Levels of trace metals on microplastic particles in beach sediments of the island of Vis, Adriatic Sea, Croatia

Decreased particle size enhances the aging behavior of microplastics during sewage sludge composting: Physicochemical properties and cadmium loading

Although aerobic composting is capable of aging microplastics (MPs), the influence of size on MPs aging during composting and loading of cadmium (Cd) remains unclear. Therefore, we investigated variations in the physicochemical properties of polyethylene terephthalate microplastics (PET-MPs) with different sizes (1.0 -5.0, 0.2 -1.0, and 0.05 -0.2 mm) during composting and the concentration of Cd accumulated on the surface of different-sized aged PET-MPs. The results indicated that PET-MPs exhibited size-dependent as they aged during composting, with smaller sizes aging faster. After composting, the 0.05 -0.2 mm PET-MPs had the greatest increase in specific surface area (205.5 %), compared with the 1.0 -5.0 mm (18.7 %) and 0.2 -1.0 mm (95.6 %) PET-MPs. The greatest increase in the carbonyl index/oxygen-to-carbon atom ratio was also observed for the 0.05 -0.2 mm PET-MPs, which were 2.25 / 3.27 and 0.02 / 2.11 times higher than those of the 1.0 -5.0 mm and 0.2-1.0 mm PET-MPs, respectively. Similarly, size-dependent accumulation of Cd on the aged PET-MPs was also observed: 0.05-0.2 mm (5.37 mg/kg Cd) > 0.2 -1.0 mm (2.90 mg/kg Cd) > 1.0-5.0 mm (0.78 mg/kg Cd). These findings demonstrate that the aging behavior of polymer is closely related to their size, emphasizing the role of size in the fate and pollutant loading of polymer.

Buoyant polyethylene rope fragments might be vehicles of migration for larval mussels (Mytilus coruscus)

The widespread use of plastics has led to ecosystem risks, which serve as ideal substrates for biofouling in aqueous environments, spreading ecological hazards. In this study, we established a simulation system incorporating Mytilus coruscus larvae and buoyant plastic rope fragments, using polyethylene rope fragments as substrates to assess the attachment behavior of the larvae and the duration of their buoyancy, in order to investigate the potential role of buoyant plastic rope fragments in facilitating larval dispersal and evaluate their ecological implications. The results demonstrated that larvae successfully attached to plastic rope fragments, showing a preference for the rougher ends, and extended their pelagic phase by up to 25 days. The average attachment count of larvae on plastic rope fragments coated with mixed microalgal biofilm (50.0 ± 23.6 ind/5 cm) was lower than on rope fragments without biofilm (70.6 ± 19.4 ind/5 cm), but the difference was not statistically significant (p > 0.05). Particle dispersal simulations indicated that the extended pelagic phase significantly increased the northward dispersal range of the larvae. Based on these findings, we suggest that the increased dispersal range may influence the genetic differentiation of M. coruscus populations. These findings enhance our understanding of the ecological impacts of plastics on M. coruscus and other sessile organisms.

Impact of seasonal variations on microplastic accumulation and characteristics in sandy beaches of Sichang Island, the inner Gulf of Thailand

Microplastics (MPs) are pervasive environmental pollutants whose fate, transport, and ecological impacts require clarification. This study examines the abundance and characteristics of MPs (16-5000 μm) in sandy beach sediments on Sichang Island, the inner Gulf of Thailand, during the dry season and after a four-month wet season. On the western beach, exposed to monsoon winds and currents, MP abundance increased from 2295.38 ± 1227.44 pieces/kg in the dry season to 2386.63 ± 121.45 pieces/kg post-wet season. Conversely, the leeward eastern beach showed a significant decrease, from 686.29 ± 243.90 to 238.63 ± 121.45 pieces/kg. Polypropylene was the dominant polymer, with reduced variation in MP color and shape following the wet season. The proportion of smaller MPs (16-100 μm) decreased from 59 to 62 % in the dry season to 27-42 % post-wet season, while larger debris became more prevalent. These findings highlight seasonal shifts in MP accumulation and dispersal on sandy beaches influenced by hydrodynamic conditions.

Baseline assessment of metal and microplastic pollution in sediments of a small-sized harbor in western Baltic Sea (Kalmar, Sweden)

This study provides a baseline analysis of sediment pollution in Kalmar Guest Harbor, Sweden, focusing on metals and microplastics. The study site, a bustling coastal area, was chosen to investigate the connections between anthropogenic activities, bioturbation, and environmental contaminants. The results revealed that the pollution extends beyond 30 cm of depth below the seafloor, with elevated levels of copper (Cu), tungsten (W), cadmium (Cd), zinc (Zn), lead (Pb), and microplastics. Significantly, there is no previous publication alarming the W contamination in the Baltic Sea sediment, and therefore, our findings highlight the need for further investigation into tungsten contamination in the region. Furthermore, we explored the distribution patterns, potential sources and relationships of different contaminants. The K-means cluster analysis revealed that bioturbation is speculated to influences the depth concentration of pollutants, particularly at shallow depths (0‬-18 cm). Metal contaminants do not appear to be predominantly bound to MP particles.

Plastics and their derivatives are impacting animal ecophysiology: A review

Nowadays, plastic pollution is one of the most significant issues affecting the environment, posing a serious threat to marine biodiversity, ecosystem stability, and human health. Millions of tons of plastic waste enter the oceans every year, and the impact of microplastics (MPs) is much more worrying than visible contamination. The presence of these particles puts a strain on ecological dynamics, causing a significant impact on the health of marine organisms and affects humans due to the interconnection existing with the environment and the food chain. This review article examines the different ways in which MPs interact with marine life, the mechanisms that drive this pollution, and the cascading consequences for the health of organisms and ecosystems. It also highlights the critical links between plastic pollution and human health and underlines the urgency of a global and coordinated approach to address this growing crisis. Only through deeper understanding, increased awareness and collective action can we hope to mitigate the significant impacts of plastic pollution and ensure a sustainable future for oceans and our planet.

Review of mayflies (Insecta Ephemeroptera) as a bioindicator of heavy metals and microplastics in freshwater

Heavy metal and microplastic pollutions are prevalent in freshwater ecosystems, with many freshwater bodies being contaminated by one or both of these pollutants. Recent studies reported extreme detections of Cd, Pb and Zn, high concentrations of Cr, Pb and Cu and microplastics acting as vectors of pollutants, including heavy metals. Mayflies can serve as bioindicators of heavy metal contamination in freshwater ecosystems because changes in their community structure, physiology, and behaviour can reflect and help predict the concentrations of metals in these environments. This review discusses the ecological alterations induced by tissue metal concentration in mayflies and other macroinvertebrates. As sensitive taxa to heavy metal contamination, mayflies can reflect the impacts of this pollution through their ethology and relationship to the substrate, highlighting issues such as eutrophication, alterations in community structure, inhibitory effects and sediment toxicity. Mayflies are also highly affected by microplastic exposure, which leads to ingestion, bioaccumulation, biomagnification, habitat and community alteration, behavioural changes, physiology alteration and toxicity. Mayflies bioindication metrics for assessing the impact of heavy metals and microplastics include the examination of community alteration, functional feeding behaviour, molecular structure, dietary and toxicity impacts, bioaccumulation and biomagnification and biomarkers. Current challenges for the utilization of mayflies as bioindicators include temporal variations in sensitivity, lack of universally recognised protocols and need for standardised protocols for microplastic analysis. Additionally, the applicability of mayflies as bioindicators may vary across different ecosystems, emphasising the need for selecting suitable indicators that align with the unique characteristics of the ecosystem.

