Degradation of polyethylene plastic in soil and effects on microbial community composition

Micro- and nanoplastics in agricultural soils: Assessing impacts and navigating mitigation

Micro-/nanoplastic contamination in agricultural soils raises concerns on agroecosystems and poses potential health risks. Some of agricultural soils have received significant amounts of micro-/nanoplastics (MNPs) through plastic mulch film and biosolid applications. However, a comprehensive understanding of the MNP impacts on soils and plants remains elusive. The interaction between soil particles and MNPs is an extremely complex issue due to the different properties and heterogeneity of soils and the diverse characteristics of MNPs. Moreover, MNPs are a class of relatively new anthropogenic pollutants that may negatively affect plants and food. Herein, we presented a comprehensive review of the impacts of MNPs on the properties of soil and the growth of plants. We also discussed different strategies for mitigating or eliminating MNP contamination. Moreover, perspectives for future research on MNP contamination in the agricultural soils are also highlighted.

Microbial-mediated conversion of soil organic carbon co-regulates the evolution of antibiotic resistance

The influence of organic carbon on the proliferation of antibiotic resistance genes (ARGs) in the soil has been widely documented. However, it is unclear how soil organic carbon (SOC) interacts with the evolution of antibiotic resistance in bacteria. Here, we examined the variations in ARGs abundance during SOC mineralization and explored the microbiological mechanisms and key metabolic pathways involved in their coevolution. The results showed that the SOC mineralization rate was closely correlated with ARGs abundance (p < 0.05). High organic carbon (OC) mineralization was conducive to the occurrence of multidrug resistance genes. For example, multidrug_transporter and mexB increased 2.26 and 7.83 times from the initial level. The competitor (stress) evolutionary strategy model revealed that higher OC inputs drive environmental microorganisms to evolve from stress tolerant to high resistance and strong adaptation. Meta-genomic and transcriptomic analyses revealed that the conversion process of pyruvate to acetyl-CoA to acetate was the critical metabolic pathway for the co-regulation of antibiotic resistance. Gene deletion validation trials have demonstrated that the key functional genes (ackA and pta) involved in this process can modulate the development of vancomycin and multidrug resistance. This outcome provides a preliminary framework for microbial mechanisms that target the co-regulation of microbial OC conversion and the evolution of antibiotic resistance.

The Plasticene era: Current uncertainties in estimates of the hazards posed by tiny plastic particles on soils and terrestrial invertebrates

Plastics are ubiquitous in our daily life. Large quantities of plastics leak in the environment where they weather and fragment into micro- and nanoparticles. This potentially releases additives, but rarely leads to a complete mineralization, thus constitutes an environmental hazard. Plastic pollution in agricultural soils currently represents a major challenge: quantitative data of nanoplastics in soils as well as their effects on biodiversity and ecosystem functions need more attention. Plastic accumulation interferes with soil functions, including water dynamics, aeration, microbial activities, and nutrient cycling processes, thus impairing agricultural crop yield. Plastic debris directly affects living organisms but also acts as contaminant vectors in the soils, increasing the effects and the threats on biodiversity. Finally, the effects of plastics on terrestrial invertebrates, representing major taxa in abundance and diversity in the soil compartment, need urgently more investigation from the infra-individual to the ecosystem scales.

Stable isotopes and nanoSIMS single-cell imaging reveals soil plastisphere colonizers able to assimilate sulfamethoxazole

The presence and accumulation of both, plastics and antibiotics in soils may lead to the colonization, selection, and propagation of soil bacteria with certain metabolic traits, e.g., antibiotic resistance, in the plastisphere. However, the impact of plastic-antibiotic tandem on the soil ecosystem functioning, particularly on microbial function and metabolism remains currently unexplored. Herein, we investigated the competence of soil bacteria to colonize plastics and degrade 13C-labeled sulfamethoxazole (SMX). Using single-cell imaging, isotope tracers, soil respiration and SMX mineralization bulk measurements we show that microbial colonization of polyethylene (PE) and polystyrene (PS) surfaces takes place within the first 30 days of incubation. Morphologically diverse microorganisms were colonizing both plastic types, with a slight preference for PE substrate. CARD-FISH bacterial cell counts on PE and PS surfaces formed under SMX amendment ranged from 5.36 × 103 to 2.06 × 104, and 2.06 × 103 to 3.43 × 103 hybridized cells mm-2, respectively. Nano-scale Secondary Ion Mass Spectrometry measurements show that 13C enrichment was highest at 130 days with values up to 1.29 atom%, similar to those of the 13CO2 pool (up to 1.26 atom%, or 22.55 ‰). Independent Mann-Whitney U test showed a significant difference between the control plastisphere samples incubated without SMX and those in 13C-SMX incubations (P < 0.001). Our results provide direct evidence demonstrating, at single-cell level, the capacity of bacterial colonizers of plastics to assimilate 13C-SMX from contaminated soils. These findings expand our knowledge on the role of soil-seeded plastisphere microbiota in the ecological functioning of soils impacted by anthropogenic stressors.

Enhanced biodegradation of microplastic and phthalic acid ester plasticizer: The role of gut microorganisms in black soldier fly larvae

Hermetia illucens larvae are recognized for their ability to mitigate or eliminate contaminants by biodegradation. However, the biodegradation characteristics of microplastics and phthalic acid esters plasticizers, as well as the role of larval gut microorganisms, have remained largely unrevealed. Here, the degradation kinetics of plasticizers, and biodegradation characteristics of microplastics were examined. The role of larval gut microorganisms was investigated. For larval development, microplastics slowed larval growth significantly (P < 0.01), but the effect of plasticizer was not significant. The degradation kinetics of plasticizers were enhanced, resulting in an 8.11 to 20.41-fold decrease in degradation half-life and a 3.34 to 3.82-fold increase in final degradation efficiencies, compared to degradation without larval participation. The depolymerization and biodeterioration of microplastics were conspicuously evident, primarily through a weight loss of 17.63 %-25.52 %, variation of chemical composition and structure, bio-oxidation and bioerosion of microplastic surface. The synergistic effect driven by larval gut microorganisms, each with various functions, facilitated the biodegradation. Specifically, Ignatzschineria, Paenalcaligenes, Moheibacter, Morganella, Dysgonomonas, Stenotrophomonas, Bacteroides, Sphingobacterium, etc., appeared to be the key contributors, owing to their xenobiotic biodegradation and metabolism functions. These findings offered a new perspective on the potential for microplastics and plasticizers biodegradation, assisted by larval gut microbiota.

Short-term impacts of polyethylene and polyacrylonitrile microplastics on soil physicochemical properties and microbial activity of a marine terrace environment in maritime Antarctica

Evidence of microplastic (MP) pollution in Antarctic terrestrial environments reinforces concerns about its potential impacts on soil, which plays a major role in ecological processes at ice-free areas. We investigated the effects of two common MP types on soil physicochemical properties and microbial responses of a marine terrace from Fildes Peninsula (King George Island, Antarctica). Soils were treated with polyethylene (PE) fragments and polyacrylonitrile (PAN) fibers at environmentally relevant doses (from 0.001% to 1% w w-1), in addition to a control treatment (0% w w-1), for 22 days in a pot incubation experiment under natural field conditions. The short-term impacts of MPs on soil physical, chemical and microbial attributes seem interrelated and were affected by both MP dose and type. The highest PAN fiber dose (0.1%) increased macro and total porosity, but decreased soil bulk density compared to control, whereas PE fragments treatments did not affect soil porosity. Soil respiration increased with increasing doses of PAN fibers reflecting impacts on physical properties. Both types of MPs increased microbial activity (fluorescein diacetate hydrolysis), decreased the cation exchange capacity but, especially PE fragments, increased Na+ saturation. The highest dose of PAN fibers and PE fragments increased total nitrogen and total organic carbon, respectively, and both decreased the soil pH. We discussed potential causes for our findings in this initial assessment and addressed the need for further research considering the complexity of environmental factors to better understand the cumulative impacts of MP pollution in Antarctic soil environments.

