Waste-derived compost and biochar amendments for stormwater treatment in bioretention column: Co-transport of metals and colloids

Management of saline-alkali sandy soils by amphoteric lignin-based sand fixation

The management of deserts and saline-alkali sandy soils requires a large number of efficient and economical sand-fixing agent. However, the preparation of sand-fixing materials with excellent overall performance is still a great challenge. In this work, a sand-fixing agent with amphiphilic polyelectrolyte (ASL-PVA) was prepared by graft copolymerisation of sodium lignosulfonate (SL) with cationic (DMDAAC) and polyvinyl alcohol (PVA). The sand fixation of ASL-PVA was evaluated using typical saline-alkali sandy soils from the desert topsoil of Inner Mongolia, China. The anionic, cationic and benzene ring structure of ASL-PVA give it excellent water retention, adhesion and degradation resistance in saline-alkali sandy soils. The antipolyelectrolyte effect between ASL-PVA and soluble salt ions can improve its salt tolerance. Moreover, lignin as a precursor of humus makes ASL-PVA also has the properties of improving the physicochemical properties of saline-alkali sandy soils and promoting plant growth. The ASL-PVA sand-fixing agent demonstrates promising application potential in saline-alkali sandy soil improvement and desert restoration.

Potentials of urban waste derived biochar in minimizing heavy metal bioavailability: A techno-economic review

Contamination of heavy metals (HMs) in agroecosystem presented an additional dimension of complexity along with the adverse consequences of climate change for the scientific fraternity. The increasing population and urbanization on the other hand are regarded as the main sources of urban waste (UW). Holistic utilization of UW-derived biochar (BC) has shown potential to be utilized as a source of soil supplement in the agriculture sector, fulfilling several sustainable development goals (SDGs). An attempt has been made to evaluate the techno-economical prospect, efficacy of UW-BC in remediation HMs from SDGs and circular bio-economy prospective. Current review has highlighted that biochar, when amended alone/in combination, enhances HMs remediation potential. Economic analysis of UW-BC reinforces its viability as a sustainable solution for waste management. Consequently, the application of UW-BC has the potential to contribute significantly to the achievement of multiple SDGs, warranting further research and increased investment in this field.

Bench-scale bioretention systems: Potential of substrates with and without coconut fiber for plant growth development

Bioretention systems are sustainable solutions designed to address environmental challenges arising from urbanization by improving water quality and filtering surface runoff, while integrating green spaces into urban landscapes. However, there is limited research on the adaptability of vegetation in these systems within tropical regions, indicating a gap in the use of native species in green technologies. This study evaluates the adaptability and growth of three plant species-Sansevieria trifasciata 'Hahnii', Chlorophytum comosum, and Ruellia simplex-in bioretention systems utilizing local materials. Two configurations were tested: a conventional system (vegetation, organic compost, sand, and gravel) and a modified system (vegetation, organic compost, coconut fiber, sand, and gravel). The systems were monitored for 17 weeks at an average temperature of 30 °C, irrigated with synthetic stormwater runoff, and assessed for height, stem diameter, number of leaves, and such as monitoring the presence of fungi on the soil surface of the bioretention columns, chlorosis of leaves and new shoots. Results showed that S. trifasciata 'Hahnii' did not tolerate the medium with excessive moisture. C. comosum exhibited increased leaf development over time, but no significant differences were found between the modified and conventional columns (p > 0.05). R. simplex showed growth rates of 6.80 mm/day in conventional columns and 4.81 mm/day in modified ones, with no significant differences (p > 0.05) observed for either species. Overall, both C. comosum and R. simplex demonstrated satisfactory development in the different media tested, indicating their potential for use in urban greening within bioretention systems in tropical environments.

Performance of wood waste biochar and food waste compost in a pilot-scale sustainable drainage system for stormwater treatment

Sustainable drainage system (SuDS) for stormwater reclamation has the potential to alleviate the water scarcity and environmental pollution issues. Laboratory studies have demonstrated that the capacity of SuDS to treat stormwater can be improved by integrating biochar and compost in the filter media, whereas their performance in scaled-up applications is less reported. This study examines the effectiveness of a pilot-scale SuDS, bioswale followed by bioretention, amended with wood waste biochar (1, 2, and 4 wt.%) and food waste compost (2 and 4 wt.%) to simultaneously remove multiple pollutants including nutrients, heavy metals, and trace organics from the simulated stormwater. Our results confirmed that SuDS modified with both biochar (2 wt.%) and compost (2 wt.%) displayed superior water quality improvement. The system exhibited high removal efficiency (> 70%) for total phosphorus and major metal species including Ni, Pb, Cd, Cr, Cu, and Zn. Total suspended solids concentration was approaching the detection limit in the effluent, thereby confirming its capability to reduce turbidity and particle-associated pollutants from stormwater. Co-application of biochar and compost also moderately immobilized trace organic contaminants such as 2,4-dichlorophenoxyacetic acid, diuron, and atrazine at field-relevant concentrations. Moreover, the soil amendments amplified the activities of enzymes including β-D-cellobiosidase and urease, suggesting that the improved soil conditions and health of microbial communities could possibly increase phyto and bioremediation of contaminants accumulated in the filter media. Overall, our pilot-scale demonstration confirmed that the co-application of biochar and compost in SuDS can provide a variety of benefits for soil/plant health and water quality.

Waste derived modified biochar as promising functional material for enhanced water remediation potential

The waste management and water purification are daunting environmental challenges. Biochar, a carbonaceous material prepared from diverse organic waste (agricultural, household residues and municipal sewage sludge) has garnered substantial attention due to its excellent attributes, including carbon content, cation exchange efficacy, ample specific surface area, and structural robustness. Thus, the present review comprehensively analyzes bio waste-derived biochar with a particular emphasis on water remediation applications. This article primarily delves into various strategies for modifying biochar, elucidating the underlying mechanisms behind these modifications and their potential for bolstering pollutant removal efficiency. Furthermore, it addresses the impact of functionalization on both biochar stability and cost for commercialization. Lastly, the article outlines key developments, SWOT analysis, and future prospects, offering insights into the practical execution of biochar applications at a larger scale. Therefore, this article paves the way for future research to deepen the understanding of modified biochar with mechanisms for exploring water remediation applications in a more sustainable manner.

Resilience of stormwater biofilters following the deposition of wildfire residues: Implication on downstream water quality management in wildfire-prone regions

Stormwater treatment systems such as biofilters could intercept and remove pollutants from contaminated runoff in wildfire-affected areas, ensuring the protection of water quality downstream. However, the deposition of wildfire residues such as ash and black carbon onto biofilters could potentially impair their stormwater treatment functions. Yet, whether and how wildfire residue deposition could affect biofilter functions is unknown. This study examines the impact of wildfire residue deposition on biofilter infiltration and pollutant removal capacities. Exposure to wildfire residues decreased the infiltration capacity based on the amount of wildfire deposited. Wildfire residues accumulated at the top layer of the biofilter, forming a cake layer, but scraping this layer restored the infiltration capacity. While the deposition of wildfire residues slightly changed the pore water geochemistry, it did not significantly alter the removal of metals and E. coli. Although wildfire residues leached some metals into pore water within the simulated root zone, the leached metals were effectively removed by the compost present in the filter media. Collectively, these results indicate that biofilters downstream of wildfire-prone areas could remain resilient or functional and protect downstream water quality if deposited ash is periodically scraped to restore any loss of infiltration capacity following wildfire residue deposition.

