Facile and eco-benign synthesis of Au@Fe2O3 nanocomposite: Efficient photocatalytic, antibacterial and antioxidant agent

Green synthesis of a lactoferrin-infused silver nanoparticle gel for enhanced wound healing

The study analyzed the benefits of nano-silver (AgNPs) in reducing side effects and enhancing efficacy, highlighting the advantages compared to silver ions. The study examined the production of AgNPs-lactoferrin complexes (AgNPs-LTF) using bovine lactoferrin (LTF) at 1, 2, and 4 mM concentrations. The objective was to create an AgNPs-LTF gel with Carbopol as the base and assess its effectiveness in enhancing wound healing in rats. UV-Vis, PL, FTIR, and XRD analyses confirmed the synthesis of AgNPs. Microscopic examinations (TEM and SEM) showed mainly spherical AgNPs in the AgNPs-LTF samples, with diameters between 11 and 27 nm. The AgNPs-LTF gel with biologically processed AgNPs demonstrated effective infection control and enhanced wound healing outcomes. In Sprague-Dawley rats, the 4 mM AgNPs-LTF gel demonstrated significant wound closure, achieving complete closure by day 10, exceeding the healing rates of both the LTF and control groups. The AgNPs-LTF complex demonstrated high robustness and exceeded the performance of native LTF, exhibiting similar toxicity levels to AgNPs. The study shows the effectiveness of AgNPs-LTF gel in wound treatment, indicating its potential as a viable treatment option.

Efficient photocatalytic methylene blue dye degradation from green-synthesized silver-doped iron oxide (Ag@Fe2O3) nanostructures

This study presents an environmentally friendly method for synthesizing Ag@Fe2O3 nanostructures through a hydrothermal technique that utilizes Saussurea obvallata leaf extract as a reducing and capping agent. The material was characterized using UV-Vis, FTIR, XRD, SEM-EDX, and TEM-SAED-line profile analysis. The UV-Vis shows a maximum absorbance peak at 380 nm, showing a band gap of 3.26 eV. FTIR analysis revealed several functional groups (vibrational modes), including 944 and 514 cm-1 (Fe-O) and 445 cm-1 (Ag-O). XRD spectra analysis confirmed the crystalline nature and, using the Scherrer equation, showed an average crystallite size of 49.57 nm. EDX confirmed the presence of only Ag, Fe, and O elements. SEM and TEM-SAED analyses revealed an echinus-like morphology with an interplanar spacing of 126 pm of the nanostructures. The photocatalytic activity of Ag@Fe2O3 was investigated through the degradation of methylene blue (MB) dye in the presence of UV-visible light irradiation. It was observed that 97.10% MB dye degradation occurred within 60 min, with the rate constant and half-life being 0.03025 min-1 and 22.90 min, respectively. It was deduced that the synergistic interaction of Ag with Fe2O3 promoted the separation of charge, significantly diminishing electron-hole recombination. This research presents plant extract as a readily available, cost-effective, and environmentally friendly way to produce highly efficient photocatalysts for degrading wastewater dye compounds.

A comparative study on green synthesis and characterization of Mn doped ZnO nanocomposite for antibacterial and photocatalytic applications

Biological and green synthesis of nanomaterial is a superior choice over chemical and physical methods due to nanoscale attributes implanted in a green chemistry matrix, have sparked a lot of interest for their potential uses in a variety of sectors. This research investigates the growing relevance of nanocomposites manufactured using ecologically friendly, green technologies. The transition to green synthesis correlates with the worldwide drive for environmentally sound procedures, limiting the use of traditional harsh synthetic techniques. Herein, manganese was decorated on ZnO NPs via reducing agent of Withania-extract and confirmed by UV-spectrophotometry with highest peak at 1:2 ratio precursors, and having lower bandgap energy (3.3 eV). XRD showed the sharp peaks and confirms the formation of nanoparticles, having particle size in range of 11-14 nm. SEM confirmed amorphous tetragonal structure while EDX spectroscopy showed the presence of Zn and Mn in all composition. Green synthesized Mn-decorated ZnO-NPs screened against bacterial strains and exhibited excellent antimicrobial activities against gram-negative and gram-positive bacteria. To check further, applicability of synthesized Mn-decorated Zn nanocomposites, their photocatalytic activity against toxic water pollutants (methylene blue (MB) dye) were also investigated and results showed that 53.8% degradation of MB was done successfully. Furthermore, the installation of green chemistry in synthesizing nanocomposites by using plant extract matrix optimizes antibacterial characteristics, antioxidant and biodegradability, helping to build sustainable green Mn decorated ZnO nanomaterial. This work, explains how biologically friendly Mn-doped ZnO nanocomposites can help reduce the environmental impact of traditional packaging materials. Based on these findings, it was determined that nanocomposites derived from biological resources should be produced on a wide scale to eradicate environmental and water contaminants through degradation.

