Effect of active chitosan-pullulan composite edible coating enrich with pomegranate peel extract on the storage quality of green bell pepper

Enhancing circular bioeconomy: Alginate-cellulose nanofibre films/coatings functionalized with encapsulated pomegranate peel extract for postharvest preservation of pomegranate arils

This study investigated the properties of alginate-cellulose nanofiber (AL-CNF) bio-composite coatings functionalized with pomegranate peel extract powder (PPEP) at 0.1, 0.3, and 0.5 % (w/v) and their effects on the postharvest shelf life of pomegranate arils stored at 5 °C and 95 ± 2 % RH for 15 days. The results demonstrated that PPEP incorporation enhanced the physical, functional, and antioxidant properties of the coatings while reducing their mechanical strength. Microstructural analysis revealed that CNF contributed to a rougher surface, whereas PPEP addition improved homogeneity and smoothness. The 0.5 % PPEP concentration exhibited the highest thickness, antioxidant activity, and phenolic content. Application of AL-CNF bio-composite coatings significantly (p < 0.05) reduced weight loss, delayed respiration, and maintained firmness compared to the control. PPEP incorporation increased total soluble solids (TSS) and preserved the visual quality of arils. Additionally, 0.5 % PPEP retained higher phenolic content, anthocyanin levels, and DPPH activity while reducing microbial growth. These findings suggest that AL-CNF nanocomposite coatings enriched with PPEP (0.1-0.5 %) effectively preserve quality and extend the shelf life of minimally processed pomegranate arils, offering a sustainable postharvest preservation strategy.

Kombucha as a Solvent for Chitosan Coatings: A New Strategy to Extend Shelf Life of Red Peppers

Plastic pollution and environmental degradation necessitate the development of natural, biodegradable food preservation materials. This study examined chitosan-based film-forming solutions using kombucha derived from black tea, lemon balm, and chamomile as natural solvents rich in bioactive compounds. Lemon balm kombucha solutions were used to create chitosan films and coat red peppers. The study assessed the mechanical properties of the films and the effects of chitosan coating on peppers, including texture, ascorbic acid content, sensory attributes, and antioxidant activity. Microbiological tests showed that a chitosan-lemon balm kombucha solution acted against Escherichia coli, Pseudomonas aeruginosa and Salmonella enterica. Lemon balm kombucha had high total phenolic (381.67 µg GAeq/mL) and flavonoid (21.05 µg Qeq/mL) contents. The chitosan film exhibited a tensile strength of 11.08 MPa and an elongation at break of 53.45%. The water vapor transmission rate of the obtained chitosan film was 131.84 g/m2·24 h. Coated peppers showed a 32% increase in skin strength and retained 11% more ascorbic acid after 15 days. Sensory evaluation revealed no significant differences from controls. These results highlight lemon balm kombucha as a promising natural solvent for chitosan coatings, which have the potential to extend red pepper shelf life and to support food preservation.

Comprehensive characterization of biodegradable edible films activated with rose and marigold extracts and application of active edible coatings to extend the postharvest storage life of guava

This study investigated the physical, mechanical, optical, thermal, and biochemical characters of carboxy methyl cellulose (CMC) and gum arabic (GA) based active edible films activated with rose leaf (RL) and marigold petal (MP) extracts, their impact on the shelf life and postharvest quality of guava fruits when stored under cold condition (10 ± 1 °C). Physical, mechanical and optical characteristics were enhanced by the incorporation of plant extracts. Water solubility of films decreased upon addition of plant extracts, with MP extract films showing the lowest solubility. Water vapor transmission rate (WVTR) lowered when plant extracts were added, lowest for RL extract incorporation (50.35, 8.78 g/m2/day) when compared to pure forms (66.58, 15.97 g/m2/day) for CMC and GA, respectively. Thermogravimetric analysis results revealed increased residue content in CMC + MP films and lower residue in CMC + RL films above 300 °C. FTIR analysis demonstrated interactions between CMC hydroxyl groups and plant extract components, with broad OH and CH stretching peaks. When applied to guava fruits, the shelf life was extended up to 18 days for GA + RL, CMC + MP, and CMC + RL coatings. CMC + RL coated fruits retained higher weight retention percentage (91.03 %) and showed lower ethylene production rates along with enhanced biochemical properties. Antioxidant activity (DPPH) was better preserved in coated fruits, with CMC + RL being the most effective. PME and APX enzyme activities were lower in active-coated fruits. CMC + RL coatings outperformed all other coating formulations in maximizing storage life (18 days) and maintaining quality attributes with lowest ripening index (35.93) and total colour difference (82.80).

Gum tragacanth, a novel edible coating, maintains biochemical quality, antioxidant capacity, and storage life in bell pepper fruits

Bell pepper fruits (Capsicum annuum L.) are prone to both physiological and pathological deterioration following harvest, primarily due to their high metabolic activity and water content. The storage of bell peppers presents several challenges, including weight loss, softening, alterations in fruit metabolites and color, increased decay, and a decline in marketability. The application of edible coatings (ECs) is one of the environmentally friendly technologies that improves many post-harvest quantitative and qualitative characteristics of products. This research investigated the impact of different levels of gum tragacanth (GT) coating (0, 0.25, 0.5, 1, and 2%) on the physiological and biochemical traits of stored bell pepper fruits (BPFs) (8 ± 1°C, 90-95% RH) for 28 days. The results showed the positive effect of coating treatments with higher concentrations of GT, up to 1%. Increasing the concentration of GT to 2% decreased the marketability and quality characteristics of fruits compared to 1% GT. After storage, the physiological weight loss of the fruits treated with 1% GT (10.46%) was lower than that of the uncoated fruits (18.92%). Furthermore, the coated fruits (1% GT) had more firmness, total phenol content, ascorbic acid, and titratable acidity content than uncoated fruits during storage. At the end of storage, the coated BPFs with 1% GT showed higher SOD (97.02 U g-1), CAT (24.38 U g-1) and POD (0.11 U g-1) activities and antioxidant capacity (81.74%) as compared to other treatments. Total soluble solids, total carbohydrates, total carotenoids, pH, malondialdehyde, and electrolyte leakage content increased in coated fruit during storage but were significantly lower than in uncoated fruits. Moreover, the samples coated with GT (1%) maintained good marketability (about 75%), while the marketability of the control (about 40%) was unacceptable. The study shows that GT (1%) coating can be a promising novel treatment option for increasing the storage quality of BPFs.

