Graphene oxide-cation interaction: Inter-layer spacing and zeta potential changes in response to various salt solutions

Possible protective effect of natural flavanone naringenin-reduced graphene oxide nanosheets on nonalcoholic fatty liver disease

Utilizing naringenin as a safe, natural compound for reducing graphene oxide and to determine whether Nar-RGO more effectively mitigates the harmful effects of HFFD-induced NAFLD compared to crude naringenin. Using a straightforward experimental setup, we utilize the bioactive flavonoid naringenin (NAR) as the reducing agent to synthesize naringenin-reduced graphene oxide nanosheets (Nar-RGO). Naringenin loading on graphene oxide was validated using electroscopic methods (SEM and TEM) and zeta potential measurements. Utilization of reduced graphene oxide for naringenin encapsulation resulted in a significant improvement in hepatic steatosis, insulin resistance, oxidative stress, and signs of inflammation in HFFD-induced NAFLD compared to crude naringenin. This study demonstrates that Nar-RGO exhibits significantly greater efficacy compared to free naringenin. Therefore, it can be used as a promising medicine in counteracting high-fat-fructose diet (HFFD)-induced NAFLD.

Gold Nanoparticle Incorporated Graphene Oxide as a SERS Platform for Ultratrace Antibody Free Sensing of the Cancer Biomarker CEA

A simple, fast, low-cost, and efficient method is designed for the synthesis of graphene oxide (GO) (20 nm) from graphite using a strong oxidant Ce(IV). GO is further modified with gold nanoparticles (AuNPs) (5-8 nm) to generate a AuGO nanocomposite (25 nm). Raman spectral analyses confirm that the synthesized AuGO has a potential selective sensing ability for the cancer biomarker carcinoembryonic antigen (CEA) in serum. Sensing assays are also carried out in the presence of high concentrations of glucose, cholesterol, and insulin using this method, which become significantly elevated in conditions of different pathophysiological disorders. Ultratrace antibody free sensing of CEA in serum is achieved using surface-enhanced Raman spectroscopy with an amazing LOD of 12.5 fg/mL. The interaction between CEA and AuGO is further established using Raman, fluorescence, circular dichroism spectroscopy, and theoretical studies. The specificity of sensing is tested by checking the response in the presence of other cancer biomarkers, such as CA 19-9, CA 125, and PSA, which do not show any signal enhancement with AuGO in Raman spectroscopy.

Catalytic efficiency of GO-PANI nanocomposite in the synthesis of N-Aryl-1,4-Dihydropyridine and hydroquinoline derivatives

In this research, graphene oxide-polyaniline (GO-PANI) nanocomposite was successfully synthesized and its catalytic performance was evaluated for the synthesis of N-aryl-1,4-dihydropyridine (1,4-DHP) and hydroquinoline derivatives. The GO nanosheets were prepared using the Hummers' method, and in-situ polymerization of aniline was conducted with ammonium persulfate (APS) serving as the polymerization initiator. The synthesized nanocomposite demonstrated notable efficiency, achieving yields of 80-94% for 1,4-DHP derivatives and 84-96% for hydroquinoline derivatives. The GO-PANI nanocomposite was thoroughly characterized by various techniques, including Fourier Transforms Infrared spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), X-ray Diffraction analysis (XRD), Thermogravimetric analysis (TGA), and Energy Dispersive X-ray spectroscopy (EDS), all of which confirmed the successful synthesis of the nanocomposite. Furthermore, after ten cycles of reusability testing, the nanocomposite retained its high catalytic performance with no significant degradation. This findings indicate that the GO-PANI nanocomposite is a promising non-metal catalyst for the synthesis of N-aryl-1,4-dihydropyridine and hydroquinoline derivatives.

Stable Zinc Metal Battery Development: Using Fibrous Zirconia for Rapid Surface Conduction of Zinc Ions With Modified Water Solvation Structure

The two most critical technical issues in Zn-based batteries, dendrite formation, and hydrogen evolution reaction, can be simultaneously addressed by introducing negatively charged fibrous ZrO2 as a separator. Electron redistribution between ZrO2 and Zn2+ ions renders the ZrO2 surface a preferred adsorption site for Zn2+ ions, making surface conduction the primary ion-transport mode. Surface conduction enables fibrous ZrO2 to exhibit a 6.54 times higher single-Zn-ion conductivity than that of conventional glass fiber, minimizing the concentration gradient of Zn2+ and suppressing dendrite formation. Additionally, strong Zr─O─Zn bonding stabilizes the Zn2+ ions with fewer solvated H2O molecules (≈2), preventing water molecules from approaching the electrode surface, as evidenced by a 58.8% decrease in the hydrogen evolution rate. Consequently, the cycling stability of a fibrous-ZrO2-based Zn/Zn symmetric cell (3000 h at 1 mAh cm-2 and 5 mA cm-2) is approximately ten times greater than that of the conventional variant. Furthermore, a fibrous-ZrO2-based Zn-I2 full cell exhibits a notably high energy density (271.4 Wh kg-1) as well as a long lifespan (≈5000 cycles) at an ultrahigh current density (4 A g-1).

Shear-aligned graphene oxide nanosheets incorporated PVDF composite membranes for selective dye rejection with high water flux

Membrane technology is crucial in addressing water pollution challenges, particularly in removing dyes from wastewater. This study presents a novel approach to fabricating shear-aligned graphene oxide (GO) nanosheets incorporated polyvinylidene fluoride (PVDF) membranes for achieving exceptional dye rejection efficiency while maintaining high water flux. The membranes were prepared by dispersing graphene oxide within a PVDF matrix and subsequent subjection to shear alignment techniques. Shear and flow-induced alignment were explored to achieve precise and controlled alignment of graphene oxide flakes within the PVDF matrix. The resulting membranes exhibited enhanced structural integrity and optimized molecular packing of PVDF and GO, enabling them to selectively reject dyes while allowing efficient water permeation. The fabricated membranes were extensively characterized using appropriate testing methods. The results demonstrated that the shear-aligned GO sheets infused PVDF composite membranes exhibited outstanding dye rejection (96-99%) performance, surpassing conventional membranes while maintaining high water flux. This innovative membrane fabrication approach holds significant promise for advanced water treatment applications, offering a sustainable solution for selective dye removal and efficient water purification.

