Atomic force microscopy of 3T3 and SW-13 cell lines: An investigation of cell elasticity changes due to fixation

Reciprocal folding dynamics in cellular networks at the stroma-basement membrane interface

Epithelium layer stands on a membrane, called basement membrane (BM) which serves as a boundary with the underlying stroma. While most studies on morphogenesis have focused on the epithelium-BM complex, the role of the BM-stroma interface remains poorly understood. In this study, we demonstrate how forces originating from the stromal layer contribute to tissue morphogenesis. Folds focalization at the BM-stroma interface is driven by mechanical instability, which arises from the fluidity of the stroma and the polarized tractional forces acting on the rigid membrane of stromal cell condensates. Stromal cells move towards the folded region by topographic guidance, while the concentration of forces intensifies. Through this process, stromal cells and folds engage in recursive interactions, resulting in the formation of a cellular network. Our observation provides a rational mechanism for pattern formation in a multi-layered living tissue. STATEMENT OF SIGNIFICANCE: This study addresses a crucial gap in understanding how stromal cells interact with the basement membrane to lead tissue surface morphogenesis. By developing a collagen-based, nanometer-thick engineered basement membrane, we demonstrate that the stromal cells exert traction forces on the basement membrane to fold. The folding process guides stromal cell migration, which in turn induces further folding in a recursive manner. The direction of folding, invagination or evagination, is determined by the stiffness difference between the stroma and the basement membrane. This model offers better understanding about how the basement membrane interacts with stromal cells to make evaginated network structures on tissue surface.

Detection and Characterization of Multidimensional Information of Adipocyte Model Based on AFM-Raman

Excessive accumulation of white adipose tissue leads to metabolic disorders, and the excessive differentiation of preadipocytes into white adipocytes is one of the contributing factors to obesity. The browning of white adipocytes has been regarded as a promising therapeutic strategy. To analyze the origins and potential solutions for obesity from a fundamental perspective, we employed atomic force microscopy, and Raman confocal microscopy to investigate and characterize multidimensional information regarding the differentiation process of 3 T3-L1 preadipocyte models into white adipocytes and their subsequent browning into beige adipocytes. The results from atomic force microscopy indicated that during the differentiation of preadipocytes into mature white adipocytes, there was an increase in cell height, a decrease in length, and a transformation in shape from fibroblast-like morphology to spherical form. Additionally, Young's modulus, stiffness, and adhesion decreased throughout this process. Following browning, cells maintained their spherical shape but exhibited reduced height compared to white adipocytes; lipid droplet decomposition resulted in increased surface roughness. Raman spectroscopy studies revealed that preadipocytes lacked specific lipid peaks; however, as they differentiated into white adipocytes, peak Raman signals transitioned from weak to sharp. After browning occurred, lipid peak signals became sparse and dispersed. Furthermore, by calibrating temperature standard curves based on water molecule hydrogen-oxygen stretching bands, it was found that beige adipocytes possess thermogenic capabilities. Based on Segment Anything Model for lipid droplet segmentation and color clustering 3D K-Means point cloud analysis: White adipocyte lipid droplets aggregated with deeper coloration post-staining appearing duller; conversely, beige adipocyte coloration appeared lighter and brighter with more clusters present within the clustering point cloud. In summary, this study provides a novel method for multidimensional detection and characterization through an interdisciplinary approach combining cellular biology with physical chemistry.

Cell elasticity measurement and sorting based on microfluidic techniques: Advances and applications

Cell elasticity serves as a crucial physical biomarker that reflects changes in cellular structures and physiological states, providing key insights into cell behaviors. It links mechanical properties to biological function, highlighting its importance for understanding cell health and advancing biomedical research. Microfluidic technologies, with their capabilities for precise manipulation and high-throughput analysis, have significantly advanced the measurement of cell elasticity and elasticity-based cell sorting. This paper presents a comprehensive overview of advanced microsystems for assessing cell elasticity, discussing their advantages and limitations. The biomedical applications of elasticity-based sorting are highlighted, including cell classification, clinical diagnosis, drug screening, and stem cell differentiation prediction. The paper addresses the current challenges in the field, such as limited measurement efficiency and scalability, and explores future research directions, including the development of automated, high-throughput systems and the integration of elasticity measurements into practical biomedical applications. These advancements aim to deepen our understanding of cellular mechanics, improve diagnostic precision, and foster the development of novel therapeutic strategies. Ultimately, this work emphasizes the potential of cell elasticity as a key parameter in advancing disease diagnosis and therapeutic research.