Green Synthesis of Magnetic Supramolecules β-Cyclodextrin/Iron Oxide Nanoparticles for Photocatalytic and Antibacterial Applications

Iron oxide nanoparticles (Fe3O4NPs) are a fascinating field of study due to their wide range of practical applications in environmental and medical contexts. This study presents a straightforward, environmentally friendly method for producing Fe3O4NPs utilizing β-cyclodextrin (β-CD) as a reducing and capping agent. This approach results in the rapid and effective eco-friendly synthesis of β-CD/Fe3O4NPs. The properties and characteristics of β-CD/Fe3O4NPs were investigated using various methods, including ultraviolet-visible (UV/vis) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), thermogravimetry analysis (TGA), and vibrating-sample magnetometry (VSM). The absorption of β-CD/Fe3O4NPs caused a distinct peak at 349 nm, as evidenced by the results of UV/vis studies. This peak was attributed to the absorption of surface plasmon resonance. The crystalline nature of β-CD/Fe3O4NPs was confirmed through XRD analysis. The SEM and TEM analyses have verified the geometry and structural characteristics of β-CD/Fe3O4NPs. The β-CD/Fe3O4NPs exhibited remarkable effectiveness in the decomposing efficiency (%) of methylene blue (MB) dye with 52.2, 94.1, and 100% for 0.2, 0.4, and 0.6 g β-CD/Fe3O4NPs, respectively. In addition, the highest efficiency in hunting radicals was observed (347.2 ± 8.2 mg/g) at 100 mg/mL β-CD/Fe3O4NPs; the combination of β-CD/Fe3O4NPs exhibited remarkable effectiveness in inhibiting the growth of some bacteria that cause infections. The capabilities of β-CD/Fe3O4NPs for various applications showed that these materials could be used in photocatalytic, antioxidants, and antibacterial. Additionally, the eco-friendly synthesis of these materials makes them a promising option for the remediation of harmful pollutants and microbes.

Hybrid nanostructures exhibiting both photocatalytic and antibacterial activity-a review

The most vital issues of the modern world for a sustainable future are "health" and "the environment." Scientific endeavors to tackle these two major concerns for mankind need serious attention. The photocatalytic activity toward curbing environmental pollution and antibacterial performance toward a healthy society are two directions that have been emphasized for decades. Recently, materials engineering, in their nanodimension, has shown tremendous possibilities to integrate these functionalities within the same materials. In particular, hybrid nanostructures have shown magnificent prospects to combat both crucial challenges. Many researchers are separately engaged in this important field of research but the collective knowledge on this domain which can facilitate them to excel is badly missing. The present article integrates the development of different hybrid nanostructures which exhibit both photocatalytic degradations of environmental pollutants and antibacterial efficiency. Various synthesis techniques of those hybrid nanomaterials have been discussed. Hybrid nanosystems based on several successful materials have been categorically discussed for better insight into the research advancement in this direction. In particular, Ag-based, metal oxides-based, layered carbon material-based, and Mexene- and self-cleaning-based materials have been chosen for detailing their performance as anti-pollutant and antibacterial materials. Those hybrid systems along with some miscellaneous booming nanostructured materials have been discussed comprehensively with their success and limitations toward their bifunctionality as antipollutant and antibacterial agents.