Nanochannel Stability of Chemically Converted Graphene Oxide Membranes

Chemically converted graphene oxide laminate membranes, which exhibit stable interlayered nanochannels in aqueous environments, are receiving increasing attention owing to their potential for selective water and ion permeation. However, how the molecular properties of conversion agents influence the stabilization of nanochannels and how effectively nanochannels are stabilized have rarely been studied. In this study, mono-, di-, and tri-saccharide molecules of glucose (Glu), maltose (Glu2), and maltotriose (Glu3) are utilized, respectively, to chemically modify graphene oxide (GO). The aim is to create nanochannels with different levels of stability and investigate how these functional conversion agents affect the separation performance. The effects of the property differences between different conversion agents on nanochannel stabilization are demonstrated. An agent with efficient chemical reduction of GO and limited intercalation in the resulting nanochannel ensures satisfactory nanochannel stability during desalination. The stabilized membrane nanochannel exhibits a permeance of 0.69 L m-2 h-1 bar-1 and excellent Na2SO4 rejection of 96.42%. Furthermore, this optimized membrane nanochannel demonstrates enhanced stability under varying external conditions compared to the original GO. This study provides useful information for the design of chemical conversion agents for GO nanochannel stabilization and the development of nanochannel membranes for precise separation.

Synthesis, characterization and application of chitosan functionalized and functional graphene oxide membranes for desalination of water by pervaporation

The use of graphene sheets in water treatment is increasing due to its adsorption capacity, reactivity, catalytic action and surface area. The challenges linked to wastewater treatment are vast due to the constant influx of various pollutants. Can the challenges of water desalination and purification be encountered by graphene-based composites and membranes?.The current work describes the synthesis of graphene oxide (GO) using modified Hummers' method. GO was functionalized with chitosan and used as adsorbents. On the other hand, it was reported that the surface of thin-film-composite (TFC) polyamide membranes was modified in order to desalinate highly saline water using pervaporation. The findings showed that GO synthesized by modified Hummers' method has a greater capacity for the adsorption of sodium ion and have better regeneration performance. Functionalization with chitosan increased adsorption capacity from 680.2 to 740.5 mg/g at the initial concentration of 45,000 mg/l of Na+ ions. On the other hand, modification in membrane comprises the chlorine treatment of surface of polyamide membrane. Layer-by-layer (LbL) deposition of positively charged polyethyleneimine (PEI) and negatively charged graphene oxide (GO) was followed. The PEI/GO LbL membrane's pure water flux was twice as high as compare to the original membrane. The synthesized membrane was tested against the aqueous solutions containing Na2SO4, MgSO4, NaCl and MgCl2 salts for their desalination. At different concentrations, a water flux of 8.9 kg/m2h with a huge salt rejection (>99.9%) was attained for every tested salt. It was observed that CS functionalized GO and GO membrane showed higher adsorption capacity and improved regeneration performance can be measured as an operational and active adsorbent for sea water desalination.

Aggregation of graphene oxide upon the stripping of oxidized debris: An experimental and molecular dynamics simulation study

The most recent structural study of graphene oxide (GO) indicates that the oxidized debris (ODs) adhered to as-prepared GO will strip in certain aquatic settings. The impact of ODs stripping on the characteristics of GO has been widely reported, but its effects on GO aggregation have received less attention. Here, the influence of OD stripping on the GO aggregation property was identified, and the aggregation of as-prepared GO and GO upon OD stripping was compared. Upon ODs stripping, the pKa values of GO shifted from 3.91, 6.25, and 9.84 to 4.54, 6.65, and 10.21, respectively. Further analysis indicated the removal of ODs reduced the net negative charge and improved the hydrophobicity of GO, hence promoting the aggregation of GO. The acceleration of GO-Ca2+-OD aggregate formation was facilitated by the collective effects of ODs stripping, functional group deprotonation, double layer compression, OD bridging, and charge neutralization. The metal ions and stripped ODs attach to GO edges and link GO, which perform like bridges and contribute to further aggregation. In general, the existence of ODs adds complexity to the constructions and characteristics of GO, and it is important to take this into account while evaluating the aggregation characteristic of GO-based materials.

Highly sensitive humidity sensor based on composite film of partially reduced graphene oxide and bacterial cellulose

Breathing is an important physiological activity of human body, which not only reflects the state of human movement, but also is one of the important health indicators. Breathing can change the concentration of water molecules, so monitoring humidity has gradually become a hot topic in modern research. In this study, a humidity sensing composite film with high sensitivity and short response time was made by using the mixture of graphene oxide (GO) and bacterial cellulose (BC) with simple dry film-forming method. L-ascorbic acid was used as reducing agent to reduce GO and improve the conductivity of GO/BC composite film (BG). The influence of different BC contents and the different reduction degree on the resistance change rate of composite film was investigated in details. The maximum resistance change rate of partially reduced BG humidity sensitive composite film reached up to 94%, and the response and recovery time were 13 s and 47 s respectively. Furthermore, the sensor shows obvious resistance change in noncontact sensing test and different breathing states. This kind of humidity sensitive film with fast response and high sensitivity has great potential in human health monitoring and noncontact sensing, and is of great significance in promoting health detection and intelligent life.

Ionic regulation whey protein composition on membrane fouling during ultrafiltration process analyzed by HPLC

In order to meet the market demand and avoid the increase of operation amount and cleaning cost in the process of ultrafiltration, it is particularly important to find more practical and efficient methods to control and improve membrane fouling. In this study, the ions in the ultrafiltration process were regulated to affect membrane surface proteins composition (lactoferrin, α-lactalbumin, β-lactoglobulin A and β-lactoglobulin B) and delay membrane fouling. It was found that Na+ (21 mmol/L), Zn2+ (0.25 mmol/L) and K+ (44 mmol/L) was added at 4 min, 8 min and 12 min, respectively during ultrafiltration process. The continuous regulation slowed down the decline rate of membrane flux and reduced the content of α-lactalbumin, β-lactoglobulin A and β-lactoglobulin B on the membrane surface analyzed by HPLC. This could reduce the irreversible membrane fouling of proteins cake resistance. Furthermore, the ions concentration was also investigated after filtration. The concentration of K+ was increased significantly and other ions concentration was not significantly changed after continuous regulation such Na+, Mg2+, Zn2+ and Ca2+ compared to control. Therefore, dynamic ionic regulation of whey protein ultrafiltration process is a simple and effective method, which provides technical theoretical basis for optimizing and improving membrane technology.

