Trace organic contaminants in biosolids: Impact of conventional wastewater and sludge processing technologies and emerging alternatives

Enhanced chemotaxis and degradation of nonylphenol in Pseudoxanthomonas mexicana via CRISPR-mediated receptor modification

In this study, a novel nonylphenol (NP)-degrading bacterium, Pseudoxanthomonas mexicana CH, was isolated from wastewater treatment plant effluent. Phylogenetic analysis showed its close relationship to P. mexicana AMX 26BT. The strain displayed chemotaxis toward NP, with Mcp24 as the key chemoreceptor. The Mcp24 deletion mutant (CH- 1) had weaker chemotaxis and NP degradation (over 30% lower in solution and 8% lower in sludge than the wild type). In vitro, Mcp15's C-terminal pentapeptide DWQEF was methylated by CheR. Using CRISPR, this pentapeptide was added to Mcp24 to create CH- 2. CH- 2 showed better NP chemotaxis (17% higher in plate assays and 39% higher in capillary assays) and higher NP degradation rates (23.5% and 24.2% higher in solution and sludge, respectively). These findings demonstrate that NP acts as a bacterial chemoattractant, with Mcp24 as the receptor. Enhancing Mcp24's C-terminal pentapeptide improves chemotaxis and degradation efficiency, representing a significant advancement in bioremediation by strengthening bacterial responses to pollutants.

Prioritization of biosolids-borne unregulated organic compounds

The land application of biosolids offers benefits over landfilling and incineration by improving soil health and plant nutrition. Unregulated Organic Compounds (UOCs) in biosolids have led to concerns that may impede the beneficial use of biosolids. This study presents a prioritization scheme to identify the highest-priority biosolids-borne UOCs that risk human health. A database of 906 identified chemicals in US biosolids was developed. The primary filtering process based on the class of chemicals further reduced the number of chemicals to 460. Based on the availability of quantifiable UOCs concentrations in biosolids, the number of UOCs was reduced to 298. A criterion of the highest measured biosolids chemical concentration to toxicity (rat LD50) ratio of <0.001 was further used to reduce the final list to 124 UOCs. A scoring scheme was developed that included occurrence, mobility, persistence, bioaccumulation, and toxicity. Results were used to understand the fate of chemicals in soil and their potential effect on human health. The final assessment was based on the sum of five scenarios by adding scores of two or more of the parameters. Forty-six high priority and 78 low priority UOCs were identified after the final scoring evaluation. This study prioritizes UOCs based on exposure, fate, and potential hazards in soil amended with biosolids and recommends further investigation of high priority UOCs.

Bacterial bioaugmentation for paracetamol removal from water and sewage sludge. Genomic approaches to elucidate biodegradation pathway

Wastewater treatment plants (WWTPs) are recognized as significant contributors of paracetamol (APAP) into the environment due to their limited ability to degrade it. This study used a bioaugmentation strategy with Pseudomonas extremaustralis CSW01 and Stutzerimonas stutzeri CSW02 to achieve APAP biodegradation in solution in wide ranges of temperature (10-40 °C) and pH (5-9), reaching DT50 values < 1.5 h to degrade 500 mg L-1 APAP. Bacterial strains also mineralized APAP in solution (<30 %), but when forming consortia with Mycolicibacterium aubagnense HPB1.1, mineralization significantly increased (up to 74 % and 58 % for CSW01 +HPB1.1 and CSW02 +HPB1.1, respectively), decreasing DT50 values to only 1 and 9 days. Despite the complete degradation of APAP and its high mineralization, residual toxicity throughout the process was observed. Three APAP metabolites were identified (4-aminophenol, hydroquinone and trans-2-hexenoic acid) that quickly disappeared, but residual toxicity remained, indicating the presence of other non-detected intermediates. CSW01 and CSW02 degraded also 100 % APAP (50 mg kg-1) adsorbed on sewage sludge, with DT50 values of only 0.7 and 0.3 days, respectively, but < 15 % APAP was mineralized. A genome-based analysis of CSW01 and CSW02 revealed that amidases, deaminases, hydroxylases, and dioxygenases enzymes were involved in APAP biodegradation, and a possible metabolic pathway was proposed.

Occurrence of 40 sanitary indicators in French digestates derived from different anaerobic digestion processes and raw organic wastes from agricultural and urban origin

This study investigated the sanitary quality of digestates resulting from the mesophilic anaerobic digestion (AD) of urban and agricultural organic wastes (OWs). 40 sanitary indicators, including pathogenic bacteria, antimicrobial resistance genes, virulence factor genes, and mobile genetic elements were evaluated using real-time PCR and/or droplet digital PCR. 13 polycyclic aromatic hydrocarbons (PAHs) and 13 pharmaceutical products (PHPs) were also measured. We assessed agricultural OWs from three treatment plants to study the effect of different AD processes (feeding mode, number of stages, pH), and used three laboratory-scale reactors to study the effect of different feed-supplies (inputs). The lab-scale reactors included: Lab1 fed with 97% activated sludge (urban waste) and 3% cow manure; Lab2 fed with 85% sludge-manure mixture supplemented with 15% wheat straw (WS); and Lab3 fed with 81% sludge-manure mixture, 15% WS, and 4% zeolite powder. Activated sludge favored the survival of the food-borne pathogens Clostridium perfringens and Bacillus cereus, carrying the toxin-encoding genes cpe and ces, respectively. Globally, the reactors fed with fecal matter supplemented with straw (Lab2) or with straw and zeolite (Lab3) had a higher hygienization efficiency than the reactor fed uniquely with fecal matter (Lab1). Three pathogenic bacteria (Enterococcus faecalis, Enterococcus faecium, and Mycobacterium tuberculosis complex), a beta-lactam resistance gene (bla TEM), and three mobile genetic elements (intI1, intI2, and IS26) were significantly decreased in Lab2 and Lab3. Moreover, the concentrations of 11 PAHs and 11 PHPs were significantly lower in Lab2 and Lab3 samples than in Lab1 samples. The high concentrations of micropollutants, such as triclosan, found in Lab1, could explain the lower hygienization efficiency of this reactor. Furthermore, the batch-fed reactor had a more efficient hygienization effect than the semi-continuous reactors, with complete removal of the ybtA gene, which is involved in the production of the siderophore yersiniabactin, and significant reduction of intI2 and tetO. These data suggest that it is essential to control the level of chemical pollutants in raw OWs to optimize the sanitary quality of digestates, and that adding co-substrate, such as WS, may overcome the harmful effect of pollutants.

Meta-Analysis and Machine Learning Models for Anaerobic Biodegradation Rates of Organic Contaminants in Sediments and Sludge

Anaerobic biodegradation rates (half-lives) of organic chemicals are pivotal for environmental risk assessment and remediation. Traditional experimental evaluation, constrained by prolonged, oxygen-free conditions, struggles to keep pace with emerging contaminants. Data-driven machine learning (ML) models serve as promising complements. However, reported quantitative structure-biodegradation relationships or ML models on anaerobic biodegradation are mostly based on small data sets (<100 records) and neglect experimental conditions, usually achieving compromised predictions. This work aimed to develop ML models for predicting the biodegradation half-lives of organic pollutants in anaerobic environments (i.e., sediment/soil and sludge). Focusing on important features of both chemicals and experimental conditions, we first curated two data sets, one for sediment/soil (SED) and the other for sludge (SLD), covering 978 records for 206 chemicals from the literature, and then conducted a meta-analysis. Next, we built a binary classification (half-life of 30 days as the cutoff) model with an accuracy of 81% and a regression model with R2 of 0.56 for SED based on LightGBM (80% and 0.31 for SLD based on Extra tree, respectively). The model interpretations underscored the significance of experimental conditions (e.g., temperature and inoculum dosage), as evidenced by their high feature importance, and the models were found to correctly capture the effects of chemical substructures, for example, branched structures and aromatic rings prolonged half-lives while methyl group and ortho-substitution on rings shortened half-lives. The applicability domains of the models were also defined, resulting in reasonable prediction for the half-lives of 41% (SED) or 67% (SLD) of over 4000 persistent, bioaccumulative, and toxic chemicals. Overall, this study pioneers ML models for predicting the anaerobic degradation half-lives, offering valuable support for future evaluation and implementation of chemical anaerobic biodegradation.