Biodegradation of microplastics derived from controlled release fertilizer coating: Selective microbial colonization and metabolism in plastisphere

Coated controlled-release fertilizers (CRFs) are widely used in agriculture, and the persistent presence of residual polymer coating has raised environmental concerns. This study investigates the underlying degradation dynamics of microplastics (MPs) derived from three typical materials used in CRFs, including polyethylene (PE), epoxy (EP), and polyurethane (PU), through a soil degradation test. The formation of surface biofilm, the succession process, and metabolic characteristics of microbial community are revealed by laser scanning confocal microscope, 16S rRNA sequencing, and non-targeted metabolomics analysis. The weight loss rates of PE, EP, and PU after 807 days of degradation were 16.70 %, 2.79 %, and 4.86 %, respectively. Significant secondary MPs were produced with tears and holes appeared in the coating cross sections and pyrolysis products were produced such as ethers, acids, and esters for PE; alkanes, olefins and their branched-chain derivatives for EP; and short-chain fatty acids and benzene molecules for PU. The coating surface selectively recruited the bacteria of Chujaibacter and Ralstonia and fungus of Fusarium and Penicillium, forming biofilm composed of lipids, proteins, and living cells. The metabolism of amino acids and polymers was enhanced to protect against MP-induced stress. The metabolites or intermediates of organic acids and derivatives, oxygen-contained organic compounds, and benzenoids on CRF surface increased significantly compared with soil, but there were no significant differences among different coating types. This study provides insights to the underlying mechanisms of biodegradation and microenvironmental changes of MPs in soil.

Biodeterioration of polyethylene by Bacillus cereus and Rhodococcus equi isolated from soil

Polyethylene (PE), a non-biodegradable plastic, is widely used in agriculture as a mulch material, which causes serious plastic pollution when it is discarded. Recent studies have described the biodeterioration of PE by bacteria, but it is difficult for a single bacterial species to effectively degrade PE plastic. We isolated two strains with PE-degrading ability, Bacillus cereus (E1) and Rhodococcus equi (E3), from the soil attached to plastic waste on the south side of Mount Tai, China, using a medium with PE plastic as the only carbon source. By clear zone area analysis, we found that E1 mixed with E3 could improve the degradation of PE plastics. The mixture of E1 and E3 was incubated for 110 days in a medium containing PE and mulch film as the only carbon source, respectively. After 110 days, a decrease in pH and mass was observed. Obvious slits and depressions were observed on the surface of the PE film and the mulch films using scanning electron microscopy. The surface hydrophobicity of both films decreased, and FTIR revealed the formation of new oxidation groups on their surfaces during the degradation process and the destruction of the original CH2 long chains of PE. Besides, we found that surface of the mulch films contained more viable bacteria than the liquid medium. In conclusion, we identified two PE-degrading strains whose mixture can effectively degrade mulch film than pure PE film. Our results provide a reference for understanding PE plastic degradation pathways and their associated degradation processes.

Identification and visualization of environmental microplastics by Raman imaging based on hyperspectral unmixing coupled machine learning

Microplastics (MPs) are ubiquitous contaminants that have become an emerging pollutant of concern, potentially threatening human health and ecosystem environments. Although current detection methods can accurately identify various types of MPs, it remains necessary to develop non-destructive and rapid methods to meet growing demands for detection. Herein, we combine a hyperspectral unmixing method and machine learning to analyse Raman imaging data of environmental MPs. Five MPs types including poly(butylene adipate-co-terephthalate) (PBAT), poly(butylene succinate) (PBS), p-polyethylene (PE), polystyrene (PS) and polypropylene (PP) were visualized and identified. Individual or mixed pure or aged MPs along with environmental samples were analysed by Raman imaging. Alternating volume maximization (AVmax) combined with unconstrained least squares (UCLS) method estimated end members and abundance maps of each of the MPs in the samples. Pearson correlation coefficients (r) were used as the evaluation index; the results showed that there is a high similarity between the raw spectra and the average spectra calculated by AVmax. This indicates that Raman imaging based on machine learning and hyperspectral unmixing is a novel imaging analysis method that can directly identify and visualize MPs in the environment.

Microplastic pollution: a review of techniques to identify microplastics and their threats to the aquatic ecosystem

Microplastics (MPs), small synthetic particles, have emerged as perilous chemical pollutants in aquatic habitats, causing grave concerns about their disruptive effects on ecosystems. The fauna and flora inhabiting these specific environments consume these MPs, unwittingly introducing them into the intricate web of the food chain. In this comprehensive evaluation, the current methods of identifying MPs are amalgamated and their profound impacts on marine and freshwater ecosystems are discussed. There are many potential risks associated with MPs, including the dangers of ingestion and entanglement, as well as internal injuries and digestive obstructions, both marine and freshwater organisms. In this review, the merits and limitations of diverse identification techniques are discussed, including spanning chemical analysis, thermal identification, and spectroscopic imaging such as Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and fluorescent microscopy. Additionally, it discusses the prevalence of MPs, the factors that affect their release into aquatic ecosystems, as well as their plausible impact on various aquatic ecosystems. Considering these disconcerting findings, it is imperative that appropriate measures should be taken to assess the potential risks of MP pollution, protect aquatic life and human health, and foster sustainable development.

Mechanism of polyethylene and biodegradable microplastic aging effects on soil organic carbon fractions in different land-use types

Microplastics (MPs) are widely present in terrestrial ecosystems, but knowledge about the aging characteristics of MPs in different land-use types and their impact on soil organic carbon fractions is still limited. Polyethylene (PE) and biodegradable MPs (Poly propylene carbonate and Polybutylene adipate terephthalate synthetic material (PPC + PBAT, Bio)), at 0 %, 0.03 %, and 0.3 % (w/w) dosages, were added to grassland, farmland, and facility soils for eight-week incubation. The aging degree of MPs was explored by quantifying the carbonyl index (CI). Soil organic C fractions such as SOC, particulate organic carbon (POC), mineral-associated organic carbon (MAOC), and microbial-derived C were analyzed. MPs underwent rapid aging after incubation, and the CI value for 0.03 % PE-MPs increased from 0.05 to 0.27 (farmland) and 0.26 (facility) (p < 0.05). The aging degree of 0.03 % and 0.3 % Bio-MPs was most significant in grassland, with CI decreasing by 46.6 % and 69.0 %, respectively. The CI of MPs were negatively correlated with their dosage. The 0.03 % and 0.3 % PE-MPs decreased soil organic carbon (SOC) content by 7.4 % and 8.2 % in grassland, and 3.0 % and 6.0 % in the facility (p < 0.05). POC content of farmland and facility soil was negatively correlated with PE-MPs' CI (p < 0.05). The 0.03 % PE and Bio-MPs decreased fungal necromass C (FNC) by 0.40 and 0.05 g kg-1 in grassland and 0.48 and 0.21 g kg-1 in farmland. Besides, the dosage of MPs regulated FNC content through soil pH, nutrients, and extracellular enzyme activity, either directly or indirectly, ultimately affecting the soil C pool. Therefore, this study demonstrates that MPs strongly affect SOC dynamics by influencing soil microbial enzyme activity and fungal necromass.

Key Role of Vegetation Cover in Alleviating Microplastic-Enhanced Carbon Emissions

Microplastics (MPs) are considered to influence fundamental biogeochemical processes, but the effects of plant residue-MP interactions on soil carbon turnover in urban greenspaces are virtually unknown. Here, an 84-day incubation experiment was constructed using four types of single-vegetation-covered soils (6 years), showing that polystyrene MP (PSMP) pollution caused an unexpectedly large increase in soil CO2 emissions. The additional CO2 originating from highly bioavailable active dissolved organic matter molecules (<380 °C, predominantly polysaccharides) was converted from persistent carbon (380-650 °C, predominantly aromatic compounds) rather than PSMP derivatives. However, the priming effect of PSMP derivatives was weakened in plant-driven soils (resistivity: shrub > tree > grass). This can be explained from two perspectives: (1) Plant residue-driven humification processes reduced the percentage of bioavailable active dissolved organic matter derived from the priming effects of PSMPs. (2) Plant residues accelerated bacterial community succession (dominated by plant residue types) but slowed fungal community demise (retained carbon turnover-related functional taxa), enabling specific enrichment of glycolysis, the citric acid cycle and the pentose phosphate pathway. These results provide a necessary theoretical basis to understand the role of plant residues in reducing PSMP harm at the ecological level and refresh knowledge about the importance of biodiversity for ecosystem stability.

