Electrochemical determination of nitroaromatic explosives at boron-doped diamond/graphene nanowall electrodes: 2,4,6-trinitrotoluene and 2,4,6-trinitroanisole in liquid effluents

Paper and nylon based optical tongues with poly(p-phenyleneethynylene)-fluorophores efficiently discriminate nitroarene-based explosives and pollutants

Discrimination of nitroarenes with hydrophobic dyes in a polar (H2O) environment is difficult but possible via a lab-on-chip, with polymeric dyes immobilized on paper or nylon membranes. Here arrays of 12 hydrophobic poly(p-phenyleneethynylene)s (PPEs), are assembled into a chemical tongue to detect/discriminate nitroarenes in water. The changes in fluorescence image of the PPEs when interacting with solutions of the nitroarenes were recorded and converted into color difference maps, followed by cluster analysis methods. The variable selection method for both paper and nylon devices selects a handful of PPEs at different pH-values that discriminate nitroaromatics reliably. The paper-based chemical tongue could accurately discriminate all studied nitroarenes whereas the nylon-based devices represented distinguishable optical signature for picric acid and 2,4,6-trinitrotoluene (TNT) with high accuracy.

Highly sensitive fluorescent explosives detection via SERS: based on fluorescence quenching of graphene oxide@Ag composite aerogels

High fluorescence background poses a substantial challenge to surface-enhanced Raman scattering (SERS), thereby limiting its broader applicability across diverse domains. In this work, silver nanoparticle (Ag NP)-loaded graphene oxide aerogel nanomaterials (GO-Ag ANM) were prepared for sensitive SERS detection of fluorescent explosive 2,4,8,10-tetranitrobenzo-1,3a,6,6a-tetraazapentaenopyridine (BPTAP) by a fluorescence quenching strategy. By harnessing the fluorescence quenching properties of graphene and the localized surface plasmon resonance of silver nanoparticles, the synthesized aerogels exhibited effective fluorescence quenching and Raman enhancement capabilities when employed for BPTAP analysis with 532 nm laser excitation. Significantly, precise control over the loading quantity of silver nanoparticles (Ag NPs) resulted in the remarkable sensitivity of the surface-enhanced Raman scattering (SERS) effect. This method allowed for the detection of fluorescent explosive BPTAP at an extraordinarily low concentration of 1 × 10-7 M. Furthermore, the approach also demonstrated excellent detection capabilities for the dyes R6G, CV, and RhB. This study offers valuable insights for the sensitive detection of fluorescent molecules.

Efficient removal of 2,4,6-trinitrotoluene (TNT) from industrial/military wastewater using anodic oxidation on boron-doped diamond electrodes

With growing public concern about water quality particular focus should be placed on organic micropollutants, which are harmful to the environment and people. Hence, the objective of this research is to enhance the security and resilience of water resources by developing an efficient system for reclaiming industrial/military wastewater and protecting recipients from the toxic and cancerogenic explosive compound-2,4,6-trinitrotoluene (TNT), which has been widely distributed in the environment. This research used an anodic oxidation (AO) process on a boron-doped diamond (BDD) electrode for the TNT removal from artificial and real-life matrices: marine water and treated wastewater. During experiments, TNT concentrations were significantly decreased, reaching the anodic degradation efficiency of above 92% within two hours and > 99.9% after six hours of environmental sample treatment. The presented results show the great potential of AO performed on BDD anodes for full-scale application in the industry and military sectors for TNT removal.

A novel electrochemical sensor based on phosphate-stabilized poly-caffeic acid film in combination with graphene nanosheets for sensitive determination of nitro-aromatic energetic materials

