Removal of Root Canal Fillings in Curved Canals Using Either Reciprocating Single- or Rotary Multi-instrument Systems and a Supplementary Step with the XP-Endo Finisher

Evaluation of the Ability of 3 Reciprocating Instruments to Remove Obturation Material: A Micro-Computed Tomography Study

INTRODUCTION

The purpose of this study was to evaluate the ability of the Reciproc, Reciproc Blue, and WaveOne Gold systems to remove filling material during endodontic retreatment of extracted human mandibular premolars.

METHODS

Thirty-nine teeth were instrumented with the Protaper Universal System to the F3 file and filled with the Tagger hybrid technique using an F3 gutta-percha cone and AH Plus cement. At the end of this period, the teeth were scanned with micro-computed tomography before and after removal of the filling material from the root canals. The teeth were divided into 3 groups (n = 13) based on the apical volume, depending on the systems used to remove the filling material. Group GR: Reciproc 40/.06; Group GRB: Reciproc Blue 40/.06; and Group GWG: WaveOne Gold 35/.06. The results were statistically analyzed using the tests of Kruskal-Wallis, Duncan, and analysis of variance at a significance level of 5%.

RESULTS

The results showed that there were no significant differences between the amounts of filling material removed, either for the apical and middle regions alone or in the overall evaluation for the 3 groups (P = .97). The time evaluation statistically showed that the GR and GWG groups required less time to clean the root canals than the GRB group.

CONCLUSIONS

Reciproc R40 files and WaveOne Gold Medium files required less time for endodontic treatment than Reciproc Blue R40 files. There was no difference in the ability to remove obturation material between the 3 instruments. No instrument was able to completely remove the filling material from the root canals.

The efficacy of various irrigation techniques on the removal of double antibiotic paste from simulated immature roots and the amount of apically extruded debris

OBJECTIVE

This study evaluated the effect of the XP-Endo Finisher (XPF), passive ultrasonic irrigation (PUI) and conventional irrigation using side-vented needle (SVN) on the amount of apically extruded debris and canal cleanliness following the removal of double antibiotic paste (DAP) from immature root canal models.

MATERIAL AND METHODS

Forty-eight extracted mandibular premolars were drilled using peeso drills to simulate immature apices. The canals were filled with DAP and were randomly assigned into 3 groups according to the DAP removal method: XPF, PUI, and SVN (n = 16). The amount of extruded debris was assessed with an analytical balance then roots were split longitudinally and imaged using stereomicroscope to evaluate the residual medicament. Data were statistically analyzed using Kruskal-Wallis and Dunn's test. Spearman's correlation coefficient was used to determine significant correlation between extruded debris and the residual DAP scores.

RESULTS

There was no significant difference between debris extrusion values for all groups (P value 0.237). For canal cleanliness, the amount of remaining DAP was significantly lower in the XPF and PUI compared to SVN (P value < 0.001). A non-significant positive (direct) correlation was found between the amounts of apically extruded debris and residual DAP scores (P value 0.087).

CONCLUSION

XPF and PUI were associated with better canal cleanliness during removal of DAP, no difference could be found between the three irrigation techniques regarding the debris extrusion.

Effectiveness of different supplementary protocols for remaining filling material removal in endodontic reintervention: an integrative review

The aim of this study was to perform an integrative review to identify the most effective supplementary protocols used after filling material (FM) removal and root canal reinstrumentation, during endodontic reintervention. The literature search was performed on the electronic databases PubMed and Latin American and Caribbean Health Sciences Literature (LILACS), using a combination of specific scientific descriptors. Selection criteria accepted articles published in English, Spanish and Portuguese languages, up to August 2021, involving in vitro and ex vivo studies. After applying the eligibility criteria, 46 articles were included for qualitative analysis. The tool for qualitative analysis of quasi-experimental studies of the Joanna Briggs Institute was used to determine the risk of bias of the included articles. The selected articles provided important data regarding the following supplementary protocols: sonic and ultrasonic activation of the irrigating solution; the use of ultrasonic inserts, XP-endo system instruments, and photon-induced photoacoustic streaming for mechanical debridement; and new devices as GentleWave system, and the self-adjusting file. Overall, all supplementary protocols demonstrated efficacy in removing the remaining FM. The implementation of various supplementary protocols can effectively remove the remaining FM from the root canal walls, although complete removal is not always achieved. However, it was not possible to determine the most effective protocol. Conversely, their association can enhance remaining FM removal. Remaining FM attached to root canal walls hinders proper chemical-mechanical preparation during endodontic reintervention. Supplementary protocols optimize the remaining FM removal, enhancing cleaning and disinfection of root canal.

In vitro evaluation of filling material removal and apical debris extrusion after retreatment using Reciproc blue, Hyflex EDM and ProTaper retreatment files

OBJECTIVES

To evaluate the amount of remaining filing material and apical debris extrusion after retreatment using Reciproc Blue, Hyflex EDM and ProTaper Retreatment Files.

MATERIALS AND METHODS

Thirty-six extracted permanent mandibular first molars with moderately curved mesial roots were selected. Mesiobuccal canals were prepared using the ProTaper Next system up to size X2 and filled using gutta-percha and Adseal sealer via cold lateral compaction. Teeth were randomly divided into three equal groups (n = 12): Group 1: Reciproc Blue (RB)(VDW, Germany), Group 2: Hyflex EDM (HEDM)(Coltene/Whaledent, Switzerland), Group 3: ProTaper Universal Retreatment file system + ProTaper Next file system (PTUR + PTN)( Dentsply Maillefer, Switzerland). Eppendorf tubes were used to collect the apically extruded debris. Cone-beam computed tomographic scans were taken prior to and after retreatment and the volume of remaining filling material was assessed at the coronal, middle and apical levels. Statistical analysis was performed using the Kruskal-Wallis test, Friedman's test and Wilcoxon Sign Rank test. Significance level was set at p value 0.05.

RESULTS

There were no statistically significant differences among the three groups in the reduction of the volume of the filling material or in the amount of apically extruded debris.

CONCLUSION

All the tested filing systems showed similar efficacy in removing the filling material, however, none of them could achieve its complete removal. Apical extrusion of debris occurred with all the systems used with no significant difference between the three groups.

Efficiency and complications in root canal retreatment using nickel titanium rotary file with continuous rotation, reciprocating, or adaptive motion in curved root canals: a laboratory investigation

BACKGROUND

It is currently unknown whether rotary file motion affects the best outcome of root canal retreatment. This experimental study compared the efficacy, efficiency, and complications of single-use NiTi rotary files using continuous rotation, reciprocating, and adaptive motions in root canal filling removal in curved root canals. Reciproc blue R25 was used with reciprocating motion (RB), VDW.ROTATE retreatment files with continuous rotation (VR), and ProTaper NEXT X2 with continuous rotation (PTNc) or adaptive motion (PTNa).

METHODS

Forty mesial root canals of extracted mandibular first and second molars with an angle of curvature between 20°-40° and a radius of curvature between 5 and 10 mm were collected. The specimens were instrumented and obturated with gutta-percha and AH Plus sealer using the continuous wave of condensation technique. The specimens were randomly divided into 4 retreatment groups (n = 10), RB, VR, PTNc, and PTNa. The percentage of root canal filling removal in each group was analyzed using Micro-Computed Tomography (µCT). The motor running time, total time, root canal complication, and instrument complication were recorded and statistically analyzed (p-value < 0.05).

RESULTS

The pre-operative root canal curvature and root canal filling volume were comparable among groups. The percentage of root canal filling removal from the whole canal in the PTNc, RB, PTNa, and VR group was 98%, 96%, 95%, and 93%, respectively. A significant difference was observed between the PTNc and VR groups for the whole canal and the apical-third part. The motor running time and total time were significantly different between the groups. Instrument fracture was observed at 40% in the VR and 20% in the PTNa group, but none in the RB and PTNc groups.

CONCLUSIONS

The ProTaper NEXT X2 with continuous rotation and RB files can be used with high efficacy and efficiency in curved root canal retreatment. Continuous rotation is more efficacious and efficient than adaptive motion when using the NiTi rotary file. Single file retreatment can be used in small canals with high efficacy, cost-effectiveness, and less time consumption.

Micro-CT evaluation of the removal of root fillings using rotary and reciprocating systems supplemented by XP-Endo Finisher, the Self-Adjusting File, or Er,Cr:YSGG laser

Objectives

This study aimed to compare the effectiveness of a single-file reciprocating system (WaveOne Gold, WOG) and a multi-file rotary system (ProTaper Universal Retreatment, PTUR) in removing canal filling from severely curved canals and to evaluate the possible adjunctive effects of XP-Endo Finisher (XPF), the Self-Adjusting File (SAF), and an erbium, chromium: yttrium, scandium, gallium garnet (Er,Cr:YSGG) laser using micro-computed tomography (μCT).

