Radical and non-radical cooperative degradation in metal-free electro-Fenton based on nitrogen self-doped biochar

Constructing Stable N-Doped Iron-Based Porous Carbon Nanocatalyst for Antibiotic Degradation and Bactericidal Detoxification

N-doped iron-based carbon is a promising catalyst to achieve peroxydisulfate (PDS) activation, but constructing efficient and stable N-doped iron-based carbon catalysts with uniformly distributed and firmly anchored nitrogen and iron sources remains challenging. Herein, we developed a stable N-doped magnetic porous carbon (NMPC) catalyst through self-polymerization and high-temperature pyrolysis of polydopamine and Fe3+ coordination complexes and explored it for PDS activation in antibiotic (tetracycline (TC) and ciprofloxacin) degradation and bactericidal detoxification. The NMPC/PDS system performed both radical and nonradical catalytic pathways for effective PDS activation, exhibiting 99.8% removal of TC. Thanks to the strong coordination of polydopamine with Fe3+, the resulting NMPC could firmly confine iron species in the porous N-carbonaceous matrices and efficiently prevent severe iron leaching, demonstrating good recyclability. It could maintain a removal rate as high as 92.4% after 5 cycles. After cycling, the iron leaching of the NMPC catalyst is only 0.026 mg/L, which is much lower than the WHO guideline value limits for drinking water of 0.3 mg/L. Moreover, the NMPC catalyst exhibits excellent stability and compatibility with various water conditions, including pH variations (3-9), coexisting substances, and different water sources. In addition, this NMPC/PDS system exhibits an excellent disinfection of both Escherichia coli and Staphylococcus aureus, with a high disinfection ratio of more than 99.9%. Toxic intermediate prediction and cell toxicity experiments further prove that the toxicity of the TC wastewater is significantly reduced after the treatment with the NMPC/PDS system.

Increasing nitrogen source by chitosan coupled with nZVI-jelly fig peel biochar to improve O2 reduction to H2O2 and its electrochemical performance

The electrocatalytic process of two-electron oxygen reduction reaction (ORR) presents a promising strategy for synthesizing H₂O₂. Nitrogen-doped carbon materials have attracted considerable interest in their performance as highly active and selective electrocatalysts in this reaction. This study was conducted to produce biochar from the high‑nitrogen content of jelly fig (Ficus pumila var. awkeotsang) peel by pyrolysis, and the biochar was compounded with zero-valent iron as the cathodic catalyst for an electrocatalytic system. Functional groups such as OH, CO, and NH were abundant on the biochar surface produced by heating the jelly fig peel at 600 °C. A 2.6 % N element can enhance the conductivity of the catalyst, while other functional groups can increase the ORR activity on the cathode surface. The hydrothermal synthesis of chitosan and jelly fig peel produced the catalyst, heating the components in a pressurized vessel to facilitate the formation of the catalyst. The catalyst exhibited a high content of oxygen atoms (60.5 %) on the cathode surface, improving the low-oxygen atoms after the high-temperature pyrolysis of biochar. The cathode doped with zero-valent iron compounded with jelly fig peel biochar achieved a high H2O2 yield of 517.5 mg/L, a current efficiency of 81.6 %, and favorable stability.

Effect of persulfate dosage on organic degradation using N-doped biochar: Reaction pathway and environmental implications