Significance of landfill microbial communities in biodegradation of polyethylene and nylon 6,6 microplastics

Plastic pollution, particularly microplastics, poses a significant environmental challenge. This study aimed to address the urgent need for sustainable solutions to manage plastic waste. The degradation of polyethylene microplastics (PEMPs) and nylon 6,6 microplastics (NMPs) were investigated using bacterial culture isolates, isolated from a municipal landfill site and identified through 16 S rDNA as well as metagenomics techniques.The study demonstrated for the first time along with degradation mechanism. The isolates identified as Achromobacter xylosoxidans and mixed culture species in dominance of Pulmonis sp. were used to degrade PEMPs and NMPs. Achromobacter xylosoxidans reduced microplastic's dry weight by 26.7% (PEMPs) and 21.3% (NMPs) in 40 days, while the mixed culture achieved weight reductions of 19.3% (PEMPs) and 20% (NMPs). The release of enzymes, laccase and peroxidases revealed C-C bond cleavage and reduced polymer chain length. The thermal studies (TGA and DSC) revealed changes in the thermal stability and transition characteristics of microplastics. The structural alterations on PEMPs and NMPs were recorded by FTIR analysis. Byproducts such as alkanes, esters, aromatic compounds and carboxylic acids released were identified by GC-MS. These results suggest the effectiveness of bacterial isolates in degrading PEMPs and NMPs, with potential for sustainable plastic waste management solutions.

Microbial metabolism influences microplastic perturbation of dissolved organic matter in agricultural soils

An estimated 258 million tons of plastic enter the soil annually. Joining persistent types of microplastic (MP), there will be an increasing demand for biodegradable plastics. There are still many unknowns about plastic pollution by either type, and one large gap is the fate and composition of dissolved organic matter (DOM) released from MPs as well as how they interact with soil microbiomes in agricultural systems. In this study, polyethylene MPs, photoaged to different degrees, and virgin polylactic acid MPs were added to agricultural soil at different levels and incubated for 100 days to address this knowledge gap. We find that, upon MP addition, labile components of low aromaticity were degraded and transformed, resulting in increased aromaticity and oxidation degree, reduced molecular diversity, and changed nitrogen and sulfur contents of soil DOM. Terephthalate, acetate, oxalate, and L-lactate in DOM released by polylactic acid MPs and 4-nitrophenol, propanoate, and nitrate in DOM released by polyethylene MPs were the major molecules available to the soil microbiomes. The bacteria involved in the metabolism of DOM released by MPs are mainly concentrated in Proteobacteria, Actinobacteriota, and Bacteroidota, and fungi are mainly in Ascomycota and Basidiomycota. Our study provides an in-depth understanding of the microbial transformation of DOM released by MPs and its effects of DOM evolution in agricultural soils.

Diazotrophic abundance and community structure associated with three meadow plants on the Qinghai-Tibet Plateau

Symbiotic diazotrophs form associations with legumes and substantially fix nitrogen into soils. However, grasslands on the Qinghai-Tibet Plateau are dominated by non-legume plants, such as Kobresia tibetica. Herein, we investigated the diazotrophic abundance, composition, and community structure in the soils and roots of three plants, non-legume K. tibetica and Kobresia humilis and the legume Oxytropis ochrocephala, using molecular methods targeting nifH gene. Diazotrophs were abundantly observed in both bulk and rhizosphere soils, as well as in roots of all three plants, but their abundance varied with plant type and soil. In both bulk and rhizosphere soils, K. tibetica showed the highest diazotroph abundance, whereas K. humilis had the lowest. In roots, O. ochrocephala and K. humilis showed the highest and the lowest diazotroph abundance, respectively. The bulk and rhizosphere soils exhibited similar diazotrophic community structure in both O. ochrocephala and K. tibetica, but were substantially distinct from the roots in both plants. Interestingly, the root diazotrophic community structures in legume O. ochrocephala and non-legume K. tibetica were similar. Diazotrophs in bulk and rhizosphere soils were more diverse than those in the roots of three plants. Rhizosphere soils of K. humilis were dominated by Actinobacteria, while rhizosphere soils and roots of K. tibetica were dominated by Verrumicrobia and Proteobacteria. The O. ochrocephala root diazotrophs were dominated by Alphaproteobacteria. These findings indicate that free-living diazotrophs abundantly and diversely occur in grassland soils dominated by non-legume plants, suggesting that these diazotrophs may play important roles in fixing nitrogen into soils on the plateau.

Laccase driven biocatalytic oxidation to reduce polymeric surface hydrophobicity: An effective pre-treatment strategy to enhance biofilm mediated degradation of polyethylene and polycarbonate plastics

Plastic pollution is a major global environmental issue due to its structural complexity and poor biodegradability. Biological approaches are appropriate due to cost effectiveness and environmental friendliness, however effective polymer degradation is still in its infancy. As biological treatments are slower than physical and chemical approaches, they could be applied in conjunction with pre-treatment techniques such as photo-oxidation, heat treatment, and chemical treatments. But these processes lead to high energy consumption and hazardous secondary pollution. To address these concerns, an enzymatic pre-treatment strategy has been proposed in this study, with an aim of promoting surface oxidation on the plastics leading to improved hydrophilicity. This in turn, facilitates the surface attachment of microbes, ultimately, accelerating biodegradation. Scanning Electron Microscopy (SEM) and Fourier Transform Infrared (FT-IR) spectroscopy analyses confirmed the surface oxidation of the polyethylene (PE) and polycarbonate (PC) plastics mediated by the action of laccase enzyme. Contact angle measurement witnessed the increased hydrophilicity of the treated plastics. Following, a potential biofilm forming microbial consortium has been employed for the biodegradation of enzyme treated plastics. SEM analysis indicated the increased formation of corrosive pits and surface aberrations on the enzymatically pre-treated plastics and Confocal Laser Scanning microscopy (CLSM) analysis exhibited the enhanced biofilm formation and exopolysaccharide deposition on the pre-treated PE and PC. In addition, X-ray photoelectron spectroscopy (XPS) revealed the reduction in the elemental composition of carbon with an increment in the oxygen composition of plastics. Gel permeation chromatography (GPC) further confirmed the greater reduction in the molecular weights of the plastics subjected to integrated enzymatic and biofilm treatment than only biofilm treated plastics. This is the first report on the integration of enzymatic pre-treatment with the biofilm mediated microbial degradation to achieve enhanced treatment of plastics which demonstrated to be a promising technology for the effective mitigation of plastic pollution.

Effects of plastic contamination on carbon fluxes in a subtropical coastal wetland of East China

Coastal wetlands are recognized as carbon sinks that play an important role in mitigating global climate change because of the strong carbon uptake by vegetation and high carbon sequestration in the soil. Over the last few decades, plastic waste pollution in coastal zones has become increasingly serious owing to high-intensity anthropogenic activities. However, the influence of plastic waste (including foam waste) accumulation in coastal wetlands on carbon flux remains unclear. In the Yangtze Estuary, we investigated the variabilities of vegetation growth, carbon dioxide (CO2) and methane (CH4) fluxes, and soil properties in a clean Phragmites australis marsh and mudflat and a plastic-polluted marsh during summer and autumn. The clean marsh showed a strong CO2 uptake capacity (a carbon sink), and the clean mudflat showed a weak CO2 sink during the measurement period. However, polluted marshes are a significant source of CO2 emissions. Regardless of the season, the gross primary production and vegetation biomass of the polluted marshes were on average 9.5 and 1.1 times lower than those in the clean marshes, respectively. Ecosystem respiration and CH4 emissions in polluted marshes were significantly higher than those in clean marshes and mudflats. Generally, the soil bulk density and salinity in polluted marshes were lower, whereas the median particle size was higher at the polluted sites than at the clean sites. Increased soil porosity and decreased salinity may favor CO2 and CH4 emissions through gas diffusion pathways and microbiological behavior. Moreover, the concentrations of heavy metals in the soil of plastic-polluted marshes were 1.24-1.49 times higher than those in the clean marshes, which probably limited vegetation growth and CO2 uptake. Our study highlights the adverse effects of plastic pollution on the carbon sink functions of coastal ecosystems, which should receive global attention in coastal environmental management.