Materials and Methods

Sixty-six curved mandibular molars were divided into 2 groups based on the retreatment technique and then into 3 based on the supplementary method. The residual filling volumes and root canals were evaluated with μCT before and after retreatment, and after the supplementary steps. The data were statistically analyzed with the t-test, Mann-Whitney U test, analysis of covariance, and factorial analysis of variance (p < 0.05).

Results

PTUR and WOG showed no significant difference in removing filling materials (p > 0.05). The supplementary techniques were significantly more effective than reciprocating or rotary systems only (p < 0.01). The supplementary steps showed no significant differences in canal filling removal effectiveness (p > 0.05), but XPF showed less dentin reduction than the SAF and Er,Cr:YSGG laser (p < 0.01).

Conclusions

The supplementary methods significantly decreased the volume of residual filling materials. XPF caused minimal changes in root canal volume and might be preferred for retreatment in curved root canals. Supplementary approaches after retreatment procedures may improve root canal cleanliness.

Efficacy of different irrigation agitation systems in the removal of root canal sealers from artificial standardised grooves

The present study aims to assess the efficacy of different irrigation agitation systems in removing calcium silicate-based sealers from artificial standardised apical grooves. After the root canal instrumentation of 96 teeth, artificial apical grooves were created in half of each root. The samples were divided into two main groups according to the sealer type (AH Plus Jet [APJ] and Sure-Seal Root™ [SSR]) (n = 48). The root halves were then reassembled and divided into four experimental groups based on the final irrigation technique used: Conventional Syringe Irrigation (CSI), Ultrasonic Irrigant Agitation (UIA), Sonic Agitation (SA) and Manual Dynamic Agitation (MDA). The roots were then dissembled to assess the amount of root canal sealer. UIA significantly removed more of SSR sealer than CSI, MDA and SA while there was no statistical difference between CSI, MDA, SA and UIA groups in the APJ group. None of the irrigation agitation systems used had completely removed the APJ and SSR sealers. However, UIA was more effective in removing SSR sealer from the standardised apical groove than were CSI, MDA and SA.

Is XP-endo Finisher a better treatment option for its efficacy against intracanal bacteria for post-treatment apical periodontitis cases than EndoActivator?

To investigate the efficacy of the supplementary use of a rotary agitation method [XP-endo Finisher (XPF)] and sonically-activated irrigation [EndoActivator (EA)], using droplet digital PCR (ddPCR) on reducing the bacterial load in previously root canal treated teeth with apical periodontitis. Twenty patients with post-treatment apical periodontitis were allocated into two groups according to the irrigation activation method used: XPF and EA group. Total bacterial loads, as well as the amount of Enterococcus faecalis (E. faecalis) were determined before (S1) and after (S2) chemomechanical preparation, and after final irrigation activation (S3) by means of ddPCR. The bacterial copy numbers were compared between groups using the Friedman test (Nonparametric Repeated Measures ANOVA). When the groups were examined in terms of gender, age, number of root canals, periapical index score, sterility control total bacteria (SCTB), S1- and S2-total bacteria copy number, it was found that there was no statistical difference between the XPF group and the EA group (p > 0.05). Subsequent activation (S3) resulted in a significant microbial reduction in both XPF and EA groups, both of which reduced significantly more bacteria than chemomechanical instrumentation (S2) (p < 0.0001). On the contrary, S3-total bacteria copy number of the EA group was lower than the XPF group (p < 0.0147). There was no statistical difference between the XPF group and the EA group in terms of E. faecalis copy number (p > 0.05). Although both the XPF and the EA optimised the antibacterial efficiency of chemomechanical preparation in previously root canal-treated teeth with apical periodontitis, a lower total bacterial copy number was achieved with the EA application than the XPF application.

Evaluation of the efficacy of rotary and reciprocating systems for the removal of filling material for various root canal filling techniques

Background

This study aimed to evaluate the efficacy of various filling and retreatment techniques for oval-shaped root canals.

Methods

Sixty distal roots of mandibular molar teeth were included in the study. The roots were prepared using the ProTaper Next (PTN) X4 rotary system and irrigation with 2.5% NaOCl. The roots were then divided into three groups and filled with Total Fill BC Sealer (FKG Dentaire) using three different techniques (n=20): single cone (SC), GuttaCore (GC), and warm vertical condensation (WVC). The retreatment procedure was performed using two different instrumentation techniques: Reciproc 50 (R50) and PTN X5 (n=10). To analyze the remaining filling material, the roots were divided buccolingually in two parts with the help of diamond separators, and photographs were taken at x16 magnification using a dental operating microscope (DOM). The ratio of the remaining filling materials was calculated using image analysis software and statistically evaluated using the Kruskal-Wallis test.

Results

None of the assessed retreatment procedures completely removed the filling materials from the root canals. For both instrumentation techniques, more root canal filling material remained in the WVC group (P<0.05).

Conclusion

The GC filling technique had a higher cleaning percentage than the WVC and SC techniques in the coronal region. The R50 system was found to be superior to the PTN X5 system for retreatment, and the root canal fillings applied using the WVC technique were more difficult to remove than the fillings applied using the other techniques.

Assessment of the root surface temperature during the use of intracanal agitation systems: In vitro study

This study aimed to evaluate the temperature changes that the different methods of agitation of irrigants promote on the external dental root surface. Nine extracted human lower premolars were standardized by cone-beam computed tomography and used. The root canal was instrumented with a Reciproc 40.06 file. Temperature measurement was performed using K-type thermocouple sensors attached to the middle, cervical, and apical thirds of the teeth. The teeth had their roots immersed in distilled water at 37ºC, which were distributed into 3 experimental groups according to the mechanical agitation methods to be studied. US Group (n=3), Irrisonic Ultrasonic Tip activated through ultrasound; EC Group (n=3), Easyclean Tip coupled to a contra-angle low-speed handpiece; XP Group (n=3), XP-endo Finisher file coupled to an endodontic electrical motor. Temperature measurements were performed simultaneously with agitation and irrigation of intracanal irrigants. Statistical analysis was performed using SPSS software with a significance level of 5%. For multiple comparisons, the Tukey test was used. The association between mechanical agitation methods and root third was statistically significant. Regarding the temperatures recorded on the external surface of the roots, the ultrasonic tip was significantly higher than the XP-endo Finisher file and the Easyclean tip, which did not differ from each other. Regarding the ultrasonic tip, the external temperature in the middle third (39.46ºC) of the root was significantly lower than in the cervical (40.41ºC) and apical third (40.53ºC). None of the agitation methods of irrigants studied presented heating above 47ºC, and their use is safe for periodontal tissues.

Removal of Thermafil obturators using two different techniques: A comparative Ex Vivo study

INTRODUCTION

The aim of this ex vivo study was to compare two techniques for removal of Thermafil obturators from curved root canals in mandibular molars.

METHODS

Sixty mesial root canals in extracted mandibular molars were distributed into matched pairs according to degree and radius of curvature and were prepared to size 35/.04 and obturated with Thermafil obturators size 35. Each tooth was embedded in resin, mounted in a mannequin head and isolated with rubber dam to simulate clinical conditions. Removal of obturators was undertaken under a dental operating microscope by an experienced endodontist using either the FragRemover loop device, or reciprocating NiTi instruments. Pre- and postoperative micro-CT scans were taken to compare the amount of remaining filling material and of removed dentin. Eventual problems during removal attempts were recorded.

RESULTS

Using Reciproc 24 carriers (80%) were removed, 16 in one piece, 8 in small pieces, in 6 cases removal failed. The FragRemover removed 12 carriers (40%), all of these completely, but in 18 cases removal failed (P < 0.05). Reciproc left less remaining filling material than the FragRemover (P < 0.05) but removed significantly more dentin in the apical part of the root canal (P < 0.01). There was no significant difference concerning the total amount of removed dentin (P > 0.05) between both groups. Seven complications occurred in the Reciproc group. In five teeth working length could not be reached, in two teeth a Reciproc file R25 fractured. With the FragRemover 64 complications occurred, in 36 cases, including second removal attempts, the loop slipped over the carrier, in 24 cases the top of the carrier was sheared off. In nine cases separation of the core occurred too far apically, not allowing further use of the FragRemover. In four cases the wire loop tore.