Persulfate-based advanced oxidation processes (PS-AOPs) catalyzed by carbon-based catalysts are promising for removing organic pollutants via radical/non-radical pathways. However, the activation efficiency of peroxymonosulfate (PMS) or peroxydisulfate (PDS) usage and the reaction mechanism remain insufficiently understood. In this study, the effects of PMS/PDS dosage on the degradation of bisphenol A (BPA, 10 mg/L) were evaluated using N-doped biochar (N-BC, 0.2 g/L) assisted PS-AOPs. The reaction pathways were comprehensively investigated through a combination of characterization techniques and molecular simulations. With low PS dosages (0.05 and 0.1 mM), the degradation rate constants (k obs $$ {k}_{obs} $$ ) were higher in N-BC/PDS (0.04 and 0.07 min-1) compared to N-BC/PMS (0.02 and 0.04 min-1), likely due to higher PDS utilization, which enhanced the contribution of the non-radical pathway. Interestingly, with higher PS dosages (0.5 and 1.5 mM), thek obs $$ {k}_{obs} $$ values were 0.16 min-1 and 0.18 min-1 in N-BC/PMS, respectively, significantly exceeding those determined in N-BC/PDS (0.11 and 0.11 min-1). This result stemmed from the greater adsorption capacity of N-BC for PMS compared to PDS, leading to increased formation of 1O2. The contribution of non-radical pathways for both PMS and PDS increased with higher PS dosage. The results highlighted that BPA degradation improved significantly with the increase in PMS dosage; meanwhile, BPA degradation was insensitive to PDS dosage. The optimal PMS dosage for BPA degradation was found to be 1.5 mM and 0.1 mM for PDS. This study offered valuable insights for optimizing PS-AOPs in environmental remediation, helping to guide the selection of appropriate oxidants and dosages for maximizing pollutant removal. PRACTITIONER POINTS: Effect of PMS/PDS dosage on BPA degradation by N-doped biochar was revealed. Contribution of dominated non-radical pathway increased as PMS/PDS dosage increased. The greater PDS utilization and non-radical pathway resulted in the higherk obs $$ {k}_{obs} $$ at low dosage. N-BC adsorbed more PMS than PDS, leading to an increase ink obs $$ {k}_{obs} $$ at high dosage.

Upcycling Waste Biomass to Biochar: Feedstocks, Catalytic Mechanisms, and Applications in Advanced Oxidation for Wastewater Decontamination

Advanced oxidation technology plays an important role in wastewater treatment due to active substances with high redox potential. Biochar is a versatile and functional biomass material. It can be used for resource management of various waste biomasses. In addition, carbonaceous materials are commonly used to enhance the synergistic mechanisms of advanced oxidation processes, because of their good electrical conductivity and metal-free leaching. Biochar produced from waste biomass through pyrolysis has catalytic potential, is cost-effective, and is environmentally friendly. It is commonly used to activate hydrogen peroxide, persulfate, ozone, photocatalysis, and other systems for degrading organic pollutants in water. This review provides a summary of the feedstocks, pyrolysis conditions, and modification methods used in biochar production. It also described the effects of these factors on the yield, structure, and active sites of the biochar. The review summarized the mechanisms of various catalytic systems and their applications in wastewater decontamination, as well as their potential for practical application. Eventually, the limitations of this current technique and the outlook for future research were noted.

Application of Biochar-Based Materials for Effective Pollutant Removal in Wastewater Treatment

With the growth of the global population and the acceleration of industrialization, the problem of water pollution has become increasingly serious, posing a major threat to the ecosystem and human health. Traditional water treatment technologies make it difficult to cope with complex pollution, so the scientific community is actively exploring new and efficient treatment methods. Biochar (BC), as a low-cost, green carbon-based material, exhibits good adsorption and catalytic properties in water treatment due to its porous structure and abundant active functional groups. However, BC's pure adsorption or catalytic capacity is limited, and researchers have dramatically enhanced its performance through modification means, such as loading metals or heteroatoms. In this paper, we systematically review the recent applications of BC and its modified materials for water treatment in adsorption, Fenton-like, electrocatalytic, photocatalytic, and sonocatalytic systems, and discuss their adsorption/catalytic mechanisms. However, most of the research in this field is at the laboratory simulation stage and still needs much improvement before it can be applied in large-scale wastewater treatment. This review improves the understanding of the pollutant adsorption/catalytic properties and mechanisms of BC-based materials, analyzes the limitations of the current studies, and investigates future directions.

Iron metal-organic framework nanofiber membrane for the integration of electro-Fenton and effective continuous treatment of pharmaceuticals in water

In this study, an iron metal-organic framework (Fe-MOF) was synthesized and immobilized by electrospinning technique with the objective of obtaining a membrane composed of nanofibers of this material (Fe-MOF nanofiber membrane). The characterization performed by XRD, TEM, SEM, EDS mapping and FTIR confirmed the correct synthesis of Fe-MOF as well as its correct retention in the elaborated membranes. The usefulness and effectiveness of the Fe-MOF nanofiber membrane as a catalyst for the electro-Fenton process was evaluated by performing sulfamethoxazole degradation tests. Different parameters such as the effect of intensity (25 and 100 mA), the effect of the drug initial concentration (10-50 mg/L) and the reusability of membranes were studied. Then, the degradation of a drug mixture formed by sulfamethoxazole and antipyrine was evaluated, reaching a degradation of 92.10 % and 87.43 % respectively for each drug in 4 h at 25 mA. In addition, the identification of reactive oxygen species was ascertained by scavenger assays. The study of degradation products was also carried out and their toxicity was predicted by ECOSAR program, concluding that the environmental toxicity would disappear with mineralization. Finally, given the good results obtained in batch tests, the behavior of the process was studied in a system that works continuously, achieving a stable degradation of 83.10 % in the case of treatment with a mixture of drugs. This confirmed the stability of the Fe-MOF nanofiber membrane, as well as, its catalytic activity, making it suitable for long-term treatments.

