Efficient degradation of bisphenol A in water by heterogeneous activation of peroxymonosulfate using highly active cobalt ferrite nanoparticles

Constructing High-Performance Cobalt-Based Environmental Catalysts from Spent Lithium-Ion Batteries: Unveiling Overlooked Roles of Copper and Aluminum from Current Collectors

Converting spent lithium-ion batteries (LIBs) cathode materials into environmental catalysts has drawn more and more attention. Herein, we fabricated a Co3O4-based catalyst from spent LiCoO2 LIBs (Co3O4-LIBs) and found that the role of Al and Cu from current collectors on its performance is nonnegligible. The density functional theory calculations confirmed that the doping of Al and/or Cu upshifts the d-band center of Co. A Fenton-like reaction based on peroxymonosulfate (PMS) activation was adopted to evaluate its activity. Interestingly, Al doping strengthened chemisorption for PMS (from -2.615 eV to -2.623 eV) and shortened Co-O bond length (from 2.540 Å to 2.344 Å) between them, whereas Cu doping reduced interfacial charge-transfer resistance (from 28.347 kΩ to 6.689 kΩ) excepting for the enhancement of the above characteristics. As expected, the degradation activity toward bisphenol A of Co3O4-LIBs (0.523 min-1) was superior to that of Co3O4 prepared from commercial CoC2O4 (0.287 min-1). Simultaneously, the reasons for improved activity were further verified by comparing activity with catalysts doped Al and/or Cu into Co3O4. This work reveals the role of elements from current collectors on the performance of functional materials from spent LIBs, which is beneficial to the sustainable utilization of spent LIBs.

Single Atom Catalyst in Persulfate Oxidation Reaction: From Atom Species to Substance

With maximum utilization of active metal sites, more and more researchers have reported using single atom catalysts (SACs) to activate persulfate (PS) for organic pollutants removal. In SACs, single metal atoms (Fe, Co, Cu, Mn, etc.) and different substrates (porous carbon, biochar, graphene oxide, carbon nitride, MOF, MoS2, and others) are the basic structural. Metal single atoms, substances, and connected chemical bonds all have a great influence on the electronic structures that directly affect the activation process of PS and degradation efficiency to organic pollutants. However, there are few relevant reviews about the interaction between metal single atoms and substances during PS activation process. In this review, the SACs with different metal species and substrates are summarized to investigate the metal-support interaction and evaluate their effects on PS oxidation reaction process. Furthermore, how metal atoms and substrates affect the reactive species and degradation pathways are also discussed. Finally, the challenges and prospects of SACs in PS-AOPs are proposed.

Activation of periodate by biocarbon-supported multiple modified nanoscale iron for the degradation of bisphenol A in high-temperature aqueous solution

As reported, the persistent toxic and harmful pollutant bisphenol A (BPA) from industrial emissions has been consistently found in aquatic environments inhabited by humans. Periodate (PI)-based advanced oxidation processes (AOPs) have been employed to degrade BPA, although activating PI proves more challenging compared to other oxidants. A novel nano iron metal catalyst, sulfided nanoscale iron-nickel bimetallic nanoparticle supported on biocarbon (S-(nFe0-Ni)/BC) was synthesized and utilized to activate PI for the removal of BPA. The morphology, structure, and composition of S-(nFe0-Ni)/BC were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy-energy dispersive spectrometer (SEM-EDS), and fourier-transform infrared spectrum (FTIR). The catalyst demonstrates an excellent ability to activate PI, achieving a BPA removal efficacy of 86.4%, accompanied by a 33% reduction in total organic carbon (TOC) in the {S-(nFe0-Ni)/BC}/PI system. BPA degradation exhibited a significant change at the 5-min mark. In the first stage (0-5 min), nonlinear dynamic fitting research, combined with scavenging experiments, unveiled the competitive degradation of pollutants primarily driven by iodate radical ( IO 3 · ), singlet oxygen1 O 2 , and hydroxyl radical ( · OH ). The competitive dynamics aligned with the ExpAssoc model. The contribution rates of different active species during the second stage (5-120 min) were calculated. The contributions of main species to BPA removal follow the order of IO 3 · >1 O 2 > · OH throughout the entire process. The influence of various parameters, such as the dosage of S-(nFe0-Ni)/BC, initial PI concentration, BPA concentration, pH, temperature, and the presence of coexisting anions, was also examined. Finally, a plausible reaction mechanism in the system is proposed, suggesting that the {S-(nFe0-Ni)/BC}/PI system involves a heterogeneous synergistic reaction occurring primarily on the surface of S-(nFe0-Ni)/BC. Therefore, this study proposes a promising approach for PI-based AOPs to degrade organic pollutants, aiming to mitigate the irreversible harm caused by such pollutants to organisms and the environment.

Enhanced degradation of Direct Red 80 dye via Fenton-like process mediated by cobalt ferrite: generated superoxide radicals and singlet oxygen

Azo dyes, widely used in the textile industry, contribute to effluents with significant organic content. Therefore, the aim of this work was to synthesize cobalt ferrite (CoFe2O4) using the combustion method and assess its efficacy in degrading the azo dye Direct Red 80 (DR80). TEM showed a spherical structure with an average size of 33 ± 12 nm. Selected area electron diffraction and XRD confirmed the presence of characteristic crystalline planes specific to CoFe2O4. The amount of Co and Fe metals were determined by ICP-OES, indicating an n(Fe)/n(Co) ratio of 2.02. FTIR exhibited distinct bands corresponding to Co-O (455 cm-1) and Fe-O (523 cm-1) bonds. Raman spectroscopy detected peaks associated with octahedral and tetrahedral sites. For the first time, the material was applied to degrade DR80 in an aqueous system, with the addition of persulfate. Consistently, within 60 min, these trials achieved nearly 100% removal of DR80, even after the material had undergone five cycles of reuse. The pseudo-second-order model was found to be the most fitting model for the experimental data (k2 = 0.07007 L mg-1 min-1). The results strongly suggest that degradation primarily occurred via superoxide radicals and singlet oxygen. Furthermore, the presence of UV light considerably accelerated the degradation process (k2 = 1.54093 L mg-1 min-1). The material was applied in a synthetic effluent containing various ions, and its performance consistently approached 100% in the photo-Fenton system. Finally, two degradation byproducts were identified through HPLC-MS/MS analysis.

Double pyramid stacked CoO nano-crystals induced by graphene at low temperatures as highly efficient Fenton-like catalysts

Transition metal oxides are widely used as Fenton-like catalysts in the treatment of organic pollutants, but their synthesis usually requires a high temperature. Herein, an all-solid-state synthesis method controlled by graphene was used to prepare a double pyramid stacked CoO nano-crystal at a low temperature. The preparation temperature decreased by 200 °C (over 30% reduction) due to the introduction of graphene, largely reducing the reaction energy barrier. Interestingly, the corresponding degradation rate constants (kobs) of this graphene-supported pyramid CoO nano-crystals for organic molecules after their adsorption were over 2.5 and 35 times higher than that before adsorption and that of free CoO, respectively. This high catalytic efficiency is attributed to the adsorption of pollutants at the surface by supporting graphene layers, while free radicals activated by CoO can directly and rapidly contact and degrade them. These findings provide a new strategy to prepare low carbon-consuming transition metal oxides for highly efficient Fenton-like catalysts.

