader application of TAD is still very limited, mainly due to process instabilities such as the accumulation of volatile fatty acids and ammonia inhibition in the digesters. An emerging technique to overcome the process disturbances in TAD and enhance the methane production rate is to add conductive materials (CMs) to the digester. Recent studies have revealed that CMs can promote direct interspecies electron transfer (DIET) among the microbial community, increasing the TAD performance. CMs exhibited a high potential for alleviating the accumulation of volatile fatty acids and inhibition caused by high ammonia levels. However, the types, properties, sources, and dosage of CMs can influence the process outcomes significantly, along with other process parameters such as the organic loading rates and the type of feedstocks. Therefore, it is imperative to critically review the recent research to understand the impacts of using different CMs in TAD. This review paper discusses the types and properties of CMs applied in TAD and the mechanisms of how they influence methanogenesis, digester start-up time, process disturbances, microbial community, and biogas desulfurization. The engineering challenges for industrial-scale applications and environmental risks were also discussed. Finally, critical research gaps have been identified to provide a framework for future research.

Simultaneous production of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from recovered volatile fatty acid with treatment of leachate by Pilot-Scale Mechanical Vapor Recompression

Serious global problems faced due to many petroleum-based materials in the last century, which is called the plastic age, constitute the main motivation of this research. Considering wastewater treatment from this perspective, both the recovery of organic acids from wastewater and their conversion into bioplastics are extremely important in terms of reducing petroleum dependency. In this study, while the treatment of landfill leachate was provided with biological process integrated into Mechanical Vapor Recompression (MVR), simultaneously PHBV production was carried out with 84.9% recovered VFA as carbon source. The effects of C/N/P ratio and feeding regime on PHBV storage were investigated by Cupriavidus necator. PHBV storage of 96% (g PHBV/g DCW) was maximized by 2-stage feeding and nitrogen restriction. The ratio of 3HV to 3HB of PHBV was 45%. In addition, extracted PHBV was compared with standard PHA in terms of thermal and chemical properties with FTIR, XRD, TGA and DSC analyses.

Magnetite Alters the Metabolic Interaction between Methanogens and Sulfate-Reducing Bacteria

It is known that the presence of sulfate decreases the methane yield in the anaerobic digestion systems. Sulfate-reducing bacteria can convert sulfate to hydrogen sulfide competing with methanogens for substrates such as H2 and acetate. The present work aims to elucidate the microbial interactions in biogas production and assess the effectiveness of electron-conductive materials in restoring methane production after exposure to high sulfate concentrations. The addition of magnetite led to a higher methane content in the biogas and a sharp decrease in the level of hydrogen sulfide, indicating its beneficial effects. Furthermore, the rate of volatile fatty acid consumption increased, especially for butyrate, propionate, and acetate. Genome-centric metagenomics was performed to explore the main microbial interactions. The interaction between methanogens and sulfate-reducing bacteria was found to be both competitive and cooperative, depending on the methanogenic class. Microbial species assigned to the Methanosarcina genus increased in relative abundance after magnetite addition together with the butyrate oxidizing syntrophic partners, in particular belonging to the Syntrophomonas genus. Additionally, Ruminococcus sp. DTU98 and other species assigned to the Chloroflexi phylum were positively correlated to the presence of sulfate-reducing bacteria, suggesting DIET-based interactions. In conclusion, this study provides new insights into the application of magnetite to enhance the anaerobic digestion performance by removing hydrogen sulfide, fostering DIET-based syntrophic microbial interactions, and unraveling the intricate interplay of competitive and cooperative interactions between methanogens and sulfate-reducing bacteria, influenced by the specific methanogenic group.