CONCLUSIONS

Reciproc was more effective in removal of Thermafil carriers, whereas using the FragRemover less dentin was removed in the apical part of the root canal and more obturation material was left.

Effectiveness of endodontic retreatment using WaveOne Primary files in reciprocating and rotary motions

Objectives

This study evaluated the efficiency of WaveOne Primary files (Dentsply Sirona) for removing root canal fillings with 2 types of movement: reciprocating (RCP) and continuous counterclockwise rotation (CCR).

Materials and Methods

Twenty mandibular incisors were prepared with a RCP instrument (25.08) and filled using the Tagger hybrid obturation technique. The teeth were retreated with a WaveOne Primary file and randomly allocated to 2 experimental retreatment groups (n = 10) according to movement type: RCP and CCR. The root canals were emptied of filling material in the first 3 steps of insertion, until reaching the working length. The timing of retreatment and procedure errors were recorded for all samples. The specimens were scanned before and after the retreatment procedure with micro-computed tomography to calculate the percentage and volume (mm³) of the residual filling material. The results were statistically evaluated using paired and independent t-tests, with a significance level set at 5%.

Results

No significant difference was found in the timing of filling removal between the groups, with a mean of 322 seconds (RCP) and 327 seconds (CCR) (p < 0.05). There were 6 instrument fractures: 1 in a RCP motion file and 5 in continuous rotation files. The volumes of residual filling material were similar (9.94% for RCP and 15.94% for CCR; p > 0.05).

Conclusions

The WaveOne Primary files used in retreatment performed similarly in both RCP and CCR movements. Neither movement type completely removed the obturation material, but the RCP movement provided greater safety.

Apical transportation using Mtwo or Reciproc retreatment systems in severely curved canals: a micro-computed tomographic study

OBJECTIVE

To assess apical root canal transportation using Mtwo or Reciproc during retreatment of severely curved canals, using a multi-analytical approach.

METHODS

Forty mesial canals from mandibular molars (Vertucci type IV) were evaluated before and after endodontic retreatment to compare apical transportation with Mtwo retreatment or Reciproc. The systems were used on the same root but alternating the mesial canals. The analyses were performed by micro-computed tomography. Four evaluations were performed: (a) longitudinal transportation, (b) horizontal transportation, (c) variation in the angle of curvature of the canal, and (d) canal-root width ratio. Horizontal transportation and canal-root width ratio were evaluated in 1-, 3-, and 5-mm levels.

RESULTS

Longitudinal transportation occurred in all samples, with a mean of 0.13 mm for Mtwo and 0.17 mm for Reciproc. Horizontal transportation increased as distant from the apex was the evaluated level, in mean. However, the transport was not observed in all samples. The mean angle of curvature was 4.16 for Mtwo and 3.03 for Reciproc. Canal-root width decreased as distant from the apex was the evaluated level. No significant differences were observed considering all tested variables, independently of the retreatment system or evaluated level (p > 0.05).

CONCLUSION

Mtwo retreatment and Reciproc presented similar apical transportation (horizontal or vertical).

CLINICAL RELEVANCE

Both Mtwo retreatment and Reciproc systems could be considered safe regarding apical transportation.

Effect of solvent on root canal filling material removal by two different rotary file systems in C-shaped root canals

This study compared the percentage reduction of total obturation materials, gutta-percha and sealer, using two rotary file systems with/without solvent in retreating C-shaped root canals and to evaluate the effect of the solvent on instrument separation. C-shaped root canals were scanned using micro-CT to identify the root canal morphology and randomly assigned to four groups (n = 12). Retreatment was performed using ProTaper Universal Retreatment (PTUR) or XP-endo systems with/without solvent. The number of separated instruments were recorded. The samples were scanned pre- and post-retreatment. The percentage reduction of total obturation materials, gutta-percha and sealer, were calculated. The percentage reduction of gutta-percha in the PTUR without solvent group was significantly lower than the other groups (P = 0.018). The number of separated instruments in the solvent groups were significantly lower than the no solvent groups (P < 0.05). Solvent increased gutta-percha removal, when using PTUR and decreased the occurrence of separated instruments for both systems.

Full counterclockwise rotary motion kinematics enhances the removal of gutta-percha and bioceramic sealer from root canals: A computed tomographic study

Background and Aim

Complete removal of gutta-percha and sealer is an important step during retreatment. The aim of this study was to assess the efficacy and time taken by full counterclockwise rotary motion of a reciprocating file in the removal of gutta-percha and BioRoot™ RCS bioceramic sealer.

Materials and Methods

Thirty-six extracted human mandibular premolars were instrumented with Mtwo rotary files and obturated using lateral condensation technique with gutta-percha and BioRoot™ RCS bioceramic sealer. The teeth were divided into three retreatment groups (n = 12) based on the kinematics used: Group I, Mtwo retreatment (Mtwo-R) files; Group II, Reciproc files used in reciprocation mode (Reciproc-R); and Group III, Reciproc files used in full counterclockwise motion (Reciproc-CCW). The efficacy of gutta-percha and bioceramic sealer removal was assessed by volume of gutta-percha removed using cone-beam computed tomography and area of remaining gutta-percha and bioceramic sealer using ImageJ software after longitudinal sectioning. Statistical analysis was done by one-way analysis of variance test and Tukey's multiple post hoc tests.

Results

Reciproc-CCW motion was significantly efficient in the removal of gutta-percha and bioceramic sealer in comparison to Mtwo-R files and Reciproc-R. The time taken for gutta-percha and sealer removal was least for Reciproc-R (325.5 ± 101.68 seconds) and was statistically significant in comparison to the other groups.

Conclusion

Within the limitations of the study, Reciproc-CCW was an effective method of removal of gutta-percha and bioceramic sealer during retreatment.

The Effect of Primary Root Canal Treatment on Dentinal Tubule Penetration of Calcium Silicate-based Sealers during Endodontic Retreatment

INTRODUCTION

The aim of this study was to evaluate the effect of previous root canal treatment on dentinal tubule penetration of calcium silicate-based sealers during endodontic retreatment and to compare 2 different (commonly used and modified) tubule penetration depth measurement techniques.

METHODS

The crowns of mandibular premolar teeth were removed, and root canals were prepared (ProTaper Universal; Dentsply Sirona, York, PA) and obturated using AH Plus (AH; Dentsply DeTrey, Konstanz, Germany), MTA Fillapex (MTAF; Angelus, Londrina, Brazil), and WellRoot ST (WRST; Vericom, Gyeonggi-do, South Korea); 0.1% red Rhod-2 dye (Chemodex, St Gallen, Switzerland) was added to the sealers. After storage for 3 weeks (37°C, 100% humid), the following sealer combination subgroups were created (the sealer used during the primary root canal treatment/the sealer used during the retreatment, n = 8): AH/AH, AH/MTAF, and AH/WRST; MTAF/AH, MTAF/MTAF, and MTAF/WRST; and WRST/AH, WRST/MTAF, and WRST/WRST. Green Fluo-3 dye (0.1%) was added to the sealers during retreatment. Sealer penetration depths were measured at 8 points and averaged, and the ratio of the retreatment sealer to the initial sealer was recorded as the mean tubule penetration depth ratio in the first technique, whereas the percentage of the circumferential penetration area ratios of the retreatment and initial sealers was calculated in the second technique. Statistical analyses were performed using Kolmogorov-Smirnov, Kruskal-Wallis, and Mann-Whitney U tests.

RESULTS

The mean penetration depth of AH and MTFA was found to be higher at the coronal third region in the control groups (P < .05). Both methods showed a significant difference among the groups at the coronal and median regions (P < .05). The AH/WRST, MTAH/AH, MTAF/MTAF, MTAF/WRSTS, and WRST/WRST groups showed deeper tubule penetration (first technique, P = .01). Both techniques showed that the penetration depth of the sealers was the same at the apical region (P > .05), whereas a difference was found among the techniques at the coronal and median regions. The sealers used in the previous root canal treatment limited the penetration depth of the sealers used during the retreatment process (P < .05). When MTAF was used as the initial sealer, the penetration depth of the second sealer did not change, whereas if WRST was the initial sealer, the penetration depth of the sealers at the median and apical regions is negatively affected during the retreatment process (P < .05).

CONCLUSIONS

Previous root canal treatment affects the penetration depth of calcium silicate-based sealers. The use of AH Plus and MTA Fillapex during the retreatment process showed an advantage. Both measurement techniques showed similar performances at the apical region, whereas the results varied at the coronal and midcoronal regions; therefore, a more stable sealer penetration measurement technique is still necessary.

