From properties to toxicity: Comparing microplastics to other airborne microparticles

A metabolomics perspective on the effect of environmental micro and nanoplastics on living organisms: A review

The increasing trend regarding the use of plastics has arisen an exponential concern on the fate of their derived products to the environment. Among these derivatives, microplastics and nanoplastics (MNPs) have been featured for their associated environmental impact due to their low molecular size and high surface area, which has prompted their ubiquitous transference among all environmental interfaces. Due to the heterogenous chemical composition of MNPs, the study of these particles has focused a high number of studies, as a result of the myriad of associated physicochemical properties that contribute to the co-transference of a wide range of contaminants, thus becoming a major challenge for the scientific community. In this sense, both primary and secondary MNPs are well-known to be adscribed to industrial and urbanized areas, from which they are massively released to the environment through a multiscale level, involving the atmosphere, hydrosphere, and lithosphere. Consequently, much research has been conducted on the understanding of the interconnection between those interfaces, that motivate the spread of these contaminants to biological systems, being mostly represented by the biosphere, especially phytosphere and, finally, the anthroposphere. These findings have highlighted the potential hazardous risk for human health through different mechanisms from the environment, requiring a much deeper approach to define the real risk of MNPs exposure. As a result, there is a gap of knowledge regarding the environmental impact of MNPs from a high-throughput perspective. In this review, a metabolomics-based overview on the impact of MNPs to all environmental interfaces was proposed, considering this technology a highly valuable tool to decipher the real impact of MNPs on biological systems, thus opening a novel perspective on the study of these contaminants.

Microplastic analysis in sediments of the Elbe River by electrostatic separation and differential scanning calorimetry

This study presents the most extensive investigation of microplastic (MP) contents in sediment from the Elbe River. We employed electrostatic separation (ES) and differential scanning calorimetry (DSC) to overcome limitations of sample throughput and time-consuming analysis. In total 43 sediment samples were collected using a Van-Veen grab. Subsequently, coarse materials (d10 > 100 μm) and fine materials (d10 ≤ 100 μm) were enriched using ES and density separation. DSC was utilized for MP identification and quantification, based on the phase-transition signals of eight different polymers. MP presence was detected in 25 samples, with successful quantification in 12 samples. The MP content in coarse material samples from shoreline areas ranged from 0.52 to 1.30 mg/kg, while in fine material samples from harbor basins, it ranged from 5.0 to 44.6 mg/kg. The most prevalent polymers identified were LD-PE, HD-PE, PP, and PCL. These findings confirmed the suitability of DSC for analyzing MP in complex environmental samples. MP hotspots were identified in harbor basins, where natural sedimentation processes and increased anthropogenic activities contribute to MP accumulation. Additionally, industrial sewage potentially contributed to MP content in sediment samples. The highest pollution levels were observed in the middle Elbe, between the confluences of Mulde and Havel. Lowest MP contents were found in the lower Elbe, potentially influenced by tides. Future studies should focus on holistic investigations of selected river sections, encompassing sediment, water, and biota samples, rather than the entire catchment area. This approach would facilitate the generation of spatiotemporal data on MP distribution in freshwater streams. In addition, more research is needed to explore potential interactions between different MP and sediment types during DSC measurements.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (μFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 μm range, while the few fragments found were mostly grouped below 50 μm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Multi-method analysis of microplastic distribution by flood frequency and local topography in Rhine floodplains

Rivers are important transport pathways for microplastics into the ocean, but they can also be potential sinks due to microplastic deposition in the sediments of the river bed and adjacent floodplains. In particular, floods can (re)mobilise microplastics from sediments and floodplains, (re)deposit and relocate them depending on the floodplain topography. The knowledge about fluvial microplastic input to floodplains, their spatial distribution and their fate in floodplain soils is limited. To investigate this topic, we sampled soil at a depth of 5-20 cm along three transects in three different Rhine floodplains. We analysed the soil samples in tandem with pyrolysis GC/MS and ATR- & μ-FPA-FTIR for their microplastic abundance and mass concentrations. To study the influence of flood frequency on the microplastic abundance in the three floodplains, we fitted a hydrodynamic flood model (MIKE 21, DHI, Hørsholm, Denmark) and related the results to the respective spatial microplastic distribution. We found similar microplastic distribution patterns in each floodplain. The highest microplastic abundance (8516-70,124 microplastics kg-1) and mass concentration (46.2-141.6 mg kg-1) were consistently found in the farthest transects from the Rhine in a topographical depression. This microplastic distribution pattern is detectable with both, pyrolysis GC/MS and FTIR. The strongest correlation between the results of both methods was found for small, abundant microplastic particles. Our results suggest that the spatial distribution of microplastics in floodplains is related to the combination of flood frequency and local topography, that ought to be explicitly considered in future studies conducted in floodplains. Finally, our results indicate that pyrolysis GC/MS and FTIR data are comparable under certain conditions, which may help in the decision for the analytical method and sampling design in future studies.

In vitro cell-transforming potential of secondary polyethylene terephthalate and polylactic acid nanoplastics

Continuous exposure to plastic pollutants may have serious consequences on human health. However, most toxicity assessments focus on non-environmentally relevant particles and rarely investigate long-term effects such as cancer induction. The present study assessed the carcinogenic potential of two secondary nanoplastics: polyethylene terephthalate (PET) particles generated from plastic bottles, and a biodegradable polylactic acid material, as respective examples of environmentally existing particles and new bioplastics. Pristine polystyrene nanoplastics were also included for comparison. A broad concentration range (6.25-200 μg/mL) of each nanoplastic was tested in both the initiation and promotion conditions of the regulatory assessment-accepted in vitro Bhas 42 cell transformation assay. Parallel cultures allowed confirmation of the efficient cellular internalisation of the three nanoplastics. Cell growth was enhanced by polystyrene in the initiation assay, and by PET in both conditions. Moreover, the number of transformed foci was significantly increased only by the highest PET concentration in the promotion assay, which also showed dose-dependency, indicating that nano PET can act as a non-genotoxic tumour promotor. Together, these findings support the carcinogenic risk assessment of nanoplastics and raise concerns regarding whether real-life co-exposure of PET nanoplastics and other environmental pollutants may result in synergistic transformation capacities.

Regression analysis for the determination of microplastics in sediments using differential scanning calorimetry

This research addresses the growing need for fast and cost-efficient methods for microplastic (MP) analysis. We present a thermo-analytical method that enables the identification and quantification of different polymer types in sediment and sand composite samples based on their phase transition behavior. Differential scanning calorimetry (DSC) was performed, and the results were evaluated by using different regression models. The melting and crystallization enthalpies or the change in heat capacity at the glass transition point were measured as regression analysis data. Ten milligrams of sea sand was spiked with 0.05 to 1.5 mg of microplastic particles (size: 100 to 200 µm) of the semi-crystalline polymers LD-PE, HD-PE, PP, PA6, and PET, and the amorphous polymers PS and PVC. The results showed that a two-factorial regression enabled the unambiguous identification and robust quantification of different polymer types. The limits of quantification were 0.13 to 0.33 mg and 0.40 to 1.84 mg per measurement for semi-crystalline and amorphous polymers, respectively. Moreover, DSC is robust with regard to natural organic matrices and allows the fast and non-destructive analysis of microplastic within the analytical limits. Hence, DSC could expand the range of analytical methods for microplastics and compete with perturbation-prone chemical analyses such as thermal extraction-desorption gas chromatography-mass spectrometry or spectroscopic methods. Further work should focus on potential changes in phase transition behavior in more complex matrices and the application of DSC for MP analysis in environmental samples.