Improving fresh-cut fruit salad quality and longevity with chitosan coating enriched with poppy seed phenolics

This innovative study introduces the application of a 5% (v/v) poppy seed phenolic extract-infused edible chitosan coating on fresh-cut fruit salads (comprising apple, pineapple, pomegranate, and kiwi) stored at +4°C for 12 days. Non-coated samples experienced notable changes: 4.30% weight loss, 25% decay, pH level at 3.59, titratable acidity of 0.18%, and browning index of 1.71. In contrast, fruit salads coated with chitosan-poppy seed phenolic extract exhibited significant improvements: weight loss reduced to 3.10%, decay limited to 3.13%, pH increased to 3.76, titratable acidity enhanced to 0.20%, and browning index notably decreased to 0.33. Soluble solids ranged from 11.83 to 14.71, L* from -8.13 to 18.64, a* from -1.85 to 22.35, and b* from 8.26 to 27.89 in non-coated salads. Adding poppy seed phenolic extract to the coated fruits slightly expanded these ranges. Sensory evaluations consistently rated non-coated samples between 1 and 3, while the coated samples received higher ratings between 6 and 7. These assessments consistently highlighted enhanced attributes, including intensified aroma, enriched color, improved taste, texture, and overall acceptability. Moreover, incorporating poppy seed phenolic extract amplified sensory qualities and significantly improved microbial safety (<106 CFU/g). In summary, the chitosan-based coating, enriched with poppy seed phenolic extract, effectively extended the shelf life of fresh-cut fruit salads. This integrated approach preserves key attributes, ensures microbial quality, and enhances the sensory characteristics of these products. The study's results emphasize its potential as a pivotal innovation in food preservation by providing specific and tangible outcomes.

Preparation of Fresh-Keeping Paper Using Clove Essential Oil through Pickering Emulsion and Maintaining the Quality of Postharvest Cherry Tomatoes

This study focused on developing a Pickering emulsion fresh-keeping paper that contained clove essential oil (CEO). Cherry tomatoes served as the test material for assessing the preservative efficacy of fresh-keeping paper. The results showed that Pickering emulsion had strong stability. Additionally, the fresh-keeping paper had a good antioxidant activity and sustained-release effect on CEO. In terms of the preservation effect, 0.75 wt% CEO Pickering emulsion paper reduced the decay incidence and weight loss of cherry tomatoes during 12-day storage. Fresh-keeping paper could also play a positive role in protecting the sensory index and color difference of tomatoes. It slowed the decline rate of soluble solid concentration (SSC) and titrable acid (TA). The vitamin C (Vc) and hardness of preserved tomatoes using fresh-keeping paper were maintained at a high level. The paper also inhibited the growth of microorganisms significantly. Therefore, 0.75 wt% CEO Pickering emulsion fresh-keeping paper displayed considerable potential for application in the preservation of postharvest fruits and vegetables. It is a novel fruit and vegetable preservation material worthy of development.

Active pullulan-based coatings incorporated with Auricularia auricular extracts for preserving potato fresh-cuts

In the present study, Auricularia auricular polysaccharides (AAP) and Auricularia auricular proteins (AAPR) obtained from the waste products of Auricularia auricular were incorporated into pullulan (PUL) to obtain active packaging films/coatings. Results showed that incorporating AAP/AAPR into PUL-based films decreased their transparency, but increased the compactness, thermal stability, antioxidant, and antimicrobial properties. Adding 2% PUL films with 10%:10% of AAP/AAPR exhibiting good mechanical properties were applied to fresh-cut potatoes to avoid spoilage during eight days of storage, with significantly decreased in browning index, weight loss, microbial growth prevention and the total soluble solids was maintained. These results substantiated that pullulan containing AAP/AAPR as an active film/coating with antioxidant and antimicrobial properties has significant potential for maintaining safety and quality of fresh-cut potatoes and extending their shelf life.

Exploring the potential of pullulan-based films and coatings for effective food preservation: A comprehensive analysis of properties, activation strategies and applications

Pullulan is naturally occurring polysaccharide exhibited potential applications for food preservation has gained increasing attention over the last half-century. Recent studies focused on efficient preservation and targeted inhibition using active composite ingredients and advanced technologies. This has led to the emergence of pullulan-based biofilm preservation. This review extensively studied the characteristics of pullulan-based films and coatings, including their mechanical strength, water vapor permeability, thermal stability, and potential as a microbial agent. Furthermore, the distinct characteristics of pullulan, production methods, and activation strategies, such as pullulan derivatization, various compounded ingredients (plant extracts, microorganisms, and animal additives), and other technologies (e.g., ultrasound), are thoroughly studied for the functional property enhancement of pullulan-based films and coatings, ensuring optimal preservation conditions for diverse food products. Additionally, we explore hypotheses that further illuminate pullulan's potential as an eco-friendly bioactive material for food packaging applications. In addition, this review evaluates various methods to improve the efficiency of the film-forming mechanism, such as improving the direct coating process, bioactive packaging films, and implementing layer-by-layer coatings. Finally, current analyses put forward suggestions for future advancement in pullulan-based bioactive films, with the aim of expanding their range of potential applications.

Effect of guar gum-chitosan composites edible coating functionalized with essential oils on the postharvest shelf life of Khasi mandarin at ambient condition

In the present study, the effects of guar gum (0.7 %):chitosan (0.3 %) based composite edible coating functionalized with coconut oil and essential oils like clove bud oil and cinnamon bark oil were investigated on the postharvest shelf life of Khasi mandarins at ambient conditions (25 ± 5 °C, RH 75 ± 5 %) up to 20 days of storage period. The postharvest characteristics such as weight loss, firmness, acidity, total soluble solids (TSS) and reducing sugar of control and treated fruits were evaluated at 5 days intervals throughout the storage period. The obtained results indicated that the application of guar gum/chitosan-based composite edible coating with coconut oil, clove bud and cinnamon bark essential oil was effective in prolonging the postharvest shelf life of Khasi mandarins as compared to control fruits by minimizing the decay and loss of postharvest quality attributes. The treatment of composite such as guar gum/chitosan/coconut oil/clove oil/cinnamon oil (GGCsC-Cl-Cn) was most effective in maintaining postharvest characteristics of fruits compared to other treatments and control. The significant (p < 0.05) lowest weight loss (38 %) with retention of higher firmness (5.9 N), titratable acidity (0.29 %), and total soluble solid (10.8 %) was noticed in the Khasi mandarins treated with GGCsC-Cl-Cn composite coating on 20 days of storage. Furthermore, the present study confirmed the significance of the developed composite formulation in improving the shelf life of Khasi mandarin.

