Elucidation of photocatalysis, photoluminescence and antibacterial studies of ZnO thin films by spin coating method

Bougainvillea glabra-mediated synthesis of Zr₃O and chitosan-coated zirconium oxide nanoparticles: Multifunctional antibacterial and anticancer agents with enhanced biocompatibility

The effectiveness and safety of nanomaterials (NMs) are essential for their use in healthcare. This study focuses on creating NPs with multifunctional antibacterial and anticancer properties to combat bacterial infections and cancer disease more effectively than traditional antibiotics. This study investigates the synthesis of Zr3O and chitosan (ch) coated zirconium oxide nanoparticles (chZrO NPs) using Bougainvillea glabra (B. glabra) plant extract through a green, one-pot precipitation method. The synthesized NPs were analyzed using various techniques. Their antibacterial properties are attributed to the production of reactive oxygen species (ROS), influenced by their size, large surface area, oxygen vacancies, ion release, and diffusion capabilities. The chZrO NPs showed superior antibacterial activity compared to Zr3O and chitosan alone, with effective inhibition against both Gram-positive bacteria (S. aureus and B. subtilis) and Gram-negative bacteria (E. coli and P. aeruginosa). Additionally, anticancer studies of chZrO NPs demonstrated significant activity against colon cancer HCT116 cells with C50 values of 4.98 μg/mL compared to chitosan and Zr3O with 9.62, 6.69 μg/mL, while biocompatibility tests on L929 cells confirmed their safety showing 93 % cell viability compared to ch and Zr3O. These findings suggest that chZrO NPs are promising candidates for future use in clinical and healthcare applications.

A review of recent progress in alginate-based nanocomposite materials for tissue engineering applications

Integrating nanotechnology with tissue engineering has revolutionized biomedical sciences, enabling the development of advanced therapeutic strategies. Tissue engineering applications widely utilize alginate due to its biocompatibility, mild gelation conditions, and ease of modification. Combining different nanomaterials with alginate matrices enhances the resulting nanocomposites' physicochemical properties, such as mechanical, electrical, and biological properties, as well as their surface area-to-volume ratio, offering significant potential for tissue engineering applications. This review thoroughly overviews various nanomaterials, such as metal and metal oxide nanoparticles, carbon-based nanomaterials, MXenes, and hydroxyapatite, that modify alginate-based nanocomposites. It covers multiple preparation techniques, including layer-by-layer assembly, blending, 3D printing, and in situ synthesis. These techniques apply to tissue engineering applications, including bone tissue engineering, cardiac tissue engineering, neural tissue engineering, wound healing, and skin regeneration. Additionally, it highlights current advancements, challenges, and future perspectives.

Carica Papaya leaf-infused metal oxide nanocomposite: a green approach towards water treatment and antibacterial applications

This study successfully synthesized ZnO-CuO nanocomposite using the hydrothermal method with Carica papaya leaf extract. The incorporation of the leaf extract significantly enhanced the nanocomposite properties, a novel approach in scientific research. Characterization techniques, including X-ray diffraction, Fourier Transmission Infrared spectroscopy, and Scanning Electron Microscopy with Energy Dispersive X-Ray Analysis, confirmed a cubic crystal structure with an average size of 22.37 nm. The Fourier Transmission Infrared spectrum revealed distinctive vibrations at 627, 661, and 751 cm-1 corresponding to ZnO-CuO nanocomposite corresponding to stretching and vibration modes. SEM images confirmed a cubic-like and irregular structure. The nanocomposite exhibited outstanding photocatalytic activity, degrading methylene blue dye by 96.73% within 120 min under visible light. Additionally, they showed significant antimicrobial activity, inhibiting Staphylococcus aureus (20 mm) and Klebsiella pneumonia (17 mm). The results highlight the efficiency of Carica papaya leaf-derived ZnO-CuO nanocomposite for environmental and health challenges.

Amplifying bactericidal activity: Surfactant-mediated AgBr thin film coating over two-dimensional vertically aligned ZnO nanorods for dark-light dual mode disinfection

Thin film coatings with potent antibacterial properties find critical applications in diverse domains such as medical devices, frequently touched surfaces, and food packaging for combating microbial proliferation across diverse scenarios. Two-dimensional photocatalytic antimicrobial coatings, offering a substantial actual-to-apparent surface ratio, hold immense potential for achieving this objective. However, realizing antibacterial performance not just under light but also in dark conditions remains a challenge. To address this, we present AgBr-coated vertically aligned ZnO nanorods (NRs) thin film architecture, employing a unique surfactant-mediated solution-phase spin-coating approach for achieving uniform deposition of AgBr onto ZnO NRs. The resulting ZnO NRs/AgBr heterojunction architectures have been characterized for their microstructural, morphological, elemental, optical, and wettability attributes. The studies have ascertained the tunability of AgBr content by modulating the concentration of its surfactant-based precursor solution. Further, valence band (VB) analyses revealed an increase in the electron density near to the VB edge. The dual role of AgBr as an antimicrobial agent and a photosensitizer, effectively enhancing the visible-light photodisinfection efficacy of ZnO NRs, has been evident through the dark-light dual mode antibacterial studies. Electron paramagnetic resonance measurements have shown hydroxyl radicals being majorly responsible for the visible-light photodisinfection performance. Encouragingly, reusability assessments showcase significant promise, while artificial sweat-wiping studies on the structures unveil heightened photodisinfection efficacy. This enhancement could be attributed to components like urea and lactic acid, speculated to augment the photocatalytic efficiency by minimizing charge recombination.