Wearing face masks as a potential source for inhalation and oral uptake of inanimate toxins - A scoping review

BACKGROUND

From 2020 to 2023 many people around the world were forced to wear masks for large proportions of the day based on mandates and laws. We aimed to study the potential of face masks for the content and release of inanimate toxins.

METHODS

A scoping review of 1003 studies was performed (database search in PubMed/MEDLINE, qualitative and quantitative evaluation).

RESULTS

24 studies were included (experimental time 17 min to 15 days) evaluating content and/or release in 631 masks (273 surgical, 228 textile and 130 N95 masks). Most studies (63%) showed alarming results with high micro- and nanoplastics (MPs and NPs) release and exceedances could also be evidenced for volatile organic compounds (VOCs), xylene, acrolein, per-/polyfluoroalkyl substances (PFAS), phthalates (including di(2-ethylhexyl)-phthalate, DEHP) and for Pb, Cd, Co, Cu, Sb and TiO2.

DISCUSSION

Of course, masks filter larger dirt and plastic particles and fibers from the air we breathe and have specific indications, but according to our data they also carry risks. Depending on the application, a risk-benefit analysis is necessary.

CONCLUSION

Undoubtedly, mask mandates during the SARS-CoV-2 pandemic have been generating an additional source of potentially harmful exposition to toxins with health threatening and carcinogenic properties at population level with almost zero distance to the airways.

Intravenous hypertonic fluids as a source of human microplastic exposure

This study investigates the presence of microplastics (MPs) in hypertonic fluid solutions, a widely used medical treatment packaged predominantly in plastic. For this purpose, in this study, 13 hypertonic fluid samples from different brands and two different types of packaging (polypropylene and polyvinyl chloride) were analyzed using visual particle counting, µ-Raman microscopy and ATR-FTIR. The results reveal the pervasive presence of MPs in all samples, with an estimated average concentration of 62.82 ± 72.38 MPs/1000 mL. There was no statistically significant difference in MP concentration between PP and PVC packaging. The particles predominantly consisted of fragments (74.1%) and fibers (25.9%), ranging in size from 0.04 to 2.37 mm. µ-Raman analysis identified 12 synthetic polymers as well as cellulose, with polyethylene and cellulose being the most prevalent. In conclusion, this study underscores the alarming presence of MPs in hypertonic fluid solutions, raising concerns about potential health risks.

Spray-Dried Chitosan Hydrogel Particles as a Potential Delivery System for Benzydamine Hydrochloride

Chitosan, being a biocompatible and mucoadhesive polysaccharide, is one of the most preferred hydrogel-forming materials for drug delivery. The objectives of the present study are to obtain spray-dried microparticles based on low-molecular-weight chitosan and study their potential application as cargo systems for the orally active drug benzydamine hydrochloride. Three types of particles are obtained: raw chitosan particles (at three different concentrations), cross-linked with sodium tripolyphosphate (NaTPP) particles (at three different chitosan:NaTPP ratios), and particles coated with mannitol (at three different chitosan:mannitol ratios), all of them in the size range between 1 and 10 µm. Based on the loading efficiency and the yields of the formulated hydrogel particles, one model of each type is chosen for further investigation of the effect of the cross-linker or the excipient on the properties of the gel structures. The morphology of both empty and benzydamine hydrochloride-loaded chitosan particles was examined by scanning electron microscopy, and it was quite regular and spherical. Interactions and composition in the samples are investigated by Fourier-transformed infrared spectroscopy. The thermal stability and phase state of the drug and drug-containing polymer matrixes were tested by differential scanning calorimetry and X-ray powdered diffraction, revealing that the drug underwent a phase transition. A drug release kinetics study of the chosen gel-based structures in simulated saliva buffer (pH = 6.8) and mathematical modeling of the process were performed, indicating the Weibull model as the most appropriate one.

Human Exposure to Ambient Atmospheric Microplastics in a Megacity: Spatiotemporal Variation and Associated Microorganism-Related Health Risk

Microplastics are found in various human tissues and are considered harmful, raising concerns about human exposure to microplastics in the environment. Existing research has analyzed indoor and occupational scenarios, but long-term monitoring of ambient atmospheric microplastics (AMPs), especially in highly polluted urban regions, needs to be further investigated. This study estimated human environmental exposure to AMPs by considering inhalation, dust ingestion, and dermal exposure in three urban functional zones within a megacity. The annual exposure quantity was 7.37 × 104 items for children and 1.06 × 105 items for adults, comparable with the human microplastic consumption from food and water. Significant spatiotemporal differences were observed in the characteristics of AMPs that humans were exposed to, with wind speed and rainfall frequency mainly driving these changes. The annual human AMP exposure quantity in urban green land spaces, which were recognized as relatively low polluted zones, was comparable with that in public service zones and residential zones. Notably, significant positive correlations between the AMP characteristics and the pathogenicity of the airborne bacterial community were discovered. AMP size and immune-mediated disease risks brought by atmospheric microbes showed the most significant relationship, where Sphingomonas might act as the potential key mediator.

A reliable method to determine airborne microplastics using quantum cascade laser infrared spectrometry

The number of studies dealing with airborne microplastics (MPs) is increasing but sampling and sample treatment are not standardized, yet. Here, a fast and reliable method to characterize MPs is presented. It involves the study of two passive sampling devices to collect atmospheric bulk deposition (wet and dry deposition) and three digestion methods (two alkaline-oxidative and an oxidative) to treat the samples. The alkaline-oxidative method based on KOH and NaClO was selected for a mild organic matrix digestion. In addition, some operational parameters of a high-throughput quantum cascade laser-based infrared device (LDIR) were optimized: an effective automatic tiered approach to differentiate fibres from particles (>90 % success in validation) and a criterion to establish positive matches when comparing an unknown spectrum against the spectral database (proposed match index > 0.85). The procedural analytical recoveries were very good for particles (82-90 %) and slightly lower for fibres (62-73 %). Finally, the amount and type of MPs deposited at a sub-urban area NW Spain were evaluated. Most common polymers were Polyethylene (PE), Polypropylene (PP) and Polyethylene terephthalate (PET). The deposition rates ranged 98-1220 MP/m2/day, ca. 1.7 % of the total collected particles. More than 50 % of the total MPs deposited were in the 20-50 μm size range, whereas fibres were mostly in the 50-500 μm size range.

Polystyrene nanoplastics-induced lung apoptosis and ferroptosis via ROS-dependent endoplasmic reticulum stress

It has been shown that exposure to nanoplastics (MNPs) through inhalation can induce pulmonary toxicity, but the toxicological mechanism of MNPs on the respiratory system remains unclear. Therefore, we explored the toxicological mechanism of exposure to polystyrene nanoplastics (PS-NPs) (0.05, 0.15, 0.2 mg/mL) on BEAS-2B cells. Results revealed that PS-NPs induce oxidative stress, increased apoptosis rate measured by flow cytometry, the key ferroptosis protein (GPX4 and FTH1) reduction, increased iron content, mitochondrial alterations, and increased malondialdehyde (MDA) level. Besides, consistent results were observed in mice exposed to PS-NPs (5 mg/kg/2d, 10 mg/kg/2d). Thus, we proved that PS-NPs induced cell death and lung damage through apoptosis and ferroptosis. In terms of mechanism, the elevation of the endoplasmic reticulum (ER) stress protein expression (IRE1α, PERK, XBP1S, and CHOP) revealed that PS-NPs induce lung damage by activating the two main ER stress pathways. Furthermore, the toxicological effects of PS-NPs observed in this study are attenuated by the ROS inhibitor N-acetylcysteine (NAC). Collectively, NPs-induced apoptosis and ferroptosis are attenuated by NAC via inhibiting the ROS-dependent ER stress in vitro and in vivo. This improves our understanding of the mechanism by which PS-NPs exposure leads to pulmonary injury and the potential protective effects of NAC.