Effectiveness and safety of rotary and reciprocating kinematics for retreatment of curved root canals: a systematic review of in vitro studies

Objectives

This systematic review (register-osf.io/wg7ba) compared the efficacy and safety of rotary and reciprocating kinematics in the removal of filling material from curved root canals.

Materials and Methods

Only in vitro studies evaluating both kinematics during retreatment were included. A systematic search (PubMed/MEDLINE, Scopus, and other databases, until January 2021), data extraction, and risk of bias analysis (Joanna Briggs Institute checklist) were performed. Efficacy in filling removal was the primary outcome.

Results

The search resulted in 2,795 studies, of which 15 were included. Efficacy was measured in terms of the remaining filling material and the time required for this. Nine studies evaluated filling material removal, of which 7 found no significant differences between rotary and reciprocating kinematics. Regarding the time for filling removal, 5 studies showed no difference between both kinematics, 2 studies showed faster results with rotary systems, and other 2 showed the opposite. No significant differences were found in apical transportation, centering ability, instrument failure, dentin removed and extruded debris. A low risk of bias was observed.

Conclusions

This review suggests that the choice of rotary or reciprocating kinematics does not influence the efficacy of filling removal from curved root canals. Further studies are needed to compare the kinematics safety in curved root canals.

The Efficacy of Two Novel Retreatment Systems in the Removal of Root Canal Obturating Materials (An In vitro Study)

BACKGROUND: The complete removal of root filling material is one of the main goals of non-surgical endodontic retreatment. Thus, the development of new techniques and instruments aiming to promote this task presents clinical significance. AIM: The purpose of the study was to assess the amount of residual root canal filling materials (gutta-percha/sealer) after using two different endodontic retreatment systems and ultrasonic tip. METHODS: Forty-five mandibular premolar teeth were mechanically instrumented and obturated. Retreatment was performed using two different Endostar RE (Group 2), Rogin retreatment system (Group 3), and ultrasonic tip (Group 1). Roots were separated buccolingually into two halves. A digital camera connected to the stereomicroscope captured images to each half. Image-J software was used to evaluate and measure the areas with remaining filling material in each third (cervical, middle, and apical). RESULTS: Data analysis revealed significant differences between the groups in the coronal, middle, and apical thirds (p < 0.05). The ultrasonic retreatment tips (G1) were significantly more efficient in removing the gutta-percha and sealers compared to the Rogin (G3) and Endostar (G2) retreatment endodontic kits. CONCLUSIONS: All the file systems left some filling material in the canals. Ultrasonic retreatment tip had maximum efficacy for the removal of filling materials in comparison with the retreatment file systems under investigation.

Evaluation of irrigation techniques in the removal of root canal filling material: Micro-CT and SEM study

Background/Aim: This study aimed to compare the different irrigation activation methods in retreatment of oval-shaped root canals. Material and Methods: Forty distal canals from mandibular molars were filled. After the removal of filling material, specimens were assigned to four groups as follows; control, passive ultrasonic irrigation (PUI), self-adjusting file (SAF), and XP-endo Finisher (XPF). The amount of residual filling material was assessed by micro-computed tomography (micro-CT) and root canal walls were examined by using scanning electrom microscopy (SEM). Data were analyzed using the Kruskal-Wallis and Dunn test. Results: None of the activation techniques removed root canal remnants completely. The amount of filling material significantly decreased in all activation techniques compared to the control group (p<0.05). There was no significant difference between the PUI, SAF, and XPF groups in the micro-CT analysis (p>0.05). SEM evaluation showed higher scores in the apical region in all groups (p<0.05). Conclusions: The use of activation methods reduces the amount of residual filling material.

Efficacy of reciprocating instruments and final irrigant activation protocols on retreatment of mesiobuccal roots of maxillary molars: a micro-CT analysis

Objectives

This study evaluated the efficacy of 3 reciprocating systems and the effects of 2 instruments for irrigant activation on filling material removal.

Materials and Methods

Forty mesiobuccal roots of maxillary molars were prepared up to size 25.06 and obturated. Micro-computed tomography (micro-CT) examination #1 was performed. Teeth were then divided into 4 groups (n = 10), according to the retreatment protocol: (1) manual, (2) Reciproc Blue, (3) WaveOne Gold, and (4) X1 Blue. Micro-CT examinations #2 and #3 were performed after filling removal and repreparation, respectively. Next, all teeth were divided into 2 new groups (n = 20) according to the irrigant activation protocol: XP Clean (XP Clean size 25.02) and Flatsonic (Flatsonic ultrasonic tip). Micro-CT examination #4 was performed after irrigant activation. Statistical analysis was performed with a significance level set at 5%.

Results

WaveOne Gold removed a significantly greater amount of filling material than the manual group (p < 0.05). The time to reach the WL was similar for all reciprocating systems (p > 0.05). X1 Blue was faster than the manual group (p < 0.05). Only manual group improved the filling material removal after the repreparation stage (p < 0.05). Both activation protocols significantly improved the filling material removal (p < 0.05), without differences between them (p > 0.05).

Conclusions

None of the tested instruments completely removed the filling material. X1 Blue size 25.06 reached the working length in the shortest time. XP Clean and Flatsonic improved the filling material removal.

Fracture incidence of Reciproc instruments during root canal retreatment performed by postgraduate students: a cross-sectional retrospective clinical study

Objectives

To evaluate the fracture incidence of Reciproc R25 instruments (VDW) used during non-surgical root canal retreatments performed by students in a postgraduate endodontic program.

Materials and Methods

From the analysis of clinical record cards and periapical radiographs of root canal retreatments performed by postgraduate students using the Reciproc R25, a total of 1,016 teeth (2,544 root canals) were selected. The instruments were discarded after a single use. The general incidence of instrument fractures and its frequency was analyzed considering the group of teeth and the root thirds where the fractures occurred. Statistical analysis was performed using the χ² test (p < 0.01).

Results

Seven instruments were separated during the procedures. The percentage of fracture in relation to the number of instrumented canals was 0.27% and 0.68% in relation to the number of instrumented teeth. Four fractures occurred in maxillary molars, 1 in a mandibular molar, 1 in a mandibular premolar and 1 in a maxillary incisor. A greater number of fractures was observed in molars when compared with the number of fractures observed in the other dental groups (p < 0.01). Considering all of the instrument fractures, 71.43% were located in the apical third and 28.57% in the middle third (p < 0.01). One instrument fragment was removed, one bypassed, while in 5 cases, the instrument fragment remained inside the root canal.

Conclusions

The use of Reciproc R25 instruments in root canal retreatments carried out by postgraduate students was associated with a low incidence of fractures.

Impact of irrigation protocols with some chelators and mechanical agitation on intratubular decontamination

This study evaluated main canal and intratubular decontamination using different irrigation solutions followed by adjunctive agitation steps for infected root canals. Sixty-eight lower incisors were contaminated with Enterococcus faecalis and allocated to groups according to canal treatment (n = 10): G1, NaOCl followed by ethylenediaminetetraacetic acid (EDTA); G2, a mixture of NaOCl with hydroxyethylidene bisphosphonate (HEBP); and G3, NaOCl followed by EDTA-T (EDTA with sodium lauryl ether sulfate). All three groups of teeth were agitated with passive ultrasonic irrigation (PUI) using saline solution, whereby G4, G5, and G6 were prepared as above, and agitation was performed using an XP-Endo Finisher instrument. Microbiological samples were collected from the root canals with paper points at three times: before and after chemomechanical preparation and after agitation. The colony-forming units (CFU)/mL count was determined, and bacterial intratubular viability was analyzed via confocal laser scanning microscopy using Live/Dead staining. Statistical analysis was performed using a Kruskal-Wallis test followed by Dunn tests. A Friedman test was applied for colony-counting data (α = 0.05). CFU/mL counting indicated equally effective decontamination in the experimental groups (p > 0.05). According to microscopy images, the use of irrigation solutions followed by agitation with the XP-Endo Finisher yielded better results. Moreover, NaOCl+EDTA-T followed by XP-Endo Finisher resulted in significantly lower viability than in the PUI-activated groups (p < 0.05). The cervical and medium thirds of the specimens presented similar results. Overall, NaOCl+EDTA-T exhibited the best intratubular antibacterial activity, mainly for canals that were subsequently agitated using XP-Endo Finisher.

