Green synthesis and Characterization of Copper oxide nanoparticles using Calotropis procera leaf extract and their different biological potentials

Bioinspired synthesis of copper oxide nanoparticles using aqueous extracts of Cladophora glomerata (L.) Kuetz and their potential biomedical applications

Present study deals with the green fabrication of copper oxide nanoparticles (CuO NPs) employing cell-free aqueous extract of Cladophora glomerata (L.) Kuetz, freshwater algal species. The UV-visible, FTIR, XRD, FESEM, HRTEM, EDX, BET, XPS and Raman spectroscopic techniques were used to confirm and characterize the biosynthesized CuO NPs. The UV-Vis analysis revealed a sharp peak at 264 nm with a band gap of 3.7 eV, which was attributable to the fabrication of CuO NPs. FESEM and HRTEM detect the spherical-shaped morphology with size between 40 and 50 nm. The biochemical profiling of cell free extract of the C. glomerata by Gas chromatography-mass spectrometry (GC-MS) revealed the presence of various bioactive biomolecules that may acts as a precursor for the fabrication of CuO NPs. The antibacterial study of fabricated CuO NPs revealed significant growth inhibitory potential against selected bacterial strains Klebsiella pneumoniae and Bacillus cereus with an IC50 value of 10 μg/ml. The synthesized CuO NPs also displayed strong DPPH radical scavenging (IC50 value 11.25 mg/L) and total antioxidant (IC50 value 11 mg/L) properties. Further, the anticancer activity of fabricated CuO NPs was studied employing a human hepatocellular carcinoma (HepG2) cell line by MTT assay, which marks their ability to diminish the 50% cell with IC50 value of 168.6 µg/ml. Overall, the findings confirmed that CuO NPs fabricated employing cell-free extract of C. glomerata have the potential to be used as active agent in various biomedical applications after further detailed clinical investigations.

<i>Tinospora cordifolia</i> - A Future Green Material for Copper Oxide Nanoparticle-based Drug, Reduces the Risk of Diabetes and Cancer

Background: Copper nanoparticles (CuONPs) have garnered significant attention for their unique properties and potential applications in agriculture, medicine, and environmental science. Using eco-friendly methods, the stem extract of Tinospora cordifolia, a medicinal plant known for its bioactive compounds, can act as a reducing agent for CuONP synthesis. This approach minimises environmental impact while leveraging the plant’s inherent medicinal properties. Aim: To synthesise and characterise CuONPs using T. cordifolia stem extract and evaluate their agricultural, anti-diabetic, and anticancer applications. Methods: Copper nanoparticles were synthesised using T. cordifolia stem extract. UV-visible spectroscopy identified the characteristic plasmon resonance peak at 300 nm, while X-Ray Diffraction (XRD) confirmed the crystalline structure of CuONPs. Fourier Transmission Infrared Spectroscopy (FTIR) indicated the stabilization of CuONPs by biomolecules. Scanning Electron Microscopy (SEM) and energy dispersive X-ray (EDX) revealed an approximate size of 100 nm in one dimension. Applications included hydroponic lettuce growth enhancement, anti-diabetic activity (via α-glucosidase inhibition), and anticancer efficacy (via MTT assay on MCF-7 cell lines). Results: The CuONPs improved lettuce growth under hydroponics by enhancing moisture content, leaf length, and plant weight at a concentration of 25 mg/L. In biomedical studies, CuONPs exhibited significant anti-diabetic activity with an IC50 value of 95.42 μg/mL and potent anticancer activity with an IC50 value of 35.51 μg/mL against MCF-7 cells. Conclusion: Biogenic CuONPs synthesised using T. cordifolia demonstrate promising multifunctional applications. Their eco-friendly synthesis, agricultural benefits, and biomedical efficacy suggest they are a sustainable and versatile nanomaterial for future use. Major Findings: CuONPs synthesized using Tinospora cordifolia stem extract enhanced hydroponic lettuce growth, exhibited anti-diabetic activity (IC50: 95.42 μg/mL), and demonstrated potent anticancer effects (IC50: 35.51 μg/mL) against MCF-7 cells, highlighting their multifunctional potential.

Green synthesized silicon dioxide nanoparticles (SiO2NPs) ameliorated the cadmium toxicity in melon by regulating antioxidant enzymes activity and stress-related genes expression

Green synthesized nanoparticles (NPs) are an eco-friendly and cost-effective approach to reduce heavy metal stress in plants. Among heavy metals, cadmium (Cd) possesses higher toxicity to the crops and ultimately reduces their growth and yield. The current study aims to evaluate the effectiveness of green synthesized SiO2NPs to reduce toxic effects of Cd in melon (Cucumis melo) by regulating physiological parameters, enhancing antioxidant enzyme activity, and modulating stress-related gene expression. The SiO2NPs were synthesized using Artemisia annua plant extract having spherical shape and size within the range of 40-70 nm and characterized using advanced spectroscopic and analytical techniques. The application of SiO2NPs (75 mg/L) significantly improved physiological parameters such as shoot length (SL), root length (RL), leaf fresh weight (LFW), root fresh weight (RFW), leaf dry weight (LDW) and root dry weight (RDW) by 14%, 20%, 15%, 16%, 14%, and 28%, respectively, compared to Cd-stressed plants. Photosynthetic pigments (chlorophyll and carotenoids) showed a notable increase of 15% and 40%, respectively. Furthermore, the activities of antioxidant enzymes such as SOD, POD, CAT, and APX were enhanced by 28.67%, 35.45%, 32.07%, and 42.75%, respectively. In addition, applying SiO2NPs increased the concentration of macronutrients N, P, and K by 33%, 40%, and 37%, respectively, compared to Cd-stressed plants. Moreover, SiO2NPs upregulated the expression of several stress-related genes and reduced Cd accumulation in shoots and roots. This study reveals that green synthesized SiO2NPs effectively reduced the Cd toxicity in melon by improving morphological and physiological parameters, enhancing antioxidant enzyme activity, and regulating the expression of stress-related genes. These findings suggest that green synthesized SiO2NPs could play a crucial role in sustainable agriculture by protecting crops from heavy metal stress.