Microplastics and chemical leachates from plastic pipes are associated with increased virulence and antimicrobial resistance potential of drinking water microbial communities

There is increasing recognition of the potential impacts of microplastics (MPs) on human health. As drinking water is the most direct route of human exposure to MPs, there is an urgent need to elucidate MPs source and fate in drinking water distribution system (DWDS). Here, we showed polypropylene random plastic pipes exposed to different water quality (chlorination and heating) and environmental (freeze-thaw) conditions accelerated MPs generation and chemical leaching. MPs showed various morphology and aggregation states, and chemical leaches exhibited distinct profiles due to different physicochemical treatments. Based on the physiological toxicity of leachates, oxidative stress level was negatively correlated with disinfection by-products in the leachates. Microbial network analysis demonstrated exposure to leachates (under three treatments) undermined microbial community stability and increased the relative abundance and dominance of pathogenic bacteria. Leachate physical and chemical properties (i.e., MPs abundance, hydrodynamic diameter, zeta potential, total organic carbon, dissolved ECs) exerted significant (p < 0.05) effects on the functional genes related to virulence, antibiotic resistance and metabolic pathways. Notably, chlorination significantly increased correlations among pathogenic bacteria, virulence genes, and antibiotic resistance genes. Overall, this study advances the understanding of direct and indirect risks of these MPs released from plastic pipes in the DWDS.

Nominally identical microplastic models differ greatly in their particle-cell interactions

Due to the abundance of microplastics in the environment, research about its possible adverse effects is increasing exponentially. Most studies investigating the effect of microplastics on cells still rely on commercially available polystyrene microspheres. However, the choice of these model microplastic particles can affect the outcome of the studies, as even nominally identical model microplastics may interact differently with cells due to different surface properties such as the surface charge. Here, we show that nominally identical polystyrene microspheres from eight different manufacturers significantly differ in their ζ-potential, which is the electrical potential of a particle in a medium at its slipping plane. The ζ-potential of the polystyrene particles is additionally altered after environmental exposure. We developed a microfluidic microscopy platform to demonstrate that the ζ-potential determines particle-cell adhesion strength. Furthermore, we find that due to this effect, the ζ-potential also strongly determines the internalization of the microplastic particles into cells. Therefore, the ζ-potential can act as a proxy of microplastic-cell interactions and may govern adverse effects reported in various organisms exposed to microplastics.

Effect of microplastics deposition on human lung airways: A review with computational benefits and challenges

Microplastics have become omnipresent in the environment, including the air we inhale, the water we consume, and the food we eat. Despite limited research, the accumulation of microplastics within the human respiratory system has garnered considerable interest because of its potential implications for health. This review offers a comprehensive examination of the impacts stemming from the accumulation of microplastics on human lung airways and explores the computational benefits and challenges associated with studying this phenomenon. The existence of microplastics in the respiratory system can lead to a range of adverse effects. Research has indicated that microplastics can induce inflammation, oxidative stress, and impaired lung function. Furthermore, the small size of microplastics allows them to penetrate deep into the lungs, reaching the alveoli, where gas exchange takes place. This raises concerns about long-term health consequences, such as the development of respiratory diseases and the potential for translocation to other organs. Computational approaches have been instrumental in understanding the impact of microplastic deposition on human lung airways. Computational models and simulations enable the investigation of particle dynamics, deposition patterns, and interaction mechanisms at various levels of complexity. However, studying microplastics in the lung airways using computational methods presents several challenges. The complex anatomy and physiological processes of the respiratory system require accurate representation in computational models. Obtaining relevant data for model validation and parameterization remains a significant hurdle. Additionally, the diverse nature of microplastics, including variations in size, shape, and chemical composition, poses challenges in capturing their full range of behaviours and potential toxicological effects.

Microplastics in the atmosphere: Adsorb on leaves and their effects on the phyllosphere bacterial community

Phyllosphere is the largest interface between the atmosphere and terrestrial ecosystems and serves as a major sink for atmospheric microplastics (MPs). It is also a unique habitat for microbiota with diverse ecological functions. This field study investigated the characteristics of atmospheric MPs adsorbed on leaves with automatic technology, and found their abundance was 3.62 ± 1.29 items cm-2. MPs on leaves were mainly below 80 µm, and dominated by polyamide, polyethene, and rubber. MPs on leaves correlated significantly with the structure and functions of the phyllosphere bacterial community (PBC). Both the MPs abundance and size distribution (MSD) were positively correlated with the α diversity and negatively correlated with the β diversity and network complexity of PBC. PBC functions of environmental and genetic information process were negatively correlated with MPs abundance, and functions related to human diseases and cellular process were positively correlated with MSD significantly. The relative abundance of Sphingomonas was significantly correlated with the MSD, suggesting that Sphingomonas might emerge as the key genus involved in the pathogenicity of PBC mediated by MPs. These results highlighted the ecological health risks of atmospheric MPs as they can be transferred anywhere and potentially increase the pathogenicity of local phyllosphere microflora.

Systematic review of microplastics and nanoplastics in indoor and outdoor air: identifying a framework and data needs for quantifying human inhalation exposures

BACKGROUND

Humans are likely exposed to microplastics (MPs) in a variety of places including indoor and outdoor air. Research to better understand how exposure to MPs correlates to health is growing. To fully understand the possible impacts of MPs on human health, it is necessary to quantify MP exposure and identify what critical data gaps exist.

OBJECTIVES

The current paper provides a human exposure assessment of microplastics in the air using systematically reviewed literature that provided concentration of MPs in air as well as doses used in toxicology studies to calculate inhalation exposure dose.

METHODS

All published peer-reviewed journal articles, non-published papers, and grey literature that focused on micro- or nano-plastics in indoor and outdoor air were systematically searched using PRISMA guidelines. Literature that defined specific concentrations and size of MPs in air or exposed to human lung cells, animals, or humans with measurable health impacts were included in data extraction. Inhalational exposures were calculated for different age groups using published MP concentrations from the included literature using exposure dose equations and values from U.S. ATSDR and EPA.

RESULTS

Calculated mean indoor inhalational exposures from passive sampling methods were higher than those calculated from active sampling methods. When comparing indoor and outdoor sampling, calculated inhalation exposures from indoor samples were greater than those from outdoor samples. Inhalation exposures of MPs differed between age groups with infants having the highest calculated dose values for all locations followed by preschool age children, middle-school aged children, pregnant women, adolescents, and non-pregnant adults. MP doses used in toxicology studies produced higher calculated mean inhalational exposures than those from environmental samples.

IMPACT

This study is the first known systematic review of inhalational MP exposure from indoor and outdoor air. It also provides inhalational exposures calculated from previously published environmental samples of MPs as well as from toxicology studies.

