Effects of UVC light-emitting diodes on microbial safety and quality attributes of raw tuna fillets

A Review of Non-Thermal Interventions in Food Processing Technologies

Foodborne pathogens and spoilage microorganisms continue to be a concern throughout the food industry. As a result, these problematic microorganisms are the cause of foodborne outbreaks, foodborne illness, and premature spoilage related issues. To address these, thermal technologies have been applied and have a documented history of controlling these microorganisms. Although beneficial, some of these technologies may result in adverse quality effects that can interfere with consumer acceptability. Processors of fresh produce also need technologies to mitigate pathogens with the ability to retain raw quality. In addition, thermal technologies can also result in the reduction or depletion of key nutrients. Consumers of today are health conscious and are concerned with key nutrients in food products necessary for their overall health; this reduction and depletion of nutrients could be considered unacceptable in the eyes of consumers. As a result of this, the food industry works to increase the use of non-thermal technologies to control pathogens and spoilage microorganisms in varying sections of the industry. This review paper will focus on the control of foodborne pathogens and spoilage organisms along with effects on quality in various food products by use of pulsed electric field, pulsed light, ultraviolet light, ozonation, cold atmospheric plasma, ultrasound, and ionizing radiation.

Effect of Ultraviolet-C (UV-C) Irradiation on Foodborne Pathogen Inactivation in Prosciutto and Changes on Its Physicochemical Properties

Ready-to-eat sliced prosciutto samples were treated with ultraviolet (UV) light (wavelength: 265 and 275 nm/intensity: 10 and 50 mW) after inoculation with hepatitis E virus (HEV), Escherichia coli O157:H7, or Listeria monocytogenes. The parameters of prosciutto quality assessed were color, texture, pH, water content, water holding capacity, oxidative rancidity, and freshness. The prosciutto sample under UV-C light was influenced on changes of color, lipid oxidation, and protein oxidation due to free radical generation. UV-C light reduced E. coli O157:H7 and L. monocytogenes counts by up to 2.23 Log and 1.85 Log colony forming units/g, respectively. The amount of HEV was also significantly reduced after treatment (p<0.05). HEV was no longer detected after 10 min of treatment at an intensity of 50 mW. Consequently, UV-C treatment above 265 nm at 50 mW for 10 min is an effective strategy for maintaining product quality and improving food safety. The results of this study advance the application of non-thermal food preservation.

Foodborne spore-forming bacteria: Challenges and opportunities for their control through the food production chain

Foodborne spore-forming bacteria represent a significant challenge within the food production chain due to their widespread occurrence and resistance to various processing methods. In addition to their role in food spoilage, these bacteria exhibit pathogenic properties, posing risks to public health. A comprehensive understanding of the impact of unit operations along the food production continuum, from farm or field to fork, is essential for ensuring both the safety and quality of food products. This chapter explores the factors influencing the growth, inactivation, and persistence of these bacteria, as well as the challenges and opportunities for their control. The discussion encompasses preventive measures, control strategies at the farm and field levels, and processing operations, including both thermal and non-thermal methods. Post-processing controls, such as storage and distribution practices, are also addressed. Furthermore, consumer behavior, education, and lessons learned from past outbreaks and product recalls contribute to a broader understanding of how to manage spore-forming bacteria within the food production chain. By assessing and quantifying the effects of each processing step, it becomes possible to implement effective control measures, thereby ensuring microbiological safety and enhancing the quality of food products.