ρ-Coumaric acid-zinc oxide nanoparticles improve post-thaw quality of goat spermatozoa and developmental competence of fertilized oocytes in vitro

Excessive production of reactive oxygen species (ROS) during cryopreservation and post-thawing affects sperm quality and subsequent fertilizing capacity. Nanoparticles (NPs) with antioxidative properties can improve sperm function and male fertility. The aim of this study was to assess the effect of 100 µM ρ-coumaric acid (ρ-CA), 0.1 µM ρ-CA-NPs (PCNPs), 150 µg/mL zinc chloride (ZnCl2), 1 µg/mL zinc oxide-NPs (ZnO-NPs), ρ-CA + ZnCl2, PCNPs + ZnO-NPs, 0.001 µM of ρ-CA loaded on ZnO-NPs (ρ-CA-ZnONPs) on goat sperm parameters and fertilizing ability after cryopreservation. Semen samples from five Saanen goats were used. Various concentrations of treatments were incubated to determine the optimal concentrations for assessing sperm motility and viability. Subsequently, samples were filled with 0.5-mL straws, frozen, and stored in liquid nitrogen (- 196 °C). Evaluations of post-thaw spermatozoa parameters and fertilizing ability were performed. Addition of ρ-CA-ZnONPs and PCNPs + ZnO-NPs significantly increased sperm viability, motility, plasma membrane integrity, blastocyst rate, and blastocyst quality compared with the other treatments. Moreover, using ρ-CA-ZnONPs significantly decreased lipid peroxidation and DNA damage compared with the other treatments. In conclusion, spermatozoa are cryotolerant, resistant to post-thaw conditions, and have fertilizing ability that can be increased by adding ρ-CA-ZnONPs as an antioxidant to goat semen extenders.

Biogenic synthesis and physicochemical characterization of metal nanoparticles based on Calotropis procera as promising sustainable materials against skin cancer

The UAE harbors a rich diversity of wild medicinal plants, such as Calotropis procera (CP), that are renowned for their extensive use in traditional medicine due to their abundance of bioactive phytochemicals. Zinc and iron metals possess significant pharmacological effects including antioxidant and anticancer properties. In this study, nanoparticles (NPs) containing zinc and iron were green synthesized utilizing ethanolic and aqueous extracts of CP aerial parts. UV-Vis spectra revealed absorption peaks around 270-275 nm, while FT-IR analysis confirmed successful coating of the NPs with plant's phytochemicals. SEM/EDX analysis indicated a more potent reducing effect of the aqueous extract, whereas the alcoholic extract demonstrated more effective coating of the NPs. DLS showed monodispersed NPs with average sizes of 32.67-202 nm. The alcoholic extract-based zinc and iron NPs exhibited the highest phenolic and flavonoid contents (51.06 ± 2.82 µg of GAE/mg of DW and 66.26 ± 1.12 µg of Qu/mg of DW, respectively) and the strongest antioxidant effect against ABTS and DPPH radicals (IC50 = 52.81 and 148.46 µg/mL, respectively). The aqueous extract-based zinc NPs demonstrated the greatest cytotoxicity against A-431 cell lines (IC50 = 188.97 µg/mL). The findings highlight promising potential of these sustainable materials for therapeutic applications, indicating a need for continued research and development in this area.

Ameliorating arsenic and PVC microplastic stress in barley (Hordeum vulgare L.) using copper oxide nanoparticles: an environmental bioremediation approach

The present study investigates the impact of varying concentrations of PVC microplastics (PVC-MPs) - specifically 0 (no PVC-MPs), 2, and 4 mg L- 1 -alongside different arsenic (As) levels of 0 (no As), 150, and 300 mg kg- 1 in the soil, with the concurrent application of copper oxide-nanoparticles (CuO-NPs) at 0 (no CuO -NPs), 25 and 50 µg mL- 1 to barley (Hordeum vulgare L.) plants. This research primarily aims to assess plant growth and biomass, photosynthetic pigments and gas exchange characteristics, oxidative stress indicators, as well as the response of various antioxidants (both enzymatic and non-enzymatic) and their relevant genes expression, proline metabolism, the AsA-GSH cycle, and cellular fractionation within the plants. The findings showed that increased levels of PVC-MPs and As stress in the soil significantly reduced plant growth and biomass, photosynthetic pigments, and gas exchange characteristics. Additionally, PVC-MPs and As stress increased oxidative stress in the roots and shoots, as evidenced by elevated levels of malondialdehyde (MDA), hydrogen peroxide (H2O2), and electrolyte leakage (EL), which in turn stimulated the production of various enzymatic and non-enzymatic antioxidants, gene expression, and sugar content. Furthermore, a notable increase in proline metabolism, the AsA-GSH cycle, and cellular pigmentation was observed. Conversely, the application of CuO-NPs resulted in a substantial improvement in plant growth and biomass, gas exchange characteristics, and the activity of enzymatic and non-enzymatic antioxidants, along with a reduction in oxidative stress. Additionally, CuO-NPs enhanced cellular fractionation while decreasing proline metabolism and the AsA-GSH cycle in H. vulgare plants. These outcomes provide new insights into sustainable agricultural practices and offer significant potential in addressing the critical challenges of heavy metal contamination in agricultural soils.

Phyto-assisted synthesis of zinc oxide nanoparticles using Bauhinia variegata buds extract and evaluation of their multi-faceted biological potentials

Zinc oxide nanoparticles have wide range biological, biomedical and environmental applications. However, traditional nanofabrication of ZnONPs uses various toxic chemicals and organic solvents which limit their bio-applications. To overcome this hurdle, Bauhinia variegata derived buds extract was utilized to fabricate ZnONPs. The greenly generated ZnONPs were successfully prepared and extensively characterized using different analytical tools and the average crystalline size was calculated as 25.47 nm. Further, bioengineered ZnONPs were explored for multiple biological activities that revealed excellent therapeutic potentials. The antibacterial potential was determined using different bacterial strains. Pseudomonas aeruginosa (MIC: 137.5 µg/mL) was reported to be the most resistant variant while Bacillus subtilis (MIC: 34.38 µg/mL) was observed to be most susceptible bacterial strain. DPPH radical scavenging potential was measured to determine the antioxidant capacity of ZnONPs and the highest scavenging potential was observed as 82% at highest of 300 µg/mL. The fungicidal effect of green ZnONPs in comparison with Amphotericin B was assessed against five selected pathogenic fungal strains. The results revealed, Fusarium solani (MIC: 46.875 µg/mL) was least resistant and Aspergillus flavus (MIC: 187.5 µg/mL) was most resistant in fungicidal examination. Cytotoxicity potential of B.V@ZnONPs was analyzed against newly hatched nauplii of brine shrimps. The results for greenly produced ZnONPs was recorded as 39.78 µg/mL while 3.006 µg/mL was reported for positive control vincristine sulphate. The results confirmed the category of general cytotoxic for greenly synthesized nano sized B.V@ZnONPs.