Recent advances in the production of bionanomaterials for development of sustainable food packaging: A comprehensive review

Polymers originating from natural macromolecule based polymeric materials have gained popularity due to the demand for green resources to develop unique, eco-friendly, and high-quality biopolymers. The objective of this review is to address the utilization of bionanomaterials to improve food quality, safety, security, and shelf life. Bionanomaterials are synthesized by integrating biological molecules with synthetic materials at the nanoscale. Nanostructured materials derived from biopolymers such as cellulose, chitin, or collagen can be employed for the development of sustainable food packaging. Green materials are cost-effective, biocompatible, biodegradable, and renewable. The interaction of nanoparticles with biological macromolecules must be analyzed to determine the properties of the packaging film. The nanoparticles control the growth of bacteria that cause food spoiling by releasing distinctive chemicals. Bio-nanocomposites and nanoencapsulation systems have been used in antimicrobial bio-based packaging solutions to improve the efficiency of synergism. Nanomaterials can regulate gas and moisture permeability, screen UV radiation, and limit microbial contamination, keeping the freshness and flavor of the food. Food packaging based on nanoparticles embedded biopolymers can alleviate environmental concerns by lowering the amount of packaging materials required and enhancing packaging recyclability. This results in less waste and a more eco-sustainable approach to food packaging. The study on current advances in the production of bionanomaterials for development of sustainable food packaging involves a detailed investigation of the available data from existing literature, as well as the compilation and analysis of relevant research results using statistical approaches.

Effect of metal doping and non-metal loading on light energy driven degradation of organic dye using ZnO nanocatalysts

Photocatalytic degradation of azo dyes is seen as a viable technique for addressing environmental and energy concerns simultaneously. Therefore, the primary requirement is the creation of a better catalyst with adequate product selectivity for removal efficiency under solar light. Herein, pure ZnO and Cu (0.10 M) doped cotton stalk activated carbons with ZnO (Cu-doped ZnO/CSAC) were produced, and these are labelled as CZ1, CZ2, CZ3, and CZ3/CSAC, respectively. The optoelectronic and photodegradation efficiencies were examined regarding the impact of doping and loading samples. The XRD patterns confirmed that the CZ3/CSAC sample exhibited a hexagonal wurtzite structure. The XPS survey confirmed that Cu ions were incorporated into the ZnO lattice in a Cu²⁺ oxidation state. The band gap value (CZ3/CSAC) was reduced (2.38 eV) compared to pure ZnO and CZ3. Moreover, PL and EIS analysis proved more efficient at separating photoinduced charged carriers for CZ3/CSAC than all other samples. The CZ3/CSAC sample showed improved photocatalytic degradation efficiency (93.09%) compared to the pure ZnO and CZ3 samples using brilliant green (BG) dye under sunlight irradiation.

Various Applications of ZnO Thin Films Obtained by Chemical Routes in the Last Decade

This review addresses the importance of Zn for obtaining multifunctional materials with interesting properties by following certain preparation strategies: choosing the appropriate synthesis route, doping and co-doping of ZnO films to achieve conductive oxide materials with p- or n-type conductivity, and finally adding polymers in the oxide systems for piezoelectricity enhancement. We mainly followed the results of studies of the last ten years through chemical routes, especially by sol-gel and hydrothermal synthesis. Zinc is an essential element that has a special importance for developing multifunctional materials with various applications. ZnO can be used for the deposition of thin films or for obtaining mixed layers by combining ZnO with other oxides (ZnO-SnO2, ZnO-CuO). Also, composite films can be achieved by mixing ZnO with polymers. It can be doped with metals (Li, Na, Mg, Al) or non-metals (B, N, P). Zn is easily incorporated in a matrix and therefore it can be used as a dopant for other oxidic materials, such as: ITO, CuO, BiFeO3, and NiO. ZnO can be very useful as a seed layer, for good adherence of the main layer to the substrate, generating nucleation sites for nanowires growth. Thanks to its interesting properties, ZnO is a material with multiple applications in various fields: sensing technology, piezoelectric devices, transparent conductive oxides, solar cells, and photoluminescence applications. Its versatility is the main message of this review.

