Enhanced sunlight photocatalytic performance of Sn-doped ZnO for Methylene Blue degradation

Adsorption of Polylactic-co-Glycolic Acid on Zinc Oxide Systems: A Computational Approach to Describe Surface Phenomena

Zinc oxide and polylactic-co-glycolic acid (ZnO-PLGA) nanocomposites are known to exhibit different biomedical applications and antibacterial activity, which could be beneficial for adding to wound dressings after different surgeries. However, possible cytotoxic effects along with various unexpected activities could reduce the use of these prominent systems. This is correlated to the property of ZnO, which exhibits different polymeric forms, in particular, wurtzite, zinc-blende, and rocksalt. In this study, we propose a computational approach based on the density functional theory to investigate the properties of ZnO-PLGA systems in detail. First, three different stable polymorphs of ZnO were considered. Subsequently, the abilities of each system to absorb the PLGA copolymer were thoroughly investigated, taking into account the modulation of electrical, optical, and mechanical properties. Significant differences between ZnO and PLGA systems have been found; in this study, we remark on the potential use of these models and the necessity to describe crucial surface aspects that might be challenging to observe with experimental approaches but which can modulate the performance of nanocomposites.

Ethanol templated synthesis of microporous/mesoporous nanozinc oxide with multi-level structure and its outstanding photo-catalytic properties

Zinc oxide has been of interest because of its efficient redox capacity in the UV spectral region. However, the high bandwidth limits its application in the visible region. Although synthesizing heterojunctions and doping with other elements have become the focus of the problem, it inevitably has an impact on the environment. In contrast, the template method is not only environmentally friendly but also can be used to increase the degradation rate by changing the nanoparticle mesoporous structure. Microporous/mesoporous zinc oxide with multi-level structure was synthesized using anhydrous ethanol as a green templating agent in a mild and energy-efficient method. The prepared nZnO was characterized using XRD, SEM, BET, and HR-TEM. XRD confirmed that the formation of hexagonal wurtzite zincite nZnO with good crystallinity. SEM results showed that the products were flower-like structures composed of nanosheets with a thickness of 20 nm and an average diameter of 400 nm. TEM and BET confirmed the presence of pits with diameters ranging from about 1 nm to 20 nm existed on the surface of the nanosheets, while the specific surface area of 28.05 m2/g and the pore volume of 0.069 cm3/g also provide advantages for nZnO as a photocatalytic material. The synthesized nZnO overcame the disadvantage of responding only in the UV region, and the photocatalytic degradation efficiency of MB reached 93.2% after 60 min of xenon lamp irradiation, and stabilized at 86.15% after five photocycling tests. Compared with other kinds of templates, anhydrous ethanol has the advantages of environmental friendliness and simple post-processing, and it also provides ideas for the synthesis of multilevel structures of other nanomaterials.

Emerging aspects of metal ions-doped zinc oxide photocatalysts in degradation of organic dyes and pharmaceutical pollutants - A review

In recent periods, a broad assortment of continual organic contaminants has been released into our natural water resources. Indeed, it is exceedingly poisonous and perilous to living things; thus, the elimination of these organic pollutants before release into the water bodies is vital. A variety of techniques have been utilized to remove these organic pollutants with advanced oxidation photocatalytic methods with zinc oxide (ZnO) nanoparticles being commonly used as a capable catalyst for contaminated water treatment. Nevertheless, its broad energy gap, which can be only stimulated under an ultraviolet (UV) light source, and high recombination pairs of electrons and holes limit their photocatalytic behaviors. However, numerous methods have been suggested to decrease its energy gap for visible regions. Including, the doping ZnO with metal ions (dopant) can be considered as an effectual route not only the reason for a movement of the absorption edges toward the higher (visible light) region but also to lower the electron-hole pair (e--h+) recombination. This review concentrated on the impact of dissimilar types of metal ions (dopants) on the advancement in the degradation performance of ZnO. So, this work demonstrates a vital review of contemporary attainments in the alteration of ZnO nanoparticles for organic pollutants eliminations. Besides, the effect of doping ions including transition metals, rare earth metals, and metal ions (substitutional and interstitial) concerning numerous types of altered ZnO are summarized. The photodegradation mechanisms for pristine and metal-modified ZnO nanoparticles are also conferred.