Deciphering the role of extracellular polymeric substances in the adsorption and biotransformation of organic micropollutants during anaerobic wastewater treatment

Extracellular polymeric substances (EPS) participate in the removal of organic micropollutants (OMPs), but the primary pathways of removal and detailed mechanisms remain elusive. We evaluated the effect of EPS on removal for 16 distinct chemical classes of OMPs during anaerobic digestion (AD). The results showed that hydrophobic OMPs (HBOMPs) could not be removed by EPS, while hydrophilic OMPs (HLOMPs) were amenable to removal via adsorption and biotransformation of EPS. The adsorption and biotransformation of HLOMPs by EPS accounted up to 19.4 ± 0.9 % and 6.0 ± 0.8 % of total removal, respectively. Further investigations into the adsorption and biotransformation mechanisms of HLOMPs by EPS were conducted utilizing spectral, molecular dynamics simulation, and electrochemical analysis. The results suggested that EPS provided abundant binding sites for the adsorption of HLOMPs. The binding of HLOMPs to tryptophan-like proteins in EPS formed nonfluorescent complexes. Hydrogen bonds, hydrophobic interactions and water bridges were key to the binding processes and helped stabilize the complexes. The biotransformation of HLOMPs by EPS may be attributed to the presence of extracellular redox active components (c-type cytochromes (c-Cyts), c-Cyts-bound flavins). This study enhanced the comprehension for the role of EPS on the OMPs removal in anaerobic wastewater treatment.

Quantitative Non-targeted Screening to Profile Micropollutants in Sewage Sludge Used for Agricultural Field Amendments

A considerable number of micropollutants from human activities enter the wastewater network for removal. However, at the wastewater treatment plant (WWTP), some proportion of these compounds is retained in the sewage sludge (biosolids), and due to its high content of nutrients, sludge is widely applied as an agricultural fertilizer and becomes a means for the micropollutants to be introduced to the environment. Accordingly, a holistic semiquantitative nontarget screening was performed on sewage sludges from five different WWTPs using nanoflow liquid chromatography coupled to high-resolution Orbitrap mass spectrometry. Sixty-one inorganic elements were measured using inductively coupled plasma mass spectrometry. Across all sludges, the nontarget analysis workflow annotated >21,000 features with chemical structures, and after strict prioritization and filtering, 120 organic micropollutants with diverse chemical structures and applications such as pharmaceuticals, pesticides, flame retardants, and industrial and natural compounds were identified. None of the tested sludges were free from organic micropollutants. Pharmaceuticals contributed the largest share followed by pesticides and natural products. The predicted concentration of identified contaminants ranged between 0.2 and 10,881 ng/g dry matter. Through quantitative nontarget analysis, this study comprehensively demonstrated the occurrence of cocktails of micropollutants in sewage sludges.

Occurrence, spatiotemporal trends, fate, and treatment technologies for microplastics and organic contaminants in biosolids: A review

This review provides a comprehensive overview of the occurrence, fate, treatment and multi-criteria analysis of microplastics (MPs) and organic contaminants (OCs) in biosolids. A meta-analysis was complementarily analysed through the literature to map out the occurrence and fate of MPs and 10 different groups of OCs. The data demonstrate that MPs (54.7% occurrence rate) and linear alkylbenzene sulfonate surfactants (44.2% occurrence rate) account for the highest prevalence of contaminants in biosolids. In turn, dioxin, polychlorinated biphenyls (PCBs) and phosphorus flame retardants (PFRs) have the lowest rates (<0.01%). The occurrence of several OCs (e.g., dioxin, per- and polyfluoroalkyl substances, polycyclic aromatic hydrocarbons, pharmaceutical and personal care products, ultraviolet filters, phosphate flame retardants) in Europe appear at higher rates than in Asia and the Americas. However, MP concentrations in biosolids from Australia are reported to be 10 times higher than in America and Europe, which required more measurement data for in-depth analysis. Amongst the OC groups, brominated flame retardants exhibited exceptional sorption to biosolids with partitioning coefficients (log Kd) higher than 4. To remove these contaminants from biosolids, a wide range of technologies have been developed. Our multicriteria analysis shows that anaerobic digestion is the most mature and practical. Thermal treatment is a viable option; however, it still requires additional improvements in infrastructure, legislation, and public acceptance.

Quantitative structure-biotransformation relationships of organic micropollutants in aerobic and anaerobic wastewater treatments

Biotransformation is one of the dominant processes to remove organic micropollutants (OMPs) in wastewater treatment. However, studies on the role of molecular structure in determining the biotransformation rates of OMPs are limited. We evaluated the biotransformation of 14 OMPs belonging to different chemical classes under aerobic and anaerobic conditions, and then explored the quantitative structure-biotransformation relationships (QSBRs) of the OMPs based on biotransformation rates using valid molecular structure descriptors (electrical and physicochemical parameters). Pseudo-first-order kinetic modeling was used to fit the biotransformation rate, and only 2 of the 14 OMPs showed that the biotransformation rate constant (kbio) values were higher under anaerobic conditions than aerobic conditions, indicating that aerobic conditions were more favorable for biotransformation of most OMPs. QSBRs infer that the electrophilicity index (ω) is a reliable predictor for OMPs biotransformation under aerobic conditions. ω corresponds to the interaction between OMPs and microbial enzyme active sites, this process is the rate-limiting step of biotransformation. However, under anaerobic conditions the QSBR based on ω was not significant, indicating that specific functional groups may be more critical than electrophilicity. In conclusion, QSBRs can serve as alternative tools for the prediction of the biotransformation of OMPs and provide further insights into the factors that influence biotransformation.

Tracing COVID-19 drugs in the environment: Are we focusing on the right environmental compartment?

The Coronavirus Disease 2019 (COVID-19) pandemic led to over 770 million confirmed cases, straining public healthcare systems and necessitating extensive and prolonged use of synthetic chemical drugs around the globe for medical treatment and symptom relief. Concerns have arisen regarding the massive release of active pharmaceutical ingredients (APIs) and their metabolites into the environment, particularly through domestic sewage. While discussions surrounding this issue have primarily centered on their discharge into aquatic environments, particularly through treated effluent from municipal wastewater treatment plants (WWTPs), one often overlooked aspect is the terrestrial environment as a significant receptor of pharmaceutical-laden waste. This occurs through the disposal of sewage sludge, for instance, by applying biosolids to land or non-compliant disposal of sewage sludge, in addition to the routine disposal of expired and unused medications in municipal solid wastes. In this article, we surveyed sixteen approved pharmaceuticals for treating COVID-19 and bacterial co-infections, along with their primary metabolites. For this, we delved into their physiochemical properties, ecological toxicities, environmental persistence, and fate within municipal WWTPs. Emphasis was given on lipophilic substances with log Kow >3.0, which are more likely to be found in sewage sludge at significant factions (25.2%-75.0%) of their inputs in raw sewage and subsequently enter the terrestrial environment through land application of biosolids, e.g., 43% in the United States and as high as 96% in Ireland or non-compliant practices of sewage sludge disposal in developing communities, such as open dumping and land application without prior anaerobic digestion. The available evidence underscores the importance of adequately treating and disposing of sewage sludge before its final disposal or land application in an epidemic or pandemic scenario, as mismanaged sewage sludge could be a significant vector for releasing pharmaceutical compounds and their metabolites into the terrestrial environment.

Design strategies and mechanisms of g-C3N4-based photoanodes for photoelectrocatalytic degradation of organic pollutants in water

Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.