Phytochemical, In Vitro, In Vivo, and In Silico Research on the Extract of Ajuga chamaepitys (L.) Schreb

The present study focuses on the chemical characterization of a dry extract obtained from the species Ajuga chamaepitys (L.) Schreb, evaluating its antioxidant properties, toxicity, and in silico profile. Quantitative analysis of the dry extract revealed a notable amount of phytochemical compounds: 59.932 ± 21.167 mg rutin equivalents (mg REs)/g dry weight, 45.864 ± 4.434 mg chlorogenic acid equivalents (mg ChAEs)/g dry weight and, respectively, 83.307 ± 3.989 mg tannic acid equivalents (TAEs)/g dry weight. By UHPLC-HRMS/MS, the following were quantified as major compounds: caffeic acid (3253.8 μg/g extract) and kaempherol (3041.5 μg/g extract); more than 11 types of polyphenolic compounds were quantified (genistin 730.2 μg/g extract, naringenin 395 μg/g extract, apigenin 325.7 μg/g extract, galangin 283.3 μg/g extract, ferulic acid 254.3 μg/g extract, p-coumaric acid 198.2 μg/g extract, rutin 110.6 μg/g extract, chrysin 90.22 μg/g extract, syringic acid 84.2 μg/g extract, pinocembrin 32.7 μg/g extract, ellagic acid 18.2 μg/g extract). The antioxidant activity was in accordance with the amount of phytochemical compounds: IC50DPPH = 483.6 ± 41.4 µg/mL, IC50ABTS•+ = 127.4 ± 20.2 µg/mL, and EC50FRAP = 491.6 ± 2 µg/mL. On the larvae of Artemia sp., it was found that the extract has a low cytotoxic action. In silico studies have highlighted the possibility of inhibiting the activity of protein kinases CDK5 and GSK-3b for apigenin, galangin, and kaempferol, with possible utility for treating neurodegenerative pathologies and neuropathic pain. Further studies are warranted to confirm the predicted molecular mechanisms of action and to further investigate the therapeutic potential in animal models of neurological disorders.

Phytogenic nanoparticles: synthesis, characterization, and their roles in physiology and biochemistry of plants

Researchers are swarming to nanotechnology because of its potentially game-changing applications in medicine, pharmaceuticals, and agriculture. This fast-growing, cutting-edge technology is trying different approaches for synthesizing nanoparticles of specific sizes and shapes. Nanoparticles (NPs) have been successfully synthesized using physical and chemical processes; there is an urgent demand to establish environmentally acceptable and sustainable ways for their synthesis. The green approach of nanoparticle synthesis has emerged as a simple, economical, sustainable, and eco-friendly method. In particular, phytoassisted plant extract synthesis is easy, reliable, and expeditious. Diverse phytochemicals present in the extract of various plant organs such as root, leaf, and flower are used as a source of reducing as well as stabilizing agents during production. Green synthesis is based on principles like prevention/minimization of waste, reduction of derivatives/pollution, and the use of safer (or non-toxic) solvent/auxiliaries as well as renewable feedstock. Being free of harsh operating conditions (high temperature and pressure), hazardous chemicals and the addition of external stabilizing or capping agents makes the nanoparticles produced using green synthesis methods particularly desirable. Different metallic nanomaterials are produced using phytoassisted synthesis methods, such as silver, zinc, gold, copper, titanium, magnesium, and silicon. Due to significant differences in physical and chemical properties between nanoparticles and their micro/macro counterparts, their characterization becomes essential. Various microscopic and spectroscopic techniques have been employed for conformational details of nanoparticles, like shape, size, dispersity, homogeneity, surface structure, and inter-particle interactions. UV-visible spectroscopy is used to examine the optical properties of NPs in solution. XRD analysis confirms the purity and phase of NPs and provides information about crystal size and symmetry. AFM, SEM, and TEM are employed for analyzing the morphological structure and particle size of NPs. The nature and kind of functional groups or bioactive compounds that might account for the reduction and stabilization of NPs are detected by FTIR analysis. The elemental composition of synthesized NPs is determined using EDS analysis. Nanoparticles synthesized by green methods have broad applications and serve as antibacterial and antifungal agents. Various metal and metal oxide NPs such as Silver (Ag), copper (Cu), gold (Au), silicon dioxide (SiO2), zinc oxide (ZnO), titanium dioxide (TiO2), copper oxide (CuO), etc. have been proven to have a positive effect on plant growth and development. They play a potentially important role in the germination of seeds, plant growth, flowering, photosynthesis, and plant yield. The present review highlights the pathways of phytosynthesis of nanoparticles, various techniques used for their characterization, and their possible roles in the physiology of plants.

Unveiling the effect of gibberellin-induced iron oxide nanoparticles on bud dormancy release in sweet cherry (Prunus avium L.)