Morphological evaluation and boosted photocatalytic activity of N-doped ZnO nanoparticles prepared via Co-precipitation method

Pristine and nitrogen (N) doped zinc oxide (ZnNxO1-x, x = 0, 0.005, 0.01, and 0.02) nanoparticles (NPs) were successfully synthesized using chemical co-precipitation approach. The formation of pure crystalline wurtzite ZnO phase without any second phase during N-doping was confirmed by X-ray diffraction (XRD) analysis of N-doped ZnO samples. X-ray photoelectron spectroscopic (XPS) analysis ensured the effective inclusion of nitrogen into ZnO matrix. The morphological analysis revealed the formation of nanorods as a result of N-doping. The optical band gap calculated from UV-vis spectroscopy was observed to decrease up to 1 mol.% N doping followed by a subtle increase. Photoluminescence (PL) spectra revealed that electron-hole recombination was the least for 1 mol.% N doped ZnO NPs. ZnN0.01O0.99 NPs showed superior photocatalytic activity among all samples due to rod-shaped NPs and reduced electron-hole recombination, which was accessed by the photodegradation of Rhodamine B (RhB).

Dopant-driven recombination delay and ROS enhancement in nanoporous Cd1-xCuxS heterogeneous photocatalyst for the degradation of DR-23 dye under visible light irradiation

Developing an efficient heterogeneous photocatalyst for environmental remediation and treatment strategies using visible light harvesting processes is promising but challenging. Herein, Cd1-xCuxS materials have been synthesized and characterized by precise analytical tools. Cd1-xCuxS materials exhibited excellent photocatalytic activity for direct Red 23 (DR-23) dye degradation in visible light irradiation. The operational parameters, like dopant concentration, photocatalyst dose, pH, and initial concentration of dye were investigated during the process. The photocatalytic degradation process follows pseudo-first-order kinetics. As compared to other tested materials, 5% Cu doped CdS material revealed superior photocatalytic performance for the degradation of DR-23 (k = 13.96 × 10-3 min-1). Transient absorption spectroscopy, EIS, PL, and transient photocurrent indicated that adding copper to the CdS matrix improved the separation of photo-generated charge carriers by lowering the recombination rate. Spin-trapping experiments recognized the photodegradation primarily based on secondary redox products, i.e., hydroxyl and superoxide radicals. According to by Mott-Schottky curves, photocatalytic mechanism and photo-generated charge carrier density were elucidated regarding dopant-induced valence and conduction bands shifting. Thermodynamic probability of radical formation in line with the altered redox potentials by Cu doping has been discussed in the mechanism. The identification of intermediates by mass spectrometry study also showed a plausible breakdown mechanism for DR-23. Moreover, samples treated with nanophotocatalyst displayed excellent results when tested for water quality metrics such as DO, TDS, BOD, and COD. Developed nanophotocatalyst shows high recyclability with superior heterogeneous nature. 5% Cu-doped CdS also exhibit strong photocatalytic activity for the degradation of colourless pollutant bisphenol A (BPA) under visible light (k = 8.45 × 10-3 min-1). The results of this study offer exciting opportunities to alter semiconductors' electronic band structures for visible-light-induced photocatalytic activity for wastewater treatment.

Improved Photocatalytic and Antioxidant Activity of Olive Fruit Extract-Mediated ZnO Nanoparticles

Photodegradation is an efficient strategy for the removal of organic pollutants from wastewater. Due to their distinct properties and extensive applications, semiconductor nanoparticles have emerged as promising photocatalysts. In this work, olive (Olea Europeae) fruit extract-based zinc oxide nanoparticles (ZnO@OFE NPs) were successfully biosynthesized using a one-pot sustainable method. The prepared ZnO NPs were systematically characterized using UV-Vis, FTIR, SEM, EDX and XRD and their photocatalytic and antioxidant activity was evaluated. SEM demonstrated the formation of spheroidal nanostructures (57 nm) of ZnO@OFE and the EDX analysis confirmed its composition. FTIR suggested the modification/capping of the NPs with functional groups of phytochemicals from the extract. The sharp XRD reflections revealed the crystalline nature of the pure ZnO NPs with the most stable hexagonal wurtzite phase. The photocatalytic activity of the synthesized catalysts was evaluated by measuring the degradation of methylene blue (MB) and methyl orange (MO) dyes under sunlight irradiation. Improved degradation efficiencies of 75% and 87% were achieved within only 180 min with photodegradation rate constant k of 0.008 and 0.013 min^-1 for MB and MO, respectively. The mechanism of degradation was proposed. Additionally, ZnO@OFE NPs exhibited potent antioxidant activity against DPPH, hydroxyl, peroxide and superoxide radicals. Hence, ZnO@OFE NPs may have potential as a cost-effective and green photocatalyst for wastewater treatment.