Multinary nanocomposite of GO@SrO@CoCrO3@FeCr2O4@SnO2@SiO2 for superior electrochemical performance and water purification applications

Novel multinary nanocomposite using solvothermal method synthesized and studied for their use in supercapacitors and photocatalysis to degrade pollutants using characterization techniques XRD, SEM, EDX, FTIR, Raman, UV-Vis, Zeta potential and photoluminescence spectroscopy whereas electrochemical testing via EIS, CV and GCD analysis. Average crystalline size of 20.81 nm measured from XRD whereas EDX confirms GO suppression within nanocomposite. Mixed matrix like morphology is observable from SEM micrographs. The composite exhibited a band gap of 2.78 eV that could degrade MB dye at 94 % under direct sunlight consistent with first-order kinetics. Multiple distinctive peaks in FTIR spectra indicates various functional groups exsistence in the material alongwith zeta potential value of -17.9 mV. Raman spectra reveals D-band shifting to value 1361 cm-1 while the G-band shifts to 1598 cm-1 relative to GO. Furthermore electrochemical performance evaluated revealing electron transfer rate value 4.88 × 10-9 cms-1 with maximum capacitance about 7182 Fg-1 at a scan rate of 10 mVs-1 respectively. Power density ranges from 3591.18 to 2163 W/kg and energy density from 299 to 120 Wh/Kg as measured from GCD analysis. These findings indicates that novel multinary nanocomposite holds potential as an electrode material in supercapacitors and as a sunlight-driven photocatalyst for the degradation of water-borne organic pollutants.

Chemical and Physical Drivers for Improvement in Permeance and Stability of Linker-Free Graphene Oxide Membranes

Graphene oxide (GO) is a promising membrane material for chemical separations, including water treatment. However, GO has often required postsynthesis chemical modifications, such as linkers or intercalants, to improve either the permeability, performance, or mechanical integrity of GO membranes. In this work, we explore two different feedstocks of GO to investigate chemical and physical differences, where we observe up to a 100× discrepancy in the permeability-mass loading trade-off while maintaining nanofiltration capacity. GO membranes also show structural stability and chemical resilience to harsh pH conditions and bleach treatment. We probe GO and the resulting assembled membranes through a variety of characterization approaches, including a novel scanning-transmission-electron-microscopy-based visualization approach, to connect differences in sheet stacking and oxide functional groups to significant improvements in permeability and chemical stability.

The removal enhancement of organic contaminations and optimization of the photocatalytic efficiency by Box-Behnken design using ZnO-TiO2/porous graphene aerogel

In this study, zinc oxide-titanium dioxide/graphene aerogel (ZnO-TiO2/GA) was successfully synthesized through a simple and cost-effective hydrothermal self-assembly process. Besides, the surface response model and the experimental design according to the Box-Behnken model were selected to determine the optimal removal efficiency for crystal violet (CV) dye and para-nitrophenol (p-NP) phenolic compound. According to the obtained results, the highest degradation efficiency for CV dye of 99.6% was obtained under the following conditions: pH 6.7, CV concentration of 23.0 mg/L, and catalyst dose of 0.30 g/L. For p-NP, the degradation efficiency reached 99.1% under the following conditions: H2O2 volume of 1.25 mL, pH 6.8, and catalyst dose of 0.35 g/L. Therewithal, kinetic models of adsorption-photodegradation, thermodynamic adsorption, and free radical scavenging experiments were also investigated to propose the specific mechanisms involving the removal of CV dye and p-NP. According to the aforementioned results, the study provided a resulting ternary nanocomposite with great removal performance for water pollutants via the synergetic effects of adsorption and photodegradation processes.

Cancer Therapeutic siRNA Delivery and Imaging by Nitrogen- and Neodymium-Doped Graphene Quantum Dots

While small interfering RNA (siRNA) technology has become a powerful tool that can enable cancer-specific gene therapy, its translation to the clinic is still hampered by the inability of the genes alone to cell transfection, poor siRNA stability in blood, and the lack of delivery tracking capabilities. Recently, graphene quantum dots (GQDs) have emerged as a novel platform allowing targeted drug delivery and fluorescence image tracking in visible and near-infrared regions. These capabilities can aid in overcoming primary obstacles to siRNA therapeutics. Here, for the first time, we utilize biocompatible nitrogen- and neodymium-doped graphene quantum dots (NGQDs and Nd-NGQDs, respectively) for the delivery of Kirsten rat sarcoma virus (KRAS) and epidermal growth factor receptor (EGFR) siRNA effective against a variety of cancer types. GQDs loaded with siRNA noncovalently facilitate successful siRNA transfection into HeLa cells, confirmed by confocal fluorescence microscopy at biocompatible GQD concentrations of 375 μg/mL. While the GQD platform provides visible fluorescence tracking, Nd doping enables deeper-tissue near-infrared fluorescence imaging suitable for both in vitro and in vivo applications. The therapeutic efficacy of the GQD/siRNA complex is verified by successful protein knockdown in HeLa cells at nanomolar siEGFR and siKRAS concentrations. A range of GQD/siRNA loading ratios and payloads are tested to ultimately provide substantial inhibition of protein expression down to 31-45%, comparable with conventional Lipofectamine-mediated delivery. This demonstrates the promising potential of GQDs for the nontoxic delivery of siRNA and genes in general, complemented by multiwavelength image tracking.

Synthesis of graphene oxide grafted by diazanyl groups and its application in recovery of lead from lead-acid wastewater

Heavy metal ion (HMI) in wastewater is a kind of resource that is wrongly placed. Recovery of heavy metal from lead-acid wastewater desires efficient and reusable functional materials. In this paper, graphene oxide-like with diazanyl groups (GOLA) was synthesized by a nucleophilic substitution reaction of graphene oxide-like with hydroxyl groups (GOLH) with diazane. GOLA exhibited good stability and recyclability in wastewater. The maximal adsorption capacity (q_max) values of GOLA for Pb(II), Cd(II), Cu(II), Ni(II), and Cr(III) ions were 505.80, 401.99, 83.48, 82.29, and 147.77 mg/g, respectively. The equilibrium time of GOLA adsorbing HMIs was 20 min. GOLA was employed to recover lead ions from lead-acid wastewater to give Pb(OH)₂ and reusable water. Therefore, this paper provides a useful method of recycling lead from lead-acid wastewater.