LED induced non-thermal preservation of muscle foods: A systematic review

LED technology has emerged as a promising non-thermal preservation method for highly perishable muscle foods like meat and fish. Muscle foods are most susceptible to spoilage due to their high moisture content and nutrient density, which create an ideal environment for microbial growth, chemical oxidation, and enzymatic activity, which negatively alter their quality. LED treatment offers an effective solution by significantly reducing microbial loads and extending shelf life without adversely affecting sensory and nutritional properties. Specific wavelengths of LED light induce microbial inactivation through mechanisms like DNA damage, lipid oxidation, and protein alteration. Studies have shown that LED treatment can preserve the fresh-like quality of muscle foods by mitigating common spoilage processes. The advantages of LED technology include its non-thermal nature, ability to integrate with other preservation methods, and controllability in terms of intensity and wavelength. This enables for tailored applications based on food type and spoilage risks. As consumer demand grows for safe, chemical-free food options, LED technology addresses this need while enhancing food safety and quality. Further research is encouraged to optimize LED applications in various muscle food preservation contexts. With its exceptional ability to produce DNA damage in bacteria, inactivate enzymes, and malfunction biological activities, LED could serve as an inexpensive processing intervention to safeguard the quality of meat and seafood products. This review underscores the potential of LED technology as a promising alternative to traditional preservation methods for decontamination of muscle food.

Exploring the significance of emerging blue food processing technologies for sustainable development

Blue food processing applies to the production and processing of fish, algae, and other aquatic organisms for human consumption. As the global population grows and consumer demand for protein-rich foods increases, there is increased interest in exploring a wide range of innovative approaches for processing blue foods in ways that improve the efficiency, sustainability, and nutritional quality of these products and reduce the environmental impact of their production. Existing approaches to process blue foods including fishing and aquaculture for production and manual processing at landing are not sufficiently scalable, efficient, or environmentally sustainable for today's global needs. Therefore, many new technologies are being developed and implemented to address these challenges. These technologies include advanced processing technologies such as high-pressure processing, freeze drying, and ultrasound-assisted extraction. New ingredients and additives that can enhance the nutritional and sensory qualities of blue food products, such as seaweed or algae-based antioxidants. Leading edge processing methods are increasing yields, speeding up production while enhancing product quality. The foundation is being established for the large-scale production of diverse, sustainable, nutritious blue food products. These foods will match the taste and appeal of traditional foods, but with quicker, more equitable production and broader economic, social, and environmental benefits, ensuring a consistent supply for the future. Evolution of blue food processing methods and a comparative analysis have been discussed in this review article.

Gelatin-chitosan interactions in edible films and coatings doped with plant extracts for biopreservation of fresh tuna fish products: A review

The preservation of tuna fish products, which are extremely perishable seafood items, is a substantial challenge due to their instantaneous spoilage caused by microbial development and oxidative degradation. The current review explores the potential of employing chitosan-gelatin-based edible films and coatings, which are enriched with plant extracts, as a sustainable method to prolong the shelf life of tuna fish products. The article provides a comprehensive overview of the physicochemical properties of chitosan and gelatin, emphasizing the molecular interactions that underpin the formation and functionality of these biopolymer-based films and coatings. The synergistic effects of combining chitosan and gelatin are explored, particularly in terms of improving the mechanical strength, barrier properties, and bioactivity of the films. Furthermore, the application of botanical extracts, which include high levels of antioxidants and antibacterial compounds, is being investigated in terms of their capacity to augment the protective characteristics of the films. The study also emphasizes current advancements in utilizing these composite films and coatings for tuna fish products, with a specific focus on their effectiveness in preventing microbiological spoilage, decreasing lipid oxidation, and maintaining sensory qualities throughout storage. Moreover, the current investigation explores the molecular interactions associated with chitosan-gelatin packaging systems enriched with plant extracts, offering valuable insights for improving the design of edible films and coatings and suggesting future research directions to enhance their effectiveness in seafood preservation. Ultimately, the review underscores the potential of chitosan-gelatin-based films and coatings as a promising, eco-friendly alternative to conventional packaging methods, contributing to the sustainability of the seafood industry.

The role of ultraviolet radiation in the flavor formation during drying processing of Pacific saury (Cololabis saira)

BACKGROUND

Traditional sun-drying aquatic products are popular and recognized by customers, owing to their unique flavor and long-term preservation. However, the product quality and production efficiency cannot be guaranteed. Cololabis saira is rich in unsaturated fatty acids, which are susceptible to hyperoxidation during the drying process. This study aimed to make clear the role of ultraviolet (UV) radiation in flavor formation during drying processes of Cololabis saira to develop a modern drying technology.