The bioaccessibility of adsorped heavy metals on biofilm-coated microplastics and their implication for the progression of neurodegenerative diseases

Microplastic (MP) tiny fragments (< 5 mm) of conventional and specialized industrial polymers are persistent and ubiquitous in both aquatic and terrestrial ecosystem. Breathing, ingestion, consumption of food stuffs, potable water, and skin are possible routes of MP exposure that pose potential human health risk. Various microorganisms including bacteria, cyanobacteria, and microalgae rapidly colonized on MP surfaces which initiate biofilm formation. It gradually changed the MP surface chemistry and polymer properties that attract environmental metals. Physicochemical and environmental parameters like polymer type, dissolved organic matter (DOM), pH, salinity, ion concentrations, and microbial community compositions regulate metal adsorption on MP biofilm surface. A set of highly conserved proteins tightly regulates metal uptake, subcellular distribution, storage, and transport to maintain cellular homeostasis. Exposure of metal-MP biofilm can disrupt that cellular homeostasis to induce toxicities. Imbalances in metal concentrations therefore led to neuronal network dysfunction, ROS, mitochondrial damage in diseases like Alzheimer's disease (AD), Parkinson's disease (PD), and Prion disorder. This review focuses on the biofilm development on MP surfaces, factors controlling the growth of MP biofilm which triggered metal accumulation to induce neurotoxicological consequences in human body and stategies to reestablish the homeostasis. Thus, the present study gives a new approach on the health risks of heavy metals associated with MP biofilm in which biofilms trigger metal accumulation and MPs serve as a vector for those accumulated metals causing metal dysbiosis in human body.

Aging rate, environmental risk and production efficiency of the low-density polyethylene (LDPE) films with contrasting thickness in irrigated region

Physical thickness of low-density polyethylene (LDPE) films might determine the release rate of phthalic acid esters (PAEs) & structural integrity and affect production efficiency. However, this critical issue is still unclear and little reported. Aging effects were evaluated in LDPE films with the thickness of 0.006, 0.008, 0.010 and 0.015 mm in a maize field of irrigation region. The Scanning electron microscope (SEM) results showed that the proportion of damaged area (Dam) to total area of LDPE films was massively lowered with increasing thickness after aging. The highest and lowest Dam was 32.2% and 3.5% in 0.006 and 0.015 mm films respectively. Also, the variations in peak intensity of asymmetric & symmetrical stretching vibrations (ASVI & SSVI) were detected using Fourier transform infrared spectrum (FTIR), indicating that the declines in peak intensity tended to be slower with thickness. Interestingly, the declines in physical integrity were tightly associated with increasing exhalation rate of PAEs. Average releasing rate of PAEs was 38.2%, 31.4%, 31.5% and 19.7% in LDPE films from 0.006 to 0.015 mm respectively. Critically, thicker film mulching can lead to greater soil water storage at plough layer (SWS-PL) and better thermal status, accordingly harvesting higher economic benefit. Therefore, LDPE film thickening may be a solution to reduce environmental risk but improve production efficiency in arid region.

Degradation characteristics of polyethylene film by microorganisms from lake sediments

Polyethylene (PE) exists widely in many habitats as a persistent organic pollution and poses a major threat to the ecological environment. In this study, bacterial communities in freshwater lake sediments were exposed to culture media using PE films as the sole carbon source in aerobic and anaerobic microculture environments, and they were able to adhere and adapt to the PE films for a longer period of time. The results demonstrated that the pH value of the medium in the two cultural conditions was distinct, as were the rates of films weight loss and surface functional group alterations. We also concluded the certain bacterial genera from freshwater lake sediments who may be able to degrade PE films under either aerobic or anaerobic conditions. Simultaneously, the dominating bacterial communities between the medium and the film differed significantly under two cultural settings, as did the community composition, while metabolism was the primary function.

Microplastics increase soil microbial network complexity and trigger diversity-driven community assembly

The widespread existence of microplastics (MPs) in soil has been extensively demonstrated, and their presence would ineluctably change soil physicochemical properties and microbial community composition. However, there is limited understanding of how MPs affect soil microbial assembly. In this study, three different polymer types of MPs, i.e., high-density polyethylene (HDPE), polystyrene (PS), and polylactic acid (PLA), with the same particle size (100 μm) and dose (2%) were applied under the planted and unplanted condition, Pennisetum alopecuroides was chosen as a model species. Plant growth parameters, soil physicochemical properties, and microbial communities (including bacteria and eukaryotes) were determined. The assembly and the co-occurrence network of microbial communities were analyzed. Results revealed that the effect of MPs on soil physicochemical properties was type-dependent and could influenced by the presence of P . alopecuroides. MPs could enrich bacterial genera related to nitrogen cycle and some pathogens of eukaryotes. The presence of MPs changed bacterial and eukaryotic community assembly, in which diversity drove the deterministic/stochastic assembly processes. MPs addition increased the complexity of bacterial network, while had a minor effect on eukaryotic network. The inhibition of MPs on P . alopecuroides growth decayed over time, HDPE MPs was more harmful to P . alopecuroides growth than PS and PLA MPs. Our findings enormously improved our comprehensions of MPs-induced ecological impacts and interactions of soil bacterial and eukaryotic communities .

Black carbon derived from pyrolysis of maize straw and polystyrene microplastics affects soil biodiversity

Understanding the environmental correlation of microbial community under external stimulation is significant for ecological restoration. However, few studies focused on the response of soil biodiversity induced by black carbon (BC) derived from pyrolysis of straw and microplastics (MPs) due to their widespread existence in natural environment. In this study, polystyrene MPs (PS) and maize straw with different mass ratios were used as raw materials to prepare BC by pyrolysis. The surface morphology, chemical composition and sequential variations of different functional groups of BC were systematically analyzed. The leachate from BC was identified by three-dimensional excitation emission matrice (3D-EEM). The corresponding results showed that yield, value of O/C and N element content of BC decreased with more PS. The changed C content and oxygen-containing functional groups occurred. The order of functional groups of BC formed by co-pyrolysis was: C=C > C-O > C-H > Si-O-Si. The main component of leaching from BC was humic-like and fulvic-like acid. Simultaneously, the input of exogenous BC into soil affected abundance, composition and metabolic pathways of microorganisms. The study helps to understand environmental implication of BC which was pyrolyzed from maize straw and MPs, providing an idea for improving biogeochemical cycle process in soil.

Plastic litter changes the rhizosphere bacterial community of coastal dune plants

The presence of plastic litter in coastal environments like beach-dune systems has been well documented, and recent studies have shown that this pollutant can influence sand properties as well as dune vegetation. However, the effects of plastics on rhizosphere bacterial communities of dune plants have largely been neglected. This is an ecologically relevant issue since these communities may play an important role in improving plant growth and resilience of dune systems. Here, we explored the impact of plastic litter made of either non-biodegradable polymers (NBP) or biodegradable/compostable polymers (BP) on the structure and composition of rhizosphere bacterial communities associated with two widespread species along coastal European dunes, Thinopyrum junceum and Sporobolus pumilus, by using a one-year field experiment combined with metabarcoding techniques. Both plastics did not affect neither the survival nor the biomass of T. junceum plants, but they significantly increased alpha-diversity of rhizosphere bacterial communities. They also changed rhizosphere composition by increasing the abundance of the phyla Acidobacteria, Chlamydiae, and Nitrospirae, and of the family Pirellulaceae, and reducing the abundance of the family Rhizobiaceae. NBP reduced drastically the survival of S. pumilus while BP increased its root biomass compared to controls. BP also increased the abundance of the phylum Patescibacteria of the rhizosphere bacterial communities. Our findings provide the first evidence that NBP and BP can change rhizosphere bacterial communities associated with dune plants and highlight the importance of investigating how these changes can affect the resilience of coastal dunes to climate change.

