Magnetic solid-phase extraction and pre-concentration of 17β-estradiol and 17α-ethinylestradiol in tap water using maghemite-graphene oxide nanoparticles and determination via HPLC with a fluorescence detector

Magnetic COF on MOF heterojunction assisted surface-enhanced Raman spectroscopy for 17β-estradiol analysis

17β-estradiol (E2) is a crucial estrogen that significantly influences reproductive biological processes and the development of associated diseases, highlighting the need for effective detection methods. Here, we propose a magnetic hierarchical porous material (Mag MOF@COF-Apt) through the in situ growth of a TAPB-DMTP-COF layer on a magnetic Fe-MOF core for the selective recognition and surface-enhanced Raman scattering (SERS) analysis of E2. The Mag MOF@COF-Apt features the inherent SERS-enhancing properties of Mag MOFs. Furthermore, the COF layer establishes a gap between E2 and the Mag MOF, enhancing SERS activity through the on-shell-isolated effect. Additionally, the topological structure of the COF on the MOF provides a high surface area platform for more affinity sites, and its expanded porous structure facilitates size-exclusion of interferents. Finally, E2 aptamer functionalization equips this heterojunction with the capability for the selective capture of E2. Through these multiple synergistic effects, the Mag MOF@COF-Apt assisted E2 profiling features good sensitivity (detection limit of 110.14 nmol L-1), strong tolerance to protein (40 mg mL-1 BSA, 40 mg mL-1 HSA) and salt (40 mg mL-1 NaCl) interference, high signal reproducibility (RSD = 7.29 %) and reusability over four cycles. The effectiveness of Mag MOF@COF-Apt based profiling was validated by successful E2 detection in human serum. This work is anticipated to advance MOF/COF hybrid substrates for SERS, providing an effective tool for E2 analysis.

A new approach for the determination of As, Cu, and Pb in seawater samples using manganese oxide octahedral molecular sieve as a sorbent for dispersive solid-phase microextraction

This study introduces a novel method for preconcentrating As, Cu, and Pb from seawater samples using manganese oxide octahedral molecular sieve (OMS-2), as a sorbent, and the analysis by Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). The OMS-2 nanomaterial was synthesized and characterized using X-ray diffraction and scanning electron microscopy, revealing a crystallite size of 20.9 nm and a typical needle-like morphology of cryptomelane structure. To optimize the ICP-OES operating conditions and the preconcentration process, a central composite design was used. The optimal conditions for ICP-OES analyses were 1200 W and 0.7 L min-1 for the levels of the radio frequency potential (RF) and nebulization gas flow rate, respectively. The optimal conditions for the adsorption process were achieved at a pH of 6.5, 30 mg of OMS-2, and 35 min of stirring time, in the presence of the sample matrix. The enrichment factors obtained were 66, 45, and 21, and a limit of detection of 0.3, 0.1, and 2.1 μg L-1 for As, Cu, and Pb, respectively. The recovery tests ranged from 80 % to 120 %. The method was successfully applied to determine As, Cu, and Pb in seawater samples.

17β-Estradiol-Loaded Exosomes for Targeted Drug Delivery in Osteoporosis: A Comparative Study of Two Loading Methods

Purpose

Exosomes are natural nanoparticles that participate in intercellular communication through molecular transport. Recently, due to their membrane vesicular structure and surface proteins, exosomes have been used extensively in the research field of drug delivery. Osteoporosis is an inflammation in which the cellular balance of bone tissue is disturbed that reduces bone density and making bone prone to abnormal fractures with small amount of force. Utilizing estrogen is one of the main therapeutic strategies for osteoporosis. Despite the positive effects of estrogen on bone tissue, changes in the natural estrogen levels of the body can cause a number of diseases such as different types of cancer. Therefore, designing a therapeutic system which controls more accurate tissue targeting of estrogen seems to be a rational and promising practical approach.