[Mechanisms of Cell Toxicity Caused by Degraded Microplastics]

Microplastics (MPs), defined as plastic particles less than 5 mm in size, are ubiquitous in the environment. The accumulation of MPs in various environmental compartments, such as the ocean, soil, and air, has raised considerable concerns regarding their impact on ecological systems, including marine life and human health. Notably, MPs have been detected in marine organisms such as shellfish and fish, and have even been found in the human body, including in the blood and placenta. Moreover, considering that MPs have been detected in drinking water, human exposure to these particles in daily life is inevitable. To assess the risk posed by MPs to human health, it is essential to consider their physiological and chemical properties, including size, shape, surface modification, and material composition. However, current risk analyses focus primarily on spherical MPs with smooth surfaces, which differ substantially from most of the MPs detected in the environment. Environmental factors, such as ocean waves and ultraviolet radiation, alter the properties of MPs, including size, shape, and surface characteristics. In this review, we summarize current research on MPs, with a particular emphasis on the effects of MP degradation on human health. Furthermore, we generated MPs with surface degradation and evaluated their impact on cell toxicity, along with the underlying biological mechanisms.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 μm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

Anthropogenic debris ingestion in a tropical seabird community: Insights from taxonomy and foraging distribution

Oceans have been considered as an unlimited supply of goods and services, but resource extraction and waste disposal became ubiquitous and have been damaging the health of marine ecosystems. Finding suitable sentinel species of the human impacts on the oceans is thus imperative, since they may work as early warnings of disruptive situations. In this study, we investigated how taxonomy and foraging distribution influenced the occurrence of anthropogenic debris among five seabird species inhabiting the tropical Atlantic region. Occurrence of anthropogenic debris was assessed using faeces of breeding individuals as a proxy of ingestion. A total of 268 particles were extracted from all samples. The categories "fragments" and "fibres", as well as the colour "blue", were the most prevalent characteristics across species. There was a high diversity of polymers from cellulosic particles to synthetic plastics (Anthropogenic Cellulosic 26.9 %; Polyester 7.7 %; Varnish 5.8 %; Polypropylene 1.9 %). Species with a more coastal foraging strategy exhibited higher occurrence and number of anthropogenic debris when compared to species foraging comparably more in pelagic areas. This suggests that anthropogenic debris are more prevalent in coastal foraging areas, where human activities occur in higher number and frequency (e.g., fisheries) and sources of freshwater input from inland are at close distance. These results provide more evidence to the growing perception on the ubiquity and diversity of anthropogenic debris in the marine environment, and further support the usefulness of using seabirds as bio-indicators of anthropogenic pollution in both neritic and oceanic regions.

From air to airway: Dynamics and risk of inhalable bacteria in municipal solid waste treatment systems

Municipal solid waste treatment (MSWT) system emits a cocktail of microorganisms that jeopardize environmental and public health. However, the dynamics and risks of airborne microbiota associated with MSWT are poorly understood. Here, we analyzed the bacterial community of inhalable air particulates (PM10, n = 71) and the potentially exposed on-site workers' throat swabs (n = 30) along with waste treatment chain in Shanghai, the largest city of China. Overall, the airborne bacteria varied largely in composition and abundance during the treatment (P < 0.05), especially in winter. Compared to the air conditions, MSWT-sources that contributed to 15 ∼ 70% of airborne bacteria more heavily influenced the PM10-laden bacterial communities (PLS-SEM, β = 0.40, P < 0.05). Moreover, our year-span analysis found PM10 as an important media spreading pathogens (104 ∼ 108 copies/day) into on-site workers. The machine-learning identified Lactobacillus and Streptococcus as pharynx-niched featured biomarker in summer and Rhodococcus and Capnocytophaga in winter (RandomForest, ntree = 500, mtry = 10, cross = 10, OOB = 0%), which closely related to their airborne counterparts (Procrustes test, P < 0.05), suggesting that MSWT a dynamic hotspot of airborne bacteria with the pronounced inhalable risks to the neighboring communities.

Urban dust particles disrupt mitotic progression by dysregulating Aurora kinase B-related functions

Particulate matter (PM), a major component of outdoor air pollution, damages DNA and increases the risk of cancer. Although the harmful effects of PM at the genomic level are known, the detailed mechanism by which PM affects chromosomal stability remains unclear. In this study, we investigated the novel effects of PM on mitotic progression and identified the underlying mechanisms. Gene set enrichment analysis of lung cancer patients residing in countries with high PM concentrations revealed the downregulation of genes associated with mitosis and mitotic structures. We also showed that exposure of lung cancer cells in vitro to urban dust particles (UDPs) inhibits cell proliferation through a prolonged M phase. The mitotic spindles in UDP-treated cells were hyperstabilized, and the number of centrioles increased. The rate of ingression of the cleavage furrow and actin clearance from the polar cortex was reduced significantly. The defects in mitotic progression were attributed to inactivation of Aurora B at kinetochore during early mitosis, and spindle midzone and midbody during late mitosis. While previous studies demonstrated possible links between PM and mitosis, they did not specifically identify the dysregulation of spatiotemporal dynamics of mitotic proteins and structures (e.g., microtubules, centrosomes, cleavage furrow, and equatorial and polar cortex), which results in the accumulation of chromosomal instability, ultimately contributing to carcinogenicity. The data highlight the novel scientific problem of PM-induced mitotic disruption. Additionally, we introduce a practical visual method for assessing the genotoxic outcomes of airborne pollutants, which has implications for future environmental and public health research.

Differences in microplastic degradation in the atmosphere and coastal water environment from two island nations: Japan and New Zealand

Microplastics are subject to environmental forces that can change polymer organization on a molecular scale. However, it is not clear to what extent these changes occur in the environment and whether microplastics in the atmospheric and water environment differ. Here we identify structural differences between microplastics in the atmosphere and water environment from Japan and New Zealand, representing two archipelagos differing in their proximity to nearby countries and highly populated areas. We first highlight the propensity for smaller microplastics to arrive via air masses from the Asian continent to the Japan Sea coastal area, while New Zealand received larger, locally derived microplastics. Analyses of polyethylene in the Japanese atmosphere indicate that microplastics transported to the Japanese coastal areas were more crystalline than polyethylene particles in the water, suggesting that the plastics arriving by air were relatively more aged and brittle. By contrast, polypropylene particles in New Zealand waters were more degraded than the microplastic particles in the air. Due to the lack of abundance, both polyethylene and polypropylene could not be analyzed for both countries. Nevertheless, these findings show the structural variation in microplastics between environments in markedly different real-world locations, with implications for the toxic potential of these particles.

Sources, Degradation, Ingestion and Effects of Microplastics on Humans: A Review

Celluloid, the predecessor to plastic, was synthesized in 1869, and due to technological advancements, plastic products appear to be ubiquitous in daily life. The massive production, rampant usage, and inadequate disposal of plastic products have led to severe environmental pollution. Consequently, reducing the employment of plastic has emerged as a pressing concern for governments globally. This review explores microplastics, including their origins, absorption, and harmful effects on the environment and humans. Several methods exist for breaking down plastics, including thermal, mechanical, light, catalytic, and biological processes. Despite these methods, microplastics (MPs, between 1 and 5 mm in size) continue to be produced during degradation. Acknowledging the significant threat that MPs pose to the environment and human health is imperative. This form of pollution is pervasive in the air and food and infiltrates our bodies through ingestion, inhalation, or skin contact. It is essential to assess the potential hazards that MPs can introduce. There is evidence suggesting that MPs may have negative impacts on different areas of human health. These include the respiratory, gastrointestinal, immune, nervous, and reproductive systems, the liver and organs, the skin, and even the placenta and placental barrier. It is encouraging to see that most of the countries have taken steps to regulate plastic particles. These measures aim to reduce plastic usage, which is essential today. At the same time, this review summarizes the degradation mechanism of plastics, their impact on human health, and plastic reduction policies worldwide. It provides valuable information for future research on MPs and regulatory development.