Critical analysis of research methods and experimental models to study removal of root filling materials

Despite enjoying high favourable outcome rates, root canal treatment is not always successful. Root canal retreatment is a widely practised option for managing a non-healing root treated tooth. A basic distinction between retreatment and initial treatment is the requirement to remove the existing root filling material occupying the root canal space. Only then, can the technical deficiencies and possible causes of failure be addressed. Hence, the successful removal of the root filling material is critical to achieving the objectives of retreatment. Many different materials and techniques have been used for root canal filling, which have been documented in a plethora of studies; these are mainly laboratory studies investigating the removal of root filling materials. To help guide future research, which may then better inform clinical practice in relation to retreatment procedures, the focus of this narrative review is on the research methods and experimental models employed to study the removal of root filling materials. The current available literature demonstrates great variation in the research methodologies used to study the removal of root filling material, including direct visualization by splitting tooth samples or clearing, three-dimensional radiographic imaging including using microcomputed tomography or cone-beam computed tomography, and a combination of these techniques. Depending on the research method employed, variation also exists in quantification of root filling material removal; these include measurements of surface area, volume or weight, and criteria-based (semi-quantitative) assessment. Experimental models, using human teeth or resin models, differ with respect to standardization techniques and replication of the clinical scenario including initial sample preparation, canal filling, allocation and technical aspects of retreatment procedures. Future models should replicate, as closely as possible, the clinical scenario. Currently, microcomputed tomography provides a highly detailed, non-invasive and non-destructive method of objectively assessing and quantifying root filling removal.

Metallurgical characterisation and torsional resistance of blue thermomechanically treated nickel titanium instruments after simulated ex vivo retreatment procedure

To compare used and unused Reciproc Blue and Reciproc after retreatment, the instruments were used in the mesiobuccal canals of maxillary molars with curvature. The torsional resistances were tested and then unused instruments were subjected to XRD, DSC and microhardness tests. Student's t, ANOVA and Tukey's tests were performed (α-level 0.05). The torsional strength of used Reciproc Blue was not significantly different than unused ones (P > .05), while torsional strength of Reciproc decreased significantly (P < .05). DSC and XRD indicated that Reciproc Blue exhibited prominent transformation peaks corresponding austenite to R-phase. Microhardness of Reciproc was significantly higher (P < .05). A second reuse of Reciproc Blue for retreatment could be considered safe in terms of torsional strength. Blue treatment also decreased surface microhardness of the instrument and changed phase composition by increasing the R-phase.

The effectiveness of the supplementary use of the XP-endo Finisher on bacteria content reduction: a systematic review and meta-analysis

Objectives

This systematic review evaluated the efficacy of the supplementary use of the XP-endo Finisher on bacteria content reduction in the root canal system.

Materials and Methods

In-vitro studies evaluating the use of the XP-endo Finisher on bacteria content were searched in four databases in July 2020. Two authors independently screened the studies for eligibility. Data were extracted, and risk of bias was assessed. Data were meta-analyzed by using random-effects model to compare the effect of the supplementary use (experimental) or not (control) of the XP-endo Finisher on bacteria counting reduction, and results from different endodontic protocols were combined. Four studies met the inclusion criteria while 1 study was excluded from the meta-analysis due to its high risk of bias and outlier data. The 3 studies that made it to the meta-analysis had an unclear risk of bias for at least one criterion.

Results

No heterogeneity was observed among the results of the studies included in the meta-analysis. The study excluded from the meta-analysis assessing the bacteria counting deep in the dentin demonstrated further bacteria reduction upon the use of the XP-endo Finisher.

Conclusions

This systematic review found no evidence supporting the supplementary use of the XP-endo Finisher on further bacteria counting the reduction in the root canal.

Micro-cleanliness of Hard Tissue Debris After Advanced Irrigation and Comparison Between EndoVac and XP-endo Finisher: A Microcomputed Tomographic Study

Introduction:

Conventional irrigation techniques do not remove debris adequately. The remaining tissue debris cause infection inside the root canal and may also affect the seal of the root canal. The study aimed to compare the ability of EndoVac (EV) with XP-endo finisher (XPF) in debris removal using micro-CT analysis.

Materials and Methods:

We used 12 lower first permanent molar human teeth for this study. The root canals were instrumented using a small TF adaptive system. Then, the volume of debris was calculated. Teeth were divided into two groups, according to advanced irrigation methods, with six teeth per group: EV group and XPF group. The volume of debris was calculated again. The paired-sample t-test was used to compare the volume of the debris before and after the use of advanced irrigation methods with the statistical significance of P < 0.05. The percentage of debris reduction was also calculated.

Results:

Both EV and XPF showed a significant decrease of debris in the mesial canals (P < 0.05), whereas EV only showed a significant reduction of debris in the distal canals.

Conclusion:

Both EV and XPF were able to significantly reduce debris after instrumentation in the mesial canals of lower first mandibular molars.

Clinical Significance:

The study provides insight into the recent advanced methods used in debris removal and canal disinfection.

Supplementary solvent irrigation efficacy on filling remnants removal comparing XP-endo Finisher R vs IrriSafe

This study aimed to compare the efficacy of XP-endo Finisher R and IrriSafe, with a solvent mixture of Methyl ethyl ketone/Tetrachloroethylene (MEK/TCE), in the removal of root filling residues. Twenty-four human mandibular incisors were pair-matched by micro-computed tomography according to volume and aspect ratio. After retreatment, specimens were allocated to two experimental groups (n = 12), according to the supplementary instrument used. The volume of residual filling material after each irrigating step and the time for retreatment was calculated. Statistical analyses were carried out using Mann-Whitney test, with a significance level of 5%. The volume of initial root canal filling material between the groups was similar (p > 0.05). With the final irrigation protocol (NaOCl and EDTA) the volume of the filling remnants decreased significantly (p < 0.05) with no differences between IrriSafe or XP-endo Finisher R (p > 0.05). The additional solvent mixture MEK/TCE increased the efficiency of filling materials reduction, regardless of the agitating instruments employed, IrriSafe or XP-endo Finisher R (p < 0.05). There was no difference between the two groups regarding the time (p = 0.149). Both supplementary instruments were effective in the reduction of filling remnants. The additional step with a solvent mixture of MEK/TCE enabled a total recovery of patency and the achievement of cleaner canals, independently of the agitation instrument.

Effectiveness of XP-Endo Finisher and passive ultrasonic irrigation on intracanal medicament removal from root canals: a systematic review and meta-analysis

Background

XP-Endo Finisher (XPF) and passive ultrasonic irrigation (PUI) are commonly used in intracanal medicament removal. The effectiveness of these two techniques needs to be compared, and evidence-based research should be conducted.

Methods

A comprehensive literature search was conducted in PubMed, Web of Science, Embase, Cochrane Library, and Google Scholar up to December 20th, 2020. The outcomes of the included trials were pooled into the Cochrane Collaboration’s Review Manager 5.3 software. Cochrane’s risk-of-bias tool 2.0 was applied to assess the risk of bias.

Results

Nine articles were included in this systematic review and processed for data extraction, and eight studies were identified for meta-analysis. In general, the use of PUI showed better medicament removal effectiveness than XPF (odds ratio [OR]: 3.09; 95% confidence interval [CI], 1.96–4.86; P < 0.001). PUI was also significantly more efficient than XPF in the apical third (OR: 3.42; 95% CI, 1.32–8.84; P = 0.01). For trials using sodium hypochlorite (NaOCl) alone, PUI was also significantly more effective than XPF on intracanal medicaments removal (OR: 5.23; 95% CI, 2.79–9.82; P < 0.001). However, there was no significant difference between PUI and XPF when NaOCl and ethylenediaminetetraacetic acid (EDTA) were used in combination (OR: 1.51; 95% CI, 0.74–3.09; P = 0.26). In addition, for studies whose intracanal medicament periods were two weeks, the effectiveness of PUI was statistically better than the XPF (OR: 7.73; 95% CI, 3.71–16.07; P < 0.001). Nevertheless, for trials whose intracanal medicament time was one week or over two weeks, no differences between the XPF and PUI were found (OR: 1.54; 95% CI, 0.74–3.22; P = 0.25) (OR: 1.42; 95% CI, 0.44–4.61; P = 0.56).

Conclusions

The meta-analysis is the first study to quantitatively compare the effectiveness of XPF and PUI techniques on intracanal medicaments removal. With rigorous eligibility criteria, the study only included high-quality randomised controlled trials. The study indicated that PUI might be superior over XPF techniques for removing intracanal medicaments from artificial standardized grooves and cavities in the root canal system. The anatomical areas, irrigation protocol, and intracanal medicaments time may influence the cleaning efficacy.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-021-01644-7.

Adjunctive procedure with solvent mixtures in non-surgical endodontic retreatment: does it affect root dentin hardness?