Development and characterization of pomegranate peel extract-functionalized jackfruit seed starch-based edible films and coatings for prolonging the shelf life of white grapes

In the current research, the pomegranate peel extract of varying concentrations (0.02, 0.04, 0.06, 0.08, and 0.1 g/mL) were incorporated into jackfruit seed starch (5 % w/w) based edible films and coatings for the evaluation their effects on the mechanical, physical, barrier and thermal properties. Furthermore, the effects of the optimized edible coating were investigated on the postharvest shelf life of white grapes at room storage (30 ± 5 °C, RH = 70 ± 5 %) conditions for up to 8 days. The obtained results showed a significant increment in thickness (p ≤ 0.05) with higher concentration (0.1 g/mL) of pomegranate peel extract (PPE), total phenolic content (959.33 ± 43.36 mg/100 g) and antioxidant activity (87.35 ± 1.64 %) of the prepared edible films but have negative impacts on the water vapor permeability (2.82 × 10-6 ± 6.48 × 10-7 g-1h-1pa-1) and oxygen permeability (1.62 × 10-14 ± 9.32 × 10-15 cm3·cm/cm2·s·cmHg), solubility (23.24 ± 3.21 %), and tensile strength (1.60 ± 0.43 MPa). The edible film enriched with 0.4 g/mL of PPE showed higher thermal stability in terms of glass transition temperature (98.2 ± 0.21 °C) and peak temperature (110.3 ± 0.35 °C). Additionally, the application of coating treatment significantly maintains the postharvest shelf life of white grapes throughout the storage period.

Recent advances in edible coatings and their application in food packaging

The food packaging industries are facing the challenge of food waste generation. This can be addressed through the use of edible coating materials. These coatings aid in extending the shelf life of food products, reducing waste. The key components of these coatings include food-grade binding agents, solvents, and fillers. The integration of polysaccharide, protein, lipids, bioactive and composite-based materials with edible coating matrix aids to combat substantial post-harvest loss of highly perishable commodities and elevates the quality of minimally processed food. The aim of this review is to introduce the concept of edible coatings and discuss the different coating materials used in the food industry, along with their properties. Additionally, this review aims to classify the coating types based on characteristic features and explore their application in various food processing industries. This review provides a comprehensive overview of edible coatings, including the integration of polysaccharides, proteins, lipids, bioactive, and composite-based materials into the coating matrix. This review also addresses the significant post-harvest loss of highly perishable commodities and emphasizes the enhancement of quality in minimally processed food. Furthermore, the antimicrobial, anti-corrosive, and edible characteristics are highlighted, showcasing their potential applications in different food packaging industries. Moreover, it also discusses the challenges, safety and regulatory aspects, current trends, and future perspectives, aiming to shed light on the commercialization and future investigation of edible coatings.

Control of release in active packaging/coating for food products; approaches, mechanisms, profiles, and modeling

Antimicrobial or antioxidant active packaging (AP) is an emerging technology in which a bioactive antimicrobial or antioxidant agent is incorporated into the packaging material to protect the contained product during its shelf life from deterioration. The important issue in AP is making a balance between the deterioration rate of the food product and the controlled release of the bioactive agent. So, the AP fabrication should be designed in such a way that fulfills this goal. Modeling the controlled release is an effective way to avoid trial and error and time-consuming experimental runs and predict the release behavior of bioactive agents in different polymeric matrices and food/food simulants. To review the release of bioactive compounds from AP, in the first part of this review we present an introductory explanation regarding the release controlling approaches in AP. Then the release mechanisms are explained which are very important in defining the appropriate modeling approach and also the interpretation of the modeling results. Different release profiles that might be observed in different packaging systems are also introduced. Finally, different modeling approaches including empirical and mechanistic techniques are covered and the recent literature regarding the utilization of such approaches to help design new AP is thoroughly studied.

Genetic Regulation, Environmental Cues, and Extraction Methods for Higher Yield of Secondary Metabolites in Capsicum

Capsicum (chili pepper) is a widely popular and highly consumed fruit crop with beneficial secondary metabolites such as capsaicinoids, carotenoids, flavonoids, and polyphenols, among others. Interestingly, the secondary metabolite profile is a dynamic function of biosynthetic enzymes, regulatory transcription factors, developmental stage, abiotic and biotic environment, and extraction methods. We propose active manipulable genetic, environmental, and extraction controls for the modulation of quality and quantity of desired secondary metabolites in Capsicum species. Specific biosynthetic genes such as Pun (AT3) and AMT in the capsaicinoids pathway and PSY, LCY, and CCS in the carotenoid pathway can be genetically engineered for enhanced production of capsaicinoids and carotenoids, respectively. Generally, secondary metabolites increase with the ripening of the fruit; however, transcriptional regulators such as MYB, bHLH, and ERF control the extent of accumulation in specific tissues. The precise tuning of biotic and abiotic factors such as light, temperature, and chemical elicitors can maximize the accumulation and retention of secondary metabolites in pre- and postharvest settings. Finally, optimized extraction methods such as ultrasonication and supercritical fluid method can lead to a higher yield of secondary metabolites. Together, the integrated understanding of the genetic regulation of biosynthesis, elicitation treatments, and optimization of extraction methods can maximize the industrial production of secondary metabolites in Capsicum.

Quality Attributes of Cold-Stored Khalal Barhi Dates Treated with Guava Leaf Extract and/or Lactic Acid as Natural Preservatives

The use of natural ingredients to preserve the quality of fresh fruits is a promising approach to healthier products and a more sustainable industry. The present study was carried out to assess the effect of lactic acid (LA) and guava leaf extract (GLE) as natural preservatives on the quality parameters of Khalal Barhi dates. Physicochemical properties, antioxidant activity, color parameters, firmness, sensory properties, and yeast and mold counts of date fruits were evaluated during five weeks of storage at 4 ± 1 °C. The bioactive compounds in GLE were estimated by HPLC, which exhibited that GLE contains significant amounts of bioactive compounds, mainly, phenolics and flavonoids. With prolonged storage, the moisture content decreased, while the total soluble solids (TSS) increased in all samples. Similarly, a slight decrease in the pH with a concomitant increase in titratable acidity (TA) was observed throughout the storage. Generally, the samples treated with natural preservatives revealed lower changes in moisture content, TSS, pH, and TA than the control. The results exhibited decreased total phenolic content (TPC) and antioxidant activity for all samples with extended storage. The GLE and LA + GLE treatments significantly (p < 0.05) increased TPC and antioxidant activity on day 0 and preserved higher values of both during storage. Additionally, a decrease in the L* and b* values with an increase in the a* values of all samples was observed with advancement of storage. The LA + GLE treatment minimized the changes in color parameters and maintained higher firmness values during storage. Similarly, the sensory properties of all samples decreased with prolonged storage, but insignificant (p > 0.05) differences were found among the samples. Dipping treatments inhibited microbial growth over time, with the lowest yeast and mold counts achieved by the LA + GLE treatment. It can be concluded that the LA + GLE treatment has a protective effect on Khalal Barhi dates by minimizing post-harvest changes and decreasing the microbial load.