Recent development of metal oxides and chalcogenides as antimicrobial agents

Pathogenic microbes are a major concern in hospitals and other healthcare facilities because they affect the proper performance of medical devices, surgical devices, etc. Due to the antimicrobial resistance or multidrug resistance, combatting these microbial infections has grown to be a significant research area in science and medicine as well as a critical health concern. Antibiotic resistance is where microbes acquire and innately exhibit resistance to antimicrobial agents. Therefore, the development of materials with promising antimicrobial strategy is a necessity. Amongst other available antimicrobial agents, metal oxide and chalcogenide-based materials have shown to be promising antimicrobial agents due to their inherent antimicrobial activity as well as their ability to kill and inhibit the growth of microbes effectively. Moreover, other features including the superior efficacy, low toxicity, tunable structure, and band gap energy has makes metal oxides (i.e. TiO₂, ZnO, SnO₂ and CeO₂ in particular) and chalcogenides (Ag₂S, MoS₂, and CuS) promising candidates for antimicrobial applications as illustrated by examples discussed in this review.

Electron transfer-based antioxidant nanozymes: Emerging therapeutics for inflammatory diseases

Inflammatory diseases are usually featured with relatively high level of reactive oxygen species (ROS). The excess ROS facilitate the polarization of microphages into proinflammatory M1 phenotype, and cause DNA damage, protein carbonylation, and lipid peroxidation, resulting in further deterioration of inflammatory diseases. Therefore, alleviating oxidative stress by ROS scavenging has been an effective strategy for reversing inflammation. Inspired by the natural antioxidant enzymes, electron transfer-based artificial antioxidant nanozymes have been emerging therapeutics for the treatment of inflammatory diseases. The present review starts with the basic knowledge of ROS and diseases, followed by summarizing the possible active centers for the preparation of antioxidant nanozymes. The strategies for the design of antioxidant nanozymes on the purpose of higher catalytic activity are provided, and the applications of the developed antioxidant nanozymes on the therapy of inflammatory diseases are discussed. A perspective is included for the design and applications of artificial antioxidant nanozymes in biomedicine as well.

Effect of Pd-Doping Concentrations on the Photocatalytic, Photoelectrochemical, and Photoantibacterial Properties of CeO2

Cerium oxide (CeO2) can exhibit good photocatalytic and photoantibacterial activities. However, its light-harvesting property is rather limited due to its large band gap. In order to boost these properties, doping with metal ions can improve light absorption and charge mobility. In this report, CeO2 and palladium−doped CeO2 (Pd−CeO2) NPs were synthesized via the microwave-assisted synthesis method. The structural, optical, and morphological studies of CeO2 and Pd−CeO2 NPs were carried out using various techniques. Mixed phases of CeO2/Ce2O3 were observed in pure CeO2 (S−CeO2) and Pd−CeO2. However, the Ce2O3 phase gradually disappeared upon doping with a higher percentage of Pd. Almost spherical particles were observed with average sizes between 6 and 13 nm. It was found that the incorporation of Pd reduced the particle size. Moreover, band gap energies of S−CeO2 and Pd−CeO2 NPs were reduced from 2.56 to 2.27 eV, and the PL intensities were also quenched with more Pd doping. The shifts in the conduction band and valence band were found to cause the reduction in the band gap energies of S−CeO2 and Pd−CeO2 NPs. In the case of photocatalytic degradation of methylene blue, photoelectrochemical, and photoantibacterial activities, Pd−CeO2 NPs showed enhanced activities under visible light irradiation. Therefore, Pd−CeO2 NPs have been shown to be a visible-light active material.

Phyto-Capped Ag Nanoparticles: Green Synthesis, Characterization, and Catalytic and Antioxidant Activities