Co-occurrence of microplastics and microparticles containing Cu and Zn and other heavy metals in sea-surface microlayer in Osaka Bay, Japan

Antifouling biocides such as Cu, Zn, and organic compounds not only inhibit adhesion of sessile organisms on ship hull but also possess toxicity to non-sessile organisms in marine environment. Thus, we firstly investigated the heavy metals and polymer types of anthropogenic microparticles (MPs) floating in the sea-surface microlayer (S-SML) in Osaka Bay. 7 types of MPs containing different metals (Cu, Cu-Zn, Zn, Ti, Sn, Ba and Fe-Mn-Ni) were found. The polymer type for 97.8 % of Cu and Cu-Zn MPs (41 samples) and 52.6 % of Zn MPs (19 samples) was acrylic resins which are widely used as binders in contemporary antifouling paints for ships; concentrations of 511-54,000 mg/kg for Cu and 95.1-13,200 mg/kg for Zn were found in these MPs. The high metal concentrations found the co-existence of acrylic polymers point towards an origin from antifouling paint particles (APPs). Furthermore, to quantify Cu and Zn concentrations in these MPs based on X-ray fluorescence spectroscopy (μ-XRF), calibration curves obtained from standard paint particles containing different Cu and Zn concentrations and different particle sizes made with similar matrix used in commercial antifouling paint were firstly established, according to which highly reliable Cu and Zn concentrations in MPs were obtained.

Sorption of trace metals by macro- and microplastics within intertidal sediments: Insights from a long-term field study within Burrard Inlet, British Columbia, Canada

Plastics are now the dominant fraction of anthropogenic marine debris and as a result of their long residence times, it is important to determine the threats that plastics present to marine ecosystems including their ability to sorb a diversity of environmental pollutants such as trace metals. To address this knowledge gap, this study examined the sorption of cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb), and zinc (Zn) by macro- and microplastics of polyethylene terephthalate (PETE) and high-density polyethylene (HDPE) within marine intertidal sediments in a human-impacted area of Burrard Inlet (British Columbia, Canada). Trace metal sorption by macro- and microplastics was dependent on 1) polymer characteristics, notably the aging of the plastic over the duration of the field experiment as shown by the formation of new peaks via FTIR spectra; and 2) amounts of sediment organic matter, where the sorption of trace metals by the plastic particles decreased with increasing organic matter content (from 2.8 % to 15.8 %). Plastic particles play a minor role in trace metals sorption in the presence of organic matter at high concentrations as a result of competitive adsorption. Overall, the interaction of trace metals with sediment plastics was highly dynamic and to understand the key processes controlling this dynamic requires further study. This work contributed to our understanding on metal-plastic interactions in coastal intertidal sediments from urban environments and serve to support plastic pollution risk management and bioremediation studies.

Micro-/nano-plastics as vectors of heavy metals and stress response of ciliates using transcriptomic and metabolomic analyses

The escalating presence of microplastics and heavy metals in marine environments significantly jeopardizes ecological stability and human health. Despite this, research on the combined effects of microplastics/nanoplastics (MPs/NPs) and heavy metals on marine organisms remains limited. This study evaluated the impact of two sizes of polystyrene beads (approximately 2 μm and 200 nm) combined with cadmium (Cd) on the ciliate species Euplotes vannus. Results demonstrated that co-exposure of MPs/NPs and Cd markedly elevated reactive oxygen species (ROS) levels in ciliates while impairing antioxidant enzyme activities, thus enhancing oxidative damage and significantly reducing carbon biomass in ciliates. Transcriptomic profiling indicated that co-exposure of MPs/NPs and Cd potentially caused severe DNA damage and protein oxidation, as evidenced by numerous differentially expressed genes (DEGs) associated with mismatch repair, DNA replication, and proteasome function. Integrated transcriptomic and metabolomic analysis revealed that DEGs and differentially accumulated metabolites (DAMs) were significantly enriched in the TCA cycle, glycolysis, tryptophan metabolism, and glutathione metabolism. This suggests that co-exposure of MPs/NPs and Cd may reduce ciliate abundance and carbon biomass by inhibiting energy metabolism and antioxidant pathways. Additionally, compared to MPs, the co-exposure of NPs and Cd exhibited more severe negative effects due to the larger specific surface area of NPs, which can carry more Cd. These findings provide novel insights into the toxic effects of MPs/NPs and heavy metals on protozoan ciliates, offering foundational data for assessing the ecological risks of heavy metals exacerbated by MPs/NPs.

The competition of heavy metals between hyporheic sediments and microplastics of driving factors in the Beiluo River Basin

Both sediments and microplastics (MPs) are medias of heavy metals (HMs) in river ecosystems. This study investigated HMs (Mn, Cr, V, As, Cu, Co, Cd, Pb, and Ni) concentration and driving factors for competitive enrichment between hyporheic sediments versus MPs. The medias basic characteristics indicated that the sediments were mostly sand and rich in Fe2O3; three polymer types were identified, with blue, fragment, less than 500 µm being the main types of MPs. The results have shown that the average content of extracted HMs in MPs was much higher than that of the same metals accumulated in sediments. HMs in sediments and MPs reached heavily polluted at some points, among which As and Cd were ecological risks. Electrostatic adsorption and surface complexation, and biofilm-mediated and organic matter complexation were the interaction mechanism of HMs with sediments and MPs. Further, the driving factors affecting the distribution of HMs in the two carriers were analyzed by multivariate statistical analysis. The results demonstrated that carrier characteristics, hydrochemical factors, and the inherent metal load of MPs were the main causes of the high HMs content. These findings improved our understanding of HMs fate and environmental risks across multiple medias.

Toxicity effects and mechanism of micro/nanoplastics and loaded conventional pollutants on zooplankton: An overview

Micro/nanoplastics in aquatic environments is a noteworthy environmental problem. Zooplankton, an important biological group in aquatic ecosystems, readily absorb micro/nanoplastics and produce a range of toxic endpoints due to their small size. This review summarises relevant studies on the effects of micro/nanoplastics on zooplankton, including combined effects with conventional pollutants. Frequently reported adverse effects include acute/chronic lethal effects, oxidative stress, gene expression, energetic homeostasis, and growth and reproduction. Obstruction by plastic entanglement and blockage is the physical mechanism. Genotoxicity and cytotoxicity are molecular mechanisms. Properties of micro/nanoplastics, octanol/water partition coefficients of conventional pollutants, species and intestinal environments are important factors influencing single and combined toxicity. Selecting a wider range of micro/nanoplastics, focusing on the aging process and conducting field studies, adopting diversified zooplankton models, and further advancing the study of mechanisms are the outstanding prospects for deeper understanding of impacts of micro/nanoplastics on aquatic ecosystem.

Fragmented marine plastics as the prevalent litter type on a small island beach in the Adriatic

The issue of plastic pollution has dramatically intensified in the recent years. Our study investigates extensive plastic contamination of a sandy beach on a small Adriatic island. The beach was sampled on three occasions, in 2013, 2020 and 2022, using 1 m2 quadrats placed along the lower and upper strandlines, resulting in average litter concentrations of 385 ± 106, 1095 ± 522 and 129 ± 37 item m-2, respectively. The lower size limit of collected litter was 1 mm, thus including large microplastics. Plastic fragments (49-74 %) and plastic pellets (15 %-37 %) were predominant litter categories. The proportion of fragments is significantly higher during the tourist season with a more intensive cleaning regime (April-October), as opposed to the off-season (November-March). Fisheries and aquaculture litter was identified as a relevant source of pollution. More research is needed in the future into the microplastics smaller than 1 mm.