Investigattions on ZnO Thin Films Modified with Urea: An Approach as Ammonia Sensor

Pure and urea-modified zinc oxide thin films are prepared using the spray pyrolysis technique on microscopic glass substrates. We have added different urea concentrations as a modifier to the zinc acetate precursor for obtaining urea-modified ZnO thin films and investigated the effect of the urea concentration on the structural, morphological, optical, and gas-sensing properties. The gas-sensing characterization of pure and urea-modified ZnO thin films is tested in the static liquid distribution technique with 25 ppm of ammonia gas at an operating temperature of 27 °C. The prepared film with a concentration of 2 wt % of urea has shown the best sensing properties toward ammonia vapors due to more active sites for the reaction between chemi-absorbed oxygen and the target vapors.

Effect of Al Incorporation on the Structural and Optical Properties of Sol-Gel AZO Thin Films

ZnO and Al-doped ZnO (AZO) thin films were prepared using the sol-gel method and deposited on a Silicon (Si(100)) substrate using the dipping technique. The structure, morphology, thickness, optical constants in the spectral range 300-1700 nm, bandgap (E_g) and photoluminescence (PL) properties of the films were analyzed using X-ray diffractometry (XRD), X-ray fluorescence (XRF), atomic force microscopy (AFM), scanning electron microscopy (SEM), spectroscopic ellipsometry (SE), Raman analysis and PL spectroscopy. The results of the structure and morphology analyses showed that the thin films are polycrystalline with a hexagonal wurtzite structure, as well as continuous and homogeneous. The PL background and broader peaks observable in the Raman spectra of the AZO film and the slight increase in the optical band gap of the AZO thin film, compared to undoped ZnO, highlight the effect of defects introduced into the ZnO lattice and an increase in the charge carrier density in the AZO film. The PL emission spectra of the AZO thin film showed a strong UV line corresponding to near-band-edge ZnO emission along with weak green and red emission bands due to deep-level defects, attributed to the oxygen-occupied zinc vacancies (O_Zn lattice defects).

Locust bean gum/carboxycellulose nanocrystal coating incorporating ZnO clusters built by the accretion of micro spindles or sheets for strawberries preservation

Two shapes of ZnO clusters constructed by the growth of spindle-like (I-ZnO) and sheet-like (II-ZnO) microparticles added to Locust bean gum/carboxycellulose nanocrystal (LBG/C-CNC) coating for improving properties as the enhancers and antibacterial agents. Subsequently, active LBG/C-CNC/ZnO (LCZ) coatings were evaluated to combat the fruits rot triggered by microorganisms aiming to extend their shelf life. The results showed that II-ZnO clusters with flower-shape enhanced the properties more obviously due to more interaction sites. The oxygen and water vapor permeability of the coating containing 5 % II-ZnO (LCZII-5) decreased from 2.00 and 5.98 × 10^-11 to 0.6 cm³ mm m^-2 day^-1 atm^-1 and 1.85 × 10^-11 g m^-1 s^-1 Pa^-1, respectively. And the antibacterial rate against E. coli and S. aureus could reach more than 75 %. Meanwhile, the tensile strength (TS) increased by 50.95 %. The inhibition rates on strawberries of weight and Vc loss by LCZII-5 coating were 30.64 % and 53.59 %, respectively. More importantly, the coatings could be easily washed off with water in spite of tightly being connected with the surface of the strawberries. As was expected, this study provides a feasible method for preparing novel fruit coatings with an effective preservation.

Cytotoxicity and Antibacterial Activity of Mineral Trioxide Aggregate Cement with Radiopacity Introduced by ZrO2

The article presents the results of in vitro studies on cytotoxicity and antibacterial activity of new MTA-type cements, developed on the basis of the sintered tricalcium silicate enriched with ZnO, along with an agent introducing the radiopacity in the form of ZrO₂. The new materials have been developed to ensure that their physical and chemical properties are suited for endodontic applications. The cements were evaluated via characterisation of setting time, compressive strength, as well as translucency on X-ray images, and bioactivity in the simulated body fluid (SBF). The μCT was used to test the influence of the ZrO₂ grains in the powder component on the microstructure of the produced cement. Then, the cytotoxic action of the cements was evaluated by applying a reference L-929 cell line. The conditions of the culture upon contact with the tested materials or with extracts from the cements were assessed using image analysis or an MTT colorimetric assay. Two strains of streptococci, Streptococcus mutans and Streptococcus sanguinis, were used to study the antibacterial activity of the tested cements with ZrO₂ acting as the agent introducing the radiopacity. The new cements are characterised by appropriate properties as far as retrograde root canal filling is concerned.