Confined Co@NCNTs as highly efficient catalysts for activating peroxymonosulfate: free radical and non-radical co-catalytic mechanisms

A series of transition metal (Co, Ni, Fe) nanoparticles were confined in N-doped carbon nanotubes (NCNTs) prepared (Co@NCNTs, Ni@NCNTs, and Fe@NCNTs) by the polymerization method. The structure and composition of catalysts were well characterized. The catalytic activity of catalysts for activating peroxymonosulfate (PMS) was conducted via acid orange 7 (AO7) degradation. Among the catalysts, Co@NCNTs performed the best catalytic activity. Additionally, Co@NCNTs performed good catalytic activity in pH values of 2.39-10.98. Cl- and SO42- played a promoting roles in AO7 degradation. NO3- presented a weak effect on the catalytic performance of Co@NCNTs, while HCO3- and CO32- significantly suppressed the catalytic performance of Co@NCNTs. Both non-radical (1O2 and electron transfer) and free-radical (·OH and SO4·-) pathways were detected in the Co@NCNTs/PMS system. Notably, 1O2 was identified to be the main active specie in this study. The catalytic activity of Co@NCNTs gradually decreased after cycle reuse of Co@NCNTs. Finally, the toxicity of the AO7 degradation solution in the study was evaluated by Chlorella pyrenoidosa.

Insights into the mechanism of multiple Cu-doped CoFe2O4 nanocatalyst activated peroxymonosulfate for efficient degradation of Rhodamine B

The multiple metal catalyst as a promising nanomaterial has shown excellent activity in the peroxymonosulfate (PMS) activation for pollutant degradation. However, the role of special sites and in-depth understanding of the PMS activation mechanism are not fully studied. In this study, a Cu-doped CoFe2O4 nanocatalyst (0.5CCF) was synthesized by a sol-gel and calcination method, and used for PMS activation to remove Rhodamine B (RhB). The results showed that the Cu doping obviously enhanced the catalytic performance of CoFe2O4, with 99.70% of RhB removed by 0.5CCF while 74.91% in the CoFe2O4 within 15 min. Based on the X-ray photoelectron spectroscopy and electrochemical analysis, this could be ascribed to the more low valence of Co and Fe species generated on the 0.5CCF and faster electron transfers occurred in the 0.5CCF due to the Cu doping. In addition, Cu doping could provide more reaction sites for the 0.5CCF to activate PMS for RhB removal. The metal species and the surface hydroxyl were the reaction sites of PMS activation, and the surface hydroxyl played an important role in surface-bound reactive species generation. During the PMS activation, the Cu not only activated PMS to produce reactive oxygen species (ROS), but also regenerated Co2+ and Fe2+ to accelerate the PMS activation. The non-radical of 1O2 was the main ROS with a 99.35% of contribution rate, and the SO5•- self-reaction was its major source. This study provides a new insight to enhance the PMS activation performance of multiple metal catalysts by Cu doping in wastewater treatment.

Singlet oxygen: Properties, generation, detection, and environmental applications

Singlet oxygen (1O2) is molecular oxygen in the excited state with high energy and electrophilic properties. It is widely found in nature, and its important role is gradually extending from chemical syntheses and medical techniques to environmental remediation. However, there exist ambiguities and controversies regarding detection methods, generation pathways, and reaction mechanisms which have hindered the understanding and applications of 1O2. For example, the inaccurate detection of 1O2 has led to an overestimation of its role in pollutant degradation. The difficulty in detecting multiple intermediate species obscures the mechanism of 1O2 production. The applications of 1O2 in environmental remediation have also not been comprehensively commented on. To fill these knowledge gaps, this paper systematically discussed the properties and generation of 1O2, reviewed the state-of-the-art detection methods for 1O2 and long-standing controversies in the catalytic systems. Future opportunities and challenges were also discussed regarding the applications of 1O2 in the degradation of pollutants dissolved in water and volatilized in the atmosphere, the disinfection of drinking water, the gas/solid sterilization, and the self-cleaning of filter membranes. This review is expected to provide a better understanding of 1O2-based advanced oxidation processes and practical applications in the environmental protection of 1O2.

FeS and Fe3O4 Co-modified biochar to build a highly resistant advanced oxidation process system for quinclorac degradation in irrigation water

Advanced oxidation processes (AOPs), based on sulfate radical (SO4·-) produced by peroxymonosulfate (PMS), can effectively mineralize refractory organic pollutants. However, the coexistence of anions and natural organic matters in actual wastewater prevents the application of AOPs. A simple one-step method was used to prepare FeS/Fe3O4 co-modified biochar materials (FFB) that could activate PMS to degrade quinclorac (QNC) with a removal rate of 100%, even exhibiting optimum degradation of QNC reached 99.31% in irrigation water, demonstrating excellent anti-interference performance for co-existing anions and natural organic matter. Meanwhile, ecotoxicity analysis showed that the toxicity of degradation intermediates was lower than that of QNC. Characterization results demonstrated the even distribution of FeS and Fe3O4 onto biochar, supplying abundant Fe2+ to activate PMS producing reactive oxygen species (ROS), while the generated Fe3+ after reactive continue to be reduced with sulfur species to promote the cycle of Fe2+/Fe3+. The coexistence of ·OH, SO4·-, 1O2, and O2·- in the FFB/PMS-QNC system suggest the possession of two pathway with free radical and non-free radical pathways to degrade QNC. The density functional theory (DFT) was used to analyze the adsorption sites and adsorption energy of PMS, as well as the differential charge density, which further proved the generation of SO4·-, O2·- and 1O2. In addition, the electrochemical test results showed that electron transfer also played an important role in the degradation of QNC. This study provides a feasible approach for the removal of organic pollutants in actual water.

Oxygen doped graphite carbon nitride as efficient metal-free catalyst for peroxymonosulfate activation: Performance, mechanism and theoretical calculation

In this study, oxygen-doped graphitic carbon nitride (g-C3N4), named O-g-C3N4, was successfully fabricated and characterized, and its performance in activating peroxymonosulfate (PMS, HSO5-) for the removal of phenol, 2,4-dichlorophenol (2,4-DCP), bisphenol A (BPA), rhodamine B (RhB), reactive brilliant blue (RBB) and acid orange 7 (AO7) was evaluated. The catalytic performance of O-g-C3N4 for AO7 removal increased by 14 times compared to g-C3N4. In the presence of 0.2 g L-1 O-g-C3N4, 3.5 mM PMS at natural pH 5.8, 96.4% of AO7 could be removed in 60 min, reduced toxicity of the treated AO7 solution was obtained, and the mineralization efficiency was 47.2% within 120 min. Density functional theory (DFT) calculations showed that the charge distribution changed after oxygen doping, and PMS was more readily adsorbed by O-g-C3N4 with the adsorption energy (Eads) of -0.855 kcal/mol than that of the pristine g-C3N4 (Eads: -0.305 kcal/mol). Mechanism investigation implied that AO7 was primarily removed by the sulfate radicals (SO4•-) and hydroxyl radicals (•OH) on the surface of O-g-C3N4, but the role of singlet oxygen (1O2) to AO7 elimination was negligible. The results of cyclic experiments and catalyst characterization after reaction confirmed the favorable catalytic activity and structural stability of O-g-C3N4 particles. Furthermore, the O-g-C3N4/PMS system was very resistant to most of the environmental impacts, and AO7 removal was still acceptable in natural water environment. This study may provide an efficient metal-free carbonaceous activator with low dosage for PMS activation to remove recalcitrant organic pollutants (ROPs).