A review of application of combined biochar and iron-based materials in anaerobic digestion for enhancing biogas productivity: Mechanisms, approaches and performance

Strengthening direct interspecies electron transfer (DIET), via adding conductive materials, is regarded as an effective way for improving methane productivity of anaerobic digestion (AD). Therein, the supplementation of combined materials (composition of biochar and iron-based materials) has attracted increasing attention in recent years, because of their advantages of promoting organics reduction and accelerating biomass activity. However, as far as we known, there is no study comprehensively summarizing the application of this kind combined materials. Here, the combined methods of biochar and iron-based materials in AD system were introduced, and then the overall performance, potential mechanisms, and microbial contribution were summarized. Furthermore, a comparation of the combinated materials and single material (biochar, zero valent iron, or magnetite) in methane production was also evaluated to highlight the functions of combined materials. Based on these, the challenges and perspectives were proposed to point the development direction of combined materials utilization in AD field, which was hoped to provide a deep insight in engineering application.

Next-Generation Water Treatment: Exploring the Potential of Biopolymer-Based Nanocomposites in Adsorption and Membrane Filtration

This review article focuses on the potential of biopolymer-based nanocomposites incorporating nanoparticles, graphene oxide (GO), carbon nanotubes (CNTs), and nanoclays in adsorption and membrane filtration processes for water treatment. The aim is to explore the effectiveness of these innovative materials in addressing water scarcity and contamination issues. The review highlights the exceptional adsorption capacities and improved membrane performance offered by chitosan, GO, and CNTs, which make them effective in removing heavy metals, organic pollutants, and emerging contaminants from water. It also emphasizes the high surface area and ion exchange capacity of nanoclays, enabling the removal of heavy metals, organic contaminants, and dyes. Integrating magnetic (Fe2O4) adsorbents and membrane filtration technologies is highlighted to enhance adsorption and separation efficiency. The limitations and challenges associated are also discussed. The review concludes by emphasizing the importance of collaboration with industry stakeholders in advancing biopolymer-based nanocomposites for sustainable and comprehensive water treatment solutions.

In-situ membrane fouling control and performance improvement by adding materials in anaerobic membrane bioreactor: A review

Anaerobic membrane bioreactor (AnMBR) is a promising treatment technique for various types of wastewaters, and is preferred over other conventional aerobic and anaerobic methods. However, membrane fouling is considered a bottleneck in AnMBR system, which technically blocks membrane pores by numerous inorganics, organics, and other microbial substances. Various materials can be added in AnMBR to control membrane fouling and improve anaerobic digestion, and studies reporting the materials addition for this purpose are hereby systematically reviewed. The mechanism of membrane fouling control including compositional changes in extracellular polymeric substances (EPSs) and soluble microbial products (SMPs), materials properties, stimulation of antifouling microbes and alteration in substrate properties by material addition are thoroughly discussed. Nonetheless, this study opens up new research prospects to control membrane fouling of AnMBR, engineered by material, including compositional changes of microbial products (EPS and SMP), replacement of quorum quenching (QQ) by materials, and overall improvement of reactor performance. Regardless of the great research progress achieved previously in membrane fouling control, there is still a long way to go for material-mediated AnMBR applications to be undertaken, particularly for materials coupling, real scale application and molecular based studies on EPSs and SMPs, which were proposed for future researches.

Application of Bioelectrochemical Systems and Anaerobic Additives in Wastewater Treatment: A Conceptual Review

The interspecies electron transfer (IET) between microbes and archaea is the key to how the anaerobic digestion process performs. However, renewable energy technology that utilizes the application of a bioelectrochemical system together with anaerobic additives such as magnetite-nanoparticles can promote both direct interspecies electron transfer (DIET) as well as indirect interspecies electron transfer (IIET). This has several advantages, including higher removal of toxic pollutants present in municipal wastewater, higher biomass to renewable energy conversion, and greater electrochemical efficiencies. This review explores the synergistic influence of bioelectrochemical systems and anaerobic additives on the anaerobic digestion of complex substrates such as sewage sludge. The review discussions present the mechanisms and limitations of the conventional anaerobic digestion process. In addition, the applicability of additives in syntrophic, metabolic, catalytic, enzymatic, and cation exchange activities of the anaerobic digestion process are highlighted. The synergistic effect of bio-additives and operational factors of the bioelectrochemical system is explored. It is elucidated that a bioelectrochemical system coupled with nanomaterial additives can increase biogas-methane potential compared to anaerobic digestion. Therefore, the prospects of a bioelectrochemical system for wastewater require research attention.