Hydrogen cyanide has been extensively used worldwide for bud dormancy break in fruit trees, consequently enhancing fruit production via expedited cultivation, especially in areas with controlled environments or warmer regions. A novel and safety nanotechnology was developed since the hazard of hydrogen cyanide for the operators and environments, there is an urgent need for the development of novel and safety approaches to replace it to break bud dormancy for fruit trees. In current study, we have systematically explored the potential of iron oxide nanoparticles, specifically α-Fe2O3, to modulate bud dormancy in sweet cherry (Prunus avium). The synthesized iron oxide nanoparticles underwent meticulous characterization and assessment using various techniques, including Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and ultraviolet-visible infrared (UV-Vis) spectroscopy. Remarkably, when applied at a concentration of 10 mg L-1 alongside gibberellin (GA4+7), these iron oxide nanoparticles exhibited a substantial 57% enhancement in bud dormancy release compared to control groups, all achieved within a remarkably short time span of 4 days. Our RNA-seq analyses further unveiled that 2757 genes within the sweet cherry buds were significantly up-regulated when treated with 10 mg L-1 α-Fe2O3 nanoparticles in combination with GA, while 4748 genes related to dormancy regulation were downregulated in comparison to the control. Moreover, we discovered an array of 58 transcription factor families among the crucial differentially expressed genes (DEGs). Through hormonal quantification, we established that the increased bud burst was accompanied by a reduced concentration of abscisic acid (ABA) at 761.3 ng/g fresh weight in the iron oxide treatment group, coupled with higher levels of gibberellins (GAs) in comparison to the control. Comprehensive transcriptomic and metabolomic analyses unveiled significant alterations in hormone contents and gene expression during the bud dormancy-breaking process when α-Fe2O3 nanoparticles were combined with GA. In conclusion, our findings provide valuable insights into the intricate molecular mechanisms underlying the impact of iron oxide nanoparticles on achieving uniform bud dormancy break in sweet cherry trees.

Biofabrication of Acer palmatum-Mediated Multifunctional CuO Nanoparticles for Dye Removal, Antibacterial-Antifungal Activity, and Molecular Docking

Copper oxide nanoparticles (CuONPs) are used in many fields from electronics to medicine due to their multifunctionality, and therefore, their production with environmentally friendly methods is a current issue. In this study, biofabricated CuONPs were obtained by using the leaf extract of Acer palmatum plant originating from the Far East to enlighten the characteristics of the novel nanoparticles differentiating from those existing in the literature. Multifunctional nature of the CuONPs was evaluated by the antibacterial, antifungal, and decolorative applications and also by performing molecular docking analysis. The fabricated CuONPs were characterized using ultraviolet-visible spectroscopy (UV-vis), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and dynamic light scattering (DLS). The absorbance seen at 270 nm in the SPR band obtained by UV-vis spectroscopy proved the presence of CuONPs, while the 602, 560, and 540 cm-1 vibrations obtained in the FT-IR spectroscopy indicated the same result. SEM images proved that the nanoparticles were in spherical form with sizes ranging from 140 to 225 nm. The result of DLS analysis showed that the average particle size was 229 nm in diameter, and CuONPs had monodisperse systems (polydispersity index, 0.184). The dye removal potency of CuONPs was also investigated by using remazol brilliant blue R (RBBR) and napthol blue black (NBB). Decolorizations (74 and 86%) of RBBR and NBB were obtained in 90 min at 50 °C, respectively. The strong antibacterial properties of the synthesized CuONPs were observed on both Gram (-) and Gram (+) bacterial strains by disk diffusion and optical analyses, and their antifungal activity was close to that of Amphotericin B, which was applied as a positive control. Molecular docking analysis was performed with Escherichia coli dihydrofolate reductase and Staphylococcus aureus DNA Gyrase B to analyze the antibacterial mechanisms of CuONP and observed that they exhibit good interactions with their targets with binding energies of -12.562 and -8.797 kcal/mol, respectively. Our findings suggested that CuONPs are crucial in the mechanisms of folate metabolism and DNA replication associated with bacterial proliferation. This work will provide significant guidance for the biofabrication of CuONPs and their medical and industrial applications.

Synthesis of Cu and CuO nanoparticles from e-waste and evaluation of their antibacterial and photocatalytic properties

Waste printed circuit boards (WPCBs) contain a plethora of valuable metals, considered an attractive secondary resource. In the current research, a hydrometallurgical process combined ammonia/ammonium chloride leaching and reduction (using L-ascorbic acid) to recover copper and its oxide (CuO) as nanosized particles from WPCBs was investigated. The results of leaching indicated that 96.7% of copper could be recovered at a temperature of 35 °C for a leaching duration of 2 h with ammonium chloride and ammonia concentration of 2 mol/L at a solid:liquid ratio of 1:10 g/cm3. The synthesized particles exhibit spherical and distorted sphere morphology with average particle size of 460 nm and 50 nm for Cu and CuO NPs, respectively. The antibacterial activity of Cu, CuO, and a (1:1) blend of both (Cu/CuO) has been examined against five different bacterial and fungal strains. The highest zone of inhibition was measured as 21.2 mm for Cu NPs toward Escherichia coli and 16.7 mm for Cu/CuO blend toward Bacillus cereus bacteria. The highest zone of inhibition was measured as 13 mm and 13.8 mm for Cu/CuO blend toward Fusarium proliferatum and Penicillium verrucosum fungi. Cu/CuO blend showed notable photocatalytic activity towards Rhodamine B dye under visible light irradiation with 96% degradation rate within 120 min. Using the process developed in this study, copper and its oxide as nanoparticles can be produced from WPCBs and used for multifunctional applications.

Co-application of copper oxide nanoparticles and Trichoderma harzianum with physiological, enzymatic and ultrastructural responses for the mitigation of salt stress

Chemical contamination or nutrient pollution is concerning for health, environmental, and economic reasons. Ecofriendly surface modification of nanoparticles is a consistent challenge for agricultural purposes. In response to this environmental concern, CuO-NPs synthesized through biological method using green source and characterized for morphological and structural features through SEM (scanning electron microscope) and TEM (transmission electron microscope) spectroscopy. Our research findings illustrate that the presence of salt stress induces a notable decline in both physiological and biochemical parameters within plants. Nevertheless, the utilization of T. harzianum and CuO-NPs exhibited a mitigating effect on the detrimental consequences induced by salt stress in plants. The application of T. harzianum and the simultaneous co-inoculation with CuO-NPs notably enhanced fresh biomass and facilitated vegetative growth in comparison to the control group. Furthermore, the exposure of both T. harzianum inoculum and Copper oxide nanoparticles resulted in a significant reduction of oxidative stresses, including reactive oxygen species (ROS) levels, H₂O₂, and lipid peroxidation (MDA) levels in the above-ground parts of the plant, while also minimizing electrolyte leakage (EL) by reducing root growth. Additionally, the co-inoculation of the endophyte and CuO-NPs led to a significant enhancement in antioxidant enzymatic activities, such as superoxide dismutase (SOD) and chitinase (CAT) activity in the above-ground parts, under salt stress conditions. The inoculum, along with its combination with CuO-NPs, decreased electrolyte conductivity and improved total chlorophyll contents as compared to the control. The combined application of T. harzianum and CuO-NPs improved salt tolerance in A. thaliana plants by triggering salt-associated gene expression. These findings suggest that the application of T. harzianum and CuO-NPs can considerably promote leaf anatomical changes in A. thaliana and have ability to enhance salt tolerance, particularly in saline areas.