Occurrence of emerging contaminants in biosolids in northern Queensland, Australia

This study aims to identify and quantify different classes of emerging contaminants (ECs), such as pharmaceutical and personal care products (PPCPs), per-and polyfluoroalkyl substances (PFAS), heavy metals (HMs), polycyclic musks (PMs) in biosolids from different sewage treatment plants (STPs) from regional councils across Northern Queensland, Australia. Biosolids samples were named BS1 to BS7 for each council. The results revealed significant variations in the concentrations of different ECs in biosolids which could be explained in some instances by the characteristics of the upstream sewage network. For instance, BS4-biosolids from a small agricultural shire (largely sugarcane) showed the highest concentration of zinc and copper, which were 2430 and 1050 mg/kg, respectively. Among PPCPs, the concentration of ciprofloxacin was found to be the highest in BS3 and BS5, two large regional council areas which are a mix of domestic and industrial (predominantly domestic) biosolids of 1010 and 1590 ng/g, respectively. In addition, the quantity of sertraline was consistently high in all biosolids except from BS7, one of the smaller regional councils, which is indicative of the domestic catchments attached. PFAS compounds were detected in all biosolids samples except in BS6, one of the small (agricultural and tourist) catchments. Two PFAS compounds emerged as the most common pollutants that were perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS). The largest industrial catchment biosolids, BS2 showed the highest concentration of PFOS at 253 ng/g, while the smallest regional council, BS7 showed the maximum concentration of 7.90 ng/g of PFOA. Overall, this study concludes that certain ECs such as HMs, antibiotics, PFOS and PFOA in biosolids may pose high environmental risks.

Occurrence and the potential ecological risk of veterinary antimicrobials in swine farm wastewaters in Japan: Seasonal changes, relation to purchased quantity and after termination of oxytetracycline usage

This study provides the first comprehensive investigation of the residual concentrations of eight classes of antimicrobial agents (AMs, 20 compounds) in 13 swine wastewater treatment facilities in Japan. These facilities implemented the aerobic activated sludge (AS) or its alternative methods. The maximum concentrations before treatment were found at the level of 7100, 6900, 6000, 3600, 3400, and 1400 µg/L for tilmicosin, oxytetracycline (OTC), chlortetracycline, lincomycin , sulfamethoxazole, and trimethoprim, respectively. The highest detection rate (96.3%) in influents was noted for the morantel, which was a feed additive. The seasonal difference in residual concentration was much greater for tetracyclines (TCs) and macrolides (MLs) when their residual concentrations were high, especially in the cold season. There was a positive correlation between the purchased quantity of TCs and fluoroquinolones (FQs) and their residue levels detected in the effluents (p < 0.01). The estimated removal rate of AMs was greater than 80%. In contrast, on a few occasions, it was diminished due to failing operating conditions, such as water temperature and AS rate in the aeration tank. The estimated ecological risks of AMs in effluents based on risk quotients (RQs) considered to enhance the selection pressure for drug resistance (RQs-AMR) were high for TCs and FQs, whereas ecotoxicological effects (RQs-ENV) to aquatic organisms were higher for sulfonamides and MLs. When OTC usage ceased, its concentration in wastewater decreased rapidly; however, it remained longer period in the effluents, probably due to OTC desorption from the AS. The concentrations (and respective RQs) of TCs were decreased by >99.8% and >92% in the influents and effluents, respectively. This data suggested that it is essential to reduce the amount used and introduce more efficient methods and operating conditions to constantly remove AMs during the treatment to reduce the risk of AM discharge from swine farms.

Novel nonylphenol-degrading bacterial strains isolated from sewage sludge: Application in bioremediation of sludge

Nonylphenol (NP) is an anthropogenic pollutant frequently found in sewage sludge due to the insufficient degrading effectiveness of conventional WWTPs and has attracted attention as an endocrine disruptor. The aim of this study was to isolate specific NP-degrading bacteria from sewage sludge to be used in the degradation of this contaminant through bioaugmentation processes in aqueous solution and sewage sludge. Up to eight different bacterial strains were isolated, six of them not previously described as NP degraders. Bacillus safensis CN12 presented the best NP degradation in solution, and glucose used as an external carbon source increased its effect, reaching DT₅₀ degradation values (time to decline to half the initial concentration of the pollutant) of only 0.9 days and a complete degradation in <7 days. Four NP metabolites were identified throughout the biodegradation process, showing higher toxicity than the parent contaminant. In sewage sludge suspensions, the endogenous microbiota was capable of partially degrading NP, but a part remained adsorbed as bound residue. Bioaugmentation was used for the first time to remove NP from sewage sludge to obtain more environmentally friendly biosolids. However, B. safensis CN12 was not able to degrade NP due to its high adsorption on sludge, but the use of a cyclodextrin (HPBCD) as availability enhancer allowed us to extract NP and degrade it in solution. The addition of glucose as an external carbon source gave the best results since the metabolism of the sludge microbiota was activated, and HPBCD was able to remove NP from sewage sludge to the solution to be degraded by B. safensis CN12. These results indicate that B. safensis CN12 can be used to degrade NP in water and sewage sludge, but the method must be improved using consortia of B. safensis CN12 with other bacterial strains able to degrade the toxic metabolites produced.

From Sewage Sludge to the Soil-Transfer of Pharmaceuticals: A Review

Sewage sludge, produced in the process of wastewater treatment and managed for agriculture, poses the risk of disseminating all the pollutants contained in it. It is tested for heavy metals or parasites, but the concentration of pharmaceuticals in the sludge is not controlled. The presence of these micropollutants in sludge is proven and there is no doubt about their negative impact on the environment. The fate of these micropollutants in the soil is a new and important issue that needs to be known to finally assess the safety of the agricultural use of sewage sludge. The article will discuss issues related to the presence of pharmaceuticals in sewage sludge and their physicochemical properties. The changes that pharmaceuticals undergo have a significant impact on living organisms. This is important for the implementation of a circular economy, which fits perfectly into the agricultural use of stabilized sewage sludge. Research should be undertaken that clearly shows that there is no risk from pharmaceuticals or vice versa: they contribute to the strict definition of maximum allowable concentrations in sludge, which will become an additional criterion in the legislation on municipal sewage sludge.

A review on the removal of phthalate acid esters in wastewater treatment plants: from the conventional wastewater treatment to combined processes

In the past decades, phthalate acid esters (PAEs), as a new class of recalcitrant environmental contaminant, have attracted increasing concern due to their potential hazards to reproductive system. wastewater treatment plants (WWTPs) are generally regarded as a crucial barrier to prevent a variety of contaminants from introducing into aquatic environment. This paper reviews the occurrence, fate, and removal efficacy of six widely appearing PAEs in conventional wastewater treatment. PAEs removal appears to be compound- and process-dependent. Advanced treatment processes, including activated carbon, advanced oxidation process (AOPs), membrane filtration, and membrane bioreactor, show good performance in PAEs elimination, but many methods have been commercially limited by toxic byproducts, high operation, and maintenance costs. Even though combined processes are qualified as a promising alternative, further studies are required to optimize these processes, especially the competitiveness between technique and economy.

Chiral Inversion of 2-Arylpropionic Acid Enantiomers under Anaerobic Conditions

This work examined the chiral inversion of 2-arylpropionic acids (2-APAs) under anaerobic conditions and the associated microbial community. The anaerobic condition was simulated by two identical anaerobic digesters. Each digester was fed with the substrate containing 11 either pure (R)- or pure (S)-2-APA enantiomers. Chiral inversion was evidenced by the concentration increase of the other enantiomer in the digestate and the changes in the enantiomeric fraction between the two enantiomers. Both digesters showed similar and poor removal of 2-APAs (≤30%, except for naproxen) and diverse chiral inversion behaviors under anaerobic conditions. Four compounds exhibited (S → R) unidirectional inversion [flurbiprofen, ketoprofen, naproxen, and 2-(4-tert-butylphenyl)propionic acid], and the remaining seven compounds showed bidirectional inversion. Several aerobic and facultative anaerobic bacterial genera (Candidatus Microthrix, Rhodococcus, Mycobacterium, Gordonia, and Sphingobium) were identified in both digesters and predicted to harbor the 2-arylpropionyl-CoA epimerase (enzyme involved in chiral inversion) encoding gene. These genera presented at low abundances, <0.5% in the digester dosed with (R)-2-APAs and <0.2% in the digester dosed with (S)-2-APAs. The low abundances of these genera explain the limited extent of chiral inversion observed in this study.