Abandoned disposable masks become hot substrates for plastisphere, whether in soil, atmosphere or water

A large number of surgical masks (SMs) to be discarded indiscriminately during the spread of COVID-19. The relationship between the changes of masks entering the environment and the succession of the microorganisms on them is not yet clear. The natural aging process of SMs in different environments (water, soil, and atmosphere) was simulated, the changes and succession of the microbial community on SMs with aging time were explored. The results showed that the SMs in water environment had the highest aging degree, followed by atmospheric environment, and SMs in soil had the lowest aging degree. The results of high-throughput sequencing demonstrated the load capacity of SMs for microorganisms, showed the important role of environment in determining microbial species on SMs. According to the relative abundance of microorganisms, it is found that compared with the water environment, the microbial community on SMs in water is dominated by rare species. While in soil, in addition to rare species, there are a lot of swinging strains on the SMs. Uncovering the ageing of SMs in the environment and its association with the colonization of microorganisms will help us understand the potential of microorganisms, especially pathogenic bacteria, to survive and migrate on SMs.

Biodegradation of Plastics Induced by Marine Organisms: Future Perspectives for Bioremediation Approaches

Plastic pollution is a distinctive element of the globalized world. In fact, since the 1970s the expansion and use of plastics, particularly in the consumer and commercial sectors, has given this material a permanent place in our lives. The increasing use of plastic products and the wrong management of end-of-life plastic products have contributed to increasing environmental pollution, with negative impacts on our ecosystems and the ecological functions of natural habitats. Nowadays, plastic pollution is pervasive in all environmental compartments. As aquatic environments are the dumping points for poorly managed plastics, biofouling and biodegradation have been proposed as promising approaches for plastic bioremediation. Known for the high stability of plastics in the marine environment, this represents a very important issue to preserve marine biodiversity. In this review, we have summarized the main cases reported in the literature on the degradation of plastics by bacteria, fungi, and microalgae and the degradation mechanisms involved, to highlight the potential of bioremediation approaches to reduce macro and microplastic pollution.

Microplastic pollution in the Himalayas: Occurrence, distribution, accumulation and environmental impacts

Microplastics have been reported from various ecosystems including lakes, ponds, wetlands, mountains, and forests globally. Recent research works showed microplastic deposition and accumulation in the Himalayan mountains and adjoining ecosystems, rivers and streams. Fine particles of microplastic originating from different anthropogenic sources can travel long distances, even upwards (altitudinally) through atmospheric transport and can pollute remote and pristine locations situated in the Himalayas. Precipitation also plays a vital role in influencing deposition and fallout of microplastics in the Himalayas. Microplastics can be trapped in the snow in glaciers for a long time and can be released into freshwater rivers by snow melting. Microplastic pollution in Himalayan rivers such as the Ganga, Indus, Brahmaputra, Alaknanda, and Kosi has been researched on both the upper and lower catchments. Additionally, Himalayan region draws many domestic and international tourists throughout the year, resulting in generation of massive and unmanageable volume of plastics wastes and finally ending up in the open landscapes covering forests, river streams and valley. Fragmentation of these plastic wastes can lead to microplastic formation and accumulation in the Himalayas. This paper discusses and explains occurrence and distribution of microplastics in the Himalayan landscapes, possible adverse effects of microplastic on local ecosystems and human population and policy intervention needed to mitigate microplastic pollution in the Himalayas. A knowledge gap was noticed regarding the fate of microplastics in the freshwater ecosystems and their control mechanisms in the Indian Himalayas. Regulatory approaches for microplastics management in the Himalayas sit within the broader plastics/solid waste management and can be implemented effectively by following integrated approaches.

Enhanced degradation of microplastics during sludge composting via microbially-driven Fenton reaction

It has been increasingly documented that the hydroxyl radical (•OH) can promote the transformation of organic contaminants such as microplastics (MPs) in various environments. However, few studies have sought to identify an ideal strategy for accelerating in situ MPs degradation through boosting the process of •OH production in practical applications. In this work, iron-mineral-supplemented thermophilic composting (imTC) is proposed and demonstrated for enhancing in situ degradation of sludge-based MPs through strengthening •OH generation. The results show that the reduction efficiency of sludge-based MPs abundance was about 35.93% in imTC after treatment for 36 days, which was 38.99% higher than that of ordinary thermophilic composting (oTC). Further investigation on polyethylene-microplastics (PE-MPs) suggested that higher abundance of •OH (the maximum value was 408.1 μmol·kg^-1) could be detected on the MPs isolated from imTC through microbially-mediated redox transformation of iron oxides, as compared to oTC. Analyses of the physicochemical properties of the composted PE-MPs indicated that increased •OH generation could largely accelerate the oxidative degradation of MPs. This work, for the first time, proposes a feasible strategy to enhance the reduction efficiency of MPs abundance during composting through the regulation of •OH production.

Biofilm-Colonized versus Virgin Black Microplastics to Accelerate the Photodegradation of Tetracycline in Aquatic Environments: Analysis of Underneath Mechanisms

Tire wear particles (TWPs) exposed to the aquatic environment are rapidly colonized by microorganisms and provide unique substrates for biofilm formation, which potentially serve as vectors for tetracycline (TC) to influence their behaviors and potential risks. To date, the photodegradation capacity of TWPs on contaminants due to biofilm formation has not been quantified. To accomplish this, we examined the ability of virgin TWPs (V-TWPs) and biofilm-developed TWPs (Bio-TWPs) to photodegrade TC when exposed to simulated sunlight irradiation. V-TWPs and Bio-TWPs accelerated the photodegradation of TC, with rates (k_obs) of 0.0232 ± 0.0014 and 0.0152 ± 0.0010 h^-1, respectively (k_obs increased by 2.5-3.7 times compared to that for only TC solution). An important factor of increased TC photodegradation behavior was identified and linked to the changed reactive oxygen species (ROS) of different TWPs. The V-TWPs were exposed to light for 48 h, resulting in more ROS for attacking TC, with hydroxyl radicals (^•OH) and superoxide anions (O₂^•-) playing a dominant role in TC photodegradation measured using scavenger/probe chemicals. This was primarily due to the greater photosensitization effects and higher electron-transfer capacity of V-TWPs in comparison to Bio-TWPs. In addition, this study first sheds light on the unique effect and intrinsic mechanism of the crucial role of Bio-TWPs in TC photodegradation, enhancing our holistic understanding of the environmental behavior of TWPs and the associated contaminants.

Effect of different additions of low-density polyethylene and microplastics polyadipate/butylene terephthalate on soil bacterial community structure

The stress produced from biodegradable plastics on soil ecosystem is a rising global concern. However, effects of such microplastics (MPs) on soil ecology are still debatable. In this study, the biodegradable microplastic PBAT (polyadipate/butylene terephthalate) was used as the target object, compared with the traditional microplastic LDPE (low-density polyethylene). A pot experiment and was high-throughput sequencing analysis used to determine the effect of different additions of MPs on soil bacterial community structure and the correlation between soil bacterial community structure and chemical properties was investigated. Compared with LDPE, the results showed that EC, TN, TP, NH₄⁺-N, and NO₃^--N changed obviously with the increasing of PBAT addition (p < 0.05), but pH changed little and the community richness was significantly higher in soils with low PBAT addition than that with higher PBAT addition. PBAT is beneficial to soil nitrogen fixation, but it will significantly reduce the soil P content and affect the nitrification and denitrification reaction. It suggested that addition of PBAT MPs and its addition amount result in changes in soil fertility, community abundance, and structure and composition of bacterial communities in soil samples, while the presence of PBAT MPs might affect soil carbon-nitrogen cycle.

The content of PAEs in field soils caused by the residual film has a periodical peak

The wide use of plastic film mulch has led to the release of phthalate esters (PAEs), which seriously threatens the soil environment and the safety of crop production. However, it is unknown whether there is a maximum threshold of soil PAEs accumulation induced by plastic film residue, and the dynamic changes of soil PAEs under field conditions are still unclear. To address these issues, a field experiment was conducted to investigate the temporal fluctuations of soil PAEs content and the response of microbial community structure in the field with plastic film residue. Results showed that the content of soil PAEs fluctuated during an observation period of one year, had a periodical peak in winter and summer, and was exacerbated by the increase in the aging degree and residual amount of plastic films. The PAEs content in soil with black films was higher than the US soil allowable criteria. High-throughput sequencing analysis showed that the addition of residual film significantly increased the alpha diversity of bacterial communities, changed the structure of bacterial community, and generated significant disturbances in bacterial function. Besides, the residual film recruited more microbiota related to plastic film and PAEs degradation. Results of the present study provide insight into the dynamic variation of soil PAEs caused by plastic film residue in one year, which is important to help evaluate the pollution risk of PAEs on soils and crops caused by residual plastic film.