Methods

In this study, bone marrow mesenchymal stem cells (BMMSCs)-derived exosomes were loaded by estradiol using two different methods of drug loading, namely incubation and sonication methods and then the survival effects of the drug loaded exosomes on BMMSCs was investigated.

Results

Examination of size, shape, and surface factors of exosomes in different states (pure exosomes and drug-loaded exosomes) showed that the round morphology of exosomes was preserved in all conditions. However, the particles size increased significantly when loaded by sonication method. The increased survival of BMMSCs was noted with estradiol-loaded exosomes when compared to the control group.

Conclusion

The results suggest that estradiol-loaded exosomes have potential to be used as nano-drug carriers in the treatment of osteoporosis.

Adsorption of chloroquine, propranolol, and metformin in aqueous solutions using magnetic graphene oxide nanocomposite

The work proposes the application of a nanocomposite formed by graphene oxide and magnetite to remove chloroquine, propranolol, and metformin from water. Tests related to adsorption kinetics, equilibrium isotherms and adsorbent reuse were studied, and optimization parameters related to the initial pH of the solution and the adsorbent dosage were defined. For all pharmaceuticals, adsorption tests indicated that removal efficiency was independent of initial pH at adsorbent dosages of 0.4 g L-1 for chloroquine, 1.2 g L-1 for propranolol, and 1.6 g L-1 for metformin. Adsorption equilibrium was reached within the first few minutes, and the pseudo-second-order model represented the experimental data well. While the equilibrium data fit the Sips isotherm model at 298 K, the predicted maximum adsorption capacities for chloroquine, propranolol, and metformin were 44.01, 16.82, and 12.23 mg g-1, respectively. The magnetic nanocomposite can be reused for three consecutive cycles of adsorption-desorption for all pharmaceuticals, being a promising alternative for the removal of different classes of pharmaceuticals in water.

From polyethylene waste bottles to UIO-66 (Zr) for preconcentration of steroid hormones from river water

Metal-organic framework (UiO-66 (Zr) was synthesized using polyethylene terephthalate (PET) and used as an adsorbent for extraction and preconcentration of steroid hormones in river water. Polyethylene waste bottles were used as the source of polyethylene terephthalate (PET) ligands. The UIO-66(Zr), which the PET was made from recycled waste plastics, was used for the first time for the extraction and preconcentration of four different types of steroid hormones in river water samples. Various analytical characterization techniques were employed to characterize the synthesized material. The steroid hormones were detected and quantified using high-performance liquid chromatography coupled with diode array detector (HPLC-DAD). The results were further validated using ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Experimental variables, such as sample pH, the mass of adsorbent and extraction time, were optimized using Box-Behnken design (BBD). The dispersive solid phase extraction method combined with HPLC-DAD, displayed good linearity (0.004-1000 µg/L) low limits of detections (LODs, 1.1-16 ng/L for ultrapure water and 2.6-5.3 ng/L for river water) and limits of quantification (LOQs, 3.7-5.3 ng/L for ultrapure water and 8.7-11.0 ng/L for river water samples) and acceptable extraction recoveries (86-101%). The intraday (n = 10) and interday (n = 5) precisions expressed in terms of relative standard deviations (%RSD) were all less than 5%. The steroid hormones were detected in most of the river water samples (Vaal River and Rietspruit River). The DSPE/HPLC method offered a promising approach for simultaneous extraction, preconcentration and determination of steroid hormones in water.