Adsorption properties and mechanism of Cu(II) on virgin and aged microplastics in the aquatic environment

Microplastics (MPs) migrate by adsorbing heavy metals in aquatic environments and act as their carriers. However, the aging mechanisms of MPs in the environment and the interactions between MPs and heavy metals in aquatic environments require further study. In this study, two kinds of materials, polyamide (PA) and polylactic acid (PLA) were used as target MPs, and the effects of UV irradiation on the physical and chemical properties of the MPs and the adsorption behavior of Cu(II) were investigated. The results showed that after UV irradiation, pits, folds and pores appeared on the surface of aged MPs, the specific surface area (SSA) increased, the content of oxygen-containing functional groups increased, and the crystallinity decreased. These changes enhanced the adsorption capacity of aged MPs for Cu(II) pollutants. The adsorption behavior of the PA and PLA MPs for Cu(II) conformed to the pseudo-second-order model and Langmuir isotherm model, indicating that the monolayer chemical adsorption was dominant. The maximum amounts of aged PA and PLA reached 1.415 and 1.398 mg/g, respectively, which were 1.59 and 1.76 times of virgin MPs, respectively. The effects of pH and salinity on the adsorption of Cu(II) by the MPs were significant. Moreover, factors such as pH, salinity and dosage had significant effects on the adsorption of Cu(II) by MPs. Oxidative complexation between the oxygen-containing groups of the MPs and Cu(II) is an important adsorption mechanism. These findings reveal that the UV irradiation aging of MPs can enhance the adsorption of Cu(II) and increase their role as pollutant carriers, which is crucial for assessing the ecological risk of MPs and heavy metals coexisting in aquatic environments.

Adsorption of copper by naturally and artificially aged polystyrene microplastics and subsequent release in simulated gastrointestinal fluid

Microplastics, especially aged microplastics can become vectors of metals from environment to organisms with potential negative effects on food chain. However, a few studies focused on the bioavailability of adsorbed metals and most studies related to aged microplastics used artificial method that cannot entirely reflect actual aging processes. In this study, virgin polystyrene was aged by ozone (PS-O3), solar simulator (PS-SS) and lake (PS-lake) to investigate adsorption of Cu by virgin, artificially and naturally aged microplastics and subsequent release in simulated gastrointestinal fluids (SGF). Characterization results show carbonyl was formed in PS-O3 and PS-SS, and the oxidation degree was PS-O3 > PS-SS > PS-lake. However, Cu adsorption capacity followed this order PS-lake (158 μg g-1) > PS-SS (117 μg g-1) > PS-O3 (65 μg g-1) > PS-virgin (0). PS-O3 showed highest Cu adsorption capacity at 0.5 h (71 μg g-1), but it dropped dramatically later (10 μg g-1, 120 h), because PS-O3 could break up and the adsorbed Cu released in solutions subsequently. For PS-lake, precipitation of metallic oxides contributes to the accumulation of Cu. The addition of dissolved organic matter (DOM) could occupy adsorption sites on PS and compete with Cu, but also can attach PS and adsorb Cu due to its rich functional groups. The simultaneous ingestion of microplastics with food suggested that adsorbed Cu is solubilized mostly from aged PS to SGF.

Exploring the microplastic pollution: Unveiling origins and varieties in coastal sediments and waters of the Bushehr Province, Persian Gulf, Iran

In this study, microplastic (MP) pollution in the coastal sediments and tidal waters of Bushehr province in the Persian Gulf was comprehensively investigated. The sampling stations were selected based on their proximity to various human activities in January and February 2022, such as tourism, fishing, urban development and industry. The results showed that the abundance of MP associated with different human activities varied. The highest concentrations were observed near the petrochemical industry in Asaluyeh, followed by the densely populated Bushehr and the fishing port of Dayyer. Other areas such as Ganaveh, Deylam and Mand also showed varying levels of MP contamination. The average MP concentration was 1.67 × 104 particles/km2 in surface water and 1346.67 ± 601.69 particles/kg in dry sediment. Fiber particles were in the majority in both sediment and water samples, mainly black. The sediment samples had a size range of 100-500 μm (41.34 %), while the water samples were between 500 and 1000 μm (33.44 %). The main polymers found were polyethylene (PE) and polypropylene (PP). This assessment highlights the widespread problem of microplastic pollution in the coastal and intertidal zones of Bushehr province in the Persian Gulf.

Potential ecological risk assessment of microplastics in coastal sediments: Their metal accumulation and interaction with sedimentary metal concentration

Metal pollution in sediments has long been recognized, while sediments are also a long-term sink for microplastics (MPs). MPs may also adsorb environmental pollutants, including metals, as well as leaching polymer components and chemicals used during production. A comprehensive survey of 21 locations around Qatari coastline investigated abundance of MPs in high-shore intertidal sediments and concentration of metals both on MPs and sediment particles. MPs abundance ranged from 3 to 156 MPs particles·kg-1 (12-624 MPs particles·m-2) with polyethylene being the most abundant (27.4 %). MPs showed physical morphologies, with 76 % displayed signs of chemical degradation as confirmed by the carbonyl absorption peak profile, possibly due to exposure to harsh environmental conditions on the Arabian Gulf shores. Most metals analyzed were found at higher concentrations in sediments than the same metals adsorbed to MPs. The average metal concentration ranged from 0.26 (Cd) to 3122.62 μg∙g-1 (Sr) in sediments while 0.22 (Mo) to 30.26 μg∙g-1 (Sr) in MPs. The calculated metal Pollution Load Index (Sed PLI, range 0.57-2.38) for sediments indicates unpolluted to moderately polluted levels, while the Potential Ecological Risk Index (Sed PERI, range 6.9-2220) indicates a relatively considerable ecological risk for metal pollution in sediments in some of the coastal areas surveyed. PLI values calculated for metals associated with MPs (MPs PLI, range 1.1-7.5), suggests relatively moderate pollution, while the PERI for metals in MPs (MPs PERI, range 25.2-1811) has similar ecological risk in terms of metal pollutants in MPs as for sediments. This may be effective in providing relative spatial indices of pollution load and risk for metals associated with MPs, which could potentially inform establishment of an appropriate assessment framework, where MPs are increasingly abundant in coastal sediments. However, this does not account for the relatively lower abundance of MPs compared to sediments.

The effect of polystyrene nanoplastics on arsenic-induced apoptosis in HepG2 cells

Microplastics are detrimental to the environment. However, the combined effects of microplastics and arsenic (As) remain unclear. In this study, we investigated the combined effects of polystyrene (PS) microplastics and As on HepG2 cells. The results showed that PS microplastics 20, 50, 200, and 500 nm in size were taken up by HepG2 cells, causing a decrease in cellular mitochondrial membrane potential. The results of lactate dehydrogenase release and flow cytometry showed that PS microplastics, especially those of 50 nm, enhanced As-induced apoptosis. In addition, transcriptome analysis revealed that TP53, AKT1, CASP3, ACTB, BCL2L1, CASP8, XIAP, MCL1, NFKBIA, and CASP7 were the top 10 hub genes for PS that enhanced the role of As in HepG2 cell apoptosis. Our results suggest that nano-PS enhances As-induced apoptosis. Furthermore, this study is important for a better understanding of the role of microplastics in As-induced hepatotoxicity.

Impacts of extracellular polymeric substances on the behaviors of micro/nanoplastics in the water environment

Increasing pollution of microplastics (MPs) and nanoplastics (NPs) has caused widespread concern worldwide. Extracellular polymeric substances (EPS) are natural organic polymers mainly produced by microorganisms, the major components of which are polysaccharides and proteins. This review focuses on the interactions that occur between EPS and MPs/NPs in the water environment and evaluates the effects of these interactions on the behaviors of MPs/NPs. EPS-driven formation of eco-corona, biofilm, and "marine snow" can incorporate MPs and NPs into sinking aggregates, resulting in the export of MPs/NPs from the upper water column. EPS coating greatly enhances the adsorption of metals and organic pollutants by MPs due to the larger specific surface area and the abundance of functional groups such as carboxyl, hydroxyl and amide groups. EPS can weaken the physical properties of MPs. Through the synergistic action of different extracellular enzymes, MPs may be decomposed into oligomers and monomers that can enter microbial cells for further mineralization. This review contributes to a comprehensive understanding of the dynamics of MPs and NPs in the water environment and the associated ecological risks.

Metal(oid)s in plastic debris, with distinct features, from Spanish Mediterranean beaches with different anthropogenic pressure: Are these particles potential monitors for metal pollution?