The one-step synthesis of a novel metal-organic frameworks for efficient and selective removal of Cr(VI) and Pb(II) from wastewater: Kinetics, thermodynamics and adsorption mechanisms

The removal of Cr(VI) and Pb(II) from wastewater is one of the methods to ensure water safety. However, it is still a difficult point to design efficient and selective adsorbent. In this work, Cr(VI) and Pb(II) were removed from water by a new metal-organic frameworks material (MOF-DFSA) with numerous adsorption sites. The max adsorption capacities of MOF-DFSA were 188.12 mg/g for Cr(VI) after 120 min and 349.09 mg/g for Pb(II) within 30 min. MOF-DFSA showed good selectivity and reusability after four cycles. The adsorption of MOF-DFSA was an irreversible process with multi-site coordination, and an active site adsorbed 1.798 Cr (VI) and 0.395 Pb (II). Kinetic fitting showed that the adsorption was chemisorption and surface diffusion was the main limiting step. Thermodynamic showed that Cr(VI) adsorption was enhanced at higher temperatures by spontaneous processes while Pb(II) was weakened. The chelation and electrostatic interaction of the hydroxyl and nitrogen-containing groups of MOF-DFSA with Cr(VI) and Pb(II) is the predominant mechanism, while the reduction of Cr(VI) also play an important role in adsorption. In conclusion, MOF-DFSA was a sorbent that can be used for the removal of Cr(VI) and Pb(II).

A review on recent advancements on removal of harmful metal/metal ions using graphene oxide: Experimental and theoretical approaches

Graphene oxide is a two-dimensional carbon nanomaterial and has gained huge popularity over the last decade. Because, the graphene oxide can be dispersed in water easily and it is one of the most researched two-dimensional materials in the current time. The extraordinary properties shown by graphene oxide (GO) are due to its unique chemical structure; includes various hydrophilic functional groups containing oxygen such as carboxyl, hydroxyl, carbonyl and tiny sp² carbon domains surrounded by sp³ domains. These groups are very peculiar for various applications as they allow covalent functionalisation with a plethora of compounds. Large surface area, intrinsic fluorescence, excellent surface functionality, amphiphilicity, improved conductivity, high adsorption capacity and superior biocompatibility are some of the chemical properties have drawn research from various fields. Graphene oxide has various interactions such as coordination, chelation, hydrogen bonding, electrostatic interaction, hydrophobic effects, π-π interaction, acid base interaction etc., with various metal ions. This review is focused on the removal of metals and metal ions due to their interactions mentioned above. Further, potential of composites of graphene oxide in the removal of metal and metal ions is also discussed. Further, the current challenges in this field at industrial-scale are also discussed.

Selective Ion Transport in Two-Dimensional Lamellar Nanochannel Membranes

Precise and ultrafast ion sieving is highly desirable for many applications in environment-, energy-, and resource-related fields. The development of a permselective lamellar membrane constructed from parallel stacked two-dimensional (2D) nanosheets opened a new avenue for the development of next-generation separation technology because of the unprecedented diversity of the designable interior nanochannels. In this Review, we first discuss the construction of homo- and heterolaminar nanoarchitectures from the starting materials to the emerging preparation strategies. We then explore the property-performance relationships, with a particular emphasis on the effects of physical structural features, chemical properties, and external environment stimuli on ion transport behavior under nanoconfinement. We also present existing and potential applications of 2D membranes in desalination, ion recovery, and energy conversion. Finally, we discuss the challenges and outline research directions in this promising field.

Construction of superhydrophobic graphene-based coating on steel substrate and its ultraviolet durability and corrosion resistance properties

For the first time, a facile and environmentally friendly approach for producing high-quality graphene from the biomass of banana leaves is described in this paper. Two rough coats of Ni-graphene, Ni@G, and Ni-graphene doped with chromium, Ni@Cr-G, were created on steel substrates by electrostatic deposition. These coatings were then submerged in an ethanolic solution of myristic acid, MA, to produce a superhydrophobic, SHP, surface. The Raman spectra demonstrated that the generated graphene was of high quality. Fourier transform infrared spectroscopy findings confirm the modification of the Ni@G coating by MA, Ni@G@MA, and the modification of the Ni@Cr-G composite with MA, Ni@Cr-G@MA. The results of the scanning electron microscope revealed that the created SHP coatings have nanoscale features. The wettability results showed that the water contact angle values for Ni@G@MA and Ni@Cr-G@MA coatings are 158° and 168°, while the water sliding angle values for both coatings are 4.0 ^o and 1.0°, respectively. The atomic force microscopy results show that both Ni@G and Ni@Cr-G coatings increase the roughness of the steel. The chemical and mechanical stability of the Ni@Cr-G@MA coating was higher than those of the Ni@G@MA coating. The coated steel by Ni@Cr-G@MA exhibits UV stability up to 110 h, while the SHP-coated steel by Ni@G@MA exhibits UV stability for 60 h. The potentiodynamic polarization results show that the value of the corrosion current density for bare steel is 13 times that of steel coated with Ni@G@MA, and 21 times that of coated steel with Ni@Cr-G@MA. The electrochemical impedance spectroscopy, EIS, results show that the charge transfer resistance for steel coated with Ni@G@MA is 38 times that of bare steel, while steel coated with Ni@Cr-G@MA is 57 times that of bare steel. Potentiodynamic polarization and EIS results show that the SHP Ni@Cr-G@MA film exhibits higher corrosion resistance than Ni@G@MA film.