First-principles study on the electronic structure and photocatalytic property of a novel two-dimensional ZrS2/InSe heterojunction

Photocatalytic water cracking technology provides a broad prospect for solving the current energy crisis using solar energy and water resources. In this paper, a two-dimensional ZrS₂/InSe heterojunction for accelerating the process of hydrogen production from water decomposition was constructed, and its electronic structure and photocatalytic property were studied using first-principles calculation. The results show that the lattice mismatch rate of the heterojunction from monolayer ZrS₂ and monolayer InSe is 2.48%, and its binding energy is -1.696 eV, indicating that the structure of the heterojunction is stable. The ZrS₂/InSe heterojunction is an indirect bandgap with a bandgap value of 1.41 eV and a typical type-II band arrangement. Importantly, the ZrS₂/InSe heterostructure has a Z-scheme structure, which is beneficial to the separation of photogenerated electron hole pairs. Moreover, the ZrS₂/InSe heterojunction has a strong absorption ability for visible light (up to 3.84 × 10⁵ cm^-1), which is helpful for improving its photocatalytic efficiency. The two-dimensional ZrS₂/InSe heterojunction is a very promising photocatalyst, as concluded from the above studies.

Silica sand-supported nano zinc oxide-graphene oxide composite induced rapid photocatalytic decolorization of azo dyes under sunlight and improved antimicrobial activity

Here, silica sand-supported heterojunction composite of nano zinc oxide (nZnO) and graphene oxide nanosheet (nZnO-GO@SS) was prepared, and its potential as an efficient photocatalyst for the degradation of methylene blue (MB) and Rhodamine-B (Rh-B) under sunlight was demonstrated. Transmission electron microscopy confirmed the uniform distribution of spherically shaped nZnO of average size of approximately 8 nm over graphene oxide nanosheet (GO) in the composites. Photodegradation yields of 95.3% and 97.5% for 100 ppm of MB and Rh-B dye within 150 and 220 min, respectively, were achieved under sunlight by the prepared nanocatalyst (nZnO-GO), while sand microparticle-supported nanocatalyst (nZnO-GO@SS) demonstrated faster degradation of MB and Rh-B, i.e., within 120 and 160 min, respectively. Furthermore, when the recyclability of the photocatalyst was studied, the nZnO-GO exhibited more than 80% degradation efficiency after five cycles for both the dyes and nZnO-GO@SS demonstrated 10% higher (~90%) removal capability after five cycles of reuse. Furthermore, the antibacterial assay showed complete inactivation of Escherichia coli and Staphylococcus aureus bacterial strain by nZnO-GO@SS. Hence, our proposed strategy for the removal of toxic dyes from the aquatic environment under sunlight proved that sand microparticle-supported nanocatalyst (nZnO-GO@SS) might be a superior, cost-effective, and suitable photocatalytic system for industrial applications toward toxic dye removal and decontamination from industrial wastewater.

Zn3Sb4O6F6 and KI-Doped Zn3Sb4O6F6: A Metal Oxyfluoride System for Photocatalytic Activity, Knoevenagel Condensation, and Bacterial Disinfection

Zn₃Sb₄O₆F₆ crystallites were synthesized by a pH-regulated hydrothermal synthetic approach, while doping on Zn₃Sb₄O₆F₆ by KI was performed by the "incipient wetness impregnation technique." The effect of KI in Zn₃Sb₄O₆F₆ is found with the changes in morphology in the doped compound, i.e., needle-shaped particles with respect to the irregular cuboid and granular shaped in the pure compound. Closer inspection of the powder diffraction pattern of doped compounds also reveals the shifting of Braggs' peaks toward a lower angle and the difference in cell parameters compared to the pure compound. Both metal oxyfluoride comprising lone pair elements and their doped compounds have been successfully applied as photocatalysts for methylene blue dye degradation. Knoevenagel condensation reactions were performed using Zn₃Sb₄O₆F₆ as the catalyst and confirmed 99% yield even at 60 °C temperature under solvent-free conditions. Both pure and KI-doped compounds were tested against several standard bacterial strains, i.e., Enterobacter sp., Escherichia coli, Staphylococcus sp., Salmonella sp., Bacillus sp., Proteous sp., Pseudomonas sp., and Klebsiella sp. by the "disk diffusion method" and their antimicrobial activities were confirmed.