A novel simplified method for extraction of microplastic particles from face scrub and laundry wastewater

Microplastic pollution in different environmental matrices is a serious concern in the recent times. Personal care products and washing of synthetic fabrics are some of the main sources of microplastic pollution. In this work, a novel simplified, effective and sustainable method for extraction of microplastic particles from face scrub and laundry wastewater was developed. Different parameters affecting the extraction were analysed and the extraction process was optimised. The extraction efficiency of the proposed method was found to be ~ 94.1 ± 1.65%, which was slightly better than the previously available method with an advantage of ease in extraction and lesser time and resource consuming. The developed method was used to demonstrate the extraction of microplastic particles from 12 face scrub samples with different brands. It was found that the samples contained microplastic particles of varying size. The physical and chemical structure intactness of microplastic particles during the extraction was also analysed and found to be acceptable. The developed extraction method was also applied for the extraction of microfibers from the laundry wastewater. It was found that this proposed method is suitable to make the cleaner extracted samples for an easy and more effective qualitative and quantitative analysis of MPs.

The detrimental effects of micro-and nano-plastics on digestive system: An overview of oxidative stress-related adverse outcome pathway

With the massive manufacture and use of plastics, plastic pollution-related environmental impacts have raised great concern in recent years. As byproducts of plastic fragmentation and degradation, microplastics (MPs) and nanoplastics (NPs) have been identified as novel pollutants that posed a threat to the ecosystem and humans. Since MPs/NPs could be transported via the food chain and retained in the water, the digestive system should be one of the major targets of MPs/NPs-related toxicity. Although considerable evidence has supported the digestive toxicity of MPs/NPs, the proposed mechanisms remained ambiguous due to the variety of study types, models, and endpoints. This review provided a mechanism-based perspective on MPs/NPs-induced digestive effects by adopting the adverse outcome pathway framework as a promising tool. The overproduction of reactive oxygen species was identified as the molecular initiating event in MPs/NPs-mediated injury to the digestive system. A series of detrimental effects including oxidative stress, apoptosis, inflammation, dysbiosis, and metabolic disorders were summarized as key events. Finally, the occurrence of these effects eventually led to an adverse outcome, suggesting a possible increase in the incidence of digestive morbidity and mortality.

Phytolith particulate matter and its potential human and environmental effects

Particulate matter from both natural and anthropogenic sources is known to affect air quality and human health. However, the abundance and varied composition of the suspended particulate matter make it difficult to locate the precise precursors for some of these atmospheric pollutants. Plants deposit appreciable quantities of microscopic biogenic silica in and/or between their cells, known as phytoliths, which get released into the soil surface after the death and decomposition of plants. Dust storms from exposed terrains, forest fires, and stubble burning disperse these phytoliths into the atmosphere. Their durability, chemical composition, and diverse morphology prompt us to view phytoliths as a possible particulate matter that could impact air quality, climate, and human health. Estimating the phytolith particulate matter, its toxicity, and environmental impacts will help take effective and targeted policies for improving air quality and decreasing health risks.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

A spectroscopic study on orthodontic aligners: First evidence of secondary microplastic detachment after seven days of artificial saliva exposure

Clear orthodontic aligners have recently seen increasing popularity. The thermoplastic materials present several advantages, even if it is known that all plastic products can be subjected to environmental and mechanical degradation, leading to the release of microplastics (MPs). Their ingestion could cause oxidative stress and inflammatory lesions. This study aims to evaluate the potential detachment of MPs by clear aligners due to mechanical friction simulated with a 7-day protocol in artificial saliva. The study was performed on orthodontic clear aligners from different manufacturers: Alleo (AL); FlexiLigner (FL); F22 Aligner (F22); Invisalign® (INV); Lineo (LIN); Arc Angel (ARC), and Ortobel Aligner (OR). For each group, two aligners were immersed in artificial saliva for 7 days and stirred for 5 h/day, simulating the physiological teeth mechanical friction. After 7 days, the artificial saliva was filtered; then, filters were analyzed by Raman Microspectroscopy (RMS) and Scanning Electron Microscopy (SEM), respectively to chemically identify the polymeric matrix and to measure the number and size of the detected MPs. RMS spectra revealed that AL, FL, LIN, ARC, and OR aligners were composed by polyethylene terephthalate, while F22 and INV ones by polyurethane. SEM analysis showed that the highest number of MPs was found in ARC and the lowest in INV (p < 0.05). As regards MPs' size, no statistically significant difference was found among groups, with most MPs ranging from 5 to 20 μm. Noteworthy, a highly significant correlation (p < 0.0001) was highlighted between the distribution of MPs size and the different typologies of aligners. This in vitro study highlighted for the first time the detachment of MPs from clear aligners due to mechanical friction. This evidence may represent a great concern in the clinical practice since it could impact human general health.

Processing of carbon-reinforced construction materials releases PM2.5 inducing inflammation and (secondary) genotoxicity in human lung epithelial cells and fibroblasts

Building demolition following domestic fires or abrasive processing after thermal recycling can release particles harmful for the environment and human health. To mimic such situations, particles release during dry-cutting of construction materials was investigated. A reinforcement material consisting of carbon rods (CR), carbon concrete composite (C³) and thermally treated C³ (ttC³) were physicochemically and toxicologically analyzed in monocultured lung epithelial cells, and co-cultured lung epithelial cells and fibroblasts at the air-liquid interface. C³ particles reduced their diameter to WHO fibre dimensions during thermal treatment. Caused by physical properties or by polycyclic aromatic hydrocarbons and bisphenol A found in the materials, especially the released particles of CR and ttC³ induced an acute inflammatory response and (secondary) DNA damage. Transcriptome analysis indicated that CR and ttC³ particles carried out their toxicity via different mechanisms. While ttC³ affected pro-fibrotic pathways, CR was mostly involved in DNA damage response and in pro-oncogenic signaling.

Atmospheric microplastics: exposure, toxicity, and detrimental health effects

Microplastics (MPs) are micro-particulate pollutants present in all environments whose ubiquity leads humans to unavoidable exposure. Due to low density, MPs also accumulate in the atmosphere, where they are easily transported worldwide and come into direct contact with the human body by inhalation or ingestion, causing detrimental health effects. This literature review presents the sources of atmospheric MPs pollution, transport routes, physicochemical characteristics, and environmental interactions. The document also explains the implications for human health and analyzes the risk of exposure based on the potential toxicity and the concentration in the atmosphere. MPs' toxicity lies in their physical characteristics, chemical composition, environmental interactions, and degree of aging. The abundance and concentration of these microparticles are associated with nearby production sources and their displacement in the atmosphere. The above elements are presented in an integrated way to facilitate a better understanding of the associated risk. The investigation results encourage the development of future research that delves into the health implications of exposure to airborne MPs and raises awareness of the risks of current plastic pollution to promote the establishment of relevant mitigation policies and procedures.

Greater willingness to reduce microplastics consumption in Mexico than in Spain supports the importance of legislation on the use of plastics

Introduction

Microplastics (MP) threaten all organisms worldwide. MP are produced directly as microbeads in cosmetics and hygiene products, or indirectly from breakage of larger plastics. The control of MP requires consumers' engagement to refuse products containing microbeads.

Methods

We conducted a survey on 572 university students from Mexico and Spain, two countries where microbeads are not banned yet. More strict laws for plastic control areenforced in Mexico than in Spain.