Separation Mechanisms and Anti-Fouling Properties of a Microporous Polyvinylidene Fluoride-Polyacrylic Acid-Graphene Oxide (PVDF-PAA-GO) Composite Membrane with Salt and Protein Solutions

This research demonstrates the preparation of composite membranes containing graphene oxide (GO) and investigates the separation mechanisms of various salts and bovine serum albumin (BSA) solutions. A microporous polyvinylidene fluoride-polyacrylic acid-GO (PVDF-PAA-GO) separation layer was fabricated on non-woven support. The GO-incorporating composite resulted in enlarged pore size (0.16 μm) compared with the control membrane (0.12 μm). The zeta potential of the GO composite was reduced to -31 from -19 mV. The resulting membranes with and without GO were examined for water permeability and rejection efficiency with single salt and BSA solutions. Using the non-woven/PVDF-PAA composite, the permeance values were 88-190 kg/m²hMPa, and the salt rejection coefficients were 9-28% for Na₂SO₄, MgCl₂, MgSO₄, and NaCl solutions. These salt removals were based on the Donnan exclusion mechanism considering the ion radii and membrane pore size. Incorporating GO into the separation layer exhibited limited impacts on the filtration of salt solutions, but significantly reduced BSA membrane adhesion and increased permeance. The negatively charged protein reached almost complete removal (98.4%) from the highly negatively charged GO-containing membrane. The GO additive improved the anti-fouling property of the composite membrane and enhanced BSA separation from the salt solution.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

High-Throughput Preparation of Uncontaminated Graphene-Oxide Aqueous Dispersions with Antioxidant Properties by Semi-Automated Diffusion Dialysis

A semi-automated diffusion-dialysis purification procedure is proposed for the preparation of uncontaminated graphene oxide (GO) aqueous dispersions. The purification process is integrated with analytical-signal processing to control the purification degree online by several channels: oxidation-reduction potential, conductivity, and absorbance. This approach reduces the amounts of reagents for chemical treatment during dialysis. The total transition metal (Mn and Ti) content was reduced to a sub-ppb level (assessed by slurry nebulization in inductively coupled plasma optical atomic emission spectroscopy). Purified aqueous GO samples possess good stability for about a year with a zeta-potential of ca. -40 mV and a lateral size of ca. sub-µm. Purified GO samples showed increased antioxidant properties (up to five times compared to initial samples according to chemiluminometry by superoxide-radical (O₂^-) generated in situ from xanthine and xanthine oxidase with the lucigenin probe) and significantly decreased peroxidase-like activity (assessed by the H₂O₂-L-012 system).

Eco-friendly method for construction of superhydrophobic graphene-based coating on copper substrate and its corrosion resistance performance

In this work, Ni and Ni-graphene, Ni-G, films were electrodeposited on copper substrate by potentiostatic deposition. To achieve superhydrophobicity, myristic acid, MA, was used to modify the surface of the electrodeposited coatings. The manufactured Ni film modified with myristic acid, Ni-MA, and the Ni-G film modified with myristic acid, Ni-G-MA, show excellent superhydrophobic, SHP, properties with a water contact angle of 159° and 162°, respectively. The surface morphology of the prepared SHP films was investigated using a Scanning Electron Microscope, and the results revealed micro-nano structures in both Ni-MA and Ni-G-MA films. The Fourier Transform Infrared Spectrophotometer data showed that the Ni-MA and Ni-G-MA films were successfully grafted on the copper metal. The Ni-G-MA film possessed higher chemical stability and mechanical abrasion resistance than Ni-MA. The Ni-MA and Ni-G-MA films exhibit long-term durability in the outdoor environment for more than four months. The potentiodynamic polarization and electrochemical impedance spectroscopy results demonstrated that the SHP films on the copper substrate exhibit remarkable corrosion resistance in 0.5 M NaCl.

Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration

Graphene oxide (GO), a carbonaceous 2D nanomaterial, has received significant interest as a next-generation membrane building block. To fabricate high-performance membranes, an effective strategy involves stacking GO nanosheets in laminated structures, thereby creating unique nanochannel galleries. One outstanding merit of laminar GO membranes is that their permselectivity is readily tunable by tailoring the size of the nanochannels. Here, a high-performance GO-based nanofiltration membrane was developed by intercalating an aromatic crosslinker, α,α/-dichloro-p-xylene (DCX), between the layers in laminated GO nanosheets. Owing to the formation of strong covalent bonds between the crosslinker and the GO, the resulting GO laminate membrane exhibited outstanding structural stability. Furthermore, due to the precisely controlled and enlarged interlayer spacing distance of the developed DCX-intercalated GO membrane, it achieved an over two-fold enhancement in water permeability (11 ± 2 LMH bar^-1) without sacrificing the rejection performance for divalent ions, contrary to the case with a pristine GO membrane.

Novel GO/Fe-Mn hybrid for the adsorptive removal of Pb(II) ions from aqueous solution and the spent adsorbent disposability in cement mix: compressive properties and leachability study for circular economy benefits

GO/Fe-Mn hybrids were prepared by a single-pot chemical precipitation method and were characterized using FTIR, XRD, Raman, zeta potential, and FESEM, which confirmed the impregnation of Fe/Mn onto GO sheets. The synthesized hybrids were successively applied in removing the Pb(II) ions from aqueous solution and later utilizing the spent adsorbent to increase the properties of cement. The adsorption capability of the synthesized hybrid was seen in a set of batch studies to find out that about 15 min of contact time was required to remove 99% of the contaminant at a pH of 5 ± 0.2 and a dose of 0.83 g/L. The mechanism of the adsorption process for the synthesized hybrid was well described by Elovich kinetic model with an R² of 0.99 and Langmuir isotherm model, also with an R² of 0.99. The desorption studies conducted using 0.1 M HCl solution showed significant stability of the hybrid with a drop of 12% in the removal efficiency of Pb after up to five adsorption-desorption cycles. This points to an efficient adsorbent having potential for economical use. Later, the spent adsorbent was mixed with cement at ratios of 0.05%, 0.1%, and 0.5%, and compressive strength tests were performed, which showed an increase in the strength by 7.62%, 16.11%, and 26.82% at 28 days of curing time. The TCLP and SPLP tests performed on the hybrid and cement-spent adsorbent mix showed all the leaching parameters were well within the permissible limits. This development shows the potential for the use of spent adsorbent in a circular economy model.