α-tocopherol ameliorates copper II oxide nanoparticles-induced cytotoxic, biochemical, apoptotic, and genotoxic damages in the rainbow trout gonad cells-2 (RTG-2) culture

We investigated the effects of α-tocopherol on oxidative stress-caused damage caused by copper II oxide nanoparticles (CuO NPs) on Oncorhynchus mykiss gonadal cells (RTG-2) for 24 and 48 h. α-Tocopherol reversed the cell death and alterations in the expressions of genes such as sod1, gpx1a, gpx4b, and igf2 caused by CuO NPs; it also supported the expressions of cat, igf1, and gapdh genes caused by CuO NPs for 24 h and promoted alterations in the expressions of the sod2, gh1, and igf1 genes for 48 h. Additionally, α-tocopherol reversed the caspase 3/7 activity increased by CuO NPs for 24 h and supported it's decrease for 48 h. α-Tocopherol supported the increase in tail DNA (%) affected by CuO NPs for 24 h and reversed it for 48 h. Therefore, α-tocopherol may have the potential to protect against cellular alterations induced by CuO NPs in a time-dependent manner.

Antibacterial and Cytotoxic Effects of Biosynthesized Zinc Oxide and Titanium Dioxide Nanoparticles

Nanotechnology is a rapidly developing field of research that studies materials having dimensions of less than 100 nanometers. It is applicable in many areas of life sciences and medicine including skin care and personal hygiene, as these materials are the essential components of various cosmetics and sunscreens. The aim of the present study was to synthesize Zinc oxide (ZnO) and Titanium dioxide (TiO₂) nanoparticles (NPs) by using Calotropis procera (C. procera) leaf extract. Green synthesized NPs were characterized by UV spectroscopy, Fourier transform infrared (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) to investigate their structure, size, and physical properties. The antibacterial and synergistic effects of ZnO and TiO₂ NPs along with antibiotics were also observed against bacterial isolates. The antioxidant activity of synthesized NPs was analyzed by their α-diphenyl-β-picrylhydrazyl (DPPH) radical scavenging activity. In vivo toxic effects of the synthesized NPs were evaluated in albino mice at different doses (100, 200, and 300 mg/kg body weight) of ZnO and TiO₂ NPs administered orally for 7, 14, and 21 days. The antibacterial results showed that the zone of inhibition (ZOI) was increased in a concentration-dependent manner. Among the bacterial strains, Staphylococcus aureus showed the highest ZOI, i.e., 17 and 14 mm against ZnO and TiO₂ NPs, respectively, while Escherichia coli showed the lowest ZOI, i.e., 12 and 10 mm, respectively. Therefore, ZnO NPs are potent antibacterial agents compared to TiO₂ NPs. Both NPs showed synergistic effects with antibiotics (ciprofloxacin and imipenem). Moreover, the DPPH activity showed that ZnO and TiO₂ NPs have significantly (p > 0.05) higher antioxidant activity, i.e., 53% and 58.7%, respectively, which indicated that TiO₂ has good antioxidant potential compared to ZnO NPs. However, the histological changes after exposure to different doses of ZnO and TiO₂ NPs showed toxicity-related changes in the structure of the kidney compared to the control group. The current study provided valuable information about the antibacterial, antioxidant, and toxicity impacts of green synthesized ZnO and TiO₂ NPs, which can be influential in the further study of their eco-toxicological effects.

Fabrication and Characterization of Ag-Graphene Nanocomposites and Investigation of Their Cytotoxic, Antifungal and Photocatalytic Potential

In the present study, we aimed to synthesize (Ag)_1-x(GNPs)_x nanocomposites in variable ratios (25% GNPs-Ag, 50% GNPs-Ag, and 75% GNPs-Ag) via an ex situ approach to investigate the incremental effects of GNPs (graphene nanoparticles) on AgNPs (silver nanoparticles). The prepared nanocomposites were successfully characterized using different microscopic and spectroscopic techniques, including X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, ultraviolet spectroscopy, and Raman spectroscopic analysis. For the evaluation of morphological aspects, shape, and percentage elemental composition, SEM and EDX analyses were employed. The bioactivities of the synthesized nanocomposites were briefly investigated. The antifungal activity of (Ag)_1-x(GNPs)_x nanocomposites was reported to be 25% for AgNPs and 66.25% using 50% GNPs-Ag against Alternaria alternata. The synthesized nanocomposites were further evaluated for cytotoxic potential against U87 cancer cell lines with improved results (for pure AgNPs IC₅₀: ~150 µg/mL, for 50% GNPs-Ag IC₅₀: ~12.5 µg/mL). The photocatalytic properties of the nanocomposites were determined against the toxic dye Congo red, and the percentage degradation was recorded as 38.35% for AgNPs and 98.7% for 50% GNPs-Ag. Hence, from the results, it is concluded that silver nanoparticles with carbon derivatives (graphene) have strong anticancer and antifungal properties. Dye degradation strongly confirmed the photocatalytic potential of Ag-graphene nanocomposites in the removal of toxicity present in organic water pollutants.