RESULTS

Lipid oxidation analysis revealed that moderate hydrolytic oxidation occurred in the UV-assisted cold-air drying group due to the combined influence of UV and cold-air circulation, resulting in the thiobarbituric acid reactive substances value being higher than that of cold-air drying group but lower than the natural drying group. Hexanal, heptanal, cis-4-heptenal, octanal, nonanal, (trans,trans)-2,4-heptadienal, (trans,trans)-2,6-nonanedial, 1-octen-3-ol, heptanol, 2,3-pentanedione, 3,5-octadien-2-one and trimethylamine were identified as the characteristic flavor odor-active compounds present in all Cololabis saira samples. Yet, during the natural drying process, sunlight promoted the lipid oxidation, resulting in the highest degree of lipid oxidation among three drying methods. Light and heat promoted lipid oxidation in Cololabis saira prepared through natural drying process, leading to a large accumulation of volatile compounds, such as 3-methylbutyraldehyde, 2,3-pentanedione, 1-propanol, and 3-pentanone. Cold air circulation inhibited lipid oxidation to some extent, resulting in a blander flavor profile. More cis-4-heptenal, cis-2-heptenal, octanal and 2-ethylfuran accumulated during the UV-assisted cold-air drying process, enriching its greasy flavor and burnt flavor.

CONCLUSION

UV-assisted cold-air drying could promote moderate lipid oxidation, which is beneficial for improving product flavor. To sum up, UV radiation played a crucial role in the flavor formation during the drying process of Cololabis saira. © 2024 Society of Chemical Industry.

Electromagnetic wave-based technology for ready-to-eat foods preservation: a review of applications, challenges and prospects

In recent years, the ready-to-eat foods market has grown significantly due to its high nutritional value and convenience. However, these foods are also at risk of microbial contamination, which poses food safety hazards. Additionally, traditional high-temperature sterilization methods can cause food safety and nutritional health problems such as protein denaturation and lipid oxidation. Therefore, exploring and developing effective sterilization technologies is imperative to ensure food safety and nutritional properties, and protect consumers from potential foodborne diseases. This paper focuses on electromagnetic wave-based pasteurization technologies, including thermal processing technologies such as microwave, radio frequency, and infrared, as well as non-thermal processing technologies like ultraviolet, irradiation, pulsed light, and photodynamic inactivation. Furthermore, it also reviews the antibacterial mechanisms, advantages, disadvantages, and recent applications of these technologies in ready-to-eat foods, and summarizes their limitations and prospects. By comparing the limitations of traditional high-temperature sterilization methods, this paper highlights the significant advantages of these pasteurization techniques in effectively inhibiting microbial growth, slowing lipid oxidation, and preserving food nutrition and flavor. This review may contribute to the industrial application and process optimization of these pasteurization technologies, providing an optimal choice for preserving various types of ready-to-eat foods.

Recent Advances in Non-Contact Food Decontamination Technologies for Removing Mycotoxins and Fungal Contaminants

Agricultural food commodities are highly susceptible to contamination by fungi and mycotoxins, which cause great economic losses and threaten public health. New technologies such as gamma ray irradiation, ultraviolet radiation, electron beam irradiation, microwave irradiation, pulsed light, pulsed electric fields, plasma, ozone, etc. can solve the problem of fungal and mycotoxin contamination which cannot be effectively solved by traditional food processing methods. This paper summarizes recent advancements in emerging food decontamination technologies used to control various fungi and their associated toxin contamination in food. It discusses the problems and challenges faced by the various methods currently used to control mycotoxins, looks forward to the new trends in the development of mycotoxin degradation methods in the future food industry, and proposes new research directions.

Can Extraintestinal Pathogenic Escherichia coli with Heat Resistance Profile Overcome Nonthermal Technologies?

