The role of cell-surface interactions in bacterial initial adhesion and consequent biofilm formation on nanofiltration/reverse osmosis membranes

Multiple pathways of vanadate reduction and denitrification mediated by denitrifying bacterium Acidovorax sp. strain BoFeN1

Contamination of aquifers by a combination of vanadate [V(V)] and nitrate (NO3-) is widespread nowadays. Although bioremediation of V(V)- and nitrate-contaminated environments is possible, only a limited number of functional species have been identified to date. The present study demonstrates the effectiveness of V(V) reduction and denitrification by a denitrifying bacterium Acidovorax sp. strain BoFeN1. The V(V) removal efficiency was 76.5 ± 5.41 % during 120 h incubation, with complete removal of NO3- within 48 h. Inhibitor experiments confirmed the involvement of electron transport substances and denitrifying enzymes in the bioreduction of V(V) and NO3-. Cyt c and riboflavin were important for extracellular V(V) reduction, with quinone and EPS more significant for NO3- removal. Intracellular reductive compounds including glutathione and NADH directly reduce V(V) and NO3-. Reverse transcription quantitative PCR confirmed the important roles of nirK and napA genes in regulating V(V) reduction and denitrification. Bioaugmentation by strain BoFeN1 increased V(V) and NO3- removal efficiency by 55.3 % ± 2.78 % and 42.1 % ± 1.04 % for samples from a contaminated aquifer. This study proposes new microbial resources for the bioremediation of V(V) and NO3-contaminated aquifers, and contributes to our understanding of coupled vanadium, nitrogen, and carbon biogeochemical processes.

Plant-derived bioactive compounds for the inhibition of biofilm formation: a comprehensive review

Biofilm formation is a widespread phenomenon that impacts different fields, including the food industry, agriculture, health care and the environment. Accordingly, there is a serious need for new methods of managing the problem of biofilm formation. Natural products have historically been a rich source of varied compounds with a wide variety of biological functions, including antibiofilm agents. In this review, we critically highlight and discuss the recent progress in understanding the antibiofilm effects of several bioactive compounds isolated from different plants, and in elucidating the underlying mechanisms of action and the factors influencing their adhesion. The literature shows that bioactive compounds have promising antibiofilm potential against both Gram-negative and Gram-positive bacterial and fungal strains, via several mechanisms of action, such as suppressing the formation of the polymer matrix, limiting O2 consumption, inhibiting microbial DNA replication, decreasing hydrophobicity of cell surfaces and blocking the quorum sensing network. This antibiofilm activity is influenced by several environmental factors, such as nutritional cues, pH values, O2 availability and temperature. This review demonstrates that several bioactive compounds could mitigate the problem of biofilm production. However, toxicological assessment and pharmacokinetic investigations of these molecules are strongly required to validate their safety.

Liposomal drug delivery strategies to eradicate bacterial biofilms: Challenges, recent advances, and future perspectives

Typical antibiotic treatments are often ineffectual against biofilm-related infections since bacteria residing within biofilms have developed various mechanisms to resist antibiotics. To overcome these limitations, antimicrobial-loaded liposomal nanoparticles are a promising anti-biofilm strategy as they have demonstrated improved antibiotic delivery and eradication of bacteria residing in biofilms. Antibiotic-loaded liposomal nanoparticles revealed remarkably higher antibacterial and anti-biofilm activities than free drugs in experimental settings. Moreover, liposomal nanoparticles can be used efficaciously for the combinational delivery of antibiotics and other antimicrobial compounds/peptide which facilitate, for instance, significant breakdown of the biofilm matrix, increased bacterial elimination from biofilms and depletion of metabolic activity of various pathogens. Drug-loaded liposomes have mitigated recurrent infections and are considered a promising tool to address challenges associated to antibiotic resistance. Furthermore, it has been demonstrated that surface charge and polyethylene glycol modification of liposomes have a notable impact on their antibacterial biofilm activity. Future investigations should tackle the persistent hurdles associated with development of safe and effective liposomes for clinical application and investigate novel antibacterial treatments, including CRISPR-Cas gene editing, natural compounds, phages, and nano-mediated approaches. Herein, we emphasize the significance of liposomes in inhibition and eradication of various bacterial biofilms, their challenges, recent advances, and future perspectives.

Transition from active motion to anomalous diffusion for Bacillus subtilis confined in hydrogel matrices

We investigate the motility of B. subtilis under different degrees of confinement induced by transparent porous hydrogels. The dynamical behavior of the bacteria at short times is linked to characteristic parameters describing the hydrogel porosity. Mean squared displacements (MSDs) reveal that the run-and-tumble dynamics of unconfined B. subtilis progressively turns into sub-diffusive motion with increasing confinement. Correspondingly, the median instantaneous velocity of bacteria decreases and becomes more narrowly distributed, while the reorientation rate increases and reaches a plateau value. Analyzing single-trajectories, we show that the average dynamical behavior is the result of complex displacements, in which active, diffusive and sub-diffusive segments coexist. For small and moderate confinements, the number of active segments reduces, while the diffusive and sub-diffusive segments increase. The alternation of sub-diffusion, diffusion and active motion along the same trajectory can be described as a hopping ad trapping motion, in which hopping events correspond to displacements with an instantaneous velocity exceeding the corresponding mean value along a trajectory. Different from previous observations, escape from local trapping occurs for B. subtilis through active runs but also diffusion. Interestingly, the contribution of diffusion is maximum at intermediate confinements. At sufficiently long times transport coefficients estimated from the experimental MSDs under different degrees of confinement can be reproduced using a recently proposed hopping and trapping model. Finally, we propose a quantitative relationship linking the median velocity of confined and unconfined bacteria through the characteristic confinement length of the hydrogel matrix. Our work provides new insights for the bacterial motility in complex media that mimic natural environments and are relevant to important problems like sterilization, water purification, biofilm formation, membrane permeation and bacteria separation.

Superior antibacterial surfaces using hydrophilic, poly(MPC) and poly(mOEGMA) free chains of amphiphilic block copolymer for sustainable use

Surface modification of electrically neutral hydrophilic polymers is one of the most promising methods for preventing biofouling and biological contamination by proteins and bacteria. Surface modification of inorganic materials such as silica-based glass can render them more durable and thus help in achieving the sustainable development goals. This study reports a novel method for the simple and effective surface modification of glass surfaces with amphiphilic block copolymers possessing the silane coupling segment composed of 3-(methacryloyloxy)propyltris (trimethylsilyloxy) silane and 3-methacryloxypropyltrimethoxysilane. The ability of hydrophilic segments composed of either 2-methacryloyloxyethyl phosphorylcholine (MPC) or poly(ethylene glycol) methyl ether methacrylate (mOEGMA) to prevent bacterial adhesion was investigated. The target block copolymers were prepared by reversible addition-fragmentation chain transfer polymerization and the monomer units of the hydrophilic segments were controlled to be either 120 or 160. The polymers were modified on the substrate by dip-coating. Contact angle measurements indicated that the block copolymer with the PMPC hydrophilic segment formed a hydrophilic surface without pre-hydration, while those with the PmOEGMA hydrophilic segment-coated surface became hydrophilic upon immersion in water. The block copolymer-coated surfaces decreased S. aureus adhesion, and a significant reduction was observed with the MPC-type block copolymer. The following surface design guidelines were thus concluded: (1) the block copolymer is superior to the random copolymer and (2) increasing the hydrophilic segment length further decreases bacterial adhesion.