Using a simple approach, silver nanoparticles (Ag NPs) were synthesized from green coffee bean extract. The optical color change from yellowish to reddish-brown of the green-produced Ag NPs was initially observed, which was confirmed by the UV-Visible spectrophotometer’s surface plasmonic resonance (SPR) bands at 329 and 425 nm. The functional groups of green coffee-capped Ag NPs (GC-capped Ag NPs) were studied using a Fourier transform infrared spectrometer, revealing that Ag NPs had been capped by phytochemicals, resulting in excellent stability, and preventing nanoparticle aggregation. The presence of elemental silver is confirmed by energy dispersive X-ray analysis. In addition to the measurement of the zeta potential of the prepared GC-capped Ag NPs, the size distribution is evaluated by the dynamic light scattering. Depending on the nano-morphological study, the particle diameter of Ag NPs is 8.6 ± 3.5 nm, while the particle size of GC-capped Ag NPs is 29.9 ± 4.3 nm, implying the presence of well-dispersed nanospheres with an average capsulation layer of thickness 10.7 nm. The phyto-capped Ag NPs were found to be crystalline, having a face-centered cubic (FCC) lattice structure and Ag crystallite size of ~7.2 nm, according to the XRD crystallographic analysis. The catalytic performance of phyto-capped Ag NPs in the removal of methylene blue dye by sodium borohydride (NaBH₄) was investigated for 12 min to reach a degradation efficiency of approximately 96%. The scavenging activities of 2,2-Diphenyl-1-picrylhydrazyl (DPPH) free radicals are also examined in comparison to previously reported Ag-based nano-catalysts, demonstrating a remarkable IC₅₀ of 26.88 µg/mL, which is the first time it has been recorded.

Opposite effects of gold and silver nanoparticle decoration of graphenic surfaces on bacterial attachment

The interaction between bacteria and nanoparticles is currently a central topic in bionanotechnology.

Multifarious Biological Applications and Toxic Hg2+ Sensing Potentiality of Biogenic Silver Nanoparticles Based on Securidaca inappendiculata Hassk Stem Extract

INTRODUCTION

The use of environmentally benign resources for nanoparticles synthesis is consistently pushed to the front burner in a bid to ensure and enhance environmental protection and beneficiation. In this light, application of different plant parts for the reduction and stabilization of nanoparticles is gaining popularity.

MATERIALS AND METHODS

In this contribution, we have exploited Securidaca inappendiculata stem extract (SISE), as the reducing and stabilizing agent for room temperature synthesis of highly stable and dispersed AgNPs. The major bioactive compounds in SISE were profiled using an ultra-high-performance liquid chromatography-quadrupole-time-of-flight mass spectrometry (UHPLC-MS-QTOF-MS).

RESULTS AND DISCUSSION

SISE could reduce silver salts to its nanoparticles almost instantaneously with a maximum absorption spectrum at 423 nm, under the optimal conditions. The fabricated SISE AgNPs was extensively characterized using FTIR, TEM, SEM, XRD, EDS, Zeta analysis/DLS and TGA/DTG analysis. SISE AgNPs with average particles size between 10-15 nm and a zeta potential value of -19.5 ± 1.8 mV was obtained. It was investigated for in-vitro biological applications by carrying out, antimicrobial, antioxidant, hemolytic, cytotoxicity and antidiabetic assays. It was found that SISE AgNPs exhibited potent antimicrobial capacity against some food borne microbes, good antioxidant property, while also demonstrating high biocompatibility. Moreover, with a view to extending further the applications SISE AgNPs, it was tested as a colorimetric nanoprobe for Hg2+ detection in aqueous environment, where good linearity between 0.10 and 10.0 μM, with a detection limit of 26.5 nM, were obtained. The practicality of the probe was investigated by carrying out Hg2+ detection in water sample, with good accuracy and precision.

DISCUSSION

Overall, this work introduced a new stabilizer for biocompatible AgNPs with far-reaching applications.

Facile synthesis of silver modified zinc oxide nanocomposite: An efficient visible light active nanomaterial for bacterial inhibition and dye degradation

The present study reports the synthesis of silver (Ag) decorated zinc oxide (ZnO) nanocomposite via green synthesis method by using Acacia arabica plant leaves extract as both reducing and capping agent. The results clearly indicate a uniform distribution of Ag nanoparticles (NPs) over ZnO surface. Various analytical and spectroscopic techniques were used for investigating the formation and morphology of as-synthesized Ag/ZnO nanocomposites. Emergence of SPR at 424 and 378 nm confirmed the synthesis of AgNPs and ZnO respectively. The confirmation of elemental composition and crystal structure of prepared nanomaterials (NMs) was carried out via EDX and XRD analysis. Results obtained from HRTEM and SEM analysis indicated small sized spherically shaped NMs. The as-synthesized was checked for its photocatalytic activity towards degradation of MB in the presence as well as absence of light irradiation. Results of degradation study revealed that Ag/ZnO exhibits remarkable photocatalytic activity in the presence of light whereby removing 90% of MB within 80 min. Moreover, the antibacterial activity of synthesized nanocomposite was examined in both visible light and dark conditions. The experiment showed that nanomaterial depicts enhanced antibacterial activity in light in comparison to dark. The results showed that the inhibition diameter of Ag/ZnO nanocomposite in light was found to be 18 (±0.2), 22 (±0.3) against E. coli and S. aureus respectively. The inhibition zone of the said nanomaterial against E. coli and S. aureus in dark was 11 (±0.3), 14 (±0.5) respectively. These results conclude that activity is delivered both in the presence of visible light and dark but efficiency of antibacterial activity is found to be more in visible light in comparison.

