Occurrence and prevalence of antibiotics in wastewater treatment plants and effluent receiving rivers in South Africa using UHPLC-MS determination

Au-Ag alloy nanourchins as a highly efficient SERS tag synergistically with MOF@Au for the ultrasensitive detection of oxytetracycline

Oxytetracycline (OTC) is a potent bactericide, prolonged ingestion may result in hepatic injury and other adverse reactions. Therefore, this study proposed an Au-Ag alloy nanourchins synergistically with layered metal-organic framework (MOFs)@Au as SERS substrate to achieve highly sensitive analysis of OTC in food. Firstly, Au-Ag alloy nanourchins@toluidine blue (TB) combined with Hp2 (AAA-NUs@TB@Hp2), as high-efficiency SERS signal tags, were synthesized to produce a strong Raman signal due to the abundant tips. Besides, layered metal-organic frameworks (MOFs) with a high specific surface area can effectively immobilize substantial quantities of Au NPs and HP1 (MOF@Au@Hp1) and served as SERS substrate, thereby enhancing the sensitivity and uniformity of the sensor. At this time, the absence of the OTC hindered the binding between AAA-NUs@TB@HP2 and MOF@Au@Hp1, resulting in a negligible Raman signal. In the presence of the OTC, the enzyme-free dual-cycle amplification strategy based on entropy-driven DNA reactions and catalytic hairpin assembly (CHA) was activated, resulting AAA-NUs@TB@Hp2 associated with MOF@Au@Hp1, which could significantly amplify the local electromagnetic field and synergistically boosted the TB Raman signal. By this principle, The biosensor exhibited high sensitivity to OTC with a detection limit as low as 6.97 × 10-15 mol/L, which hold significant promise for antibiotic detection in food.

Elucidating Semiconducting Properties and Photocatalytic Performance of Surface-Decorated BiVO4 for the Removal of Contaminants of Emerging Concern

Photocatalysis has been shown to be a promising and ecofriendly approach to the removal of contaminants of emerging concern (CECs). However, preventing the recombination of photogenerated charge carriers and achievement of suitable band edge positions are still major challenges to ensuring better performance. Herein, we report the preparation of surface-decorated BiVO4 with both a noble metal (Ag) and transition metal (Fe). The structural, morphological, and semiconducting features of the material were examined employing various techniques (XRD, SEM, UV-DRS, PL, and photoelectrochemical tests). The band gap of surface-modified BiVO4 is slightly narrower compared to pristine material, which is further validated by HOMO-LUMO gaps obtained through theoretical modeling approaches. The recombination of photogenerated charges was successfully reduced in the case of Ag-Fe-BiVO4, as proven by lower PL intensity and increased current density. The comparative photocatalytic degradation of the CECs ciprofloxacin (CIP) and perfluorooctanoic acid (PFOA) was conducted employing pristine BiVO4 and its two surface-modified analogues (Ag-BiVO4, and Ag-Fe-BiVO4) under solar light. Ag-Fe-BiVO4 was shown to be the most efficient; however, its effectiveness differed depending on CEC type. Under the same process conditions, degradation of CIP reached 93.9%, while PFOA was degraded only partially (22.9%).

Tracing antibiotics in sewers: Concentrations, measurement techniques, and mathematical approaches

Antibiotic contamination in sewer networks has significant environmental and health concerns worldwide, primarily due to its role in promoting bacterial resistance. In this literature review, antibiotic concentrations reported in urban sewers and hospital effluents, techniques for antimicrobial compound detection and quantification, and current modeling strategies are analyzed and discussed based on 91 papers published between 2014 and 2024. One-hundred and nine antibiotic compounds were reported across 80 studies, with sulfonamides, fluoroquinolones, and macrolides being the most frequently detected classes, while amphenicols and aminocyclitols were the least monitored. Advanced analytical techniques such as liquid chromatography and mass spectrometry are the most common approaches used for antibiotic quantification. Modeling efforts remain limited, with kinetic models, Risk Quotient (RQ) assessments, and Wastewater-Based Epidemiology (WBE) representing the main approaches identified. This review compiles 992 reports into a comprehensive dataset intended to support future research, especially for global monitoring, the development of predictive models, and the formulation of regulatory frameworks for managing antibiotic pollution in sewer systems.