In situ N-doping engineered biochar catalysts for oxidation degradation of sulfadiazine via nonradical pathways: Singlet oxygen and electron transfer

Understanding the structure of non-metallic heteroatom-doped carbon catalysts and the subsequent degradation of new pollutants is crucial for designing more efficient carbon catalysts. Environmentally friendly in situ N-doped biochar catalysts were prepared for peroxymonosulfate (PMS) activation and sulfadiazine (SDZ) degradation. The acid washing process and calcination temperature of catalyst increased π-π* shake up, graphitic N percentage, specific surface area and defects, promoting the transformation of pollutant degradation mechanism from radical pathway to non-radical pathway. 100 % of the SDZ with the initial concentration of 10 mg/L was quickly degraded within 60 min using 0.2 g/L catalysts and 0.5 mM PMS. Excellent catalytic performance was attributed to singlet oxygen and electron transfer-dominated non-radical pathways. The four potential degradation pathways of SDZ were proposed, and toxicity predication indicated that overall biotoxicity of the intermediates during SDZ degradation was decreased. This research deepens our understanding of the mechanisms of non-radical pathways and guides the synthesis of carbon-based catalysts.

Coupling Electro-Fenton and Electrocoagulation of Aluminum-Air Batteries for Enhanced Tetracycline Degradation: Improving Hydrogen Peroxide and Power Generation

Electro-Fenton (EF) technology has shown great potential in environmental remediation. However, developing efficient heterogeneous EF catalysts and understanding the relevant reaction mechanisms for pollutant degradation remain challenging. We propose a new system that combines aluminum-air battery electrocoagulation (EC) with EF. The system utilizes dual electron reduction of O2 to generate H2O2 in situ on the air cathodes of aluminum-air batteries and the formation of primary cells to produce electricity. Tetracycline (TC) is degraded by ·OH produced by the Fenton reaction. Under optimal conditions, the system exhibits excellent TC degradation efficiency and higher H2O2 production. The TC removal rate by the reaction system using a graphite cathode reached nearly 100% within 4 h, whereas the H2O2 yield reached 127.07 mg/L within 24 h. The experimental results show that the novel EF and EC composite system of aluminum-air batteries, through the electroflocculation mechanism and ·OH and EF reactions, with EC as the main factor, generates multiple •OH radicals that interact to efficiently remove TC. This work provides novel and important insights into EF technology, as well as new strategies for TC removal.

Optimization Strategy for Formaldehyde Removal by Carbon Cathode Electro-Fenton: Enhancement of Formaldehyde and Oxygen Co-adsorption by Rational Nitrogen Doping Types

This study investigates the effect of N-doped coal-based activated carbon cathode on formaldehyde-oxygen coadsorption. Further investigation investigates the effect of formaldehyde-oxygen coadsorption on H2O2 generation and formaldehyde removal in an electro-Fenton system. Nitrogen doping enhances formaldehyde and oxygen coadsorption by modulating competitive adsorption. Density Functional Theory (DFT) calculations confirm pyrrole nitrogen favors formaldehyde, and graphite nitrogen favors oxygen adsorption. N-doped activated carbon adsorbs 0.36 mg of formaldehyde and 0.1 mg of oxygen in 120 min and removes 82.43% of formaldehyde after electro-Fenton treatment. N-doped activated carbon enhances the synergistic adsorption of formaldehyde and oxygen. In the synergistic adsorption process, the amount of formaldehyde adsorbed is greater than the amount of oxygen adsorbed. This improves the removal efficiency of formaldehyde by electro-Fenton technology. It provides a new method for electro-Fenton removal of organic pollutants.