A study on the high efficiency reduction of p-nitrophenol (4-NP) by a Fe(OH)3/Fe2O3@Au composite catalyst

Precious metal nanometric catalysts are widely used in the removal of harmful substances. In the process of synthesis and catalytic reaction, it is particularly important to study green and simple synthesis methods and high catalytic efficiency. In this paper, a green one-step method was used to synthesize the Fe(OH)₃/Fe₂O₃@Au composite catalyst, in which Au was single atom-dispersed. The removal of 4-nitrophenol (4-NP), a typical dangerous chemical widely existing in factory waste gas, waste water and automobile exhaust gas, was catalysed by Fe(OH)₃/Fe₂O₃@Au. The catalytic performance of Fe(OH)₃/Fe₂O₃@Au with different synthesis conditions (different amounts of MES, NaBH₄, FeSO₄, Au and Pt) on the 4-NP reduction reaction were systematically studied. Finally, the stability and recyclability of Fe(OH)₃/Fe₂O₃@Au composite nanocatalyst were investigated thoroughly.

Novel Dy2O3/ZnO-Au ternary nanocomposites: Green synthesis using pomegranate fruit extract, characterization and their photocatalytic and antibacterial properties

In this study for the first time, high efficient, eco-friendly and novel Dy₂O₃/ZnO-Au ternary nanocomposites (Dy/ZnO-AuNCs) were prepared in presence of pomegranate fruit (PF) extract as capping and reducing agents (Dy/ZnO-AuNCs@PF). The influence of various parameters such as basic agents, reducing agents, sonication power, and sonication time were performed to reach the optimum condition. The formation of the products was characterized by FT-IR, HRTEM, XRD, FE-SEM, TEM, EDX and DRS techniques. The XRD and TEM analysis showed that the morphology and crystallite size of nanocomposites were spherical morphology and 85-90 nm, respectively. The obtained Dy/ZnO-AuNCs@PF were investigated as a nanocatalyst for degradation of erythrosine (ES) as anionic dye and basic violet 10 (BV10) as cationic dye under UV and visible light irradiations. The Dy/ZnO-AuNCs@PF exhibited higher photodegradation against ES (89.6%) and BV10 (91.3%) than pure Dy₂O₃ (63.1% for ES, 66.5% for BV10) and Dy₂O₃/ZnO (64.5% for ES, 70.8% for BV10) under UV irradiation. It was found that gold nanoparticles have significant effect on Dy/ZnO-AuNCs@PF catalytic performance for decomposition of organic pollutants. In addition, Dy/ZnO-AuNCs@PF showed excellent in-vitro antibacterial activity against A. baumannii, S. aureus and P. mirabilis with MIC and MBC values of (5, 80 mg/ml), (5, 40 mg/ml) and (2.5, 20 mg/ml), respectively. Generally, according to its excellent antibacterial and catalytic activity, Dy/ZnO-AuNCs@PF can be used in biomedical and environmental applications.

Green-synthesized CeO2 nanoparticles for photocatalytic, antimicrobial, antioxidant and cytotoxicity activities

Cerium oxide nanoparticles (CeO2 NPs) are a sought-after material in numerous fields due to their potential applications such as in catalysis, cancer therapy, photocatalytic degradation of pollutants, sensors, polishing agents. Green synthesis usually involves the production of CeO2 assisted by organic extracts obtained from plants, leaves, flowers, bacteria, algae, food, fruits, etc. The phytochemicals present in the organic extracts adhere to the NPs and act as reducing and/or oxidizing agents and capping agents to stabilize the NPs, modify the particle size, morphology and band gap energy of the as-synthesized materials, which would be advantageous for numerous applications. This review focuses on the green extract-mediated synthesis of CeO2 NPs and discusses the effects on CeO2 NPs of various synthesis methods that have been reported. Several photocatalytic, antimicrobial, antioxidant and cytotoxicity applications have been evaluated, compared and discussed. Future prospects are also suggested.