Coating CoFe2O4 shell on Fe particles to increase the utilization efficiencies of Fe and peroxymonosulfate for low-cost Fenton-like reactions

Bimetallic composites (Fe@CoFe2O4) with zero-valent Fe as the core encapsulated by CoFe2O4 layers are synthesized by a coprecipitation-calcination method, which are applied to activate PMS for the degradation of bisphenol A (BPA). Enhanced activity of Fe@CoFe2O4 is achieved with very fast degradation rate (kobs = 0.5737 min-1). In the fixed-bed reactor, the catalyst lifetime (tul) of Fe@CoFe2O4 is determined to be 22 h compared to 11 h of Fe, and the deactivation rate constant (kd) for Fe@CoFe2O4 is 0.0083 mg·L-1·h-1, only ∼1/10 of Fe (0.0731). The XPS results indicate that the core-shell structure of Fe@CoFe2O4 could promote the redox cycles of Co3+/Co2+ and Fe3+/Fe2+. It is proved that the coating of CoFe2O4 shell on Fe0 can protect the Fe0 core from being oxidized by PMS to form passivation layer. The electrons of Fe0 can therefore be used effectively for activating PMS to produce ROSs via the CoFe2O4 shell. This modification method of Fe0 would decrease the cost of PMS based wastewater remediation greatly, thus should have great potential on an industrial scale.

Bisphenol A effects on the host Biomphalaria alexandrina and its parasite Schistosoma mansoni

Bisphenol A (BPA) is one of the most potent endocrine-disrupting chemicals (EDCs) that adversely affect aquatic organisms. The present investigation explored the effects of exposure to BPA at 0.1 and 1 mgL-1 concentrations on the fecundity of Biomphalaria alexandrina, snail's infection with Schistosoma mansoni, and histology of the ovotestis and topographical structure of S. mansoni cercariae emerged from exposed snails. The 24 h LC50 and LC90 values of BPA against B. alexandrina were 8.31 and 10.88 mgL-1 BPA, respectively. The exposure of snails to 0.1 or 1 mgL-1 BPA did not affect the snail's survival. However, these concentrations caused an increase in the reproductive rate (Ro) of infected snails. A slight decrease in egg production was observed in snails exposed to 0.1 mgL-1 BPA after being infected (infected then exposed). However, a significant increase in egg production was noted in snails exposed to 1 mgL-1 BPA after infection with S. mansoni. Histopathological investigations indicated a clear alteration in the ovotestis tissue structure of exposed and infected-exposed groups compared to the control snails. Chronic exposure to BPA caused pathological alterations in the gametogenic cells. SEM preparations of S. mansoni cercariae emerged from infected-exposed snails showed obvious body malformations. From a public health perspective, BPA pollution may negatively impact schistosomiasis transmission, as indicated by the disturbance in cercarial production and morphology. However, it has adverse effects on the reproduction and architecture of reproductive organs of exposed snails, indicating that B. alexandrina snails are sensitive to sublethal BPA exposure.

Activation of peroxymonosulphate using a highly efficient and stable ZnFe2O4 catalyst for tetracycline degradation

Tetracycline (TC) is a widely used antibiotic that adversely affects ecosystems and, therefore, must be removed from the environment. Owing to their strong ability to oxidise pollutants, including antibiotics, and selectivity for these pollutants, an improved oxidation method based on sulphate radicals (SO4·-) has gained considerable interest. In this study, a novel technique for removing TC was developed by activating peroxymonosulphate (PMS) using a ZnFe2O4 catalyst. Using the co-precipitation method, a ZnFe2O4 catalyst was prepared by doping zinc into iron-based materials, which increased the redox cycle, while PMS was active and facilitated the production of free radicals. According to electron paramagnetic resonance spectroscopy results, a ZnFe2O4 catalyst may activate PMS and generate SO4·-, HO·, O2·-, and 1O2 to eliminate TC. This research offers a new method for creating highly effective heterogeneous catalysts that can activate PMS and destroy antibiotics. The study proposes the following degradation pathways: hydroxylation and ring-opening of TC based on the products identified using ultra-performance liquid chromatography-mass spectrometry. These results illustrated that the prepared ZnFe2O4 catalyst effectively removed TC and exhibited excellent catalytic performance.

Tetracycline hydrochloride degradation by activation of peroxymonosulfate with lanthanum copper Ruddlesden-Popper perovskite oxide: Performance and mechanism

ABO₃-type perovskite oxides have been regarded as a kind of potential catalyst for peroxymonosulfate (PMS) activation. But some limitations such as specific pH conditions and coexisting ion interference restrict its practical application. Herein, a lanthanum copper Ruddlesden-Popper perovskite oxide (La₂CuO₄) was successfully synthesized through the sol-gel process and applied in the activation of PMS. And for the first time the La₂CuO₄/PMS system was used for tetracycline hydrochloride (TC-HCl) degradation. Results showed that La₂CuO₄ was a potential PMS activation catalyst in the removal of antibiotics. At optimized condition (0.2 g/L catalysts, 1 mM PMS, pH₀ 6.9), 96.05% of TC-HCl was removed in 30 min. In experiments of debugging control conditions, over a wide pH range of 3-11, more than 90% of TC-HCl can be removed. In the natural water treatment process, TC-HCl removal rates of about 84.2% and 70.3% were obtained in tap water and River water, respectively. According to the reusability and stability tests and the results of FTIR and XPS analysis, La₂CuO₄ had high structural and chemical stability. Electron paramagnetic resonance (EPR) suggested that the active species including ·OH, SO₄^-· and ¹O₂ were detected in degradation reaction. Finally, reasonable reaction mechanisms and possible degradation pathways of TC-HCl were proposed. These results indicate that La₂CuO₄ can act as a potential catalyst for PMS activation to degrade TC-HCl in water.

Strategy for oxygen vacancy enriched CoMn spinel oxide catalyst activated peroxodisulfate for tetracycline degradation: process, mechanism, and toxicity analysis

Antibiotic-like organic pollutants are harmful to aquatic ecosystems and seriously disrupt the ecological balance. Herein, we propose a simple and versatile method to prepare cobalt-manganese oxides with high specific surface area and abundant oxygen vacancies using low-temperature reduction crystallization, which greatly facilitates the adsorption and electron transfer between the catalyst, PDS, and TC, thus accelerating the degradation of tetracycline (TC). Among them, the degradation efficiency of TC in the CoMn2O4(C)/PDS system was 99.8% in 60 min and the degradation rate remained above 90% after four cycles. The possible degradation mechanism is also discussed, where Co is the main metal active center of the catalyst and Mn plays an auxiliary catalytic role to promote the generation of reactive radicals in PDS through redox interactions between Co and Mn, where SO4 -˙ is the main active species for TC degradation. Finally, the possible degradation pathways of TC are proposed and the toxicity of the intermediates is evaluated. Findings from this work will shed light on the rational design of bimetallic oxide catalysts.