Comprehensive understanding of the aging and biodegradation of polystyrene-based plastics

The extensive utilization and inadequate handling of plastics have resulted in severe environmental ramifications. In particular, plastics composed solely of a carbon-carbon (C-C) backbone exhibit limited degradation due to the absence of hydrolyzable functional groups. Plastics with enduring longevity in the natural environment are susceptible to environmental factors and their intrinsic properties, subsequently undergoing a series of aging processes that culminate in biodegradation. This article focuses on polystyrene (PS), which constitutes 20% of total plastic waste, as a case study. Initially, the application of PS in life and the impacts it poses are introduced. Following that, the key factors influencing the aging of PS are discussed, primarily encompassing its properties (e.g., surface characteristics, additives) and environmental factors (e.g., water matrices, biofilms). Lastly, an overview of microbial degradation of PS is provided, including potential microorganisms involved in PS degradation (bacteria, fungi, algae, and insects), four processes of microbial degradation (colonization, bio-fragmentation, assimilation, and mineralization), and potential mechanisms of microbial degradation. This study provides a comprehensive understanding of the multifaceted influences affecting the aging and biodegradation mechanisms of PS, thereby contributing valuable insights for the future management of plastic pollution.

Molecular characterization and in-depth genomic analysis to unravel the pathogenic features of an environmental isolate Enterobacter sp. S-33

Enterobacter species represent widely distributed opportunistic pathogens, commonly associated with plants and humans. In the present study, we performed a detailed molecular characterization as well as genomic study of a type VI secretion system (T6SS) bacterium belonging to member of the family Enterobacteriaceae and named Enterobacter sp. S-33. The comparative sequence analysis of the 16S rRNA gene showed that the strain was closely related to other Enterobacter species. The complete genome of the strain with a genome size of 4.6 Mbp and GC-content of 55.63% was obtained through high-quality sequencing. The genomic analysis with online tools unravelled the various genes belonging to the bacterial secretion system, antibiotic resistance, virulence, efflux pumps, etc. The isolate showed the motility behavior that contributes to Enterobacter persistence in a stressed environment and further supports infections. PCR amplification and further sequencing confirmed the presence of drug-efflux genes acrA, acrB, and outer membrane genes, viz. OmpA, OmpC, and OmpF. The cell surface hydrophobicity and co-aggregation assay against different bacterial strains illustrated its putative pathogenic nature. Genome mining identified various biosynthetic gene clusters (BGCs) corresponding to non-ribosomal proteins (NRPS), siderophore, and arylpolyene production. Briefly, genome sequencing and detailed characterization of environmental Enterobacter isolate will assist in understanding the epidemiology of Enterobacter species, and the further prevention and treatment of infectious diseases caused by these broad-host range species.

Post-translational modification by the Pgf glycosylation machinery modulates Streptococcus mutans OMZ175 physiology and virulence

Streptococcus mutans is commonly associated with dental caries and the ability to form biofilms is essential for its pathogenicity. We recently identified the Pgf glycosylation machinery of S. mutans, responsible for the post-translational modification of the surface-associated adhesins Cnm and WapA. Since the four-gene pgf operon (pgfS-pgfM1-pgfE-pgfM2) is part of the S. mutans core genome, we hypothesized that the scope of the Pgf system goes beyond Cnm and WapA glycosylation. In silico analyses and tunicamycin sensitivity assays suggested a functional overlap between the Pgf machinery and the rhamnose-glucose polysaccharide synthesis pathway. Phenotypic characterization of pgf mutants (ΔpgfS, ΔpgfE, ΔpgfM1, ΔpgfM2, and Δpgf) revealed that the Pgf system is important for biofilm formation, surface charge, membrane stability, and survival in human saliva. Moreover, deletion of the entire pgf operon (Δpgf strain) resulted in significantly impaired colonization in a rat oral colonization model. Using Cnm as a model, we showed that Cnm is heavily modified with N-acetyl hexosamines but it becomes heavily phosphorylated with the inactivation of the PgfS glycosyltransferase, suggesting a crosstalk between these two post-translational modification mechanisms. Our results revealed that the Pgf machinery contributes to multiple aspects of S. mutans pathobiology that may go beyond Cnm and WapA glycosylation.

Promising application of probiotic microorganisms as Pickering emulsions stabilizers

The purpose of this work was to study the ability of nineteen food-grade microorganisms as Pickering emulsion (PE) stabilizers. Medium-chain triacylglycerol (MCT) oil-in-water (50:50) PEs were fabricated by 10 wt% or 15 wt% of thermally-inactivated yeast, cocci, Bacillus spp. and lactobacilli cells. The characteristics of microorganisms related to "Pickering stabilization" including morphology, surface charge, interfacial tension, and "contact angle" were firstly studied. After that, the cells-stabilized PEs were characterized from both kinetic and thermodynamic viewpoints, microstructure and rheological properties. The interfacial tension and "contact angle" values of various microorganisms ranged from 16.33 to 38.31 mN/m, and from 15° to 106°, respectively. The mean droplet size of PEs ranged from 11.51 to 57.69 µm. Generally, the physical stability of cell-stabilized PEs followed this order: lactobacilli > Bacillus spp. > cocci > yeast. These variations were attributed to the morphology and cell wall composition. Increasing the microorganism concentration significantly increased the physical stability of PEs from a maximum of 12 days at 10 wt% to 35 days at 15 wt% as a result of better interface coverage. Shear-thinning and dominant elastic behaviors were observed in PEs. Physical stability was affected by the free energy of detachment. Therefore, food-grade microorganisms are suggested for stabilizing PEs.

The Heterogeneous Diffusion of Polystyrene Nanoparticles and the Effect on the Expression of Quorum-Sensing Genes and EPS Production as a Function of Particle Charge and Biofilm Age

Biofilms are abundantly present in both natural and engineered environmental systems and will likely influence broader particle fate and transport phenomena. While some developed models describe the interactions between nanoparticles and biofilms, studies are only beginning to uncover the complexity of nanoparticle diffusion patterns. With the knowledge of the nanoparticle potential to influence bacterial processes, more systematic studies are needed to uncover the dynamics of bacteria-nanoparticle interactions. This study explored specific microbial responses to nanoparticles and the heterogeneity of nanoparticle diffusion. Pseudomonas aeruginosa biofilms (cultivated for 48 and 96 hours, representing early and late stages of development) were exposed to charged (aminated and carboxylated) polystyrene nanoparticles. With a combination of advanced fluorescence microscopy and real time quantitative PCR, we characterized the diffusion of polystyrene nanoparticles in P. aeruginosa biofilms and evaluated how biofilms respond to the presence of nanoparticles in terms of the expression of key EPS production-associated genes (pelA and rpsL) and quorum-sensing associated (lasR) genes. Our findings show that nanoparticle diffusion coefficients are independent of the particle surface charge only in mature biofilms and that the presence of nanoparticles influences bacterial gene expression. Independent of the particle's charge polystyrene nanoparticles down-regulated pelA in mature biofilms. By contrast, charge-specific responses were identified in lasR and rpsL gene expression. The targeted genes expression analysis and heterogeneous diffusion models demonstrate that particle charge influences nanoparticle mobility and provides significant insight into the intrinsic structural heterogeneity of P. aeruginosa biofilms. These findings suggest that biofilm maturity and particle charge are essential factors to consider when evaluating the transport of nanoparticles within a biofilm matrix.