Rational construction of ZnO/CuS heterostructures-modified PVDF nanofiber photocatalysts with enhanced photocatalytic activity

PVDF/ZnO/CuS photocatalysts with ZnO/CuS heterojunctions were synthesized via electrospinning, hydrothermal, and ion-exchange techniques. As matrix materials, electrospun PVDF nanofibers are easy to be recycled and reused. ZnO nanorods anchored on PVDF nanofiber with high specific surface area provide abundant active reaction sites for photocatalysis. While the loaded CuS nanoparticles as a photosensitizer compensate the low quantum efficiency of ZnO and improve the visible-light photocatalytic efficiency. As a result, the PVDF/ZnO/CuS composited photocatalyst exhibits outstanding photocatalytic performance in exposure to UV and visible light owing to the suppressed recombination of electron-hole pairs and widened visible light absorption range. The kinetic constants of PVDF/ZnO/CuS nanocomposites under UV irradiation (9.01 × 10^-3 min^-1) and visible light (6.53 × 10^-3 min^-1) irradiation were 3.66 and 2.53 times higher than that of PVDF/ZnO (2.46 × 10^-3 min^-1 & 2.58 × 10^-3 min^-1), respectively. Furthermore, PVDF/ZnO/CuS nanocomposites demonstrate excellent robustness in terms of recycling and reuse, which is advantageous in practical applications.

Mn3O4@ZnO Hybrid Material: An Excellent Photocatalyst for the Degradation of Synthetic Dyes including Methylene Blue, Methyl Orange and Malachite Green

In this study, we synthesized hybrid systems based on manganese oxide@zinc oxide (Mn₃O₄@ZnO), using sol gel and hydrothermal methods. The hybrid materials exhibited hierarchical morphologies and structures characterized by the hexagonal phase of ZnO and the tetragonal phase of Mn₃O₄. The hybrid materials were tested for degradation of methylene blue (MB), methyl orange (MO), and malachite green (MG) under ultraviolet (UV) light illumination. The aim of this work was to observe the effect of various amounts of Mn₃O₄ in enhancing the photocatalytic properties of ZnO-based hybrid structures towards the degradation of MB, MO and MG. The ZnO photocatalyst showed better performance with an increasing amount of Mn₃O₄, and the degradation efficiency for the hybrid material containing the maximum amount of Mn₃O₄ was found to be 94.59%, 89.99%, and 97.40% for MB, MO and MG, respectively. The improvement in the performance of hybrid materials can be attributed to the high charge separation rate of electron-hole pairs, the co-catalytic role, the large number of catalytic sites, and the synergy for the production of high quantities of oxidizing radicals. The performance obtained from the various Mn₃O₄@ZnO hybrid materials suggest that Mn₃O₄ can be considered an effective co-catalyst for a wide range of photocatalytic materials such as titanium dioxide, tin oxide, and carbon-based materials, in developing practical hybrid photocatalysts for the degradation of dyes and for wastewater treatment.

Effect of doping and loading Parameters on photocatalytic degradation of brilliant green using Sn doped ZnO loaded CSAC

Sn doped ZnO loaded cotton stalk activated carbon (Sn-ZnO/CSAC) was prepared by chemical precipitation method, and the products were characterized. The XRD resultants confirm that the presence of hexagonal wurtzite phase of the bare ZnO. Furthermore, particular particle size gradually decreases (21.49 nm) due to doping and loading. UV-Vis absorption intensity of doped/loaded sample was red-shifted and then PL intensity is reduced. The photocatalytic performances of bare, Sn-doped ZnO and Sn-ZnO/CSAC was estimated by photodegradation of brilliant green (BG) under sunlight. The photodegradation of BG dye in 120 min over Sn-doped ZnO/CSAC is nearly 96.52%, which is considerably improved than bare ZnO (72.60%), respectively.

Improving photocatalytic activity of the ZnS QDs via lanthanide doping and photosensitizing with GO and g-C3N4 for degradation of an azo dye and bisphenol-A under visible light irradiation