Research on the purification efficiency and mechanism for road runoff pollutants in pervious concrete with recycled aggregates

The use of recycled aggregate (RA) in pervious concrete (PC) is a green approach that can effectively mitigate urban waterlogging, excessive RA, and runoff pollution, thereby enhancing the urban ecological environment. This article focuses on the long-term purification efficiency of runoff pollutants by PC at different porosities and RA dosages. Moreover, the purification mechanism of pollutants by recycled aggregate pervious concrete (RAPC) was revealed utilizing particle size analysis, microstructure, and elemental analysis. Finally, the recovery effects of different maintenance approaches on the purification capacity of RAPC were explored. The results indicate that an increase in the RA dosage reduced the effective porosity of PC, thereby decreasing the permeability of RAPC. In addition, PC with a lower porosity demonstrated a slightly greater purification effectiveness for pollutants. However, the utilization of RA significantly enhanced the purification capacity of PC for various pollutants, primarily by leveraging advantages in terms of pore structure, micromorphology, and surface chemical composition. Additionally, RAPC exhibited nearly 100 % retention effectiveness for particles larger than 68.95 μm but relatively lower purification efficiency for particles ranging from 1.541 to 17.11 μm. In particular, it displayed the poorest purification performance for particles with a diameter of 6.396 μm. The surface of RAPC's pore channels exhibited a loose state with high porosity and appeared rough and uneven with numerous pits and grooves. RAPC had a larger surface area and contained more components, such as SiO2, CaCO3, and Al2O3, than regular PC. Therefore, RAPC possessed a higher purification capacity. High-pressure flushing (HPF) and sodium citrate flushing (SCF) under different maintenance frequencies significantly contributed to the recovery of the purification efficiency of RAPC. However, overall, a lower maintenance frequency led to a less favorable recovery effect. Furthermore, SCF had a better recovery effect than HPF.

Influence of humic acid and bovine serum albumin on colloid-associated heavy metal transport in saturated porous media

Colloid-facilitated contaminant transport in porous media has been widely observed in laboratory and field studies. In this study, the influence of two dissolved organic matters (DOMs), humic acid (HA) and bovine serum albumin (BSA), on the colloid-associated heavy metal transport, was investigated. Soil colloids with particle sizes <2 μm were prepared from bentonite. Glass bead was used as porous media for the column tests. The influence of DOM on the adsorption of Pb2+ and Cu2+ onto colloids was tested. Colloid mobility and colloid-metal co-transport in the presence/absence of DOMs were investigated by breakthrough tests. The test results showed that DOMs facilitated colloid mobility. The measured ζ-potentials showed that DOMs enhanced the electrostatic repulsion between colloids and glass beads and reduced colloid deposition. These findings were further confirmed by calculating the interaction energy using the DLVO theory. Batch tests showed the strong adsorption of Pb2+ and Cu2+ on the colloid, and the adsorption was enhanced by DOMs. The colloid-metal co-transport tests showed that colloids can significantly facilitate the transport of Pb2+ and Cu2+ and that the facilitation was further enhanced by DOMs. By heavy metals, the colloid mobility was retarded, mainly due to the increased deposition. The transport of Cu2+ facilitated by DOM was more obvious than that of Pb2+. Compared to BSA, the effect of HA on enhancing colloid mobility, increasing colloid adsorption to heavy metals, and hence on the facilitation of colloid-associated heavy metals transport was more prominent.

Enhanced Escherichia coli removal from stormwater with bermudagrass-derived activated biochar filtration systems

Stormwater treatment and reuse can alleviate water pollution and scarcity while current sand filtration systems showed low treatment performance for stormwater. For enhancing E. coli removal in stormwater, this study applied the bermudagrass-derived activated biochars (BCs) in the BC-sand filtration systems for E. coli removal. Compared with the pristine BC (without activation), the FeCl3 and NaOH activations increased the BC carbon content from 68.02% to 71.60% and 81.22% while E. coli removal efficiency increased from 77.60% to 81.16% and 98.68%, respectively. In all BCs, the BC carbon content showed a highly positive correlation with E. coli removal efficiency. The FeCl3 and NaOH activations also led to the enhancement of roughness of BC surface for enhancing E. coli removal by straining (physical entrapment). The main mechanisms for E. coli removal by BC-amended sand column were found to be hydrophobic attraction and straining. Additionally, under 105-107 CFU/mL of E. coli, final E. coli concentration in NaOH activated BC (NaOH-BC) column was one order of magnitude lower than those in pristine BC and FeCl3 activated BC (Fe-BC) columns. The presence of humic acid remarkably lowered the E. coli removal efficiency from 77.60% to 45.38% in pristine BC-amended sand column while slightly lowering the E. coli removal efficiencies from 81.16% and 98.68% to 68.65% and 92.57% in Fe-BC and NaOH-BC-amended sand columns, respectively. Moreover, compared to pristine BC, the activated BCs (Fe-BC and NaOH-BC) also resulted in the lower antibiotics (tetracycline and sulfamethoxazole) concentrations in the effluents from the BC-amended sand columns. Therefore, for the first time, this study indicated NaOH-BC showed high potential for effective treatment of E. coli from stormwater by the BC-amended sand filtration system compared with pristine BC and Fe-BC.

Outflow risks of antibiotic-resistant bacteria in stormwater bioretention cells: understanding roles of adsorption and transmission

In this study, lab-scale bioretention cells were designed for the investigation of antibiotic-resistant bacteria (ARB) outflow profiles at different depths, effects of adsorption and transmission, as well as modelling evaluation of ARB outflow risks using the common decay models (e.g., first-order decay models). ARB outflow was first found in the upper layers (after 100 days of the operation) with the lowest transmission frequencies of antibiotic resistance. Although the adsorption of ARB onto the substrate and its surface biofilms was effective with the maximum amount of ARB adsorbed (Qmax) reaching 108 CFU/g of the substrate and 107 CFU/g of biofilms, ARB outflow was detected in the bottom outlets after over 4 months of operation, reflecting that there was still a risk of antibiotic resistance through the treatment of bioretention cells. ARB outflow for both upper and middle outlets could be well described by third-order polynomial equations with correlation coefficients 0.9067 (p = 0.0002) and 0.9780 (p < 0.0001), respectively, where there were both positive and negative relationships between outflow ARB and inflow ARB, confirming the combined action of mechanisms blocking ARB outflow (e.g., substrate adsorption) and promoting ARB outflow (like transmission). These suggested two potential controlling approaches for ARB outflow from stormwater bioretention cells.

A critical review on sustainable hazardous waste management strategies: a step towards a circular economy

Globally, industrialisation and urbanisation have led to the generation of hazardous waste (HW). Sustainable hazardous waste management (HWM) is the need of the hour for a safe, clean, and eco-friendly environment and public health. The prominent waste management strategies should be aligned with circular economic models considering the economy, environment, and efficiency. This review critically discusses HW generation and sustainable management with the strategies of prevention, reduction, recycling, waste-to-energy, advanced treatment technology, and proper disposal. In this regard, the major HW policies, legislations, and international conventions related to HWM are summarised. The global generation and composition of hazardous industrial, household, and e-waste are analysed, along with their environmental and health impacts. The paper critically discusses recently adapted management strategies, waste-to-energy conversion techniques, treatment technologies, and their suitability, advantages, and limitations. A roadmap for future research focused on the components of the circular economy model is proposed, and the waste management challenges are discussed. This review stems to give a holistic and broader picture of global waste generation (from many sources), its effects on public health and the environment, and the need for a sustainable HWM approach towards the circular economy. The in-depth analysis presented in this work will help build cost-effective and eco-sustainable HWM projects.

Predicting PFAS and Hydrophilic Trace Organic Contaminant Transport in Black Carbon-Amended Engineered Media Filters for Improved Stormwater Runoff Treatment

Improved stormwater treatment is needed to prevent toxic and mobile contaminant transport into receiving waters and allow beneficial use of stormwater runoff. In particular, safe capture of stormwater runoff to augment drinking water supplies is contingent upon removing dissolved trace organic contaminants (TrOCs) not captured by conventional stormwater control measures. This study builds upon a prior laboratory-based column study investigating biochar and regenerated activated carbon (RAC) amendment for removing hydrophilic trace organic contaminants (HiTrOCs) and poly- and perfluoroalkyl substances (PFASs) from stormwater runoff. A robust contaminant transport model framework incorporating time-dependent flow and influent concentration is developed and validated to predict HiTrOC and PFAS transport in biochar- and RAC-amended stormwater filters. Specifically, parameters fit using a sorption-retarded intraparticle pore diffusion transport model were validated using data further along the depth of the column and compared to equilibrium batch isotherms. The transport model and fitted parameters were then used to estimate the lifetime of a hypothetical stormwater filter in Seal Beach, CA, to be 35 ± 6 years for biochar- and 51 ± 17 years for RAC-amended filters, under ideal conditions with no filter clogging. This work offers insights on the kinetics of HiTrOC and PFAS transport within biochar and RAC filters and on the impact of filter design on contaminant removal performance and longevity.