Advances in formulation, functionality, and application of edible coatings on fresh produce and fresh-cut products: A review

With the increasing population of the world food demand is also increasing but unfortunately, many countries in the world are lacking suitable and economical postharvest preservation techniques to minimize increasing postharvest losses. To ensure food security advanced production technologies, distribution systems and minimum losses should be ensured to give accessibility of food to all population groups. Innovative preservation techniques should be adopted by the agriculture sector to meet intercontinental distribution and demand for fresh produce. The application of the edible coating is a novel technique in postharvest preservation due to its simple application, ecofriendly nature, and effectiveness. Edible coatings can also improve the quality and safety aspects of fresh produce and thus extends shelf life. This review aimed to update information about recent advances in edible coating formulation and application mainly on fresh-cut /minimally processed fruits and vegetables. This information will be helpful for processors to select the best coating material and its effective concentration for different fresh and minimal processed vegetables.

Recent advances on postharvest technologies of bell pepper: A review

The bell pepper (Capsicum annuum L.) is a commercially important horticultural crop grown in tropical and sub-tropical areas across the world. Despite this importance, it is a perishable vegetable with a limited shelf life and high disease susceptibility. Bell pepper output has expanded significantly in recent years. However, this crop is still experiencing close to 40% postharvest losses annually. Chemical fumigation for postharvest disease control of bell pepper has been shown to be efficient against fungal infections, but environmental impact and consumption hazards limit its full use. Recently, non-chemical techniques including biological and botanical methods, non-destructive technologies and Artificial intelligence have been demonstrated to be effective as postharvest management of bell pepper. The paper provides exciting information on recent and emerging techniques for curtailing these losses in bell pepper, alongside their mechanism and existing benefits. The current limitations of these techniques as well as recommendations for potential applications are also addressed.

Effects of Pomegranate Peel Extract and/or Lactic Acid as Natural Preservatives on Physicochemical, Microbiological Properties, Antioxidant Activity, and Storage Stability of Khalal Barhi Date Fruits

The use of natural preservatives in the storage of fresh fruits is a promising approach to healthier and more sustainable food processing. The current study was conducted to evaluate the effect of pomegranate peel extract (PPE) and lactic acid (LA) as natural preservatives on the shelf life of Khalal Barhi date fruits. Physicochemical properties, antioxidant activity, color parameters, texture profile, sensory characteristics, and microbiological quality of date fruits were evaluated during six weeks of cold storage (4 ± 1 °C). The bioactive compounds in PPE were determined by HPLC analysis, which showed that PPE is a rich source of bioactive compounds, particularly phenolics and flavonoids. The results exhibited decreased moisture content (from 68.36–68.43 to 62.13–63.11%) and an increased soluble solids content (from 27.16–27.24 to 31.45–33.91%) in all samples with prolonged storage. Likewise, a slight decrease in the pH (from 6.00–6.28 to 4.89–5.29) with an increase in acidity (from 0.12–0.14 to 0.23–0.27%) during storage was observed. Generally, treated samples showed lower changes in moisture content, soluble solids content, pH, and acidity than the control. A decrease in total phenolic content (TPC) (from 8.22–12.36 to 3.19–5.17 mg GAE/g) and antioxidant activity (from 44.11–68.26 to 23.84–38.52%) of all samples was observed with progressed storage, meanwhile, the treatment with PPE significantly (p < 0.05) increased TPC with a concomitant increase in antioxidant activity and maintained higher values of both throughout storage. The results exhibited a decrease in L* (from 54.87–55.92 to 41.68–45.68) and b* (from 36.25–37.09 to 23.59–25.42) values of all samples, while the a* value of all samples increased (from 1.29–1.40 to 2.22–2.43) with storage. Dipping treatment in PPE solution improved the color, exhibited the lowest change in color parameters, and maintained better texture properties during storage. Similarly, sensory properties decreased (from 8.21–8.66 to 6.71–7.21) during storage with insignificant (p > 0.05) differences among samples. Dipping treatments inhibited the growth of yeasts and molds over time, with the lowest microbial count recorded in the PPE-treated samples. It can be concluded that PPE was found to have protective effects on Khalal Barhi date fruit quality by controlling post-harvest changes and lowering the microbial load.

Effect of polyvinyl acetate (PVAc) based coating on quality characteristics of capsicum during storage

The effect of PVAc (Polyvinyl acetate) coating on various characteristics of capsicum was determined during postharvest storage at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C). Food grade PVAc was used to make different coating formulations (2.5, 5, 7.5, 10 and 12.5%) by dissolving alcohol-water mixtures. After coating, the samples were stored at room temperature (30 ± 1 °C) and refrigeration temperature (10 ± 1 °C) for a comparative study. Various physicochemical parameters viz. weight loss, TSS, acidity, chlorophyll, pH, ascorbic acid, and color were analyzed every three days of storage till spoilage. Results revealed that the physicochemical characteristics and the quality of the bell peppers were improved by coating treatments at both the storage conditions. PVAc concentrations of 10 and 12.5% performed better than other PVAc coatings in retaining the chlorophyll and water content, which ultimately increased the shelf life of capsicum without significantly affecting its green color. The coating reduced the weight loss and color change, maintained total soluble solids, titratable acidity, pH over the storage period. About 40-50% less weight loss was observed in case of higher PVAc coating concentrations (10 and 12%). Therefore, the present study results suggested that PVAc coating can maintain postharvest storage quality of capsicum at 30 ± 1 °C and 10 ± 1 °C storage conditions.

Graphical abstract

Development of Composite Edible Coating from Gelatin-Pectin Incorporated Garlic Essential Oil on Physicochemical Characteristics of Red Chili (Capsicum annnum L.)