Pivotal role of municipal wastewater resource recovery facilities in urban agriculture: A review

Urban agriculture provides a promising, comprehensive solution to water, energy, and food scarcity challenges resulting from the population growth, urbanization, and the accelerating effects of anthropogenic climate change. Their close access to consumers, profitable business models, and important roles in educational, social, and physical entertainment benefit both developing and developed nations. In this sense, Urban Water Resource Reclamation Facilities (WRRFs) can play a pivotal role in the sustainable implementation of urban agriculture. Reclaimed water as a recovered resource has less supply variability and in certain cases can be of higher quality than other water sources used in agriculture. Another recovered resource, namely, biosolids, as byproduct from wastewater treatment can be put to beneficial use as fertilizers, soil amendments, and construction material additives. The renewable electricity, heat, CO2, and bioplastics produced from WRRFs can also serve as essential resources in support of urban agriculture operation with enhanced sustainability. In short, this review exhibits a holistic picture of the state-of-the-art of urban agriculture in which WRRFs can potentially play a pivotal role. PRACTITIONER POINTS: Reclaimed water can be of higher quality than other sources used in urban agriculture. Biosolids can be put to beneficial use as fertilizers, soil amendments, and construction material additives. The renewable electricity, heat, CO2, and bioplastics produced can also serve as essential resources in support of urban agriculture.

The Influence of Municipal Wastewater Treatment Technologies on the Biological Stabilization of Sewage Sludge: A Systematic Review

Various wastewater treatment technologies are available today and biological processes are predominantly used in these technologies. Increasing wastewater treatment systems produces large amounts of sewage sludge with variable quantities and qualities, which must be properly managed. Anaerobic and aerobic digestion and composting are major strategies to treat this sludge. The main indicators of biological stabilization are volatile fatty acids (VFAs), volatile solids (VS), the carbon/nitrogen (C/N) ratio, humic substances (HS), the total organic carbon (TOC), the carbon dioxide (CO2) evolution rate, the specific oxygen uptake rate (SOUR), and the Dewar test; however, different criteria exist for the same indicators. Although there is no consensus for defining the stability of sewage sludge (biosolids) in the research and regulations reviewed, controlling the biological degradation, vector attraction, and odor determines the biological stabilization of sewage sludge. Because pollutants and pathogens are not completely removed in biological stabilization processes, further treatments to improve the quality of biosolids and to ensure their safe use should be explored.

Evaluation of the Use of Sewage Sludge Biochar as a Soil Amendment—A Review

In recent decades, minimization and recycling/reuse policies were introduced to reduce the quantities of generated waste and for alternative waste recovery. Organic wastes represent 46% of total global solid waste. Possible uses of organic wastes include using it as fertilizer and amendment for soil, for energy recovery and for the production of chemical substances. Sewage sludge disposal and reuse are identified as future problems concerning waste. The total amount of sludge generated in the entire world has increased dramatically, and this tendency is expected to increase significantly in the years to come. In most developed countries, special attention is given to sewage sludge treatment in order to improve the quality and safety of using it on the ground surface. Sewage sludge pyrolysis is considered an acceptable method, from an economic and ecological perspective, for the beneficial reuse of sewage sludge. This method has many advantages because, during the pyrolysis process, the sludge volume is reduced by 80%, pathogenic agents and hazardous compounds from sewage sludge are eliminated, metals are immobilized in solid residue and organic and inorganic fractions are immobilized in a stabilized form of pyrolytic residues (biochar). The biochar generated by sewage sludge pyrolysis does not contain pathogenic agents and is rich in carbon and nutrients.

Assessment of leachable and persistent dissolved organic carbon in sludges and biosolids from municipal wastewater treatment plants

Environmental regulation of organic pollutants has not kept pace with the growth in the number and diversity of legacy and emerging organic substances now in use. Simpler and cheaper tools and methodologies are needed to quickly assess the organic pollutant risks in waste materials applied to land such as municipal wastewater treatment sludges and biosolids. This study attempts to provide these, using an approach that consists of chemical leaching and analysis of dissolved organic carbon and determination of its biodegradability by measuring persistent dissolved organic carbon. Primary and secondary sludges, dewatered sludge cake, and anaerobically and thermally treated biosolids obtained from various types of municipal wastewater treatment plants were used in the study. The study found little variability in the levels of dissolved organic carbon leached from primary sludges obtained from different municipal wastewater treatment plants but found significant differences for secondary sludges based on levels of nitrification at the municipal wastewater treatment plants. As predicted treated biosolids leached less dissolved organic carbon than untreated dry sludges but had relatively higher proportions of persistent or poorly biodegradable dissolved organic carbon. Across all tested sludges and biosolids persistent dissolved organic carbon ranged from 14 to 39%, with biosolids that have undergone anaerobic digestion and thermal treatment more likely to contain greater relative proportion of persistent dissolved organic carbon than untreated sludges. The approach presented in this study will be useful in assessing the effectiveness of current and widely employed sludge treatment methods in reducing persistent organic pollutants in biosolids disposed on land.

Assessment of the occurrence of 455 pharmaceutical compounds in sludge according to their physical and chemical properties: A review

Sludge agronomical reuse is of major interest due to the beneficial contribution of nutrients. However, it implies the introduction of unregulated pharmaceuticals into amended-soils and creates a controversial issue about sludge management. To limit their dissemination, it is essential to identify the compounds of interest and understand their attenuation mechanisms through the sludge processes. This paper summarizes the knowledge on 455 investigated pharmaceuticals among 32 therapeutical categories in amendable sludge matrices. It contributes to enlarging the list of commonly quantified compounds to 305 residues including 84 additional compounds compared to previous reviews. It highlights that sorption appears as the main mechanism controlling the occurrence of pharmaceuticals in sludge matrices and shows the considerable residual levels of pharmaceuticals reaching several mg/kg in dry weight. Antibiotics, stimulants, and antidepressants show the highest concentrations up to 232 mg/kg, while diuretics, anti-anxieties or anticoagulants present the lowest concentrations reaching up to 686 µg/kg. Collected data show the increase in investigated compounds as antifungals or antihistamines, and underline emerging categories like antidiabetics, antivirals, or antiarrhythmics. The in-depth analysis of the substantial database guides onto the pharmaceuticals that are the most likely to occur in these amendable matrices to assist future research.

Effect of composting and amendment with biochar and woodchips on the fate and leachability of pharmaceuticals in biosolids destined for land application

Land application of biosolids can improve soil fertility and enhance crop production. However, the occurrence and persistence of pharmaceutical compounds in the biosolids may result in leaching of these contaminants to surface water and groundwater, causing environmental contamination. This study evaluated the effectiveness of two organic amendments [biochar (BC) and woodchips (WC)] for reducing the concentration and leachability (mobility) of four pharmaceuticals in biosolids derived from wastewater treatment plants in southern Ontario, Canada. The effect of 360-d composting on fate and leachabilities of target pharmaceuticals in biosolid mixtures was also investigated. Composting decreased total and leachable concentrations of pharmaceuticals in unamended and BC- and WC-amended biosolids to various degrees, from 10% up to 99% depending on the compound. Blending BC or WC into the biosolids greatly increased the removal rates of the target pharmaceuticals, while simultaneously decreasing their half-lives (t_0.5), compared to unamended biosolids. The t_0.5 of contaminants in this study followed the order: carbamazepine (304-3053 d) > gemfibrozil (42.3-92.4 d) > naproxen (15.3-104 d) > ibuprofen (12.5-19.0 d). Amendment with BC and(or) WC significantly reduced the leachability of carbamazepine, ibuprofen, and gemfibrozil to variable extents, but significantly enhanced the leachability of naproxen, compared to unamended biosolids (P < 0.05). Biochar and WC exhibited different (positive or negative) effects on the leachability of individual pharmaceuticals. Significantly lower concentrations of total and(or) leachable (mobile) pharmaceuticals were observed in amended biosolids than unamended biosolids (P < 0.05). Biochar and WC are effective amendments that can reduce the environmental impact of biosolid land applications with respect to pharmaceutical contamination.