Modulating photothermal properties by integration of fined Fe-Co in confined carbon layer of SiO2 nanosphere for pollutant degradation and solar water evaporation

Environmental governance by photothermal materials especially for the separation of organic pollutants and regeneration of freshwater afford growing attention owing to their special solar-to-heat properties. Here, we construct a special functional nanosphere composed of an internal silica core coated by a thin carbon layer encapsulated plasmonic bimetallic FeCo₂O₄ spinel (SiO₂@CoFe/C) by a facile self-assembled approach and tuned calcination. Through combining the advantage of bimetallic Fe-Co and carbon layer, this obtained nanosphere affords improved multiple environmental governing functions including peroxymonosulfate (PMS) activation to degrade pollutants and photothermal interfacial solar water evaporation. Impressively, fined bimetal (FeCo) species (20 nm) acted as main catalytic substance were distributed on the N-doping carbon thin layer, which favors electron transfer and reactive accessibility of active metals. The increasing treatment temperature of catalysts caused the optimization of the surface active metal species and tuning catalytic properties in the AOPs. Besides, the incorporation of Co in the SiO₂@CoFe/C-700 could enable the improved PMS activation efficiency compared to SiO₂@Fe/C-700 and the mixed SiO₂@Co/C-700 and SiO₂@Fe/C-700, hinting a synergetic promotion effect. The bimetal coupled catalyst SiO₂@CoFe/C-700 affords enhanced photothermal properties compared to SiO₂@Co/C-700. Furthermore, photothermal catalytic PMS activation using optimal SiO₂@CoFe/C-700 was further explored in addressing stubborn pollutants including oxytetracycline, sulfamethoxazole, 2, 4-dichlorophenol, and phenol. The free radical quenching control suggests that both the sulfate radical, hydroxyl radical, superoxide radical, and singlet oxygen species are involved in the degradation, while the hydroxyl radical and singlet oxygen play a dominant role. Furthermore, the implementation of a solar-driven interfacial water evaporation model using SiO₂@CoFe/C-700 was further studied to obtain freshwater regeneration (1.26 kg m^-2 h^-1, 76.81% efficiency), indicating the comprehensive ability of the constructed nanocomposites for treating complicated environmental pollution including organics removal and freshwater regeneration.

Selective and efficient removal of emerging contaminants by sponge-like manganese ferrite synthesized using a solvent-free method: Crucial role of the three-dimensional porous structure

Ubiquitous macromolecular natural organic matter (NOM) in wastewater seriously influences the removal of emerging small-molecule contaminants via heterogeneous advanced oxidation processes because this material covers active sites and quenches reactive oxygen species. Here, sponge-like magnetic manganese ferrite (MnFe₂O₄-S) with a three-dimensional hierarchical porous structure was prepared via a facile solvent-free molten method. Compared with the particle-like structure of MnFe₂O₄-P, the sponge-like structure of MnFe₂O₄-S presents an enlarged specific surface area (112.14 m²·g^-1 vs. 58.73 m²·g^-1) and a smaller macropore diameter (68.2-77.2 nm vs. 946.5 nm). Enlarging the specific surface area increases the exposure of active sites, and adjusting the pore size helps sieve NOM and emerging contaminants. These changes are expected to effectively improve the degradation activity and overcome interference. To confirm the superiority of the sponge-like structure, MnFe₂O₄-S was used to activate peroxymonosulfate (PMS) for the degradation of multiple emerging contaminants, and its ability to degrade bisphenol A with and without humic acid (HA) was compared with that of MnFe₂O₄-P. The degradation activity of MnFe₂O₄-S was 1.6 times greater than that of MnFe₂O₄-P. Moreover, 20 mg·L^-1 HA inhibited the degradation activity of MnFe₂O₄-S by only 7.1%, which was much lower than that obtained for MnFe₂O₄-P (53.4%). In addition, the excellent performance was maintained in multiple water matrices. Notably, under lake water matrices, the degradation activity of MnFe₂O₄-P was inhibited by 35.6% while that of MnFe₂O₄-S was hardly inhibited. More importantly, the MnFe₂O₄-S/PMS system was also applicable to the treatment of actual wastewater and 73.0% and 90.1% of total organic carbon and chemical oxygen demand was removed from bio-treated coking wastewater containing non-biodegradable contaminants and NOM. This study provides an alternative route for the green production of high-activity porous spinel ferrites with environmental anti-interference properties.

Activation of Peroxymonosulfate Using Spent Li-Ion Batteries for the Efficient Degradation of Chloroquine Phosphate

Recycling and reusing spent lithium-ion batteries (LIBs) have gained a lot of attention in recent years, both ecologically and commercially. The carbon nanotube-loaded CoFe2O4 (CoFe2O4@CNTs) composite was made using a solvothermal technique utilizing wasted LIBs as the starting material and carbon nanotubes as support, and it was used as an efficient peroxymonosulfate (PMS, HSO5−) activator to degrade chloroquine phosphate (CQP). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), an energy dispersive spectrometer (EDS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and X-ray photoelectron spectroscopy (XPS) were utilized to characterize the physical and chemical properties of the catalyst generated. The impacts of CoFe2O4@CNTs dosage, PMS concentration, reaction temperature, initial pH value, starting CQP concentration, and co-existing ions have undergone extensive experimental testing. In comparison to bare CoFe2O4, the CoFe2O4@CNTs demonstrated increased catalytic activity, which might be attributed to their super electron transport capacity and large surface area. In ideal conditions, the mineralization efficiency and removal efficiency of 10 mg/L CQP approached 33 and 98.7%, respectively. By employing external magnets, the CoFe2O4@CNTs catalyst may be simply recycled and reused several times. The potential reaction mechanism in the CoFe2O4@CNTs/PMS system was also investigated. In summary, this study indicates that CoFe2O4@CNTs generated from spent lithium-ion batteries have a high potential in PMS activation for CQP and other pollutant degradation.

Enhanced Heterogeneous Catalytic Activity of Peroxymonosulfate for Rhodamine B Degradation via a CoII-Based Metal-Organic Framework

A stable metal-organic framework with the formula {[Co(BBZB)(IPA)]·H₂O}_n (JXUST-23, BBZB = 4,7-bis(1H-benzimidazole-1-yl)-2,1,3-benzothiadiazole and H₂IPA = isophthalic acid) was constructed by incorporating Co²⁺ ions and two conjugated ligands under solvothermal conditions. JXUST-23 takes a dinuclear cluster-based layer structure with a porosity of 2.7%. In this work, JXUST-23 was used to activate peroxymonosulfate (PMS) to degrade rhodamine B (RhB), a difficult-to-degrade pollutant in water. Compared with pure PMS or JXUST-23, the JXUST-23/PMS system displays the best degradation ability of RhB in neutral solution. When the mass ratio of JXUST-23 to PMS was 2:3, 99.72% of RhB (50 ppm) was removed within 60 min, and the reaction rate was 0.1 min^-1. Furthermore, free radical quenching experiments show that SO₄^•- was the main free radical during the process of RhB degradation. In addition, JXUST-23 exhibits good reusability for the degradation of the organic dye RhB, making it a potential candidate for environmental remediation.