A Room-Temperature Surface Acoustic Wave Ammonia Sensor Based on rGO/DPP2T-TT Composite Films

Surface acoustic wave (SAW) sensors based on reduced graphene oxide/poly (diketopyrrolopyrrolethiophene-thieno [3,2-b]thiophene-thiophene) (rGO/DPP2T-TT) composite sensing films for the detection of ammonia were investigated at room temperature in this study. The rGO/DPP2T-TT composite films were deposited onto ST-X quartz SAW resonators by a drop-casting method. FESEM, EDS, and XRD characterizations showed that the rGO/DPP2T-TT composite film was successfully synthesized and exhibited numerous wrinkles and a rough structure, which are crucial for gas adsorption. The frequency response to 500-1400 ppb ammonia shown by the prepared SAW sensor coated with rGO/DPP2T-TT composite film increased linearly as the ammonia concentration increased. The sensor based on a rGO/DPP2T-TT composite film exhibited a positive frequency shift of 55 Hz/ppm, and its frequency response to 500 ppb ammonia was 35 Hz. The sensors thus show promising potential in detecting sub-ppm concentration levels of NH₃ at room temperature, which opens up possibilities for applications in the noninvasive detection of NH₃ in the breath. As a result, the rGO/DPP2T-TT composite sensor can be a good candidate for in situ medical diagnosis and indoor/outdoor environment monitoring.

Brassica oleracea L. (Acephala Group) based zinc oxide nanoparticles and their efficacy as antibacterial agent

Zinc oxide nanoparticles were synthesized from the leaf extract of Brassica oleracea L. Acephala group (collard green) followed by their characterization using Scanning Electron Microscope (SEM), and Energy Dispersive X-ray (EDX). The antibacterial properties of zinc nanoparticles were tested against Gram-negative bacteria, Pseudomonas aeruginosa (ATCC ® 9027™), Escherichia coli (ATCC ® 8739™), Klebsiella pneumoniae (ATCC® BAA-1705™) and Gram-positive bacteria, Staphylococcus aureus (ATCC ® 6538™) and Listeria monocytogenes (ATCC ® 13932™), at four different concentrations (50.00 µg/ml, 100.00 µg/ml, 500.00 µg/ml and 1 mg/ml) of zinc oxide nanoparticles suspension. Results revealed that the synthesized nanoparticles exhibit strong antibacterial effects against Pseudomonas aeruginosa, Listeria monocytogenes, Klebsiella pneumonia, Staphylococcus aureus and Escherichia coli at 500.00 µg/ml-1 mg/ml concentrations. An increase in efficacy of nanoparticles with the decrease of their size was also evident. This is a first ever report on Brassica oleracea, L. based nanoparticles which demonstrates that 500.00 µg-1 mg/ml conc. of zinc oxide nanoparticles have antibacterial activity against both Gram -ve and Gram +ve bacteria and have the potential to be considered as an antibacterial agent in future.

Hydrophilic ZnO thin films doped with ytterbium and europium oxide

Hydrophilic photocatalytically active ZnO and ZnO thin films doped with Yb₂O₃ and Eu₂O₃ (rare earth metal oxide, REM) with optical transmittance exceeding 76% in the visible light range (λ = 550 nm) were prepared by a combination of sol-gel technique, spin-coating and high temperature thermal treatment at 500 and 600 °C. The thin films were tested using advanced research methods, i.e.: morphology and topography and fractures along with approximate thickness values were investigated on scanning electron microscope (SEM), chemical composition was determined using X-ray Energy Dispersive Spectroscopy (X-ray Energy Spectroscopy), topography and roughness were measured on atomic force microscope (AFM), water contact angle values were determined by sitting water droplet method, optical properties of the fabricated materials were investigated using UV/Vis spectrophotometer. The decolorization efficiency of rhodamine B in aqueous solution was analyzed over a period of 190 min, obtaining degradation rates of: 54.7% and 43.1%, for ZnO and ZnO coatings doped with ytterbium oxide and europium oxide, respectively. The roughness of thin hybrid coatings did not exceed 50 nm, ensuring effective absorption of electromagnetic radiation by the layers. The methodology presented by the authors for the fabrication of thin hybrid films characterized by the key properties of self-cleaning coatings can be successfully applied to coatings of photovoltaic panels and architectural glass structures.

Effect of thickness and reaction media on properties of ZnO thin films by SILAR

Zinc oxide (ZnO) is one of the most promising metal oxide semiconductor materials, particularly for optical and gas sensing applications. The influence of thickness and solvent on various features of ZnO thin films deposited at ambient temperature and barometric pressure by the sequential ionic layer adsorption and reaction method (SILAR) was carefully studied in this work. Ethanol and distilled water (DW) were alternatively used as a solvent for preparation of ZnO precursor solution. Superficial morphology, crystallite structure, optical and electrical characteristics of the thin films of various thickness are examined applying X-ray diffraction (XRD) system, scanning electron microscopy, the atomic force microscopy, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, photoluminescence spectroscopy, Hall effect measurement analysis and UV response study. XRD analysis confirmed that thin films fabricated using ethanol or DW precursor solvents are hexagonal wurtzite ZnO with a preferred growth orientation (002). Furthermore, it was found that thin films made using ethanol are as highly crystalline as thin films made using DW. ZnO thin films prepared using aqueous solutions possess high optical band gaps. However, films prepared with ethanol solvent have low resistivity (10^-2 Ω cm) and high electron mobility (750 cm²/Vs). The ethanol solvent-based SILAR method opens opportunities to synthase high quality ZnO thin films for various potential applications.