Environmental sustainable: Biogenic copper oxide nanoparticles as nano-pesticides for investigating bioactivities against phytopathogens

Endocrine-disrupting chemicals (EDCs) are of interest in human physiopathology and have been extensively studied for their effects on the endocrine system. Research also focuses on the environmental impact of EDCs, including pesticides and engineered nanoparticles, and their toxicity to organisms. Green nanofabrication has surfaced as an environmentally conscious and sustainable approach to manufacture antimicrobial agents that can effectively manage phytopathogens. In this study, we examined the current understanding of the pathogenic activities of Azadirachta indica aqueous formulated green synthesized copper oxide nanoparticles (CuONPs) against phytopathogens. The CuONPs were analyzed and studied using a range of analytical and microscopic techniques, such as UV-visible spectrophotometer, Transmission electron microscope (TEM), Scanning electron microscope (SEM), X-ray diffraction (XRD) and Fourier transformed infrared spectroscopy (FTIR). The XRD spectral results revealed that the particles had a high crystal size, with an average size ranging from 40 to 100 nm. TEM and SEM images were utilized to verify the size and shape of the CuONPs, revealing that they varied between 20 and 80 nm. The existence of potential functional molecules involved in the reduction of the nanoparticles was confirmed by FTIR spectra and UV analysis. Biogenically synthesized CuONPs revealed significantly enhanced antimicrobial activities at 100 mg/L concentration in vitro by the biological method. The synthesized CuONPs at 500 μg/ml had a strong antioxidant activity which was examined through the free radicle scavenging method. Overall results of the green synthesized CuONPs have demonstrated significant synergetic effects in biological activities which can play a crucial impact in plant pathology against numerous phytopathogens.

Biogenic Synthesis of Multifunctional Silver Oxide Nanoparticles (Ag2ONPs) Using Parieteria alsinaefolia Delile Aqueous Extract and Assessment of Their Diverse Biological Applications

Green nanotechnology has made the synthesis of nanoparticles a possible approach. Nanotechnology has a significant impact on several scientific domains and has diverse applications in different commercial areas. The current study aimed to develop a novel and green approach for the biosynthesis of silver oxide nanoparticles (Ag₂ONPs) utilizing Parieteria alsinaefolia leaves extract as a reducing, stabilizing and capping agent. The change in color of the reaction mixture from light brown to reddish black determines the synthesis of Ag₂ONPs. Further, different techniques were used to confirm the synthesis of Ag₂ONPs, including UV-Visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), Energy-dispersive X-ray spectroscopy (EDX), zeta potential and dynamic light scattering (DLS) analyses. The Scherrer equation determined a mean crystallite size of ~22.23 nm for Ag₂ONPs. Additionally, different in vitro biological activities have been investigated and determined significant therapeutic potentials. Radical scavenging DPPH assay (79.4%), reducing power assay (62.68 ± 1.77%) and total antioxidant capacity (87.5 ± 4.8%) were evaluated to assess the antioxidative potential of Ag₂ONPs. The disc diffusion method was adopted to evaluate the antibacterial and antifungal potentials of Ag₂ONPs using different concentrations (125-1000 μg/mL). Moreover, the brine shrimp cytotoxicity assay was investigated and the LC₅₀ value was calculated as 2.21 μg/mL. The biocompatibility assay using red blood cells (<200 μg/mL) confirmed the biosafe and biocompatible nature of Ag₂ONPs. Alpha-amylase inhibition assay was performed and reported 66% inhibition. In conclusion, currently synthesized Ag₂ONPs have exhibited strong biological potential and proved as an attractive eco-friendly candidate. In the future, this preliminary research work will be a helpful source and will open new avenues in diverse fields, including the pharmaceutical, biomedical and pharmacological sectors.

Biogenic synthesis, molecular docking, biomedical and environmental applications of multifunctional CuO nanoparticles mediated Phragmites australis

The demand for metal nanoparticles is increasing with the widening application areas while causing environmental impact including pollution, toxic byproduct generation and depletion of natural resources. Incorporating natural materials in nanoparticle synthesis can contribute toward environmental sustainability. This paper is concerned with the biogenic synthesis of copper oxide nanoparticles (CuONPs) mediated by the plant species Phragmites australis. UV-vis, FT-IR, TEM and SEM studies were used to characterize the obtained CuONPs. The synthesized nanoparticles' antibacterial efficacy against Escherichia coli and Staphylococcus aureus was assessed. The CuONPs' reducing power, total phenolic component content, and flavonoid content were all calculated. Additionally, the dye removal abilities of copper oxide nanoparticles using Brilliant Blue R-250 were studied. The CuONP synthesis was assessed morphological by change of color and in the UV-vis analysis by the SPR band around 320 and 360 nm. FT-IR was used to monitor the functional groups present in the synthesized CuONPs. The obtained CuONPs were spherical and between 70 and 142 nm in size, according to the SEM data and TEM analyses were in accordance with SEM results. Using disk diffusion, the CuONPs demonstrated substantial antibacterial efficacy against S. aureus and E. coli, with inhibition zones of 18.5 ± 0.8 and 12.7 ± 0.6 mm, respectively. The MBC and MIC values were 62.5 μg/mL against S. aureus and 125 μg/mL against E. coli. The antioxidant abilities of P. australis and CuONPs were also confirmed. The CuONP solution's total phenolic substance content was 9.44 μg of pyrocathecol equivalent per milligram of nanoparticle, and its total flavonoid content was 16.24 μg of catechin equivalent per milligram of nanoparticle. Additionally, the synthesized CuONPs were found to be well effective on industrial dye removal by demonstrating high decolorization of 98 %. Also, the antibacterial activity of CuONPs was investigated through the interactions with S. aureus FtsZ, dihydropteroate synthase and thymidylate kinase. In silico molecular docking analysis was applied in the confirmation of the binding sites and interactions of active sites. CuONP showed -9.067, -8,048, and -7.349 kcal/mol of binding energies in molecular docking analysis of FtsZ, dihydropteroate synthase and thymidylate kinase proteins respectively. The results of this study suggested the antimicrobial, antioxidant and decolorative effect of synthesized CuONPs that can be apply in multiple areas of R&D and industry.