Synthesis and characterization of lysozyme-conjugated Ag.ZnO@HA nanocomposite: A redox and pH-responsive antimicrobial agent with photocatalytic activity

Hydroxyapatite (HA) is extensively used for implantable device coating; however, it lacks antibacterial property, leading to potential bacterial infection during orthopedic implantation surgery. Herein, to enhance the antibacterial activity of HA, a redox- and pH-responsive HA nanocomposite with photocatalytic activity was designed. A photosensitive heterostructure, zinc oxide/hydroxyapatite (ZnO.HA), was coated with Ag nanoparticles (AgNPs) with assisted gallic acid using the UV-irradiation method. An antibacterial enzyme, lysozyme, was then conjugated on the surface of the nanocomposite by a cleavable disulfide linker, resulting in a redox-sensitive nanoplatform. In comparison with bare HA, the designed nanocomposites as Lyso.CAGZ@HA displayed much higher antibacterial activity (> 5-fold) toward Escherichia coli (E. coli) owing to the synergistic antibacterial effects of ZnONPs, AgNPs, gallic acid, and lysozyme on the surface of the nanocomposite. However, antibacterial and antifouling effects are much more enhanced in Lyso.CAGZ@HA-treated bacteria as they were subjected to UVA irradiation. Moreover, the cellular uptake of nanocomposite and intracellular glutathione depletion enhanced in the presence of UVA light, resulting in reactive oxygen specious generation enhancement. Further, in vitro cytotoxicity experiments on mammalian cells (human foreskin fibroblast) revealed that nanocomposite has no cytotoxic effects. Hence, this study demonstrated that Lyso.CAGZ@HA could be considered as a potential therapeutic approach against bacterial infectious diseases.

A Tagetes minuta based eco-benign synthesis of multifunctional Au/MgO nanocomposite with enhanced photocatalytic, antibacterial and DPPH scavenging activities

In this research work, facile, economical and eco-benign experimental procedure were adopted to synthesize Au/MgO nanocomposite with the help of Tagetes minuta leaves extract. Phytochemicals present in the leaves of Tagetes minuta were acting as reducing and stabilizing agents to avoid aggregation of nanomaterials during the preparation of Au/MgO nanocomposite. The biologically synthesized nanocomposite were systematically characterized by UV-vis spectroscopy, Scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier transform infrared microscopy (FTIR), High resolution transmission electron microscopy (HRTEM), Thermogravimetric analysis (TGA), dynamic light scattering (DLS) and elemental mapping. UV-visible spectrum confirmed the presence of MgO and Au due to the presence of two SPR peaks at 315 nm and 528 nm, respectively. Moreover, the Au/MgO nanocomposite exhibited superior photocatalytic, antibacterial, hemolytic, and antioxidant activities. Photocatalytic performance tests of Au/MgO nanocomposite were- appraised by the rapid degradation of the methylene blue (MB) under UV light illumination. More importantly, after four successive cycles of MB degradation, the photocatalytic efficacy remained unchanged, which ensures the stability of the Au/MgO nanocomposite. Furthermore, the antibacterial tests showed that the advanced nanocomposite inhibited the growth of Escherichia coli, Bacillus subtilis, and Staphylococcus aureus with zones of inhibition 18 (±0.3), 21 (±0.5), and 19 (±0.4) mm, respectively. The cytotoxicity study revealed that Au/MgO nanocomposite is nontoxic to ordinary healthy RBCs. Interestingly, the Au/MgO nanocomposite also possesses an excellent antioxidant activity, whereby effectively scavenging 82% stable and harmful DPPH. Overall, the present study concludes that eco-benign Au/MgO nanocomposite has excellent potential for the remediation of bacterial pathogens and degradation of MB.