The aim of this study was to compare the effects of new irrigation solvent mixtures with Methyl ethyl ketone (MEK)/Tetrachloroethylene (TCE) and MEK/Orange oil (OOil), and different agitation techniques on dentin hardness. One hundred forty-four mandibular teeth were prepared and standardized, with each root's middle part transversely sectioned. Initial hardness was measured using a Vickers microhardness tester. Specimens were divided into four groups of agitation techniques (n = 36): no agitation; EndoActivator; IrriSafe; and XP-endo Finisher R. Each group was subdivided into six subgroups of irrigation protocols (n = 6): saline solution; NaOCl + EDTA; NaOCl + EDTA + MEK/TCE; MEK/TCE; NaOCl + EDTA + MEK/OOil; MEK/OOil. Final hardness was measured. The irrigation protocols NaOCl + EDTA, NaOCl + EDTA + MEK/TCE, and NaOCl + EDTA + MEK/OOil significantly decreased dentin hardness, while MEK/OOil increased it (p < 0.05). Comparing to NaOCl + EDTA sequence, dentin hardness increased significantly with the additional exposure to MEK/TCE (3%NaOCl + 17%EDTA + MEK/TCE) or MEK/OOil (3%NaOCl + 17%EDTA + MEK/OOil) (p < 0.05). There were no significant differences regarding agitation effects on dentin hardness decrease. The irrigation protocols affected dentin hardness significantly. However, the additional solvent proposals do not seem to address further concerns on dentin's mechanical properties. Agitation did not show any influence on dentin's hardness reduction.

Efficacy of an arrow-shaped ultrasonic tip for the removal of residual root canal filling materials

This study aimed to evaluate the efficacy of supplementary methods to remove the remaining root filling material from root canals. Twenty mandibular single-rooted teeth were instrumented with Reciproc 25/0.08 and filled with gutta-percha and AH-Plus sealer, followed by a micro-CT scanning. The retreatment procedures were performed, the samples were rescanned and divided into two groups (n = 10) according to the supplementary method: XP-endo Finisher R and Clearsonic tip. The samples were rescanned and the volume of remaining root filling material was quantified. Data were analysed statistically (P < 0.05). The amount of filling material removed after supplementary methods was higher compared with retreatment procedure (P < 0.05). XP-endo Finisher R promoted a greater percentage of filling materials reduction in the entire root canal and apical third compared with Clearsonic tip (P < 0.05). Supplementary methods were effective in the reduction of root filling materials. XP-endo Finisher R removed more root filling material than Clearsonic tip.

Efficacy of Removing Thermafil and GuttaCore from Straight Root Canal Systems Using a Novel Non-Surgical Root Canal Re-Treatment System: A Micro-Computed Tomography Analysis

The present study aims to evaluate the effectiveness of an XP-endo non-surgical root canal re-treatment system in removing both GuttaCore and Thermafil gutta-percha carrier-based root canal filling materials from straight root canal systems using micro-computed tomography (micro-CT) analysis. The study was performed on 20 single-rooted upper teeth, which were randomly allocated into the following study groups: Group A, Thermafil and AH Plus sealer (n = 10); Group B, GuttaCore and AH Plus sealer (n = 10). Before and after the non-surgical root canal re-treatment procedure, the samples were submitted for a micro-CT analysis. The volume of the root canal filling material (mm³), the volume of the remaining root canal filling material (mm³) and the time (minutes) needed to remove the root canal filling material were also recorded. Student's t-test was used to analyze the results. No statistically significant differences were found between the volume of the remaining root canal filling material in the GuttaCore and Thermafil root canal filling systems at the coronal third (p = 0.782), middle third (p = 0.838) or apical third (p = 0.882) of the straight root canal systems; however, the GuttaCore required a statistically significant (p = 0.037) shorter amount of time (4.72 ± 0.76 min) to be removed than the Thermafil carrier-based root canal filling material (5.92 ± 1.42 min). The XP-endo Finisher non-surgical endodontic re-treatment system removes both GuttaCore and Thermafil gutta-percha carrier-based root canal filling materials from straight root canal systems, although removal of the GuttaCore gutta-percha carrier-based root canal filling material required less time.

Contribution of XP-Endo files to the root canal filling removal: A systematic review and meta-analysis of in vitro studies

This review was designed to analyse whether the supplementary use of XP-Endo Finisher and XP-Endo Finisher R contributes to the removal of root canal filling materials. Databases were searched up to November 2020. Studies were critically assessed according to inclusion and exclusion criteria. Risk of bias evaluation was performed. Pooled standardised mean differences (SMD) and 95% confidence intervals (95% CI) were calculated. Ten studies involving 192 teeth were eligible for systematic review and meta-analysis could be performed with eight of these studies. Strong evidence showed that XP-Endo Finisher R file contributed significantly to filling material removal from root canals (SMD (95% CI): 0.41 (0.06-0.76)). Although the evidence was conflicting, XP-Endo Finisher R file was superior than other irrigant activation techniques (SMD (95% CI): 0.47 (0.02-0.93)). The supplementary use of XP-Endo Finisher and XP-Endo Finisher R is beneficial in further removal of root canal filling materials from root canal system.

A Digital Microscopic Inspection of Dentinal Defects after Using Endodontic Retreatment Files

Aim

The study aimed at evaluating the incidence of dentinal defects after root canal retreatment with ProTaper Universal retreatment (PTUR) and XP-endo Shaper and Finisher R (XP).

Materials and Methods

Sixty extracted single-rooted human premolars were selected and divided into 4 groups of 15 teeth each. In the negative control group, the teeth were left unprepared. In the positive control group, the teeth were prepared with ProTaper Next and obturated with no further retreatment. In the PTUR and XP groups, the teeth were prepared and obturated followed by removal of the filling material at body temperature using PTUR and XP instruments, respectively. The roots were then sectioned at 3, 6, and 9 mm from the apex and observed under a digital microscope to detect defects.

Results

PTUR group showed significantly higher (p value <0.05) incidence of defects than the other groups. Comparison of no defects versus defects between groups in different areas of root canals demonstrated significant difference among the groups in the apical and cervical regions.

Conclusion

Within the limitations of the present study, PTUR files created significantly more dentinal defects than XP files, with most of those defects at the cervical and apical areas of the root canals.

Safety and Effectiveness of Additional Apical Preparation using a Rotary Heat-treated Nickel-Titanium file with Larger Diameter and Minimum Taper in Retreatment of Curved Root Canals

OBJECTIVE

 The aim of this study was to investigate the effect of additional apical preparation using the ProDesign Logic (PDL) 50/.01 rotary heat-treated nickel-titanium (NiTi) file with a larger diameter and minimal taper for retreatment of curved root canals.

MATERIALS AND METHODS

 Mesial curved root canals of 12 mandibular molars were prepared using PDL 25/.06 and filled using the continuous wave of condensation technique and AH Plus sealer. After retreatment using ProDesign S (PDS) 25/.08, PDL 25/.06 and PDL 35/05, a complementary procedure was performed with PDL 50/.01. Microcomputed tomography (micro-CT) scanning was performed before and after retreatment procedures. The cyclic fatigue resistance of unused PDS 25/.08, PDL 25/.06, PDL 35/.05 and PDL 50/.01 instruments (n = 12) was evaluated in a stainless-steel device.

STATISTICAL ANALYSIS

 Data on the volumes of the root canals and the remaining filling materials were submitted to the paired t-test. Cyclic fatigue resistance data was submitted to one-way ANOVA and Tukey's tests (α = 0.05).

RESULTS

 Use of PDL 50/.01 decreased the remaining filling materials in the apical third (p < 0.05). The root canal volume was similar in the cervical and middle thirds before and after preparation using PDL 50/.01 (p > 0.05). PDL 50/.01 presented the highest cyclic fatigue resistance (p < 0.05).

CONCLUSIONS

 Use of the PDL 50/.01 instrument as an additional apical preparation for retreatment of curved root canals improved filling material removal in the apical third, while maintaining the dentin in the cervical and middle thirds. In addition, PDL 50/.01 presented high-flexural resistance.

Evaluation of apical extrusion and cone-beam computed tomography assessment of irrigant penetration in oval-shaped canals, using XP Endo Finisher and EndoActivator

Background:

Thorough cleaning of the pulp space is a challenging task. The mechanical instrumentation alone is usually not sufficient to completely debride the canals, and therefore, it requires the chemical action of irrigants also to disinfect the difficult to reach areas.

Aim:

The purpose of this study was to determine apical extrusion and assess irrigant penetration through cone-beam computed tomography (CBCT) for EndoActivator (EA) and XP Endo Finisher (XP).