Biochar-based functional materials for the abatement of emerging pollutants from aquatic matrices

Biochar has emerged as a versatile and efficient multi-functional material, serving as both an adsorbent and catalyst in removing emerging pollutants (EPs) from aquatic matrices. However, pristine biochar's catalytic and adsorption capabilities are hindered by its poor surface functionality and small pore size. Addressing these limitations involves the development of functionalized biochar, a strategic approach aimed at enhancing its physicochemical properties and improving adsorption and catalytic efficiencies. Despite a growing interest in this field, there is a notable gap in existing literature, with no review explicitly concentrating on the efficacy of biochar-based functional materials (BCFMs) for removing EPs in aquatic environments. This comprehensive review aims to fill this void by delving into the engineering considerations essential for designing BCFMs with enhanced physiochemical properties. The focus extends to understanding the treatment efficiency of EPs through mechanisms such as adsorption or catalytic degradation. The review systematically outlines the underlying mechanisms involved in the adsorption and catalytic degradation of EPs by BCFMs. By shedding light on the prospects of BCFMs as a promising multi-functional material, the review underscores the imperative for sustained research efforts. It emphasizes the need for continued exploration into the practical implications of BCFMs, especially under environmentally relevant pollutant concentrations. This holistic approach seeks to contribute to advancing knowledge and applying biochar-based solutions in addressing the challenges posed by emerging pollutants in aquatic ecosystems.

Defective nitrogen doped carbon material derived from nano-ZIF-8 for enhanced in-situ H2O2 generation and tetracycline hydrochloride degradation in electro-Fenton system

Tetracycline hydrochloride (TC) accumulates in large quantities in the water environment, causing a serious threat to human health and ecological environment safety. This research focused on developing cost-effective catalysts with high 2e- selectivity for electro-Fenton (EF) technology, a green pollution treatment method. Defective nitrogen-doped porous carbon (d-NPC) was prepared using the metal-organic framework as the precursor to achieve in-situ H2O2 production and self-decomposition into high activity ·OH for degradation of TC combined with Co2+/Co3+. The d-NPC produced 172.1 mg L-1 H2O2 within 120 min, and could degrade 96.4% of TC in EF system. The self-doped defects and graphite-nitrogen in d-NPC improved the oxygen reduction performance and increased the H2O2 yield, while pyridine nitrogen could catalyze H2O2 to generate ·OH. The possible pathway of TC degradation was also proposed. In this study, defective carbon materials were prepared by ball milling, which provided a new strategy for efficient in-situ H2O2 production and the degradation of pollutants.

Fenton-Like Reaction: Recent Advances and New Trends

The Fenton reaction refers to the reaction in which ferrous ions (Fe2+) produce hydroxyl radicals and other reactive oxidizing substances by decomposing hydrogen peroxide (H2O2). This paper reviews the mechanism, application system, and materials employed in the Fenton reaction including conventional homogeneous and non-homogeneous Fenton reactions as well as photo-, electrically-, ultrasonically-, and piezoelectrically-triggered Fenton reactions, and summarizes the applications in the degradation of soil oil pollutions, landfill leachate, textile wastewater, and antibiotics from a practical point of view. The mineralization paths of typical pollutant are elucidated with relevant case studies. The paper concludes with a summary and outlook of the further development of Fenton-like reactions.

3D electro-Fenton augmented with iron-biochar particle electrodes derived from waste iron bottle caps and sugarcane bagasse for the remediation of sodium dodecyl sulphate

The present work demonstrates a novel strategy of synthesizing iron-biochar (Fe@BCSB) composite made with the waste iron bottle cap and sugar cane bagasse for implementation in the three-dimensional electro-Fenton (3DEF) process. The catalytic ability of the Fe@BCSB composite was explored to remediate the sodium dodecyl sulphate (SDS) surfactant from wastewater at neutral pH. At the optimum operating condition of Fe@BCSB dose of 1.0 g L-1, current density of 4.66 mA cm-2, and Na2SO4 dose of 50 mM, nearly 92.7 ± 3.1% of 20 mg L-1 of SDS abatement was attained during 120 min of electrolysis time. Moreover, the Fe@BCSB showed significant recyclability up to six cycles. Besides, other organics were successfully treated with more than 85% abatement efficiency in the proposed Fe@BCSB-supported 3DEF process. The total operating cost obtained during SDS treatment was around 0.31 US$ m-3 of wastewater. The phytotoxicity test revealed the positive impact of the 3DEF-treated effluent on the germination of the Vigna radiata. The electron paramagnetic resonance conveyed •OH as the prevailing reactive species for the oxidation of SDS in the 3DEF process. Further, about 81.3 ± 3.8% of SDS and 53.7 ± 4.1% of mineralization efficacy were acquired from the real institutional sewage.