Ultraviolet-C light-emitting diode (UVC-LED) and ultrasound (US) are two nonthermal technologies with the potential to destroy pathogens. However, little is known about their effectiveness in strains with a history of heat resistance. Thus, this study aimed to evaluate the phenotype and genotype of heat-resistant extraintestinal pathogenic Escherichia coli (ExPEC) with heat resistance genes after the application of US, UVC-LED, and UVC-LED+US. For this, two central composite rotatable designs were used to optimize the UVC-LED and US conditions in four ExPEC isolated from beef. From the genome of these isolates obtained in a previous study, possible genes for UVC resistance were analyzed. Results showed that US was ineffective in reducing >0.30 log colony-forming unit/mL, and that when used after UVC-LED, it showed a nonsynergic or antagonistic effect. Also, UVC-LED had the greatest effect at the maximum dose (4950 mJ/cm2 from 1.65 mW/cm2 for 50 min). However, the strains showed some recovery after that, which could be implicated in the expression of genes included in SOS system genes, some others present in the transmissible Locus of Stress Tolerance (trxBC and degP), and others (terC). Thus, ExPEC can overcome the conditions used in this study for US, UVC-LED, and UVC-LED+US, probably due to the history of resistance to other cellular damage. The result of this study will contribute to future studies that aim to find better treatment conditions for each food product.

Effect of Optimized UV-LED Technology on Modeling, Inactivation Kinetics and Microbiological Safety in Tomato Juice

This research analyzed, optimized and modeled the inactivation kinetics of pathogenic bacteria (PB1: Escherichia coli O157:H7 and PB2: Listeria monocytogenes) and determined the microbiological safety of tomato juice processed by UV-LED irradiation and heat treatment. UV-LED processing conditions were optimized using response surface methodology (RSM) and were 90% power intensity, 21 min and 273-275 nm (251 mJ/cm2) with R2 > 0.96. Using the optimal conditions, levels of PB1 and PB2 resulted a log reduction of 2.89 and 2.74 CFU/mL, respectively. The Weibull model was efficient for estimating the log inactivation of PB1 and PB2 (CFU/mL). The kinetic parameter δ showed that 465.2 mJ/cm2 is needed to achieve a 90% log (CFU/mL) reduction in PB1 and 511.3 mJ/cm2 for PB2. With respect to the scale parameter p > 1, there is a descending concave curve. UV-LED-treated tomato juice had an 11.4% lower Listeria monocytogenes count than heat-treated juice on day 28 (4.0 ± 0.82 °C). Therefore, UV-LED technology could be used to inactivate Escherichia coli O157:H7 and Listeria monocytogenes, preserving tomato juice for microbiological safety, but studies are required to further improve the inactivation of these pathogens and analyze other fruit and vegetable juices.

Optimizing UVC-LED application to improve the shelf life of vacuum-packed refrigerated stored Nile tilapia (Oreochromis niloticus) fillets