Airfoil-shaped filament feed spacer for improved filtration performance in water treatment

Optimal spacer design enhances the filtration performance in spiral-wound modules by controlling the local hydrodynamics inside the filtration channel. A novel airfoil feed spacer design fabricated using 3D-printing technology is proposed in this study. The design is a ladder-shaped configuration with primary airfoil-shaped filaments facing the incoming feed flow. The airfoil filaments are reinforced by cylindrical pillars supporting the membrane surface. Laterally, all the airfoil filaments are connected by thin cylindrical filaments. The performances of the novel airfoil spacers are evaluated at Angle of Attack (AOA) of 10^° (A-10 spacer) and 30^° (A-30 spacer) and compared with commercial (COM) spacer. At fixed operating conditions, simulations indicate steady-state hydrodynamics inside the channel for A-10 spacer, while an unsteady state is found for A-30 spacer. Numerical wall shear stress for airfoil spacers is uniformly distributed and has a higher magnitude than the COM spacer. A-30 spacer design is the most efficient in ultrafiltration process with enhanced permeate flux (228%) and reduced specific energy consumption (23%) and biofouling development (74%) as characterized by Optical Coherence Tomography. Results systematically demonstrate the influential role of airfoil-shaped filaments for feed spacer design. Modifying AOA allows localized hydrodynamics to be effectively controlled according to the filtration type and operating conditions.

Extracellular matrix affects mature biofilm and stress resistance of psychrotrophic spoilage Pseudomonas at cold temperature

Psychrotrophic Pseudomonas as the dominant spoilage bacteria, have biofilm forming ability, increasing persistence and contamination in the chilled food. Biofilm formation of spoilage Pseudomonas at cold temperature was documented, however, role of extracellular matrix in mature biofilm and stress resistance of psychrotrophic Pseudomonas are much less abundant. The aim of this study was to investigate the biofilm forming characteristics of three spoilers P. fluorescens PF07, P. lundensis PL28, and P. psychrophile PP26 at 25 °C, 15 °C and 4 °C, and to explore their stress resistance to chemical and thermal treatments of mature biofilms. The results showed that biofilm biomass of three Pseudomonas at 4 °C was significantly higher than that at 15 °C and 25 °C. The secretion of extracellular polymeric substances (EPS) greatly increased in those Pseudomonas under low temperature, of which extracellular protein constituted about 71.03%-77.44%. Compared to 25 °C, the mature biofilms were observed to more aggregation and thicker spatial structure at 4 °C ranging from 42.7 to 54.6 μm, in contrast to 25.0-29.8 μm at 25 °C, especially strain PF07. These Pseudomonas biofilms switched into moderate hydrophobicity, and their swarming and swimming were significantly inhibited at low temperature. Furthermore, the resistance to NaClO and heating at 65 °C apparently enhanced for mature biofilm formed at 4 °C, indicating the difference in EPS matrix production influenced the stress resistance of biofilm. In addition, three strains contained alg and psl operons for exopolysaccharide biosynthesis, and biofilm related genes of algK, pslA, rpoS, and luxR were significantly up-regulated, while flgA gene was down-regulated at 4 °C compared to 25 °C, consistent with the above phenotype changes. Thus, the dramatic increase of mature biofilm and their stress resistance in psychrotrophic Pseudomonas were associated with large secretion and protection of extracellular matrix under low temperature, which provide a theoretical basis for subsequent biofilm control during cold chain.

Identification of Antibiotic Resistance in ESKAPE Pathogens through Plasmonic Nanosensors and Machine Learning

Antibiotic-resistant ESKAPE pathogens cause nosocomial infections that lead to huge morbidity and mortality worldwide. Rapid identification of antibiotic resistance is vital for the prevention and control of nosocomial infections. However, current techniques like genotype identification and antibiotic susceptibility testing are generally time-consuming and require large-scale equipment. Herein, we develop a rapid, facile, and sensitive technique to determine the antibiotic resistance phenotype among ESKAPE pathogens through plasmonic nanosensors and machine learning. Key to this technique is the plasmonic sensor array that contains gold nanoparticles functionalized with peptides differing in hydrophobicity and surface charge. The plasmonic nanosensors can interact with pathogens to generate bacterial fingerprints that alter the surface plasmon resonance (SPR) spectra of nanoparticles. In combination with machine learning, it enables the identification of antibiotic resistance among 12 ESKAPE pathogens in less than 20 min with an overall accuracy of 89.74%. This machine-learning-based approach allows for the identification of antibiotic-resistant pathogens from patients and holds great promise as a clinical tool for biomedical diagnosis.

Ultrasound-Assisted Cavitation Effect on the Biofilm-Forming Ability of Common Dairy Sporeformers

Thermoduric sporeformers survive heat treatment and can form biofilm on contact food surfaces that is difficult to clean and may cause cross contamination to milk products. It was hypothesized that cavitation would influence sporeformers’ ability to attach to contact surfaces and form biofilm. Common dairy sporeformers of Geobacillus stearothermophilus, Bacillus licheniformis, and Bacillus sporothermodurans were individually inoculated in sterile skim milk at the levels of 6.0 log CFU/mL. Inoculated samples were treated by cavitation at 80% amplitudes for 10 min each. Pre and post samples were used to develop biofilms on stainless steel coupons under static conditions. Scanning electron micrograph was used to observe the developed biofilms. All the experiments were conducted in triplicate and were statistically analyzed using a t test. The average counts of spiked milk samples were 7.2, 8.0, and 7.7 logs CFU/mL, respectively, for the three sporeformers. Post-cavitation counts were reduced significantly to 3.4, 4.2, and 3.7 logs CFU/mL, respectively. Pre-cavitation biofilm counts of the three sporeformers were 5.35, 6.42, and 6.5 logs CFU/ cm2, respectively in 72 h. The three sporeformers’ biofilm showed significantly (p < 0.05) lower counts after cavitation of 4.39, 5.44, and lower counts of 4.39 logs CFU/cm2, respectively, for the three organisms. The result showed that G. stearothermophilus formed the least biofilms among others after cavitation. Although the ultrasonication treatment reduced the number of sporeformer bacteria, the survivors still retained the ability to attach to the stainless-steel food contact surfaces.