In this research, insertion of Gd ions (2 wt%) into the crystalline lattice of the ZnS QDs enhanced the photocatalytic activity of the QDs. In addition, the influence of graphene oxide (GO) and graphitic carbon nitride (g-C₃N₄) was assessed on the photocatalytic activity of the ZnS QDs through degradation of acid red 14 (AR14) and bisphenol-A (BA) under visible light. Higher photocatalytic degradation efficiency (97.1% for AR14 and 67.4% for BA within 180 min) and higher total organic carbon (TOC) removal (67.1% for AR14 and 59.2% for BA within 5 h) was achieved in the presence of ZnS QDs/g-C₃N₄ compared with ZnS QDs/GO nanocomposite. Finally, the Gd-doped ZnS QDs were hybridized with g-C₃N₄ as optimal support to fabricate a potent visible-light-driven photocatalyst for the decomposition of organic contaminants. The maximum photocatalytic degradation of 99.1% and 80.5% were achieved for AR14 and BA, respectively, in the presence of Gd-doped ZnS QDs/g-C₃N₄ nanocomposite. The photosensitization mechanism was suggested for the improved photocatalytic activity of the ZnS QDs/GO, ZnS QDs/g-C₃N₄, and Gd-doped ZnS QDs/g-C₃N₄ nanocomposites under visible light.

The Oxygen Vacancy Defect of ZnO/NiO Nanomaterials Improves Photocatalytic Performance and Ammonia Sensing Performance

In this paper, ZnO/NiO composites rich in oxygen vacancies are prepared by the solvothermal method and reduction method. In the test, through the use of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscope (TEM), diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and electron paramagnetic resonance (EPR), we effectively prove the existence of phase, morphology and oxygen vacancies in the material. Through the photocatalysis test and gas sensitivity test, it is found that 10% Ni doped OZN-10 has the best photocatalytic activity and gas sensitivity characteristics. The degradation rate of methylene blue (MB) was 98%. The gas sensitivity test shows that OZN-10 has good selectivity, good response performance (3000 ppm, 27,887%) and excellent response recovery time (response time: 50 s, recovery time: 5–7 s) for saturated NH₃ gas at standard atmospheric pressure (101.325 KPa) and room temperature (25 °C). The synergistic effect of oxygen vacancy as the center of a trap and p–n heterojunction forming an electric potential field at the interface is explained, and the mechanism of improving photocatalysis and gas sensitivity is analyzed. This work will provide an innovative vision for dual-performance oxygen vacancy modification of heterojunctions through photocatalysis.

Preparation and Characterization of Cu and Al Doped ZnO Thin Films for Solar Cell Applications

The Al- and Cu-doped ZnO nanostructured films in this study were deposited using a sputtering technique. Investigations based on X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, Hall effect measurements, and optical transmission spectroscopy was performed to analyze the structural, electrical, and optical characteristics of the prepared Al–ZnO and Cu–ZnO nanostructured films. The analyses show that doping results in enhanced conductivity as well as improved mobility in Al–ZnO and Cu–ZnO films in comparison to pure ZnO films. The Al- and Cu-doped ZnO films exhibited low resistivity (2.9 × 10−4 Ω cm for Al–ZnO and 1.7 × 10−4 Ω cm for Cu–ZnO) along with an average transmittance of around 80% in the visible spectrum. Moreover, the optical bandgaps of undoped ZnO, Al–ZnO, and Cu–ZnO nanostructures were observed as 3.3, 3.28, and 3.24 eV, respectively. Finally, solar cells were assembled by employing ZnO nanostructured thin films as photoelectrodes, resulting in efficiencies of 0.492% and 0.559% for Al–ZnO- and Cu–ZnO-based solar cells, respectively.

Anisotropic ZnO nanostructures and their nanocomposites as an advanced platform for photocatalytic remediation

In pursuit of advanced heterogeneous photocatalysts, ZnO has emerged as a promising option for solar-driven heterogeneous photocatalyst with many advantageous properties (e.g., optical band structure and electronic properties). However, as the efficacy of such system can also be limited by a number of demerits (e.g., fast recombination of charge carriers and limited photon absorption), considerable efforts are needed for its effective and practical scale-up. This article provides a detailed literature review of the synthesis and modification of ZnO nanostructures with tuned band structures and controllable morphologies for solar light harvesting. The potential of anisotropic ZnO nanostructures is also discussed with respect to the photocatalytic degradation of organic/inorganic water pollutants. Further, the role of various metal dopants is discussed for the enhancement of photocatalytic activity along with evaluation of their photocatalytic performances under UV-visible or solar irradiation. Finally, our discussions are expanded to describe the prospects of developed ZnO nano-photocatalysts for real-world applications with respect to light-harvesting efficiency and mechanical stability.

