Selective photodegradation of 2,4-D pesticide from water by molecularly imprinted TiO2

3D/1D Fe3O4@TiO2/TC-TiO2/SiO2 Magnetic Inorganic-Framework Molecularly Imprinted Fibers for Targeted Photodegradation

To achieve a selective degradation of pollutants in a water body, 3D/1D magnetic molecularly imprinted fibers Fe3O4@TiO2/TC-TiO2/SiO2 were fabricated by an electrospinning method. The molecularly imprinted layer was successfully prepared by a direct imprinting method using TiO2 as a functional monomer. Fe3O4 facilitates the catalyst recovery and light utilization. The as-prepared fibrous photocatalyst has a large specific surface area of 132.4 m2/g. The successful generation of imprinted sites was proven by various characterizations. The weak interaction between the inorganic functional monomer and tetracycline (TC) was determined to be van der Waals force and hydrogen bonds by the IGMH isosurface theory. The construction of the 3D/1D homojunction of molecularly imprinted materials is beneficial to charge transfer. The as-prepared photocatalyst exhibits a high selectivity coefficient α = 737.38 competing with RhB. The TC removal efficiency reached 100% within only 20 min. In addition, the possible degradation pathway and the degradation mechanism are reasonably proposed. This work not only provides an in-depth mechanism of the weak interaction between the inorganic molecularly imprinted functional monomer and pollutant molecules but also offers new thoughts on the fabrication of photocatalysts for the effective and selective treatment of pollutants in water bodies.

Modification of natural zeolite clinoptilolite and ITS application in the adsorption of herbicides

The clinoptilolite natural zeolites (NZs) posses low herbicide adsorption capacity demanding acid-, alkali-, or salt chemical modifications that enhance its adsorption. However, this may affect the material structure and charge distribution. Alternatively, zeolites may be synthesized at a high cost and time-consuming process. Consequently, new methods, such as the hydrothermal method, for NZ modification needs to be studied. In this sense, a novel surface-modified zeolite (SMZ), using hexadecyltrimethylammonium bromide (CTAB), in acid media was produced by the hydrothermal method and applied for the adsorption of Atrazine (ATZ), Diuron (DIU) and 2,4-D. Commercial NZ and SMZ were characterized by SEM, XRD, TGA, FT-IR, AA spectroscopy, pHPZC, Zeta potential and N2-physisorption. The SMZ chosen for the adsorption experiments was the one with the highest modification yield and adsorption capacity obtained from a complete design of experiments (CTAB=0.74 ; D=12 Mesh; HCl=0.1 M; t=6 h and T=205 ºC). The adsorption experiments revealed that the SMZ adsorption capacity for the herbicide 2,4-D (qmax=9.02 mg/g) was greater than that obtained for ATZ (qmax=2.11 mg/g) and DIU (qmax=1.85 mg/g), which was explained by the presence of the hydroxyl group and by geometric characteristics of the 2,4-D. Adsorption models' fitting showed that the adsorption of 2,4-D onto SMZ were best described by pseudo-second order kinetic (k2=0.005-0.006 g/mg.min; qe,exp=7.122-8.614 mg/g) and Langmuir isothermal model (KL=0.283-0.499 L/mg; qm=7.167-7.995 mg/g). These results indicate that the hydrothermal method is a viable alternative to enable the use of NZs for the adsorption of emerging contaminants from wastewater.

Unveiling the Latest Developments in Molecularly Imprinted Photocatalysts: A State-of-the-Art Review

Responding to the growing concerns about environmental pollutants, scientists are increasingly turning to innovative solutions rooted in the field of environmental science. One such promising avenue combines the robustness of traditional photocatalysis with the precision of molecular imprinting, leading to the proposition of molecularly imprinted photocatalysts (MIPCs). These MIPCs hold the potential to specifically target and eliminate environmental pollutants, marking them as a promising tool in modern environmental remediation. As researchers delve deeper into this field, the design and optimization of MIPCs have become hotbeds for scientific inquiry. This comprehensive overview delves into the multifaceted approaches to MIPC design, elucidating on aspects like the selection of appropriate photocatalytic bases, the pivotal role of templates, the choice of monomeric building blocks, and the integration of effective cross-linking agents. However, as with all burgeoning technologies, the development of MIPCs is not without its challenges. These potential impediments to the successful innovation and implementation of MIPCs are also explored.