Tuning liquid aggregation of zwitterionic chitin nanocrystals by graphene oxide planar catchers via electrostatic regulation

As important structural units, biomass nanomaterials have exhibited great potentials to construct high-performance macroscopic materials for broad applications by liquid assembly. However, the liquid aggregation of nanomaterials was less investigated. Here, we demonstrate that the one-dimensional (1D) zwitterionic chitin nanocrystals (ZChNCs) can be reversibly captured and released by two-dimensional (2D) planar catchers of graphene oxide (GO) sheets. The dominant electrostatic regulation strategy by pH variation drives that there are three reversible changes for the liquid aggregation of ZChNCs and GO, which were the isolated dispersion state (pH > 7), homogeneous hybridization state (7 ≥ pH ≥ 5), and partially stacked hybridization state (pH < 5), respectively. We found there are no sedimentation during the change of liquid aggregation with the higher absolute Zeta potentials (almost>30 mV). Moreover, the ZChNCs-GO nanohybrids have reached a maximum Zeta potential up to -80 mV, which can be explained by the ionization of excess carboxyl groups on the surface of ZChNCs. Besides, the electrostatic regulation endows the nanohybrids with rheological behavior, which is beneficial to the macro assembly of liquid nanomaterials. This work provides a new class of hybrid colloidal nanomaterials, opens the structural design dimension of macro assembly and holds great potentials in high-performance biodegradable material.

Photocatalytic degradation of cefixime using visible light-driven Z-scheme ZnO nanorod/Zn2TiO4/GO heterostructure

ZnO nanorod along with a Zn₂TiO₄/GO heterostructure with enhanced charge transfer capability was synthesized by a facile sol-gel method. FT-IR, XRD, XPS, TEM, SEM, EDX, UV-Vis DRS, photocurrent response and PL analyses were applied to characterize the as-prepared photocatalysts. To investigate the photocatalytic activity of the composite, Cefixime (CEF) removal under visible light was evaluated. The ZnO nanorod/Zn₂TiO₄/GO, including 65 wt% ZnO and 3 wt% graphene oxide, showed the highest CEF degradation and was selected as the optimal ternary composite. Reduction of electron-hole pair recombination rate, successful interfacial charge transfers, and more visible light reception in the Z-scheme system were the important reasons for improving the photocatalytic properties of ZnO nanorod/Zn₂TiO₄/GO. Effective operating parameters in the CEF photocatalytic removal process were optimized employing the response surface method and were as follows: photocatalyst dosage = 0.88 g/L, pH = 5, radiation time = 115 min, and CEF concentration = 10 ppm. The photocatalytic degradation% of CEF and total organic carbon (TOC) removal% under the optimal conditions were 71.4 and 57.5%, respectively, for the three-component composite indicating the production of intermediate species during the process. This photocatalytic reaction confirmed the first-order kinetic and using the ZnO nanorod/Zn₂TiO₄/GO composite was able to improve the reaction rate by about 2.7 and 6.2 times more than ZnO nanorod/Zn₂TiO₄ and ZnO, respectively. The effects of radiation intensity and temperature were investigated and 175 W/m² and 35 °C were obtained as optimum values. Eventually, according to the trapping test, h⁺, superoxide radical, and hydroxyl radical are the most effective active species in this photocatalytic reaction, respectively.

An improved surface enhanced Raman spectroscopic method using a paper-based grape skin-gold nanoparticles/graphene oxide substrate for detection of rhodamine 6G in water and food

Organic toxins are persistent chemicals of global concern capable of accumulating in environment and food. Surface enhanced Raman spectroscopy (SERS) is a promising technique that facilitates onsite detection of organic toxins. However, the fabrication of a SERS substrate is complicated and difficult to provide flexibility, fastness and cost-effectiveness. This study aims to develop a paper-based SERS method using grape skin-gold nanoparticles/graphene oxide (GE-AuNPs/GO) as SERS substrate and evaluate its efficiency with rhodamine 6G (Rh6G) as a model organic toxin and a real water and food contaminant. GE-AuNPs synthesized by green method using grape skin waste extract and GE-AuNPs/GO showed a surface plasmon resonance at 536 and 539 nm, particle size 18.6 and 19.5 nm, and zeta potential -44.6 and -59.7 mV, respectively. Paper-based SERS substrates were prepared by coating a hydrophobic thin-film of 30% polydimethylsiloxane solution in hexane on Whatman no. 1 filter paper, followed by drop-casting GE-AuNPs or GE-AuNPs/GO and drying. The SERS signals of Rh6G showed an enhancement factor of 5.8 × 104 for GE-AuNPs and 1.92 × 109 for GE-AuNPs/GO, implying that a combination of electromagnetic surface plasmon, charge transfer and molecular resonances may be responsible for a higher enhancement of signal by the latter. A low detection limit of 7.33 × 10-11 M in the linear range of 10-11-10-5 M was obtained for GE-AuNPs/GO, while the relative standard deviation of repeatability and reproducibility was 9.6 and 12.6%, respectively. Paper-based GE-AuNPs/GO SERS substrate was highly stable as <20% loss in efficiency was shown over a 60-day storage period. Application to real samples showed a high recovery of Rh6G from tap water (93.9-100.8%) as well as food samples such as red chilli powder (91.0-95.4%), red glutinous rice ball (96.6-98.3%) and tomato ketchup (98.9-102.3%) after QuEChERS extraction. Collectively, the developed paper-based GE-AuNPs/GO can be a potential substrate for sensitive onsite detection of rhodamine 6G by SERS method.

Physical Adsorption of Graphene Oxide onto Polymer Latexes and Characterization of the Resulting Nanocomposite Particles

Polymer/graphene oxide (GO) nanocomposite particles were prepared via heteroflocculation between 140-220 nm cationic latex nanoparticles and anionic GO nanosheets in either acidic or basic conditions. It is demonstrated that nanocomposite particles can be formed using either poly(2-vinylpyridine)-b-poly(benzyl methacrylate) (P2VP-PBzMA) block copolymer nanoparticles prepared by reversible-addition chain-transfer (RAFT)-mediated polymerization-induced self-assembly (PISA), or poly(ethylene glycol)methacrylate (PEGMA)-stabilized P2VP latexes prepared by traditional emulsion polymerization. These two latexes are different morphologically as the P2VP-PBzMA block copolymer latexes have P2VP steric stabilizer chains in their corona, whereas the PEGMA-stabilized P2VP particles have a P2VP core and a nonionic steric stabilizer. Nevertheless, both the P2VP-PBzMA and PEGMA-stabilized P2VP latexes are cationic at low pH. Thus, the addition of GO to these latexes causes flocculation to occur immediately due to the opposite charges between the anionic GO nanosheets and cationic latexes. Control heteroflocculation experiments were conducted using anionic sterically stabilized poly(potassium 3-sulfopropyl methacrylate)-b-poly(benzyl methacrylate) (PKSPMA-PBzMA) and nonionic poly(benzyl methacrylate) (PBzMA) nanoparticles to demonstrate that polymer/GO nanocomposite particles were not formed. The degree of flocculation and the strength of electrostatic interaction between the cationic polymer latexes and GO were assessed using disc centrifuge photosedimentometry (DCP), transmission electron microscopy (TEM), and UV-visible spectrophotometry. These studies suggest that the optimal conditions for the formation of polymer/GO nanocomposite particles were GO contents between 10% and 20% w/w relative to latex, with the latexes containing P2VP in their corona having a stronger electrostatic attraction to the GO sheets.