Successive choline addition enhancing the methanogenesis of waste activated sludge anaerobic digestion: Insight from hydrophilicity, electrochemical performance and microbial community

Anaerobic digestion (AD) is a promising technology to treat waste-activated sludge, previous study proved that methane production could be enhanced with the addition of choline, this work aimed to solve the problem of rapid biodegradability of choline in the AD process by changing its dosing method. With 0.75 g/L as the optimal choline dosing concentration, experimental results showed that successive choline dosing during the first 3-6 days of AD (experimental groups, EGs) performed better than the single dosing. The accumulative biogas production in EGs was increased by 35.55-36.73%, which could be caused by the simultaneous promotion of hydrolysis-acidification and methanogenesis processes. Especially, the electron exchange capacity of digested sludge in EGs was increased by 16.71-34.58%. In addition, the surface Gibbs free energy (△G_SL) of sludge in EGs was 105.51-172.21% higher (corresponding to stronger hydrophilicity and repulsion), which might help disperse sludge flocs and improve mass transfer efficiency, and the △G_SL values were positively correlated with the accumulative methane production (R² = 0.7029). Microbiological analysis showed that microbial communities in EGs were richer and Methanosaeta was regarded as the dominant species with 15.93-30.08% higher relative abundance with choline addition. According to Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis, EGs were found to be more active in metabolism clusters. Collectively, these findings demonstrated that successive choline dosing during the first 3-6 days is an effective and novel method to enhance methane production in AD process.

Enhanced performance and mechanism of the combined process of ozonation and a semiaerobic aged refuse biofilter for mature landfill leachate treatment

A semiaerobic aged refuse biofilter (SAARB) can effectively treat mature landfill leachate (ML), but prolonged operation can lead to the enrichment of pollutants in the biofilter, resulting in severely degraded treatment performance. In this study, we constructed a combination process of ozonation and a SAARB to treat ML based on the principles of selective oxidation of aromatic organics by ozone and the preference of microorganisms for ozonation products. The results showed that the removal of organic and nitrogen pollutants became extremely poor after long-term treatment of ML using the SAARB alone. The decrease of chemical oxygen demand (COD), light absorbance at 254 nm (UV₂₅₄), NH₄⁺, and total nitrogen (TN) improved significantly after recirculating the ozonated ML effluent (OLE) into the SAARB, and the removal extents increased significantly to 63.59% (COD), 26.14% (UV₂₅₄), 92.85% (NH₄⁺), and 52.04% (TN), respectively. In addition, the recirculation of OLE enhanced the complete denitrification and tolerance to high NH₄⁺ loading by the SAARB. An analysis of the community composition of 16S_bacteria and ammonia oxidation bacteria (AOB) showed that long-term treatment of ML using the SAARB alone had difficulty enriching the dominant functional bacteria. In the OLE recirculation stage, environmental factors-such as influent organic matter species and concentration, nitrogen pollutant concentration, and pH-were changed to influence the community composition of 16S_bacteria and AOB and enrich functional bacteria (e.g., Truepera, Luteibacter, and Nitrosospira). Therefore, ozonation combined with a SAARB can remove organic and nitrogen pollutants more effectively. In particular, this can be used to solve the problem of inefficient total nitrogen removal using the SAARB alone. This study provides a theoretical reference for the efficient and stable operation of biological processes when treating ML.