Development of novel biochar adsorbent using agricultural waste biomass for enhanced removal of ciprofloxacin from water: Insights into the isotherm, kinetics, and thermodynamic analysis

Increase in the antibiotic's usage and mis-management in antibiotics' disposal has led to the occurrence of antibiotic residues in the surface water bodies. These residues may pose considerable risks to the human as well as aquatic organisms owing to the enhancement in antimicrobial resistance among microbes. Hence, precautionary measures are need of the hour to curtail the occurrence of antibiotic compounds in water. In addition, rampant burning of agricultural waste in India causes considerable air pollution. Considering this, a novel adsorbent has been developed from agricultural waste biomass, viz. wheat straw (WS), through calcination (CWS), followed by chemical activation (AWS). These adsorbents were employed for the removal of ciprofloxacin (CIP) from water. Removal efficiency of 90% (for CWS) and 98% (for AWS) could be achieved at neutral pH in room temperature conditions. The maximum adsorption capacity of ciprofloxacin on synthesized adsorbent was evaluated as 14.51 mg g-1. Experimental findings were further explored to get the insights of isotherm, kinetics, and thermodynamics involved in the process. It was found that Langmuir model (with R2 value of 0.985) provided a better fit than the other isotherm models. Kinetics and thermodynamic studies revealed that adsorption process followed the pseudo second order linear kinetic model (with R2 value of 0.999) with endothermic and spontaneous sorption of ciprofloxacin on developed adsorbent. Thus, wheat straw waste may suitably be used as adsorbent for the removal of antibiotics from water.

Voltammetric methodology for the quality control and monitoring of sulfamethoxazole removal from water

Sulfamethoxazole is an antibiotic that is among the drugs most frequently found in waters around the world because of its habitual consumption and its high chemical stability that prevents it from being eliminated from the environment. In this study, an electroanalytical methodology based on differential pulse voltammetry is developed for the analysis of sulfamethoxazole at trace levels in water. After the optimization of the instrumental parameters a linear range from 6.59 to 96.27 μM was found with limits of detection and quantification of 1.98 and 6.59 μM, respectively, with an RSD below 6 %. Moreover, several validation studies involving different pH values, water samples and instrumentation-techniques were performed in order to ensure the robustness of the method. For this purpose, the peak area was used as quantitative variable since it is not affected by the pH of the medium even if there is any modification of this parameter during the experiments. Furthermore, the effect of other drug such as trimethoprim on the analytical signal of sulfamethoxazole was also evaluated. Once the method was developed it was tested on the quality control of Soltrim®, obtaining recoveries between 98 and 102 %. Lastly, the voltammetric method was applied for the in situ monitoring of sulfamethoxazole's removal from water samples, specifically by anodic oxidation and electro-Fenton treatments. While the former was coupled to an adsorption process, the latter was carried out with different iron sources including commercial medicines that can be found in wastewater. The problem of significant variation in pH during the treatment was solved by working with the peak area, and so obtaining valid and reliable kinetic data. Although anodic oxidation proved to be faster considering the calculated kobs, electro-Fenton turned out to be more efficient in eliminating the drug, achieving the disappearance of its analytical signal in only 30 min of treatment.

Enhancement of aerobic denitrification process on antibiotics removal: Mechanism and efficiency: A review

Traditionally, the removal of nitrogenous pollutants from wastewater relied on conventional anaerobic denitrification as well as aerobic nitrification and anoxic denitrification. However, anaerobic denitrification is complicated since it requires stringent environmental conditions as well as a large land, therefore, denitrification and nitrification were performed in two separate reactors. Although high pollutant removal efficiency has been achieved via aerobic nitrification and anoxic denitrification, the demerits of this approach include high operational costs. Other traditional nitrogen removal methods include air stripping, reverse osmosis, adsorption, ion exchange, chemical precipitation, advanced oxidation process, and breakpoint chlorination. Traditional nitrogen removal methods are not only complicated but they are also uneconomical due to the high operational costs. Researchers have discovered that denitrification can be carried out by heterotrophic nitrification-aerobic denitrification (HNAD) microorganisms which remove nitrogen in a single aerobic reactor that does not require stringent operating conditions. Despite the significant effort that researchers have put in, there is still little information known about the mechanisms of antibiotic removal during HNAD. This review begins with an update on the current state of knowledge on the removal of nitrogenous pollutants and antibiotics from wastewater by HNAD. The mechanisms of antibiotic removal via HNAD were examined in detail. Followed by, the enhancement of antibiotics removal via co-metabolism and oxidation of sulfamethoxazole (SMX) as well as the response of microbial communities to antibiotic toxicity. Lastly, the conditions favorable for antibiotic biodegradation and mechanisms for nitrogen removal via HNAD were examined. The findings in this review show that co-metabolism and oxidation of SMX were the main antibiotic biodegradation mechanisms, pathways for antibiotic removal by co-metabolism and oxidation of SMX were also proposed in the discussion. This research indicated the potential of aerobic denitrification in the removal of antibiotics from wastewater. Understanding the mechanisms and pathways of antibiotic removal by HNAD helps wastewater engineers and researchers apply the technology more efficiently. PRACTITIONER POINTS: The mechanisms of antibiotic removal via HNAD were examined in detail. Co-metabolism and oxidation of SMX were the main antibiotic biodegradation mechanisms. Pathways for antibiotic removal by co-metabolism and oxidation of SMX were also proposed. Conditions favorable for antibiotic biodegradation were examined. This research indicated the potential of aerobic denitrification in the removal of antibiotics from wastewater.