Fabrication of eco-friendly graphene-based superhydrophobic coating on steel substrate and its corrosion resistance, chemical and mechanical stability

Superhydrophobic coatings were successfully fabricated on steel substrates using potentiostatic electrodeposition of Ni and Ni-graphene, Ni-G, coatings followed by immersion in an ethanolic solution of stearic acid, SA. Rice straw, an environmentally friendly biomass resource, was used to synthesize high-quality graphene. The Raman spectra proved the high quality of the produced graphene. The Fourier transform infrared spectroscopy, FTIR, results showed that the Ni coating grafted with stearic acid, Ni-SA, and the Ni-G composite grafted with stearic acid, Ni-G-SA, were successfully deposited on the steel substrate. The scanning electron microscope, SEM, results showed that the prepared superhydrophobic coatings exhibit micro-nano structures. The wettability results revealed that the values of contact angles, CAs, for Ni-SA and Ni-G-SA coatings are 155.7° and 161.4°, while the values of sliding angles, SAs, for both coatings are 4.0° and 1.0°, respectively. The corrosion resistance, chemical stability, and mechanical abrasion resistance of the Ni-G-SA coating were found to be greater than those of the Ni-SA coating.

Graphene-Based Functional Hybrid Membranes for Antimicrobial Applications: A Review

Graphene-based nanomaterials have shown wide applications in antimicrobial fields due to their accelerated rate of pathogen resistance and good antimicrobial properties. To apply graphene materials in the antimicrobial test, the graphene materials are usually fabricated as two-dimensional (2D) membranes. In addition, to improve the antimicrobial efficiency, graphene membranes are modified with various functional nanomaterials, such as nanoparticles, biomolecules, polymers, etc. In this review, we present recent advances in the fabrication, functional tailoring, and antimicrobial applications of graphene-based membranes. To implement this goal, we first introduce the synthesis of graphene materials and then the fabrication of 2D graphene-based membranes with potential techniques such as chemical vapor deposition, vacuum filtration, spin-coating, casting, and layer-by-layer self-assembly. Then, we present the functional tailoring of graphene membranes by adding metal and metal oxide nanoparticles, polymers, biopolymers, metal–organic frameworks, etc., with graphene. Finally, we focus on the antimicrobial mechanisms of graphene membranes, and demonstrate typical studies on the use of graphene membranes for antibacterial, antiviral, and antifungal applications. It is expected that this work will help readers to understand the antimicrobial mechanism of various graphene-based membranes and, further, to inspire the design and fabrication of functional graphene membranes/films for biomedical applications.

Enhancing the Dye-Rejection Efficiencies and Stability of Graphene Oxide-Based Nanofiltration Membranes via Divalent Cation Intercalation and Mild Reduction

Laminar graphene oxide (GO) membranes have demonstrated great potential as next-generation water-treatment membranes because of their outstanding performance and physicochemical properties. However, solute rejection and stability deterioration in aqueous solutions, which are caused by enlarged nanochannels due to hydration and swelling, are regarded as serious issues in the use of GO membranes. In this study, we attempt to use the crosslinking of divalent cations to improve resistance against swelling in partially reduced GO membranes. The partially reduced GO membranes intercalated by divalent cations (i.e., Mg2+) exhibited improved dye-rejection efficiencies of up to 98.40%, 98.88%, and 86.41% for methyl orange, methylene blue, and rhodamine B, respectively. In addition, it was confirmed that divalent cation crosslinking and partial reduction could strengthen mechanical stability during testing under harsh aqueous conditions (i.e., strong sonication).

Insights into the enhanced flux of graphene oxide composite membrane in direct contact membrane distillation: The different role at evaporation and condensation interfaces

Graphene oxide (GO) coating has recently been reported as a novel approach to increase membrane flux of membrane distillation (MD), yet the phenomena underlying the process are still not fully understood. In this study, a mathematical model based on capillary-film assumption was developed and validated with the results (R²>0.99) from a series of MD experiments. According to the model, when GO layer was placed at the evaporation interface, the temperature difference across the membrane surface increases significantly (44.2%∼92.0%) and the temperature polarization coefficient is increased greatly from 0.29∼0.38 to around 0.55. This leads to a big increase of driving force for higher heat flow and subsequently mass flux (17.8∼45.5%). However, the vapor pressure on membrane surface was decreased due to Kelvin effect of GO capillary pores, which has a negative influence on the driving force, accounting for about 26.9% to 52.6% drop in the achieved flux. In comparison, when GO layer was placed at the condensation interface, the temperature difference across the membrane surface decreases slightly (7.2∼12.2%), but the reduced vapor pressure on GO capillary pores due to Kelvin effect become the dominant factor affecting membrane flux, resulting in an increase mass flux of 12.4∼16.4%. The model developed in this study provides a theoretical foundation for understanding the role of GO coating on flux improvement, and can be used for further development of high flux membranes.

Synthesis and application of graphene oxide as a nanoadsorbent to remove Cd (II) and Pb (II) from water: adsorption equilibrium, kinetics, and regeneration

In this work, graphene oxide (GO) was synthesized by the modified Hummers method. The nanomaterial was characterized by FTIR and Raman spectroscopy, SEM, and pH at the point of zero charge. GO exhibited typical characteristics of graphene-based materials, indicating that graphite oxidation and exfoliation occurred successfully. Cd (II) and Pb (II) adsorption onto GO was carried out in batch systems, in which the effect of adsorbent dosage, contact time, and initial adsorbate concentration were evaluated. Langmuir, Freundlich, and Sips isotherm models, as well as pseudo order models and Elovich kinetic equation were applied to adsorption experimental data. Results indicated that increasing adsorbent mass, the removal efficiency of Cd (II) and Pb (II) increased. Freundlich isotherm better described Pb (II) adsorption (R² = 0.96), while Cd (II) isotherm showed linear behavior. From the Akaike's AIC parameter, kinetic data were satisfactorily described by pseudo-first order (Cd (II)) and pseudo-n order (Pb (II)) models. GO was successfully subjected to five regeneration cycles, maintaining high efficiency (> 90%) in all cycles. GO showed high potential for the adsorption of Cd (II) and Pb (II) from aqueous solution, due to its high adsorption capacity, rapid Cd (II) and Pb (II) intakes, and great regeneration performance.