Effect of biochar derived from co-pyrolysis of sewage sludge and rice straw on cadmium immobilization in paddy soil

The remediation of cadmium (Cd) contaminated cropland has been related to food safety and public health. While biochar derived from sewage sludge (SS) has been widely used for soil remediation due to its high efficiency of Cd immobilization, it has a low specific surface area and the ecological risk of heavy metals. Co-pyrolysis of straws and SS could resolve these issues. To date, little is known about the effect of biochar from SS/rice straw (RS) on Cd immobilization in soils. Here, we explored the soil remediation efficiency and mechanism of biochar derived from different mixing ratios (1:0, 3:1, 2:1, 1:1, 1:2, 1:3 and 0:1) of RS and SS named as RBC, R3S1, R2S1, R1S1, R1S2, R1S3 and SBC. It was shown that R1S2 amendment had the most efficiency of Cd immobilization among all amendments, which decreased the bioavailable Cd by 85.61% and 66.89% compared with RBC and SBC amendments. Results of biochar after soil remediation revealed that cation-π interaction, complexation, ion exchange and precipitation were the key mechanisms of Cd immobilization by biochar. All biochar amendments indirectly promoted Cd immobilization through increasing soil pH values, cation exchange capacity (CEC), soil organic carbon (SOC) and available phosphorous (AP). Compared with RBC, R1S2 reduced bioavailable Cd mainly through the increased soil pH, CEC and AP. However, the enhanced efficiency of Cd immobilization in R1S2 amendment than that in SBC amendment because of the more developed pore structure, functional groups and larger specific surface area of R1S2. Overall, our study showed a new type of biochar for the effective remediation of Cd-contaminated soil.

A comparative life-cycle assessment and cost analysis of biofilters amended with sludge-based activated carbon and commercial activated carbon for stormwater treatment

Environmental and economic issues resulting from the unsustainable management of sewage sludge from wastewater have necessitated the development of eco-friendly sewage sludge disposal methods, whereas stormwater effluent contains tremendous amounts of pollutants. This study compares the feasibility and environmental impacts associated with incorporating biofilters with sludge-based activated carbon (SBAC) versus commercial activated carbon (CAC) for stormwater treatment. The results demonstrate that the construction and disposal life-cycle stages are the dominant contributors to several environmental impact categories, including resource scarcity, carcinogenic toxicity, terrestrial ecotoxicity, and ozone formation indicators. Across multiple impact categories, the incorporation of biofilters with SBAC can reduce the negative environmental impacts associated with biofilter construction and disposal by 40% over a 50-year analysis period. In contrast, the most significant improvement is on construction-dominant indicators, where the decreased need for biofilter reconstruction results in a higher reduction in environmental impacts. Economically, amending the biofilter with SBAC can increase profits by up to 66% due to extending its lifespan. This study shows that SBAC has similar performance as CAC for lowering the negative environmental impacts resulting from biofilter construction, while increasing the overall net profits of the system. However, converting sewage sludge to an effective sorbent (SBAC) and incorporating SBAC into a biofilter to capture pollutants from stormwater is an economically and environmentally sustainable solution available to practitioners to manage sewage sludge and stormwater effluent. This solution protects the environment in a cost efficient, sustainable manner.

Simultaneous immobilization of arsenic, lead, and cadmium in soil by magnesium-aluminum modified biochar: Influences of organic acids, aging, and rainfall

Magnesium-aluminum modified biochar (MABs) has an outstanding effect on the simultaneous immobilization of arsenic (As), lead (Pb), and cadmium (Cd) in soil, but the stability of remediation effect of MAB under various natural conditions is still unknown. In this study, we investigated the effects of organic acids, dry-wet cycles (DW), freeze-thaw cycles (FT), and rainfall (pH 4, 7, and 8) on the immobilization of As, Pb, and Cd by MAB. The results showed that oxalic acid decreased the immobilization efficiencies of As, Pb, and Cd by 15.5%-38.5%; meanwhile, humic acid reduced the immobilization efficiency of Pb by 89.7%, but elevated that of Cd by 19.5%. The immobilization mechanisms of MAB-5 on three metals were mainly involved in ion exchange and surface-complexation. Compared with the 7th round, the immobilization efficiencies of As, Pb, and Cd by MAB in the 28th round was decreased by 17%-28% in DW, but was increased by 11%-18% in FT. In addition, MAB was transformed into hydrotalcite after FT and DW. After experiencing simulated rainfall, MAB caused more As, Pb, and Cd to be retained in the upper soil layer, and the immobilization effect of MBA was more significant under the stimulated rainfall with higher pH. The study provides a more theoretical basis for the application of MAB in the actual site remediation.

Biochar benefits carbon off-setting in blue-green infrastructure soils - A lysimeter study

Carbon sequestration with amendments in blue-green infrastructure soils could off-set anthropogenic greenhouse gas emissions to alleviate climate change. In this 3-year study, the effects of wheat straw and its biochar on carbon sequestration in an urban landscaping soil were investigated under realistic outdoor conditions using two large-scale lysimeters. Both amendments were carried out by incorporating pellets at 0-15 cm soil depth with an equivalent initial total carbon input of 2% of the dry soil weight. Soil carbon, carbon isotope ratios, dissolved carbon in leachates, CO₂-C emissions, carbon fixed in above ground vegetation, soil water content, soil bulk electrical conductivity, and water infiltration rates, were then compared between the 2 lysimeters. After 3 years, we observed that, despite having a 17.2% lower vegetation growth, soil organic and inorganic carbon content was higher by 28.8% and 41.5%, respectively, in biochar as compared to wheat straw amended soil. Carbon isotope analysis confirmed the greater stability of the added carbon in the biochar amended soil. Water content was on average 23.2% and 13.0% in the straw pellet and biochar amended soil, respectively, whereas water infiltration rates were not significantly different between the two lysimeters. Overall, the incorporation of wheat straw biochar into soil could store an estimated 30 tonnes of carbon per hectare in city blue-green infrastructure spaces. Interviews involving institution stakeholders examined the feasibility of this biochar application. Stakeholders recognized the potential of biochar as an environment-friendly means for carbon offsetting, but were concerned about the practicality of biochar production and application into soil and increased maintenance work. Consequently, additional potential benefits of biochar for environmental management such as improving the quality of polluted run-off in stormwater treatment systems should be emphasized to make biochar an attractive proposition in sustainable urban development.

Soil heterogeneity influence on the distribution of heavy metals in soil during acid rain infiltration: Experimental and numerical modeling

Acid rain is a global environmental problem that mobilizes heavy metals in soils, while the distribution and geochemical fraction of heavy metals during acid rain infiltration in heterogeneous soils are still unclear. In this study, we performed column experiments to investigate the distribution and geochemical fraction of Cu, Pb, Ni and Cd in heterogeneously layered soils during continuous acid rain infiltration. Chloride ion used as a conservative tracer was found to be uniformly distributed during acid rain infiltration, showing insignificant preferential flow effects in the column. In contrast, however, the distribution of heavy metals was highly non-uniform, especially in the silty soil at the lower part of the column, indicating a heterogeneous distribution of adsorption capacity. In addition, in the control experiments with neutral rain infiltration, uniform distribution of heavy metals was observed, indicating that the heterogeneous distribution of adsorption coefficient during acid rain infiltration was mainly caused by different pH buffering capacities. A numerical model considering water flow and solute transport was developed, where the average water-solid distribution coefficient (K_d) in Layer 2 was only 1.5-12.5% of that in Layer 1 during acid rain infiltration. The model could predict the variation of heavy metal concentrations in soil with the majority of error less than 35%, confirming that different K_d induced the heterogeneous distribution of heavy metals. In addition, the geochemical fraction of heavy metals in the upper coarse sand layer remained stable, while the acid-extractable fractions in the lower loam and silt loam layer gradually increased. Our findings suggest that soil heterogeneity, especially chemical heterogeneity affected by rainfall acidity, has an important influence on the infiltration, migration and geochemical fraction of heavy metals in soils. This study could help guide the risk assessment of heavy metal-contaminated sites that were polluted by acid rain or landfill leachate.