Red chili is a climacteric fruit that still undergoes respiration after harvest. During storage, it is susceptible to mechanical, physical, and physiological damage and decay incidence, therefore a method is needed to protect it so that the quality losses can be minimized. One way this can be achieved is by applying edible coatings that can be made from hydrocolloids, lipids, or composites of both, in addition to antimicrobial agents that can also be added to inhibit microbial growth. In this study, we detail the application of an edible coating made of gelatin composite from tilapia fish skin, which has a transparent color and good barrier properties against O₂, CO₂, and lipids. To increase its physicochemical and functional qualities, it must be modified by adding composite elements such as pectin as well as hydrophobic ingredients such as garlic essential oil. This study was conducted to determine the effect of a gelatin-pectin composite edible coating (75:25, 50:50, 25:75), which was incorporated with garlic essential oil (2% and 3%) on the physicochemical properties of red chili at room temperature (±29 °C), RH ± 69%) for 14 days. The best treatment was the 50-50% pectin-gelatin composite, which was incorporated with garlic essential oil with a concentration of 2 and 3%. This treatment provided a protective effect against changes in several physicochemical properties: inhibiting weight loss of 36.36 and 37.03%, softening of texture by 0.547 and 0.539 kg/84 mm², maintaining acidity of 0.0087 and 0.0081%, maintaining vitamin C content of 2.237 and 2.349 mg/gr, anti-oxidant activity (IC₅₀) 546.587 and 524.907; it also provided a protective effect on chili colors changing to red, and retains better total dissolved solid values.

Extending the shelf life of mango (Mangifera indica L.) fruits by using edible coating based on xanthan gum and pomegranate peel extract

The effect of various concentration of xanthan gum (0.5%, 1%, and 2%) based edible coating supplemented with pomegranate peel extract (0.5 mL) on functional and physico-chemical properties of mango (Mangifera indica L.) fruits were studied during the storage period of 15 days at 22 °C. The application of xanthan gum (XG) based edible formulations with pomegranate peel extract (PPE) was found to be effective to maintain the quality attributes and characteristics like reducing weight loss, respiration rate, ethylene production, maintained total soluble solids (TSS), acidity, pH, texture property, ascorbic acid, phenols, and antioxidant activity as compared to control samples. In general, all tested formulations are effective; but edible coatings based on 2% of XG were found the most potential to prevent the postharvest characteristics of mango fruits while maintaining the quality attributes.

Potential of Low Cost Agro-Industrial Wastes as a Natural Antioxidant on Carcinogenic Acrylamide Formation in Potato Fried Chips

Acrylamide is classified as a toxic and a prospective carcinogen to humans, and it is formed during thermal process via Maillard reaction. In order to find innovative ways to diminish acrylamide formation in potato chips, several extracts of agricultural wastes including potato peels, olive leaves, lemon peels and pomegranate peels extracts were examined as a soaking pre-treatment before frying step. Total phenolic, total flavonoids, antioxidant activity, and the reduction in sugar and asparagine contents were additionally performed. Proximate composition of these wastes was found to be markedly higher in fat, carbohydrate and ash contents. Lemon peels and potato peels showed almost similar phenolic content (162 ± 0.93 and 157 ± 0.88 mg GAE /g, respectively) and exhibited strong ABTS and DPPH radical scavenging activities than the other wastes. The reduction percentage of reducing sugars and asparagine after soaking treatment ranged from 28.70 to 39.57% and from 22.71 to 29.55%, respectively. HPLC results showed higher level of acrylamide formation in control sample (104.94 mg/kg) and by using the wastes extracts of lemon peels, potato peels, olive leaves, and pomegranate peels succeeded to mitigate acrylamide level by 86.11%, 69.66%, 34.03%, and 11.08%, respectively. Thus, it can be concluded that the soaking of potato slices in the tested wastes extracts as antioxidant as pre-treatment before frying reduces the formation of acrylamide and in this way, the risks connected to acrylamide consumption could be regulated and managed.

Phenolic Compounds in Active Packaging and Edible Films/Coatings: Natural Bioactive Molecules and Novel Packaging Ingredients

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products.

Physicochemical, Morphological, and Functional Characterization of Edible Anthocyanin-Enriched Aloevera Coatings on Fresh Figs (Ficus carica L.)

In the present investigation, Aloe vera gel (AVG)-based edible coatings enriched with anthocyanin were prepared. We investigated the effect of different formulations of aloe-vera-based edible coatings, such as neat AVG (T1), AVG with glycerol (T2), Aloe vera with 0.2% anthocyanin + glycerol (T3), and AVG with 0.5% anthocyanin + glycerol (T4), on the postharvest quality of fig (Ficus carica L.) fruits under refrigerated conditions (4 °C) for up to 12 days of storage with 2-day examination intervals. The results of the present study revealed that the T4 treatment was the most effective for reducing the weight loss in fig fruits throughout the storage period (~4%), followed by T3, T2, and T1. The minimum weight loss after 12 days of storage (3.76%) was recorded for the T4 treatment, followed by T3 (4.34%), which was significantly higher than that of uncoated fruit (~11%). The best quality attributes, such as the total soluble solids (TSS), titratable acidity (TA), and pH, were also demonstrated by the T3 and T4 treatments. The T4 coating caused a marginal change of 0.16 in the fruit titratable acidity, compared to the change of 0.33 in the untreated fruit control after 12 days of storage at 4 °C. Similarly, the total soluble solids in the T4-coated fruits increased marginally (0.43 °Brix) compared to the uncoated control fruits (>2 °Brix) after 12 days of storage at 4 °C. The results revealed that the incorporation of anthocyanin content into AVG is a promising technology for the development of active edible coatings to extend the shelf life of fig fruits.

Bioplastics for Food Packaging: Environmental Impact, Trends and Regulatory Aspects

The demand to develop and produce eco-friendly alternatives for food packaging is increasing. The huge negative impact that the disposal of so-called "single-use plastics" has on the environment is propelling the market to search for new solutions, and requires initiatives to drive faster responses from the scientific community, the industry, and governmental bodies for the adoption and implementation of new materials. Bioplastics are an alternative group of materials that are partly or entirely produced from renewable sources. Some bioplastics are biodegradable or even compostable under the right conditions. This review presents the different properties of these materials, mechanisms of biodegradation, and their environmental impact, but also presents a holistic overview of the most important bioplastics available in the market and their potential application for food packaging, consumer perception of the bioplastics, regulatory aspects, and future challenges.