Although ultraviolet-C light-emitting diode (UVC-LED) has proven antimicrobial effectiveness doses needed to reach it cause adverse effects on the physicochemical quality of fish, and thus, optimization studies are crucial to boost its industrial application. This study aimed to identify optimal UVC-LED conditions for maximum shelf life extension with the least possible quality changes of refrigerated stored tilapia fillets from a central composite rotatable design (CCRD). UVC-LED powers (1, 1.38, and 1.58 mW/cm2 ) and times (500, 1800, and 2700 s) were set on the CCRD, which generated 11 treatments, including three replicate experiments. Treatments were analyzed for total aerobic psychrotrophic count, lipid oxidation, instrumental color, and texture parameters on days 0, 2, 4, 7, 11, and 14. The UVC-LED affected shelf life and physicochemical parameters in a nonlinear fashion. UVC-LED-treated fish had increased shelf life by 2.80-4.76 days and increase or decrease in lipid oxidation (0.025-0.276 mg of malondialdehyde [MDA]/kg), total color change (∆E = 3.47-9.06), and hardness (1.31-8.51 N) over the refrigerated storage depending on specific UVC-LED conditions applied. The optimal UVC-LED condition was 0.97 mW/cm2 with 2503.6 s (2428.50 mJ/cm2 ), which increased the fillet's shelf life by 2.5-fold (2 days) while maintaining quality closer to the original throughout refrigerated storage, resulting in ∆E < 5, an increase of only 0.05 mg of MDA/kg, and preservation of the decrease in hardness by 3.38 N compared to its control counterparts. Therefore, it represents an eco-friendly technology that can easily scaled industrially to enhance the sustainable fish production chain. PRACTICAL APPLICATION: The high fish perishability is a global concern due to food safety risks and waste generation impacting the environment adversely, especially nowadays, where fish production and consumption have increased, and there are more evident efforts to sustainable production. UVC-LED is an eco-friendly technology with proven antimicrobial effectiveness but doses needed to reach this effect enhance oxidative degradation. Despite that, optimization studies concerning the maximum shelf life extension while retaining the physicochemical quality of refrigerated stored fish are a gap in the literature and a barrier to its industrial application. Our findings are helpful in sustainably enhancing the fish production chain.

Emerging technologies in seafood processing: An overview of innovations reshaping the aquatic food industry

Seafood processing has traditionally been challenging due to the rapid spoilage rates and quality degradation of these products. With the rise of food science and technology, novel methods are being developed to overcome these challenges and improve seafood quality, shelf life, and safety. These methods range from high-pressure processing (HPP) to edible coatings, and their exploration and application in seafood processing are of great importance. This review synthesizes the recent advancements in various emerging technologies used in the seafood industry and critically evaluates their efficacy, challenges, and potential benefits. The technologies covered include HPP, ultrasound, pulsed electric field, plasma technologies, pulsed light, low-voltage electrostatic field, ozone, vacuum cooking, purified condensed smoke, microwave heating, and edible coating. Each technology offers unique advantages and presents specific challenges; however, their successful application largely depends on the nature of the seafood product and the desired result. HPP and microwave heating show exceptional promise in terms of quality retention and shelf-life extension. Edible coatings present a multifunctional approach, offering preservation and the potential enhancement of nutritional value. The strength, weakness, opportunity, and threat (SWOT) analysis indicates that, despite the potential of these technologies, cost-effectiveness, scalability, regulatory considerations, and consumer acceptance remain crucial issues. As the seafood industry stands on the cusp of a technological revolution, understanding these nuances becomes imperative for sustainable growth. Future research should focus on technological refinements, understanding consumer perspectives, and developing regulatory frameworks to facilitate the adoption of these technologies in the seafood industry.

Advancements in nonthermal physical field technologies for prefabricated aquatic food: A comprehensive review

Aquatic foods are nutritious, enjoyable, and highly favored by consumers. In recent years, young consumers have shown a preference for prefabricated food due to its convenience, nutritional value, safety, and increasing market share. However, aquatic foods are prone to microbial spoilage due to their high moisture content, protein content, and unsaturated fatty acids. Furthermore, traditional processing methods of aquatic foods can lead to issues such as protein denaturation, lipid peroxidation, and other food safety and nutritional health problems. Therefore, there is a growing interest in exploring new technologies that can achieve a balance between antimicrobial efficiency and food quality. This review examines the mechanisms of cold plasma, high-pressure processing, photodynamic inactivation, pulsed electric field treatment, and ultraviolet irradiation. It also summarizes the research progress in nonthermal physical field technologies and their application combined with other technologies in prefabricated aquatic food. Additionally, the review discusses the current trends and developments in the field of prefabricated aquatic foods. The aim of this paper is to provide a theoretical basis for the development of new technologies and their implementation in the industrial production of prefabricated aquatic food.