Rapid and effective photodynamic treatment of biofilm infections using low doses of amoxicillin-coated gold nanoparticles

Bacterial biofilm are complex microbial communities covered by a matrix of extracellular polymeric substances, which develops when a community of microorganisms irreversibly adheres to a living or inert surface. This structure is considered an important virulence factor because it is difficult to eradicate and often responsible for treatment failures. This adherent community represents one of the greatest problems in public health due to the continued emergence of conventional antibiotic-therapy resistance. Photodynamic Antimicrobial Therapy (PACT) is a therapeutic alternative and promises to be an effective treatment against multiresistant bacteria biofilm, demonstrating a broad spectrum of action. This work demonstrates the reduction in biofilms of relevant clinical isolates (as Pseudomonas aeruginosa and Staphylococcus aureus) treated with PACT using low concentrations of amoxicillin-coated gold nanoparticles (amoxi@AuNP) as a photosensitizer. Moreover, the viability reduction of 60% in S. aureus biofilms and 70% in P. aeruginosa biofilms were obtained after three hours of irradiation with white light and amoxi@AuNP. Scanning electron microscopy analysis revealed that amoxi@AuNP could penetrate and cause damage to the biofilm matrix, and interact with bacteria cells. A strong biofilm production in P. aeruginosa was observed by confocal laser scanning microscopy using acridine orange as a probe, and a markedly decrease in live bacteria was appreciated when PACT was applied. The use of amoxi@AuNP for PACT allows the viability reduction of clinical Gram positive and Gram negative biofilms. This novel strategy needs shorter irradiation times and lower concentrations of nanoparticles than other reports described. This could be attributed to two major innovations: the selectivity for the bacterial wall given by the amoxicillin and the polydispersity of size and shapes with seems to contribute to the photo-antibacterial capacity.

Iron and zinc ions, potent weapons against multidrug-resistant bacteria

Drug-resistant bacteria are becoming an increasingly widespread problem in the clinical setting. The current pipeline of antibiotics cannot provide satisfactory options for clinicians, which brought increasing attention to the development and application of non-traditional antimicrobial substances as alternatives. Metal ions, such as iron and zinc ions, have been widely applied to inhibit pathogens through different mechanisms, including synergistic action with different metabolic enzymes, regulation of efflux pumps, and inhibition of biofilm formation. Compared with traditional metal oxide nanoparticles, iron oxide nanoparticles (IONPs) and zinc oxide nanoparticles (ZnO-NPs) display stronger bactericidal effect because of their smaller ion particle sizes and higher surface energies. The combined utilization of metal NPs (nanoparticles) and antibiotics paves a new way to enhance antimicrobial efficacy and reduce the incidence of drug resistance. In this review, we summarize the physiological roles and bactericidal mechanisms of iron and zinc ions, present the recent progress in the research on the joint use of metal NPs with different antibiotics, and highlight the promising prospects of metal NPs as antimicrobial agents for tackling multidrug-resistant bacteria.

Cu/H3BTC MOF as a potential antibacterial therapeutic agent against Staphylococcus aureus and Escherichia coli

The objective of this study was to design a more effective antibacterial agent to overcome the problem of fast-growing bacterial resistance.

Nickel-Doped Cerium Oxide Nanoparticles: Green Synthesis Using Stevia and Protective Effect against Harmful Ultraviolet Rays

Nanoparticles of cerium oxide CeO2 are important nanomaterials with remarkable properties for use in both industrial and non-industrial fields. In a general way, doping of oxide nanometric with transition metals improves the properties of nanoparticles. In this study, nickel- doped cerium oxide nanoparticles were synthesized from Stevia rebaudiana extract. Both doped and non-doped nanoparticles were characterized by X-ray diffraction, Field Emission Scanning Electron Microscopy, Energy Dispersive X-ray, Raman spectroscopy, and Vibrating-Sample Magnetometry analysis. According to X-ray diffraction, Raman and Energy Dispersive X-ray crystalline and single phase of CeO2 and Ni doped CeO2 nanoparticles exhibiting fluorite structure with F2g mode were synthesized. Field Emission Scanning Electron Microscopy shows that CeO2 and Ni doped nanoparticles have spherical shape and sizes ranging of 8 to 10 nm. Ni doping of CeO2 results in an increasing of magnetic properties. The enhancement of ultraviolet protector character via Ni doping of CeO2 is also discussed.