Oscillatoria limnetica Mediated Green Synthesis of Iron Oxide (Fe2O3) Nanoparticles and Their Diverse In Vitro Bioactivities

Iron oxide nanoparticles (Fe₂O₃-NPs) were synthesized using Oscillatoria limnetica extract as strong reducing and capping agents. The synthesized iron oxide nanoparticles IONPs were characterized by UV-visible spectroscopy, Fourier transform infrared (FTIR), X-ray diffractive analysis (XRD), scanning electron microscope (SEM), and Energy dispersive X-ray spectroscopy (EDX). IONPs synthesis was confirmed by UV-visible spectroscopy by observing the peak at 471 nm. Furthermore, different in vitro biological assays, which showed important therapeutic potentials, were performed. Antimicrobial assay of biosynthesized IONPs was performed against four different Gram-positive and Gram-negative bacterial strains. E. coli was found to be the least suspected strain (MIC: 35 µg/mL), and B. subtilis was found to be the most suspected strain (MIC: 14 µg/mL). The maximum antifungal assay was observed for Aspergillus versicolor (MIC: 27 µg mL). The cytotoxic assay of IONPs was also studied using a brine shrimp cytotoxicity assay, and LD₅₀ value was reported as 47 µg/mL. In toxicological evaluation, IONPs was found to be biologically compatible to human RBCs (IC₅₀: >200 µg/mL). The antioxidant assay, DPPH 2,2-diphenyl-1-picrylhydrazyly was recorded at 73% for IONPs. In conclusion, IONPs revealed great biological potential and can be further recommended for in vitro and in vivo therapeutic purposes.

In Vitro Acaricidal Activity of Silver Nanoparticles (AgNPs) against the Poultry Red Mite (Dermanyssus gallinae)

Dermanyssus gallinae (PRM) is the most common blood-sucking ectoparasite in laying hens and is resistant against numerous acaricides. Silver nanoparticles (AgNPs) represent an innovative solution against PRM. The current study aimed to assess the in vitro acaricidal activity of AgNPs against PRM and describe their potential mechanism of action. Nanoparticles were produced using a wet chemistry approach. Mites were collected using AviVet traps from 18 poultry farms in Greece. Contact toxicity bioassays were carried out for 24 h with negative controls, 20, 40, 60, or 80 ppm AgNPs. Analysis of variance was used to compare the mortality rates of PRM between the control and treatment groups, while LC₅₀, LC₉₀, and LC₉₉ values were estimated using probit regression analysis for the total farms jointly and separately. Nanoparticles displayed strong acaricidal activity, and mortality rates were significantly different between groups and increased by AgNPs concentration. Overall mean LC₅₀, LC₉₀, and LC₉₉ values were 26.5, 58.8, and 112.3 ppm, respectively. Scanning electron microscopy on mites treated with 80 ppm AgNPs revealed cracks in their exoskeleton and limb detachments, presumably resulting from the interaction between AgNPs and the mites' chitin. Future studies should focus on assessing AgNPs residues in chicken tissues before moving into field trials.

Green synthesis of copper oxide nanoparticles using Ephedra Alata plant extract and a study of their antifungal, antibacterial activity and photocatalytic performance under sunlight

In the present work, copper oxide (CuO NPs) was synthesized by an eco-friendly, simple, low-cost, and economical synthesis method using Ephedra Alata aqueous plant extract as a reducing and capping agent. The biosynthesized CuO-NPs were compared with chemically obtained CuO-NPs to investigate the effect of the preparation method on the structural, optical, morphological, antibacterial, antifungal, and photocatalytic properties under solar irradiation. The CuO NPs were characterized using X-ray diffraction (XRD), UV-VIS spectroscopy, Fourier transform infrared spectrometer (FTIR) analysis, and field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FESEM-EDX). The photocatalytic activities of biosynthetic CuO-NPs and chemically prepared CuO-NPs were studied using methylene blue upon exposure to solar irradiation. The results showed that the biosynthesized CuO photocatalyst was more efficient than the chemically synthesized CuO-NPs for Methylene Blue (MB) degradation under solar irradiation, with MB degradation rates of 93.4% and 80.2%, respectively. In addition, antibacterial and antifungal activities were evaluated. The disk diffusion technique was used to test the biosynthesized CuO-NPs against gram-negative bacteria, Staphylococcus aureus and Bacillus subtilis, as well as C. Albicans and S. cerevisiae. The biosynthesized CuO-NPs showed efficient antibacterial and antifungal activity. The obtained results revealed that the biosynthesized CuO-NPs can play a vital role in the destruction of pathogenic bacteria, the degradation of dyes, and the activity of antifungal agents in the bioremediation of industrial and domestic waste.

Synthesis, biomedical applications, and toxicity of CuO nanoparticles

Versatile nature of copper oxide nanoparticles (CuO NPs) has made them an imperative nanomaterial being employed in nanomedicine. Various physical, chemical, and biological methodologies are in use for the preparation of CuO NPs. The physicochemical and biological properties of CuO NPs are primarily affected by their method of fabrication; therefore, selectivity of a synthetic technique is immensely important that makes these NPs appropriate for a specific biomedical application. The deliberate use of CuO NPs in biomedicine questions their biocompatible nature. For this reason, the present review has been designed to focus on the approaches employed for the synthesis of CuO NPs; their biomedical applications highlighting antimicrobial, anticancer, and antioxidant studies; and most importantly, the in vitro and in vivo toxicity associated with these NPs. This comprehensive overview of CuO NPs is unique and novel as it emphasizes on biomedical applications of CuO NPs along with its toxicological assessments which would be useful in providing core knowledge to researchers working in these domains for planning and conducting futuristic studies. KEY POINTS: • The recent methods for fabrication of CuO nanoparticles have been discussed with emphasis on green synthesis methods for different biomedical approaches. • Antibacterial, antioxidant, anticancer, antiparasitic, antidiabetic, and antiviral properties of CuO nanoparticles have been explained. • In vitro and in vivo toxicological studies of CuO nanoparticles exploited along with their respective mechanisms.