Pomegranate (Punica granatum L.) Peel Extracts as Antimicrobial and Antioxidant Additives Used in Alfalfa Sprouts

Aqueous and ethanolic pomegranate peel extracts (PPE) were studied as a source of phenolic compounds with antimicrobial, anti-quorum sensing, and antioxidant properties. The aqueous extract showed higher total phenolic and flavonoid content (153.43 mg GAE/g and 45.74, respectively) and antioxidant capacity (DPPH radical inhibition: 86.12%, ABTS radical scavenging capacity: 958.21 mg TE/dw) compared to the ethanolic extract. The main phenolic compounds identified by UPLC-DAD were chlorogenic and gallic acids. The aqueous PPE extract showed antimicrobial activity against Listeria monocytogenes, Salmonella Typhimurium, Candida tropicalis (MICs 19–30 mg/mL), and anti-quorum sensing activity expressed as inhibition of Chromobacterium violaceum violacein production (%). The aqueous PPE extracts at 25 mg/mL applied on alfalfa sprouts reduced psychrophilic bacteria (1.12 Log CFU/100 g) and total coliforms (1.23 Log CFU/100 g) and increased the antioxidant capacity of the treated sprouts (55.13 µmol TE/100 g (DPPH) and 126.56 µmol TE/100 g (ABTS)) compared to untreated alfalfa. This study emphasizes PPE’s antioxidant and antimicrobial activities in alfalfa sprouts preservation.

Preparation of a biodegradable chitosan packaging film based on zinc oxide, calcium chloride, nano clay and poly ethylene glycol incorporated with thyme oil for shelf-life prolongation of sweet cherry

This study includes development of chitosan-based films with incorporated essential thyme oil and different combinations of cross-linkers viz., ZnO, CaCl₂, NC, and PEG for the safe storage of sweet cherries. The resulting films stored with sweet cherries were analyzed for different physicochemical and antimicrobial properties. Incorporation of ZnO, CaCl₂, NC, and PEG in chitosan-based films maintained fruit quality by conserving higher total soluble solids, titratable acidity, and reduced weight loss. The combined ZnO + CaCl₂ + NC + PEG in chitosan-based films also suppressed microbial activity. The sensorial quality of fruits stored with CH + ZnO + CaCl₂ + NC + PEG treatment was also stable during storage. In conclusion, the combined CH + ZnO + CaCl₂ + NC + PEG with added thyme oil application is an effective approach to maintain the postharvest quality and could be an alternative to increase the shelf life of sweet cherries, besides decreasing environmental impacts of non-biodegradable packages.

Nano Coating of Aloe-Gel Incorporation Additives to Maintain the Quality of Freshly Cut Fruits

The edible coating is an environmentally friendly technology that is applied to fresh-cut fruit products. One of the natural ingredients that are potentially applicable is aloe-gel because it contains several functional components. The main advantage of aloe-coating is that additives can be incorporated into the polymer matrix to enhance its properties. Additives tend to improve the safety, nutritional, and sensory attributes of fresh fruits, but in some cases, aloe-coating does not work. Furthermore, particle size determines the effectiveness of the process on fresh-cut fruits. Aloe-gel nano-coating can be used to overcome the difficulty of adhesion on the surface of fresh-cut fruits. However, quality criteria for fresh cut fruit coated with aloe-gel nano-coating must be strictly defined. The fruit to be processed must be of minimal quality so that discoloration, loss of firmness, spoilage ratio, and fruit weight loss can be minimized. This study aims to discuss the use of nano-coating aloe-gel incorporated with additional ingredients to maintain the quality of fresh-cut fruits. It also examined the recent advances in preparation, extraction, stabilization, and application methods in fresh fruits.

Edible coating as postharvest management strategy for shelf-life extension of fresh tomato (Solanum lycopersicum L.): An overview

Tomato is considered as one of the most grown horticultural crops having a short shelf-life due to its climacteric nature of ripening, susceptibility to postharvest microbial decay, and mechanical damage, resulting in huge postharvest losses. Recently, the use of edible coatings has been seen as a promising environment friendly and sustainable technology for preserving the quality attributes and prolonging the shelf-life of tomato during storage. Although a lot of literature is available on the aspects of edible coating for fresh produce, especially stone and tropical fruits, but there is no dedicated comprehensive review that specifically addresses the requirements of edible coatings for whole fresh tomato. This review aims to provide the information about the desirable coating property requirements specific to tomato and summarizes or analyzes the recent studies conducted on the application of edible coating on tomato. The article also deals with recent trends on utilization of bioactive compounds as well as nanotechnological approaches for improving the performance and functionality of coating materials used for tomato. However, the edible coating technology for tomato is still at infancy state, and adoption of technology on a commercial scale requires economic viability and large-scale consumer acceptability.

Recent Advancements of Polysaccharides to Enhance Quality and Delay Ripening of Fresh Produce: A Review

The freshness of fruits and vegetables plays a significant role in consumers' decision to purchase a product at the supermarket. Fresh-cut products are the latest trend in fulfilling society's restless needs, and the food industry is faced with the challenge of maintaining the quality of fresh produce. The food industry is concerned with the natural maturation and degradation of fruits and vegetables, primarily due to enzymatic reactions. It has been demonstrated that polysaccharide coatings effectively preserve the freshness of these products, extending their shelf life depending on the preservation method used. This review informs readers about the different types of polysaccharides and their novel applications as natural food preservatives in the past five years (2018-2022). The key findings summarized the properties of the antimicrobial agent, the molecular mechanism of action, coating methods, and formulation for the preservation approach. Additionally, we discuss the scientific factors influencing polysaccharide processing and preservation efficacy, allowing it to be used in post-harvest management.

Synergistic effect of gum Arabic and carboxymethyl cellulose as biocomposite coating delays senescence in stored tomatoes by regulating antioxidants and cell wall degradation

This study tested a novel combination of hydrocolloid gum arabic (GA) and carboxymethyl cellulose (CMC) to extend postharvest life of tomatoes. For this purpose, tomato fruits were coated with GA 10%, CMC 0.5% and GA 10% + CMC 0.5%, and stored for 20 days at 20 °C and 90 ± 2% RH. Application of biocomposite hydrocolloid coating reduced physiological weight loss, respiration rate, ethylene production, decay percentage and stress markers viz. malondialdehyde and hydrogen peroxide. Biocomposite hydrocolloid coating inhibited change in bioactive compounds (phenolics, ascorbic acid, and lycopene), color, organic acids, soluble sugars and up-regulated enzymatic ROS scavenging mechanism in tomato fruit more than GA or CMC coating. Moreover, biocomposite coatings delayed senescence by reducing activity of cell wall degrading enzymes and maintaining cell wall fractions. Conclusively, the biocomposite coating based on GA and CMC was superior to their individual coating in prolonging ripening phase, delaying senescence and increasing the acceptability of tomato fruits for longer duration.