This work offers a novel approach and sensor electrode for electrocatalytic reduction of nitro-aromatic explosives (NAEs). This sensor was created by combining electrochemically reduced graphene nanosheets (GNSs) -through cyclic voltammetric reduction of a graphene oxide colloidal solution- with phosphate-stabilized poly-caffeic acid (pCAF) film-modified glassy carbon electrode (GCE). The poly-caffeic acid-modified nonconductive electrode was stabilized with a H2PO4-/HPO42- phosphate buffer at pH 7 and made conductive. The novel electrode, called phosphate stabilized-GC/GNSs/pCAF, was characterized by electrochemical methods and scanning electron microscopy (SEM). The sensor exhibited high performance for trinitrotoluene (TNT) detection with a linear response between 50 and 500 μg L- 1 and a detection limit of 6 μg L-1. In addition to TNT, precise determinations of NAEs such as 2,4-dinitrotoluene (2,4-DNT), tetryl (2,4,6-trinitrophenyl methyl nitramine), trinitro phenol (TNP or picric acid; PA), 2,4-dinitrophenol (2,4-DNP), and 4-amino dinitrotoluene (4A-DNT, an aerobic bacterial degradation product of TNT) were made using the developed sensor electrode and DPV technique. Simultaneous quantification of TNT and DNT was performed with the aid of a computational technique known as multiple linear regression (MLR). The optimized electrode was resistant to interference effects. Satisfactory results on real samples were obtained by applying the modified electrode to the determination of TNT, tetryl, and TNP in contaminated soil. The validation of the proposed method was made against a literature LC-MS/MS method. A statistical comparison of the obtained results was provided using F- and Student's t-tests.

Design of a versatile and selective electrochemical sensor based on dummy molecularly imprinted PEDOT/laser-induced graphene for nitroaromatic explosives detection

Considering the formidable explosive power and human carcinogenicity of nitroaromatic explosives, the implementation of an accurate and sensitive detection technology is imperative for ensuring public safety and monitoring post-blast environmental contamination. In the present work, a versatile and selective electrochemical sensor based on dummy molecularly imprinted poly (3,4-ethylenedioxythiophene)/laser-induced graphene (MIPEDOT/LIG) was successfully developed and the specific detection of multiple nitroaromatic explosives was realized in the single sensor. The accessible and nontoxic trimesic acid (TMA) and superior 3, 4-ethylenedioxythiophene (EDOT) were selected as the dummy-template and the functional monomer, respectively. The interaction between the functional monomer and the template, and the morphology, electrochemical properties and detection performance of the sensor were comprehensively investigated by ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, cyclic voltammetry, and differential pulse voltammetry. Benefiting from the alliance of TMA and EDOT, the MIPEDOT/LIG sensor manifested outstanding selectivity and sensitivity for 2,4,6-trinitrotolueen (TNT), 2,4,6-trinitrophenol (TNP), 2,4-dinitrotoluene (DNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrophenol (DNP), and 1,3-dinitrobenzene (DNB) (representative nitroaromatic explosives) with limits of determination of 1.95 ppb, 3.06 ppb, 2.49 ppb, 1.67 ppb, 1.94 ppb, and 4.56 ppb, respectively. The sensor also exhibited extraordinary reliability and convenience for environmental sample detection. Therefore, a perfect combination of versatility and selectivity in the MIPEDOT/LIG sensor was achieved. The findings of this work provide a new direction for the development of multi-target electrochemical sensors using a versatile dummy template for explosives detection.

A novel 3D-printed graphite/polylactic acid sensor for the electrochemical determination of 2,4,6-trinitrotoluene residues in environmental waters

Here, lab-made graphite and polylactic acid (Gpt-PLA) biocomposite materials were used to additively manufacture electrodes via the fused deposition modeling (FDM) technique for subsequent determination of the explosive 2,4,6-trinitrotoluene (TNT, considered a persistent organic pollutant). The surface of the 3D-printed material was characterized by SEM and Raman, which revealed high roughness and the presence of defects in the graphite structure, which enhanced the electrochemical response of TNT. The 3D-printed Gpt-PLA electrode coupled to square wave voltammetry (SWV) showed suitable performance for fastly determining the explosive residues (around 7 s). Two reduction processes at around -0.22 V and -0.36 V were selected for TNT detection, with linear ranges between 1.0 and 10.0 μM. Moreover, detection limits of 0.52 and 0.66 μM were achieved for both reduction steps. The proposed method was applied to determine TNT in different environmental water samples (tap water, river water, and seawater) without a dilution step (direct analysis). Recovery values between 98 and 106% confirmed the accuracy of the analyses. Additionally, adequate selectivity was achieved even in the presence of other explosives commonly used by military agencies, metallic ions commonly found in water, and also some electroactive camouflage species. Such results indicate that the proposed device is promising to quantify TNT residues in environmental samples, a viable on-site analysis strategy.