Potential application of spent mushroom compost (SMC) biochar as low-cost filtration media in heavy metal removal from abandoned mining water: a review

Overpopulation and rapid development have put an increasing burden on the environment, leading to various water crisis. Importing water from abandoned mines as an alternative raw water source could be the next answer to alleviate water scarcity problems globally. However, due to its high heavy metals content, there is a need to find an economical and effective method to remove heavy metals before reusing it as potable water source. Biochar, a low-cost and carbon-rich biosorbent, has received increasing attention on its application as a remediating agent to remove heavy metals from water. Previous studies have revealed the potential properties of biochar as a heavy metal removal agent including high cation exchange capacity, high surface area, active surface functional groups, as well as efficient adsorption. Apparently, the most important factor influencing the sorption mechanism is the type of feedstock materials. Spent mushroom compost (SMC), a waste product from mushroom cultivation, has been found as an excellent biosorbent. SMC has received global attention as it is low cost and eco-friendly. It also has been proved as an efficient heavy metals remover from water. Nevertheless, its application as biochar is still scarce. Therefore, this review focuses on the potential of transforming SMC into modified biochar to remove heavy metals, especially from abandoned mining water. The present review emphasizes the current trends in adsorption methods for heavy metal removal from water, assembles data from previous studies on the feedstock of biosorbents to biochars, and discusses the potentials of SMC as a biochar for water treatment.

Black Carbon-Amended Engineered Media Filters for Improved Treatment of Stormwater Runoff

Urban stormwater runoff is a significant driver of surface water quality impairment. Recently, attention has been drawn to potential beneficial use of urban stormwater runoff, including augmenting drinking water supply in water-stressed areas. However, beneficial use relies on improved treatment of stormwater runoff to remove mobile dissolved metals and trace organic contaminants (TrOCs). This study assesses six engineered media mixtures consisting of sand, zeolite, high-temperature gasification biochar, and regenerated activated carbon (RAC) for removing a suite of co-contaminants comprising five metals, three herbicides, four pesticides, a corrosion inhibitor, six per- and polyfluoroalkyl substances (PFASs), five polychlorinated biphenyls (PCBs), and six polycyclic aromatic hydrocarbons (PAHs). This long-term laboratory-scale column study uses a novel approach to generate reproducible synthetic stormwater that incorporates catch basin material and straw-derived dissolved organic carbon. Higher flow conditions (20 cm hr^-1), larger sized media (0.42-1.68 mm), and downflow configuration with outlet control increase the relevance of this study to better enable implementation in the field. Biochar- and RAC-amended engineered media filters removed nearly all of the TrOCs in the effluent over the course of three months of continuous flow (480 empty bed volumes), while sample ports spaced at 25% and 50% along the column depth provide windows to observe contaminant transport. Biochar provided greater benefit to TrOC removal than RAC on a mass basis. This study used relatively high concentrations of contaminants and low biochar and RAC content to observe contaminant transport. Performance in the field is likely to be significantly better with higher biochar- and RAC-content filters and lower ambient stormwater contaminant concentrations. This study provides proof-of-concept for biochar- and RAC-amended engineered media filters operated at a flow rate of 20 cm hr^-1 for removing dissolved TrOCs and metals and offers insights on the performance of biochar and RAC for improved stormwater treatment and field trials.

Application of biochar as an innovative soil ameliorant in bioretention system for stormwater treatment: A review of performance and its influencing factors

As an emerging environment functional material, biochar has become a research hotspot in environmental fields because of its excellent ecological and environmental benefits. Recently, biochar has been used as an innovative soil ameliorant in bioretention systems (BRS) to effectively enhance pollutant removal efficiency for BRS. This paper summarizes and evaluates the performance and involved mechanisms of biochar amendment in BRS with respect to the removal of nutrients (TN (34-47.55%) and PO₄^3--P (47-99.8%)), heavy metals (25-100%), pathogenic microorganisms (Escherichia coli (30-98%)), and organic contaminants (77.2-100%). For biochar adsorption, the pseudo-second-order and Langmuir models are the most suitable kinetic and isothermal adsorption models, respectively. Furthermore, we analyzed and elucidated some factors that influence the pollutant removal performance of biochar-amended BRS, such as the types of biochar, the preparation process and physicochemical properties of biochar, the aging of biochar, the chemical modification of biochar, and the hydraulic loading, inflow concentration and drying-rewetting alternation of biochar-amended BRS. The high potential for recycling spent biochar in BRS as a soil ameliorant is proposed. Collectively, biochar can be used as an improved medium in BRS. This review provides a foundation for biochar selection in biochar-amended BRS. Future research and practical applications of biochar-amended BRS should focus on the long-term stability of treatment performances under field conditions, chemical modification with co-impregnated nanomaterials in biochar surface, and the durability, aging, and possible negative effects of biochar.

Removal of nitrate from agricultural runoff in biochar electrode based biofilm reactor: Performance and enhancement mechanisms

A biochar electrode based biofilm reactor was developed for advanced removal of nitrate from agricultural runoff. The corn-straw (Zea mays L.) biochar formed at 500 °C has an adsorption capacity of NO₃^--N up to 2.659 mg g^-1. After 45-day start-up phase, the removal efficiency of nitrate reached 93.4% when impressed current was 20 mA, hydraulic retention time was 12 h and chemical oxygen demand/total nitrogen (C/N) ratio was 0.56 without additional carbon source. In comparison, neither electrochemical reduction alone nor microbial denitrification alone could obtain the ideal nitrate removal efficiency. The results implied that bio-electrochemical reduction was the main way of nitrate removal in the biofilm electrode reactor (BER). The denitrification efficiency of 88.9% could still be obtained when C/N = 0. It is because biochar can significantly promote the utilization efficiency of cathode electrons by microorganisms. Thus, biochar is a promising electrode material, which provides a new idea for the optimization of BER.

Two-step ball milling-assisted synthesis of N-doped biochar loaded with ferrous sulfide for enhanced adsorptive removal of Cr(Ⅵ) and tetracycline from water

Nitrogen-doped biochar loaded with FeS (FeS@NBC_BM) was synthesized by two-step ball milling processes. Characterization results revealed that N-doping process successfully introduced pyridinic, pyrrolic, and graphitic N structures, and FeS was subsequently embedded in N-doped biochar (NBC_BM). The resultant FeS@NBC_BM presented predominant adsorption capacity for Cr(VI) (194.69 mg/g) and tetracycline (TC, 371.29 mg/g) compared with BC (27.28 and 37.89 mg/g) and NBC_BM (71.26 and 81.26 mg/g). In addition, the Cr(VI)/TC elimination process by FeS@NBC_BM was basically stable with multiple co-existing ions with slight decrease on adsorption performance after three desorption-regeneration cycles. Most importantly, FeS@NBC_BM was found to achieve Cr(VI) elimination not only by electrostatic attraction, ion exchange and complexation, but also by electrons-triggered reduction provided by different species of N, Fe²⁺ as well as S(Ⅱ). Meantime, pore filling, hydrogen bonding, and π-π stacking interactions were demonstrated to contribute to TC adsorption. These results suggested the co-modification of N-doping and FeS loading by ball milling as an innovative decorating method for biochar to adsorptive purification of Cr(VI) and TC-contaminated water.

Concurrent elimination and stepwise recovery of Pb(II) and bisphenol A from water using β-cyclodextrin modified magnetic cellulose: adsorption performance and mechanism investigation

Coexistence of heavy metals and endocrine disrupting compounds in polluted water with competitive adsorption behavior necessitates design of tailored adsorbents. In this work, β-cyclodextrin modified magnetic rice husk-derived cellulose (β-CD@MRHC) which can provide independent functional sites for effectively binding the above two types of contaminants was synthesized and used for Pb(II) and BPA elimination in both unit and multivariate systems. Characterizations results confirmed successful β-CD grafting and Fe₃O₄ loading, and the β-CD@MRHC had excellent magnetic property for its effectively recovery from water, which was not affected by the adsorption of pollutants. The β-CD@MRHC possessed superior adsorption performance with maximal Pb(II)/BPA uptake of 266.2 or 412.8 mg/g, severally, and the adsorption equilibrium was fleetly reached in 30 and 7.5 min. Moreover, the β-CD@MRHC could accomplish synergetic Pb(II) and BPA elimination through averting their competitive behaviors owing to diverse capture mechanisms for Pb(II) (ion exchange, complexation and electrostatic attraction) and BPA (hydrogen bonding and host-guest inclusion). Furthermore, after three cycles of step-wise desorption, the binding of Pb(II) as well as BPA byβ-CD@MRHC dropped slightly in dualistic condition. In summary, β-CD@MRHC was a promising tailored adsorbent to practical application for simultaneously removing heavy metals and organic matters from wastewater with high-performance magnetic recovery.