Ferrocene crosslinked and functionalized chitosan microspheres towards bio-based Fenton-like system for the removal of organic pollutants

Dye-containing wastewater treatment has been a major long-term global challenge. For this purpose, a novel bio-based microspheres (CS-FC) with high specific surface area (63.24 m2·g-1) and nano-channels (17.95 nm) was prepared using chitosan as the framework and ferrocene as a crosslinking active group. CS-FC not only has the ability to rapidly enrich methyl orange (MO) through hydrogen-bonding and electrostatic attraction, but also almost completely degrades it in the presence of H2O2/K2S2O8 through a synergistic radical/non-radical mechanism under the activating effect of ferrocene. Without H2O2/K2S2O8, the maximum MO adsorption capacity of CS-FC is in the range 871-1050 mg·g-1, and conforms to a Langmuir isothermal model with pseudo-second-order kinetics. In the presence of H2O2/K2S2O8, the removal of MO dramatically increased from 32 % to nearly 100 % after incubation for 60 min, due to the simultaneous formation of highly reactive 1O2 and ·OH. The significant contribution from 1O2 endowed CS-FC/H2O2/K2S2O8 with high universality for degrading various organic pollutants (including azo dyes and antibiotics), a wide pH window (2-8), and low sensitivity to co-existing ions. Such cost-effective, recyclable porous bio-based microspheres are suitable for heterogeneous Fenton-like catalysis in organic wastewater treatment that rely on synergistic radical/non-radical reaction pathways.

Synthesis and DFT calculation of microbe-supported Pd nanocomposites with oxidase-like activity for sensitive detection of nitrite

Nanozymes have emerged as the forefront of research in analytical sensing due to their promising applications. In this study, we utilized polyethyleneimine (PEI)-modified Pichia pastoris residue to synthesize microbial-based palladium nanocomposites (Pd/MMR) through simple in-situ reduction methods. The dispersed active sites of Pd nanoparticles with a size of 2.12 ± 0.49 nm that were supported by microbial biomass provided excellent oxidative enzyme-mimicking activity to Pd/MMR. The catalytic mechanism of Pd/MMR involved the combined action of 1O2, ·OH, and ·O2-, and possible reaction pathways and corresponding energy barriers were also revealed using DFT calculations. We also established a quantitative detection platform for nitrite using Pd/MMR. The platform could detect nitrite at concentrations of 10-300 μM with a detection limit of 0.27 μM, and was successfully applied to detect nitrite in real samples. These findings serve as a reference for the synthesis and application of metal nanocomposites using microorganisms.

Amino-grafted Biochar as a Novel Photocatalyst for degradation of high concentration dye

Photocatalytic degradation of organic pollution by biochar was a sustainable strategy for waste water remediation, nevertheless, it still suffers drawbacks like low efficiency due to the poor photocatalytic properties of pristine biochar. Herein, amino groups were grafted on the edge sites/defects of biochar by Friedel-Crafts acylation to enhance the degradation of high concentration dye solutions. The results suggested that the amino groups played an important role in imparting photocatalytic properties to biochar. Owing to the strong Lewis basicity and electron-donating ability of amino groups, their interaction with oxygen-containing functional groups/aromatic structures in biochar was improved, which enhanced the electron exchange ability of biochar under visible light irradiation, resulting in excellent degradation performances of high concentration RhB (∼10 times faster than ungrafted biochar). In this work, amino-grafted garlic peel biochar delivered a new idea for the future direction of biochar-based photocatalysis in wastewater remediation.

Contamination distribution and non-biological removal pathways of typical tetracycline antibiotics in the environment: A review

While the occurrence and removal technologies of tetracyclines in the environment have been reported, a comprehensive systematic summary and analysis remain limited, especially for new generations compounds such as doxycycline. In this review, the latest information regarding the distribution of various tetracyclines in different countries over the past seven years (2017-2023) reveals a notable absence of research reports in North America and Oceania. With China as the representative country, the investigation indicates that the maximum concentrations of TCs exceed 5 µg/L. The maximum concentration of tetracyclines in feces (26.22 µg/L) can reach one order of magnitude higher than that in other media. Furthermore, advanced oxidation technologies, such as Fenton processes, electrochemical oxidation, photolysis, ozonation, etc., were also examined, and the median degradation rate achieved 91.9-97.67%. Reactions such as methylation, demethylation, hydroxylation, dehydration, ring cleavage, and oxidation were observed during degradation. The most common intermediate product was identified as m/z = 461 (C22H25N2O9). This review indicates that future efforts should emphasize understanding the occurrence and fate of new-generation tetracyclines in the environment.