Role of surface physicochemical properties of pipe materials on bio-clogging in leachate collection systems from a thermodynamic perspective

Bio-clogging in pipes poses a significant threat to the operation of leachate collection systems. Bio-clogging formation is influenced by the pipe materials. However, the relationship between bio-clogging and the physicochemical properties of different pipe materials has not been clarified yet, especially from a thermodynamic aspect. In this study, the dynamic bio-clogging processes in pipes of different materials (high-density polyethylene (HDPE), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene (PE)) were compared, and their correlation with the physicochemical properties was investigated. Results showed that the bio-clogging in HDPE and PVC pipes was more severe than that in PP and PE pipes. In bio-clogging development, the predominant factor changed from the surface roughness to the electron donator parameter (γ^-). In the initial phase, the most severe bio-clogging was observed in the HDPE pipe, which exhibited the highest roughness (432 ± 76 nm). In the later phase, the highest γ^- (2.2 mJ/m²) and protein content (2623.1 ± 33.2 μg/cm²) were observed in the PVC simultaneously. Moreover, the interaction energy indicated that the bacteria could irreversibly and reversibly adhere to the HDPE, whereas irreversible adhesion was observed in the PVC, PP, and PE cases. The findings clarify the thermodynamic mechanism underlying bio-clogging behaviors and provide novel insights into the bio-clogging behaviors in pipes of different materials, which can facilitate the development of effective bio-clogging control strategies.

Ionic Strength-Dependent Attachment of Pseudomonas aeruginosa PAO1 on Graphene Oxide Surfaces

Graphene oxide (GO) is a widely used antimicrobial and antibiofouling material in surface modification. Although the antibacterial mechanisms of GO have been thoroughly elucidated, the dynamics of bacterial attachment on GO surfaces under environmentally relevant conditions remain largely unknown. In this study, quartz crystal microbalance with dissipation monitoring (QCM-D) was used to examine the dynamic attachment processes of a model organism Pseudomonas aeruginosa PAO1 onto GO surface under different ionic strengths (1-600 mM NaCl). Our results show the highest bacterial attachment at moderate ionic strengths (200-400 mM). The quantitative model of QCM-D reveals that the enhanced bacterial attachment is attributed to the higher contact area between bacterial cells and GO surface. The extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory and atomic force microscopy (AFM) analysis were employed to reveal the mechanisms of the bacteria-GO interactions under different ionic strengths. The strong electrostatic and steric repulsion at low ionic strengths (1-100 mM) was found to hinder the bacteria-GO interaction, while the limited polymer bridging caused by the collapse of biopolymer layers reduced cell attachment at a high ionic strength (600 mM). These findings advance our understanding of the ionic strength-dependent bacteria-GO interaction and provide implications to further improve the antibiofouling performance of GO-modified surfaces.

The Influence of the Degree of Thermal Inactivation of Probiotic Lactic Acid Bacteria and Their Postbiotics on Aggregation and Adhesion Inhibition of Selected Pathogens

The study aimed to evaluate the effect of thermal inactivation of potentially probiotic lactic acid bacteria (LAB) strains isolated from food on their ability to compete with pathogenic microorganisms. Five strains of LAB, previously isolated from food and characterized, one commercial reference strain of Lactiplantibacillus plantarum 299v, and two indicator strains of Staphylococcus aureus 25923 and Listeriamonocytogenes 15313 were used in the study. The experiment consisted in applying a stress factor (high temperature: 80 °C, at a different time: 5, 15, and 30 min) to the tested LAB cells to investigate the in vitro properties such as hydrophobicity abilities (against p-xylene and n-hexadecane), auto-aggregation, co-aggregation with pathogens, and inhibition of pathogens adhesion to the porcine gastric mucin. The bacterial strains showed various hydrophobicity to p-xylene (36-73%) and n-hexadecane (11-25%). The affinity for solvents expanded with increasing thermal inactivation time. All LAB isolates were able to auto-aggregate (ranging from 17 to 49%). Bacterial strains subjected to 5 and 15 min of thermal inactivation had the highest auto-aggregation ability in comparison to viable and heat-killed cells for 30 min. The LAB strains co-aggregated with pathogens to different degrees; among them, the highest scores of co-aggregation were observed for L. monocytogenes, reaching 27% (with 15 min of heat-killed LAB cells). All LAB strains reduced the adherence of pathogenic bacteria in the competition test, moreover, heat-killed cells (especially 15 min inactivated) were more efficient than viable cells. The properties of selected LAB strains as moderately heat-stressed forms analyzed in the study increased the prevention of colonization and elimination of pathogenic bacteria in the in vitro model of gastrointestinal tract. The thermal inactivation process may therefore preserve and modifies some characteristics of bacterial cells.

Lipid-Coated Hybrid Nanoparticles for Enhanced Bacterial Biofilm Penetration and Antibiofilm Efficacy

Up to 80% of all infections are biofilm-mediated and they are often challenging to treat as the underlying bacterial cells can become 100- to 1000-fold more tolerant toward antibiotics. Antibiotic-loaded nanoparticles have gained traction as a potential drug delivery system to treat biofilm infections. In particular, lipid-coated hybrid nanoparticles (LCHNPs) were investigated on their capability to deliver antibiotics into biofilms. In this study, LCHNPs composed of a poly(lactic-co-glycolic acid) (PLGA) core and dioleoyl-3-trimethylammonium propane (DOTAP) lipid shell were developed and loaded with vancomycin (Van). In vitro antibacterial and antibiofilm tests were performed to evaluate the antimicrobial efficacy of the LCHNPs. LCHNPs were successfully fabricated with high vancomycin encapsulation and loading efficiencies, and exhibited enhanced antibacterial effects against planktonic Staphylococcus aureus USA300 when compared against Free-Van and Van-PLGANPs. When used to treat USA300 biofilms, Van-LCHNPs eradicated up to 99.99% of the underlying biofilm cells, an effect which was not observed for Free-Van and Van-PLGANPs. Finally, we showed that by possessing a robust DOTAP shell, LCHNPs were able to penetrate deeply into the biofilms.

A novel technique for the preparation of curd (Dahi) by PVDF membrane-based strip

Preparation of curd at home is quite challenging as it requires skills like addition of proper amount of starter culture, maintenance and storage of inoculum for the preparation of good and consistent quality curd. The present work utilized bacterial attachment property of PVDF (Polyvinylidene fluoride) membrane to prepare a strip which can be dipped into milk for the preparation of consistent quality curd. Shelf-life of the strip is around 100 days. The strip prepared curd was well comparable with the curd prepared by the commercial inoculum based on their pH, % lactic acid, % syneresis and bacterial load. Strip of size 5 × 5 cm2 was enough for preparation of 500 mL curd. It was proved by different analytical techniques like AFM, SEM and FTIR that PVDF was not having any leaching property during curd preparation. It can also be used in repeated contact with food products, as it is FDA (Food and Drug Administration) compliant and non-toxic. The curd strip has significant industrial relevance as it is a cost-effective alternative of any commercial inoculum (very expensive) and also meets the demand of consumers with the rising health awareness and busy lifestyles. Further, it is spillage proof, portable, ready-to-use.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-021-05339-3.