Metal(oid)s concentrations have been quantified in plastic pieces collected from four beaches located in the Mediterranean coast of Spain with different characteristics (i.e. anthropogenic pressure, zone). Metal(oid)s content was also related to selected plastic criteria (i.e. color, degradation status, polymer). The selected elements were quantified with mean concentrations in the sampled plastics with the following order: Fe > Mg > Zn > Mn > Pb > Sr > As > Cu > Cr > Ni > Cd > Co. Moreover, black, brown, PUR, PS, and coastal line plastics concentrated the higher metal(oid)s levels. Local of sampling (influence of mining exploitation) and severe degradation were key factors for uptake of metal(oid)s from water by plastics as modification of surfaces strengths their adsorption capacity. Determined high levels of Fe, Pb and Zn in plastics reflected the pollution degree of the marine areas. Therefore, this study is a contribution for the potential use of plastics as pollution monitors.

Plastic-associated metal(loid)s in the urban river environments of Mongolia

The widespread distribution of plastic debris in riverine environment is one of the major concerns of environmental pollution because of its potential impact on the aquatic ecosystem. In this study, we investigated the accumulation of metal(loid)s on polystyrene foam (PSF) plastics collected from the floodplain of the Tuul River of Mongolia. The metal(loid)s sorbed on plastics were extracted from the collected PSF via sonication after peroxide oxidation. The size-dependent association of metal(loid)s with plastics indicates that PSFs act as vectors for pollutants in the urban river environment. The mean concentrations of metal(loid)s (i.e., B, Cr, Cu, Na, and Pb) indicate a higher accumulation of the metal(loid)s on meso-sized PSFs compared with macro- and micro-sized PSFs. In addition, the images from scanning electron microscopy (SEM) indicated not only the degraded surface of plastics showing fractures, holes, and pits but also the adhered mineral particles and microorganisms on the PSFs. The interaction of metal(loid)s with plastics was probably facilitated by the physical and chemical properties of altered surface of plastics through photodegradation, followed by an increase in surface area by size reduction and/or biofilm development in the aquatic environment. The enrichment ratio (ER) of metals on PSF samples suggested the continuous accumulation of heavy metals on plastics. Our results demonstrate that the widespread plastic debris could be a carrier of hazardous chemicals in the environment. Considering that the negative impacts of plastic debris on environmental health are major concerns to be addressed, the fate and behavior of the plastics especially their interaction with pollutants in aquatic environments should be further studied.

Mapping of heavy metal contamination associated to microplastics marine debris - A case study: Dubai, UAE

Microplastics (MPs) are ubiquitously detected in the environment. The adverse impact of microplastics on marine life is well documented. Previous research has shown that MPs can adsorb heavy metals, however, this fact has not been investigated along the coast of Dubai, UAE. Elemental composition of MPs debris was determined using X-ray fluorescence spectroscopic (XRF) analysis. The analyzed MPs were extracted from 80 sediment samples collected from the wrack lines of 16 Dubai, UAE beaches. A total of 480 MPs pieces extracted from the samples were analyzed in order to detect heavy metals. The polymer composition was previously confirmed by FTIR spectroscopy, showing that polyethylene (PE) and polypropylene (PP) were the most abundant MPs. 14 heavy metals were identified in the samples: Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Pb, Ce, Pr, Nd, Pd, and Co with different concentrations. Five of them (Cr, Ni, Cu, Zn, and Pb) are priority pollutants according to EPA. Their average concentrations in oxide form were Cr₂O₃ (2.96 %), NiO (0.32 %), CuO (0.45 %), ZnO (0.56 %), and PbO (1.49 %).

Association of metals with expanded polystyrene in the marine environment

Expanded polystyrene (EPS) has characteristics distinctively different to many thermoplastics that strongly influence its behaviour in the marine environment. However, the extent and nature of its interactions with metals are poorly understood. In the present study, fragments of beached EPS have been retrieved from an urban harbour and an open sandy beach in southwest England and the concentrations, locations and availabilities of various metals (and metalloids) of geochemical importance and anthropogenic significance determined. Total (aqua regia-digestible) metal concentrations at the surface (normalised to a depth of 0.5 cm) were considerably greater than surface concentrations reported for polyolefins retrieved from the same region and, with the exception of Cd, Sb and Zn, were significantly greater than those in unweathered EPS packaging material. Median surface concentrations of Al, As, Co, Fe, Mn, Ni and Sb were significantly greater at the open beach than the harbour, but concentrations of Cu and Pb were significantly greater at the latter. Where measured, concentrations of all metals were similar at the surface and subsurface (0.5 to 1 cm), and availability to 0.7 M HCl ranged from <20 % for Al and Fe to >60 % for Mn and Pb. These results, coupled with visible characteristics, suggest that aqueous and particulate metals are able to interact with the EPS surface via a number of mechanisms (adsorption, precipitation, entrapment) and migrate through the weathered, porous structure to within the polymer matrix. Enrichment factors normalised to Al as a granulometric proxy and relative to a regional baseline indicate "moderately severe" contamination with respect to Cd, Cu, Pb, Sb and Zn in at least one of the environments studied, suggesting that EPS might be a significant carrier and means of exposure for these metals in the marine environment.

Single and combined effects of microplastics and cadmium on the sea cucumber Apostichopus japonicus

Microplastic pollution of the ocean has received extensive attention as plastic pollution increases globally, but the potential ecological risks caused by microplastic interactions with trace metals still require further research. In this study, Apostichopus japonicus was used to explore the individual and combined toxicities of cadmium (Cd) and microplastics and their effects on growth, Cd tissue accumulation, digestive enzymes, and gut microbes. The body weight gain and specific growth rate of animals exposed to a combination of high concentrations of Cd and microplastics decreased. The addition of high concentrations of cadmium to the diet led to an increase in cadmium content in the respiratory tree, digestive tract and body wall. Amylase, lipase and trypsin decreased to different degrees in the group treated with high concentrations of Cd/microplastics. Firmicutes were significantly reduced across multiple treatment groups, with the order Lactobacillales being the most significantly affected. Cd is the pollutant causing the greatest negative impact, but the presence of microplastics undoubtedly increases its toxicity.

Adsorption behavior of UV aged microplastics on the heavy metals Pb(II) and Cu(II) in aqueous solutions

As the "vector" of heavy metals in the aquatic environment, microplastics (MPs) have a great influence on the migration and transformation of heavy metals. In this study, the adsorption of polypropylene (PP), polyethylene (PE) and polystyrene (PS) on two models of heavy metals after UV aging and environmental variables (ionic coexistence, pH, salinity, and fulvic acid) were comprehensively explored on adsorption. The results show that new oxidation functional groups are formed and their hydrophilicity is enhanced after MPs aging. As a result, the adsorption experiments showed that the adsorption of contaminants by UV aged MPs exceeds that of pristine MPs. The adsorption amounts of Pb(II) and Cu(II) by PP, PE and PS increased by 1.45, 1.46, 1.25 and 1.63, 1.39, 1.22 times, respectively. Adsorption kinetic data were more consistent with the pseudo-second-order kinetic model, proving chemisorption to be the mechanism governing the interaction between metal ions and MPs. The Freundlich model could accurately predict the heavy metal adsorption isotherms on MPs, showing that non-homogeneous multilayer adsorption dominates the process. In Pb(II)-Cu(II) binary composite system, metal ion adsorption capacity on MPs is less than that of the single system adsorption capacity, which proves that there is a specific inhibitory effect between coexisting ions. Additionally, external factors like pH, salinity, and fulvic acid content have a big impact on adsorption behavior. According to mechanism analysis, the adsorption process mainly relies on electrostatic interaction, surface complexation, and van der Waals force.