(1-(4-(5-Phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-Bisfunctionalized 3- and 4-PEG: Synthesis and Photophysical Studies

Two new azaheterocycle-based bolas, such as (1-(4-(5-phenyl-1,3,4-oxadiazol-2-yl)phenyl)-1H-1,2,3-triazol-4-yl)-methylenyls α,ω-bisfunctionalized PEGs, were prepared via Cu-catalyzed click reaction between 2-(4-azidophenyl)-5-(aryl)-oxadiazole-1,3,4 and terminal ethynyls derived from PEG-3 and PEG-4. Due to the presence of two heteroaromatic cores and a PEG linker, these bola molecules are considered as promising fluorescent chemosensors for electron-deficient species. As a result of a well-pronounced "turn-off" fluorescence response towards common nitro-explosive components, such as 2,4-dinitrotoluene (DNT) and 2,4,6-trinitrotoluene (TNT), hard-to-detect pentaerythritol tetranitrate (PETN), as well as Hg²⁺ cation was observed.

Sensitive and selective impedimetric determination of TNT using RSM-CCD optimization

Detection of trace amounts of 2,4,6-Trinitrotoluene as a widely used explosive in the military and industrial sectors is of vital importance due to security and environmental concerns. The sensitive and selective measurement characteristics of the compound still is considered a challenge for analytical chemists. Unlike conventional optical and electrochemical methods, the electrochemical impedance spectroscopy technique (EIS), has a very high sensitivity, but it faces a significant challenge in that it requires complex and expensive steps to modify the electrode surface with selective agents. We reported the design and construction of an inexpensive, simple, sensitive, and selective impedimetric electrochemical TNT sensor based on the formation of a Meisenheimer complex between magnetic multiwalled carbon nanotubes modified with aminopropyl triethoxysilane (MMWCNTs @ APTES) and TNT. The formation of the mentioned charge transfer complex at the electrode-solution interface blocks the electrode surface and disrupts the charge transfer in [(Fe (CN) ₆)] ^3-/4- redox probe system. Charge transfer resistance changes (ΔR_CT) were used as an analytical response that corresponded to TNT concentration. To investigate the influence of effective parameters on the electrode response, such as pH, contact time, and modifier percentage, the response surface methodology based on central composite design (RSM-CCD) was used. The calibration curve was achieved in the range of 1-500 nM with a detection limit of 0.15 nM under optimal conditions, which included pH of 8.29, contact time of 479 s, and modifier percentage of 12.38% (w/w). The selectivity of the constructed electrode towards several nitroaromatic species was investigated, and no significant interference was found. Finally, the proposed sensor was able to successfully measure TNT in various water samples with satisfactory recovery percentages.

Chemical reduction as a facile colorimetric approach for selective TNT detection by spectrophotometry and photothermal lens spectroscopy

In this study, the simple determination of TNT is achieved through the vivid stable red color products generated after chemically reduction by NaBH₄ as a common and accessible reducing/colorimetric reagent. Some other nitroaromatics were impressed under reduction reaction and led to the colorful products. The color of these reduced nitroaromatics were unstable and approximately vanished after some few minutes which ameliorated the selectivity in TNT determination. Utilizing the time-dependent selectivity, the method was applied specifically for discriminating of TNT from other nitroaromatic compounds (NACs). UV-vis spectrophotometry and photothermal lens spectrometry were employed as detection techniques. The former was simpler and more available in various laboratories while the latter provides higher sensitivity. It was revealed that the photothermal lens responses were linear from 2.0 to 55.0 nM with a limit of detection (LOD) of about 0.8 nM. The LOD of the photothermal lens measurement were found to be 241 times lower than that of the UV-vis spectrophotometry in TNT quantification. The evolved method was successfully carried out for TNT vapor determination after trapping into the colorimetric reagent. The recoveries and relative standard deviations (RSD, n = 3) calculated for 3 gas samples were ≥91% and ≤7%, respectively.