Results

Controlling for age and education, despite knowing less about MP, Mexicans checked for microbeads on product labels more frequently than Spaniards, and desired to reduce MP consumption more. A stronger correlation between individual awareness and willingness of MP control was found for Mexican than for Spanish students.

Discussion

Perhaps more strict legislation against plastics creates an environment favorable to MP control. Unclear statement of microbeads on labels was the main reason for not checking microbead contents; environmental education and a stricter control of plastics and MP were identified as necessary policy changes in the two countries. Corporation engagement on clearer product labeling is also suggested.

Breakdown and Modification of Microplastic Beads by Aeolian Abrasion

Saltation is an important wind erosion process that can cause the modification and breakdown of particles by aeolian abrasion. It is recognized that microplastic particles can be transported by wind, but the effect of saltation on microplastic properties is unknown. This study examined the impact of simulated saltation alongside quartz grains on the size, shape, and surface properties of spherical microplastic beads. The diameter of the microplastics was reduced by 30-50% over 240-300 h of abrasion with a mass loss of c. 80%. For abrasion periods up to 200 h, the microplastic beads remained spherical with minimal change to overall shape. Over 95% of the fragments of plastic removed from the surface of the microbeads during the abrasion process had a diameter of ≤10 μm. In addition, during the abrasion process, fine particles derived from breakdown of the quartz grains became attached to the surfaces of the microbeads resulting in a reduction in carbon and an increase in silicon detected on the particle surface. The results suggest that microplastics may be mechanically broken down during aeolian saltation and small fragments produced have the potential for long distance transport as well as being within the size range for human respiration.

[Microplastic and dermatological care]

BACKGROUND

Synthetic polymers (plastics) from fossil resources are produced in large quantities and reach the environment as microplastics due to improper disposal and via various entry routes. This may lead to implications on flora, fauna, and humans.

OBJECTIVES

This article aims to provide a concise overview for dermatologists about this complex topic and how it relates to daily medical practice.

MATERIALS AND METHODS

We performed a selective literature review regarding microplastics and sustainability in dermatology in liaison with the collaborative research center on microplastics at the University of Bayreuth.

RESULTS

Primary and secondary microplastics are released into the environment on a large scale and accumulate in aquatic and terrestrial ecosystems. This may lead to their disruption and bears potential to create ecological niches for human pathogenic species. Humans and animals inhale and ingest microplastics, and the health consequences have not been sufficiently investigated. This is mainly because microplastics are not a homogenous group of substances, and potential effects depend on various properties (e.g., type of polymer, size, shape, additivation, surface charge). Dermatological care is resource intensive and contributes in various ways to this matter.

CONCLUSION

Plastics are currently indispensable in many fields. Nevertheless, physicians have the responsibility to prevent negative consequences for the health of society (precautionary principle). Extensive efforts are thus necessary for better sustainability; this includes medical care.

Nano- and microplastics: a comprehensive review on their exposure routes, translocation, and fate in humans

Contamination of the environment with nano-and microplastic particles (NMPs) and its putative adverse effects on organisms, ecosystems, and human health is gaining increasing scientific and public attention. Various studies show that NMPs occur abundantly within the environment, leading to a high likelihood of human exposure to NMPs. Here, different exposure scenarios can occur. The most notable exposure routes of NMPs into the human body are via the airways and gastrointestinal tract (GIT) through inhalation or ingestion, but also via the skin due to the use of personal care products (PCPs) containing NMPs. Once NMPs have entered the human body, it is possible that they are translocated from the exposed organ to other body compartments. In our review article, we combine the current knowledge on the (1) exposure routes of NMPs to humans with the basic understanding of the potential (2) translocation mechanisms into human tissues and, consequently, their (3) fate within the human body. Regarding the (1) exposure routes, we reviewed the current knowledge on the occurrence of NMPs in food, beverages, personal care products and the air (focusing on indoors and workplaces) and found that the studies suggest an abundant presence of MPs within the exposure scenarios. The overall abundance of MPs in exposure matrices relevant to humans highlights the importance of understanding whether NMPs have the potential for tissue translocation. Therefore, we describe the current knowledge on the potential (2) translocation pathways of NMPs from the skin, GIT and respiratory systems to other body compartments. Here, particular attention was paid to how likely NMPs can translocate from the primary exposed organs to secondary organs due to naturally occurring defence mechanisms against tissue translocation. Based on the current understanding, we conclude that a dermal translocation of NMPs is rather unlikely. In contrast, small MPs and NPs can generally translocate from the GIT and respiratory system to other tissues. Thus, we reviewed the existing literature on the (3) fate of NMPs within the human body. Based on the current knowledge of the contamination of human exposure routes and the potential translocation mechanisms, we critically discuss the size of the detected particles reported in the fate studies. In some cases, the particles detected in human tissue samples exceed the size of a particle to overcome biological barriers allowing particle translocation into tissues. Therefore, we emphasize the importance of critically reading and discussing the presented results of NMP in human tissue samples.

Rapid classification of micro-particles using multi-angle dynamic light scatting and machine learning approach

The rapid classification of micro-particles has a vast range of applications in biomedical sciences and technology. In the given study, a prototype has been developed for the rapid detection of particle size using multi-angle dynamic light scattering and a machine learning approach by applying a support vector machine. The device consisted of three major parts: a laser light, an assembly of twelve sensors, and a data acquisition system. The laser light with a wavelength of 660 nm was directed towards the prepared sample. The twelve different photosensors were arranged symmetrically surrounding the testing sample to acquire the scattered light. The position of the photosensor was based on the Mie scattering theory to detect the maximum light scattering. In this study, three different spherical microparticles with sizes of 1, 2, and 4 μm were analyzed for the classification. The real-time light scattering signals were collected from each sample for 30 min. The power spectrum feature was evaluated from the acquired waveforms, and then recursive feature elimination was utilized to filter the features with the highest correlation. The machine learning classifiers were trained using the features with optimum conditions and the classification accuracies were evaluated. The results showed higher classification accuracies of 94.41%, 94.20%, and 96.12% for the particle sizes of 1, 2, and 4 μm, respectively. The given method depicted an overall classification accuracy of 95.38%. The acquired results showed that the developed system can detect microparticles within the range of 1-4 μm, with detection limit of 0.025 mg/ml. Therefore, the current study validated the performance of the device, and the given technique can be further applied in clinical applications for the detection of microbial particles.

The gut microbiota, a key to understanding the health implications of micro(nano)plastics and their biodegradation

The effects of plastic debris on the environment and plant, animal, and human health are a global challenge, with micro(nano)plastics (MNPs) being the main focus. MNPs are found so often in the food chain that they are provoking an increase in human intake. They have been detected in most categories of consumed foods, drinking water, and even human feces. Therefore, oral ingestion becomes the main source of exposure to MNPs, and the gastrointestinal tract, primarily the gut, constantly interacts with these small particles. The consequences of human exposure to MNPs remain unclear. However, current in vivo studies and in vitro gastrointestinal tract models have shown that MNPs of several types and sizes impact gut intestinal bacteria, affecting gut homeostasis. The typical microbiome signature of MNP ingestion is often associated with dysbiosis and loss of resilience, leads to frequent pathogen outbreaks, and local and systemic metabolic disorders. Moreover, the small micro- and nano-plastic particles found in animal tissues with accumulated evidence of microbial degradation of plastics/MNPs by bacteria and insect gut microbiota raise the issue of whether human gut bacteria make key contributions to the bio-transformation of ingested MNPs. Here, we discuss these issues and unveil the complex interplay between MNPs and the human gut microbiome. Therefore, the elucidation of the biological consequences of this interaction on both host and microbiota is undoubtedly challenging. It is expected that microbial biotechnology and microbiome research could help decipher the extent to which gut microorganisms diversify and MNP-determinant species, mechanisms, and enzymatic systems, as well as become important to understand our response to MNP exposure and provide background information to inspire future holistic studies.