Beached microplastics at the Bahia Blanca Estuary (Argentina): Plastic pellets as potential vectors of environmental pollution by POPs

Microplastics (MPs) from the coastal areas of a highly anthropised estuary were sampled to assess their distribution in coastal sediments and their role as potential vectors of pollution. The average MP density was 1693 ± 2315 MPs/kg, which mainly accumulated in the high tide and storm berm areas of the beach. The Microplastic Pollution Index (MPPI), Microplastic Impact Coefficient (CMPI), Hierarchical Cluster Analysis and Principal Component Analysis revealed spatial variation in MPs pollution. High-density polyethylene plastic pellets were abundant at two beaches (192 ± 218 MPs/kg sediment). Furthermore, the presence of sorbed chemicals on pellets was assessed through GC-MS, showing 0.95 ± 0.09 ng/g of ∑7OCPs, 4.03 ± 0.89 ng/g of ∑7PCBs, 108.76 ± 12.88 ng/g of ∑16 PAHs and 122.79 ± 11.13 g/g of ∑29 PAHs. The sorption capacity of plastics, combined with their abundance, poses an environmental concern and also highlights their suitability as indicators of chemical exposure.

Microplastics in Commercial Fishes and By-Catch from Selected FAO Major Fishing Areas of the Southern Baltic Sea

According to recent world wide studies, microplastics (MPs) have been found in many fish species; however, the majority of research has focused only on the gastrointestinal tract, neglecting edible organs. This study aimed to assess the presence of microplastics in the non-edible (gills, digestive tract) and edible organs (liver) of three commercial fish species and twoby-catch species from the southern Baltic Sea. Fish (Clupea harengus, Gadus morhua, Platichthy sflesus, Taurulus baublis, Cyclopterus lumpus) were caught in 108 and 103 FAO Fishing Zones belonging to the Polish fishing zone. The abundanceof MPs ranged from 1 to 12 items per fish, with an average of 4.09 items. MPs were observed in different organs, such as the liver, gills, and digestive tract of all five tested species. MPs recognized as fibers were the most abundant. Other shapes of polymers found in fish organs were pellets and particles of larger plastic pieces. The dominant color of the MPs was blue, but there were also red, black, transparent, yellow, green, and white items found. According to dimensions, dominant MPs were between 0.1 and 0.5 mm in size. The chemical characterization of polymers accomplished by the use of Fourier Transform Infrared (FT-IR) Spectroscopy demonstrated the abundance of cellophane, polyamide, polyethylene, polypropylene, polyethylene terephthalate, polyvinyl propionate, polyacrylonitrile, and polyester.

A review on the effect of micro- and nano-plastics pollution on the emergence of antimicrobial resistance

The recent upsurge in the studies on micro/nano plastics and antimicrobial resistance genes has proven their deleterious effects on the environmental and human health. Till-date, there is a scarcity of studies on the interactions of these two factors and their combined influence. The interaction of microplastics has led to the formation of new plastics namely plastiglomerates, pyroplastics. and anthropoquinas. It has long been ignored that the occurrence of microplastics has become a breeding ground for the emergence of antimicrobial resistance genes. Evidently microplastics are also associated with the occurrence of other pollutants such as polyaromatic hydrocarbons and pesticides. The increased use of antibiotics (after Covid breakout) has further elevated the detrimental effects on human health. Therefore, this study highlights the relation of microplastics with antibiotic resistance generation. The factors such as uncontrolled use of antibiotics and negligent plastic consumption has been evaluated. Furthermore, the future research prospective was provided that can be helpful in correctly identifying the seriousness of the environmental occurrence of these pollutants.

Occurrence and contents of trace metals and rare earth elements on plastic pellets

We determined the occurrence of pellets (2-5 mm) and their composition in terms of trace metals and rare earth elements (REE) on nine sandy beaches of the coast of Bahia, northeastern Brazil. We compared the occurrence of pellets between oceanic and sheltered beaches and the effect of fluvial contribution on the occurrence of these microplastics. The number of pellets found was surprisingly low (i.e., max 45 pellets per m² in an oceanic beach without fluvial river inputs). Thus, the studied beaches exhibited a very low pollution index. Concentrations of ∑REE in pellets varied between 0.36 and 1.74 mg kg^-1 and were ~5-fold higher in white/transparent pellets than in brown pellets. The sum of trace metals (i.e., Fe, Cd, Cu, Ni, Pb, and Zn) was also highest in the white pellets (357 ± 12 mg kg^-1). Plastic pellets are a potentially important vector of REE exposition to biota.

Occurrence and distribution of microplastics in peatland areas: A case study in Long An province of the Mekong Delta, Vietnam

Vietnam is known as one of the high plastic consumption countries in Southeast Asia. This study initially determined characteristics of microplastics (MPs) including morphology, polymer type, and abundance at peatland areas in Mekong Delta in Vietnam. The MPs level was found with an average abundance of 192.3 ± 261.3 items kg^-1. In details, those values at Thanh Hoa, Duc Hue, and Tan Thanh were observed at 57.0 ± 110.4 items kg^-1, 7.0 ± 10.6 items kg^-1, and 513.0 ± 186.9 items kg^-1, respectively. The results indicated that MP particle contaminations in peatland sediments are significant among sampling sites (p < 0.001). Also, FT-IR analysis indicated that polyvinyl chloride is the primary polymer (46.2 %), followed by polyethylene (20.9 %), and polypropylene (9.2 %) in peatland samples and their composition varies in different regions significantly. The fragments (67.0 %) and films (24.6 %) were the most common shapes, followed by fibers (7.6 %) and foams (0.9 %). Small MPs with particle size (300-1000 μm) was the most abundant in sediment samples. Moreover, the most popular colors observed in peatland sediments were aqua (26.6 %), white (25.6 %), blue (25.4 %), and green (12.7 %). Our findings indicated that anthropogenic factors and environmental processes that caused the transformation/transportation and accumulation, leading to rising MP contaminant concerns in peatland areas in Mekong Delta in Vietnam, mainly in terms of the spatial distribution of MPs. In summary, this study provided an in-depth knowledge of microplastic pollution in peatland areas, which is crucial for the building sustainable development strategies in these areas.

Correlation of metals and degraded marine (micro)plastic litter in geologically similar coastal areas with different anthropogenic characteristics

The association and statistical correlation of anthropogenically important trace metals (TM) Cd, Cu, Pb, Zn and degraded marine microplastic (MP) extracted from the bulk debris samples at two locations from two marine systems, estuarine and coastal, in the Croatian Adriatic coastal area were assessed. The abundance of MP particles at both sites were primarily defined by local wave climate, with the open coastal site containing 9-fold more microplastic particles (>4 mm) as compared to the semi-closed estuarine, or twice as much considering bulk plastics. Generally, the higher abundance of adsorbed metal on MP were observed in the more anthropogenically influenced estuary than in the open coastal site and followed the order: polystyrene > polypropylene > low density polyethylene. The amounts of adsorbed zinc were the highest on all types of plastics at both sites, while the affinity of polystyrene for metals followed: Zn > Pb ≈ Cu > Cd.

A review of microplastics in soil: Occurrence, analytical methods, combined contamination and risks

Microplastics (MPs) pollution is becoming a serious environmental issue of global concern. Currently, the effects of MPs on aquatic ecosystems have been studied in detail and in depth from species to communities. However, soils, the largest reservoir of MPs, have been less studied, and little is known about the occurrence, environmental fate and ecological impacts of MPs. Therefore, based on the existing knowledge, this paper firstly focused specifically on the main sources of soil MPs pollution and explored the main reasons for their strong heterogeneity in spatial distribution. Secondly, as a primary prerequisite for evaluating MPs contamination, we systematically summarized the analytical methods for soil MPs and critically compared the advantages and disadvantages of the different methods in the various operational steps. Furthermore, this review highlighted the combined contamination of MPs with complex chemical contaminants, the sorption mechanisms and the associated factors in the soil. Finally, the risks posed by MPs to soil, plants, the food chain and even humans were outlined, and future directions for soil MPs research were proposed, while the urgent need for a unified approach to MPs extraction and identification was emphasized. This study provides a theoretical reference for a comprehensive understanding of the separation of soil MPs and their ecological risk as carriers of pollution.