Slightly acidic electrolyzed water-slurry ice: shelf-life extension and quality maintenance of mackerel (Pneumatophorus japonicus) during chilled storage

BACKGROUND

Different ice treatments were applied for the preservation of mackerel (Pneumatophorus japonicus). The quality changes of samples treated with flake ice (Control), slurry ice (SI) and slightly acidic electrolyzed water-slurry ice (SAEW-SI) in microbiological, physicochemical, protein characteristic, and sensory evaluation were investigated during chilled storage.

RESULTS

SAEW-SI showed a significant advantage for the inhibition of microbial growth, which could extend the shelf-life for another 144 h at least, compared with Control group. SAEW-SI treatment also showed a strong inhibition for the increase in pH, total volatile basic nitrogen (TVB-N), K-value, histamine and metmyoglobin (MetMb) content. Results of texture profile analysis (TPA) and water holding capacity (WHC) indicated that SAEW-SI can obviously suppress the decrease of hardness value, and have a better protective effect on muscle structure compared to flake ice and SI (P < 0.05). During the whole experiment, the highest sensory scores and a* were obtained in the SAEW-SI group, which indicated that SAEW-SI treatment could maintain better sensory characteristics. According to the results of thiobarbituric acid reactive substances (TBARS) and fluorescence spectroscopy analysis, SAEW-SI treatment could effectively retard protein degradation and lipid oxidation compared with Control and SI group. In maintaining the quality of mackerel, SAEW-SI shows a better effect than SI due to the synergistic effect of fence factors.

CONCLUSION

The results demonstrated that the shelf-life of mackerel could be extended and the quality of mackerel could be maintained effectively with SAEW-SI treatment during chilled storage. © 2022 Society of Chemical Industry.

Pernicious Attitude of Microbial Biofilms in Agri-Farm Industries: Acquisitions and Challenges of Existing Antibiofilm Approaches

Biofilm is a complex matrix made up of extracellular polysaccharides, DNA, and proteins that protect bacteria against physical, chemical, and biological stresses and allow them to survive in harsh environments. Safe and healthy foods are mandatory for saving lives. However, foods can be contaminated by pathogenic microorganisms at any stage from farm to fork. The contaminated foods allow pathogenic microorganisms to form biofilms and convert the foods into stigmatized poison for consumers. Biofilm formation by pathogenic microorganisms in agri-farm industries is still poorly understood and intricate to control. In biofilms, pathogenic bacteria are dwelling in a complex manner and share their genetic and physicochemical properties making them resistant to common antimicrobial agents. Therefore, finding the appropriate antibiofilm approaches is necessary to inhibit and eradicate the mature biofilms from foods and food processing surfaces. Advanced studies have already established several emerging antibiofilm approaches including plant- and microbe-derived biological agents, and they proved their efficacy against a broad-spectrum of foodborne pathogens. This review investigates the pathogenic biofilm-associated problems in agri-farm industries, potential remedies, and finding the solution to overcome the current challenges of antibiofilm approaches.

A Comprehensive Analysis of the UVC LEDs' Applications and Decontamination Capability

The application of light-emitting diodes (LEDs) has been gaining popularity over the last decades. LEDs have advantages compared to traditional light sources in terms of lifecycle, robustness, compactness, flexibility, and the absence of non-hazardous material. Combining these advantages with the possibility of emitting Ultraviolet C (UVC) makes LEDs serious candidates for light sources in decontamination systems. Nevertheless, it is unclear if they present better decontamination effectiveness than traditional mercury vapor lamps. Hence, this research uses a systematic literature review (SLR) to enlighten three aspects: (1) UVC LEDs' application according to the field, (2) UVC LEDs' application in terms of different biological indicators, and (3) the decontamination effectiveness of UVC LEDs in comparison to conventional lamps. UVC LEDs have spread across multiple areas, ranging from health applications to wastewater or food decontamination. The UVC LEDs' decontamination effectiveness is as good as mercury vapor lamps. In some cases, LEDs even provide better results than conventional mercury vapor lamps. However, the increase in the targets' complexity (e.g., multilayers or thicker individual layers) may reduce the UVC decontamination efficacy. Therefore, UVC LEDs still require considerable optimization. These findings are stimulating for developing industrial or final users' applications.