Materials and Methods:

Sixty single-rooted mandibular premolars with oval-shaped canals were equally divided into three groups after instrumentation, based on the final irrigation: Group-1 syringe needle (30G Max-I-probe), Group-2 EA, and Group-3 XP. After the final irrigation, the weight of the extruded sodium hypochlorite was calculated. The prepared canals were then irrigated with a radiopaque contrast medium, which was activated according to the group of the sample (Group-1, 2, or 3). The volume of irrigant filled in the canal, especially in the apical third was determined through special tools in CBCT imaging.

Statistics:

One-way ANOVA test was used to compare the different groups.

Results and Conclusion:

Significantly more apical extrusion was seen in XP (P < 0.001). Both XP and EA have shown complete penetration of irrigant in the canal (100%).

Canal transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals: A micro-computed tomographic study

This study assessed the apical transportation using Mani GPR or HyFlex NT during the retreatment of curved root canals. Thirty-eight roots were analysed using micro-CT for the comparison of apical transportation produced by two retreatment systems. Longitudinal transportation, horizontal transportation, variation in the canal angle of curvature and variation in the canal/root width ratio were analysed. Longitudinal transportation was frequently observed, regardless of the system used. The canals retreated with Mani GPR showed a significantly higher horizontal transportation at 1 mm from the root apex (P < 0.01) and greater variation of the canal curvature angle (P < 0.01). The canal/root width ratio was similar between groups (P > 0.05). In conclusion, longitudinal transportation occurred more frequently in the mesial canal walls. Mani GPR showed greater horizontal transportation at 1 mm short of the apex, and higher variation of the canal curvature angle compared with HyFlex NT.

In vitro comparative evaluation of efficiency of XP-endo shaper, XP-endo finisher, and XP-endo finisher-R files in terms of residual root filling material, preservation of root dentin, and time during retreatment procedures in oval canals - A cone-beam computed tomography analysis

Background:

In an oval-shaped canal, no single instrumentation systems were effective in absolute removing obturation.

Aim:

The aim of the study was to evaluate the performance of ProTaper Universal Retreatment (PTUR) system, XP-endo Shaper (XPS), XP-endo Finisher (XPF), and XP-endo Finisher-R (XPF-R) in removing root-canal filling material and preservation of sound dentin during retreatment procedure.

Methodology:

Root-canal preparation was performed on 60 mandibular premolars with oval-shaped canals using the ProTaper Gold file system. Preobturation scans were performed to measure canal volume of the canal and recorded. Obturation was performed and the samples were randomly assigned into four groups according to the retreatment protocol used (n = 15): H-file, PTUR files, PTUR followed by XPF file, and XPS supplemented with XPF-R file. After retreatment, the specimens were re-scanned and volumetric analysis of remaining root filling material, volume of the canal space were measured using EZ-3Di Software Version 5.0.0.2. All the data were subjected to one-way ANOVA and post hoc Tukey's test with a significance of 5%.

Results:

XPS + XPF-R showed promising results in the removal of obturating material and preservation of root dentin than any other group. The difference is statistically significant.

Conclusion:

XPS + XPF-R removed gutta-percha more significantly without sacrificing the sound dentin along with instrumentation.

Supplementing filling material removal with XP-Endo Finisher R or R1-Clearsonic ultrasonic insert during retreatment of oval canals from contralateral teeth

This study compared the efficacy of XP-Endo Finisher R and R1-Clearsonic insert in removing filling material remnants from oval canals. Twelve pairs of contralateral premolars were treated and subsequently retreated with Reciproc 50. A supplementary procedure with XP-Endo Finisher R or R1-Clearsonic was performed. Micro-computed tomography was used to quantify the filling material volume in the full canal and apical segment lengths. Intragroup analyses revealed significant reduction of filling material after both procedures, not only in the full canal but also in the apical segment (P < 0.05). The amount of filling material removed with XP-Endo Finisher R and R1-Clearsonic was 47.9% and 52.2% in the apical segment (P > 0.05), and 82.1% and 64.6% in the full canal (P < 0.05). None of the instruments was effective in completely removing the filling material from the apical canal, but better results were obtained with XP-Endo Finisher R in the total canal length.

Comparison of the Self-Adjusting File and Hedström File Used as Supplementary Instruments for the Remaining Filling Material Removal During Retreatment of C-Shaped Canals: A Micro-CT Study

Objective:

The aim of this study was to evaluate the use of Self-adjusting file (SAF) system and Hedström (H) file for removing remaining filling material (RFM) from C-shaped canals.

Methods:

20 C-shaped mandibular second molars with C1 configurations were instrumented, filled with tagger´s hybrid technique. Samples were divided into 2 groups (n=10). Reciproc R25 and a Mtwo 35/04 file were used for retreatment in both groups. Then, a 2.0 SAF file (group I) and a #35 H file (group II) were used as supplementary steps for RFM removal. Micro-CT scanning was performed after every procedure. Total volumes were calculated and converted into percentages. Also, the minimum wall thickness at 3, 5, 7 mm from apex was calculated. The Prism 7.0 software was used as the analytical tool with a significance of 5%.

Results:

Initial obturation removal was approximately 64% in group I and 67% in Group II. The apical third had the highest values of RFM. The use of a H file significantly reduced the RFM compared to SAF in the total canal length respectively (30% vs 18%) and at 1-3 mm and 3-6 mm when compared to the use of SAF. A statistically significant decrease of RFM and minimum wall thickness were observed in both groups (P<0.05).

Conclusion:

None of the retreatment techniques completely removed RFM. The apical region was the more unaffected area. Also, the SAF file was less effective than the H file in removing the RFM. Although C-shaped canals possesses thinner dentinal wall thickness, no excessive dentine removal was observed after each instrument use.

Effect of Sonic Agitation of a Binary Mixture of Solvents on Filling Remnants Removal as an Alternative to Apical Enlargement-A Micro-CT Study

BACKGROUND

This work aimed to evaluate the efficacy of sonic agitation of a binary mixture of solvents (methyl ethyl ketone/tetrachloroethylene) on filling remnants removal and compare the effects of solvent agitation with the enlargement to the next instrument size.

METHODS

Twenty-four mandibular incisors were prepared with ProTaper Next (X1, X2) and obturated with the single-cone technique and AH Plus sealer. The teeth were retreated with ProTaper Universal Retreatment and ProTaper Next and divided into two groups (n = 12) according to the final instrument (X3 or X4). All canals were submitted to a supplementary procedure consisting of a mixture of solvents-methyl ethyl ketone/tetrachloroethylene, agitated with EndoActivator. The volume of filling remnants was assessed through micro-computed tomography in the apical 5 mm. Statistical analysis was performed with a significance level of 5%.

RESULTS

The supplementary procedure of agitation of the solvent mixture was beneficial in both groups (p < 0.05). There were no statistically significant differences between canals re-prepared until X4 and canals re-prepared until X3 plus solvent (p > 0.05).

CONCLUSIONS

An additional step with a two-solvent solution potentiated by EndoActivator showed to be very effective for the removal of gutta-percha and resinous sealer remnants from apical root canals of mandibular incisors, avoiding further enlargement.

Efficacy and Cytotoxicity of Binary Mixtures as Root Canal Filling Solvents

OBJECTIVES

This study reports the efficacy of two solvent mixtures on the dissolution of gutta-percha and AH Plus sealer, together with the cytotoxicity.

METHODS

Methyl ethyl ketone (MEK), orange oil, tetrachloroethylene, MEK/tetrachloroethylene (1:1), MEK/orange oil (1:1), and chloroform (control) were tested. Twelve groups (n = 15) of standardized stainless-steel molds filled with softened gutta-percha cones and twelve (n = 15) filled with AH Plus were immersed in the corresponding mixture or individual solvent, in an ultrasonic bath, for either 2 or 5 min. The effect of the solvents was assessed qualitatively by a topographical analysis (scanning electron microscopy) and chemical analysis (Fourier transform infrared spectroscopy), and quantitatively by a weight loss and viscoelastic property (dynamic mechanical analysis) evaluation. The cytotoxicity was assessed on MG63 human osteoblastic cells.

RESULTS

The mixtures did not show the formation of new compounds. Both presented significantly higher efficacies compared to their individual solvents, suggesting a synergistic effect. Their dissolution efficacy was similar to that of chloroform, showing high cytocompatibility.

CONCLUSIONS

The proposed strategy, incorporating ultrasound agitation and profiting from the synergy of adequate solvents, might enhance root canal cleanliness allowing a single-step procedure to dissolve gutta-percha and the sealer remnants, while assuring cytocompatibility with the periapical tissues.