Single and Combined Effect of Mild-Heat Treatment and Alginate Coatings on Quality Preservation of Minimally Processed Bunching Green Onions

Bunching green onion is an Allium species that has been widely used in food flavorings and seasonings. This vegetable experiences a rapid loss of quality during storage due to physiological changes and microbial spoilage. In the current work, the single and combined effect of mild-heat treatment (55 °C for 60 s) and alginate edible coatings on the quality preservation of minimally processed bunching green onions was studied. Control and treated samples were stored at 4 °C for 15 days and examined periodically in terms of their respiration rate, weight loss, pH, soluble solids content, firmness, total polyphenol content, antioxidant activity, microbial count, decay ratio, and overall visual quality. The results showed that the combination of mild heat and alginate edible coatings was the most effective approach to slow down the respiration rate and the incidence of decay in the minimally processed bunching green onions. In addition, the treatments with alginate coating alone or combined with mild-heat treatment showed the best performance for maintaining the overall visual quality of the products during the storage.

Effect of Additives on Surface Tension, Viscosity, Transparency and Morphology Structure of Aloe vera Gel-Based Coating

Coating is a new trend for extending shelf-life and reducing postharvest damage to fruits currently. Aloe vera gel-based (AVG) coating is made by adding citric acid, ascorbic acid and potassium sorbate. The additive increases the stability of AVG coating. This research aims to determine the effect of additives on the surface tension, viscosity, transparency and morphology structure of AVG coating. The observation used a completely random design one factor with three replicates. Formulation of AVG coating uses additives involving citric acid, ascorbic acid, potassium sorbate and the mixture of additives, concentrations of 0.15%. Observations are made periodically on days 0, 5, 10 and 15. The type and concentration of additives affect the surface tension, viscosity, transparency and morphology structure of AVG coating. The best formulation of AVG coating for 15 days of storage is a mixture of additives (citric acid, ascorbic acid and potassium sorbate) with a concentration of 0.15% applied on the surface of the fruits. The best numeric value of AVG coating surface tension is 0.122 N/m, acidity 4.22, viscosity 96.03 mPa.s, color L* 19.51 and point of transparency 84.40. The combination of the three additives produced a clear, transparent white coating appearance and the potential to extend the shelf-life of fruit.

Potential of engineered nanostructured biopolymer based coatings for perishable fruits with Coronavirus safety perspectives

Fresh fruits are prioritized needs in order to fulfill the required health benefits for human beings. However, some essential fruits are highly perishable with very short shelf-life during storage because of microbial growth and infections. Thus improvement of fruits shelf-life is a serious concern for their proper utlization without generation of huge amount of fruit-waste. Among various methods employed in extension of fruits shelf-life, design and fabrication of edible nanocoatings with antimicrobial activities have attracted considerable interest because of their enormous potential, novel functions, eco-friendly nature and good durability. In recent years, scientific communities have payed increased attention in the development of advanced antimicrobial edible coatings to prolong the postharvest shelf-life of fruits using hydrocolloids. In this review, we attempted to highlight the technical breakthrough and recent advancements in development of edible fruit coating by the application of various types of agro-industrial residues and different active nanomaterials incorporated into the coatings and their effects on shelf-life of perishable fruits. Improvements in highly desired functions such as antioxidant/antimicrobial activities and mechanical properties of edible coating to significantly control the gases (O2/CO2) permeation by the incorporation of nanoscale natural materials as well as metal nanoparticles are reviewed and discussed. In addition, by compiling recent knowledge, advantages of coatings on fruits for nutritional security during COVID-19 pandemic are also summarized along with the scientific challenges and insights for future developments in fabrication of engineered nanocoatings.

Effects of Different Solvents Extractions on Total Polyphenol Content, HPLC Analysis, Antioxidant Capacity, and Antimicrobial Properties of Peppers (Red, Yellow, and Green (Capsicum annum L.))

Plants possessing various bioactive compounds and antioxidant components have gained enormous attention because of their efficacy in enhancing human health and nutrition. Peppers (Capsicum annuum L.), because of their color, flavor, and nutritional value, are considered as one of the most popular vegetables around the world. In the present investigation, the effect of different solvents extractions (methanol, ethanol, and water) and oven drying on the antioxidant and antimicrobial properties was studied of red, yellow, and green peppers. The green pepper water extract showed the highest total polyphenol content (30.15 mg GAE/g DW) followed by red pepper water extract (28.73 mg GAE/g DW) and yellow pepper water extract (27.68 mg GAE/g DW), respectively. The methanol extracts of all the pepper samples showed higher TPC as compared to the ethanol extract. A similar trend was observed with the total flavonoid content (TFC). The antioxidant assays (DPPH scavenging and reducing power) echoed the findings of TPC and TFC. In both antioxidant assays, the highest antioxidant activity was shown by the water extract of green pepper, which was followed by the water extract of red pepper and yellow pepper. Furthermore, all extracts were assessed for their potential antimicrobial activity against bacterial and fungal pathogens. Aqueous extracts of all three pepper samples exhibited slightly higher inhibition zones as compared to their corresponding ethanolic and methanolic extract. Minimum inhibitory concentration (MIC) values ranged from 0.5 to 8.0 mg/ml. The lowest MIC values ranging from 0.5 to 2.0 mg/ml concentration were recorded for aqueous extracts of green pepper. High-performance liquid chromatography (HPLC) analysis revealed tannic acid as the major phenolic compound in all three pepper samples. Thus, it is envisaged that the microwave drying/heating technique can improve the antioxidant and antimicrobial activity of the pepper.

Fabrication and characterization of an economical active packaging film based on chitosan incorporated with pomegranate peel

Antioxidant and antimicrobial chitosan (CS) films incorporated with different concentrations (0, 3, 6 and 9% w/w based on chitosan) of pomegranate peel powder (PPP) were prepared through a simple and low-cost process and characterized. The physicochemical property, antioxidant and antibacterial properties of the films were investigated. Results showed that incorporation with PPP increased the thickness, water solubility (WS), water vapor permeability (WVP), opacity and total phenolic content (TPC) of chitosan films, but decreased the moisture content (MC) and mechanical property. Fourier transform infrared (FTIR) spectroscopy indicated the formation of hydrogen bonds between chitosan and PPP. In addition, scanning electron microscopy (SEM) analysis presented that microstructural attributes of chitosan film changed by enriching with pomegranate peel. The films with concentrations of PPP at 6 and 9% presented great ultraviolet-visible light barrier properties. Moreover, the antioxidant ability of films with PPP was significantly increased compared to the chitosan film. The addition of PPP also promoted the antibacterial capacity of the control film. These results revealed that incorporation of PPP in chitosan film could fabricate an economical active film with antioxidant and antibacterial properties, and which had the potential for developing food-grade packaging material.