Continuous-Flow Photocatalytic Microfluidic-Reactor for the Treatment of Aqueous Contaminants, Simplicity, and Complexity: A Mini-Review

Water pollution is a growing global issue; there are many approaches to treating wastewater, including chemical coagulation, physical adsorption, and chemical oxidation. The photocatalysis process has provided a solution for removing pollutants from wastewater, where the pair of the photoelectron and hole works through an asymmetric way to degrade the contaminants under UV irradiation. This method offers an alternative route for treating the pollutant with a lower energy cost, high efficiency, and fewer byproducts. A continuous-flow microfluidic reactor has a channel size from tens to thousands of micrometers, providing uniform irradiation and short diffusion length. It can enhance the conversion efficiency of photocatalysis due to the simple spatial symmetry inside the microreactor channel and among the individual channels. In addition, the bandgap of TiO2, ZnO, or other photocatalyst nanoparticles with symmetric crystal structure can be modified through doping or embedding. In this mini-review, a review of the reported continuous-flow photocatalytic microfluidic reactor is discussed from the perspective of both microreactor design and material engineering.

Synthesis, photocatalytic and antidiabetic properties of ZnO/PVA nanoparticles

A series of ZnO and ZnO/poly(vinyl alcohol) (PVA) catalysts were prepared using sol–gel method. An X-ray diffraction analysis confirmed the existence of the wurtzite ZnO phase, and scanning electron microscopy (SEM) observation revealed the formation of spherical ZnO and ZnO/PVA nanoparticles. The decomposition of methylene blue (MB) and methyl orange (MO) induced by the synthesized pure ZnO and ZnO/PVA nanoparticles was studied under ultraviolet–visible irradiation. Among the catalysts evaluated, ZnO/5PVA was the most active in the decomposition of MB, whereas ZnO/7PVA was the most active catalyst in the decomposition of MO. Moreover, an investigation of the biological activity of pure ZnO and ZnO/PVA indicated that ZnO/5PVA exhibited the best performance in lowering the glucose level in diabetic rats.

Sunlight-driven enhanced photocatalytic activity of bandgap narrowing Sn-doped ZnO nanoparticles

In this paper, we grab to utilize one of the trending techniques with efficient implications in wastewater treatment of organic pollutants, the photocatalytic degradation method shining out in the research field. Herein, tin (Sn)-doped zinc oxide (ZnO) nanoparticles (NPs) (Sn/ZnO) with different doping concentrations (1, 2, 3, 4, and 5 wt%) were synthesized via a simple co-precipitation assisted method and later subjected for their physico-chemical, morphological, and optical characterization. In addition, photocatalytic activity as the concerned study was investigated as to record the different doping levels of Sn/ZnO to examine the effect of doping concentration in relation with the degradation efficiency. We know that the optical bandgap of pure ZnO was 3.26 eV while it tends to increase slightly upon increasing the doping concentration. In the present investigation, methylene blue (MB) dye was used as a model pollutant to evaluate the photocatalytic activity of Sn/ZnO photocatalysts under natural sunlight. Varied doping concentrations of Sn/ZnO were compared with different characterization techniques while XRD analysis shows up 4-Sn/ZnO with sharp peak at (1 0 1) plane with smaller grain size in comparison to other Sn/ZnO samples. The morphological recognition depicts the hexagonal structure with smaller size for 4-Sn/ZnO which offers more active sites with improved photocatalytic activity, higher surface area for the transportation of pollutants. Fluorescence spectra results revealed that Sn dopant suppresses the charge carrier recombination. The lower intensity of PL indicated reduced recombination rate, which resulted in enhancing the photocatalytic activity. To investigate the possible mechanism, kinetics and reusability studies were performed. The 4% Sn-doped ZnO nanoparticle concentration showed highest photocatalytic activity when compared with other doping levels.

W-Doped ZnO Photocatalyst for the Degradation of Glyphosate in Aqueous Solution

In this paper, the photocatalytic degradation of glyphosate by zinc oxide (ZnO) photocatalysts doped with tungsten (W) was investigated under solar simulated light. The photocatalysts were successfully synthesized through a simple precipitation method and subsequently characterized by different techniques: Raman spectroscopy, UV–Vis, N2 adsorption at −196 °C, X-ray diffraction, and SEM analysis. In particular, all the prepared catalysts were characterized by a crystallite size of about 28 nm and a hexagonal wurtzite structure. After the W doping, the bandgap energy decreased from 3.22 of pure ZnO to 3.19 for doped ZnO. This allowed us to obtain good results in terms of glyphosate degradation and simultaneous mineralization under solar simulated lamps, making the process environmentally friendly and with almost zero energy costs. In particular, the best photocatalytic performance was obtained with 100 W-ZnO (prepared with 1.5 mol% of W). With this catalyst, after 180 min of exposure to solar simulated light, the glyphosate degradation and mineralization was equal to 74% and 30%, respectively. Furthermore, it has been shown that the best catalyst dosage was equal to 1.5 g/L. The study on the influence of pH evidenced that the best photocatalytic performances are obtained at spontaneous (neutral) pH conditions. Finally, to determine the main reactive species in the glyphosate oxidation, the effects of different radical scavengers were tested. The results evidenced that the glyphosate oxidation mechanism seems to be related mainly to the O2•− generated under simulated solar light irradiation, but also in minor part to h+.