Preparation of Graphene Oxide-Maghemite-Chitosan Composites for the Adsorption of Europium Ions from Aqueous Solutions

The adsorption of Eu(III) on composites synthesised from graphene oxide (GO), maghemite (MGH), and chitosan (CS) has been studied using different approaches. The physicochemical and morphological characteristics of the composites GO-MGH, GO-CS, GO-MGH-CS I, II, and III were determined by XRD, Mössbauer spectroscopy, FTIR, Raman spectroscopy, and TEM. According to the results of batch experiments, the maximum experimental adsorption capacity was 52, 54, 25, 103, and 102 mg/g for GO-MGH, GO-CS, GO-MGH-CS I, II, and III, respectively. The data obtained are in better agreement with the Langmuir, pseudo-second-order, and pseudo-first-order models only for GO-MGH. Thus, the adsorption of Eu(III) on the composites was a favourable, monolayer, and occurred at homogeneous sites. The nature of adsorption is chemical and, in the case of GO-MGH, physical. Tests of the composites in natural waters showed a high removal efficiency for Eu(III), Pu(IV), and Am(III), ranging from 74 to 100%. The ANFIS model has quite good predictive ability, as shown by the values for R², MSE, SSE, and ARE. The GO-MGH-CS composites with the high adsorption capacity could be promising candidates for the removal of Eu(III) and the pre-concentration of Pu(IV) and Am(III) from natural waters.

High Performance Liquid Chromatography (HPLC) with Fluorescence Detection for Quantification of Steroids in Clinical, Pharmaceutical, and Environmental Samples: A Review

Steroids are compounds widely available in nature and synthesized for therapeutic and medical purposes. Although several analytical techniques are available for the quantification of steroids, their analysis is challenging due to their low levels and complex matrices of the samples. The efficiency and quick separation of the HPLC combined with the sensitivity, selectivity, simplicity, and cost-efficiency of fluorescence, make HPLC coupled to fluorescence detection (HPLC-FLD) an ideal tool for routine measurement and detection of steroids. In this review, we covered HPLC-FLD methods reported in the literature for the steroids quantification in clinical, pharmaceutical, and environmental applications, focusing on the various approaches of fluorescent derivatization. The aspects related to analytical methodology including sample preparation, derivatization reagents, and chromatographic conditions will be discussed.

Removal mechanism of 17β-estradiol by carbonized green synthesis of Fe/Ni nanoparticles

Even a small concentration of estrogen released into the environment can cause great damage to the surrounding ecosystem, with potential teratogenic and carcinogenic hazards to many organisms. In this study, carbonized green synthesized Fe/Ni NPs, with a maximum adsorption capacity of 44.32 mg g^-1 coupled with over 98.3% removal efficiency, were used to remove 17β-estradiol (E2) from water. Adsorption best conformed to pseudo-second-order kinetics (R² = 0.998-0.999) and the Freundlich model (R² = 0.990-0.997). SEM images reveal that the carbonized material had increased specific surface area and pores. Zeta Potential, FTIR and XPS spectra confirmed that carbonized material was negatively charged and contained functional groups with a high affinity for E2. Liquid chromatography during removal of E2 suggested no new substances were generated. Therefore, the synergistic effect of carbonized-Fe/Ni NPs surface functional groups is a key issue, including dehydration bonds, hydrogen bonds, and the accumulation of Π and Π. In practice the application of carbonized-Fe/Ni NPs demonstrated their ability to remove 51.8% and 48.7% of E2 from domestic sewage and livestock wastewater, respectively. This work provides a strong basis for the practical removal of E2 using carbonized-Fe/Ni NPs material.

Assessment of automated off-line solid-phase extraction LC-MS/MS to monitor EPA priority endocrine disruptors in tap water, surface water, and wastewater