Landfill leachate treatment by graphite engineered anaerobic membrane bioreactor: Performance enhancement and membrane fouling mitigation

Low efficiency of anaerobic digestion and membrane fouling, treating landfill leachate, are big barriers in the application of anaerobic membrane bioreactor (AnMBR). Anaerobic digestion enhancement and membrane fouling mitigation of AnMBR with graphite addition, treating landfill leachate, were investigated in this study. The effect of graphite on organics removal, biogas production, methane content in biogas, membrane fouling, microbial responses and foulant compositions were analyzed. With the graphite addition, chemical oxygen demand (COD) removal of 78% was achieved for influent COD concentration of 3000 mg/l, which was significantly higher than the stage without graphite addition (65%) for influent COD concentration of 2000 mg/l. Similarly, methane content in biogas with graphite addition was 56%, while without graphite addition it was 46%. These digestion improvements were due to the promotion of organics degradation, facilitated by direct interspecies electron transfer (DIET) mechanism via graphite addition in AnMBR. The graphite addition prolonged membrane cleaning cycle from 13 days to 30 days. Protein content in loosely bound extracellular polymeric substance (LB-EPS) was the main fouling agent, which decreased with the graphite addition. The main mechanism behind membrane fouling mitigation was the protein content reduction in LB-EPS, which was biodegraded by Trichococcus being increased in relative abundance with the graphite addition. Furthermore, abundance of Denitratisoma decreased in anaerobic sludge and its accumulation reduced on membrane surface, subsequently membrane fouling was mitigated. Overall, graphite addition in AnMBR is a potential eco-innovative approach that efficiently removes pollutants from landfill leachate, enhances biogas quality and mitigates membrane fouling.

A new cutting-edge review on the bioremediation of anaerobic digestate for environmental applications and cleaner bioenergy

Circular agriculture and economy systems have recently emerged around the world. It is a long-term environmental strategy that promotes economic growth and food security while reducing negative environmental consequences. Anaerobic digestion (AD) process has a high contribution and effective biodegradation route for bio-wastes valorization and reducing greenhouse gases (GHGs) emissions. However, the remaining massive digestate by-product contains non-fermented organic fractions, macro and/or micro-nutrients, heavy metals, and metalloids. Direct application of digestate in agriculture negatively affected the properties of the soil due to the high load of nutrients as well as the residuals of GHGs are emitted to the environment. Recycling and valorizing of anaerobic digestate is the main challenge for the sustainable biogas industry and nutrients recovery. To date, there is no global standard process for the safe digestate handling. This review described the biochemical composition and separation processes of anaerobic digestate. Further, advanced physical, chemical, and biological remediation's of the diverse digestate are comprehensively discussed. Moreover, recycling technologies such as phyco-remediation, bio-floc, and entomoremediation were reviewed as promising solutions to enhance energy and nutrient recovery, making the AD technology more sustainable with additional profits. Finally, this review gives an in-depth discussion of current biorefinery technologies, key roles of process parameters, and identifies challenges of nutrient recovery from digestate and prospects for future studies at large scale.

Role of interspecies electron transfer stimulation in enhancing anaerobic digestion under ammonia stress: Mechanisms, advances, and perspectives

Ammonia stress is a commonly encountered issue in anaerobic digestion (AD) process when treating proteinaceous substrates. The enhanced relationship between syntrophic bacteria and methanogens triggered by interspecies electron transfer (IET) stimulation is one of the potential mechanisms for an improved methane yield from the AD plant under ammonia-stressed condition. There is, however, lack of synthesized information on the mechanistic understanding of IET facilitation in the ammonia-stressed AD processes. This review critically discusses recovery of AD system from ammonia-stressed condition, focusing on H₂ transfer, redox compound-mediated IET, and conductive material-induced direct IET. The effects and the associated mechanisms of IET stimulation on mitigating ammonia stress and promoting methanogenesis were elucidated. Finally, prospects and challenges of IET stimulation were critically discussed. This review highlights, for the first time, the critical role of IET stimulation in enhancing AD process under ammonia-stressed condition.