Effects of Ethyl Lauroyl Arginate (LAE) on Biofilm Detachment: Shear Rate, Concentration, and Dosing Time

Biofilm formation is one of the main obstacles in membrane treatment. The non-oxidizing biocide ethyl lauroyl arginate (LAE) is promising for mitigating biofilm development on membrane surfaces. However, the operating conditions of LAE and their impact on biofilm detachment are not comprehensively understood. In this study, a real-time in vitro flow cell system was utilized to observe biofilm dispersal caused by the shear rate, concentration, and treatment time of LAE. This confirmed that the biofilm was significantly reduced to 68.2% at a shear rate of 3.42 s−1 due to the increased physical lifting force. LAE exhibited two different mechanisms for bacterial inactivation and biofilm dispersal. Biofilms treated with LAE at sub-growth inhibitory concentrations for a longer time could effectively detach the biofilm formed on the surface of the glass slides, which can be attributed to the increased motility of microorganisms. However, a high concentration (i.e., bactericidal concentration) of LAE should be seriously considered because of the inactivated sessile bacteria and their residual debris remaining on the surface. This study sheds light on the effect of LAE on biofilm detachment and provides insights into biofouling mitigation during the membrane process.

Nutrient starvation intensifies chlorine disinfection-stressed biofilm formation

Bacterial surface attachment and subsequent biofilm expansion represent an essential adaptation to environmental signals and stresses, which are of great concern for many natural and engineered ecosystems. Yet the underlying mechanisms and driving forces of biofilm formation in a chlorinated and nutrient-restricted system remain sketchy. In this study, we coupled an experimental investigation and modeling simulation to understand how chlorination and nutrient limitation conspire to form biofilm using Pseudomonas aeruginosa as a model bacterium. Experimental results showed that moderate chlorination at 1.0 mg/L led to biofilm development amplified to 2.6 times of those without chlorine, while additional nutrient limitation (of 1/50-diluted or 0.4 g/L LB broth culture) achieved 4.6 times increment as compared to those of undiluted scenarios (of 20 g/L LB broth culture) with absence of chlorination after 24 h exposure. Meanwhile, intermediate chlorination stimulated instant flagellar motility and subsequently extracellular polymeric substances (EPS) secretion, particularly under limited nutrient condition (of 1/50-diluted or 0.4 g/L LB broth culture) that retarded chlorine consumption and provoked bacterial nutrient-limitation response. From our simulations, chlorine and resource levels along with associated spatio-temporal variations collectively drove bacterial cell movement and EPS excretion. Our results demonstrated that restraining nutrient intensified chlorination-excited cell movement and EPS production that reinforced biological and cell-surface interactions, thereby encouraging bacterial surface attachment and subsequent biofilm development. The findings provide the insights into the linkage of disinfectant and nutrient-regulated bacterial functional responses with consequent micro-habitats and biofilm dynamics.

Controlling Listeria monocytogenes Growth and Biofilm Formation Using Flavonoids

ABSTRACT

The aim of this study was to investigate the ability of natural plant-derivate products (flavonoid compounds) to inhibit the growth and biofilm-forming ability of Listeria monocytogenes. A collection of 500 synthetic and natural flavonoids were tested individually on strains of L. monocytogenes for their antimicrobial and antibiofilm activity. The flavonoids were tested against a L. monocytogenes cocktail of five strains at a concentration of 100 μM to determine their effect on planktonic growth. The optical density was measured every hour for 24 h at 37°C, and every hour for 48 h at 22°C. A total of 17 flavonoids were chosen for further study because of their ability to significantly reduce the growth of L. monocytogenes up to 97%. An additional two flavonoids that increased planktonic growth were chosen as well to investigate whether they had the same effect on biofilm growth. A lower concentration of flavonoid compounds (50 μM) was selected to investigate the individual effects on L. monocytogenes biofilm formation using (i) stainless steel coupons to quantify biomass using crystal violet staining and (ii) glass slides using confocal laser scanning microscopic (CLSM) imaging to observe the biofilm architecture. The 19 flavonoids showed various levels of L. monocytogenes biofilm growth inhibition, ranging from 2 to 100% after 48 h of incubation at 22 or 10°C. This includes 18 of the 19 flavonoids significantly (P ≤ 0.05) inhibiting L. monocytogenes biofilm formation on stainless steel coupons under at least one of the testing conditions. However, only one flavonoid compound demonstrated significant biofilm inhibition (P ≤ 0.05) under all conditions tested. Furthermore, 8 of the selected 19 flavonoid compounds showed visible reductions through CLSM in L. monocytogenes biofilm formation. Overall, we identified five flavonoid compounds to be promising antibiofilm and antimicrobial agents against L. monocytogenes.

HIGHLIGHTS

Chlorine-resistant bacteria (CRB) in the reverse osmosis system for wastewater reclamation: Isolation, identification and membrane fouling mechanisms

Chlorine disinfection is often used as a pretreatment technology to control biofouling of reverse osmosis (RO) membranes. However, previous studies showed that biofouling of the RO system was aggravated after chlorine disinfection. Chlorine-resistant bacteria (CRB) were presumed to be closely related to the aggravation of fouling caused by chlorine disinfection. In order to analyze the membrane fouling mechanisms of CRB, 5 CRB strains were isolated from the surface of fouled RO membranes for wastewater reclamation, and 3 reference bacterial strains, Sphingopyxis soli BM1-1, Pseudomonas aeruginosa PAO1 and Escherichia coli CGMCC1.3373, were selected for comparative study. The chlorine resistance, membrane fouling potential, secretion and adhesion characteristics of these strains were evaluated. Among these isolated strains, 3 strains showed much higher chlorine resistance than PAO1 under the condition of 0.5, 2, 5 mg/L-Cl2, especially Bacillus CR19 and Bacillus CR2. Furthermore, a significant positive correlation was found between membrane fouling potential and chlorine resistance of all the strains in this study. The membrane fouling potential of the above 8 strains increased monotonically with the increase of chlorine resistance (under the condition of 0.5 mg/L-Cl2). Serious fouling caused by extracellular substances was observed in biofouling layers of the strains with high chlorine resistance, which lead to more severe flux decline. Extracellular polymeric substances (EPS) amount per cell was found to be the main factor related to the chlorine resistance as well as the fouling potential. Computational fluid dynamics (CFD) simulation was used to demonstrate the filtration resistance induced by the secretion of EPS. However, CRB with higher EPS amount may not show higher membrane adhesion potential, and thus may not be the dominant strain on the RO membranes before chlorine disinfection. These CRB with high fouling potential but low membrane adhesion potential, such as Bacillus CR19 and Bacillus CR2, may become the dominant bacteria on the membrane surface after chlorine disinfection and thus aggravate membrane fouling significantly.

Facilitating biofilm formation of Pseudomonas aeruginosa via exogenous N-Acy-L-homoserine lactones stimulation: Regulation on the bacterial motility, adhesive ability and metabolic activity

The N-Acy-L-homoserine lactones (AHLs) mediated quorum sensing (QS) system exhibited important ecological significance in bacterial biofilm formation. However, the previous studies mainly focused on indigenous AHLs while the role of exogenous AHLs has remained unclear. This study evaluated the roles of exogenous AHLs on the biofilm formation of Pseudomonas aeruginosa. Both the C6-HSL and C8-HSL promoted the biofilm formation of P. aeruginosa with an enhancement of 2.47 and 1.88 times, respectively. Further analysis showed that exogenous AHLs contributed greatly to the adhesive ability instead of growth rate. Also, the bacterial motility and metabolic activities were significantly improved by AHLs. Moreover, the microbial functional genes (i.e. lasI, lasR, rhlI and rhlR) involved in regulating the biofilm formation were highly expressed in AHLs reactors. These findings expanded the knowledge of AHLs functions in mediating biofilm formation, and provided insightful guidance on the biofilm regulation in the wastewater treatment via biofilm technology.