Antibiotic resistance genes removals in stormwater bioretention cells with three kinds of environmental conditions

Recently, increasing attention has been paid to antibiotic resistance genes (ARGs) in stormwater runoff. However, there is still no available literature about ARGs removals through stormwater bioretention cells. Batch experiments were conducted to investigate target ARGs (bla_TEM, tetR and aphA) removals under three environmental conditions, including substrate (weight ratios of sand to soil), hydraulic loading rate (HLR) and submerged area depth. The target ARGs removals were the largest (more than 5 log in the bottom outlets) in bioretention cells with 8:2 ratio of sand to soil, HLR 0.044 cm³/cm²/min and 150 mm of submerged area depth. The proportion for both iARGs and eARGs had little effect on target ARGs removals (expect extracellular bla_TEM), although distributions of target ARGs were different in substrate layers. Adsorption behavior tests indicated that both kinetics and isotherms of target ARGs adsorption by biofilms were more suitable to explain their best removals for bioretention cells with 8:2 ratio of sand to soil than that by substrate. At phylum and genus levels, there were respectively 6 dominant microflora related significantly to target ARGs levels, and their relationships changed obviously under different environmental conditions, suggesting that regulating the dominant microflora (like Verrucomicrobia and Actinobacteria) could be feasible to change ARGs removals.

Natural aging of expanded shale, clay, and slate (ESCS) amendment with heavy metals in stormwater increases its antibacterial properties: Implications on biofilter design

Aging is often expected to decrease the pathogen removal capacity of media because of exhaustion of attachment sites by adsorption of co-contaminants and dissolved organics. In contrast, the adsorption of metals naturally present in stormwater during aging could have a positive impact on pathogen removal. To examine the effect of adsorbed metals on pathogen removal, biofilter media amended with expanded clay, shale, and slate (ESCS) aggregates, a lightweight aggregate, were exposed to metals by intermittently injecting natural stormwater spiked with Cu, Pb, and Zn, and the capacity of aged and unaged media to remove Escherichia coli (E. coli), a pathogen indicator, were compared. Metal adsorption on ESCS media decreased their net negative surface charge and altered the surface properties as confirmed by zeta potential measurement and Fourier-Transform Infrared Spectroscopy (FTIR) analysis. These changes increased the E. coli adsorption capacity of aged media compared with unaged media and decreased overall remobilization of attached E. coli during intermittent infiltration of stormwater. A live-dead analysis confirmed that the adsorbed metals inactivated attached E. coli, thereby replenishing the adsorption capacity. Overall, the results confirmed that natural aging of biofilter media with adsorbed metals could indeed have a net positive effect on E. coli removal in biofilters and therefore should be included in the conceptual model predicting long-term removal of pathogens from stormwater containing mixed pollutants.

Engineered biochar: A multifunctional material for energy and environment

Biochar is a stable carbon-rich product loaded with upgraded properties obtained by thermal cracking of biomasses in an oxygen-free atmosphere. The pristine biochar is further modified to produce engineered biochar via various physical, mechanical, and chemical methods. The hasty advancement in engineered biochar synthesis via different technologies and their application in the field of energy and environment is a topical issue that required an up-to-date review. Therefore, this review deals with comprehensive and recent mechanistic approaches of engineered biochar synthesis and its further application in the field of energy and the environment. Synthesis and activation of engineered biochar via various methods has been deliberated in brief. Furthermore, this review systematically covered the impacts of engineered biochar amendment in the composting process, anaerobic digestion (AD), soil microbial community encouragement, and their enzymatic activities. Finally, this review provided a glimpse of the knowledge gaps and challenges associated with application of engineered biochar in various fields, which needs urgent attention in future research.

Biochar granulation enhances plant performance on a green roof substrate

Green roofs have been widely promoted as a means to enhance ecosystem services in cities, but roofs present a harsh growing environment for plants. Biochar is suggested to be a highly beneficial substrate additive for green roof systems due to its low weight, high nutrient and water retention capacity, and recalcitrance. However, biochar is susceptible to wind and water erosion, which may result in biochar loss and negative environmental impacts. Applications of biochar as large particles or in granulated form may mitigate biochar erosion potential, but relevant data on plant performance and substrate properties are lacking. We examined the effects of granulated and conventional biochars at a range of particle sizes on plant performance of the drought-tolerant forb Agastache foeniculum. We found that granulated biochar strongly enhanced plant growth, reproduction, and physiological status, acting to neutralize pH and enhance water retention capacity of the substrate. In contrast, although conventional biochar reduced substrate bulk density and enhanced substrate total porosity and water retention capacity, it suppressed plant growth. Our results also suggest that granulated biochar at intermediate particle sizes (2-2.8 mm) best enhanced plant performance. We conclude that use of granulated biochars on green roofs can strongly promote plant performance while increasing water infiltration and retention.

Stabilization of lead and cadmium in soil by sulfur-iron functionalized biochar: Performance, mechanisms and microbial community evolution

Sulfur-iron functionalized biochar (BC-Fe-S) was designed by simultaneously supporting Fe₂O₃ nanoparticles and grafting sulfur-containing functional groups onto biochar to stabilize Pb and Cd in soil. The BC-Fe-S exhibited excellent stabilization performance for Pb and Cd with fast kinetic equilibrium within 5 days associating with pseudo-second-order model. The bioavailable-Pb and -Cd contents decreased by 59.22% and 70.28% with 3% BC-Fe-S treatment after 20 days of remediation. Speciation transformation analysis revealed that the increase of stabilization time and BC-Fe-S dosage with appropriate soil moisture and pH promoted toxicities decrease of Pb and Cd with transformation of labile fractions to more steady fractions. The labile fractions of Pb and Cd decreased by 12.22% and 16.21% with 3% BC-Fe-S treatment, and transformed to the residual speciation. Meanwhile, wetting-drying and freezing-thawing aging did not markedly alter the bioavailability of Pb and Cd, proving that the BC-Fe-S holds promise for stabilization of Pb and Cd in varying environmental conditions. 16S rRNA sequencing analysis demonstrated that the BC-Fe-S significantly improved diversity and composition of microbial community, especially increasing the relative abundance of heavy metal-resistant bacteria. Overall, these results suggested BC-Fe-S as a high-performance and environmental-friendly amendment with stability to remediate heavy metals polluted soil.

Interactions between biochar and clay minerals in changing biochar carbon stability

The science-informed design of stable carbonaceous materials as 'green' soil amendment will be indispensable for improving the soil fertility and carbon sequestration ability. In this study, a series of biochars were prepared from mineral-rich cellulosic corn straw (C), lignocellulosic pine wood (P), and lignin-rich walnut shell (W) at 500 or 700 °C. Their change of carbon stability after 90-day interaction with two typical soil clay minerals (i.e., kaolinite or montmorillonite) under a field-relevant condition (mass ratio of biochar to soil clay at 1:5) was evaluated as carbon loss (%) determined by the K₂CrO₇-H₂SO₄ oxidation method. The spectroscopic analyses demonstrated that the highly graphitized and microporous W-biochars exhibited a high carbon stability (35.6-40.2% C loss) that could be further enhanced in the presence of kaolinite or montmorillonite. This promotion was probably ascribed to the transformation from the aromatic CC/CC functionality to the ester CO and methyl CH configurations on the biochar surface forming stable organo-mineral complexes (i.e., COAl) with the clay minerals. In contrast, a substantial level of labile C fraction was observed in the C- and P-biochars (e.g., 94.8% C loss of P700-M) after incubation with the clay minerals, especially for montmorillonite with high CEC, swelling capacity, and week interlayer bonding. This adverse impact was possibly attributed to the aliphatic CC/CC bonding with low oxidation resistance after co-precipitation with the clay minerals. The results of this study can provide deeper insight into the evolution of physicochemical properties, porous structure, and carbon interactions during long-term biochar application for carbon sequestration and sustainable development.