Enhancement of electrochemical detection performance towards 2,4,6-trinitrotoluene by a bottom layer of ZnO nanorod arrays

The ZnO nanostructure layers have been widely investigated as electrodes for sensors due to their intrinsic advantages such as high active area and low cost. In this work, to enhance the detection properties of ZnO nanostructural electrodes, self-organized ZnO nanorod arrays were synthesized using the chemical bath deposition (CBD) method on FTO glasses and ZnO nanoparticles. The fabricated ZnO electrodes on the two different substrates were characterized by SEM, TEM, XRD, and XPS. Subsequently, the detection performance of ZnO nanorod electrodes was electrochemically measured in a 2,4,6-trinitrotoluene (2,4,6-TNT) solution by CV and EIS. The differences in current densities between the ZnO electrodes were determined by the width of the ZnO nanorods, resulting in a ∼45% higher detection efficiency with F-CBD (the ZnO nanorods on FTO) electrodes compared to S-CBD (the ZnO nanorods on ZnO nanoparticles) electrodes.

Miniaturized 3D printed electrochemical platform with optimized Fibrous carbon electrode for non-interfering hypochlorite sensing

3D printing technology based electrochemical device can provide ease of fabrication, cost effectiveness, rapid detection and lower limit of detection. Herein, a novel, customized, portable and inexpensive 3D printed electrochemical device, has been presented. Fibrous carbon Toray paper, deposited with gold nanoparticles through electrodeposition, used as a working electrode which Further device was tested with 1 mM sodium hypochlorite using cyclic voltammetry (CV) and square wave voltammetry (SWV) in 0.1 M PBS. Hypochlorite has a pivotal role in supporting the growing chemical and paper industries and finds diverse uses in several clinical applications. It is primarily used for disinfecting food, water and surfaces. The scan rate study was carried out from 20 mVs^-1 to 250 mVs^-1 using cyclic voltammetry technique. The diffusion coefficient obtained from scan rate effect was 1.39 × 10^-6 cm²s^-1. The concentration range was evaluated with SWV technique, in a linear range of 0.6 μM-40 μM, with a detection limit of 0.7 μM. The device was further analyzed to ensure non-interference from co-existing chemicals like sodium chloride, potassium nitrate, sodium carbonate, sodium nitrite. Real sample analysis was done with sea, artificial sea and tap water with impressive recovery values. In summary, the developed working electrode can be customized and modified based on testing analyte; thus, the proposed device can be used for various other biochemical analytes.

Investigation of Chemosensing and Color Properties of Schiff Base Compounds Containing a 1,2,3-triazole Group

A series of Schiff base compounds (ER¹-ER⁵) containing a 1,2,3-triazole and carboxylic acid groups were synthesized and their chemosensory properties towards anions (I^-, CO₃^2-, SO₄^2-, NO₂^-, NO₃^-, CH₃COO^-, ClO₃^-, CNO^-, N₃^-) and cations (Al³⁺, Ag⁺, Co²⁺, Cr³⁺, Cu²⁺, Fe³⁺, Hg²⁺, Mn²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺). The compounds were also used as fluorescence probs for the detection of nitroaromatic compounds. The structural characterization of the synthesized compounds was elucidated using methods such as FT-IR, UV, FL, LC-MS, MALDI-TOF MS, ¹H(¹³C) NMR. The effect of substitute groups (-CH₃, -OCH₃, -OH, -Cl and -Br) on the synthesized Schiff bases (ER¹-ER⁵) on the chemosensory properties were compared. As the groups changed, the sensor and quenching effects of the molecule against anions and cations changed. Compound ER³ having methoxy (OCH₃) group exhibited selective sensor properties against Fe³⁺ ion while compound ER⁵ with a chloride substitute (Cl) group showed selectivity for Cr³⁺ ion under 254 nm UV-lamp. The substitute effect was also observed for the sensing of anions. Under 254 nm UV-lamp, ER² having the -OH group has a selective sensing property for CNO^- and ER⁴ with the bromide (Br) group exhibited selectivity for N₃^- ion. The synthesized Schiff base compounds were also tested as fluorescence probs for the sensing of some nitroaromatic explosives.

Optical gas sensor based on the combination of a QD photoluminescent probe and a QD photodetector

We report on a sensor architecture for detection of hazardous gases. The proposed device is based on the integration of a solid-state quantum dot (QD) photoluminescent probe with a QD photodetector on the same substrate. The effectiveness of the approach is demonstrated by developing a compact optical sensor for trace detection of explosives in air. The proposed architecture is very simple and consists of a silicon substrate with both surfaces coated with QD films. The upper layer acts as photoluminescent probe, pumped by a blue LED. The change of photoluminescence intensity associated to the interaction between the QDs and the target analyte is measured by the QD photodetector fabricated on the opposite side of the substrate. The sensor is mounted into a small chamber provided with the LED and the front-end electronics. The device is characterized by using nitrobenzene as representative nitroaromatic compound. Extremely low concentrations (down to 0.1 ppm) can be detected by the proposed device, with a theoretical detection limit estimated to be as low as 2 ppb. Results are repeatable and no ageing effect is observed over a 70 d period. The proposed architecture may provide a promising solution for explosive detection in air as well as other sensing applications, thanks to its sensitivity, simple fabrication process, practical usability and cost effectiveness.