Toxicological mechanisms and molecular impacts of tire particles and antibiotics on zebrafish

Tire microplastics (TMPs) and antibiotics are emerging pollutants that widely exist in water environments. The coexistence of these pollutants poses severe threats to aquatic organisms. However, the toxicity characteristics and key molecular factors of the combined exposure to TMPs in aquatic organisms remain unknown. Therefore, the joint toxicity of styrene-butadiene rubber TMPs (SBR-TMPs) and 32 antibiotics (macrolides, fluoroquinolones, β-lactams, sulfonamides, tetracyclines, nitroimidazoles, highly toxic antibiotics, high-content antibiotics, and common antibiotics) in zebrafish was investigated using a full factorial design, molecular docking, and molecular dynamics simulation. Sixty-four combinations of antibiotics were designed to investigate the hepatotoxicity of the coexistence of SBR-TMPs additives and antibiotics in zebrafish. Results indicated that low-order effects of antibiotics (e.g., enoxacin-lomefloxacin and ofloxacin-enoxacin-lomefloxacin) had relatively notable toxicity. The van der Waals interaction between additives and zebrafish cytochrome P450 enzymes primarily affected zebrafish hepatotoxicity. Zebrafish hepatotoxicity was also affected by the ability of SBR-TMPs to adsorb antibiotics, the relation between antibiotics, the affinity of antibiotics docking to zebrafish cytochrome P450 enzymes, electronegativity, atomic mass, and the hydrophobicity of the antibiotic molecules. This study aimed to eliminate the joint toxicity of TMPs and antibiotics and provide more environmentally friendly instructions for using different chemicals.

Occurrence and distribution of emerging contaminants in wastewater treatment plants: A globally review over the past two decades

Emerging contaminants are pervasive in aquatic environments globally, encompassing pharmaceuticals, personal care products, steroid hormones, phenols, biocides, disinfectants and various other compounds. Concentrations of these contaminants are detected ranging from ng/L to μg/L. Even at trace levels, these contaminants can pose significant risks to ecosystems and human health. This article systematically summarises and categorizes data on the concentrations of 54 common emerging contaminants found in the influent and effluent of wastewater treatment plants across various geographical regions: North America, Europe, Oceania, Africa, and Asia. It reviews the occurrence and distribution of these contaminants, providing spatial and causal analyses based on data from these regions. Notably, the maximum concentrations of the pollutants observed vary significantly across different regions. The data from Africa, in particular, show more frequent detection of pharmaceutical maxima in wastewater treatment plants.

Method development and optimization for dispersive liquid-liquid microextraction factors using the response surface methodology with desirability function for the ultra-high performance liquid chromatography quadrupole time of flight mass spectrometry determination of organic contaminants in water samples: risk and greenness assessment

A simple, cost effective, and efficient dispersive liquid-liquid microextraction method was developed and optimized for the determination of organic contaminants in different environmental water matrices followed by UHPLC-QTOF-MS analysis. In the preliminary experiments, the univariate optimization approach was used to select tetrachloroethylene and acetonitrile as extraction and disperser solvents, respectively. The significant factors influencing DLLME were screened using full factorial design, and the optimal values for each variable were then derived through further optimization using central composite design with desirability function. The optimal conditions were achieved with 195 μL of tetrachloroethylene as the extraction solvent, 1439 μL of acetonitrile as the disperser solvent, and a sample pH of 5.8. Under these conditions, the method provided detection limits ranging from 0.11-0.48 μg L-1 and recoveries ranging from 23.32-145.43% across all samples. The enrichment factors obtained ranged from 11.66-72.72. The proposed method was then successfully applied in real water samples. Only benzophenone was detected in the concentration range of 0.79-0.88 μg L-1 across all the water samples. The calculated risk quotient resulting from benzophenone exposure in water samples showed a low potential risk to human health and the aquatic ecosystem. The method was also evaluated for its environmental friendliness using various metrics tools such as Analytical Eco-Scale (AES), Green Analytical Procedure Index (GAPI), Analytical GREEnness (AGREE), Analytical Greenness for Sample Preparation (AGREEprep), and Sample Preparation Metric of Sustainability (SPMS). Only AES qualified the method as green while it was considered acceptable and sustainable when assessed using SPMS.