Adsorptive removal of dichlorophenoxyacetic acid (2,4-D) using novel nanoparticles based on cationic surfactant-coated titania nanoparticles

A novel nanomaterial based on cationic surfactant-coated TiO₂ nanoparticle (CCTN) was systematically fabricated in this work. Synthesized titania nanoparticles were thoroughly characterized by XRD, FT-IR, HR-TEM, TEM-EDX, SEM with EDX mapping, BET, and ζ potential measurements. The adsorption of cationic surfactant, cetyltrimethylammonium bromide (CTAB), on TiO₂ was studied under various pH and ionic strength conditions. Adsorption of CTAB on TiO₂ increased with ionic strength increment in the presence of hemimicelle monolayer structure, indicating that nonelectrostatic and electrostatic forces control CTAB uptake. CTAB adsorption isotherms on TiO₂ were according to a two-step model. Potential application in pesticide removal of 2,4-dichorophenoxy acetic acid (2,4-D) using CCTN was also studied. Optimum parameters for 2,4-D treatment through adsorption technique were pH 5, adsorption time of 120 min, and CCTN dosage of 10 mg·mL^-1. Very low 2,4-D removal efficiency using TiO₂ without CTAB coating was found to be approximately 28.5% whereas the removal efficiency was up to about 90% by using CCTN under optimum conditions, and the maximum adsorption capacity of 12.79 mg·g^-1 was found. Adsorption isotherms of 2,4-D on CCTN were more suitable with the Langmuir model than Freundlich. Adsorption mechanisms of 2,4-D on CCTN were mainly governed by Columbic attraction based on isotherms and surface charge changes.

One-Pot Synthesis of TiO2-rGO Photocatalysts for the Degradation of Groundwater Pollutants

A non-conventional approach to prepare titanium dioxide-reduced graphene oxide (TiO₂-rGO) nanocomposites based on solar photoreduction is here presented. The standard hydro-solvothermal synthesis of the TiO₂-rGO composites requires high temperatures and several steps, whereas the proposed one-pot preparation allows one to obtain the photocatalysts with a simple and green procedure, by exploiting the photocatalytic properties of titania activated by the solar irradiation. The TiO₂-rGO catalysts were tested in the solar photodegradation of a widely adopted toxic herbicide (2,4-Dichlorophenoxyacetic acid, 2,4-D), obtaining the 97% of degradation after 3 h of irradiation. The as-prepared TiO₂-rGO composites were more active compared to the same photocatalysts prepared through the conventional thermal route. The structural, optical, and textural properties of the composites, determined by Raman, Photoluminescence, Fourier Transform InfraRed (FTIR), UV-vis diffuse reflectance (DRS) spectroscopies, and N₂ absorption-desorption measurements, showed as the solar irradiation favors the reduction of graphene oxide with higher efficiency compared to the thermal-driven synthesis. Furthermore, the possible toxicity of the as-synthesized composites was measured exposing nauplii of microcrustacean Artemia sp. to solutions containing TiO₂-rGO. The good results in the 2,4-D degradation process and the easiness of the TiO₂-rGO synthesis allow to consider the proposed approach a promising strategy to obtain performing photocatalysts.

Recent developments in photocatalytic degradation of insecticides and pesticides

Widespread use of pesticides in agricultural and domestic sectors and their long half-life have led to their accumulation in the environment beyond permissible limits. Advanced chemical oxidation methods including photocatalytic degradation are being widely investigated for their mineralization. Photocatalytic degradation is the most promising method for degrading pesticides as well as other organic pollutants. Titanium dioxide with or without modification has been widely used as the photocatalyst. Some research groups have also tried other photocatalysts. This review presents a critical summary of the research results reported during the past two decades as well as the scope for future research in this area.