Tailoring Diffusional Fields in Zwitterion/Dopamine Copolymer Electropolymerized at Carbon Nanowalls for Sensitive Recognition of Neurotransmitters

The importance of neurotransmitter sensing in the diagnosis and treatment of many psychological illnesses and neurodegenerative diseases is non-negotiable. For electrochemical sensors to become widespread and accurate, a long journey must be undertaken for each device, from understanding the materials at the molecular level to real applications in biological fluids. We report a modification of diamondized boron-doped carbon nanowalls (BCNWs) with an electropolymerized polydopamine/polyzwitterion (PDA|PZ) coating revealing tunable mechanical and electrochemical properties. Zwitterions are codeposited with PDA and noncovalently incorporated into a structure. This approach causes a specific separation of the diffusion fields generated by each nanowall during electrochemical reactions, thus increasing the contribution of the steady-state currents in the amperometric response. This phenomenon has a profound effect on the sensing properties, leading to a 4-fold enhancement of the sensitivity (3.1 to 14.3 μA cm^-2 μM^-1) and a 5-fold decrease of the limit of detection (505 to 89 nM) in comparison to the pristine BCNWs. Moreover, as a result of the antifouling capabilities of the incorporated zwitterions, this enhancement is preserved in bovine serum albumin (BSA) with a high protein concentration. The presence of zwitterion facilitates the transport of dopamine in the direction of the electrode by intermolecular interactions such as cation-π and hydrogen bonds. On the other hand, polydopamine units attached to the surface form molecular pockets driven by hydrogen bonds and π-π interactions. As a result, the intermediate state of dopamine-analyte oxidation is stabilized, leading to the enhancement of the sensing properties.

Conductive printable electrodes tuned by boron-doped nanodiamond foil additives for nitroexplosive detection

An efficient additive manufacturing-based composite material fabrication for electrochemical applications is reported. The composite is composed of commercially available graphene-doped polylactide acid (G-PLA) 3D printouts and surface-functionalized with nanocrystalline boron-doped diamond foil (NDF) additives. The NDFs were synthesized on a tantalum substrate and transferred to the 3D-printout surface at 200 °C. No other electrode activation treatment was necessary. Different configurations of low- and heavy-boron doping NDFs were evaluated. The electrode kinetics was analyzed using electrochemical procedures: cyclic voltammetry and electrochemical impedance spectroscopy. The quasi-reversible electrochemical process was reported in each studied case. The studies allowed confirmation of the CV peak-to-peak separation of 63 mV and remarkably high heterogeneous electron transfer rate constant reaching 6.1 × 10⁻² cm s⁻¹ for 10 k ppm [B]/[C] thin NDF fitted topside at the G-PLA electrode. Differential pulse voltammetry was used for effective 2,4,6-trinitrotoluene (TNT) detection at the studied electrodes with a 87 ppb limit of detection, and wide linearity range between peak current density and the analyte concentration (0.064 to 64 ppm of TNT). The reported electrode kinetic differences originate primarily from the boron-dopant concentration in the diamond and the various contents of the non-diamond carbon phase.

Electrochemical determination of nitroaromatic explosives using glassy carbon/multi walled carbon nanotube/polyethyleneimine electrode coated with gold nanoparticles