A green and environmental sustainable approach to synthesis the Mn oxide nanomaterial from Punica granatum leaf extracts and its in vitro biological applications

Pathogenic fungal infections in fruit cause economic losses and have deleterious effects on human health globally. Despite the low pH and high water contents of vegetables and fresh, ripened fruits, they are prone to fungal and bacterial diseases. The ever-increasing resistance of phytopathogens toward pesticides, fungicides and bactericides has resulted in substantial threats to plant growth and production in recent years. However, plant-mediated nanoparticles are useful tools for combating parasitic fungi and bacteria. Herein, we synthesized biogenic manganese oxide nanoparticles (MnONPs) from an extract of Punica granatum (P. granatum), and these nanoparticles showed significant antifungal and antibacterial activities. The production of MnONPs from plant extracts was confirmed by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV visible spectroscopy (UV). The surface morphology and shape of the nanoparticles were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Using a detached fruit method, the MnONPs were shown to exhibit significant antimicrobial activities against two bacterial strains, E. coli and S. aureus, and against the fungal species P. digitatum. The results revealed that the MnONPs had a minimum antimicrobial activity at 25 µg/mL and a maximum antimicrobial activity at 100 µg/mL against bacterial strains in lemon (citrus). Furthermore, the MnONPs exhibited significant ROS scavenging activity. Finally, inconclusive results from the green-synthesized MnONPs magnified their significant synergetic effects on the shelf life of tomatoes (Lycopercicum esculantum) and indicated that they could be used to counteract the phytopathological effects of postharvest fungal diseases in fruits and vegetables. Overall, this method of MnONPs synthesis is inexpensive, rapid and ecofriendly. MnONPs can be used as potential antimicrobial agents against different microbial species.

Dispersion and Aggregation Fate of Individual and Co-Existing Metal Nanoparticles under Environmental Aqueous Suspension Conditions

The use of diverse metal nanoparticles (MNPs) in a wide range of commercial products has led to their co-existence in the aqueous environment. The current study explores the dispersion and aggregation fate of five prominent MNPs (silver, copper, iron, nickel, and titanium), in both their individual and co-existing forms. We address a knowledge gap regarding their environmental fate under turbulent condition akin to flowing rivers. We present tandem analytical techniques based on dynamic light scattering, ultraviolet-visible spectroscopy, and inductively coupled plasma atomic emission spectroscopy for discerning their dispersion behavior under residence times of turbulence, ranging from 0.25 to 4 h. The MNPs displayed a multimodal trend for dispersion and aggregation behavior with suspension time in aqueous samples. The extent of dispersion was variable and depended upon intrinsic properties of MNPs. However, the co-existing MNPs displayed a dominant hetero-aggregation effect, independent of the residence times. Further research with use of real-world environmental samples can provide additional insights on the effects of sample chemistry on MNPs fate.

Green Nanotechnology: Recent Research on Bioresource-Based Nanoparticle Synthesis and Applications

In the last decades, the idea of green nanotechnology has been expanding, and researchers are developing greener and more sustainable techniques for synthesizing nanoparticles (NPs). The major objectives are to fabricate NPs using simple, sustainable, and cost-effective procedures while avoiding the use of hazardous materials that are usually utilized as reducing or capping agents. Many biosources, including plants, bacteria, fungus, yeasts, and algae, have been used to fabricate NPs of various shapes and sizes. The authors of this study emphasized the most current studies for fabricating NPs from biosources and their applications in a wide range of fields. This review addressed studies that cover green techniques for synthesizing nanoparticles of Ag, Au, ZnO, CuO, Co3O4, Fe3O4, TiO2, NiO, Al2O3, Cr2O3, Sm2O3, CeO2, La2O3, and Y2O3. Also, their applications were taken under consideration and discussed.

Activated Carbon-Loaded Titanium Dioxide Nanoparticles and Their Photocatalytic and Antibacterial Investigations

Activated carbon doping TiO2 nanoparticles were synthesised by zapota leaf extract using the co-precipitation method. The bio-constituents of plant compounds were used in the reactions of stabilization and reductions. The carbon loading on the TiO2 nanoparticles was characterised by XRD, FTIR, UV-DRS, SEM with EDX, and TEM analysis. The loading of activated carbon onto the TiO2 nanoparticles decreased the crystallite size and optical bandgap, and their doping improved the surface structure of AC/TiO2 nanoparticles. Mesoporous/microporous instability was remodified from the activated carbon, which was visualised using SEM and TEM analysis, respectively. The photocatalytic dye degradation of Rh-B dye was degraded in TiO2 and AC/TiO2 nanoparticles under visible light irradiation. The degradation efficiencies of TiO2 and AC/TiO2 nanoparticles were 73% and 91%, respectively. The bacterial abilities of TiO2 and AC/TiO2 nanoparticles were examined by E. coli and S. aureus. The water reclamation efficiency and bactericidal effect of TiO2 and AC/TiO2 nanoparticles were examined via catalytic dye degradation and bacterial efficiency of activated carbon-doped titanium dioxide nanoparticles.

Nickel oxide nanoparticles synthesis using plant extract and evaluation of their antibacterial effects on Streptococcus mutans

Dental decay is known in the world as the most common human infectious disease. Ascending process of dental caries index in the world shows the failure of oral disease prevention. Streptococcus mutans bacteria cause acid damage and tooth decay by producing acid over time. Nanomaterials with suitable functionality, high permeability, extremely large surface area, significant reactivity, unique mechanical features, and non-bacterial resistance can be considered as promising agents for antimicrobial and antiviral applications. In this study, nickel oxide (NiO) nanoparticles with size range from 2 to 16 nm containing Stevia natural sweetener were eco-friendly synthesized via a simple method. Additionally, their various concentrations were evaluated on S. mutans bacteria by applying the broth dilution method. The results demonstrated that these spherical NiO nanoparticles had efficient bacteriostatic activity on this gram-positive coccus.

The exploration of bio-inspired copper oxide nanoparticles: synthesis, characterization and in-vitro biological investigations

The paper describes the synthesis and characterization of copper oxide nanoparticles (CuO NPs) using the mixture of plant rhizome extracts Ocimum sanctum and Saussurea lappa as a reducing agent. The prepared CuO nanoparticles are characterized and confirmed their formation based on data obtained from powder X-ray diffraction spectroscopy, Fourier Transmission Infrared, Ultraviolet-Visible spectra, Field Emission Scanning Electron Microscopy images, Energy Dispersive X-ray analysis and Dynamic light scattering techniques and data reveal that the average size of CuO Nps was 103.4 nm. The result of antibacterial and antifungal activities for concentrations 50, 100, and 170 ppm indicate that NPs may exhibit appreciable activity at higher (170 ppm) concentrations. The MTT cytotoxic assay studies of Chinese Hamster Ovary (CHO) cell lines showed a Half-maximal inhibitory concentration (IC₅₀) value of 4.14 ​μg/mL.