Integrating Tank Model and adsorption/desorption characteristics of filter media to simulate outflow water quantity and quality of a bioretention basin: A case study of biochar-based bioretention basin

Reliable approaches for accurately assessing the performance of stormwater treatment systems is essential for their effective design, including filter media selection which can be a significant constituent in stormwater treatment systems. This study presents an innovative modelling approach integrating the Tank Model with the adsorption-desorption characteristics of the filter media. The resulting modelling approach was applied to simulate a field-scale bioretention basin where biochar was used as filter media with over ten years of rainfall records. The resulting outflow and overflow volumes were compared with observed data for calibration. The Stormwater Treatment Tank Model (STTM) was validated using the Leave-One-Out-Cross-Validation (LOOCV) method. The simulation outcomes include water outflow and overflow (quantity) from the bioretention basin as well as outflow water quality represented by three heavy metals (Pb, Cu, and Zn). The modelling approach developed was found to be capable of accurately simulating outflow and overflow volumes, with outlet water quantity being significantly influenced by the total rainfall depth. The modeling results also suggested that a sole treatment system would not be adequate, particularly for large rainfall events (>100 mm) and a treatment train would be more effective. Simulating long-term (over ten years) pollutant removal performance in the bioretention basin indicated that heavy metals outflow event mean concentration (EMCs) values calculated using simulated results of 30% biochar application rate generated the best pollutant removal with consistent values (2.7 μg/L, 3.0 μg/L, 17.2 μg/L for Pb, Cu, and Zn, respectively). These results confirm that the modelling approach is reliable for assessing long-term treatment performance, as well as a robust tool able to contribute to more effective treatment system design, particularly filter media selection and evaluation.

Environmental impacts of hazardous waste, and management strategies to reconcile circular economy and eco-sustainability

The rise in living standards and the continuous development in the global economy led to the depletion of resources and increased waste generation per capita. This waste might posture a significant threat to human health or the environmental matrices (water, air, soil) when inadequately treated, transported, stored, or managed/disposed of. Therefore, effective waste management in an economically viable and environmentally friendly way has become meaningful. Prominent technology is the need of the day for circular economy and sustainable development to reduce the speed of depletion in resources and produce an alternative means for the future demands in the different sectors of science and technology. In order to meet the potential requirements for energy production or producing secondary raw material, solid waste may be the prime source. The activities of living organisms convert waste products in one form or another in which electronic waste (e-waste) is a modern-day problem that is growing by leaps and bounds. The disposal protocols of the e-waste management need to be given proper attention to avoid its hazardous impacts. The e-waste is obtained from any equipment or devices that run by electricity or batteries like laptops, palmtops, computers, televisions, mobile phones, digital video discs (DVD), and many more. E-waste is one of the rapidly growing causes of world pollution today. Plenty of research is available in the scientific literature, which shows different approaches being set up and followed to manage and dispose of waste products. These strategies to manage waste products designed by the states all over the globe revolves around minimal production, authentic techniques for the management of waste produced, reuse and recycling, etc. The virtual survey of the available literature on waste management shows that it lacks specificity regarding the management of waste products parallel to ecological sustainability. The presented review covers the sources, potential environmental impacts, and highlights the importance of waste management strategies to provide the latest and updated knowledge. The review also put forward the countermeasures that need to be taken on national and International levels addressing the sensitive issue of waste management.

Effective lead passivation in soil by bone char/CMC-stabilized FeS composite loading with phosphate-solubilizing bacteria

Bioremediation by phosphate-solubilizing bacteria (PSB) has attracted extensive attentions due to its economical and eco-friendly properties for lead (Pb) passivation in soil. Herein, bone char (BC) supported biochemical composite (CFB₁-P) carrying advantages of BC, PSB, iron sulfide (FeS) and carboxymethyl cellulose (CMC) was designed and applied to Pb passivation. The composite at a mass ratio of BC:CMC:FeS = 1:1:1 possessed high passivation efficiency (65.47%), and has been demonstrated to offer appropriate habitat environment for PSB to defend against Pb(II) toxicity, thus enhancing the phosphate-solubilizing amount of PSB to 140.72 mg/L for passivating Pb(II). Batch experiments showed that the CFB₁-P possessed excellent adsorption properties with maximal monolayer Pb(II) uptake of 452.99 mg/g during an extensive pH range of 2.0-6.0. Furthermore, by applying CFB₁-P dosage of 3% into Pb-contaminated soil, the labile Pb fractions were reduced from 29.05% to 6.47% after simulated remediation of 10 days, and converted into steady fractions. The CFB₁-P was demonstrated to achieve high Pb(II) passivation through combined functions of chemical precipitation, complexation, electrostatic attraction and biomineralization, accompanied by the formation of more stable crystal structures, for instance, Pb₅(PO₄)₃OH, Pb₃(PO₄)₂ and PbS. These results suggested CFB₁-P as a potential alternative for efficient remediation of Pb-contaminated soil.

Biochar nanoparticles with different pyrolysis temperatures mediate cadmium transport in water-saturated soils: Effects of ionic strength and humic acid

Biochar is advocated as an environment-friendly and cost-effective material for removing both heavy metals and organic contaminants in soil remediation. However, our understandings on the cotransport potential of contaminants with the nanoscale biochar downward along soil profiles (e.g., potential environmental risks towards groundwater) remain largely unknown. This study investigated the effects of wheat straw-derived biochar nanoparticles pyrolyzed at 350 °C and 500 °C (BNP350 and BNP500) on the transport of cadmium (Cd(II)) in water-saturated soil packed columns. Different ionic strengths (ISs) without/with humic acid (HA) were tested to mimic the scenarios during soil remediation. BNPs could act as a vehicle mediating Cd(II) transport in soils. At a low IS (1.0 mM KCl), compared to the limited transport of individual Cd(II), BNP500 enhanced (69 times) Cd(II) transport (Cd(II) mass recovery (M) = 7.59%) in soils, which was greater than that by BNP350 (54 times, M = 5.92%), likely due to the higher adsorption of Cd(II) onto BNP500. HA further increased the Cd(II) transport by BNPs (M = 8.40% for BNP350 and M = 11.95% for BNP500), which was mainly due to the increased mobility of BNPs carrying more absorbed Cd(II). In contrast, at a high IS (10 mM KCl), BNP500 dramatically inhibited the transport of Cd(II) (M = 12.9%), decreasing by about 61.6%, compared to the BNPs absence (M = 33.6%). This is because a large amount of BNP500-Cd(II) was retained in soils at a high IS. This inhibition effect of Cd(II) transport by BNPs was reinforced with the presence of HA. Our findings suggest that the pyrolysis temperature of biochar should be carefully considered when applying biochar for in-situ remediation of soils contaminated by heavy metals such as Cd(II) under various organic matter and IS conditions.

A critical review of biochar-based materials for the remediation of heavy metal contaminated environment: Applications and practical evaluations

The contamination of heavy metals (HMs) in the environment has aroused a global concern. The valid remediation of HM contaminated environment is a highly significant issue. As alternative to carbon materials, biochar has been vastly documented for the remediation of HM contaminated environment. However, there are some possible imperfections to meet the actual remediation tasks as the finite properties of raw biochar, and the remediation process is complex and unexpectedly. This review focuses on the progress made on environmental HM remediation by biochar-based materials within the past six years. The property analysis and key modifications of biochar are summarized inspired by their applicability or necessity for HM decontamination, and the environmental remediation as well as the implicated mechanisms are thoroughly elaborated from multiple pivotal sides. The evaluations of practical application associated with biochar amendment are also presented. Finally, some pertinent improvements and research directions are proposed. To our knowledge, this article is the first time to make a systematic summary on the reliability and practicability of biochar-based materials for environmental HM remediation, and critically pointed out the existing issues to facilitate the judicious design of biochar-based materials and understanding the research trends. It is also aims to provide reference for subsequent research and propel the practical applications.