Distinct adverse outcomes and lipid profiles of erythrocytes upon single and combined exposure to cadmium and microplastics

The growing accumulation of environmental microplastics (MPs) has become a global concern. MPs are capable to interact with other environmental contaminants leading to altered toxicity. Red blood cells (RBCs), are the target with highest priority for most of toxic xenobiotics after entering blood stream. Whether co-existence of MPs changes the toxicity of cadmium, a typical hemolysis inducer, in RBCs is unknown. We investigated the adverse effects of CdCl₂ and Polystyrene-MPs (PS-MPs) on RBCs in mice. We found that CdCl₂ induced mild microcytic hypochromic anemia while PS-MPs induced polycythemia vera, indicating distinct outcomes between them. Moreover, co-treatment of PS-MPs with CdCl₂ did not change the phenotype of microcytic hypochromic anemia, indicating an antagonistic relationship between CdCl₂ and PS-MPs. However, the lipid profiles were also distinct between single exposure and combined exposure to CdCl₂ and PS-MPs. The significant changed lipids were mainly involved in altering the physiochemical or biological properties of RBCs, including decreased membrane components, disrupted bilayer thickness and intrinsic lipid curvature. These results indicated impaired membrane functions of RBCs. The altered lipid profiles observed in the current study may represent new and previously unrecognized harmful characteristics of cadmium and MPs on erythrocytes at low dose without apparent induction of anemia.

Effect of Silica Microparticles on Interactions in Mono- and Multicomponent Membranes

Advancing our understanding of the mechanism of the interaction between inhaled pollutant microparticles and cell membrane components is useful to study the impact of fine particulate matter on human health. In this paper, we focus on the effect of cholesterol (Chol) molecules on the surface properties of a model membrane in the presence of silica microparticles (MPs). Mixed monolayers containing phospholipid-dipalmitoylphosphatidylcholine (DPPC), Chol and silica particle dispersions (MPs; 0.033% w/w, 0.33% w/w and 0.83% w/w) were formed and studied using the Langmuir monolayer technique complemented by Brewster Angle Microscopy (BAM) images. It was shown that Chol caused a condensation of the DPPC monolayer, which influenced the penetration of MPs and their interactions with the model membrane. The relaxation experiments of the lipid–MP monolayer proved that the presence of Chol molecules in the monolayer led to the formation of lipid and MP complexes. Strong interactions between Chol and MPs contributed to the formation of more stable monolayers. The presented results can be useful to better comprehend the interaction between particulate materials and the lipid components of biomembranes.

Man-made natural and regenerated cellulosic fibres greatly outnumber microplastic fibres in the atmosphere

Atmospheric microplastics have been widely reported in studies around the world. Microfibres are often the dominant morphology found by researchers, although synthetic (i.e., plastic) microfibres are typically just a fraction of the total number of microfibres, with other, non-synthetic, cellulosic microfibres frequently being reported. This study set out to review existing literature to determine the relative proportion of cellulosic and synthetic atmospheric anthropogenic (man-made) microfibres, discuss trends in the microfibre abundances, and outline proposed best-practices for future studies. We conducted a systematic review of the existing literature and identified 33 peer-reviewed articles from Scopus and Google Scholar searches that examined cellulosic microfibres and synthetic microfibres in the atmosphere. Multiple analyses indicate that cellulosic microfibres are considerably more common than synthetic microfibres. FT-IR and Raman spectroscopy data obtained from 24 studies, showed that 57% of microfibres were cellulosic and 23% were synthetic. The remaining were either inorganic, or not determined. In total, 20 studies identified more cellulosic microfibres, compared to 11 studies which identified more synthetic microfibres. The data show that cellulosic microfibres are 2.5 times more abundant between 2016 and 2022, however, the proportion of cellulosic microfibres appear to be decreasing, while synthetic microfibres are increasing. We expect a crossover to happen by 2030, where synthetic microfibres will be dominant in the atmosphere. We propose that future studies on atmospheric anthropogenic microfibres should include information on natural and regenerated cellulosic microfibres, and design studies which are inclusive of cellulosic microfibres during analysis and reporting. This will allow researchers to monitor trends in the composition of atmospheric microfibers and will help address the frequent underestimation of cellulosic microfibre abundance in the atmosphere.

Recent advances on the transport of microplastics/nanoplastics in abiotic and biotic compartments

Plastics enter the environment and break up into microplastics (MPs) and even nanoplastics (NPs) by biotic and abiotic weathering. These small particles are widely distributed in the environmental media and extremely mobile and reactive, easily suspending in the air, infiltrating into the soil, and interacting with biota. Current research on MPs/NPs is either in the abiotic or biotic compartments, with little attention paid to the fact that the biosphere as a whole. To better understand the complex and continuous movement of plastics from biological to planetary scales, this review firstly discusses the transport processes and drivers of microplastics in the macroscopic compartment. We then summarize insightfully the uptake pathways of MPs/NPs by different species in the ecological compartment and analyze the internalization mechanisms of NPs in the organism. Finally, we highlight the bioaccumulation potential, biomagnification effects and trophic transfer of MPs/NPs in the food chain. This work is expected to provide a meaningful theoretical body of knowledge for understanding the biogeochemical cycles of plastics.

Secondary brain injury after polystyrene microplastic-induced intracerebral hemorrhage is associated with inflammation and pyroptosis

Unlike regular environmental pollutants, microplastics cannot dissolve in liquids. Physical contact of microplastic (MPs) with tissue can damage tissue structure, and it is unclear how this physical secondary injury affects brain tissue. Through CTD database analysis, it was determined that cerebral ischemia may be one of the main ways of brain tissue damage caused by MPs, and inflammatory response may play a key role in it. In the present study, PS-MPs (L-PS group:1 mg/L, M - PS group:10 mg/L, H-PS group: 100 mg/L in water) were assessed to brain tissue damage in chicken after six weeks of continuous exposure. Exposure to PS-MPs caused cerebral hemorrhage as well as generation of microthrombi and loss of Purkinje cells. Intracerebral hemorrhage caused a strong infiltration of inflammatory cells and activated the ASC-NLRP3-GSDMD signaling pathway to induce pyroptosis. Disruption of mitochondrial dynamics by PS-MPs exposure disrupts mitochondrial function and activates AMPK signaling. In conclusion, this study explored the mechanism regulation of subsequent brain injury from the perspective of physical injury (cerebral hemorrhage) of PS-MPs. To provide a reference for elucidating the neurotoxicity induced by microplastic exposure.