Long term study on the fate and environmental risks of favipiravir in wastewater treatment plants and comparison with COVID-19 cases

In recent years especially during COVID-19, the increased usage of antiviral drugs has led to increased interest in monitoring their presence in wastewater worldwide. In this study, it was examined the occurrence, fate and environmental risks of favipiravir which is used for COVID-19 treatment in two wastewater treatment plants (WWTPs) with different treatment processes in Istanbul, Turkey. Favipiravir was measured in WWTPs influent samples, effluent samples and sludge samples with maximum concentrations of 97 μg/L, 64.11 μg/L and 182.47 μg/g, respectively. Favipiravir had removal efficiency below 55 % for both WWTPs. Mass balance analysis showed that favipiravir removal in WWTPs mainly attributed to biodegradation/biotransformation. Statistical analysis revealed a significant correlation between favipiravir concentration and COVID-19 incidence in Istanbul. The microbial distribution analysis indicated that comparison of collected COVID-19 pandemic sludge and post-pandemic period sludge samples, a noteworthy reduction in the Chloroflexi and Actinobacteriota phyla at the phylum level was observed. Environmental risk assessment using risk quotients ranged from 168 to 704, indicating that the presence of this antiviral drug posed significant ecological risks to aquatic organisms. The study concluded that WWTPs were releasing antiviral drugs into the environment, thereby posing risks to both the aquatic ecosystem and public health. The results of this study demonstrate the persistence of favipiravir in WWTPs and offer crucial supporting data for further research into the advancement of wastewater treatment technology. Also, this study shows wastewater based monitoring is supplementary and early warning system for determining the occurrence of antiviral drugs.

Divergent effects of azithromycin on purple corn (Zea mays L.) cultivation: Impact on biomass and antioxidant compounds

The present study assessed the impact of using irrigation water contaminated with Azithromycin (AZM) residues on the biomass and antioxidant compounds of purple corn; for this purpose, the plants were cultivated under ambient conditions, and the substrate used consisted of soil free from AZM residues, mixed with compost in a ratio of 1:1 (v/v). The experiment was completely randomized with four replications, with treatments of 0, 1, 10, and 100 μg/L of AZM. The results indicate that the presence of AZM in irrigation water at doses of 1 and 10 μg/L increases the weight of dry aboveground biomass, while at an amount of 100 μg/L, it decreases. Likewise, this study reveals that by increasing the concentration of AZM from 1 to 10 μg/L, total polyphenols and monomeric anthocyanins double, in contrast, with an increase to 100 μg/L, these decrease by 44 and 53%, respectively. It has been demonstrated that purple corn exposed to the antibiotic AZM at low doses has a notable antioxidant function in terms of DPPH and ORAC. The content of flavonols, phenolic acids, and flavanols increases by 57, 28, and 83%, respectively, when the AZM concentration is from 1 to 10 μg/L. However, with an increase to 100 μg/L, these compounds decrease by 17, 40, and 42%, respectively. On the other hand, stem length, root length, and dry weight of root biomass are not significantly affected by the presence of AZM in irrigation water.

Co-exposure to boscalid and amoxicillin inhibited the degradation of boscalid and aggravated the threat to the earthworm

The extensive application of pesticides and antibiotics in agricultural production makes it possible for them to coexist in farmland, and the interaction of the two pollutants can lead to changes in environmental behavior and toxicity, creating uncertainty risks to soil and soil organisms. In this study, we explored the environmental behavior and the effects of earthworms under co-exposure to amoxicillin and boscalid and further explored the accumulation and toxic effects on earthworms. The results showed that amoxicillin increased the adsorption of boscalid in soil and inhibited its degradation. In addition, we noticed that the co-exposure of amoxicillin and boscalid caused intestinal barrier damage, which increased the bioaccumulation of earthworms for boscalid and led to more severe oxidative stress and metabolic disorders in earthworms. In summary, our findings indicate that amoxicillin can increase the ecological risk of boscalid in the environment and imply that the encounter between antibiotics and pesticides in the environment can amplify the toxic effects of pesticides, which provides new insights into the ecological risks of antibiotics.