Biochar loaded with cobalt ferrate activated persulfate to degrade naphthalene

Considering the simple preparation of biochar and the excellent activation performance of cobalt ferrate material, a biochar supported cobalt ferrate composite was synthesized by a solvothermal method. The material was used to activate persulfate (PS) to degrade naphthalene (NAP) in water. The structure and morphology characterization showed that the composite (CoFe₂O₄-BC) was successfully prepared. Under the conditions of 0.25 g L^-1 CoFe₂O₄-BC and 1 mM PS, 90.6% NAP (the initial concentration was 0.1 mM) was degraded after 30 minutes. The degradation kinetics of NAP followed the pseudo-first-order kinetic model with a rate constant of 0.0645 min^-1. With the increase of the dosage of activator and PS, the removal rate of NAP could be increased to 99.5%. The coexistence of anions and humic acids inhibited the removal of NAP. The acid environment promoted the removal of NAP while the alkaline environment inhibited it. After four cycles of CoFe₂O₄-BC material, the removal rate of NAP decreased from 90.6% to 79.4%. The removal of TOC was about 45% after each cycle. After the first cycle, the concentration of leached cobalt ion and leached iron ion was about 310 μg L^-1 and 30 μg L^-1 respectively. The free radical quenching experiments showed that SO₄ ^-˙ and OH˙ were the main causes of NAP removal, and the possible degradation path of NAP was elucidated by DFT calculation.

Anchoring ZnO on spinel cobalt ferrite for highly synergic sono-photo-catalytic, surfactant-assisted PAH degradation from soil washing solutions

In this study, the photocatalytic activity of ZnO was effectively improved via its combination with spinel cobalt ferrite (SCF) nanoparticles. The catalytic performance of ZnO@SCF (ZSCF) was investigated in coupling with UV irradiation and ultrasound (US), as a heterogeneous sono-photocatalytic process, for the decontamination of phenanthrene (PHE) from contaminated soil. Soil washing tests were conducted in a batch environment, after extraction assisted by using Tween 80. Several characterization techniques such as XRD, FESEM-EDS, BET, TEM, UV-vis DRS, PL and VSM were utilized to determine the features of the as-prepared catalysts. ZSCF showed an excellent catalytic activity toward degradation of PHE in the presence of US and UV with a significant synergic effect. It was found that more than 93% of PHE (35 mg/L) and 87.5% of TOC could be eliminated by the integrated ZSCF/US/UV system under optimum operational conditions (pH: 8.0, ZSCF: 1.5 g/L, UV power: 6.0 W and US power: 70 W) within 90 min of reaction. After five times of use, ZSCF illustrated good reusability in the decontamination of PHE (87%) and TOC (79%). Quenching tests revealed the contribution of h⁺, HO^• and e^- species during PHE degradation over ZSCF/UV/US and an S-scheme photocatalytic mechanisms was proposed for the possible charge transfer routes under the ZSCF system. This study provides the important role of SCF in enhancing the ZnO photocatalytic activity due to its high performance, easy recovery and excellent durability, which it make an efficient and promising catalyst in environmental clean-up applications.

Applications of Spent Lithium Battery Electrode Materials in Catalytic Decontamination: A Review

For a large amount of spent lithium battery electrode materials (SLBEMs), direct recycling by traditional hydrometallurgy or pyrometallurgy technologies suffers from high cost and low efficiency and even serious secondary pollution. Therefore, aiming to maximize the benefits of both environmental protection and e-waste resource recovery, the applications of SLBEM containing redox-active transition metals (e.g., Ni, Co, Mn, and Fe) for catalytic decontamination before disposal and recycling has attracted extensive attention. More importantly, the positive effects of innate structural advantages (defects, oxygen vacancies, and metal vacancies) in SLBEMs on catalytic decontamination have gradually been unveiled. This review summarizes the pretreatment and utilization methods to achieve excellent catalytic performance of SLBEMs, the key factors (pH, reaction temperature, coexisting anions, and catalyst dosage) affecting the catalytic activity of SLBEM, the potential application and the outstanding characteristics (detection, reinforcement approaches, and effects of innate structural advantages) of SLBEMs in pollution treatment, and possible reaction mechanisms. In addition, this review proposes the possible problems of SLBEMs in practical decontamination and the future outlook, which can help to provide a broader reference for researchers to better promote the implementation of “treating waste to waste” strategy.

Fabrication of a Co3O4 monolithic membrane catalyst as an efficient PMS activator for the removal of methylene blue

An oxalate-pyrolysis method was proposed for the fabrication of an integral Co3O4 catalyst towards PMS activation to degrade MB.

Co-doped Fe3O4/α-FeOOH for highly efficient peroxymonosulfate activation to degrade trimethoprim: Occurrence of hybrid non-radical and radical pathways

Trimethoprim (TMP), as a widely used chemotherapeutic antibiotic agent, has caused potential risks to the aquatic environment. In this study, magnetic Co-doped Fe₃O₄/α-FeOOH was fabricated by a facile one-step ageing method and used for activation of peroxymonosulfate (PMS) in TMP degradation. It was found that low catalyst (0.5 g/L) and PMS addition (0.2 mM) led to the high degradation efficiency of TMP (97.2%, k_obs = 0.11211 min^-1) over a wide range of pH. The oxidation of active radical (SO₄·^-) and non-radical singlet oxygen (¹O₂) co-acted on TMP degradation. Besides, PMS was activated through the cycles between Co(II)/Co(III) and Fe(II)/Fe(III). Fifteen degradation intermediates of TMP were identified by LC-MS, and three possible degradation pathways including hydroxylation, demethylation, and cleavage were proposed. The recovered catalysts exhibited high stability and reusability, maintaining 80% TMP removal efficiency with inappreciable metal leaching (0.012 mg/L of Co, 0.113 mg/L of Fe) after six cycles. Besides, the Co-Fe₃O₄/α-FeOOH/PMS system was highly tolerant to inorganic anions and actual water bodies (river water, lake water, tap water, and sewage plant effluent). Overall, this work provided a promising way to the potential application of Fe-based binary metal oxide for PMS activation.

Bicarbonate enhanced heterogeneous activation of peroxymonosulfate by copper ferrite nanoparticles for the efficient degradation of refractory organic contaminants in water

Nowadays, the treatment of residual refractory organic contaminants (ROCs) is a huge challenge for environmental remediation. In this study, a potential process is provided by copper ferrite catalyst (CuFe₂O₄) activated peroxymonosulfate (PMS, HSO₅^-) in the bicarbonate (HCO₃^-) enhanced system for efficient removal of Acid Orange 7 (AO7), 2,4-dichlorophenol, phenol and methyl orange (MO) in water. The impact of key reaction parameters, water quality components, main reactive oxygen species (ROS), probable degradation mechanism, rational degradation pathways and catalyst stability were systematically investigated. A 95.0% AO7 (C₀ = 100 mg L^-1) removal was achieved at initial pH (pH₀) of 5.9 ± 0.1 (natural pH), CuFe₂O₄ dosage of 0.15 g L^-1, PMS concentration of 0.98 mM, HCO₃^- concentration of 2 mM, and reaction time of 30 min. Both sulfate radical (SO₄^-•) and hydroxyl radical (^•OH) on the surface of catalyst were proved as the predominant radical species through radical quenching experiments and electron paramagnetic resonance (EPR) analysis. The buffer nature of HCO₃^- was partially contributed for the enhanced degradation of AO7 under CuFe₂O₄/PMS/HCO₃^- system. Importantly, according to ¹³C nuclear magnetic resonance (NMR) and EPR analysis, the positive effect of bicarbonate may be mainly attributed to the formation of peroxymonocarbonate (HCO₄^-), which may enhance the generation of ^•OH. The magnetic CuFe₂O₄ particles can be well recycled and the leaching concentration of Cu was acceptable (<1 mg L^-1). Considering the widespread presence of bicarbonate in water environment, this work may provide a safe, efficient, and sustainable technique for the elimination of ROCs from practical complex wastewater.