Impact of novel deflocculant ZnO/Chitosan nanocomposite film in disperser pretreatment enhancing energy efficient anaerobic digestion: Parameter assessment and cost exploration

This paper proposed to interpret the novel method of extracellular polymeric substance (EPS) removal in advance to sludge disintegration to enrich bioenergy generation. The sludge has been subjected to deflocculation using Zinc oxide/Chitosan nanocomposite film (ZCNF) and achieved 98.97% of solubilization which enhance the solubilization of organics. The obtained result revealed that higher solubilization efficiency of 23.3% was attained at an optimal specific energy of 2186 kJ/kg TS and disintegration duration of 30 min. The deflocculated sludge showed 8.2% higher solubilization than the flocculated sludge emancipates organics in the form of 1.64 g/L of SCOD thereby enhancing the methane generation. The deflocculated sludge produces methane of 230 mL/g COD attained overall solid reduction of 55.5% however, flocculated and control sludge produces only 182.25 mL/g COD and 142.8 mL/g COD of methane. Based on the energy, mass and cost analysis, the deflocculated sludge saved 94.1% of energy than the control and obtained the net cost of 5.59 $/t which is comparatively higher than the flocculated and control sludge.

Fabrication of Cu2MoS4 decorated WO3 nano heterojunction embedded on chitosan: Robust photocatalytic efficiency, antibacterial performance, and bacteria detection by peroxidase activity

In this study, the Cu2MoS4/WO3 supported on chitosan was prepared by precipitation method, and applied to photocatalyst, antibacterial agent and biosensor. The presence of WO3 and Cu2MoS4 crystals were confirmed by XRD analysis. The elemental information was investigated by EDS. FTIR spectra shows the presence of chitosan in nanocomposites. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites has a bandgap of 2.18 eV and it is effective for visible light condition. The average particle size of the Cu2MoS4/WO3/Chitosan is 71 nm. The photocatalysis activity Cu2MoS4/WO3/Chitosan was higher than Cu2MoS4 or WO3.The Cu2MoS4/WO3/Chitosan nanocomposites shows the highest efficiency (100%) in photocatalysis degradation of dye under visible light irradiation in 80 min. The •O2- plays a main role in degradation process. The as-synthesized Cu2MoS4/WO3/Chitosan nanocomposites depicted the antibacterial activity toward G+/- bacteria. Determination of enterococcus faecalis is important for human health. The DNA template was used to the Cu2MoS4/WO3/Chitosan nanocomposites and applied in detection of enterococcus faecalis by H2O2 and 3,3',5,5' -tetramethylbenzidine in peroxidase like activity. The detection limit of enterococcus faecalis by DNA-Cu2MoS4/WO3/Chitosan in peroxidase-like catalysis was about 55 CFU/mL. Therefore, the Cu2MoS4/WO3/Chitosan can be applied in the photocatalysis, bactericidal and peroxidase process.

A superfine glass fibre air filter with rapid response to photocatalytic antibacterial properties under visible light by loading rGO/ZnO

The development of high-performance air filter has become more and more important to public health. However, it has always been very challenging for developing a multifunctional air filter to simultaneously achieve excellent filtration and antibacterial properties. Herein, a versatile air filter was prepared with loading the reduced graphene (rGO) and zinc oxide on the superfine glass fibre (s-GF) with the three-dimensional network structure by in situ sol-gel process followed by calcination, which aims to achieve synergistic high-efficiency air filtration and rapid response to photocatalytic antibacterial properties under visible light. The air filter showed a three-dimensional network structure based on a rGO/ZnO/s-GF multilayer and exhibited the highest catalytic performance by achieving a 95% degradation effect on rhodamine B within 2 h and achieving 100% antibacterial inactivation of the Escherichia coli and Staphylococcus aureus within 4 h under visible light when the weight ratio of rGO in rGO/ZnO is 1.6%. The air filtration efficiency can also be maintained at 99% after loading ZnO and rGO photocatalytic particles. The spectrum of the photoluminescence (PL), UV-Vis diffuse reflectance spectra (DRS) and electron spin resonance (ESR) indicate that the combination of rGO and ZnO on the s-GF can increase the separation of photogenerated carriers and the specific surface area of the air filter, thereby increasing the photocatalytic response and antibacterial properties of the s-GF air filter under visible light in a short time.