Dissolved organic matter derived from biodegradable microplastic promotes photo-aging of coexisting microplastics and alters microbial metabolism

Dissolved organic matter (DOM) leaching from biodegradable microplastics (BMPs) and its characteristics and corresponding environmental implication are rarely investigated. In this study, the main component of DOM leachate from the two BMPs (polyadipate/butylene terephthalate (PBAT)/polycaprolactone (PCL)) was verified by using excitation-emission matrix-parallel factor analysis (EEM-PARAFAC). The PBAT-DOM (PBOM) was aromatized and terrestrial. Comparatively, PCL-DOM (PLOM) had low molecular weight. PBOM contained protein-like components while PLOM contained tryptophan and tyrosine components. Interestingly, both PBOM and PLOM could accelerate the decomposition and oxidation of coexisting polystyrene (PS) under light irradiation. Further, the difference in composition and the properties of BMPs-DOM significantly affected its photochemical activity. The high territoriality and protein-like component of PBOM significantly promoted the generation of ¹O₂ and O₂^•-, which caused faster disruptions to the backbone of PS. Simultaneously, the microbial community's richness, diversity, and metabolism were obviously improved under the combined pressure of aged PS and BMPs-DOM. This study threw light on the overlooked contribution of DOM derived from BMPs in the aging process of NMPs and their impact on the microbial community and provided a promising strategy for better understanding of combined MPs' fate and environmental risk.

1The harm of residual plastic film and its accumulation driving factors in northwest China

The background to this research is stark and rather troubling: the ongoing accumulation of residual plastic film (RPF) in farmland ultimately threatens the sustainable development of agriculture and food security. In this study, we selected 15 counties in northern China to analyze the effect of RPF content on soil properties and crop yield and the driving factors through sampling and survey questionnaire. The linear mixed-effects model revealed the four main factors affecting RPF content, ranked as follows: plastic film mulching years > government recycling policy > spacing between rows > recycling methods (0.47493 > 0.25635 > 0.23380 > 0.17001). The contribution value of plastic film thickness was very low (R²(M) = 0.099). The plastic film width and spacing within rows did not significantly affect RPF content. The structural equation model showed that the RPF had both direct (-0.111) and indirect (-0.010) effects on maize yield. A 1 kg ha^-1 increase in RPF content decreased maize yield by 27.67 kg ha^-1. RPF did not directly affect soil organic carbon (SOC), pH, or ammonium nitrogen. RPF mainly aggravated soil salinization by increasing soil nitrate-nitrogen, available phosphorus, and available potassium, increasing SOC and decreasing pH, thus reducing crop yield. To the best of our knowledge, this is the first study to combine the driving factors of RPF accumulation and the effects of RPF on soil properties and crop yield in a large-scale sampling and survey questionnaire. RPF accumulation in the study area has aggravated soil salinization and reduced crop yields. Hence, measures are needed to alleviate the current situation. Local governments should formulate RPF recovery policies based on their actual situation. At the national level, more research is needed to develop RPF recovery machinery to improve efficiency.

Uptake, transformation, and environmental impact of zinc oxide nanoparticles in a soil-wheat system

Zinc oxide nanoparticles (ZnO-NPs) are metal-based nanomaterials, but their long-term effects on plant growth and the soil environment in the field remain unclear with most previous studies using short-term laboratory and glasshouse studies. In this study, we used a field experiment to examine the long-term effects of ZnO-NPs in a soil-wheat (Triticum aestivum) system. It was found that although ZnO-NPs had no significant effect on either yield or the concentration of other nutrients within the grain, the application of ZnO-NPs significantly increased Zn concentrations. Indeed, for grain, the application of ZnO-NPs to both the soil and foliage (SFZnO) (average of 33.1 mg/kg) significantly increased grain Zn concentrations compared to the the control treatment (21.7 mg/kg). Using in situ analyses, nutrients were found to accumulate primarily in the crease tissue and the aleurone layer of the grain, regardless of treatment. Specifically, the concentration of Zn in the aleurone layer for the SFZnO treatment was 2-3 times higher than that in the control, being >300 mg/kg, whilst the Zn concentration in the crease tissue was ca. 600 mg/kg in the SFZnO treatment, being two times higher than for the control. Although the application of ZnO-NPs increased the total Zn within the grain, it did not accumulate within the grain as ZnO-NPs with this being important for food safety, but rather mainly as Zn-phytate, with the remainder of the Zn complexed with either cysteine or phosphate. Finally, we also observed that ZnO-NPs caused fewer changes to the soil bacterial community structure and that it had no nano-specific toxicity.

Structural breakdown and phytotoxic assessments of PE degradation through acid hydrolysis, starch addition and Pseudomonas aeruginosa bioremediation

Vast amounts of plastic waste are causing serious environmental issues and urge to develop of new remediation methods. The aim of the study is to determine the role of inorganic (nitric acid), organic (starch addition), and biological (Pseudomonas aeruginosa) soil amendments on the degradation of Polyethylene (PE) and phytotoxic assessment for the growth of lettuce plant. The PE-degrading bacteria were isolated from the plastic-contaminated soil. The strain was identified as Pseudomonas aeruginosa (OP007126) and showed the highest degradation percentage for PE. PE was pre-treated with nitric acid as well as starch and incubated in the soil, whereas P. aeruginosa was also inoculated in PE-contaminated soils. Different combinations were also tested. FTIR analysis and weight reduction showed that though nitric acid was efficient in degradation, the combined application of starch and bacteria also showed effective degradation of PE. Phytotoxicity was assessed using morphological, physiological, and biochemical parameters of plant. Untreated PE significantly affected plants' physiology, resulting in a 45% reduction in leaf chlorophyll and a 40% reduction in relative water content. It also had adverse effects on the biochemical parameters of lettuce. Bacterial inoculation and starch treatment mitigated the harmful impact of stress and improved plants' growth as well as physiological and biochemical parameters; however, the nitric treatment proved phytotoxic. The observed results revealed that bacteria and starch could be effectively used for the degradation of pre-treated PE.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Direct Polyethylene Photoreforming into Exclusive Liquid Fuel over Charge-Asymmetrical Dual Sites under Mild Conditions

Direct polyethylene photoreforming to high-energy-density C₂ fuels under mild conditions is of great significance and still faces a huge challenge, which is partly attributed to the extreme instability of *CH₂CH₂ adsorbed on the traditional catalysts with single catalytic sites. Herein, charge-asymmetrical dual sites are designed to boost the adsorption of *CH₂CH₂ for direct polyethylene photoreforming into C₂ fuels under normal temperature and pressure. As a prototype, the synthetic Zr-doped CoFe₂O₄ quantum dots with charge-asymmetrical dual metal sites realize direct polyethylene photoreforming into acetic acid, with 100% selectivity of liquid fuel and the evolution rate of 1.10 mmol g^-1 h^-1, outperforming those of most previously reported photocatalysts under similar conditions. In situ X-ray photoelectron spectra, density-functional-theory calculations, and control experiments reveal the charge-asymmetrical Zr-Fe dual sites may act as the predominate catalytic sites, which can simultaneously bond with the *CH₂CH₂ intermediates for the following stepwise oxidation to form C₂ products.