Biochar-based bioretention systems for removal of chemical and microbial pollutants from stormwater: A critical review

Biochar has been increasingly used as a filter medium in engineered low impact development systems (e.g., bioretention systems) for decontamination of urban stormwater and management of hydrology. This review paper critically analyzes the performance of biochar-based biofiltration systems for removal of chemical and microbial pollutants present in urban runoff. Biochar-amended biofiltration systems efficiently remove diverse pollutants such as total nitrogen (32 - 61%), total phosphorus: (45 - 94%), heavy metals (27 - 100%), organics (54 - 100%) and microbial pollutants (log₁₀ removal: 0.78 - 4.23) from urban runoff. The variation of biofiltration performance is due to changes in biochar characteristics, the abundance of dissolved organic matter and/or stormwater chemistry. The dominant mechanisms responsible for removal of chemical pollutants are sorption, ion exchange and/or biotransformation, whereas filtration/straining is the major mechanism for bacteria removal. The pseudo-second order and Langmuir isotherm are the best models that describe the kinetics and chemical equilibrium of pollutants, respectively. This critical review provides the fundamental scientific knowledge for designing highly efficient biochar-based bioretention systems for removal of diverse pollutants from urban stormwater. The key knowledge gaps that should be addressed in future research include long-term field-scale bioretention study, development of novel methods for filter media regeneration/reuse, and dynamics of filter media microbial communities.

One-pot synthesis of Ca-based magnetic hydrochar derived from consecutive hydrothermal and pyrolysis processing of bamboo for high-performance scavenging of Pb(Ⅱ) and tetracycline from water

Ca-based magnetic bamboo-derived hydrochar described as Ca-MBHC was synthesized by one-pot pyrolysis, and was applied to remediation of lead (Pb) and tetracycline (TC) polluted water. Characterizations not only attested the loading of CaCO₃ and Fe⁰ onto the hydrochar, but also demonstrated the magnetism of Ca-MBHC. Adsorption kinetic experiments showed that the Ca-MBHC could eliminate Pb(II) and TC during a wide range of pH, and appeared rapid uptake equilibrium within 240 and 60 min for Pb(II) and TC, severally. Adsorption isotherm experiments showed that the Ca-MBHC possessed highest adsorption of 475.58 mg/g concerning Pb(II), and heterogeneous uptake of 142.44 mg/g for TC. Furthermore, the Ca-MBHC could achieve Pb(II) binding owing to complexation, reduction, ion exchange and electrostatic attraction, whereas the TC uptake might be related to π-π stacking reciprocities, pore filling and hydrogen bonding. Overall, the Ca-MBHC could be viewed as an excellent adsorbent for scavenging Pb(II) and tetracycline from water.

Magnetic porous biochar with high specific surface area derived from microwave-assisted hydrothermal and pyrolysis treatments of water hyacinth for Cr(Ⅵ) and tetracycline adsorption from water

Magnetic porous water hyacinth-derived biochar (MPBC_MW3) was synthesized via two-step Microwave (MW)-assisted processes. Characterization results not only testified high specific surface area (2097.50 m²/g) of the MPBC_MW3 assisted by MW-assisted pyrolysis, but also revealed its favorable magnetism derived from MW-assisted hydrothermal process. The MPBC_MW3 possessed pH-dependent monolayer adsorption capacities of 202.61 and 202.62 mg/g for Cr(VI) and TC with quick attainments of uptake equilibrium within 150 and 200 min. Moreover, the Cr(VI) and TC uptake were substantially steady under the interference from multifarious co-existing ions with slight decline after three adsorption-desorption cycles. Furthermore, the MPBC_MW3 was demonstrated to achieve excellent Cr(VI) binding primarily through complexation, electrostatic interaction, reduction and ion exchange, while presenting outstanding TC removal via pore filling, π-π stacking, hydrogen bonding force, electrostatic interaction and complexation. All these findings suggested the MPBC_MW3 synthesized by MW-assisted processes as an excellent adsorbent for purification of Cr(VI) and TC-contaminated water.

Removal of Cd(Ⅱ) and anthracene from water by β-cyclodextrin functionalized magnetic hydrochar: Performance, mechanism and recovery

Magnetic hydrochar modified by β-cyclodextrin (β-CD) described as β-CD@MHC was successfully synthesized and applied to simultaneous removal of cadmium (Cd) and anthracene (ANT). Characterizations attested the grafting of β-CD groups onto β-CD@MHC with excellent magnetism. Moreover, the β-CD@MHC could eliminate Cd(II) and ANT during an extensive pH scope, and presented fast adsorption equilibrium in 60 min and 80 min for Cd(II) and ANT, respectively. And the β-CD@MHC possessed prominent adsorption properties with maximum monolayer binding of 47.28 mg/g for Cd(II), and corresponding heterogeneous uptake of 60.27 mg/g concerning ANT. Furthermore, the β-CD@MHC could effectively avoid the competitive behavior between Cd(II) and ANT mainly due to complexation and electrostatic attraction effects for capturing Cd(II), and host-guest interaction in the removal of ANT. Additionally, the binding of Cd(II) and ANT onto β-CD@MHC dropped slightly after stepwise desorption, suggesting the β-CD@MHC as a high-performance adsorbent for heavy metals and PAHs elimination from wastewater.

Removal characteristics of heavy metal ions in rainwater runoff by bioretention cell modified with biochar

As a form of pollution source control and a low-impact development measure, bioretention is a convenient, economical, and effective method for the removal of heavy metals from stormwater runoff, which can adapt to the randomness and uncontrollability of non-point source pollution. However, few studies have assessed the performance of bioretention in the simultaneous removal of multiple heavy metals and the impact of heavy metal migration on the bioretention life cycle. In this study, the removal rates of various heavy metals: copper (Cu), zinc (Zn), lead (Pb), and cadmium (Cd), were enhanced using a biochar modified bioretention cell, as compared to the traditional sandy soil bioretention process. Following treatment with the biochar modified bioretention cell, the average concentrations of Cu, Zn, Pb, and Cd were 55%, 61%, 19.66%, and 36.43% lower than the traditional sandy soil bioretention effluent, respectively. These results show that biochar significantly improves the removal of heavy metals by the bioretention process, especially Cu and Zn. This study also evaluated the effect of biochar on the inhibition of heavy metal migration in the filler material, by sampling and analysing the filler and retained water at different filler depths, then repeating the filler leaching experiment after simulated rainfall. The content of heavy metals at a filler depth of 45 cm in the traditional sandy soil bioretention system, was significantly higher than in the biochar modified bioretention system, showing that biochar plays an important role in the inhibition of heavy metal migration.

Application of Fourier transform ion cyclotron resonance mass spectrometry in deciphering molecular composition of soil organic matter: A review

Swiftly deciphering soil organic matter (SOM) composition is critical for research on soil degradation and restoration. Recent advances in analytical techniques (e.g., optical methods and mass spectrometry) have expanded our understanding of the composition, origin, and evolution of SOM. In particular, the use of Fourier transform ion cyclotron resonance mass spectrometers (FTICR-MS) makes it possible to interpret SOM compositions at the molecular level. In this review, we discuss extraction, enrichment, and purification methods for SOM using FTICR-MS analysis; summarize ionization techniques, FTICR-MS mechanisms, data analysis methods, and molecular compositions of SOM in different environments (providing new insights into its origin and evolution); and discuss factors affecting its molecular diversity. Our results show that digenesis, combustion, pyrolysis, and biological metabolisms jointly contribute to the molecular diversity of SOM molecules. The SOM thus formed can further undergo photodegradation during transportation from land to fresh water (and subsequently oceans), resulting in the formation of dissolved organic matter (DOM). Better understanding the molecular features of DOM therefore accelerates our understanding of SOM evolution. In addition, we assess the degradation potential of SOM in different environments to better inform soil remediation methods. Finally, we discuss the merits and drawbacks of applying FTICR-MS on the analysis of SOM molecules, along with existing gaps in knowledge, challenges, and new opportunities for research in FTICR-MS applications and SOM identification.

Conventional and amended bioretention soil media for targeted pollutant treatment: A critical review to guide the state of the practice

Bioretention systems are widely used green infrastructure elements that utilize engineered bioretention soil media (BSM) for stormwater capture and treatment. Conventional bioretention soil media, which typically consists of sand, sandy loam, loamy sand or topsoil amended with compost, has limited capacity to remove and may leach some stormwater pollutants. Alternative engineered amendments, both organic and inorganic, have been tested to supplement BSM. Yet, municipalities and regulatory agencies have been slow to adopt these alternative amendments into their design specifications, partly because of a lack of clear guidance on how to select the right amendment to treat a target stormwater contaminant under highly variable climatic conditions. This article aims to provide that guidance by: (1) summarizing the current design BSM specifications adopted by jurisdictions worldwide, (2) comparing the performance of conventional and amended BSM, (3) highlighting advantages and limitations of BSM amendments, and (4) identifying challenges for implementing amendments in field conditions. The analysis not only informs the research community of the barriers faced by stormwater managers in implementing BSM amendments but also provides guidelines for their adoption by interested agencies to comply with existing regulations and meet design needs. This feedback loop could catalyze further innovation in the development of sustainable stormwater treatment technologies.