Recycling waste iron-rich algal flocs as cost-effective biochar activator for heterogeneous Fenton-like reaction towards tetracycline degradation: Important role of iron species and moderately defective structures

Harvesting aquatic harmful algal blooms (HABs) and reusing them is a promising way for antibiotic degradation. Herein, a novel iron-rich biochar (Fe-ABC), derived from algal biomass harvested by magnetic coagulation, was successfully designed and fabricated as activator for heterogeneous Fenton-like reaction. The modification methods and pyrolysis temperatures (400-800 °C) were optimized to enhance the formation of rich iron species and moderately defective structure, yielding Fe-ABC-600 with enhanced electron transfer and H2O2 activation capability. Thus, Fe-ABC-600 exhibited superior removal efficiency (95.33%) on tetracycline (TC), where the presence of multiple iron species (Fe3+, Fe2+ and Fe4+) and moderately defective structure accelerating the Fenton-like oxidation. The concentration of leaching Fe after each reaction was all below 0.74 mg/L in five cycles, ensuring the sustained degradation. And •OH was proved to be the major radical contributing to the degradation of TC, as well as the direct electron transfer mechanism together, in which the CO acted as electron regulator and electron donor. Fe-ABC as a cost-effective catalyst has notable application potentials in TC removal from wastewater owing to its remarkable advantages of high resource utilization, enhanced catalytic property, high ecological safe, notable TC degradation efficiency, low cost and environmental-friendliness.

In-situ hydrogen peroxide formation and persulfate activation over banana peel-derived biochar cathode for electrochemical water treatment in a flow reactor

Electrochemical advanced oxidation processes (EAOPs) are effective for the removal of organic contaminants from groundwater. The choice of an affordable cathode material that can generate reactive oxygen species (ROS) such as hydrogen peroxide (H2O2) and hydroxyl radicals (•OH) will increase practicality and cost effectiveness of EAOPs. Carbon enriched biochar (BC), which is derived from pyrolysis of biomass, has emerged as an inexpensive and environmentally-friendly electrocatalyst for removing contaminants from groundwater. In this study, a banana peel-derived biochar (BP-BC) cathode packed in a stainless steel (SS) mesh was used in a continuous flow reactor to degrade the ibuprofen (IBP), as a model contaminant. The BP-BC cathodes generate H2O2 via a 2-electron oxygen reduction reaction, initiate the H2O2 decomposition to generate •OH, adsorb IBP from contaminated water, and oxidize IBP by formed •OH. Various reaction parameters such as pyrolysis temperature and time, BP mass, current, and flow rate, were optimized to maximize IBP removal. Initial experiments showed that H2O2 generation was limited (∼3.4 mg mL-1), resulting in only ∼ 40% IBP degradation, due to insufficient surface functionalities on the BP-BC surface. The addition of persulfate (PS) into the continuous flow system significantly improves the IBP removal efficiency via PS activation. The in-situ H2O2 formation and PS activation over BP-BC cathode results in concurrent generation of •OH and sulfate anion radicals (SO4•-, a reactive oxidant), respectively, which collectively achieve ∼ 100% IBP degradation. Further experiments with methanol and tertiary butanol as potential scavengers for •OH and SO4•- confirm their combined role in complete IBP degradation.

Distribution, migration, and removal of N-containing products during polyurethane pyrolysis: A review

Due to the wide applications of polyurethane (PU), production is constantly increasing, accounting for 8% of produced plastics. PU has been regarded as the 6th most used polymer in the world. Improper disposal of waste PU will result in serious environmental consequences. The pyrolysis of polymers is one of the most commonly used disposal methods, but PU pyrolysis easily produces toxic and harmful nitrogen-containing substances due to its high nitrogen content. This paper reviews the decomposition pathways, kinetic characteristics, and migration of N-element by product distribution during PU pyrolysis. PU ester bonds break to produce isocyanates and alcohols or decarboxylate to produce primary amines, which are then further decomposed to MDI, MAI, and MDA. The nitrogenous products, including NH3, HCN, and benzene derivatives, are released by the breakage of C-C and C-N bonds. The N-element migration mechanism is concluded. Meanwhile, this paper reviews the removal of gaseous pollution from PU pyrolysis and discusses the removal mechanism in depth. Among the catalysts for pollutant removal, CaO has the most superior catalytic performance and can convert fuel-N to N2 by adsorption and dehydrogenation reactions. At the end of the review, new challenges for the utilization and high-quality recycling of PU are presented.