Latest Developments in Edible Coatings on Minimally Processed Fruits and Vegetables: A Review

The food industry nowadays is facing new challenges in terms of sustainability and health implications of packaging and processing techniques. Due to their desire for new and natural products coupled with changes in lifestyle, consumers are looking for food products that have been less processed but possess longer shelf life and maintain nutritional and sensorial proprieties during storage. These requirements represent real challenges when dealing with highly perishable food products, such as fruits and vegetables. Thus, in recent years, edible coatings have been intensively developed and studied because of their capacity to improve the quality, shelf life, safety, and functionality of the treated products. Edible coatings can be applied through different techniques, like dipping, spraying, or coating, in order to control moisture transfer, gas exchange, or oxidative processes. Furthermore, some functional ingredients can be incorporated into an edible matrix and applied on the surface of foods, thus enhancing safety or even nutritional and sensory attributes. In the case of coated fruits and vegetables, their quality parameters, such as color, firmness, microbial load, decay ratio, weight loss, sensorial attributes, and nutritional parameters, which are very specific to the type of products and their storage conditions, should be carefully monitored. This review attempts to summarize recent studies of different edible coatings (polysaccharides, proteins, lipids, and composites) as carriers of functional ingredients (antimicrobials, texture enhancers, and nutraceuticals) applied on different minimally processed fruits and vegetables, highlighting the coating ingredients, the application methods and the effects on food shelf life and quality.

Effect of Chitosan–Pullulan Composite Edible Coating Functionalized with Pomegranate Peel Extract on the Shelf Life of Mango (Mangifera indica)

The polysaccharide based composite biomaterial (coating) used in preserving fruits and vegetables during storage is attracting increased attention as it is biodegradable material that prolongs shelf life. In the present investigation, chitosan–pullulan (50:50) composite edible coating was prepared with pomegranate peel extract (0.02 g/mL) as an active antioxidant agent. The effect of treatment with pomegranate peel extract enriched chitosan–pullulan composite edible coating on the shelf life of mango fruits during 18 days of storage period at room (23 °C) and cold (4 °C) temperature was evaluated. Results of the present study demonstrated that the application of chitosan–pullulan composite edible coating significantly (p ≤  0.05) influences the storage life of mango fruits at both storage temperatures. The chitosan–pullulan composite edible coating reduced the physiological loss in weight (PLW), and maintained total soluble solids (TSS), acidity and pH of coated mango fruits as compared to the control. In addition, fruit sensory quality such as freshness, color, taste and texture were also retained by the treatment. Furthermore, sustained firmness, phenolic content and antioxidant activity confirmed the effectiveness of the pomegranate peel extract enriched chitosan–pullulan composite edible coating on mango fruits. The phenolic, flavonoid and antioxidant activity of coated fruits were retained by pomegranate peel rich edible coating. Therefore, the chitosan–pullulan (50:50) combination with pomegranate peel extract can be used as an alternative preservation method to prolong the shelf life of mango fruits at room and cold storage conditions. However, more in-depth studies are required at farm and transit level without affecting the postharvest quality of mango fruits, providing more revenue for farmers and minimizing postharvest losses.

Effects of Conventional and Bokashi Hydroponics on Vegetative Growth, Yield and Quality Attributes of Bell Peppers

Due to consumers' awareness and concern about nutrition and health in different parts of the world, the adoption of organic hydroponics is increasing. This has led to a search for organic nutrient media. One of the viable nutrient sources for organic hydroponics is bokashi compost. The principal objective of this study was to compare the performance of 10% bokashi hydroponics with convention hydroponics for bell pepper production. The different hydroponics influenced vegetative growth parameters largely due to considerable differences in the mineral elements in both hydroponic systems. Stems of conventionally grown plants were significantly (p ≤ 0.05) thicker (10.2 mm) compared to those of the bokashi grown plants (7.3 mm). Conventionally grown plants had significantly (p ≤ 0.05) higher photosynthetic performance than bokashi grown plants; normalized difference vegetation index (NDVI) (78.80 versus 67.49), soil plant analysis development (SPAD; 73.89 versus 38.43), and quantum yield (QY; 0.64 versus 0.49). Leaf superoxide dismutase (SOD) activity in the leaves of bokashi grown plants (0.32 units/mg protein) was significantly (p ≤ 0.05) lower than in the leaves of conventionally grown plants (0.37 units/mg protein). This also corresponded to significantly (p ≤ 0.05) higher leaf sap content in the conventionally grown plant than bokashi grown plants. Furthermore, conventional hydroponics yielded three-fold greater pepper fruit per plant compared to bokashi. After 14 days of storage at 7 °C and 95% relative humidity, the firmness of both groups declined, especially for the bokashi grown fruit (27.73 shore unit), which was significantly lower compared to conventionally grown fruit (35.65 shore unit). However, there was an increase in carotenoid content in fruit grown in both hydroponic systems after storage. In conclusion, although bell pepper plant was successfully cultivated in bokashi hydroponics, the plant performance, fruit yield and postharvest quality were lower than conventional hydroponics. We believe that this study and its approach will provide future research with baseline information on optimizing media of bokashi hydroponics to produce bell pepper.

Advances in the application of chitosan as a sustainable bioactive material in food preservation

Chitosan is obtained from chitin and considered to be one of the most abundant natural polysaccharides. Due to its functional activity, chitosan has received intense and growing interest in terms of applications for food preservation over the last half-century. Compared with earlier studies, recent research has increasingly focused on the exploration of preservation mechanism as well as the targeted inhibition with higher efficiency, which is fueled by availability of more active composite ingredients and integration of more technologies, and gradually perceived as "chitosan-based biofilm preservation." In this Review, we comprehensively summarize the potential antimicrobial mechanisms or hypotheses of chitosan and its widely compounded ingredients, as well as their impacts on endogenous enzymes, oxidation and/or gas barriers. The strategies used for enhancing active function of the film-forming system and subsequent film fabrication processes including direct coating, bioactive packaging film and layer-by-layer assembly are introduced. Finally, future development of chitosan-based bioactive film is also proposed to broaden its application boundaries. Generally, our goal is that this Review is easily accessible and instructive for whose new to the field, as well as hope to advance to the filed forward.