EPA method 539.1 recently introduced an expanded list of priority endocrine-disrupting compounds (EDCs), some of which were also included in the Unregulated Contaminant Monitoring Rule 3 (UCMR3). Though standardized methods are available for drinking water, analysis of steroid hormones and bisphenol A (BPA) at the ultra-trace level remains challenging. This study set out to evaluate the suitability of automated off-line solid-phase extraction (SPE) liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) for the determination of EPA-priority EDCs in environmental water matrixes (tap water, surface water, and wastewater influents and effluents). The target molecules included 14 steroid hormones (altrenogest, androstenedione, equilenin, equilin, α-estradiol, β-estradiol, estriol, estrone, ethinylestradiol, levonorgestrel, medroxyprogesterone, norethindrone, progesterone, testosterone) and BPA. Factors that may influence the analytical performance were assessed. This involved, for instance, testing combinations of SPE materials from different brands and protocol variations. Several materials presented absolute extraction efficiencies in acceptable ranges. Initial sample pH, nature of reconstitution medium, and mobile phase salt concentration were among the potential factors affecting analyte signal. Storage conditions (different preservative agents) possibly exerted the strongest influence, in agreement with the literature. Limits of detection were in the range of 0.03-0.5 ng/L in drinking water, 0.1-0.5 ng/L in surface water, and 0.16-1 ng/L in wastewater. Method validation also involved testing linearity, accuracy, and precision in reagent water and matrix-matched extracted calibrants. The method was applied to field-collected water samples in Eastern Canada. Summed EDC concentrations remained low in tap water (<LOQ-0.92 ng/L), while higher detection frequencies and contamination levels were reported in riverine surface waters (2.6-37 ng/L) and municipal wastewaters (10-424 ng/L).

Preparation, characterization and application of double yolk–shell structure magnetic molecularly imprinted polymers for extraction of 17β-estradiol

Novel double yolk–shell structure molecularly imprinted polymers were synthesized by surface polymerization with 17β-estradiol as the template, followed by chemical etching.

Deep eutectic solvent-modified mixed iron hydroxide-silica: Application in magnetic solid-phase extraction for enrichment of organochlorine pesticides prior to GC-MS analysis

A new type of magnetic material based on silica-coated mixed iron hydroxides functionalized with deep eutectic solvent was utilized for the magnetic solid-phase extraction of organochlorine pesticides prior to gas chromatography-mass spectrometry analysis. Choline chloride and phenol were selected as the hydrogen bond acceptor and donor, respectively, for preparing the deep eutectic solvent-modified magnetic surface. The modified surface possessed superior enrichment capability for organochlorine pesticides. Under optimal extraction conditions, viz., 10 mg sorbent, 5 mL sample solution, and 200 μL acetone (desorption solvent), linearity was obtained in the range 0.005-200 μg/L, with coefficients of determination greater than 0.997. The limits of detection and quantification were as low as 0.6-10 and 5-60 ng/L, respectively, whereas the enrichment factors were in the range of 31-100. The precisions evaluated in terms of the relative standard deviations of the intra- and inter-day experiments were <4.9 and 7.6%, respectively. The developed method was successfully applied for determining the organochlorine residues in agricultural products. Satisfactory recoveries in the range of 71.2-110.3% were obtained, with a relative standard deviation of <8.0%. The proposed material is a promising sorbent for the preconcentration of organochlorine residues.

Amino-based magneto-polymeric-modified mixed iron hydroxides for magnetic solid phase extraction of phenol residues in environmental samples

Mixed iron hydroxides (MIHs) modified with different amino-based polymeric materials, including aminopropyltriethoxysilane, polydopamine, diaminobenzoic acid, polyaniline, and polyphenylenediamine, were comparatively investigated as sorbents for the extraction of phenol compounds. Polyphenylenediamine-modified mixed iron hydroxides (MIH@PPDA) showed high adsorption capability for most target analytes. Its ferromagnetic behavior, with a magnetization of 17.38 emu g^-1, was sufficient for subsequent use in magnetic solid-phase extraction (MSPE). The functional groups, morphology, and magnetic properties of this magnetic nanomaterial were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, X-ray diffraction, and CHN analysis. High-performance liquid chromatography with a photodiode array detector was used to quantify phenol compounds. The experimental parameters affecting the efficiency of the entire MSPE process were optimized. Good linearity in the range of 0.5-1000 µg L^-1 was obtained (depended on the compound). The detection and quantitation limits varied from 0.01 to 0.3 µg L^-1 and 0.03 to 0.9 µg L^-1, respectively. The enrichment factors for all phenol compounds were in the range of 80-285. The precision in terms of intra- and inter-day relative standard deviations were below 5.8% and 6.2%, respectively. The developed MSPE method was applied to analyze phenol compounds in diverse samples, including soil, drinking water, and fruit. Relative recoveries of 76.7-130.1% were obtained. The MIH@PPDA magneto-polymeric sorbent exhibits good stability and is reliable for a variety of phenol compounds.