Responses of anaerobic digestion of waste activated sludge to long-term stress of benzalkonium chlorides: Insights to extracellular polymeric substances and microbial communities

Quaternary ammonium compounds have gained widespread attention due to their extensive enrichment in waste activated sludge (WAS) and potentially adverse effect to anaerobes. This study selected benzalkonium chlorides (BACs) as model to reveal the responses of anaerobic digestion of WAS to long-term stress of BACs. Results showed that the solubilization enhancement of WAS contributed by BACs was the acceleration of cell lysis, rather than the disruption of extracellular polymeric substances, and the accumulation improvement of short chain fatty acids (SCFAs) attributed to hydrolysis improvement and methanogenesis inhibition at either medium -or high level of BACs. In addition, a low level had no significant effect on the production of methane compared to control, with averages of 0.059 and 0.055 m³/(m³·d), respectively, whereas a medium level reduced methane production to 20% of control, and a high level almost completely inhibited methanogenesis. Correspondingly, BACs could shift microbial communities related to SCFAs and methane productions. For the bacterial community, a high level of BACs led to abundance reductions of Firmicutes, Bacteroidetes, Acidobacteria and Chloroflexi, but Synergistetes was increased to 10.5%, which was almost not detected either in control or at a low level of BACs. And for dominant archaeal community, they tended to be shifted from acetotrophic to hydrogenotrophic methanogens with BACs increasing from low to high level. These findings provided some new insights for the role of BACs in anaerobic digestion, as well as resource recovery from WAS.

Water recovery and on-site reuse of laundry wastewater by a facile and cost-effective system: Combined biological and advanced oxidation process

Combined biological and physicochemical process was selected for treatment of laundry wastewater. The results show that after microbial adaptation, almost 91% of COD was removed at food to microorganism (F/M) ratio of 0.12 gBOD/gMLSS·d. Dehydrogenase activity of the biomass showed an increasing trend and finally reached 3.8 μgTFgbiomass.d corresponding to the highest process performance. 16SrRNA fragment and phylogenetic analysis identified Pseudomonas pharmacofabricae and Bacillus spp. as the dominant bacteria. The effluent of the biological process was then injected into the UV/O3 process for complete removal of residual COD and detergent. Finally, microfiltration and ultrafiltration were used to remove any remaining suspended solids. The operating cost analysis showed that 0.65 €/m3 treated wastewater is required for treatment of the laundry wastewater. Accordingly, the suggested combination of the biological and physicochemical process could be a promising and highly efficient process for treatment and reuse of laundry wastewater.

Enhanced degradation of glucocorticoids, a potential COVID-19 remedy, by co-fermentation of waste activated sludge and animal manure: The role of manure type and degradation mechanism

Waste activated sludge (WAS) and animal manure are two significant reservoirs of glucocorticoids (GCs) in the environment. However, GC degradation during anaerobic digestion (AD) of WAS or animal manure has rarely been investigated. In this study, co-fermentation of WAS and animal manure was conducted to investigate the performance of AD in controlling GC dissemination. Effects of manure type on GC degradation and sludge acidification were investigated. The results showed that co-fermentation of WAS and chicken manure (CM) significantly enhanced the degradation of hydrocortisone (HC) to 99%, betamethasone (BT) to 99%, fluocinolone acetonide (FA) to 98%, and clobetasol propionate (CP) to 82% in 5 days with a mixing ratio of 1:1 (g TS sludge/g dw manure) at 55 °C and initial pH of 7. Simultaneously, sludge reduction was increased by 30% and value-added volatile fatty acid (VFA) production was improved by 40%. Even a high GC content of biomass (3.6 mg/g TS) did not impact both sludge hydrolysis and acidification. The amendment of WAS with CM increased soluble organic carbon, Ca²⁺, and relative abundance of anaerobes (Eubacterium) associated with organic compound degradation. Furthermore, 44 transformation products of HC, BT, FA, and CP with lower lipophilicity and toxicity were identified, indicating possible degradation pathways including hydroxylation, ketonization, ring cleavage, defluorination, hydrogenation, methylation, and de-esterification. Overall, this study provides a practical way to control GC pollution and simultaneously promote waste reduction and VFA production. Animal manure type as an overlooked factor for influencing co-fermentation performance and pollutant degradation was also highlighted.

Pharmaceuticals and Their Main Metabolites in Treated Sewage Sludge and Sludge-Amended Soil: Availability and Sorption Behaviour

This work evaluated the availability and sorption behaviour of four pharmaceuticals and eight of their metabolites in sewage sludge and sludge-amended soil. Digested sludge and compost were evaluated. The highest levels found in digested sludge corresponded to caffeine (up to 115 ng g⁻¹ dm), ibuprofen (45 ng g⁻¹ dm) and carbamazepine (9.3 ng g⁻¹ dm). The concentrations measured in compost were even lower than in digested sludge. No compound was detected in sludge-amended soils. This fact could be due to the dilution effect after sludge application to soil. Different adsorption capacities in sludge–soil mixtures were measured for the studied compounds at the same spike concentration. In general, except for paraxanthine and 3-hydroxycarbamazepine, the metabolite concentrations measured in the mixtures were almost two-fold lower than those of their parent compounds, which can be explained by their mobility and lixiviation tendency. The log K_d ranged from −1.55 to 1.71 in sludge samples and from −0.29 to 1.18 in soil–sludge mixtures. The log K_d values calculated for compost were higher than those calculated for digested sludge. The obtained results implied that the higher organic carbon content of compost could influence soil contamination when it is applied to soil.

Industrial Symbiosis through the Use of Biosolids as Fertilizer in Romanian Agriculture

Biosolids’ use in agriculture is an example of industrial symbiosis. The application of biosolids (BS) in agriculture is considered one of the most sustainable sewage sludge (SS) management options, but the quality of biosolids has to meet certain requirements regarding the characteristics of the sludge, those of the land and of the type of crop. Web of Science database has been used to search for the relevant literature. The review of studies undertaken in order to determine the economic effects of the use of biosolids in agriculture shows, in the majority, an increase in crop yield and the reduction in costs, due to the reduction in the requirements for the application of chemical or synthetic fertilizers. If the entire sewage sludge production in Romania for 2019 had been used as fertilizer, the estimated cost reduction for farmers would have been almost 3 million Euros—considering the 230.59 thousand tons of dry matter produced in 2019. The estimated savings for 2019 of the sewage and water utilities, if the sewage sludge had been used in agriculture instead of depositing it at the landfill, would have been about 3.9 million Euros. However, the limits of the symbiosis are due to the size of the farms, the type of plants cultivated, pH, slope inclination, heavy metal content and social acceptance. It is impossible to use all the sewage sludge in agriculture, but these figures are a good estimation of the economic effects.

Agricultural and non-agricultural directions of bio-based sewage sludge valorization by chemical conditioning

This literature review outlines the most important-agricultural and non-agricultural-types of sewage sludge management. The potential of waste sludge protein hydrolysates obtained by chemical sludge conditioning was reported. The discussed areas include acidic and alkaline hydrolysis, lime conditioning, polyelectrolyte dewatering and other supporting techniques such as ultrasounds, microwave or thermal methods. The legislative aspects related to the indication of the development method and admission to various applications based on specified criteria were discussed. Particular attention was devoted to the legally regulated content of toxic elements: cadmium, lead, nickel, mercury, chromium and microelements that may be toxic: copper and zinc. Various methods of extracting valuable proteins from sewage sludge have been proposed: chemical, physical and enzymatic. While developing the process concept, you need to consider extraction efficiency (time, temperature, humidity, pH), drainage efficiency of post-extraction residues and directions of their management. The final process optimization is crucial. Despite the development of assumptions for various technologies, excess sewage sludge remains a big problem for sewage treatment plants. The high costs of enzymatic hydrolysis, thermal hydrolysis and ultrasonic methods and the need for a neutralizing agent in acid solubilization limit the rapid implementation of these processes in industrial practice.

A Mechanistic Model to Assess the Fate of Naphthalene and Benzo(a)pyrene in a Chilean WWTP

Polycyclic aromatic hydrocarbons (PAHs) are a family of organic compounds of widespread presence in the environment. They are recalcitrant, ubiquitous, prone to bioaccumulation, and potentially carcinogenic. Effluent from wastewater treatment plants (WWTPs) constitutes a major source of PAHs into water bodies, and their presence should be closely monitored, especially considering the increasing applications of potable and non-potable reuse of treated wastewater worldwide. Modeling the fate and distribution of PAHs in WWTPs is a valuable tool to overcome the complexity and cost of monitoring and quantifying PAHs. A mechanistic model was built to evaluate the fate of PAHs in both water and sludge lines of a Chilean WWTP. Naphthalene and benzo(a)pyrene were used as models of low-MW and high-MW PAHs. As there were no reported experimental data available for the case study, the influent load was determined through a statistical approach based on reported values worldwide. For both naphthalene and benzo(a)pyrene, the predominant mechanism in the water line was sorption to sludge, while that in the sludge line was desorption. Compared to other studies in the literature, the model satisfactorily describes the mechanisms involved in the fate and distribution of PAHs in a conventional activated sludge WWTP. Even though there is evidence of the presence of PAHs in urban centers in Chile, local regulatory standards do not consider PAHs in the disposal of WWTP effluents. Monitoring of PAHs in both treated effluents and biosolids is imperative, especially when considering de facto reuse and soil amendment in agricultural activities are currently practiced downstream of the studied WWTP.