Molecular interactions of polyvinyl chloride microplastics and beta-blockers (Diltiazem and Bisoprolol) and their effects on marine meiofauna: Combined in vivo and modeling study

The ecotoxicological effects of beta-blockers (i.e. Diltiazem and Bisoprolol) and their interactions with the microplastic polyvinyl chloride on marine meiofauna were tested in laboratory microcosms. An experimental factorial design was applied, using meiobenthic fauna collected from the Old Harbor of Bizerte (NE Tunisia), but with a main focus on the nematode communities. The meiobenthic invertebrates were exposed to two concentrations of Diltiazem and Bisoprolol, of 1.8 µg.L^-1 and 1.8 mg.L^-1, respectively, and one concentration of polyvinyl chloride (i.e. 20 mg.kg^-1), separately and mixed. The overall meiofauna abundance was significantly reduced in all treatments, mainly that of polychaetes and amphipods. Moreover, the juveniles-gravid female ratios of the nematode communities were the lowest in the 1.8 µg.L^-1 Bisoprolol treatment and for the 1.8 mg.L^-1 mixture of Diltiazem and microplastics, suggesting that different dosages influence the maturity status of the examined species. The demographic results were also supported by in silico approach. The simulation of molecular interactions revealed acceptable binding affinities (up to -8.1 kcal/mol) and interactions with key residues in the germ line development protein 3 and sex-determining protein from Coenorhabditis elegans. Overall, the experimental outcome strongly indicates synergistic interactions among the beta-blockers Diltiazem and Bisoprolol and the microplastic polyvinyl chloride on marine nematode communities.

Occurrence and distribution of micro(meso)plastic-sorbed heavy metals and metalloids in sediments, Gulf of Guinea coast (SE Atlantic)

The pervasive existence of microplastics (MPs) and toxic metals is raising environmental and health concerns. Plastics are essentially a complex mixture of chemicals, but exposure to the aquatic environment increases their complexity through contaminant desorption/sorption. The aim of this study was to establish baseline data on the elemental occurrence and distribution of potentially toxic and geochemical metals/metalloids in microplastics 1-5 mm and mesoplastics (> 5 mm - 1 cm) along designated coastlines of the Gulf of Guinea (Nigeria) in addition to enabling more comprehensive ecotoxicological risk assessment. The concentrations of twenty-six metals: aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), boron (B), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), magnesium (Mg), manganese (Mn), molybdenum (Mo), nickel (Ni), potassium (K), selenium (Se), sodium (Na), silicon (Si), silver (Ag), strontium (Sr), thallium (Tl), titanium (Ti), vanadium (V), and zinc (Zn), associated with beach MPs, pristine, and lagoon plastics were determined after extraction in 10% nitric acid and analysis using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The distribution of MPs was variable, with 3680 particles identified along the drift and high waterlines across designated shoreline locations. The beach MPs were dominated by polyethylene (PE), polypropylene (PP), and polystyrene (PS), whereas lagoon-sourced plastics were characterized by polyethylene terephthalate (PET), polystyrene (PS), and polyurethane (PUR). Metal concentration was higher when associated with foam plastic (PS, PUR, PEVA) compared to hard plastic (PE, PP, PET) samples. The results showed that all samples had slightly elevated Al, Fe, Mn, and Zn concentrations, suggesting potential sorption interactions and plastic additive influences. Notably, foam MPs had a stronger affinity for metals. This study emphasizes the critical role of microplastics in serving as vectors for toxic metals. Except for Cd, pollution indices such as the potential contamination index (PCI), hazard quotient (HQ), and modified hazard quotient (mHQ) indicated low severity contamination of beach and lagoon MPs by heavy metals. However, considering long-term accumulation of sorbed metals, their potential toxicity to marine biota may be considerable.

Microplastics aggravate the bioaccumulation and toxicity of coexisting contaminants in aquatic organisms: A synergistic health hazard

There are ongoing controversies regarding the effects of microplastics (MPs) on the bioaccumulation and toxicity of coexisting contaminants in aquatic organisms. This study aims to quantitatively evaluate this issue based on 870 endpoints from 40 publications. It was shown that the presence of MPs significantly increased the bioaccumulation of co-contaminants by 31%, with high statistical power and without obvious publication bias. The aggravated bioaccumulation was also revealed by the strongly positive correlation between bioconcentration factors in the presence and the absence of MPs. Furthermore, the subgroup/regression analyses indicated that the vector effect of MPs on other chemicals was affected by multiple factors and their interactions, such as particle size and exposure time. In addition, a relatively comprehensive biomarker profile was recompiled from included studies to assess the changes in toxicity caused by combined exposure. Results confirmed that the presence of MPs obviously exacerbated the toxicity of co-contaminants by 18%, manifested by the potentiated cytotoxicity, endocrine disruption, immunotoxicity and oxidative stress, implying a synergistic health hazard. Ultimately, the mismatches between laboratory and field conditions were discussed, and the recommendations for future research were offered.

The impact of nano/micro-plastics toxicity on seafood quality and human health: facts and gaps

Contamination of the food and especially marine environment with nano/micro-plastic particles has raised serious concern in recent years. Environmental pollution and the resulting seafood contamination with microplastic (MP) pose a potential threat to consumers. The absorption rate of the MP by fish is generally considered low, although the bioavailability depends on the physical and chemical properties of the consumed MP. The available safety studies are inconclusive, although there is an indication that prolonged exposure to high levels of orally administered MP can be hazardous for consumers. This review details novel findings about the occurrence of MP, along with its physical and chemical properties, in the marine environment and seafood. The effect of processing on the content of MP in the final product is also reviewed. Additionally, recent findings regarding the impact of exposure of MP on human health are discussed. Finally, gaps in current knowledge are underlined, and the possibilities for future research are indicated in the review. There is an urgent need for further research on the absorption and bioavailability of consumed MP and in vivo studies on chronic exposure. Policymakers should also consider the implementation of novel legislation related to MP presence in food.

Microplastics as a vehicle of heavy metals in aquatic environments: A review of adsorption factors, mechanisms, and biological effects

Microplastics (MPs) have recently attracted much attention due to their widespread distribution in the aquatic environment. Microplastics can act as a vector of heavy metals in the aquatic environment, causing a potential threat to aquatic organisms and human health. This review mainly summarized the occurrence of microplastics in the aquatic environment and their interaction with heavy metals. Then, we considered the adsorption mechanisms of MPs and heavy metals, and further critically discussed the effects of microplastics properties and environmental factors (e.g., pH, DOM, and salinity) on the adsorption of heavy metals. Finally, the potential risks of combined exposure of MPs and heavy metals to aquatic biota were briefly evaluated. This work aims to provide a theoretical summary of the interaction between MPs and heavy metals, and is expected to serve as a reference for the accurate assessment of their potential risks in future studies.

Are research methods shaping our understanding of microplastic pollution? A literature review on the seawater and sediment bodies of the Mediterranean Sea

The lack of standardization on the definition and methods in microplastic (MP) research has limited the overall interpretation and intercomparison of published data. This has presented different solutions to assess the presence of these pollutants in the natural environment, bringing the science forward. Microplastics have been reported worldwide across different biological levels and environmental compartments. In the Mediterranean Sea, numerous research efforts have been dedicated to defining the MP pollution levels. The reported MP concentrations are comparable to those found in the convergence zone of ocean gyres, pointing to this basin as one of the world's greatest plastic accumulation areas. However, to what extent are the data produced limited by the methods? Here, we present the results of a systematic review of MP research methods and occurrence targeting the seawater and sediment bodies of the Mediterranean Sea. Based on this dataset, we 1) assess the discrepancies and similarities in the methods, 2) analyze how these differences affect the reported concentrations, and 3) identify the limitations of the data produced for the Mediterranean Sea. Moreover, we reaffirm the pressing need of developing a common reporting terminology, and call for international collaboration between Mediterranean countries, especially with North African countries, to provide a complete picture of the MP pollution status in this basin.