Synthesis and photocatalytic activity of porous ZnO stabilized by TiO2 and Fe3O4 nanoparticles: investigation of pesticide degradation reaction in water treatment

The present research studies the photocatalytic degradation of a pesticide using TiO₂ and Fe₃O₄ nanoparticles supported on ZnO mesoporous (mZnO) substrate. Chlorpyrifos is an organophosphate pesticide with a C₉H₁₁Cl₃NO₃PS chemical formula. It is broadly utilized in agricultural fields to control product pests. The chlorpyrifos toxicity is acute and still dangerous to any aquatic organisms. The mZnO/TiO₂-Fe₃O₄ material was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), and N₂ adsorption and desorption (Brunauer-Emmett-Teller; BET). In order to optimize three important operating parameters, i.e., chlorpyrifos concentration, mZnO/TiO₂-Fe₃O₄ nanocomposite amount, and pH, for photocatalytic degradation of chlorpyrifos, response surface methodology (RSM) was applied. The central composite design (CCD) including 20 experiments was used to conduct experiments. The highest photodegradation performance of about 94.8% was obtained for a chlorpyrifos concentration of 8 ppm, a pH of 10, and an amount of mZnO/TiO₂-Fe₃O₄ nanocomposite of 60 mg. The degradation of chlorpyrifos using mZnO/TiO₂-Fe₃O₄ presented good performance (more than 94%). The photocatalytic reaction followed pseudo-first-order kinetics with a rate constant of 0.058 min^-1 for chlorpyrifos degradation. The results propose that mZnO/TiO₂-Fe₃O₄ nanocomposite is a suitable alternative for the degradation of chlorpyrifos in aqueous solution. The improved photocatalytic efficiency could be attributed to the effective separation of electron-hole pairs via a Z-scheme mechanism.

Sisal-like Sn2+ doped ZnO hierarchical structures: synthesis, growth mechanism, and their application in photocatalysis

Sisal-like Sn doped ZnO hierarchical structures were prepared by the hydrothermal method without employing templates or matrices. The architectures show enhanced light absorption, high photocatalytic properties, good stability and reusability.

Electronic Tuning of Zinc Oxide by Direct Fabrication of Chromium (Cr) incorporated photoanodes for Visible-light driven Water Splitting Applications

Herein, we report the synthesis of Cr incorporated ZnO sheets arrays microstructures and construction of photoelectrode through a direct aerosol assisted chemical vapour deposition (AACVD) method. The as-prepared Cr incorporated ZnO microstructures were characterized by transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, powdered X-ray spectroscopy, X-ray photoelectron spectroscopy and UV-Vis diffused reflectance spectroscopy. The Cr incorporation in ZnO red shifted the optical band gap of as-prepared photoanodes. The 15% Cr incorporation in ZnO has shown enhanced PEC performance. The AACVD method provides an efficient in situ incorporation approach for the manipulation of morphological aspects, phase purity, and band structure of photoelectrodes for an enhanced PEC performance.

The Nanosized Dye Adsorbents for Water Treatment

Clean water is a vital element for survival of any living creature and, thus, crucially important to achieve largely and economically for any nation worldwide. However, the astonishingly fast trend of industrialization and population growth and the arisen extensive water pollutions have challenged access to clean water across the world. In this regard, 1.6 million tons of dyes are annually consumed. Thereof, 10%–15% are wasted during use. To decolorize water streams, there is an urgent need for the advanced remediation approaches involving utilization of novel materials and technologies, which are cost and energy efficient. Nanomaterials, with their outstanding physicochemical properties, can potentially resolve the challenge of need to water treatment in a less energy demanding manner. In this review, a variety of the most recent (from 2015 onwards) opportunities arisen from nanomaterials in different dimensionalities, performances, and compositions for water decolorization is introduced and discussed. The state-of-the-art research studies are presented in a classified manner, particularly based on structural dimensionality, to better illustrate the current status of adsorption-based water decolorization using nanomaterials. Considering the introduction of many newly developed nano-adsorbents and their classification based on the dimensionality factor, which has never been employed for this sake in the related literature, a comprehensive review will be presented.