Effects of microplastics on the removal of trace organic compounds during ozonation: Oxidation and adsorption of trace organic compounds and byproducts

Trace organic compounds (TOrCs) and microplastics (MPs) have been recognized as emerging pollutants that cause severe water pollution related problems due to their non-degradable and bio-accumulative nature. Many studies on oxidation processes such as ozone have been conducted to efficiently remove TOrCs in water treatment. However, there has been a lack of research on the removal efficiency of TOrCs in the oxidation process when they co-exist with MPs and form transformation byproducts (TBPs) during this process. This study evaluates the effects of MPs on TOrC removal during ozonation at various ozone concentrations and based on the mass of MP particles in distilled water. The adsorption of TBPs and TOrCs was also evaluated using the Freundlich and Langmuir isotherm equations. The toxicity of these compounds was evaluated to confirm the risk to aquatic ecosystems. The results show that triclosan (TCS) had the highest absorption capacity amongst the TOrCs and TBPs tested. Polyvinylchloride exhibited the highest adsorption efficiency compared with polyethylene and polyethyleneterephthalate (TCS 0.341 mg/g) due to its high adsorption capacity and hydrophobicity. In the toxicity test, 2,4-dichlorophenol and 4-chloroaniline as TBPs had a relatively higher toxicity to Vibrio fischeri (a marine bacterial species) than Daphnia magna (a freshwater plankton species).

Occurrence of pharmaceutical residues, personal care products, lifestyle chemicals, illicit drugs and metabolites in wastewater and receiving surface waters of Krakow agglomeration in South Poland

This is the first study of broad range of chemical classes CECs conducted in the upper Wisla river catchment including the biggest WWTPs in this region and surface waters. The list of compounds is extensive and the paper provides, for the first time, better understanding of environmental burden from PCPCs in Poland. Cumulative contribution of hypertension pharmaceuticals, nonsteroidal anti-inflammatory drugs (NSAIDs) and lifestyle chemicals was 89% and 95% in wastewater influent, and 75% in wastewater effluent at both WWTPs. Significant removal efficiencies, exceeding 90%, were found for parabens, UV filters, NSAIDs, steroid estrogens, plasticizers, antibacterials/antibiotics, stimulants and metabolites and lifestyle chemicals. The comparison of the average mass loads of CECs between the influent and effluent, has shown that 27% and 29% of all detected CECs were removed by less than 50%. An increase of concentrations of CECs in the effluent was observed for 18% and 20% of all detected CECs in Kujawy and Plaszow WWTPs, respectively. Negative mass balances of fexofenadine, venlafaxine, o-desmethyltramadol, ketamine and temazepam were noted within WWTPs, which are a result of dissolution of persistent contaminants accumulated in aggregates and/or back-transformation or de-conjugation of metabolites into parent compounds. 44 CECs were detected in surface waters located upstream and downstream of the WWTPs. The concentrations of compounds were largely dependent on the dilution factor of WWTP discharge. The risk quotation (RQ) values for compounds present in surface waters were calculated in relation to their potential for bioaccumulation. Among compounds with high potential for bioaccumulation, with log K_OW ≥ 4.5, diclofenac, atorvastatin and triclosan were found to be of high risk. Many CECs with high, moderate or even low environmental impact have shown high potential for bioaccumulation and should be considered as priority at the same risk level. Moreover, possible synergistic action is still of concern.

WITHDRAWN: Progress in the removal of organic microcontaminants from wastewater using high retention membrane bioreactors: A critical review

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/our-business/policies/article-withdrawal.

Performance evaluation of biocatalytic and biostimulation approaches for the remediation of trace organic contaminants in municipal biosolids

Trace organic contaminants (TrOCs) in biosolids is creating potential threats for reuse of biosolids. Out of the tested 64 trace organic contaminants, seven pharmaceutically active compounds (PhACs), and three pesticides were detected in biosolids from a municipal wastewater treatment plant. This study encompasses the removal of TrOCs and improvement in the aerobic digestion of biosolids by various pretreatments including utilization of indigenous microbes present in biosolids (T1), the effect of an enzymatic pretreatment (T2), biostimulation by the addition of an external carbon source (T3) and the synergic effect of biostimulation and enzymatic pretreatment (T4). After 28 days of aerobic digestion, total PhACs removal was 44% with T1, which improved to 51%, 54% and 62% in T2, T3 and T4, respectively. Also, total pesticides removal was 10% in T1, which enhanced to 44%, 14% and 54% in T2, T3 and T4, respectively. The extracellular enzyme activities were also monitored in all the treatments and the maximum activities (114 ± 11 U/L lipase, 382 ± 29 U/L phosphatase, 155 ± 8 U/L protease, 304 ± 26 U/L amylase, 108 ± 7 U/L laccase, and 63 ± 2 U/L lignin peroxidase) were observed in T4 after 28 days of digestion. Thus, this study aids in providing changing aspects of enzyme profiles during these processes and the enhanced bioremediation of biosolids through the hydrolytic and oxidoreductase enzymes produced by the indigenous microorganisms.

Occurrence, fate, and persistence of emerging micropollutants in sewage sludge treatment

Sludge generated at sewage treatment plants is of environmental concern due to the voluminous production and the presence of a high concentration of emerging contaminants (ECs). This review discusses the fate of ECs in sewage sludge treatment with an emphasis on fundamental mechanisms driving the degradation of compounds based on chemical properties of the contaminant and process operating conditions. The removal of ECs in sewage sludge through various treatment processes of sludge stabilization, such as anaerobic digestion (AD), composting, and pre-treatment methods (thermal, sonication, and oxidation) followed by AD, are discussed. Several transformation mechanisms and remediation strategies for the removal of ECs in sludge are summarized. The study concludes that pH, sludge type, and the types of functional groups are the key factors affecting the sorption of ECs to sludge. During conventional waste stabilization processes such as composting, the degradation of ECs depends on the type of feedstock (TOC, N, P, C/N, C/P) and the initial concentration of the contaminant. In AD, the degree of degradation depends on the hydrophilicity of the compound. The estrogenicity of the sludge may sometimes increase due to the conversion to estrogenic compounds. The pre-treatment techniques can increase the partitioning of ECs in the soluble fraction resulting in enhanced biodegradation up to 10-60%. However, the formation of by-products and loss of OH· to scavenging under high organic content during advanced oxidation processes can make the process uneconomical and require further research.

Pretreatment using UV combined with CaO2 for the anaerobic digestion of waste activated sludge: Mechanistic modeling for attenuation of trace organic contaminants

Trace organic contaminants (TOrCs) in waste active sludge (WAS) have caused many concerns due to their recalcitrance and detriment to the performance of anaerobic digestion (AD). In this study, UV (2 h) combined with calcium peroxide (CaO₂, 0.1 g g^-1-VSS (VSS, volatile suspended solid) was proposed as a suitable sludge pretreatment to enhance the AD performance with an increase in the production of maximum total short-chain fatty acids (421.3 %) and methane (119.2 %). Meanwhile, above 50 % removal efficiency for 19 detected TOrCs was achieved. UV and CaO₂ had a synergistic effect on the subsequent AD of WAS. Both UV and Ca(OH)₂ produced by CaO₂ played important roles in the dissolution of WAS and the subsequent AD, while UV-direct and OH-indirect photolysis accounted for TOrCs attenuation. In order to predict TOrCs attenuation by UV/CaO₂ treatment, a TOrCs photolysis model was tentatively established using carbamazepine as an indicator. This predictive model expressed a good prediction with adj-R² = 0.94, and the difference of predicted and measured values was within 27.3 %. This work evaluates a sludge pretreatment for simultaneously TOrCs attenuation and methane accumulation, laying foundation for promotion of sludge resource recycling.