Kinetic Resolution of Racemic Mixtures via Enantioselective Photocatalysis

Despite the increasing demand for enantiopure drugs in the pharmaceutical industry, currently available chiral separation technologies are still lagging behind, whether due to throughput or to operability considerations. This paper presents a new kinetic resolution method, based on the specific adsorption of a target enantiomer onto a molecularly imprinted surface of a photocatalyst and its subsequent degradation through a photocatalytic mechanism. The current model system is composed of an active TiO₂ layer, on which the target enantiomer is adsorbed. A photocatalytic suppression layer of Al₂O₃ is then grown around the adsorbed target molecules by atomic layer deposition. Following the removal of the templating molecules, molecularly imprinted cavities that correspond to the adsorbed species are formed. The stereospecific nature of these pores encourages enantioselective degradation of the undesired species through its enhanced adsorption on the photocatalyst surface, while dampening nonselective photocatalytic activity around the imprinted sites. The method, demonstrated with the dipeptide leucylglycine as a model system, revealed a selectivity factor of up to 7 and an enrichment of a single enantiomer to 85% from an initially racemic mixture. The wide range of parameters that can be optimized (photocatalyst, concentration of imprinted sites, type of passivating layer, etc.) points to the great potential of this method for obtaining enantiomerically pure compounds, beginning from racemic mixtures.

Recent Advances in Nanomaterials Based Molecularly Imprinted Electrochemical Sensors

Nanotechnology and molecular imprinting both are omnipresent in the modern scientific world. Molecular recognition in the biological systems was mimicked to an extreme extent with its difficulties through molecular imprinting. Solving the problems related to this mimicking was the goal of science and technology. Some challenges like difficulties with the imprinting of protein, poor compatibility with aqueous environments, template leakage, and heterogeneous populations of binding sites in the polymers that contribute to a high level of nonspecific binding sites were addressed with recent advancement in the modern era. These issues were solved later with nano level instrumentations and inventions. Different types of nanomaterials were employed for this research on molecular recognition through MIPs to enhance selectivity, sensitivity and stability to specific systems such as sensors. This review paper attempts to give all the recent advances in molecular imprinting and the potential of nanomaterials in electrochemical sensors.

Innovative Polymeric Hybrid Nanocomposites for Application in Photocatalysis

The immobilization of inorganic nanomaterials on polymeric substrates has been drawing a lot of attention in recent years owing to the extraordinary properties of the as-obtained materials. The hybrid materials, indeed, combine the benefits of the plastic matter such as flexibility, low-cost, mechanical stability and high durability, with them deriving from their inorganic counterparts. In particular, if the inorganic fillers are nanostructured photocatalysts, the originated hybrid systems will be able to utilize the energy delivered by light, catalysing chemical reactions in a sustainable pathway. Most importantly, since the nanofillers can be ad-hoc anchored to the macromolecular structure, their release in the environment will be prevented, thus overcoming one of the main restrictions that impedes their applications on a large scale. In this review, several typologies of hybrid photocatalytic nanomaterials, obtained by using both organic and inorganic semiconductors and realized with different synthetic protocols, were reported and discussed. In the first part of the manuscript, nanocomposites realized by simply blending the TiO2 or ZnO nanomaterials in thermoplastic polymeric matrices are illustrated. Subsequently, the atomic layer deposition (ALD) technique is presented as an excellent method to formulate polymeric nanocomposites. Successively, some examples of polyporphyrins hybrid systems containing graphene, acting as photocatalysts under visible light irradiation, are discussed. Lastly, photocatalytic polymeric nanosponges, with extraordinary adsorption properties, are shown. All the described materials were deeply characterized and their photocatalytic abilities were evaluated by the degradation of several organic water pollutants such as dyes, phenol, pesticides, drugs, and personal care products. The antibacterial performance was also evaluated for selected systems. The relevance of the obtained results is widely overviewed, opening the route for the application of such multifunctional photocatalytic hybrid materials in wastewater remediation.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

A Highly Efficient Ag Nanoparticle-Immobilized Alginate-g-Polyacrylonitrile Hybrid Photocatalyst for the Degradation of Nitrophenols