Cu-Based Catalysts Supported on H3PO4-Activated Coffee Biochar for Selective Reduction of Nitroaromatics

Selective reduction of nitroaromatics to the corresponding aromatic amines is extremely an attractive chemical process for both fundamental research and potential commercial applications. Herewith, we report that a highly dispersed Cu catalyst supported on H₃PO₄-activated coffee biochar and the resulting Cu/PBCR-600 catalyst show complete conversion of the nitroaromatics and >97.0% selectivity for the corresponding aromatic amines. The TOF of catalyzing the reduction of nitroaromatics (1.55-460.74 min^-1) is approximately 2 to 15 times higher than those of previously reported non-noble and even noble metal catalysts. Additionally, Cu/PBCR-600 also shows high stability in catalytic recycles. Furthermore, it exhibits long-term catalytic stability (660 min) for practical application in a continuous-flow reactor. The characterizations and activity tests reveal that Cu⁰ existing in Cu/PBCR-600 acts as an active site in nitroaromatics reduction. Also, the further characterization by FTIR and UV-vis demonstrates that N, P co-doped coffee biochar could selectively adsorb and activate the nitro group of nitroaromatics.

Efficient degradation of tetracycline residues in pharmaceutical wastewater by Ni/Fe bimetallic atomic cluster composite catalysts with enhanced electron transfer pathway

Metal cluster catalysts have large atomic load, interaction between atomic sites, and wide application of catalysis. In this study, a Ni/Fe bimetallic cluster material was prepared by a simple hydrothermal method and used as an efficient catalyst to activate the degradation system of peroxymonosulfate (PMS), which showed nearly 100% tetracycline (TC) degradation performance over a wide pH range (pH = 3-11). The results of electron paramagnetic resonance test, quenching experiment and density functional theory (DFT) calculation show that the non-free radical pathway electron transfer efficiency of the catalytic system is effectively improved, and a large number of PMS are captured and activated by high density Ni atomic clusters in Ni/Fe bimetallic clusters. The degradation intermediates identified by LC/MS showed that TC was efficiently degraded into small molecules. In addition, the Ni/Fe bimetallic cluster/PMS system has excellent efficiency for degrading various organic pollutants and practical pharmaceutical wastewater. This work opens up a new way for metal atom cluster catalysts to efficiently catalyze the degradation of organic pollutants in PMS systems.

Oxidation of tetracycline hydrochloride with a photoenhanced MIL-101(Fe)/g-C3N4/PMS system: Synergetic effects and radical/nonradical pathways

MIL-101(Fe)-based catalysts have been widely used for degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Hence, a facile calcination and hydrothermal method was used in this study to prepare a MIL-101(Fe)/g-C₃N₄ composite catalyst with high activity and high stability for PMS activation to degrade tetracycline hydrochloride (TC) under visible-light irradiation. We clearly elucidated the mechanism involved in the MIL-101(Fe)/g-C₃N₄ photo Fenton-catalyzed PMS activation process by separating the PMS activation and pollutant oxidation processes. The synergetic effects of MIL-101(Fe) and g-C₃N₄ involved MIL-101(Fe) acting as an electron shuttle mediating electron transfer from the organic substrate to PMS, accompanied by redox cycling of the surface Fe(II)/Fe(III). Multiple experimental results indicated that PMS was bound to the surface of MIL-101(Fe)/g-C₃N₄ during visible irradiation and generation of sulfate radicals (SO₄^•-), hydroxyl radicals (•OH) and superoxide anion free radicals (•O₂^-) for the radical pathway and singlet oxygen (¹O₂) and holes (h⁺) for the nonradical pathway. The major degradation pathways for TC can be described as demethylation, deamination, deamidation and carbonylation. This work provides valuable information and advances the fundamental understanding needed for design and syntheses of metal-free conjugated polymers modified by metal-organic frameworks for heterogeneous photo-Fenton reactions.