Induced changes of phenolic compounds in turmeric bread by UV-C radiation

Phenolic compounds of breads added with turmeric at different concentrations (A: 0, B: 1.25, C: 2.5, D: 5 and E:10%) and radiated by UV-C (I. 0, II. 15, III. 30 and IV. 60 s), have been evaluated by HPLC (High-performance liquid chromatography). It is shown that: (i) UV-C radiation modifies the content of phenolic compounds as a function of the percentage of addition of turmeric and the exposure time. There were significant differences (ρ ≤ 0.05) in the concentration of phenolic acids of the turmeric bread (TB): 0 s (sinapic, chlorogenic, protocatechuic), 15 s (chlorogenic, ferulic, protocatechuic, p-hydroxybenzoic, gallic), 30 s (chlorogenic and gallic) and 60 s (chlorogenic). (ii) In TB without radiation appeared, the sinapic, beta resorcylic, syringic and ferulic acids. In the radiation of bread at 15 s, the phenolic acids chlorogenic, ferulic, protocatechuic, p-hydroxybenzoic, gallic, had the highest concentration in the breads added with turmeric at 10% (0.02 μg mL⁻¹), 10% (0.38 μg mL⁻¹), 1.25, 2.5, 5% (0.39 μg mL⁻¹), 10% (1.06 μg mL ⁻¹) and 0% (1.10 μg mL⁻¹). (iii) There was a degradation of phenolic acids due to UV-C radiation at 30 and 60 s. At 15 s radiation, sinapic, beta resorcylic, syringic and ferulic acids were not detected in turmeric breads from breads added with turmeric at (1.25, 1.25, 0 and 0%). In radiation at 60 s, beta resorcylic, syringic and ferulic acids were not detected in any bread added with turmeric. In addition, measurements of proximate chemistry, color, sensory analysis, and number of fungal colonies were performed. It is important to mention that the sanitary quality is improved by both UV-C radiation and turmeric. However, the highest results in sanitary quality improvement were due to turmeric.

Investigating the Use of Ultraviolet Light Emitting Diodes (UV-LEDs) for the Inactivation of Bacteria in Powdered Food Ingredients

The addition of contaminated powdered spices and seasonings to finished products which do not undergo further processing represents a significant concern for food manufacturers. To reduce the incidence of bacterial contamination, seasoning ingredients should be subjected to a decontamination process. Ultraviolet light emitting diodes (UV-LEDs) have been suggested as an alternative to UV lamps for reducing the microbial load of foods, due to their increasing efficiency, robustness and decreasing cost. In this study, we investigated the efficacy of UV-LED devices for the inactivation of four bacteria (Listeria monocytogenes, Escherichia coli, Bacillus subtilis and Salmonella Typhimurium) on a plastic surface and in four powdered seasoning ingredients (onion powder, garlic powder, cheese and onion powder and chilli powder). Surface inactivation experiments with UV mercury lamps, UVC-LEDs and UVA-LEDs emitting at wavelengths of 254 nm, 270 nm and 365 nm, respectively, revealed that treatment with UVC-LEDs were comparable to, or better than those observed using the mercury lamp. Bacterial reductions in the seasoning powders with UVC-LEDs were less than in the surface inactivation experiments, but significant reductions of 0.75-3 log10 colony forming units (CFU) were obtained following longer (40 s) UVC-LED exposure times. Inactivation kinetics were generally nonlinear, and a comparison of the predictive models highlighted that microbial inactivation was dependent on the combination of powder and microorganism. This study is the first to report on the efficacy of UV-LEDs for the inactivation of several different bacterial species in a variety of powdered ingredients, highlighting the potential of the technology as an alternative to the traditional UV lamps used in the food industry.