Elucidating the structural, anticancer, and antibacterial traits of Punica granatum peel extracts-mediated Ag and Ag/GO nanocomposites

Ag nanoparticles and Ag/GO nanocomposites have been synthesized by facile, eco-friendly, and cost-effective green approach using the peel extracts of Punica granatum. The synthesized Silver Nanoparticles and Silver Graphene Oxide nanocomposites were characterized by UV-visible spectroscopy, X-ray diffraction, transmission electron microscopy, and Fourier transform infrared analysis. AgNPs revealed spherical morphology with particle size ranging from 30 to 40 nm. Scanning electron microscopy results revealed silver nanoparticles with an average size of 35 nm being uniformly distributed over GO sheets. The surface plasmon band appears at 433 nm for AgNPs and 458 nm for Ag/GO nanocomposites. The green synthesized nanoparticles were found to have excellent antibacterial efficacy against both gram positive (Staphylococcus aureus, Bacillus subtilis) and gram negative (Klebsiella pneumoniae, Escherichia coli) bacterial strains. The results showed that Ag/GO nanocomposites showed better antibacterial activity than pure AgNPs with maximum inhibitory zone of 28 mm for Escherichia coli. This attributes to the role of GO sheets in preventing AgNPs from agglomerating and oxidizing. The anticancer activity of AgNPs and Ag/GO nanocomposites were tested against human breast cancer cell line (MCF-7) which demonstrated a dose dependent activity with half minimum inhibitory concentration of 100 and 150 μg/ml.

Synthesis of a novel ternary (g-C3N4 nanosheets loaded with Mo doped ZnOnanoparticles) nanocomposite for superior photocatalytic and antibacterial applications

This article reports the synthesis of a novel ternary Visible-Light-Driven (VLD) photocatalyst and antibacterial agent. The two-dimensional graphitic carbon nitride nanosheets (g-C₃N₄ NSs) and 7% molybdenum doped zinc oxide nanoparticles (Mo doped ZnO NPs) were used for the synthesis of the 65% g-C₃N₄ hybridized with 7% Mo doped ZnO novel ternary nanocomposite (Mo doped ZnO/g-C₃N₄ ternary NC). The synthesis process, as well as the structures, morphologies, photocatalytic and antibacterial properties of the synthesized ternary NC and constituents, were investigated by using several spectroscopic and microscopic techniques. It was revealed through the Transmission Electron Microscopy (TEM) characterization of the synthesized NC that the Mo doped ZnO NPs were found uniformly embedded upon the well-stacked g-C₃N₄NSs. It was further discovered by the bandgap analysis that the light absorbance ability of the ternary NC exists in the visible region of the light spectrum. The photocatalytic degradation of the methylene blue (MB) by the use of novel ternary NC in an aqueous medium was analyzed while using Ultra Violet-Visible (UV-Visible) spectroscopy. Trapping experiments of active species during the photodegradation and Electron Spin Resonance (ESR) experiment revealed that the superoxide and hydroxyl radicals were the leading species liable for MB deterioration. The ternary NC exhibited superior photocatalytic performance as compared with binary doped or hybridized nanomaterials (NMs) and mono photocatalysts due to the facility of effective migration and separation of the charge carriers across the (Mo doped ZnO NPs)/g-C₃N₄ NSs interface of the heterojunction. The increased generation of the reactive oxygen species (ROS), O^2-, and ^•OH radicals the photogenerated charge carriers within the Mo doped ZnO/g-C₃N₄ NC were found responsible for its enhanced antibacterial performance.

Review of the Applications of Biomedical Compositions Containing Hydroxyapatite and Collagen Modified by Bioactive Components

Regenerative medicine is becoming a rapidly evolving technique in today's biomedical progress scenario. Scientists around the world suggest the use of naturally synthesized biomaterials to repair and heal damaged cells. Hydroxyapatite (HAp) has the potential to replace drugs in biomedical engineering and regenerative drugs. HAp is easily biodegradable, biocompatible, and correlated with macromolecules, which facilitates their incorporation into inorganic materials. This review article provides extensive knowledge on HAp and collagen-containing compositions modified with drugs, bioactive components, metals, and selected nanoparticles. Such compositions consisting of HAp and collagen modified with various additives are used in a variety of biomedical applications such as bone tissue engineering, vascular transplantation, cartilage, and other implantable biomedical devices.