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs)

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

A facile fluorescence method for the effective detection of ampicillin using antioxidant carbon dots with specific fluorescent response to ˙OH

Monitoring methods for beta-lactam (β-lactam) antibiotics, especially for ampicillin (AMP), with simple operation and sensitivity for realtime applications are highly required. To address this need, antioxidant carbon dots (E-CDs) with excellent fluorescence properties were synthesized using citric acid and ethylenediamine as raw materials. With a quantum yield of 81.97%, E-CDs exhibited a specific and sensitive response to ˙OH. The quenched fluorescence of E-CDs by the formed ˙OH could be restored through a competition reaction with AMP. Leveraging the signal-quenching strategy of E-CDs, H2O2, and Fe2+, a fluorescence signal-on strategy was developed using AMP as the fluorescence recovery agent for the sensitive detection of AMP. The mechanism of the quenching of E-CDs by ˙OH was attributed to the damaging effect of ˙OH on E-CDs. Under optimal conditions, the detection limit of this method for AMP was determined to be 0.38 μg mL-1. This method was successful in drug quality control and the spiked detection of AMP in lake water, milk, and sea cucumber, presenting a viable option for convenient and rapid antibiotic monitoring methods.

Environmental health science research: opportunities and challenges for some developing countries in Africa

Due to ongoing developmental projects, there is a need for regular monitoring of the impact of pollutants on the environment. This review documented the challenges and opportunities in the field of environmental health sciences in some African countries. A systematic review was used to investigate opportunities and challenges in the field of environmental health science in Africa by examining published work with a specific focus on Africa. The reports showed that funding and infrastructure as the major problems. The study also highlighted recruiting study participants, retention, and compensation as a bane in the field in Africa. The absence of modern equipment also hinders research. The review, however, noted research collaboration from the region including studies on emerging pollutants such as pharmaceuticals, per and polyfluoroalkyl substances (PFAS), and microplastic (MPs) as great opportunities. The study concluded that collaboration with other continents, exchange programs and improved governmental interventions may help.

Contaminants of Emerging Concern: Antibiotics Research in Mussels from the Coasts of the Tyrrhenian Sea (Sardinia, Italy)

Contaminants of emerging concern (CECs) are compounds found in several environmental compartments whose ubiquitous presence can cause toxicity for the entire ecosystem. Several personal care products, including antibiotics, have entered this group of compounds, constituting a major global threat. It is essential to develop simple and reliable methods by which to quantify these contaminants in several matrices. In this work, mussels were chosen as sentinel organisms to assess environmental pollution and the safety of bivalve mollusk consumption according to the "One Health perspective". A liquid chromatographic tandem mass spectrometry method (LC-MS/MS) was developed for the quantification of two macrolides, erythromycin (ERY) and azithromycin (AZI), in mussels. This new method was validated according to international guidelines, showing high selectivity, good recoveries (>60% for both of them), sensitivity, and precision. The method was successfully applied for ERY and AZI research in mussels farmed along the Sardinian coasts (Italy), demonstrating itself to be useful for routine analysis by competent authorities. The tested macrolides were not determined in the analyzed sites at concentrations above the limits of detection (LODs). These results demonstrate the food safety of mussels (as concerns the studied antibiotics) and a negligible amount of pollution derived from these drugs in the studied area.

Environmental fate of aquatic pollutants and their mitigation by phycoremediation for the clean and sustainable environment: A review

Emerging pollutants such as natural and manufactured chemicals, insecticides, pesticides, surfactants, and other biological agents such as personal care products, cosmetics, pharmaceuticals, and many industrial discharges hamper the aquatic environment. Nanomaterials and microplastics, among the categories of pollutants, can directly interfere with the marine ecosystem and translate into deleterious effects for humans and animals. They are either uncontrolled or poorly governed. Due to their known or suspected effects on human and environmental health, some chemicals are currently causing concern. The aquatic ecology is at risk from these toxins, which have spread worldwide. This review assesses the prevalence of emerging and hazardous pollutants that have effects on aquatic ecosystems and contaminated water bodies and their toxicity to non-target organisms. Microalgae are found to be a suitable source to remediate the above-mentioned risks. Microalgae based mitigation techniques are currently emerging approaches for all such contaminants, including the other categories that are discussed above. These studies describe the mechanism of phycoremediation, provide outrage factors that may significantly affect the efficiency of contaminants removal, and discuss the future directions and challenges of microalgal mediated remediations.