Plasmonic photocatalytic activity of ZnO:Au nanostructures: Tailoring the plasmon absorption and interfacial charge transfer mechanism

ZnO:Au nanostructures with tunable surface Plasmon band were synthesizedvia co-precipitation method. X-ray diffraction analysis, high resolution transmission electron microscopy and Raman spectra confirmed the hexagonal wurtzite phase for these ZnO:Au nanostructures with preferential growth along the (101) plane. The selective enhancement in the intensity of Raman band due to the excited free electrons of Au nanoparticles confirmed the incorporation of Au in ZnO matrix. Scanning electron microscopic images showed the transformation of morphology of these nanostructures from rod geometry to rose flower and then to marigold flower-like structures with increase in the Au content. Detailed investigations were carried out to understand the role of plasmons present in the ZnO:Au nanostructures on the photocatalytic degradation of sulforhodamine B under sunlight. It is found that ZnO:Au nanostructures with plasmon band in the close approximation of solar maximum ˜550 nm as catalysts exhibit ultra-fast degradation of the dye. This highly efficient photocatalytic activity of these nanostructures is attributed to the electron scavenging action of Au due to its high electronegativity, enhanced absorption of sunlight due to plasmons, the enhanced surface area of ZnO:Au nanostructures and the formation of Schottky barrier between the Au and ZnO interface. The reusability and photostability of these catalysts were tested through repetitive cycles and demonstrated that these nanostructures can form excellent reusable photocatalysts for the degradation of toxic organic waste in water.

Cellulose Nanocrystal-ZnO Nanohybrids for Controlling Photocatalytic Activity and UV Protection in Cosmetic Formulation

A high-performance semiconductor zinc oxide (ZnO) on melamine formaldehyde-coated cellulose nanocrystals (MFCNCs) was synthesized and evaluated for its application in smart cosmetics. These ZnO@MFCNC hybrid nanostructures were evaluated for their in vitro sun protection factor performance and photocatalytic activity under simulated UV and solar radiation. The photodegradation kinetics of a model pigment (methylene blue) was fitted to the Langmuir-Hinshelwood model. A 4-fold increase in the photocatalytic activity of ZnO@MFCNCs was observed when compared to pure ZnO. This is associated with (i) increased specific surface area provided by the MFCNC template, (ii) confined surface energy and controlled growth of ZnO nanoparticles, and (iii) entrapment of photoinduced charge carriers in the pores of the core-shell MFCNC rod, followed by fast promotion of interfacial e-charge transfer to the surface of the catalyst. The present study demonstrates how an increase in photocatalytic activity can be engineered without the introduction of structural defects or band gap tailoring of the semiconductor. The aqueous-based ZnO@MFCNC hybrid system displayed attractive UV-absorption and photocatalytic characteristics, offering the conversion of this renewable and sustainable technology into intelligent cosmetic formulations.

Data on the growth of ZnO nanorods on Nylon 6 and photocatalytic activity

ZnO was successfully synthesized by a conventional synthetic route using zinc nitrate as a source for ZnO formation. X-ray diffraction and thermogravimetric analysis revealed a crystal size of 66 nm of ZnO and a thermal stability of 500 °C. A small amount of ZnO particles was employed as the source for ZnO-rod growth on nylon 6 surfaces. Scanning electron microscope images were taken to evaluate the morphological properties of ZnO, which presented as a hexagonal needle-like shape. Preliminary evaluation of photocatalytic activity was performed through measurement of the degradation of methylene blue solution over 4 h.

Recent advances in photocatalytic treatment of pollutants in aqueous media

Photocatalysis can be an excellent solution for resolving the world's energy and environmental problems. It has a wide range of applications for the decontamination of diverse hazardous pollutants in aqueous media. Technological progress in this research field has been achieved toward the improvement of the solar sensitivity to enhance the efficiency of pollutant decontamination. As a result, various strategies have been introduced to upgrade photocatalytic performance with the modification of prototypical photocatalyst such as doping, dye sensitization, semiconductor coupling, mesoporous supports, single site, and nano-based catalysts. In this review, a brief survey is presented to describe those strategies based on the evaluation made against various pollutants (such as pharmaceuticals, pesticides, heavy metals, detergents, and dyes) in aqueous media.