Acidogenesis is a key step in the anaerobic biotransformation of organic micropollutants

Understanding the role of the different anaerobic digestion stages on the removal of organic micropollutants (OMPs) is essential to mitigate their release from wastewater treatment plants. This study assessed the fate of 21 OMPs during hydrolysis and acidogenesis to elucidate the contribution of these stages to the overall anaerobic removal. Moreover, the removal mechanisms and factors influencing them were investigated. To this purpose, a fermentation reactor was operated and fed with two different substrates: starch (to jointly evaluate hydrolysis and acidogenesis) and glucose (to isolate acidogenesis). Results indicate that sulfamethoxazole was highly biotransformed (>80 %), while galaxolide, celestolide, tonalide, erythromycin, roxithromycin, trimethoprim, octylphenol and nonylphenol achieved a 50-80 % biotransformation. Since no significant differences in the biotransformation efficiencies were found between starch and glucose fermentation, it is stated that the enzymatic activities involved in starch hydrolysis do not significantly contribute to the cometabolic biotransformation of OMPs, while acidogenesis appears as the major player. Moreover, a higher biotransformation (≥15 percentage points and p ≤ 0.05) was found for galaxolide, celestolide, tonalide, erythromycin and roxithromycin during acidogenesis in comparison with the efficiencies reported for the acetogenic/methanogenic step. The biotransformation of some OMPs was explained considering their chemical structure and the enzymatic activities.

Extraction of nonylphenol, pyrene and phenanthrene from sewage sludge and composted biosolids by cyclodextrins and rhamnolipids

Sewage sludge generated by Waste Water Treatment Plants (WWTPs) are frequently used as organic amendments in agriculture, but they contain pollutants such as Potentially Toxic Elements (PTEs) and organic contaminants which contaminate the agricultural soils. The study presented here is part of a larger study based on the application of environmentally friendly chemical and biological techniques to decrease the content of organic pollutants in sewage sludge before agricultural application. The aim of this study was to evaluate the performance of biodegradable extractants, such as some cyclodextrins (CDs), β-cyclodextrin (BCD), hydroxypropyl-β-cyclodextrin (HPBCD) and randomly methylated-β-cyclodextrin (RAMEB), and a biosurfactant (rhamnolipid, RL) on the removal and availability of pyrene (PYR), phenanthrene (PHE) and nonylphenol (NP) from several biosolids samples in order to improve their subsequent biodegradation. The influence of pollutants retention time on biosolids was studied, as well as the effect of each extractant on PTEs solubilization. Results obtained were pollutant and extractant-dependent. BCD extracted similar amounts of pollutants compared to water, whereas HPBCD and RAMEB actually increased the availability of the three pollutants in most of the samples and aging times. RL seems to be the best election for Polycyclic Aromatic Hydrocarbons (PAHs) extraction from biosolids, with percentages of extraction multiplied by more than 80 and 40 times for PHE and PYR, respectively, relative to water extraction. The extraction enhancement was the highest for NP, the most hydrophobic pollutant, reaching more than 500-fold higher with HPBCD and RAMEB. PTEs extractability was not affected by the different CDs used, but RL caused an increment in their soluble content what could endanger a subsequent biodegradation of the organic pollutants.

Ecotoxicological risk evaluation and regulatory compliance of endocrine disruptor phthalates in a sustainable wastewater treatment scheme

Due to their pervasive applications, phthalic acid esters or phthalates have ample presence in all environmental compartments. A principal source of their existence in freshwater is phthalate-laden wastewater treatment plant effluents. For its sustainable operation and biogas production, wastewater treatment scheme of up flow anaerobic sludge blanket (UASB) and polishing pond is more prevalent in developing countries. This yearlong study focused on evaluating the occurrence, fate and risk of four priority phthalates, diethyl phthalate (DEP), dibutyl phthalate (DBP), benzylbutyl phthalate (BBP), and diethylhexyl phthalate (DEHP) in a UASB+ polishing pond-based wastewater treatment plant. Concentration of the phthalates in raw wastewater ranged from nd to 17.36 μg/L (DEP), 0.92 to 18.26 μg/L (DBP), nd to 6.54 μg/L (BBP), and nd to 53.21 μg/L (DEHP). DEHP concentrations in UASB sludge were below 100 mg/kg, the recommended limit by the European Union for safe disposal of dewatered sludge. All four compounds were removed approximately 80% in the wastewater treatment plant, with larger removal in polishing pond than UASB. Sorption contributes a significant portion of BBP and DEHP removal (15-24%) in UASB than DEP and DBP (0-3%). Seasonally, larger removals of phthalates were observed during the summer season. Risk assessment showed that the treated effluents had low risk of DEP, DBP, and BBP. However, the hazard quotient (HQ) of DEHP was greater than 1. To comply with regulations, dilution requirement of effluents was investigated which showed that a dilution factor of 4.4 in summer and 2.1 in winter is required for effluents of UASB + Pond-based treatment plant.

Behavior of microplastics and plastic film residues in the soil environment: A critical review

It is now widely acknowledged that microplastic pollution represents one of the greatest anthropogenically mediated threats to Earth-system functioning. In freshwater and marine ecosystems the presence of large amounts of microplastic appears almost ubiquitous, with frequent reports of negative impacts on aquatic health. In contrast, however, the impact of plastic in terrestrial environments remains poorly understood. In agroecosystems, microplastics (particles < 5 mm) can enter the soil environment either directly (e.g. from biosolids application, irrigation water, atmospheric deposition), or indirectly through the in situ degradation of large pieces of plastic (e.g. from plastic mulch films). Although we have encouraged the use of plastics over the last 50 years in agriculture to promote greater resource use efficiency and food security, the legacy of this is that many soils are now contaminated with large amounts of plastic residue (ca. 50-250 kg ha^-1). Due to difficulties in separating and quantifying plastic particles from soil, our knowledge of their behavior, fate and potential to transfer to other receptors (e.g. surface and groundwater, air) and enter the human food chain remains poor. This information, however, is critical for evaluating the risk of soil-borne microplastic pollution. In this critical review, we systematically summarize (i) the distribution and migration of microplastics in soils, (ii) highlight the separation, extraction, and identification methods for monitoring microplastics in soils, (iii) discuss the ecological effects and pollution mechanisms of soil microplastics, (iv) propose mitigation strategies to help prevent and reduce microplastic pollution, and (v) identify the most important future challenges in soil microplastics research.

Role of treatment configuration in simultaneous removal of priority phthalic acid esters and nitrogen in a post anoxic integrated biofilm activated sludge system

To develop future wastewater treatment systems, focus is to improve/investigate existing biological wastewater treatment processes for the concurrent treatment of conventional pollution parameters (essentially nitrogen) and micro pollutants. Majority of the existing biological wastewater treatment systems were not designed for the removal of micro pollutants. This study focuses on understanding the role of treatment configuration for efficient removal of nitrogen and priority phthalic acid esters (PAEs) from real municipal wastewater in an integrated biofilm activated sludge (IBAS) system. The reactor was operated in two phases: Run I, without external carbon source in anoxic reactor and Run II, a nitrogen removal process, with partial diversion of untreated wastewater in anoxic reactor. Nitrogen removal was 70 ± 12% in both operational phases, however, during Run I, removal of PAEs fluctuated with an average removal of 60-78%. Comparatively, removal of PAEs in Run II varied over a smaller range with average removal increased to 89-95%. In both operational scenarios, secondary oxic tank contributed maximum to the overall removal of PAEs in treatment system. Mass balance calculations showed significant contribution of biodegradation towards overall removal of PAEs which was enhanced by the supply of external carbon source. Kinetics and model output supported the PAEs removal performance observed in different reaction environments of IBAS process. A correlation between food to microorganism (F/M) ratio and PAEs removal showed increase in PAEs removal with decrease in F/M ratio. The study showed that treatment configuration and F/M ratio may be one of the guiding parameters for efficient removal of PAEs in biological wastewater treatment.