New combination of pulsed light and iron (II) for carbonate radical production to enhanced degradation of bisphenol A: Parameter optimization and degradation pathway

Bisphenol A(BPA) is a common industrial chemical with significant adverse impacts on Environment and human health. The present work evaluates the efficacy of pulsed light (PL) and Fe²⁺ ions in activation of sodium percarbonate (SPC) to produce hydroxyl (OH^•) and carbonate (CO₃^•-) radicals for efficient degradation of BPA. The effects of operational parameters such as solution pH, SPC and Fe²⁺ dose as well as the mixture composition were analyzed and the decomposition pathway of BPA proposed. The BPA was successfully degraded at the initial concentration of 15.0 mg/L and optimized conditions by the PL/Fe²⁺/SPC process (99.67 ± 0.29%). A rapid reduction in the degradation of BPA was observed with increasing pH due to OH^• radicals quenching and also the precipitation of Fe²⁺. Under the optimized conditions, degradation of BPA by PL/Fe²⁺/SPC process was five-times faster than the individual process. The quenching experiments revealed that radical and non-radical pathways on BPA degradation was accomplished with OH^•, CO₃^•-, O₂^•-, and ¹O_2, while OH^• and CO₃^•- radicals (as a dominant radicals) have the contributions of 80.23% and 8.30%, respectively. Based on the detected byproducts, ring cleavage can be considered as the main transformation mechanism of BPA by the PL/Fe²⁺/SPC process.

Spinel ferrites materials for sulfate radical-based advanced oxidation process: A review

In the past decade, the sulfate radical-based advanced oxidation processes (SR-AOPs) have been increasingly investigated because of their excellent performance and ubiquity in the degradation of emerging contaminants. Generally, sulfate radicals can be generated by activating peroxodisulfate (PDS) or peroxymonosulfate (PMS). To date, spinel ferrites (SF) materials have been greatly favored by researchers in activating PMS/PDS for their capability and unique superiorities. This article reviewed the recent advances in various pure SF, modified SF, and SF composites for PDS/PMS activation. In addition, synthesis methods, mechanisms, and potential applications of SF-based SR-AOPs were also examined and discussed in detail. Finally, we present future research directions and challenges for the application of SF materials in SR-AOPs.

A novel, Z-scheme ZnO@AC@FeO photocatalyst, suitable for the intensification of photo-mediated peroxymonosulfate activation: Performance, reactivity and bisphenol A degradation pathways

In this study, the intensification of a UVC-based PMS activation treatment is performed by a novel photocatalyst. Using ZnO nanoparticles coupled with activated carbon (AC), impregnated by ferroferric oxides (FO, magnetite), as an effective Z-scheme photocatalyst (ZACFO), the effective Bisphenol A (BP-A) removal was attained. Several techniques were applied for the characterization of the as-prepared catalyst and proved the successful preparation of ZACFO. The photocatalytic activity of pristine ZnO was significantly improved after its combination with ACFO. It was found that the fabrication of ZACFO heterostructures could inhibit the charge carriers recombination and also accelerate the charge separation of photo-induced e^-/h⁺ pairs. Under this UVC-based photocatalysis-mediated PMS activation system, ZACFO showed an excellent potential as compared to the single constituent catalysts. The complete degradation of 20 mg/L concentration of BP-A was attained in just 20 min with excellent reaction rate constant of 27.3 × 10^-2 min^-1. Besides, over 60% of TOC was eliminated by the integrated ZACFO/PMS/UV system within 60 min of reaction. The minor inhibition by most matrix components, the high recycling capability with minor metals' leaching and the effectiveness in complex matrices, constitute this composite method an efficient and promising process for treating real wastewater samples. Finally, based on the photo-produced reactive intermediates and by-products identified, the Z-scheme photocatalytic mechanism and the plausible pathway of BP-A degradation were proposed comprehensively. The presence and role of radical and non-radical pathways in the decontamination process of BP-A over ZACFO/PMS/UV system was confirmed.

Efficient degradation of Rhodamine B in water by CoFe2O4/H2O2 and CoFe2O4/PMS systems: A comparative study

In this work, a comparative study of efficient degradation of Rhodamine B (RhB) in CoFe₂O₄/H₂O₂ and CoFe₂O₄/PMS systems was performed. Batch experiments indicated that the RhB degradation rate of CoFe₂O₄/H₂O₂ system reached 95.5% at 90 min under the condition of 0.5 g L^-1 of CoFe₂O₄ dosage, 10 mM of H₂O₂ concentration and 3.0 of initial pH. At certain conditions of initial pH = 7.0, 0.3 g L^-1 of CoFe₂O₄ dosage, 7 mM of PMS concentration, CoFe₂O₄/PMS system could completely degrade RhB within 90 min. EPR and quenching experiments indicated that •OH was the main active species of CoFe₂O₄/H₂O₂ system, and •OH, SO₄•^-, •O₂^- and ¹O₂ participated in RhB degradation of CoFe₂O₄/PMS system. The circulate of Co(II)/Co(III) and Fe(II)/Fe(III) on the CoFe₂O₄ surface promoted the formation of free radical species in the two system. In CoFe₂O₄/PMS system, the formed •O₂^- and SO₅•^- realized the generation of non-free radical species (¹O₂). The LC-MS results indicated that N-de-ethylation, chromophore cleavage, opening rings and mineralization were the main steps for the RhB degradation of the two systems. After five cycles of degradation experiment, the CoFe₂O₄/H₂O₂ and CoFe₂O₄/PMS systems still maintained the high degradation rate (85.2% and 92.4%) and low mass loss (2.7% and 3.09%). In addition, CoFe₂O₄/PMS system had better potential value for the actual water and multi-pollutant degradation than CoFe₂O₄/H₂O₂ system. Finally, the toxicity analysis and cost assessment of the two oxidation systems were preliminarily evaluated.

Catalytic Degradation of Organic Contaminants by Microwave-Assisted Persulfate Activation System: Performance and Mechanism

In this study, a nickel ferrite (NiFe2O4) system was constructed to purify a phenol solution in water. During the process, the influences of several critical operating parameters including the NiFe2O4 amount, PS dosage, MW power, initial pH value, and different natural water anions were systematically studied. The results indicated that the constructed system performed excellently regarding the removal efficiency (97.74%) of phenol within 30 min. Meanwhile, the influence of co-existing anions such as Cl−, NO3−, H2PO4−, and HCO3− was also studied, which displayed an inhibiting action on phenol degradation, while HA facilitated it. To explore the reaction mechanism of this system, major free radical quenching experiments were conducted, and it was confirmed that both SO4•− and HO• were primary radicals. Moreover, stability experiments confirmed the apt stability of the NiFe2O4 system. Besides, the mineralization and toxicity analysis performed during phenol degradation also confirmed the superiority of the as-constructed system. Furthermore, the possible degradation mechanism of phenol was proposed. Hence, this system could be applied in advanced wastewater treatment.