Application of magnetic nanomaterials in bioanalysis

The importance of magnetic nanomaterials and magnetic hybrid materials, which are classified as new generation materials, in analytical applications is increasingly understood, and research on the adaptation of these materials to analytical methods has gained momentum. Development of sample preparation techniques and sensor systems using magnetic nanomaterials for the analysis of inorganic, organic and biomolecules in biological samples, which are among the samples that analytical chemists work on most, are among the priority issues. Therefore in this review, we focused on the use of magnetic nanomaterials for the bioanalytical applications including inorganic and organic species and biomolecules in different biological samples such as primarily blood, serum, plasma, tissue extracts, urine and milk. We summarized recent progresses, prevailing techniques, applied formats, and future trends in sample preparation-analysis methods and sensors based on magnetic nanomaterials (Mag-NMs). First, we provided a brief introduction of magnetic nanomaterials, especially their magnetic properties that can be utilized for bioanalytical applications. Second, we discussed the synthesis of these Mag-NMs. Third, we reviewed recent advances in bioanalytical applications of the Mag-NMs in different formats. Finally, recently literature studies on the relevance of Mag-NMs for bioanalysis applications were presented.

Environmental aspects of hormones estriol, 17β-estradiol and 17α-ethinylestradiol: Electrochemical processes as next-generation technologies for their removal in water matrices

Hormones as a group of emerging contaminants have been increasingly used worldwide, which has increased their concern at the environmental level in various matrices, as they reach the water bodies through effluents due to the ineffectiveness of conventional treatments. Here we review the environmental scenario of hormones estriol (E3), 17β-estradiol (E2), and 17α-ethinylestradiol (EE2), explicitly their origins, their characteristics, interactions, how they reach the environment, and, above all, the severe pathological and toxicological damage to animals and humans they produce. Furthermore, studies for the treatment of these endocrine disruptors (EDCs) are deepened using electrochemical processes as the remediation methods of the respective hormones. In the reported studies, these micropollutants were detected in samples of surface water, underground, soil, and sediment at concentrations that varied from ng L^-1 to μg L^-1 and are capable of causing changes in the endocrine system of various organisms. However, although there are studies on the ecotoxicological effects concerning E3, E2, and EE2 hormones, little is known about their environmental dispersion and damage in quantitative terms. Moreover, biodegradation becomes the primary mechanism of removal of steroid estrogens removal by sewage treatment plants, but it is still inefficient, which shows the importance of studying electrochemically-driven processes such as the Electrochemical Advanced Oxidation Processes (EAOP) and electrocoagulation for the removal of emerging micropollutants. Thus, this review covers information on the occurrence of these hormones in various environmental matrices, their respective treatment, and effects on exposed organisms for ecotoxicology purposes.

Recent Advances in Magnetic Nanoparticles and Nanocomposites for the Remediation of Water Resources

Water resources are of extreme importance for both human society and the environment. However, human activity has increasingly resulted in the contamination of these resources with a wide range of materials that can prevent their use. Nanomaterials provide a possible means to reduce this contamination, but their removal from water after use may be difficult. The addition of a magnetic character to nanomaterials makes their retrieval after use much easier. The following review comprises a short survey of the most recent reports in this field. It comprises five sections, an introduction into the theme, reports on single magnetic nanoparticles, magnetic nanocomposites containing two of more nanomaterials, magnetic nanocomposites containing material of a biologic origin and finally, observations about the reported research with a view to future developments. This review should provide a snapshot of developments in what is a vibrant and fast-moving area of research.