Herein, we report PAN-g-Alg@Ag-based nanocatalysts synthesis via in situ oxidative free-radical polymerization of acrylonitrile (AN) using Alg@Ag nanoparticles (Alg@Ag NPs). Various analytical techniques, including FTIR, XRD, SEM, TEM, UV-Vis, and DSC, were employed to determine bonding interactions and chemical characteristics of the nanocatalyst. The optimized response surface methodology coupled central composite design (RSM-CCD) reaction conditions were a 35-min irradiation time in a 70-mg L-1 2,4-dinitrophenol (DNP) solution at pH of 4.68. Here, DNP degradation was 99.46% at a desirability of 1.00. The pseudo-first-order rate constant (K1) values were 0.047, 0.050, 0.054, 0.056, 0.059, and 0.064 min-1 with associated half-life (t1/2) values of 14.74, 13.86, 12.84, 12.38, 11.74, 10.82, and 10.04 min that corresponded to DNP concentrations of 10, 20, 30, 40, 50, 60, and 70 mg L-1, respectively, in the presence of PAN-g-Alg@Ag (0.03 g). The results indicate that the reaction followed the pseudo-first-order kinetic model with an R2 value of 0.99. The combined absorption properties of PAN and Alg@Ag NPs on copolymerization on the surface contributed more charge density to surface plasmon resonance (SPR) in a way to degrade more and more molecules of DNP together with preventing the recombination of electron and hole pairs within the photocatalytic process.

Pesticides and herbicides

This paper highlights a review of scientific papers published in the year 2019 regarding pesticides and herbicides. The scientific review presented in this paper includes the presence and occurrence of pesticides and herbicides in the environment. The entire review divided into different sections, which are grouped into four main sections. Each of these sections provides studies conducted on toxicology, ecological risk assessment, strategies of treatment, policies, modeling, and guidelines regarding pesticides and herbicides management. PRACTITIONERS POINTS: This paper highlights the review of scientific literature published in the year 2019. The review includes the presence and occurrence of pesticides and herbicides in the environment. The review focuses on toxicology, ecological risk assessment, strategies of treatment, policies, modelling and guidelines regarding pesticides and herbicides management. The literature review covers selected papers relevant to the topic.

CeO2 for Water Remediation: Comparison of Various Advanced Oxidation Processes

Three different Advanced Oxidation Processes (AOPs) have been investigated for the degradation of the imidacloprid pesticide in water: photocatalysis, Fenton and photo-Fenton reactions. For these tests, we have compared the performance of two types of CeO2, employed as a non-conventional photocatalyst/Fenton-like material. The first one has been prepared by chemical precipitation with KOH, while the second one has been obtained by exposing the as-synthetized CeO2 to solar irradiation in H2 stream. This latter treatment led to obtain a more defective CeO2 (coded as “grey CeO2”) with the formation of Ce3+ sites on the surface of CeO2, as determined by Raman and X-ray Photoelectron Spectroscopy (XPS) characterizations. This peculiar feature has been demonstrated as beneficial for the solar photo–Fenton reaction, with the best performance exhibited by the grey CeO2. On the contrary, the bare CeO2 showed a photocatalytic activity higher with respect to the grey CeO2, due to the higher exposed surface area and the lower band-gap. The easy synthetic procedures of CeO2 reported here, allows to tune and modify the physico-chemical properties of CeO2, allowing a choice of different CeO2 samples on the basis of the specific AOPs for water remediation. Furthermore, neither of the samples have shown any critical toxicity.

Removal of Lindane from Aqueous Solution Using Aluminum Hydroxide Nanoparticles with Surface Modification by Anionic Surfactant

In the present study, we investigated the removal of an emerging pesticide lindane from aqueous solution using synthesized aluminum hydroxide Al(OH)₃ (bayerite) nanomaterials with surface modification by an anionic surfactant sodium dodecyl sulfate (SDS). The Al(OH)₃ nanoparticles were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) and zeta potential. The lindane removal using SDS-modified nano-aluminum hydroxide nanoparticles (SMNAH) achieved removal of up to 93.68%, which was 3.3 times higher than that of nano-aluminum hydroxide nanoparticles. The adsorptive removal conditions were studied and found to have an adsorption time of 60 min, a pH of 6, an adsorbent dosage of 25 mg/mL and an ionic strength of 10 mM NaCl. After reusing four times, the removal efficiency of lindane using SMNAH still reached 75%. Two-step adsorption can fit adsorption isotherms of lindane onto SMNAH at two salt concentrations. On the basis of the change in zeta potential, surface functional groups and adsorption isotherms, we suggest that the formation of a bilayer micelle induced the removal of lindane.