Characterization and source analysis of heavy metals contamination in microplastics by Laser-Induced Breakdown Spectroscopy

The increasing presence of microplastics in marine environment is a critical issue and the plastic-metal contamination has received much attention. However, conventional methods for heavy metal determination are time-consuming, need sample pretreatments, require a strict operation environment, or have high limits of detection. In this study, heavy metals contaminated microplastics samples collected from a remote coral island were quantified and analyzed by using Laser-Induced Breakdown Spectroscopy (LIBS). The characters of the trace metals in microplastics were used to determine the sources of the contaminants, and the potential origins of the metals were demonstrated from the statistical analysis. LIBS is a facile and non-destructive trace analysis technique and the strategy led to rapid and multi-metals detection of individual samples. Heavy metals such as copper (Cu), lead (Pb), iron (Fe), cadmium (Cd), zinc (Zn), manganese (Mn), chromium (Cr) were detected and quantified in the individual microplastics samples. The findings showed that LIBS is a promising strategy for the characterization of microplastics and for the analysis of the source of heavy metals contaminants present in the microplastics particles.

Organochlorine pesticides, polycyclic aromatic hydrocarbons, metals and metalloids in microplastics found in regurgitated pellets of black vulture from Campeche, Mexico

Plastics are produced by the millions of tons worldwide each year, with their final deposition in landfills (LFs). Plastics deposited in LFs can fragment over time, giving rise to mesoplastics and later to microplastics (MPs), in which toxic chemicals such as heavy metals, organochlorine pesticides, and polycyclic aromatic hydrocarbons can adhere. MPs can be vectors for the exposure to pollutants of black vultures (Coragyps atratus) due to feeding in LFs, resulting in accidental ingestion of MPs. It is also possible that MPs can adsorb pollutants from vultures during the digestion process. The aim of this study was to estimate the risk of black vulture exposure to MPs, heavy metals (HMs), organochlorine pesticides (OCPs) and polycyclic aromatic hydrocarbons (PAHs). Fifty-eight black vulture pellets were collected at the Campeche LF during 2019 (n = 24) and 2020 (n = 34). The pellets, on average, had an MP load per pellet of 6.7 ± 5.8 MPs/total pellets. The greatest abundance of MPs was detected in 2019, with 225 particles in total. The concentrations of Cd, Pb, Cu, Cr, Hg, As, and Al were detected in the MPs, with the greatest average concentration of 35.59 ± 32.39 μg·g^-1 (2019) and 15.82 ± 17.47 μg·g^-1 (2020) for Al. In 2020, ∑endosulfans were present in all MPs at 0.97 ± 1.47 ng·g^-1. Among the PAHs, 15 of the 16 compounds indicated as priorities by the US EPA were quantified. The compound with the greatest total concentration for both years was acenaphthylene (3 rings), with 10.51 ± 7.88 ng·g^-1 (2019) and 10.61 ± 18 ng·g^-1 (2020). More research is needed regarding the origin of the contaminants detected in the MPs extracted from the pellets, since the contaminants may come from the environment or possibly from the digestion processes in the stomach of avian raptors and scavengers.

Interactions and effects of microplastics with heavy metals in aquatic and terrestrial environments

Contamination of waters and soils with microplastics (MPs) is an emerging environmental issue worldwide. MPs constitute a cocktail of various additives and polymers besides adsorbing toxic heavy metals from the environment. This co-occurrence of MPs with heavy metals poses a threat to the health of organisms and is poorly understood. Ingestion of MPs contaminated with heavy metals may also result in subsequent transfer of heavy metals up in the food chain. MPs surfaces play a crucial role in the adsorption of heavy metals. Aged/biofouled MPs facilitate greater adsorption of metals and certain microplastic (MP) polymers adsorb some metals more specifically. External factors involved in the process of adsorption/accumulation of heavy metals are the solution pH, salinity, and the concentration of relevant heavy metals in the media. Desorption greatly depends upon pH of the external solution. This is more concerning as the guts/digestive systems of organisms have low pH which could enhance the desorption of toxic metals and making them accumulate in their bodies. The aim of this article is to discuss the abundance, distribution, adsorption, and desorption behavior of MPs for heavy metals, and their combined toxic effects on flora and fauna based on the limited research on this topic in the literature. There is an overarching need to understand the interactions of MPs with heavy metals in different ecosystems so that the extent of ecotoxic effects they pose could be assessed which would help in the environmental regulation of these pollutants.

Unfolding the interaction between microplastics and (trace) elements in water: A critical review

Plastic and microplastic pollution is an environmental and societal concern. The interaction of plastic with organic chemicals in the environment has attracted scientific interest. New evidences have highlighted an unexpectedly high affinity of environmental plastics also for metal ions. The degree and typology of plastic ageing (including from mechanical, UV and biological degradations) appear as a pivotal factor determining such an interaction. These earlier evidences recently opened a new research avenue in the plastic pollution area. This review is the first to organize and critically discuss knowledge developed so far. Results from field and laboratory studies of metal accumulation on plastic are presented and the environmental factors most likely to control such an interaction are discussed. On the light of this knowledge, a generalist conceptual model useful for building hypotheses on the mechanisms at stake and directing future studies was elaborated and presented here. Furthermore, all available data on the thermodynamics of the plastic-metal interaction obtained from laboratory experiments are inventoried and discussed here, highlighting methodological and technical challenges that can potentially affect cross-comparability of data and their relevance for environmental settings. Finally, insights and recommendations on experimental approaches and analytical techniques that can help overtaking current limitations and knowledge gaps are proposed.

A comprehensive and fast microplastics identification based on near-infrared hyperspectral imaging (HSI-NIR) and chemometrics

Microplastic pollution is a global concern theme, and there is still the need for less laborious and faster analytical methods aiming at microplastics detection. This article describes a high throughput screening method based on near-infrared hyperspectral imaging (HSI-NIR) to identify microplastics in beach sand automatically with minimum sample preparation. The method operates directly in the entire sample or on its retained fraction (150 μm-5 mm) after sieving. Small colorless microplastics (<600 μm) that would probably be imperceptible as a microplastic by visual inspection, or missed during manual pick up, can be easily detected. No spectroscopic subsampling was performed due to the high-speed analysis of line-scan instrumentation, allowing multiple microplastics to be assessed simultaneously (video available). This characteristic is an advantage over conventional infrared (IR) spectrometers. A 75 cm² scan area was probed in less than 1 min at a pixel size of 156 × 156 μm. An in-house comprehensive spectral dataset, including weathered microplastics, was used to build multivariate supervised soft independent modelling of class analogy (SIMCA) classification models. The chemometric models were validated for hundreds of microplastics (primary and secondary) collected in the environment. The effect of particle size, color and weathering are discussed. Models' sensitivity and specificity for polyethylene (PE), polypropylene (PP), polyamide-6 (PA), polyethylene terephthalate (PET) and polystyrene (PS) were over 99% at the defined statistical threshold. The method was applied to a sand sample, identifying 803 particles without prior visual sorting, showing automatic identification was robust and reliable even for weathered microplastics analyzed together with other matrix constituents. The HSI-NIR-SIMCA described is also applicable for microplastics extracted from other matrices after sample preparation. The HSI-NIR principals were compared to other common techniques used to microplastic chemical characterization. The results show the potential to use HSI-NIR combined with classification models as a comprehensive microplastic-type characterization screening.