Characterizing corn-straw-degrading actinomycetes and evaluating application efficiency in straw-returning experiments

Corn straw is an abundant lignocellulose resource and by-product of agricultural production. With the continuous increase in agricultural development, the output of corn straw is also increasing significantly. However, the inappropriate disposal of straw results in wasting of resources, and also causes a serious ecological crisis. Screening microorganisms with the capacity to degrade straw and understanding their mechanism of action is an efficient approach to solve such problems. For this purpose, our research group isolated three actinomycete strains with efficient lignocellulose degradation ability from soil in the cold region of China: Streptomyces sp. G1^T, Streptomyces sp. G2^T and Streptomyces sp. G3^T. Their microbial properties and taxonomic status were assessed to improve our understanding of these strains. The three strains showed typical characteristics of the genus Streptomyces, and likely represent three different species. Genome functional annotation indicated that most of their genes were related to functions like carbohydrate transport and metabolism. In addition, a similar phenomenon also appeared in the COG and CAZyme analyses, with a large number of genes encoding carbohydrate-related hydrolases, such as cellulase, glycosidase and endoglucanase, which could effectively destroy the structure of lignocellulose in corn straw. This unambiguously demonstrated the potential of the three microorganisms to hydrolyze macromolecular polysaccharides at the molecular level. In addition, in the straw-returning test, the decomposing consortium composed of the three Streptomyces isolates (G123) effectively destroyed the recalcitrant bonds between the various components of straw, and significantly reduced the content of active components in corn straw. Furthermore, microbial diversity analysis indicated that the relative abundance of Proteobacteria, reportedly associated with soil antibiotic resistance and antibiotic degradation, was significantly improved with straw returning at both tested time points. The microbial diversity of each treatment was also dramatically changed by supplementing with G123. Taken together, G123 has important biological potential and should be further studied, which will provide new insights and strategies for appropriate treatment of corn straw.

Microplastic pollution in soils, plants, and animals: A review of distributions, effects and potential mechanisms

Increasing production of synthetic plastics and poor management of plastic wastes have dramatically increased the amount of plastics in the environment. In 2014, at the first United Nations Environment Assembly, marine plastic waste pollution was listed as one of the 10 most pressing environmental issues. In addition, there is much plastic waste in terrestrial ecosystems due to substantial residues from agricultural mulching and packing. As a recently recognized pollutant, microplastics (MPs) have attracted significant attention from the public and various governments. Concentrations of MPs in the environment vary among locations, from <100 to >1 × 10⁶ particles per cubic meter. Many studies have addressed the impacts and potential mechanisms of MPs on the environment and organisms. Humans and other organisms can ingest or carry MPs in a variety of passive ways and these MPs can have a range of negative effects on metabolism, function, and health. Additionally, given their large surface area, MPs can sorb various pollutants, including heavy metals and persistent organic pollutants, with serious implications for animals and human wellbeing. However, due to their complexity and a lack of accurate determination methods, the systematic impacts of MP pollution on whole foodwebs are not clearly established. Therefore, this review summarizes current research advances in MP pollution, particularly the impact of MPs on soils, plants, and animals, and proposes potential future research prospects to better characterize MPs.

Effects of short-term soil exposure of different doses of ZnO nanoparticles on the soil environment and the growth and nitrogen fixation of alfalfa

The extensive application of nanomaterials has increased their levels in soil environments. Therefore, clarifying the process of environmental migration is important for environmental safety and human health. In this study, alfalfa was used to determine the effects of different doses of ZnO nanoparticles (NPs) on the growth of alfalfa and the soil environment. Results showed that the alfalfa biomass was inversely proportional to the exposure concentration of ZnO NPs. The Zn concentration in the alfalfa tissue and the exposure dose presented a significant positive correlation. A high concentration of ZnO NPs decreased the nitrogen-fixing area of root nodules while the number of bacteroids and root nodules, which in turn affected the nitrogen-fixing ability of alfalfa. At the same time, it caused different degrees of damage to the root nodules and root tip cells of alfalfa. A high dose of ZnO NPs decreased the relative abundance and diversity of the soil microorganisms. Therefore, short-term and high-dose exposure of ZnO NPs causes multiple toxicities in plants and soil environments.

Pollution pressure and soil depth drive prokaryotic microbial assemblage and co-occurrence patterns in an organic polluted site

Organic polluted sites have become a global concern of soil contamination, yet little is known about microbial vertical distribution and community assembly in organic polluted sites. Here, high-throughput sequencing technology was employed to investigate prokaryotic microbial diversity and community assembly along soil profile in an abandoned chemical organic contaminated site. Results showed that there was no significant difference (P > 0.05) observed in microbial alpha diversity among different soil layers, whereas the structure of microbial communities presented significantly different (P < 0.05) in the superficial layer (0-0.5 m) compared with intermediate (1-1.5 m) and bottom (2.5-3 m) layers. Soil prokaryotic microbial community evolved to possess the potential of degrading organic pollutants under long-term organic pollution stress. A relatively homogeneous environment created by the organic polluted site mainly induced the ecological process of homogeneous selection driving community assembly, while dispersal limitation gained importance with the increase of soil depth. Organic contaminants were identified as the key driver of destabilizing co-occurrence networks, while the frequent cooperative behaviors among species could combat organic pollution stress and sustain prokaryotic community stability. Collectively, pollution pressure and soil depth jointly affected prokaryotic microbial assemblage and co-occurrence that underpinned the spatial scaling patterns of organic contaminated sites microbiota.

Response of microbial community structure to chromium contamination in Panax ginseng-growing soil

Chromium (Cr) contamination in soil poses a serious security risk for the development of medicine and food with ginseng as the raw material. Microbiome are critical players in the functioning and service of soil ecosystems, but their feedback to Cr-contaminated ginseng growth is still poorly understood. To study this hypothesis, we evaluated the effects of microbiome and different Cr exposure on the soil microbial community using Illumina HiSeq high-throughput sequencing. Our results indicated that 2467 OTUs and 1785 OTUs were obtained in 16S and ITS1 based on 97% sequence similarity, respectively. Bacterial and fungal diversity were affected significantly in Cr-contaminated soil. Besides, Cr contamination significantly changed the composition of the soil bacterial and fungal communities, and some biomarkers were identified in the different classification level of the different Cr-contaminated treatments using LEfSe. Finally, a heatmap of Spearman's rank correlation coefficients and canonical discriminant analysis (CDA) indicated that Chloroflexi, Gemmatimonadetes, Acidobacteria, Verrucomicobia, and Parcubacteria in phylum level and Acidimicrobiia, Gemmatimonadetes, and Deltaproteobacteria in class level were positively correlated with AK, AP, and NO₃^--N (p < 0.05 or p < 0.01), but negatively correlated with total Cr and available Cr (p < 0.05 or p < 0.01). Similarly, in the fungal community, Tubaria, Mortierellaceae, and Rhizophagus in the phylum level and Glomeromycetes, Agaricomycetes, and Exobasidiomycetes in the class level were positively correlated with AK, AP, and NO₃^--N (p < 0.05 or p < 0.01), but negatively correlated with total Cr and available Cr (p < 0.05 or p < 0.01). Our findings provide new insight into the effects of Cr contamination on the microbial communities in ginseng-growing soil.

Photon-induced redox chemistry on pyrite promotes photoaging of polystyrene microplastics

The mineral particles in sediment could affect polystyrene microplastics (PS-MPs) prosperity through physical and chemical interactions. Pyrite with semiconducting properties is the most abundant metal sulfide mineral in the sediments of lake and river mouths. The widespread sunlight and the coexistence of PS-MPs and pyrite in lake or river water due to frequently water fluctuation is a typical photoaging environment for PS-MPs. The oxidation of reactive oxygen species (ROS) generated from pyrite would degrade the PS-MPs in theory. However, researches about photoaging of PS-MPs mediated by pyrite are paucity. Here, we investigated the photoaging process of PS-MPs affected by pyrite under simulated light condition. Remarkably, surface morphology of PS-MPs mediated by pyrite was broken. And the oxygen-containing functional group of PS-MPs increased, as revealed by Fourier Transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle test. 2D-COS analysis showed photoaging of PS-MPs with pyrite happened in the following order: C-H > C=C > C=O > C-O > OH. The photoaging of PS-MPs and transformation of intermediate were accelerated by ROS (O₂·^-, ·OH and ¹O₂) generated from pyrite. The free ·OH may play a major role in the promotion. Because the interfacial ROS reactions on pyrite surface were limited due to the electrostatic repulsion between pyrite and PS-MPs. The study explored photoaging behavior of PS-MPs accelerated by pyrite, which could be helpful for understanding photon-induced redox chemistry on PS-MPs via widespread sulfide metal minerals on earth's surface and providing further information to assess potential risks of PS-MPs.