Bioremediation of bisphenol A found in industrial wastewater using Trametes versicolor (TV) laccase nanoemulsion-based bead organogel in packed bed reactor

Bisphenol A (BPA) is one of the toxic chemicals, which is widely used for manufacturing epoxy, polyester resin, and polycarbonates. These materials are extensively used in manufacturing of reusable bottles, baby bottles, dental sealants, various medical devices, and so forth. Moreover, canned and packaged foods are sources of bisphenol A, which is unknowingly consumed by many people worldwide. Its endocrine disrupting and teratogenic properties impose potential risk to the wildlife and human health. BPA has been linked to reproductive, metabolic, and immunity disorders in humans. Regardless of BPA ban in reusable and baby bottles, annually, 15 billion pounds of BPA still being produced. BPA pollution and its cleanup are major challenges. Therefore, it is essential to develop a suitable strategy to bioremediate BPA. The Trametes versicolor (TV) laccase-based nanoemulsion calcium alginate bead organogel was able to transform 94% of BPA within 2 h of treatment. Organogel showed 60% of BPA removal from actual industrial wastewater in packed bed batch reactor and 67% of BPA removal in continuous flow packed bed reactor. The biological oxygen demand (BOD) of treated industrial effluent was 14 mg/L, which is very much less than untreated effluent's BOD, which was 48 mg/L. The chemical oxygen demand of industrial effluent was 1240 mg/ml, and treated effluent was 248 mg/L, respectively. Hence, application of nanoemulsion-based organogel in packed bed reactor found to be a potential candidate for the bioremediation of industrial effluent containing BPA. PRACTITIONER POINTS: The TV laccase-based nanoemulsion calcium alginate bead organogel was able to transform 94% of BPA. Organogel showed 67% of BPA removal from industrial wastewater in continuous flow packed bed reactor. The nanoemulsion-based organogel in packed bed reactor found to be potential candidate for the bioremediation of industrial effluent containing BPA.

Enhanced Fenton-like catalysis for pollutants removal via MOF-derived CoxFe3-xO4 membrane: Oxygen vacancy-mediated mechanism

Traditional batch configuration is not sustainable due to catalyst leaching and ineffective recovery. Herein, a novel membrane-based catalyst with oxygen vacancies is developed, which assembled metal-organic-framework cobalt ferrite nanocrystals (MOF-d Co_xFe_3-xO₄) on polyvinylidene fluoride membrane to activate peroxymonosulfate (PMS) for catalytic degradation of emerging pollutants. MOF-d Co_xFe_3-xO₄ are synthesized by one-step pyrolysis using Co/Fe bimetallic organic frameworks (Co_xFe_3-x bi-MOF) with tunable cobalt content as a template (x/3-x represented the molar ratio of Co and Fe in MOF). Intriguingly, MOF-d Co_1.75Fe_1.25O₄ membrane exhibits excellent PMS activation efficiency as indicated by 95.12% removal of the probe chemical (bisphenol A) at 0.5 mM PMS (∼100 L m^-2 h^-1 at the loading of 10 mg), which is significantly higher than the traditional Co_1.75Fe_1.25O₄ suspension system (34.16%). Experimental results show that the membrane has excellent anti-interference ability to anions and dissolved organic matter, and can effectively degrade a variety of emerging pollutants, and its performance is not inhibited by the change of solution pH (3-9) or the long-term (20 h) continuous flow operation. EPR and quenching experiments show that catalytic degradation is the result of the synergistic effect of radicals and non-radicals. The oxygen vacancy-mediated mechanism can explain the formation of active substances, and the formation of ¹O₂ plays an important role in the degradation of bisphenol A. This study provides a membrane-based strategy for effective and sustainable removal of emerging pollutants.

Facile synthesis of CoFe2O4@BC activated peroxymonosulfate for p-nitrochlorobenzene degradation: Matrix effect and toxicity evaluation

p-Nitrochlorobenzene (p-NCB) is widely used in industry and poses a potential threat to the public health due to its persistence, carcinogenicity and mutagenicity. Herein, magnetic catalyst CoFe₂O₄@Biochar (CoFe₂O₄@BC) was synthesized by a facile sol-gel method, efficiently activating peroxymonosulfate (PMS) to degrade p-NCB. The synergistic effect of Fe and Co in well-dispersed CoFe₂O₄ and the electron transfer promote the production of reactive oxygen species (ROS) (OH, SO₄^- and O₂^-), efficiently removing p-NCB enriched by CoFe₂O₄@BC. Under optimum conditions, the CoFe₂O₄@BC/PMS system could remove 89% of p-NCB from water, and the degradation efficiency could reach 80% in soil. Toxic chlorinated intermediates appeared during the degradation process and thus efficient dechlorination process can lower the toxicity of the reaction solution, which was also proved by the oxygen uptake inhibition experiment as well as zebrafish toxicity experiments. Furthermore, p-NCB degradation efficiency could be inhibited by Cl^-, HCO₃^-, HPO₄^2- and humic acid (HA) through quenching effect or occupation of CoFe₂O₄@BC surface active sites while HPO₄^2- could also improve the efficiency by directly activating PMS. The CoFe₂O₄@BC/PMS system can be efficiently applied in the remediation of p-NCB pollution in water and soil.

Sustainably recycling spent lithium-ion batteries to prepare magnetically separable cobalt ferrite for catalytic degradation of bisphenol A via peroxymonosulfate activation

A selective separation-recovery process based on tuning organic acid was proposed to the resource recycling of spent lithium-ion batteries (LIBs) for the first time. The low-cost preparation of CoFe₂O₄, reuse of waste acid and recovery of Li can be realized in this process, simultaneously. Li and Co in spent LIBs can be leached efficiently using citric acid as a leaching agent, and separated effectively from leaching solution by tuning oxalic acid content. The results from the characterizations of the prepared CoFe₂O₄ (CoFe₂O₄-LIBs) show that it possesses higher ratio of Co(II)/Co(III) and Fe(II)/Fe(III), larger surface specific area and more number of acid sites in comparison with pure CoFe₂O₄. Besides, CoFe₂O₄-LIBs was used to activate peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA). Interestingly, its degradation performance is superior to that of pure CoFe₂O₄ and the related Co-based catalysts. The excellent degradation performance can be maintained in presence of inorganic ions (e.g., Cl^-, HCO₃^-, H₂PO₄^- and NO₃^-) with high concentration or humic acid. Moreover, surface-bound SO₄^∙- is considered as the main reactive species for the degradation of BPA. More importantly, CoFe₂O₄-LIBs can be readily recycled by using an external magnet and own superior ability of regeneration.