Anti-biofouling efficacy of three home and personal care product preservatives: Pseudomonas aeruginosa biofilm inhibition and prevention

Due to increasing water scarcity, it is essential to determine cost-effective and efficient methods of producing potable water, especially ones that utilize non-traditional sources. Although reverse osmosis (RO) shows promise as a key-player in mitigating water scarcity, it is limited by biofouling. It is therefore integral to identify effective antifoulants that also do not damage the membrane, cause resistance, or negatively impact human health and the environment. Potential antifoulants include preservatives used in home and personal care products. It is hypothesized that safer preservatives can be applied to RO systems to remove or prevent biofouling. Three preservatives including methylisothiazolinone (MIT), phenoxyethanol (PE), and sodium benzoate (SB) were tested via antimicrobial susceptibility tests against P. aeruginosa biofilms grown in 96-well plates to investigate both biofilm prevention and biofilm removal. Data were collected in the form of minimum biofilm inhibitory concentration (MBIC) and minimum biofilm eradication concentration (MBEC), respectively. MIT was the most effective of the three preservatives but also poses the highest hazard to human health and the environment. Due to efficacy and safety concerns, MIT, PE, and SB are not the final solution; however, a process was demonstrated for determining the efficacy of novel, safer antifoulants. Ultimately, further investigations into safer antifoulants, paired with a greater understanding of biofilm removal and prevention doses will help make RO a better solution for water scarcity.

Antibacterial and anti-biofilm activities of paeonol against Klebsiella pneumoniae and Enterobacter cloacae

Paeonol, the active ingredient of Paeonia lactiflora root bark, is widely used in traditional Chinese medicine. Few studies have reported the antibacterial activity of paeonol against bacterial pathogens. In this study, the antibacterial and anti-biofilm performance of paeonol against Klebsiella pneumoniae and Enterobacter cloacae was investigated as well as its mechanisms of action. Paeonol effectively inhibited the growth of K. pneumoniae and E. cloacae with a minimum inhibitory concentration of 64 μg ml^-1 and it was shown to disrupt the integrity of bacterial cell membranes, and alter cell morphology. Moreover, paeonol exhibited a potent inhibitory effect against adhesion and biofilm formation by K. pneumoniae and E. cloacae. In particular, paeonol efficiently compromised cells within biofilms, and dispersed mature biofilms. Therefore, the present study suggests that paeonol is a promising alternative antibacterial and anti-biofilm agent for combating infections caused by planktonic and biofilm cells of K. pneumoniae and E. cloacae.

Microbial Fabrication of Nanomaterial and Its Role in Disintegration of Exopolymeric Matrices of Biofilm

Bacterial biofilms are responsible for the development of various chronic wound-related and implant-mediated infections and confer protection to the pathogenic bacteria against antimicrobial drugs and host immune responses. Hence, biofilm-mediated chronic infections have created a tremendous burden upon healthcare systems worldwide. The development of biofilms upon the surface of medical implants has resulted in the failure of various implant-based surgeries and therapies. Although different conventional chemical and physical agents are used as antimicrobials, they fail to kill the sessile forms of bacterial pathogens due to the resistance exerted by the exopolysaccharide (EPS) matrices of the biofilm. One of the major techniques used in addressing such a problem is to directly check the biofilm formation by the use of novel antibiofilm materials, local drug delivery, and device-associated surface modifications, but the success of these techniques is still limited. The immense expansion in the field of nanoscience and nanotechnology has resulted in the development of novel nanomaterials as biocidal agents that can be either easily integrated within biomaterials to prevent the colonization of microbial cells or directly approach the pathogen overcoming the biofilm matrix. The antibiofilm efficacies of these nanomaterials are accomplished by the generation of oxidative stresses and through alterations of the genetic expressions. Microorganism-assisted synthesis of nanomaterials paved the path to success in such therapeutic approaches and is found to be more acceptable for its "greener" approach. Metallic nanoparticles functionalized with microbial enzymes, silver-platinum nanohybrids (AgPtNHs), bacterial nanowires, superparamagnetic iron oxide (Fe₃O₄), and nanoparticles synthesized by both magnetotactic and non-magnetotactic bacteria showed are some of the examples of such agents used to attack the EPS.

Microbial Fabrication of Nanomaterial and Its Role in Disintegration of Exopolymeric Matrices of Biofilm

Bacterial biofilms are responsible for the development of various chronic wound-related and implant-mediated infections and confer protection to the pathogenic bacteria against antimicrobial drugs and host immune responses. Hence, biofilm-mediated chronic infections have created a tremendous burden upon healthcare systems worldwide. The development of biofilms upon the surface of medical implants has resulted in the failure of various implant-based surgeries and therapies. Although different conventional chemical and physical agents are used as antimicrobials, they fail to kill the sessile forms of bacterial pathogens due to the resistance exerted by the exopolysaccharide (EPS) matrices of the biofilm. One of the major techniques used in addressing such a problem is to directly check the biofilm formation by the use of novel antibiofilm materials, local drug delivery, and device-associated surface modifications, but the success of these techniques is still limited. The immense expansion in the field of nanoscience and nanotechnology has resulted in the development of novel nanomaterials as biocidal agents that can be either easily integrated within biomaterials to prevent the colonization of microbial cells or directly approach the pathogen overcoming the biofilm matrix. The antibiofilm efficacies of these nanomaterials are accomplished by the generation of oxidative stresses and through alterations of the genetic expressions. Microorganism-assisted synthesis of nanomaterials paved the path to success in such therapeutic approaches and is found to be more acceptable for its "greener" approach. Metallic nanoparticles functionalized with microbial enzymes, silver-platinum nanohybrids (AgPtNHs), bacterial nanowires, superparamagnetic iron oxide (Fe3O4), and nanoparticles synthesized by both magnetotactic and non-magnetotactic bacteria showed are some of the examples of such agents used to attack the EPS.

Water flushing irremovable biofilms on support material in dynamic membrane bioreactor: Formation, composition, and microbial community

Dynamic membrane bioreactors mainly rely on the in-situ formed biofilms on support materials to reject fine particles in water. The development of irremovable biofilms on support materials can decrease the cleaning efficiency when removing the unwanted biofilms with low permeability by water flushing. In the present study, the initial formed biofilms on support materials at 5-day solids retention time (SRT) were removable by water flushing. After repeated cleaning with off-line water flushing during operation, however, irremovable biofilms were developed gradually inside the mesh pores and thus, rapid rising in transmembrane pressure occurred in every one to three days. At 20-day SRT, the biofilms formed on support materials with the same operation time were still removable. Therefore, both low SRT and repeated water flushing promoted the formation of irremovable biofilms on support materials. Further study found that the composition and microbial community between the irremovable and removable biofilms were significantly different, which differentiated the biofilm adhesion and removability. The irremovable biofilms had a greater faction of proteins (49.0%) and β-d-glucopyranose polysaccharides (17.8%) in extracellular polymeric substance (EPS), while the removable biofilms had a greater fraction of α-d-glucopyranose polysaccharides. After repeated cleaning with off-line water flushing during operation, Nitrospiraceae was selectively enriched in the irremovable biofilms at a relative abundance of 39.1%, which could have resulted in the particular EPS matrix that strengthened the biofilm adhesion.