Enhancing the removal efficiency of osmotic membrane bioreactors: A comprehensive review of influencing parameters and hybrid configurations

The amount of research conducted on osmotic membrane bioreactors (OMBRs) has increased over the past decade because of the advantages of these reactors over conventional membrane bioreactors (MBRs). OMBR process is a hybrid process involving a forward osmosis membrane and biologically activated sludge. It is a promising technology to reduce membrane fouling, enhance effluent water quality, and lower energy consumption compared to conventional MBR processes. Eleven years since the OMBR process was first proposed, about 60 papers regarding the OMBR process have been published. In this article, we address recent advances in OMBR technology based on a review of the literature. Typical factors that influence the performance of the OMBR process are discussed to provide a clear understanding of the current state of this technology. We also provide a critical review of OMBR applications in organic matter, nutrient, and micropollutant removal as well as direct recovery of nutrients from wastewater. We propose several hybrid configurations that can enhance the removal efficiency of OMBR systems. Finally, we present potential research directions for future OMBR research.

Understanding the mechanisms of trace organic contaminant removal by high retention membrane bioreactors: a critical review

High retention membrane bioreactors (HR-MBR) combine a high retention membrane separation process such as membrane distillation, forward osmosis, or nanofiltration with a conventional activated sludge (CAS) process. Depending on the physicochemical properties of the trace organic contaminants (TrOCs) as well as the selected high retention membrane process, HR-MBR can achieve effective removal (80-99%) of a broad spectrum of TrOCs. An in-depth assessment of the available literature on HR-MBR performance suggests that compared to CAS and conventional MBRs (using micro- or ultra-filtration membrane), aqueous phase removal of TrOCs in HR-MBR is significantly better. Conceptually, longer retention time may significantly improve TrOC biodegradation, but there are insufficient data in the literature to evaluate the extent of TrOC biodegradation improvement by HR-MBR. The accumulation of hardly biodegradable TrOCs within the bioreactor of an HR-MBR system may complicate further treatment and beneficial reuse of sludge. In addition to TrOCs, accumulation of salts gradually increases the salinity in bioreactor and can adversely affect microbial activities. Strategies to mitigate these limitations are discussed. A qualitative framework is proposed to predict the contribution of the different key mechanisms of TrOC removal (i.e., membrane retention, biodegradation, and sorption) in HR-MBR.

Diethylhexyl phthalate removal in full scale activated sludge plants: Effect of operational parameters

Removal of emerging contaminants (ECs) is a serious concern in wastewater industry especially for public acceptance of reclaimed water. Diethylhexyl phthalate (DEHP) is one of the ubiquitous and detectable plasticizers in municipal wastewater across the globe. Water Framework Directive (2000/60/EC) has prioritized it for the establishment of discharge regulations. A cost-effective strategy, especially for developing nations, may be the re-engineering of the existing biological process for the simultaneous removal of ECs and conventional pollutants. Wastewater treatment plants are one of the main sources for DEHP occurrence in surface water. In this study, possible role of activated sludge process operational parameters in effective removal of DEHP was assessed. Principal component analysis of occurrence data showed dissimilarity with the organic and nutrient characteristics of sewage. DEHP concentration in more than half (55%) of treated wastewater samples was more than environmental quality standard value for inland and surface water bodies (1.3 μg/L). At a mixed liquor suspended solid (MLSS) concentration range of 3461-4972 mg/L, overall removal was 23.9 μg/gMLSS.d (92 ± 6%) with biodegraded portion as 22.4 μg/gMLSS.d (85 ± 4%) and sorbed portion of 1.5 μg/gMLSS.d (7 ± 4%). DEHP removal showed an increasing trend at higher oxygen uptake rates (OUR) of sludge with DEHP removal of 8.1  μg DEHP/gMLSS.d (70 ± 6%), in the OUR range of 20-28mgO₂/L/h. Increase in overall removal of DEHP showed a positive correlation (r² = 0.7) with increasing sludge retention time (SRT) and so does the decreasing food to microorganism (F/M) ratio with increasing removal of DEHP (r² = 0.8). A temperature decrease of 13 °C caused a decrease of 30% in overall removal of DEHP.

Potential Benefits and Risks for Soil Health Derived From the Use of Organic Amendments in Agriculture

The use of organic amendments in agriculture is a common practice due to their potential to increase crop productivity and enhance soil health. Indeed, organic amendments of different origin and composition (e.g., animal slurry, manure, compost, sewage sludge, etc.) can supply valuable nutrients to the soil, as well as increase its organic matter content, with concomitant benefits for soil health. However, the application of organic amendments to agricultural soil entails a variety of risks for environmental and human health. Organic amendments often contain a range of pollutants, including heavy metals, persistent organic pollutants, potential human pathogens, and emerging pollutants. Regarding emerging pollutants, the presence of antibiotic residues, antibiotic-resistant bacteria, and antibiotic-resistance genes in agricultural amendments is currently a matter of much concern, due to the concomitant risks for human health. Similarly, currently, the introduction of microplastics to agricultural soil, via the application of organic amendments (mainly, sewage sludge), is a topic of much relevance, owing to its magnitude and potential adverse effects for environmental health. There is, currently, much interest in the development of efficient strategies to mitigate the risks associated to the application of organic amendments to agricultural soil, while benefiting from their numerous advantages.

Cometabolic biotransformation and impacts of the anti-inflammatory drug diclofenac on activated sludge microbial communities

This study evaluated the removal of diclofenac (DCF) in activated sludge and its long-term exposure effects on the function and structure of the microbial community. Activated sludge could remove <50% of 50 μg/L DCF. The removal decreased significantly to below 15% when DCF concentrations increased to 500 and 5000 μg/L. Quantitative assessment of the fate of DCF showed that its main removal routes were biodegradation (21%) and adsorption (7%), with other abiotic removals being insignificant (<5%). The biodegradation occurred through cometabolic mechanisms. DCF exposure in the range of 50-5000 μg/L did not disrupt the major functions of the activated sludge ecosystem (e.g. biomass yield and heterotrophic activity) over two months of DCF exposure. Consistently, 16S rRNA gene-based community analysis revealed that the overall community diversity (e.g. species richness and diversity) and structure of activated sludge underwent no significant alterations. The analysis did uncover a significant increase in several genera, Nitratireductor, Asticcacaulis, and Pseudacidovorax, which gained competitive advantages under DCF exposure. The enrichment of Nitratireductor, Asticcacaulis, and Pseudacidovorax genus might contribute to DCF biodegradation and emerge as a potential microbial niche for the removal of DCF.

MP-UV/CaO2 as a pretreatment method for the removal of carbamazepine and primidone in waste activated sludge and improving the solubilization of sludge

Medium-pressure ultraviolet light (MP-UV) combined with calcium peroxide (CaO₂) as a pretreatment technology for removing carbamazepine (CBZ) and primidone (PMD) in waste active sludge (WAS) and improving the solubilization of sludge were investigated. CBZ and PMD were effectively removed and the removal fitted pseudo-first kinetics under MP-UV/CaO₂ treatment with R² > 0.97. The higher CaO₂ dosage and lower initial volatile suspended solids (VSS) concentration were conductive to the removal of CBZ and PMD. Of the CaO₂ hydrolysates, Ca(OH)₂ played a more important role than H₂O₂ during MP-UV/CaO₂ treatment. The removal of the target compounds was attributed to direct photolysis and indirect photolysis caused by •OH, ³DOM^*, and ¹O₂, in which •OH played a vital role with > 62.2% contribution to the overall degradation rate. A model predicting the steady concentration of •OH in WAS ([VSS] ≈ 8.6 g L^-1) under MP-UV/CaO₂ treatment with CaO₂ dosage ranging from 0 to 0.5 g g^-1-VSS was proposed and validated. Moreover, major intermediates of CBZ and PMD were detected and the probable transformation pathways during MP-UV/CaO₂ treatment were proposed. In addition, MP-UV/CaO₂ promoted the sludge solubilization effectively. Considering both the pharmaceutical degradation and sludge solubilization, the optimum operation condition with 0.2 g-CaO₂ g^-1-VSS combined with 7 h MP-UV irradiation is recommended. Under this condition, more than 92.3% of CBZ and 90.3% of PMD were removed, and soluble chemical oxygen demand (SCOD) increased by 657% and 13.6% compared with sole 10 h CaO₂ (0.2 g g^-1-VSS) treatment and 7 h MP-UV treatment, respectively.