The on site/in field detection of explosives has become a rising priority for homeland security and counter-terrorism measures. This work presents the sensitive detection of nitroaromatic explosives using glassy carbon/multi-walled carbon nanotubes/polyethyleneimine (GC/MWCNTs/PEI) electrode coated with gold nanoparticles (AuNPs). MWCNTs and PEI could be well dispersed in ethanol/water solution, giving rise to a thin and homogeneous film on GCE. The GC/MWCNTs/PEI electrode was electrochemically modified with AuNPs and used for the differential pulse voltammetric (DPV) detection of nitroaromatics. The enhanced detection sensitivities were achieved through π-π and charge-transfer (CT) interactions between the electron-deficient nitroaromatic explosives and donor amine groups in PEI to which gold nanoparticles were linked, providing increased analyte affinity toward the modified GCE. Calibration curves of current intensity versus concentration were linear in the range of 0.05-8 mg L^-1 for TNT, 0.2-4 mg L^-1 for 2,4-dinitrotoluene (DNT), 1-20 mg L^-1 for 2,4-dinitrophenol (2,4-DNP), 0.25-10 mg L^-1 for picric acid (PA), and 0.05-4 mg L^-1 for 2,4,6-trinitrophenyl-N-methylnitramine (tetryl) with detection limits (LOD) of 15 μg L^-1, 45 μg L^-1, 135 μg L^-1, 30 μg L^-1, and 12 μg L^-1, respectively. The proposed method was successfully applied to the analysis of nitroaromatics in synthetic explosive mixtures and military composite explosives (comp B and octol). The electrochemical method was not affected by possible interferents of electroactive camouflage materials and common soil ions. Method validation was performed against the reference LC-MS method on TNT and PA-contaminated clay soil samples separately.

Reduced graphene oxide-supported smart plasmonic AgPtPd porous nanoparticles for high-performance electrochemical detection of 2,4,6-trinitrotoluene

Smart plasmonic AgPtPd NPs/rGO exhibited a wide linear range for TNT from 0.1 to 8 ppm with a sensing limit of 0.95 ppb. The remarkable features are probably attributed to the integrated advantages of the plasmonic properties and synergistic effect.

Mixed sp2-sp3 Nanocarbon Materials: A Status Quo Review

Carbon nanomaterials with a different character of the chemical bond-graphene (sp2) and nanodiamond (sp3)-are the building bricks for a new class of all-carbon hybrid nanomaterials, where the two different carbon networks with sp3 and sp2 hybridization coexist, interacting and even transforming into one another. The extraordinary physiochemical properties defined by the unique electronic band structure of the two border nanoallotropes ensure the immense application potential and versatility of these all-carbon nanomaterials. The review summarizes the status quo of sp2 - sp3 nanomaterials, including graphene/graphene-oxide-nanodiamond composites and hybrids, graphene/graphene-oxide-diamond heterojunctions, and other sp2-sp3 nanocarbon hybrids for sensing, electronic, and other emergent applications. Novel sp2-sp3 transitional nanocarbon phases and architectures are also discussed. Furthermore, the two-way sp2 (graphene) to sp3 (diamond surface and nanodiamond) transformations at the nanoscale, essential for innovative fabrication, and stability and chemical reactivity assessment are discussed based on extensive theoretical, computational and experimental studies.

Boron-Doped Diamond Electrodes: Recent Developments and Advances in View of Electrochemical Drug Sensors

Conductive boron-doped diamond (BDD), in addition to its superior material properties, offers many important advantages that make it an interesting material for electroanalytical studies. It has been considered as an excellent electrode material for electrooxidation of drug active compounds in their dosage forms or in biological materials due to its good physical and chemical properties. It contains not only the largest solvent working potential window compared to other electrode materials, but also it has low background and capacitive currents; lower problems with passivation and it has the ability to withstand extreme potentials, corrosive, and high temperature/pressure environments. The aim of this review is not only to provide a state-of-the-art of diamond electrochemistry but also to serve as a reference point for any researcher wishing to commence work with diamond electrodes and understand electrochemical data. Therefore, it is focused on the carbon-based materials, electrochemical properties of the BDD film electrode, its fundamental research, and its electrochemical pretreatment process are discussed in detail. In this case, there are important studies to show the effective BDD drug sensors for the detection and determination of drugs and the present review critically summarizes the available data in this field between 2015 and 2020.