Graphene Oxide as a Collagen Modifier of Amniotic Membrane and Burnt Skin

Introduction

The aim of this interdisciplinary study was to answer the question of whether active antioxidants as graphene oxide (GO), sodium ascorbate, and L-ascorbic acid modify at a molecular and supramolecular level the tissue of pathological amnion and the necrotic eschar degraded in thermal burn. We propose new solutions of modifiers based on GO that will become innovative ingredients to be used in transplants (amnion) and enhance regeneration of epidermis degraded in thermal burn.

Methods

A Nicolet 6700 spectrophotometer with Omnic software and the EasiDiff diffusion accessory were used in FTIR spectroscopic analysis. A Nicolet Magna-IR 860 spectrometer with an FT Raman accessory was used to record the Raman spectra of the samples. The surface of the samples was examined using a Phenom ProX scanning electron microscope with an energy-dispersive X-ray spectroscopy detector to diagnose and illustrate morphological effects on skin and amnion samples. SAXS measurements were carried out with a compact Kratky camera equipped with the SWAXS optical system.

Results

Characterisation of amide I-III regions, important for molecular structure, on both FTIR and FTR spectra revealed distinct shifts, testifying to organization of protein structure after GO modification. A wide lipid band associated with ester-group vibrations in phospholipids of cell membranes and vibrations of the carbonyl group of GO in the 1,790-1,720 cm^-1 band were observed in the spectra of thermally degraded and GO-modified epidermis and pathological amnion. SAXS studies revealed that GO caused a significant change in the structure of the burnt skin, but its influence on the structure of the amnion was weak.

Conclusion

Modification of burn-damaged epidermis and pathological amnion by means of GO results in stabilization and regeneration of tissue at the level of molecular (FTIR, FTR) and supramolecular (SAXS) interactions.

Recent advances in polymeric nanostructured ion selective membranes for biomedical applications

Nano structured ion-selective membranes (ISMs) are very attractive materials for a wide range of sensing and ion separation applications. The present review focuses on the design principles of various ISMs; nanostructured and ionophore/ion acceptor doped ISMs, and their use in biomedical engineering. Applications of ISMs in the biomedical field have been well-known for more than half a century in potentiometric analysis of biological fluids and pharmaceutical products. However, the emergence of nanotechnology and sophisticated sensing methods assisted in miniaturising ion-selective electrodes to needle-like sensors that can be designed in the form of implantable or wearable devices (smartwatch, tattoo, sweatband, fabric patch) for health monitoring. This article provides a critical review of recent advances in miniaturization, sensing and construction of new devices over last decade (2011-2021). The designing of tunable ISM with biomimetic artificial ion channels offered intensive opportunities and innovative clinical analysis applications, including precise biosensing, controlled drug delivery and early disease diagnosis. This paper will also address the future perspective on potential applications and challenges in the widespread use of ISM for clinical use. Finally, this review details some recommendations and future directions to improve the accuracy and robustness of ISMs for biomedical applications.

Graphene Family Nanomaterials (GFN)-TiO2 for the Photocatalytic Removal of Water and Air Pollutants: Synthesis, Characterization, and Applications

Given the industrial revolutions and resource scarcity, the development of green technologies which aims to conserve resources and reduce the negative impacts of technology on the environment has become a critical issue of concern. One example is heterogeneous photocatalytic degradation. Titanium dioxide (TiO2) has been intensively researched given its low toxicity and photocatalytic effects under ultraviolet (UV) light irradiation. The advantages conferred by the physical and electrochemical properties of graphene family nanomaterials (GFN) have contributed to the combination of GFN and TiO2 as well as the current variety of GFN-TiO2 catalysts that have exhibited improved characteristics such as greater electron transfer and narrower bandgaps for more potential applications, including those under visible light irradiation. In this review, points of view on the intrinsic properties of TiO2, GFNs (pristine graphene, graphene oxide (GO), reduced GO, and graphene quantum dots (GQDs)), and GFN-TiO2 are presented. This review also explains practical synthesis techniques along with perspective characteristics of these TiO2- and/or graphene-based materials. The enhancement of the photocatalytic activity by using GFN-TiO2 and its improved photocatalytic reactions for the treatment of organic, inorganic, and biological pollutants in water and air phases are reported. It is expected that this review can provide insights into the key to optimizing the photocatalytic activity of GFN-TiO2 and possible directions for future development in these fields.

A Facile and Scalable Method of Fabrication of Large-Area Ultrathin Graphene Oxide Nanofiltration Membrane

With their ultrafast water transport and excellent molecule sieving properties, graphene oxide (GO)-based membranes show great potential in the membrane filtration field for water purification and molecular separation. However, the inability of uniform GO membranes to be produced on an industrial scale and their nonenvironmentally friendly reduction treatment are the bottleneck preventing their industrial applications. Herein, we report a scalable ultrathin uniform GO membrane fabrication technique. Ultrathin GO membranes with a large area of 30 × 80 cm² and a thickness of a few nanometers were uniformly and facilely fabricated using a continuous process combining Mayer rod-coating and a short-time, high-power UV reduction. The interlayer spacing of the GO membrane could be effectively reduced and regulated to improve the salt rejection rate. The fabricated membrane showed superior water permeability of over 60.0 kg m^-2 h^-1 and a high separation efficiency of over 96.0% for a sodium sulfate (Na₂SO₄) solution. It also exhibited excellent mechanical stability under various harsh crossflow conditions. More importantly, the fabrication method developed here can be scaled up using a roll-to-roll industrial production process, which successfully solves the problem currently faced by GO membrane researchers and makes the industrial usage of GO membrane a reality.