Biofouling detection methods that are widely applicable and useful across disciplines: a mini-review

Biofouling, or the build-up of microorganisms in a biofilm at the solid-water or water-air interface, is an interdisciplinary problem. Biofouling causes various issues including clogging systems, contaminating devices, and creating infections that are extremely difficult to treat, to name but a few. Therefore, engineers, pharmacologists, microbiologists, wastewater treatment operators, chemists, food preservative formulators, home and personal care product formulators, and toxicologists all play a role in studying and have an interest in solving biofouling. High-throughput studies on biofilm prevention and removal can take the form of biofilm antimicrobial microdilution susceptibility (BAMS) tests. Due to vested interests of many disciplines, the results from these tests should be applicable and useful to each discipline. This critical review analyses the focuses, biological implications, and metrics required by each discipline. The possible detection methods that could satisfy each desired metric are then summarized. The detection methods were analysed in order to recommend two methods of biofilm detection, Crystal Violet stain and the LIVE/DEAD BacLight stain, which correspond with three metrics including total biomass, log reduction, and the MIC, BPC, MBIC, MBC, BBC, and/or MBEC values. Determining these three metrics for each BAMS test will allow this type of research to be widely applicable and useful across many disciplines.

Enhanced Water Permeability and Antifouling Property of Coffee-Ring-Textured Polyamide Membranes by In Situ Incorporation of a Zwitterionic Metal-Organic Framework

Modulation of the polyamide structure is critically important for the reverse-osmosis performance of thin-film composite (TFC) membranes in the field of water reuse and desalination. Herein, zwitterionic nanoparticles of zeolitic imidazolate framework-8 (PZ@ZIF-8) were fabricated and incorporated into the polyamide active layer through the interfacial polymerization method. A hydrophilic, zwitterionic coffee-ring structure was formed on the surface of polyamide thin-film nanocomposite (TFN) membranes due to the adjusted diffusion rate of m-phenylenediamine (MPD) from the aqueous phase into the organic phase during the interfacial polymerization process. Surface characterization demonstrated that the coffee-ring structure increased the amounts of water transport channels on the membrane surface and the intrinsic pores of PZ@ZIF-8 maintained the salt rejection. Antifouling and bactericidal activities of TFN membranes were enhanced remarkably owing to the bacterial-"defending" and bacterial-"attacking" behaviors of hydrophilic and zwitterionic groups from PZ@ZIF-8 nanoparticles. This work would provide a promising method for the application of MOFs to enhance the bio-/organic-fouling resistance of TFN membranes with high water permeation and salt rejection.

Patterns of bacterial motility in microfluidics-confining environments

Understanding the motility behavior of bacteria in confining microenvironments, in which they search for available physical space and move in response to stimuli, is important for environmental, food industry, and biomedical applications. We studied the motility of five bacterial species with various sizes and flagellar architectures (Vibrio natriegens, Magnetococcus marinus, Pseudomonas putida, Vibrio fischeri, and Escherichia coli) in microfluidic environments presenting various levels of confinement and geometrical complexity, in the absence of external flow and concentration gradients. When the confinement is moderate, such as in quasi-open spaces with only one limiting wall, and in wide channels, the motility behavior of bacteria with complex flagellar architectures approximately follows the hydrodynamics-based predictions developed for simple monotrichous bacteria. Specifically, V. natriegens and V. fischeri moved parallel to the wall and P. putida and E. coli presented a stable movement parallel to the wall but with incidental wall escape events, while M. marinus exhibited frequent flipping between wall accumulator and wall escaper regimes. Conversely, in tighter confining environments, the motility is governed by the steric interactions between bacteria and the surrounding walls. In mesoscale regions, where the impacts of hydrodynamics and steric interactions overlap, these mechanisms can either push bacteria in the same directions in linear channels, leading to smooth bacterial movement, or they could be oppositional (e.g., in mesoscale-sized meandered channels), leading to chaotic movement and subsequent bacterial trapping. The study provides a methodological template for the design of microfluidic devices for single-cell genomic screening, bacterial entrapment for diagnostics, or biocomputation.

Fouling control in reverse osmosis for water desalination & reuse: Current practices & emerging environment-friendly technologies

Reverse Osmosis (RO) is becoming increasingly popular for seawater desalination and wastewater reclamation. However, fouling of the membranes adversely impacts the overall process efficiency and economics. To date, several strategies and approaches have been used in RO plants and investigated at the laboratory-scale for their effectiveness in the control of different fouling types. Amid growing concerns and stringent regulations for the conservation of environment, there is an increasing trend to identify technologies that are effective in fouling mitigation as well as friendly to the environment. The present review elaborates on the different types of environment-friendly technologies for membrane fouling control that are currently being used or under investigation. It commences with a brief introduction to the global water crisis and the potential of membrane-based processes in overcoming this problem. This is followed by a section on membrane fouling that briefly describes the major fouling types and their impact on the membrane performance. Section 3 discusses the predominant fouling control/prevention strategies including feedwater pretreatment, membrane and spacer surface modification and membrane cleaning. The currently employed techniques are discussed together with their drawbacks, with some light being shed on the emerging technologies that have the ability to overcome the current limitations. The penultimate section provides a detailed discussion on a variety of eco-friendly/chemical free techniques investigated to control different fouling types. These include both control and prevention strategies, for example, bioflocculation and electromagnetic fields, as well as remediation techniques such as osmotic backwashing and gas purging. In addition, quorum sensing has been specifically discussed for biofouling remediation. The promising findings from different studies are presented followed by a discussion on their drawbacks and limitations. The review concludes with a need for carrying out fundamental studies to develop better understanding of the eco-friendly processes discussed in the penultimate section and their optimization for possible integration into the RO plants.

AHLs-mediated quorum sensing threshold and its response towards initial adhesion of wastewater biofilms