Carbon nanoarchitectures as high-performance electrodes for the electrochemical oxidation of landfill leachate

Nanomaterials and assemblies of the aforementioned into complex architectures constitute an opportunity to design efficient and selective solutions to widespread and emerging environmental issues. The limited disposal of organic matter in modern landfills generates extremely concentrated leachates characterised by high concentrations of refractory compounds. Conventional biochemical treatment methods are unsuitable, while advanced treatment, such coagulation, reverse osmosis and ultrafiltration can be very costly and generate additional waste. Electrochemical oxidation is an established technique to efficiently mineralise a plethora of recalcitrant pollutants, however the selectivity and efficiency of the process are strongly related to the anode material. For this reason, a nanoarchitectured carbon material has been designed and synthesised to improve the capability of the anode towards the adsorption and decomposition of pollutants. Instead of simple nanostructures, intelligently engineered nanomaterials can come in handy for more efficient advanced treatment techniques. In this study, a carbon nanoarchitecture comprising boron-doped vertically aligned graphene walls (BCNWs) were grown on a boron-doped diamond (BDD) interfacial layer. The results show how the peculiar maze-like morphology and the concurrence of different carbon hybridisations resulted in a higher current exchange density. The BDD performed better for the removal of NH₄⁺ while the BCNW-only sample exhibited a faster deactivation. The BDD/BCNW nanoarchitecture resulted in an enhanced COD removal and a NH₄⁺ removal similar to that of BDD, without the intermediate production of NO₂^- and NO₃^-.

Recent Developments in the Field of Explosive Trace Detection

Explosive trace detection (ETD) technologies play a vital role in maintaining national security. ETD remains an active research area with many analytical techniques in operational use. This review details the latest advances in animal olfactory, ion mobility spectrometry (IMS), and Raman and colorimetric detection methods. Developments in optical, biological, electrochemical, mass, and thermal sensors are also covered in addition to the use of nanomaterials technology. Commercially available systems are presented as examples of current detection capabilities and as benchmarks for improvement. Attention is also drawn to recent collaborative projects involving government, academia, and industry to highlight the emergence of multimodal screening approaches and applications. The objective of the review is to provide a comprehensive overview of ETD by highlighting challenges in ETD and providing an understanding of the principles, advantages, and limitations of each technology and relating this to current systems.

Ultrasensitive Detection of Tetracycline Using Boron and Nitrogen Co-Doped Graphene Quantum Dots from Natural Carbon Source as the Paper-Based Nanosensing Probe in Difference Matrices

Herein, the boron and nitrogen co-doped 0-dimensional graphene quantum dots (B,N-GQDs) with high quantum yield (QY) were synthesized via microwave-assisted hydrothermal method at 170 °C for 20 min using fresh passion fruit juice and boric acid as the starting materials. The 3–6 layers of B,N-GQDs with mean particle size of 9 ± 1 nm were then used for ultra-sensitive and selective detection of tetracycline in aqueous and biological media. The hybridization of boron and nitrogen atoms into the GQD structures increases the intensity of electronegative, resulting in the enhancement of QY to 50 ± 1%. The B,N-GQDs show their excellent analytical performance on tetracycline determination after 2 min of reaction under an optimal condition at pH 5. The linear range of 0.04–70 µM and with limits of detection (LOD) of 1 nM in phosphate buffer saline (PBS), 1.9 nM in urine and 2.2 nM in human serum are obtained. Moreover, the high selectivity of tetracycline by B,N-GQDs over the other 23 interferences is observed. The π-π interaction and electron donor-acceptor principle play pivotal roles in enhancing the ultra-sensitivity and selectivity of B,N-GQDs toward TC detection. Moreover, the B, N-GQD based paper nanosensor exhibits an excellent analytical performance on visual detection of 0.1–30 µM TC in human serum. Results of this study clearly indicate the feasibility of synthesis of B,N-GQDs derived from passion fruit juice for ultrasensitive tetracycline detection, which can open an avenue to use natural products for the preparation of environmentally benign and biocompatible carbon nanomaterials for highly sensitive detection of drugs, antibiotics, organic compounds and biomarkers.

Prototype of Nitro Compound Vapor and Trace Detector Based on a Capacitive MIS Sensor

A prototype of a nitro compound vapor and trace detector, which uses the pyrolysis method and a capacitive gas sensor based on the metal–insulator–semiconductor (MIS) structure type Pd–SiO₂–Si, was developed and manufactured. It was experimentally established that the detection limit of trinitrotoluene trace for the detector prototype is 1 × 10⁻⁹ g, which corresponds to concentration from 10⁻¹¹ g/cm³ to 10⁻¹² g/cm³. The prototype had a response time of no more than 30 s. The possibility of further improving the characteristics of the prototype detector by reducing the overall dimensions and increasing the sensitivity of the MIS sensors is shown.