Enhancement strategies for efficient activation of persulfate by heterogeneous cobalt-containing catalysts: A review

As a clean and efficient technology for the degradation of organic contaminants, sulfate radical based advanced oxidation processes (SR-AOPs) have attracted more and more attention in the past decades. Cobalt is regarded as the most reactive and efficient non-noble metal catalyst for the activation of persulfate including peroxymonosulfate (PMS) and peroxydisulfate (PDS) to produce sulfate radicals. Due to the limitations of homogeneous catalytic systems, the heterogeneous cobalt-containing catalysts have been emerged and rapidly developed. Various strategies have been schemed to further enhance the activation ability of persulfate by heterogeneous cobalt-containing catalysts. This paper provides an overview on the recent progress in enhancement strategies for the highly efficient activation of persulfate by heterogeneous cobalt-containing catalysts. With a brief introduction on the chemistry and feature of sulfate radical reactions catalyzed by homogeneous Co²⁺/Co³⁺ species, the main strategies for enhancing persulfate activation by heterogeneous cobalt-containing catalysts are summarized, such as surface and morphology design, multiple reactive centers design, organic-inorganic hybrids and heterostructure composites. Future perspectives of heterogeneous SR-AOPs systems catalyzed by cobalt-containing catalysts are outlined.

ZnO-CdO nanocomposites incorporated with graphene oxide nanosheets for efficient photocatalytic degradation of bisphenol A, thymol blue and ciprofloxacin

The widespread existence of different organic contaminants mostly phenolic compounds, organic dyes and antibiotics in water bodies initiated by the various industrial wastes that raised great scientific concern and public awareness as well recently owing to their prospective capability to spread these contaminants resistant gene and pose hazard to human. In the present study, a series of nanostructured ZnO-CdO incorporated with reduced graphene oxide (ZCG nanocomposites) were successfully synthesized by a simple refluxing method and characterized by using the X-ray diffraction (XRD), Raman spectroscopy, FT-IR spectroscopy, photoluminescence spectroscopy, field emission-scanning microscope (FE-SEM) and UV-visible diffused reflectance spectroscopy (DRS) for the photocatalytic degradation of bisphenol A (BPA), thymol blue (ThB) and ciprofloxacin (CFn) with illumination of UV light. The maximum degradation and mineralization of BPA, ThB and CFn was achieved around 98.5%, 98.38% and 99.28% over the ZCG-5 nanocomposite photocatalyst after UV light irradiation for 180 min, 120 min and 75 min, respectively. The superior photocatalytic activity of ZCG-5 ascribed to enhance adsorption capacity, effective separation of charge carriers consequential for the production of more ROS after incorporation of RGO nanosheets with ZnO-CdO in photocatalyst. The conceivable photocatalytic degradation mechanism of BPA, ThB and CFn was elucidated through ROS identification and the assessment of photocatalyst stability by reusability, EEO (kwh/m³order) and UV light dose (mJ/cm²) were evaluated. The plausible photocatalytic degradation pathways were proposed for the degradation of BPA, ThB and CFn via GC-MS analysis. The present work investigates the efficient removal of BPA, ThB and CFn using ZCG nanocomposites as photocatalyst.

Heterogeneous activation of peroxymonosulfate by Co-doped Fe2O3 nanospheres for degradation of p-hydroxybenzoic acid

Environmental remediation has become more effective when using nanotechnologies. In this study, iron oxide (α-Fe₂O₃) nanospheres with different cobalt doping levels (xCo-Fe₂O₃) were synthesised and applied in the heterogeneous activation of peroxymonosulfate (PMS) for the degradation of p-hydroxybenzoic acid (p-HBA). The catalyst (3Co-Fe₂O₃) with 3% Co doping exhibits the best performance for PMS activation, possibly because of the larger specific surface area and the tailored catalyst surface as confirmed by X-ray photoelectron spectroscopy (XPS). Reaction parameters were investigated to optimise the degradation efficiency. The metal ions leaching tests confirmed the higher stability of the catalyst, thanks to the leaching suppression by the doping of Co²⁺. The main contribution of free radicals (SO₄^•- and ^•OH) was confirmed by electron paramagnetic resonance (EPR) spectra, whereas partial contribution of oxygen anions and singlet oxygen (O₂^•-, ¹O₂) was observed during the quenching tests. Finally, a radical based degradation mechanism was proposed for the removal of p-HBA. It is expected to open up a novel perspective for the application of iron oxide as a potential catalyst for the removal of emerging contaminants.

A Comprehensive Assessment of Catalytic Performances of Mn2O3 Nanoparticles for Peroxymonosulfate Activation during Bisphenol A Degradation

Catalytic performances of Mn2O3 nanoparticles for peroxymonosulfate (PMS) activation in bisphenol A (BPA) degradation were comprehensively investigated in this study. Experimental results showed that 10 mg/L BPA could be 100% degraded within 20 min with the dosages of 0.2 g/L Mn2O3 and 0.1 mM PMS. Moreover, Mn2O3 showed remarkable activity in activation of PMS and excellent adaptability in various real water matrices, including river water, tap water and secondary effluents. Based on the radical detection and scavenging experiments, it was found that both radical and non-radical oxidation contributed to the degradation of BPA and 1O2 was the dominant species in the degradation compared to •OH, SO4•− and O2•−. A total of 15 transformation products were identified by LC/MS-MS during BPA degradation in the Mn2O3/PMS system, and degradation pathways via three routes are proposed. Compared with lab-made catalysts reported in the literature, the Mn2O3 catalyst demonstrated its superiority in terms of its high TOC removal, low PMS consumption and fast degradation rate for BPA.

Efficient degradation of clofibric acid by heterogeneous catalytic ozonation using CoFe2O4 catalyst in water

CoFe₂O₄ (Cobalt ferrite, CF) nanoparticles were prepared, well characterized and applied as efficient solid catalyst in catalytic ozonation, named CF/O₃ process, for the removal of emerging organic contaminants (EOCs). The degradation and mineralization of clofibric acid (CA) in CF/O₃ process were dramatically enhanced in comparison with those under the O₃ system. Surface hydroxyl groups (HGs) were considered as an important factor for ozone decomposition and the reactive oxygen species (ROS) on the catalyst surface were mainly responsible for CA elimination. The contribution and formation of ROS, including hydroxyl radicals (^•OH), especially superoxide radicals (O₂^•-), singlet oxygen (¹O₂), and hydrogen peroxide (H₂O₂) were evaluated, and a rational mechanism was elucidated accordingly. Probable degradation pathway of CA was proposed according to the organic intermediates identified. The acute toxicity of the treated solution increased during the first 15 min and then declined rapidly and nearly disappeared as the reaction proceeded. In addition, acceptable catalytic performance of CF/O₃ can be obtained for the treatment of other EOCs and the treatment of natural surface water spiked with CA. This work presents an efficient and promising catalytic ozonation technique for the elimination of EOCs in complex water matrices.

Efficient activation of peroxymonosulfate and degradation of Orange G in iron phosphide prepared by pickling waste liquor

In this study, the low-cost preparation of iron phosphide by using pickling waste liquor as the initial material was performed through a two-step reaction. The degradation of Orange G was evaluated using iron phosphide coupled with peroxymonosulfate to construct a catalytic system. The removal efficiencies of Orange G and total organic carbon reached 97.4 and 58.4% at 60 min, respectively. Iron phosphide has dual-catalysis centers for the activation of PMS. Multiple free radicals (e.g., SO₄^•-, HO^•, SO₅^•-, and O₂^•-) and singlet oxygen were involved in the pollutant degradation, of which sulfate radicals played the main role. The iron phosphide catalyst exhibited excellent recycling stability, and its catalytic efficiency reached 95% after five cycles. In summary, the Fe₂P/PMS system-as a Fenton-like catalytic system-has certain advantages, including low cost, high efficiency, sufficient reusability, and good stability, all of which are favorable for its practical application.