Quorum sensing (QS) plays a crucial role during initial biofilm formation, however the QS threshold and the response of biofilm formation towards N-acyl-homoserine lactones (AHLs) remains largely unknown due to the limitation of nondestructive online methods for monitoring bacterial adherence and the complexity of QS system, which limits the application of QS signal reagents in biofilm reactors. In this study, bacterial QS threshold and its response of biofilm formation to AHLs in purely cultured Sphingomonas rubra biofilm as well as in three different wastewater biofilms #1-3 were investigated via real time cell analysis (RTCA). The main perspective was to study the biomass adherence in response to 12 different forms of AHLs at different concentrations. Results showed that bacterial adhesion was significantly improved by exogenous AHLs with the maximum increase of 2.26-, 2.36-, 2.52-, and 2.80- times biomass production in the four respective biofilms. Although the preferred form of AHL differed for various biofilms, the long-chain AHLs (12-14 carbons) resulted in an overall improvement of bacterial adhesion due to their stronger hydrophobicity and hydrolysis resistance. In addition, bacterial QS threshold of AHLs was observed to have a wide range of concentration from 10 ng/L to 10 μg/L. Meanwhile, QS response time to AHLs also showed a significant difference in different biofilms. Biofilm #2 inoculated with bulking sludge had lower QS threshold of 10 ng/L and faster response to most AHLs that is less than 6 h. Thus, considering the improvement of biofilm adhesion by AHLs, 10 ng/L of C12-HSL, 10 ng/L of C12-HSL, and 10 ng/L of C6-HSL were preferentially selected for wastewater biofilms #1-3 respectively. Unexpectedly, adding high-concentration of AHLs detected in sludges did not significantly improved the bacterial adhesion. Infact the addition of these AHLs at low concentrations or even undetected concentrations substantially improved bacterial adhesion, which could be explained by bacterial communities composition. According to the Pearson correlation analysis, 62% of the top 50 most abundant genera in bacterial communities were significantly negatively related to the response time of multiple AHLs, representing their fast QS response. The QS bacteria, Dechloromonas and Nitrospira have fast QS response for C4-HSL and C8-HSL while, Comamonadaceae has fast QS response for 3OC8-HSL, 3OC10-HSL, 3OC12-HSL, and 3OC14-HSL. In contrast, the rest 38% of the top most abundant genera, such as Ferruginibacter, Hyphomicrobium, and Terrimonas quickly responded to only one AHL, showing significant negative relationship with the response time of C6-HSL. Overall, this study provides an effective and convenient means to select appropriate AHL reagents to promote bacterial adhesion in biofilm systems. Moreover, it also suggests that exogenous AHLs may be useful in improving the settling property of bulking sludge.

2-Aminoimidazole Reduces Fouling and Improves Membrane Performance

Biofouling is difficult to control and hinders the performance of membranes in all applications but is of particular concern when natural waters are purified. Fouling, via multiple mechanisms (organic-only, biofouling-only, cell-deposition-only, and organic+biofouling), of a commercially available membrane (control) and a corresponding membrane coated with an anti-biofouling 2-aminoimidazole (2-AI membrane) was monitored and characterized during the purification of a natural water. Results show that the amount of bacterial cell deposition and organic fouling was not significantly different between control and 2-AI membranes; however, biofilm formation, concurrent or not with other fouling mechanisms, was significantly inhibited (95-98%, p<0.001) by the 2-AI membrane. The limited biofilm that formed on the 2-AI membrane was weaker (as indicated by the polysaccharide to protein ratio) and thus presumably easier to remove. The conductivity rejection by the 2-AI and control membranes was not significantly different throughout the 75-hour experiments, but the rejection of dissolved organic carbon by biofouled (biofouling-only, cell-deposition-only, and organic+biofouling) 2-AI membranes was statistically higher (10-12%, p=0.003-0.07). When biofouled, the water permeance of the 2-AI membranes decreased significantly less (p<0.05) over 75 hours than that of the control membranes, whether or not other additional types of fouling occurred concurrently. Despite the initially lower water permeances of 2-AI membranes (11% lower on average than controls), the 2-AI membranes outperformed the controls (10-11% higher average water permeance) after biofilm formation occurred. Overall, 2-AI membranes fouled less than controls without detriment to water productivity and solute rejection.

Influence of the Intrinsic Characteristics of Cementitious Materials on Biofouling in the Marine Environment

Coastal marine ecosystems provide essential benefits and services to humanity, but many are rapidly degrading. Human activities are leading to significant land take along coastlines and to major changes in ecosystems. Ecological engineering tools capable of promoting large-scale restoration of coastal ecosystems are needed today in the face of intensifying climatic stress and human activities. Concrete is one of the materials most commonly used in the construction of coastal and marine infrastructure. Immersed in seawater, concretes are rapidly colonized by microorganisms and macroorganisms. Surface colonization and subsequent biofilm and biofouling formation provide numerous advantages to these organisms and support critical ecological and biogeochemical functions in the changing marine environment. The new challenge of the 21st century is to develop innovative concretes that, in addition to their usual properties, provide improved bioreceptivity in order to enhance marine biodiversity. The aim of this study is to master and clarify the intrinsic parameters that influence the bioreceptivity (biocolonization) of cementitious materials in the marine environment. By coupling biofilm (culture-based methods) and biofouling (image-analysis-based method and wet-/dry-weight biomass measurement) quantification techniques, this study showed that the application of a curing compound to the concrete surface reduced the biocolonization of cementitious materials in seawater, whereas green formwork oil had the opposite effect. This study also found that certain surface conditions (faceted and patterned surface, rough surface) promote the bacterial and macroorganism colonization of cementitious materials. Among the parameters examined, surface roughness proved to be the factor that promotes biocolonization most effectively. These results could be taken up in future recommendations to enable engineers to eco-design more eco-friendly marine infrastructure and develop green-engineering projects.

Structural preferences of an anti-fouling peptide: From single chain to small molecular assemblies

The structural features of a tripeptide constituted by two different non-coded amino acids, 3,4-dihydroxy-L-phenylalanine (L-DOPA) and 4-fluoro-Phenylalanine, (Phe(4F)), have been investigated by means of classical mechanics simulations. This tripeptide had been characterised as an antifouling agent with great adhesion capabilities. In this work, its conformational preferences have been described in two different environments (gas phase and water solution), at three different pHs and with different degrees of terminal capping. At the same time, the structural dynamics of small aggregates of the tripeptide have been investigated and their ability to stabilise β-sheet based assemblies has been studied. The reported results describe the complexity of the tripeptide conformational preferences due to both the amphiphilic nature of its side chains, and the effect of the ionisation state resulting from the solution conditions. The investigations performed with small tripeptide assemblies in water solution reproduced the previously reported structural features, such as the polymorphism of its aggregates as a function of the pH. At edge pH values, the electrostatic screening imposed by the ions present in the solution facilitates the aggregation of the tripeptide chains, while at neutral pH and low concentrations of ionised species, the polar groups and the hydrogen bond capable groups impose their strength and lead to the disaggregation of the peptide clusters by favouring the solvation of individual chains rather than stabilising the aggregated states.

Effect of localized hydrodynamics on biofilm attachment and growth in a cross-flow filtration channel

Biofilm attachment and growth in membrane filtration systems are considerably influenced by the localized flow inside the feed channel. The present work aims to map the biofilm attachment/growth mechanism under varying flow conditions. Effect of varying clearance region (space between the spacer filament and membrane surface) on biofouling pattern is investigated by using three 3D-printed pillar spacers having different filament diameters of 340, 500, and 1000 µm while maintaining the same pillar orientation, diameter and height. Direct Numerical Simulations (DNS) and Optical Coherence Tomography (OCT) were carried out to accurately predict the local hydrodynamics behavior and in-situ monitor the biofilm formation. On spacer filaments, biofouling attachment is primarily observed in the regions where low and non-fluctuating shear stresses are present. Conversely, on membrane surface, highest biofouling attachment was observed under spacer filaments where high shear stresses are prevalent along with low clearance height. Furthermore, as filtration time progresses, the biofilm grows faster on the membrane in the center of spacer cells where low shear stress with steady hydrodynamics conditions are prevalent. The proposed hydrodynamics approach envisages a full spectrum of spacer design constraints that can lead to intrinsic biofilm mitigation while improving filtration performance of membranes based water treatment.