A critical review of contaminant removal by conventional and emerging media for urban stormwater treatment in the United States

Stormwater is a major component of the urban water cycle contributing to street flooding and high runoff volumes in urban areas, and elevated contaminant concentrations in receiving waters from contact with impervious surfaces. Engineers and city planners are investing in best management practices to reduce runoff volume and to potentially capture and use urban stormwater. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants (e.g., particles, nutrients, and some metals). This review describes options and opportunities to augment existing stormwater infrastructure with conventional and emerging reactive media to improve contaminant removal. This critical analysis characterizes media physicochemical properties and mechanisms contributing to contaminant removal, describes possible candidates for new engineered media, highlights lab and field studies investigating stormwater media contaminant removal, and identifies possible limitations and knowledge gaps in media implementation. Following this analysis, information is provided regarding factors that may contribute to or adversely impact urban stormwater treatment by media. The review closes with insights into additional research directions and important information necessary for safe and effective urban stormwater treatment using media.

Aluminum hydroxide colloid facilitated transport of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) in porous media

In this study, aluminum hydroxide colloids, which widely exist in soils, were selected to investigate their effect on the infiltration of an abundant congener of PBDEs (BDE-47) to groundwater. The batch and column experiments were conducted to study the co-migration of aluminum hydroxide colloid and BDE-47 in two sand media with particle sizes of 2-4.75 and 0.15 mm. The results indicated that the colloid significantly increased the transport of BDE-47 to 24.32% and 65.84% in the vadose zone of coarse and fine sand columns, respectively. The adsorption and blocking effect were found to be the two main functions during the co-migration of aluminum hydroxide colloids with BDE-47. Specifically, BDE-47 that adsorbed on colloids moved faster in the coarse porous media, and the breakthrough peak of BDE-47 appeared early in the media at an approximate pore volume of 0.15. In comparison, colloids that adsorbed onto the fine porous media formed a layer that blocked the adsorption of BDE-47 onto the fine porous media. This weakened the protection capacity of the vadose zone and led to a greater than 80% amount of BDE-47 breakthrough to the vadose zone.

Comparison of pollutant source tracking approaches: Heavy metals deposited on urban road surfaces as a case study

A range of source tracking approaches have been developed to identify sources in the environmental pollution research field. A comparison of source tracking approaches is essential for a better understanding and practical applications of these approaches. This study compared the commonly used source tracking approaches, namely positive matrix factorization (PMF), Unmix, flag element ratio (FER), and chemical mass-balance based stochastic approach (SCMD). A case study was illustrated for tracing heavy metals (Pb, Zn, Cr, Cu, and Ni) attached to road deposited sediments, which can significantly influence urban road stormwater quality. The results indicated that the accuracy of PMF and Unmix are affected by the number of chemical species used and whether useful markers can be identified for particular sources. However, this does not have an essential influence on FER and SCMD. PMF and Unmix are easier on data preparation and calculation processes but more difficult for source identification process than FER and SCMD. This study also provided recommendations related to the selection of source tracking approach based on different study scenarios and result requirements. These study results are able to provide important guidance for undertaking effective source tracking and devising environmental pollution mitigations.

Compaction conditions affect the capacity of biochar-amended sand filters to treat road runoff

Amending roadside soil with adsorbents such as biochar can help remove pollutants from road runoff. To maintain soil stability, the roadside soil requires compaction. However, it is unknown how compaction conditions affect the capacity of biochar-augmented roadside biofilters to infiltrate stormwater and remove pollutants. This work examines the effect of compaction conditions on the release of biochar particles disintegrated during compaction, and the change in their capacity to infiltrate stormwater and remove E. coli. The net loss of biochar particles by mobilization with stormwater was insignificant compared to the biochar remained in the filters. The initial release of biochar particles in wet-compacted biochar columns was greater than that in dry-compacted biochar. The results revealed that compaction can affect the release of biochar particles in a series of three-step processes: generation of particles by disintegration of large biochar under compaction, diffusion of particles deposited near grain walls to bulk pore water, and transport and retention of particles in constricted pore paths based on pore water connectivity. Under similar conditions, compost columns released more particles than biochar columns, suggesting biochar is more stable than compost under compaction. E. coli removal in wet-compacted columns was greater than removal in dry-compacted columns, owing to greater pore path connectivity in wet-compacted columns. These results indicate that addition of moisture during compaction can increase contaminant removal, initial particle release, and infiltration capacity of biochar-augmented sand filters for road runoff treatment. The results would help develop design guidelines for roadside stormwater treatment systems that require compaction of filter media.

Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials

Mechanochemical synthesis of nano-biochar by ball-milling technology is gaining attention for the sake of its low-cost and eco-friendly nature. Ball milling as a non-/less-solvent technology can propel environmental sustainability and waste valorization into engineered biochar for advanced applications. Scalable production of biochar nanomaterials with superior properties (e.g., 400-500 m² g^-1 surface area and 0.5-1000 nm pore sizes) enables diverse applications in the field of energy and environment. This review critically evaluates the synthesis, characterization, and application of ball-milled biochar nanomaterials based on the latest findings. Limitations such as feedstock selection, process optimization, product homogeneity and reusability, environmental risks, and sustainability assessment remain challenging for further studies. This work highlights the recent advances on mechanochemical biochar technology and offer insights into opportunities and future prospects related to sustainable and facile synthesis of biochar-based novel materials for achieving sustainable development goals.

Mineralogical evidence of unfavorable geochemical interactions between urban runoff pollutants and filter materials in low-impact systems

We report on the geochemical interactions between a synthetic urban runoff (SUR) and the minerals of materials used in a multi-layered column filter (soil, sand, gravel, and tezontle) at the laboratory scale, which mimicked an unvegetated low-impact development (LID) system. After five 8 h infiltration cycles using the SUR, the average concentrations of Pb and Mn decreased slightly at the column outlet, as did HCO₃^-, SO₄^2-, and Na⁺, whereas Mg increased and Cl^-, Ca²⁺, and K⁺ were only detected at the outlet. The filter materials were comprised of silicates, Mn-bearing oxides (hausmannite and manganite), carbonates (calcite), chlorides (sylvite), and sulfates (anglesite, lanarkite, barite, and epsomite). PHREEQC modeling allowed the identification of the geochemical processes that occurred in the filter. The results showed the removal capacity of the filter materials through the formation of secondary minerals such as rhodochrosite (MnCO₃) and the over-saturation of anglesite (PbSO₄), and also showed that they may mobilize ions from the upper to the interior layers (as Mg²⁺ from epsomite, MgSO₄·7H₂O, and Ba²⁺ from barite, BaSO₄). We highlight the importance of knowing the geological nature of filter materials used in LID systems because they may lead to the geogenic mobilization of toxic contaminants to the environment.

Experimental Study on the Performance Decay of Permeable Asphalt Mixture in Seasonally Frozen Regions under Freeze-Thaw Cycles

This paper focuses on the freeze-thaw cycles (F-T cycles) resistance of porous asphalt mixture (PAM) with different air voids in order to explore the gradation of the PAM suitable for seasonal freezing regions. Three sets of PAMs with 18%, 21%, and 25% air voids were designed. After 0–20 F-T cycles, the effects of F-T cycles on the performance degradation of three groups of PAMs were studied by performing a low-temperature splitting test with acoustic emission technology, a normal temperature splitting test, a compression test, a Cantabro particle loss test, and a dynamic creep test. The results show that the damage process of PAM caused by multiple F-T cycles could be more clearly defined by acoustic emission parameters. In addition, the larger the air void, the smaller its indirect tensile strength and compression strength, and the worse its particle loss resistance and high-temperature stability, which made the adverse effect of F-T cycles more significant. Therefore, the air void of PAM used in seasonal freezing regions is suggested to be less than 21%.