Zinc sulfide quantum dots/zinc oxide nanospheres/bismuth-enriched bismuth oxyiodides as Z-scheme/type-II tandem heterojunctions for an efficient charge separation and boost solar-driven photocatalytic performance

A novel zinc sulfide quantum dot (ZnS QD)/zinc oxide (ZnO) nanosphere/bismuth-enriched bismuth oxyiodide (Bi₄O₅I₂) tandem heterojunction photocatalyst is fabricated through two-step solvothermal, calcination and one-step hydrothermal strategies. The successfully constructed core-shell nanostructure can increase the interface area and the active sites of the composite photocatalysts. The formation of a Z-scheme/Type-II tandem heterojunction favors the transfer and spatial separation of charge carriers, in which Bi₄O₅I₂ plays a bridging role to connect ZnO and ZnS. Simultaneously, the participation of Bi₄O₅I₂ significantly shortens the band gap of the composite photocatalyst. This dual functional ZnO@Bi₄O₅I₂/ZnS composite photocatalyst has a high photocatalytic hydrogen evolution rate of 578.4 µmol g^-1h^-1 and an excellent photocatalytic degradation efficiency for bisphenol A (BPA) and 2,4,5-trichlorophenol (TCP). In addition, cycling tests show that ZnO@Bi₄O₅I₂/ZnS has a high stability, which is favorable for practical applications. This novel ZnO@Bi₄O₅I₂/ZnS Z-scheme/Type-II tandem heterojunction photocatalyst will provide new ideas for the multichannel charge transfer of other highly efficient heterojunction photocatalysts.

Synthesis of Poly(vinyl alcohol)-Aided ZnO/Mn2O3 Nanocomposites for Acid Orange-8 Dye Degradation: Mechanism and Antibacterial Activity

Zinc oxide is one of the novel metal oxides utilized for diverse applications. The sol-gel and unintended self-propagation procedures were applied to synthesize the porous and high surface area ZnO-based metal oxide nanocomposite. The p-type manganese(III) oxide was successfully coupled with n-type ZnO. The physical property characterization results revealed the surface area, porosity, and charge transfer capability improvement on the poly(vinyl alcohol) (PVA)-aided binary nanocomposite (PVA-ZnO/Mn2O3), compared to ZnO. The XRD patterns and TEM image analysis validated the nanometer size range for the materials (15-60 nm). The SEM micrographs and BET spectral details have confirmed the porous nature of the PVA-ZnO/Mn2O3 nanocomposite. The supporting results were obtained from the HRTEM (IFFT) and SAED pattern analyses. The EDX and HRTEM analyses were used for the confirmation of elemental composition and reality of the PVA-ZnO/Mn2O3 composite, respectively. The presence of the improved charge transfer property for PVA-ZnO/Mn2O3, compared to ZnO, was evidenced from acid orange-8 dye degradation. The highest zone of inhibition (14 mm) was recorded on Escherichia coli bacteria for the uncalcined PVA-ZnO/Mn2O3 nanocomposite compared to PVA, yet, less zone of inhibition compared to the calcined PVA-ZnO/Mn2O3 nanocomposite. The authors recommend the formation of the couple between metal oxides by electrochemical technique analyses as a future work.

Fabrication of silver phosphate-ilmenite nanocomposites supported on glycol chitosan for visible light-driven degradation, and antimicrobial activities

Recently, photo-degradation process under ultraviolet-light irradiation is being used as a substantial treatment method for the removal of environmental pollution. In this study, a silver phosphate-ilmenite (Ag₃PO₄-FeTiO₃) hetero structure supported on glycol chitosan catalyst was completely prepared, also, and its structural, and optical properties were characterized. Meantime, scanning electron microscopy, X-ray diffraction, X-ray photoelectron, and UV-vis spectra were applied. The Ag₃PO₄-FeTiO₃/glycol chitosan catalyst was used to degrade metronidazole under visible-light irradiation. The degradation rate of metronidazole in 25 min by Ag₃PO₄-FeTiO₃/glycol chitosan nanocomposites was found to be 99.2% under UV light irradiation, which was higher than that by Ag₃PO₄-FeTiO₃ (72.24%) and FeTiO₃ (35.5%), respectively. The active species trapping test of Ag₃PO₄-FeTiO₃/glycol chitosan indicated that ·OH and ·O₂^- participated during the reaction. The diffusion method was evaluated to appraise the bactericidal activity of the synthesized nanomaterials when tested against both Staphylococcus aureus and Escherichia coli bacteria, with or without LED-light irradiation. The antibacterial tests show higher inhibition zones under light illumination as compared to dark conditions. The antifungal properties of the prepared nanomaterials were analyzed by fungi (Aspergillus niger, and Fusarium solani) using disc diffusion analysis. It was confirmed that the prepared nanomaterials have the best antifungal agent as compared to the standard antibiotics. When the Ag₃PO₄-FeTiO₃/glycol chitosan was used, the amount of inhibition zone was enhanced.