In-depth characterization revealed polymer type and chemical content specific effects of microplastic on Dreissena bugensis

In aquatic ecosystems, filter feeders like mussels are particularly vulnerable to microplastics (MP). However, little is known about how the polymer type and the associated properties (like additives or remaining monomers) of MP impact organisms, as the predominant type of MP used for effect studies on the organismic level are micron grade polystyrene spheres, without considering their chemical composition. Therefore, we exposed the freshwater mussel Dreissena bugensis (D. bugensis) to in-depth characterized fragments in the same concentration and size range (20-120 µm): recycled polyethylene terephthalate from drinking bottles, polyamide, polystyrene, polylactic acid, and mussel shell fragments as natural particle control. Real-time valvometry, used to study behavioral responses via the movement of the mussels' valves, showed that mussels cannot distinguish between natural and MP particles, and therefore do not cease their filtration, as when exposed to dissolved pollutants. This unintentional ingestion led to polymer type-dependent adverse effects (activity of antioxidant enzymes and proteomic alterations), related to chemicals and residual monomers found in MP. Overall, recycled PET elicited the strongest negative effects, likely caused by anthranilamide, anthranilonitrile and butylated hydroxytoluene, contained in the fragments, which are toxic to aquatic organisms. As PET is among the most abundant MP in the environment, sublethal effects may gradually manifest at the population level, leading to irreversible ecosystem changes.

Coronas of micro/nano plastics: a key determinant in their risk assessments

As an emerging pollutant in the life cycle of plastic products, micro/nanoplastics (M/NPs) are increasingly being released into the natural environment. Substantial concerns have been raised regarding the environmental and health impacts of M/NPs. Although diverse M/NPs have been detected in natural environment, most of them display two similar features, i.e.,high surface area and strong binding affinity, which enable extensive interactions between M/NPs and surrounding substances. This results in the formation of coronas, including eco-coronas and bio-coronas, on the plastic surface in different media. In real exposure scenarios, corona formation on M/NPs is inevitable and often displays variable and complex structures. The surface coronas have been found to impact the transportation, uptake, distribution, biotransformation and toxicity of particulates. Different from conventional toxins, packages on M/NPs rather than bare particles are more dangerous. We, therefore, recommend seriously consideration of the role of surface coronas in safety assessments. This review summarizes recent progress on the eco-coronas and bio-coronas of M/NPs, and further discusses the analytical methods to interpret corona structures, highlights the impacts of the corona on toxicity and provides future perspectives.

Monosodium urate crystals with controlled shape and aspect ratio for elucidating the pathological progress of acute gout

Gout is a self-limiting inflammatory arthritis mediated by the precipitation of monosodium urate (MSU) crystals that further activate the NLRP3 inflammasome and initiate a cascade of inflammatory events. However, the key physicochemical properties of MSU crystals that determine the acute phase of gout have not been fully identified. In this study, a library of engineered MSU crystals with well-controlled size and shape is designed to explore their proinflammatory potentials in mediating the pathological progress of gout. It is demonstrated that medium-sized long aspect ratio MSU crystals induce more prominent IL-1β production in vitro due to enhanced cellular uptake and the production of mitochondrial reactive oxygen species (mtROS). The characteristics of MSU crystals are also correlated with their inflammatory potentials in both acute peritonitis and arthritis models. Furthermore, 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) is demonstrated to inhibit MSU-induced oxidative burst by removing plasma membrane cholesterol. As a result, it attenuates the inflammatory responses both in vitro and in vivo. Additionally, antioxidant N-acetylcysteine (NAC) is shown to alleviate acute gouty symptom by suppressing oxidative stress. This study identifies the key physicochemical properties of MSU crystals that mediate the pathogenesis of gout, which sheds light on novel design strategies for the intervention of gout.

Chronic toxic effects of polystyrene microplastics on reproductive parameters of male rats

Microplastics have become a significant environmental concern. However, information on toxicity of microplastics in terrestrial organisms is limited. In this study, the chronic toxic effects of polystyrene microplastics (PS-MPs) on the reproductive system and serum antioxidants of male albino Wistar rats fed for 90 days with standard rat feed containing 1–10% granules of crushed polystyrene disposable plates were evaluated. Significant reductions in volume, motility, epididymal sperm count and serum testosterone level were observed. Histological examination of testicular architecture showed distorted testes with vacuolated seminiferous tubules at the highest percentage, together with increased catalase and decreased superoxide dismutase activities. This study showed that ingestion of PS-MPs caused reproductive dysfunction in male rats and contributes to understanding the potential toxicity of microplastics in terrestrial animals.

Copper cable doped with tin oxide and its application to photodegrade natural organic matters

Natural organic matters are of particular importance in drinking water treatment due to their reaction with chlorine, and formation of disinfection byproducts that cause cancer in humans. Photocatalysis can remove natural organic matters from water but usually powdery photocatalysts are used which should be separated from water by filtration due to their toxic effects. In this work, a piece of copper cable used in electric industries was doped with tin oxide and applied as a photocatalyst to remove natural organic matters, humic acid and humate liquid fertilizer, from water. Tin (II) chloride was used as precursor, and deposited on the copper cable by dip coating method. Then the coated cable was calcinated at 300 °C. The prepared SnO₂/CuO/Cu photocatalyst was characterized by ICP, SEM, DRS, XRD, and ASAP techniques. The results of XRD confirmed the existence of copper oxide, and tin oxides. DRS showed that doping with tin oxide caused the photocatalytic property to improve, and the catalyst was active under irradiation of UV-Vis light. Effects of humic acid concentration, photocatalyst length, and time were studied. The kinetic of humic acid photodegradation by the SnO₂/CuO/Cu photocatalyst was investigated, which obeyed the first order model. The photocatalyst regeneration and reuse were investigated in five cycles, and the results indicated that photocatalytic activity was remained nearly constant. The cable form SnO₂/CuO/Cu photocatalyst with the main advantage of easy separation from water without the need to filtration, has excellent photocatalytic activity.

Polyethylene scaffold net and synthetic grass fragmentation: a source of microplastics in the atmosphere?

Microplastics (MPs) implications in the atmosphere are of current global concern. Currently, there is a growing interest regarding source appointment, fate, level of toxicity, and exposure intensity of ambient air MPs. Recent data suggest that polyethylene (PE) dominates ambient MPs in China's megacities. Albeit understanding of PE sources is limited and restricted to typical sources polluting terrestrial and marine environments. However, the air is a distinct environmental component and may have some separate pollution sources as well as the relative contribution of different sources could also contrast in different environments. Urbanization and fast construction activity resulting from increased economic growth in these places might be a potential source of ambient PE. Recently, the use of scaffold netting on construction sites and synthetic grass as land covering sheets has been on the rise. Generally, these PE items are often inferior and composed of recycled material, making them more prone to degradation. Also, because these items were continually exposed to open air, there is a considerable risk of fragmentation and atmospheric mixing. Therefore, unchecked and excessive usage of these materials can be risky. Here, PE's physical and chemical characteristics, transport and health risks in urban air are discussed here.

Methodologies to Assess the Biodegradability of Bio-Based Polymers—Current Knowledge and Existing Gaps

Our society lives in a time of transition where traditional petroleum-based polymers/plastics are being replaced by more sustainable alternative materials. To consider these bioproducts as more viable options than the actual ones, it is demanded to ensure that they are fully biodegradable or compostable and that there is no release of hazardous compounds to the environment with their degradation. It is then essential to adapt the legislation to support novel specific guidelines to test the biodegradability of each biopolymer in varied environments, and consequently, establish consistent data to design a coherent labeling system. This review work aims to point out the current standards that can serve as a basis for the characterization of biopolymers’ biodegradation profile in different environments (soil, compost, and aquatic systems) and identify other laboratory methodologies that have been adopted for the same purpose. With the information gathered in this work, it was possible to identify remaining gaps in existing national and international standards to help establish new validation criteria to be introduced in future research and policies related to bioplastics to boost the sustainable progress of this rising industry.