The Efficacy of Rotary, Reciprocating, and Combined Non-Surgical Endodontic Retreatment Techniques in Removing a Carrier-Based Root Canal Filling Material from Straight Root Canal Systems: A Micro-Computed Tomography Analysis

The aim of this study is to analyze and compare the efficacy of three non-surgical endodontic retreatment techniques in removing a carrier-based root canal filling material from straight root canal systems. The study was performed on 99 single-rooted extracted teeth using the ProTaper Gold endodontic rotary system up to the F2 file (Dentsply Maillefer, Baillagues, Switzerland), which were sealed with GuttaCore (Dentsply Maillefer, Ballaigues, Switzerland) and AH plus epoxy resin sealer (Dentsply DeTrey, Konstanz, Germany) and randomly assigned to the following non-surgical retreatment techniques: ProTaper Retreatment endodontic rotary instruments (D1–D3 files, Dentsply Maillefer, Ballaigues, Switzerland; n = 33, PTR), Reciproc Blue endodontic reciprocating instrument (R50, VDW, Munich, Germany; n = 33, RCB50), and a combined root canal retreatment technique between Gates-Glidden drills (sizes #3 and #2, Dentsply Maillefer, Ballaigues, Switzerland) and Hedstrom files (file size 35, 30, and 25, Dentsply Maillefer, Ballaigues, Switzerland; n = 33; H-GG). All of the teeth were submitted twice to a micro-computed tomography (micro-CT) scan, before and after non-surgical endodontic retreatment procedures. The volume of root canal filling material (mm³), volume of remaining root canal filling material (mm³), non-surgical endodontic retreatment working time (min), proportion of remaining root canal filling material (%), and efficacy of root canal filling material removal between the non-surgical endodontic retreatment techniques were analyzed using ANOVA one-way statistical analysis. Statistically significant differences were observed between the proportions of remaining root canal filling material of PTR and H-GG (p = 0.018), between the non-surgical endodontic retreatment working times (min; p < 0.001), and between the efficacies of root canal filling material removal by the non-surgical endodontic retreatment techniques (p = 0.009). However, the non-surgical endodontic retreatment systems allow for similar carrier-based root canal filling material removal.

Retrograde Instrumentation of Surgically Resected Roots Using Controlled Memory Files: A Human Cadaver Study

INTRODUCTION

The purpose of this study is to evaluate the amount of residual obturation material of retroinstrumented surgically resected roots using controlled memory files and to evaluate the incidence of adverse treatment outcomes.

METHODS

Thirty maxillary anterior teeth in human cadavers were selected, and nonsurgical root canal treatment was performed on these teeth. A standardized 4-mm osteotomy and a 3-mm root resection with as close to 0° bevel as possible were made on each tooth. A microsurgical diamond tip was used to create a 1- to 2-mm starting point for each retropreparation. A 25/06 and 30/06 VTaper 2H were bent at about 90° angle to mimic the clinical and anatomic restrictions and used to create a retropreparation to a depth of 14 mm. Micro-computed tomography scans were taken and analyzed for volume and percentage of residual obturation material at 5 and 10 mm. In addition, the incidences of instrument separation and crack and ledge formation in the teeth were recorded.

RESULTS

The median volume of residual obturation at 5 and 10 mm was 0.18 mm³ (interquartile range, 0.36 mm³) and 1.97 mm³ (interquartile range, 1.99 mm³), respectively. The overall incidence of file separation during retropreparation was 13.33% (4/30). Among the cases analyzed with micro-computed tomography, none showed crack or ledge formation.

CONCLUSIONS

Retroinstrumentation of surgically resected roots using controlled memory files cleans the canal effectively with relatively low adverse treatment outcomes. Although this novel technique is limited in application, it is a safe and effective way to achieve a deep, clean retropreparation.

Evaluation of Passive Ultrasonic Irrigation and GentleWave System as Adjuvants in Endodontic Retreatment

INTRODUCTION

Nonsurgical endodontic retreatment continues to be a challenge in endodontics, particularly when dealing with a complex tooth anatomy. This study evaluated the efficacy of passive ultrasonic irrigation (PUI) and the GentleWave system as supplementary techniques to remove remaining filling materials from oval-shaped root canals.

METHODS

Twenty distal roots of human mandibular molars with single and oval-shaped canals were shaped with R40 (40.06) instrument and filled with gutta-percha and AH Plus sealer using warm vertical obturation. Initial filling material removal was performed with R50 (50.05) instrument, followed by the use of PUI (n = 10) or GentleWave system (n = 10). Micro-computed tomographic images were obtained after obturation, initial material removal, and after the use of PUI and GentleWave. The volume of remaining filling material was calculated for the entire canal as well as for the coronal, middle, and apical thirds. Statistical analyses were performed by using analysis of variance, Kruskal-Wallis and Mann-Whitney tests. P ≤ .05 was considered significant.

RESULTS

The use of PUI and GentleWave as supplementary techniques significantly reduced the volume of remaining filling material after initial instrumentation (P < .05). However, none of these techniques was able to render canals free from filling materials. PUI showed better performance by removing 18% of the remaining filling material, whereas the GentleWave system was able to remove approximately 10% (P = .02).

CONCLUSIONS

The use of supplementary techniques optimized filling material removal after initial instrumentation. PUI enhanced the overall cleaning of the root canal system during endodontic retreatment in oval-shaped canals.

Retreatability of BC Sealer and AH Plus root canal sealers using new supplementary instrumentation protocol during non-surgical endodontic retreatment

OBJECTIVE

The aim of this study was to evaluate the efficacy of supplementary techniques (ultrasonic tip/XP-endo Finisher R) in removing remaining filling materials (gutta-percha/AHPlus/BCSealer) from oval-shaped root canals during non-surgical endodontic retreatment.

MATERIAL AND METHODS

Twenty-eight distal roots of human mandibular molars with single and oval-shaped canals were initially shaped with a R40 instrument and filled with gutta-percha points and AH Plus (n = 14) or BC Sealer (n = 14) followed by an initial micro-CT scanning. Initial filling material removal was performed in all 28 samples with an R50 instrument, and all samples submitted to a second micro-CT. Supplementary techniques with ultrasonic tips or XP-endo Finisher R instruments were performed in each sealer group, and all samples submitted to a third micro-CT. The volume of remaining filling material was calculated for the entire canal as well as for the coronal, middle, and apical thirds. Statistical analyses were performed using T, ANOVA 3-way, and Tukey tests.

RESULTS

Lower values of remnant filling material were found for BC Sealer (16.06 ± 14.34) compared to AH Plus (28.30 ± 10.54) (P < 0.001), and considering the supplementary technique, lower values of remnant filling material were found for the ultrasonic tip (18.95 ± 11.05) compared to XP-endo Finisher R (25.41 ± 15.81) (P = 0.025). Ultrasonic instruments significantly reduced the percentage of remaining filling material for both AH Plus (P = 0.04) and BC Sealer (P = 0.02) while XP-endo Finisher R was effective for AHPlus only (P = 0.04). The remaining filling material was observed in all samples regardless the filling material or the supplementary technique employed.

CONCLUSIONS

Supplementary techniques increased filling material removal; however, none of them was able to render root canals completely free from root fillings. Ultrasonic tips should be considered a good option for endodontic retreatment, especially for bioceramic cases.

CLINICAL RELEVANCE

Supplementary instrumentation techniques are effective tools to reduce the amount of filling materials during root canal retreatment.

Age-dependent root canal instrumentation techniques: a comprehensive narrative review

The aim of this article was to review age-dependent clinical recommendations for appropriate root canal instrumentation techniques. A comprehensive narrative review of canal morphology, the structural characteristics of dentin, and endodontic outcomes at different ages was undertaken instead of a systematic review. An electronic literature search was carried out, including the Medline (Ovid), PubMed, and Web of Science databases. The searches used controlled vocabulary and free-text terms, as follows: 'age-related root canal treatment,' 'age-related instrumentation,' 'age-related chemo-mechanical preparation,' 'age-related endodontic clinical recommendations,' 'root canal instrumentation at different ages,' 'geriatric root canal treatment,' and 'pediatric root canal treatment.' Due to the lack of literature with practical age-based clinical recommendations for an appropriate root canal instrumentation technique, a narrative review was conducted to suggest a clinical algorithm for choosing the most appropriate instrumentation technique during root canal treatment. Based on the evidence found through the narrative review, an age-related clinical algorithm for choosing appropriate instrumentation during root canal treatment was proposed. Age affects the morphology of the root canal system and the structural characteristics of dentin. The clinician's awareness of root canal morphology and dentin characteristics can influence the choice of instruments for root canal treatment.