Silk fibroin and silk-based biomaterial derivatives for ideal wound dressings

Silk fibroin (SF) is derived from Bombyx mori silkworm cocoons and has been used in textiles and as a suture material for decades. More recently, SF has been used for various new biomedical applications, including as a wound dressing, owing to its excellent biological and mechanical properties. Specifically, the mechanical stiffness, versatility, biocompatibility, biodegradability, water vapour permeability and slight bactericidal properties make SF an excellent candidate biomaterial for wound dressing applications. The effectiveness of SF as a wound dressing has been tested and well-documented in vitro as well as in-vivo, as described here. Dressings based on SF are currently used for treating a wide variety of chronic and acute (e.g. burn) wounds. SF and its derivatives prepared as biomaterials are available as sponges, hydrogels, nanofibrous matrices, scaffolds, micro/nanoparticles, and films. The present review discusses the potential role of SF in wound dressing and its modulation for wound dressing applications. The comparison of SF based dressings with other natural polymers understands the readers, the scope and limitation of the subject in-depth.

Nano-Modified Titanium Implant Materials: A Way Toward Improved Antibacterial Properties

Titanium and its alloys have superb biocompatibility, low elastic modulus, and favorable corrosion resistance. These exceptional properties lead to its wide use as a medical implant material. Titanium itself does not have antibacterial properties, so bacteria can gather and adhere to its surface resulting in infection issues. The infection is among the main reasons for implant failure in orthopedic surgeries. Nano-modification, as one of the good options, has the potential to induce different degrees of antibacterial effect on the surface of implant materials. At the same time, the nano-modification procedure and the produced nanostructures should not adversely affect the osteogenic activity, and it should simultaneously lead to favorable antibacterial properties on the surface of the implant. This article scrutinizes and deals with the surface nano-modification of titanium implant materials from three aspects: nanostructures formation procedures, nanomaterials loading, and nano-morphology. In this regard, the research progress on the antibacterial properties of various surface nano-modification of titanium implant materials and the related procedures are introduced, and the new trends will be discussed in order to improve the related materials and methods.

Microstructure and Optical Properties of E-Beam Evaporated Zinc Oxide Films-Effects of Decomposition and Surface Desorption

Zinc oxide films have been fabricated by the electron beam physical vapour deposition (PVD) technique. The effect of substrate temperature during fabrication and annealing temperature (carried out in ultra high vacuum conditions) has been investigated by means of atomic force microscopy, scanning electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy and spectroscopic ellipsometry. It was found that the layer deposited at room temperature is composed of Zn and ZnO crystallites with a number of orientations, whereas those grown at 100 and 200 ∘C consist of ZnO grains and exhibit privileged growth direction. Presented results clearly show the influence of ZnO decomposition and segregation of Zn atoms during evaporation and post-deposition annealing on microstructure and optical properties of zinc oxide films.

Loading of Zn/ZnO particles in the precursor feedstock affects the characteristics of liquid plasma sprayed nano-ZnO coatings for photocatalytic applications

It is known that ZnO is an n-type semiconductor with photocatalytic performances under ultraviolet light irradiation. Constructing a superior structure for a modified electron band has been one of the major research goals for photocatalytic ZnO. Here we report a new technical route for making nano-ZnO coatings with a porous topographic morphology. The coatings were fabricated by plasma spraying the mixture of suspension and solution liquid precursors. Pre-loading of ZnO and Zn powders in the precursor was carried out for the purpose of tailoring the structure of the coatings. The coatings in micron thicknesses showed a porous skeleton and a fluffy top layer consisting of ultrafine ZnO grains. Photocatalytic testing by measuring the degradation of methylene blue revealed significantly enhanced activities of the coatings deposited using the ZnO/Zn loaded precursor. The hybrid-structured ZnO coatings exhibited a narrowed band gap and modified oxygen defects as compared to those deposited from the single liquid feedstock. The results shed light on a one-step easy thermal spray fabrication of polytropic nanostructured functional coatings by employing solid powder-loaded liquid as the starting feedstock.

Removal of Acid Blue 62 textile dye from aqueous solutions by cerium reagents

The removal of Acid Blue 62 (AB62) dye which is known as a pollutant agent and contains in wastewater of textile industry has been studied in this work by using five various cerium compounds as the oxidizing agents. The parameters involved in the oxidation reaction such as pH, initial dye concentration and the oxidizing agent dosage have been investigated using both batch and semi-batch reactors at ambient temperature. The results indicated that the rate of oxidation for various cerium reagents is in the following order: CeF₄ > (NH₄)₂Ce (NO₃)₆> Ce (SO₄)₂ > CeCl₃ > Ce (CH₃COO)₃, where cerium fluoride (CeF₄) had the highest removal yields, 99.9% and 95%, for dye de-colouration and COD (chemical oxygen demand), respectively. The analysis of the dye removal was done by using UV-VIS spectrometry, GC-MS and HPLC methods which indicated the aromatic ring cleavage of AB62 dye by CeF₄. The half-life measurement was employed to evaluate the reaction rate model for decomposition of AB62 dye by CeF₄.