Ecotoxicological effects of microplastics on aquatic organisms: a review

Microplastics   ( <5 mm), which are classified based on primary or secondary sources, are widely distributed in the environment and exert significant effects on aquatic life forms; however, evidence regarding the ecotoxicological effects of microplastics on aquatic organisms is still limited. This research aims at filling a knowledge gap regarding generation sources, distribution, physicochemical properties, and biological behavior of microplastics (MP) in aquatic environments and their interaction with aquatic organisms. The literature indicates that concentrations of MPs observed in such environments are higher than the threshold for safe concentration (6650 buoyant particles/m³). MPs having large specific surface area, low polarity, and hydrophobic properties have been shown to absorb dichlorodiphenyltrichloroethane (DDT), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbon (PAHs), bisphenol A (BPA), polyfluoroalkyl substances (PFAS), antibiotics, and heavy metals. MPs adsorb large amounts of toxic organic chemicals (18,700 ng/g PCBs; 24,000 ng/g PAHs) and heavy metals (0.21-430 μg/g Cr; 0.0029-930 μg/g Cd; 0.35-2.89 μg/g As; 0.26-698,000 μg/g Pb). MPs originating from polystyrene (PS), polypropylene (PP), and polyvinylchloride (PVC) show greater toxicity toward aquatic organisms, with effects on the immune system, reproductive system, nervous system, and endocrine system. Thus, elucidating the cumulative toxic expression of MPs in different polluted environments is critical.

Overview of microplastics pollution with heavy metals: Analytical methods, occurrence, transfer risks and call for standardization

The identification and quantification of metals in microplastics are necessary to determine their exposure levels as well as to understand their potential toxicity in the environment linked to the ubiquity of microplastics. The readiness of effective protocols and measurement techniques for accurate metal quantification is of utmost importance. This first review, based on 28 original articles, provides a systematic assessment of the current protocols for extraction, detection and quantification of metals in microplastics and the challenges associated with them. Quality assurance and quality control measures are also summarized. Great variations of microplastic samples in terms of characteristics, number, mass and unit were noted. Wet acid and microwave acid digestion methods were commonly employed for metal extraction from microplastics using a combination of acids such as HF, HCl, HNO₃ and H₂SO₄ at different concentrations and reaction conditions. Adaptation of one or multiple characterization techniques including, inductively coupled plasma-optical emission spectroscopy, inductively coupled plasma mass-spectrometry, X-ray fluorescence and atomic absorption spectroscopy has been considered. The discrepancies in methodology and elements analyzed between studies produce variable results and troublesome comparison. Having considered the need for a standard procedure, this review highlighted several suggestions towards standardization and recommended perspectives for future research.

Microplastics in Surface Sediments along the Montenegrin Coast, Adriatic Sea: Types, Occurrence, and Distribution

Considering that microplastics are widespread in the marine environment, in this study we evaluated the presence, identify distribution, abundance, shape type, and color of microplastics in surface sediment along the Montenegrin coast, on the Adriatic Sea. These preliminary results provide the first published record of microplastics found in the surface sediment of this area and highlight the importance of microplastics as a component of marine debris. We documented the presence of microplastics at all sampling locations. The identification of polymer types was performed using Fourier-transform infrared (FTIR) spectroscopy, whereby the presence of three polymer types became evident: polypropylene (54.5%), polyethylene (9.7%), and acrylate copolymer (2.0%). Another 22.2% of particles were unidentified polymers, and the remaining 11.5% were non-synthetic materials. The most common shape type of microplastics was filaments (55.5%), followed by granules (26.3%), fragments (14.9%), and films (3.3%). The dominant colors of microplastics followed the order: blue > yellow > red > clear > black > green > blue-white > white. The average abundance of microplastics in all sampling locations was 609 pieces of microplastic/kg of dry sediment. Compared with other studies, the surface sediment of the Montenegrin coast is moderately to highly polluted with microplastics, depending on the examined location.

Surface adsorption of metallic species onto microplastics with long-term exposure to the natural marine environment

Microplastics are ubiquitous in most biomes and environments, representing one of the most pressing global environmental challenges. This study investigated the ability of pre-production microplastic pellets to accumulate metals from the marine environment. An accidental ocean discharge of poly(propylene) pellets occurred via a wastewater treatment centre at the coastal city of Warrnambool, Victoria - Australia. These pellets were collected routinely from Shelly Beach, adjacent to the ocean discharge site over a period of 16-months following the spill. This collection formed a unique time-series that accurately represented the degree to which metal ions in the coastal marine environment accumulate on plastic debris. Elemental analysis indicated an increase in concentration over time of rare earth elements and a selection of other metals supporting the hypothesis that microplastics selectively adsorb metals from the environment. A subset of the poly(propylene) pellets contained a surfactant coating which significantly increased the adsorption capacity. The surface properties in relation to adsorption were further explored with surface imaging and these results are also discussed. This study shows how microplastics act as nucleation points and carriers of trace metal ions in marine environments.

Occurrence, effect, and fate of residual microplastics in anaerobic digestion of waste activated sludge: A state-of-the-art review

The plastic products have large consumption over last decades, resulting in a serious microplastics (MPs) pollution. Specially, the main removal way of MPs from wastewater is to transfer MPs from liquid to solid phase, leading to its enrichment in waste activated sludge (WAS). Anaerobic digestion has been served as the most potential technique to achieve both resource recovery and sludge reduction, herein this review provides current information on occurrence, effect, and fate of MPs in anaerobic digestion of WAS. The effects of MPs on WAS anaerobic digestion are greatly related to forms, particles sizes, contents, compositions and leachates of MPs. Also, the presence of MPs not only can change the effects of other pollutants on anaerobic digestion of WAS, but also can affect the fates of them. Besides, the future perspectives focused on the fate, effect and final removal of MPs during WAS anaerobic digestion process are outlined.

Current Progress on Marine Microplastics Pollution Research: A Review on Pollution Occurrence, Detection, and Environmental Effects

Recently, microplastics pollution has attracted much attention in the environmental field, as researchers have found traces of microplastics in both marine and terrestrial ecological environments. Here, we reviewed and discussed the current progress on microplastics pollution in the marine environment from three main aspects including their identification and qualification methods, source and distribution, and fate and toxicity in a marine ecosystem. Microplastics in the marine environment originate from a variety of sources and distribute broadly all around the world, but their quantitative information is still lacking. Up to now, there have been no adequate and standard methods to identify and quantify the various types of microplastics, which need to be developed and unified. The fate of microplastics in the environment is particularly important as they may be transferred or accumulated in the biological chain. Meanwhile, microplastics may have a high adsorption capacity to pollutants, which is the basic research to further study their fate and joint toxicity in the environment. Therefore, all the findings are expected to fill the knowledge gaps in microplastics pollution and promote the development of relative regulations.

The Dual Role of Microplastics in Marine Environment: Sink and Vectors of Pollutants

This review is a follow-up to a previous review published in Journal of Marine Science and Engineeringon the issues of accumulation, transport, and the effects of microplastics (MPs) in the oceans. The review brings together experimental laboratory, mathematical, and field data on the dual role of MPs as accumulators of hydrophobic persistent organic compounds (POPs), and their release-effect in the marine ecosystem. It also examines the carrier role, besides POPs, of new emerging categories of pollutants, such as pharmaceuticals and personal care products (PPCPs). This role becomes increasingly important and significant as polymers age and surfaces become hydrophilic, increasing toxicity and effects of the new polymer-pollutant associations on marine food webs. It was not the intention to provide too many detailed examples of carriers and co-contaminants, exposed marine species, and effects. Instead, the views of two different schools of thought are reported and summarized: one that emphasizes the risks of transport, exposure, and risk beyond critical thresholds, and another that downplays this view.

Metals in microplastics: determining which are additive, adsorbed, and bioavailable

Microplastics from the North Atlantic Gyre deposited on Guadeloupe beaches were sampled and characterized. A new method is developed to identify which elements were present as additives in these microplastics. The method used both acidic leaching and acidic digestion. Several elements (Al, Zn, Ba, Cu, Pb, Cd, Mn, Cr) were identified as pigments. Furthermore, some elements used as additives to plastics (especially the non-essential elements) seem to contribute to most of the acidic leaching, suggesting that these additives can leach and adsorb onto the surface microplastics, becoming bioavailable. Based on the acidic leaching element content, only Cd should represent a danger for fish when ingested. However, further studies are needed to determine the potential synergetic effect on health caused by the ingestion of several elements and microplastics.