Occurrence status of microplastics in main agricultural areas of Xinjiang Uygur Autonomous Region, China

A large number of plastic products are used in the process of agricultural production, and the recycling efficiency is low, which leads to the production of a large number of microplastics. Therefore, the microplastic contamination in agricultural areas requires being investigated urgently. In addition, the occurrence characteristics of microplastics are also different in agricultural areas with various land use modes. In this study, the main agricultural areas in Xinjiang are taken as the research object. The abundance of microplastics in the main agricultural areas in Xinjiang ranges from 288 to 1452 items/kg. The shape of microplastics is mainly bulks, and white microplastics account for the highest proportion, and the majority of their sizes are less than 0.5 mm. The risk assessment results show that the contamination risk index of microplastics in this area is 108.92 and the risk level is grade III. The research shows that there is little difference in the abundance of microplastics between paddy field and garden land, which may be because there are few sources of microplastics in the land of these two utilization modes, and the potential pollution sources are similar, such as the atmospheric deposition of microplastics, the falling of fibers on people's clothes during farming, and the agricultural use of sludge. This study can provide a reference for further study on the existing circumstances of microplastics in agricultural areas.

Plastisphere community assemblage of aquatic environment: plastic-microbe interaction, role in degradation and characterization technologies

It is undeniable that plastics are ubiquitous and a threat to global ecosystems. Plastic waste is transformed into microplastics (MPs) through physical and chemical disruption processes within the aquatic environment. MPs are detected in almost every environment due to their worldwide transportability through ocean currents or wind, which allows them to reach even the most remote regions of our planet. MPs colonized by biofilm-forming microbial communities are known as the ''plastisphere". The revelation that this unique substrate can aid microbial dispersal has piqued interest in the ground of microbial ecology. MPs have synergetic effects on the development, transportation, persistence, and ecology of microorganisms. This review summarizes the studies of plastisphere in recent years and the microbial community assemblage (viz. autotrophs, heterotrophs, predators, and pathogens). We also discussed plastic-microbe interactions and the potential sources of plastic degrading microorganisms. Finally, it also focuses on current technologies used to characterize those microbial inhabitants and recommendations for further research.

Microplastics reduce soil microbial network complexity and ecological deterministic selection

Microplastics have been proposed as emerging threats for terrestrial systems as they may potentially alter the physicochemical/biophysical soil environments. Due to the variety of properties of microplastics and soils, the microplastic-induced effects in soil ecosystems are greatly manifold. Here, we studied effects of three polymer microplastics (polyamide-6 (PA), polyethylene (PE), and polyethylene terephthalate (PET)) on soil properties with four different soil types. The success patterns, interaction relationships, and assembly processes of soil bacterial communities were also studied. Microplastics have the potential to promote CO₂ emissions and enhance soil humification. Even though microplastics did not significantly alter the diversity and composition of the soil microbial community, the application of microplastics decreased the network complexity and stability, including network size, connectivity, and the number of module and keystone species. The bacterial community assembly was governed by deterministic selection (77.3% - 90.9%) in all treatments, while microplastics increased the contribution of stochastic processes from 9.1% in control to 13.6% - 22.7%. The neutral model results also indicated most of the bacterial taxa were present in the predicted neutral region (approximately 98%), suggesting the importance of stochastic processes. These findings provided a fundamental insight in understanding the effects of microplastics on soil ecosystems. This article is protected by copyright. All rights reserved.

Photo-transformation of microplastics and its toxicity to Caco-2 cells

In recent years, microplastics (MPs) pollution, as a global environmental problem, has been widely concerned by countries all over the world. However, the research on the impact of MPs on human health is still limited. In this study, we studied the photo-transformation behavior of polystyrene microplastics (PS-MPs) under ultraviolet light and its toxicity to Caco-2 cells. Our results showed that the surface of PS-MPs was roughened by light, and cracks and pits appeared. UV-vis spectra showed that the opening of phenyl ring and the formation of carbonyl group might exist in this process. Based on FTIR and 2D-COS analysis, we observed the formation of carbonyl group and hydroxyl group, and preliminarily determined that the order of photo-transformation of PS-MPs was 698 (CH) > 752 (CH) > 1030 (CO) > 3645 (OH/OOH) > 1740 (CO). XPS showed that the photo-transformation of PS-MPs was a process in which carbon-containing functional groups were gradually partially transformed into oxygen-containing functional groups. Finally, the toxicity results showed that with the increase of PS-MPs concentration and the extension of light irradiation time, the survival rate of Caco-2 cells gradually decreased and the integrity of cell membrane was destroyed. The increased cytotoxicity can be explained at least in part by the fact that the toxicity of oxygen-containing functional groups is greater than that of carbon-containing functional groups, but how these functional groups affect the cytotoxicity of cells still needs sustained research in the future. This study can provide new insights for understanding the environmental behavior and ecological effects of PS-MPs in the environment.

The Biological Effects of 3D Resins Used in Orthodontics: A Systematic Review

Three-dimensional (3D) resin medical-dental devices have been increasingly used in recent years after the emergence of digital technologies. In Orthodontics, therapies with aligners have gained popularity, mainly due to the aggressive promotion policies developed by the industry. However, their systemic effects are largely unknown, with few studies evaluating the systemic toxicity of these materials. The release of bisphenol A and other residual monomers have cytotoxic, genotoxic, and estrogenic effects. This systematic review aims to analyze the release of toxic substances from 3D resins used in Orthodontics and their toxic systemic effects systematically. The PICO question asked was, "Does the use of 3D resins in orthodontic devices induce cytotoxic effects or changes in estrogen levels?". The search was carried out in several databases and according to PRISMA guidelines. In vitro, in vivo, and clinical studies were included. The in vitro studies' risk of bias was assessed using the guidelines for the reporting of pre-clinical studies on dental materials by Faggion Jr. For the in vivo studies, the SYRCLE risk of bias tool was used, and for the clinical studies, the Cochrane tool. A total of 400 articles retrieved from the databases were initially scrutinized. Fourteen articles were included for qualitative analysis. The risk of bias was considered medium to high. Cytotoxic effects or estrogen levels cannot be confirmed based on the limited preliminary evidence given by in vitro studies. Evidence of the release of bisphenol A and other monomers from 3D resin devices, either in vitro or clinical studies, remains ambiguous. The few robust results in the current literature demonstrate the absolute need for further studies, especially given the possible implications for the young patient's fertility, which constitutes one of the largest groups of patients using these orthodontic devices.

A review on marine plastisphere: biodiversity, formation, and role in degradation

The pollution of plastic waste has become an increasingly serious environmental crisis. Recently, plastic has been detected in various kinds of environments, even in human tissues, which is an increasing threat to the ecosystems and humans. In the ocean, the plastic waste is eventually fragmentized into microplastics (MPs) under the disruption of physical and chemical processes. MPs are colonized by microbial communities such as fungi, diatoms, and bacteria, which form biofilms on the surface of the plastic called “plastisphere”. In this review, we summarize the studies related to microorganisms in the plastisphere in recent years and describe the microbial species in the plastisphere, mainly including bacteria, fungi, and autotrophs. Secondly, we explore the interactions between MPs and the plastisphere. The depth of MPs in the ocean and the nutrients in the surrounding seawater can have a great impact on the community structure of microorganisms in the plastisphere. Finally, we discuss the types of MP-degrading bacteria in the ocean, and use the “seed bank” theory to speculate on the potential sources of MP-degrading microorganisms. Challenges and future research prospects are also discussed.

Photodegradation of microplastics mediated by different types of soil: The effect of soil components

Microplastics (MPs) have attracted considerable attention due to its worldwide distribution, environmental persistence, and ecological risks. In this work, the photodegradation of MPs mediated by five different types of soils were investigated. The results showed: after 20 d of xenon lamp irradiation, significant degradation of MP was observed on Harbin (S1), Huainan (S2), Jiangxi (S3), Shaanxi (S4) and Hainan (S5). The order of photodegradation rate of MP was S2 > S5 > S4 > S1 > S3. The components of the soil have some correlations with MPs photodegradation. The photodegradation of MP mediated by soil components (specifically, the clay, the iron oxides and MnO₂) displayed positive effect, while the photodegradation of MPs mediated by organic carbon showed inhibition trend. It is worth noting that electrostatic interaction may be the dominant factor affecting the interaction between MPs photodegradation rate and different soils surfaces. This study is helpful to deepen the understanding of the photochemical behavior of MP in soil, and is of great significance to evaluate the environmental fate and mechanism mediated by MP in soil.