The mechanical properties measurement could be affected by forceps: a technical note on sampling human annulus fibrosus

PURPOSE

To compare the mechanical properties of human annulus fibrosus obtained by forceps versus bistoury and observe whether the measurement could be affected by forceps sampling method.

METHODS

In this study, the mechanical properties of the the extracellular matrix (ECM) of human annulus fibrosus, including elastic modulus and stiffness, were investigated using atomic force microscope (AFM). Tissue was obtained from patients during operation using a bistoury or nucleus pulposus forceps. Tissues obtained with the nucleus pulposus forceps were considered as the forceps group and those obtained with a bistoury were considered as the bistoury group.

RESULTS

There was no significant difference observed between the forceps and bistoury group according to histological staining. The elastic modulus of the forceps group was 0.41 ± 0.08 MPa, and that of bistoury group was 0.53 ± 0.13 MPa, and the difference between the two groups was statistically significant (p < 0.05). The stiffness of the forceps group was 0.024 ± 0.003 N/m, and that of the bistoury group was 0.037 ± 0.003 N/m, and the difference between the two groups was statistically significant (p < 0.05).

CONCLUSION

The results indicate that the forceps sampling method has a substantial negative effect on the micromechanical properties of the ECM of the annulus fibrosus. Bistoury sampling method is recommended as the experimental subject for exploring the micromechanics mechanisms of cervical degenerative disease.

Mechanical characterization of Xenopus laevis oocytes using atomic force microscopy

Mechanical properties are essential for the biological activities of cells, and they have been shown to be affected by diseases. Therefore, accurate mechanical characterization is important for studying the cell lifecycle, cell-cell interactions, and disease diagnosis. While the cytoskeleton and actin cortex are typically the primary structural stiffness contributors in most live cells, oocytes possess an additional extracellular layer known as the vitelline membrane (VM), or envelope, which can significantly impact their overall mechanical properties. In this study, we utilized nanoindentation via an atomic force microscope to measure the Young's modulus of Xenopus laevis oocytes at different force setpoints and explored the influence of the VM by conducting measurements on oocytes with the membrane removed. The findings revealed that the removal of VM led to a significant decrease in the apparent Young's modulus of the oocytes, highlighting the pivotal role of the VM as the main structural component responsible for the oocyte's shape and stiffness. Furthermore, the mechanical behavior of VM was investigated through finite element (FE) simulations of the nanoindentation process. FE simulations with the VM Young's modulus in the range 20-60 MPa resulted in force-displacement curves that closely resemble experimental in terms of shape and maximum force for a given indentation depth.

Experimental extraction of Young's modulus of gastric tissue with development of spherical, cylindrical, and crowned rollers contact theories

Nanotechnology has been considered with the aim of recognizing the structural and mechanical properties as well as improving the treatment and diagnostic process in the field of medicine. The process of nanomanipulation by examining healthy and cancerous tissues in nanoscale is one of the processes used in this field. Therefore, in this article, considering the importance of recognizing the properties of cancerous and healthy tissues in improving the treatment and diagnosis process, one of the most common types of cancer has been studied. Young modulus has been used as a parameter in the diagnosis of cancerous tissue and its value has been calculated for gastric cancerous tissue. To achieve this goal, atomic force microscopy (AFM) was used during the manipulation process. This tool with the ability to study cancerous tissues in different environments and with the least amount of damage to the target tissue, is one of the effective tools in the field of nanomanipulation. The parameter studied in this study is the geometry of gastric cancer tissue. Therefore, the simulations have been performed by considering contact models with spherical, cylindrical and crowned rollers geometries. The force-indentation depth diagram for gastric tissue is plotted experimentally and compared with theoretical results. According to the experimental work done after reviewing the recorded topographic images, the approximate range of the Young's modulus value for gastric tissue has been calculated according to different geometries. Since the geometry of the crowned rollers is closer to the geometry of the gastric tissue, it has a higher accuracy and the values of the Young's modulus have been calculated according to this geometry in the range of 316-310 KPa.

Ligand Binding-Induced Cellular Membrane Deformation is Correlated with the Changes in Membrane Stiffness

Study interaction between ligands and protein receptors is a key step for biomarker research and drug discovery. In situ measurement of cell surface membrane protein binding on whole cells eliminates the cost and pitfalls associated with membrane protein purification. Ligand binding to membrane protein was recently found to induce nanometer-scale cell membrane deformations, which can be monitored with real-time optical imaging to quantify ligand/protein binding kinetics. However, the insight into this phenomenon has still not been fully understood. We hypothesize that ligand binding can change membrane stiffness, which induces membrane deformation. To investigate this, cell height and membrane stiffness changes upon ligand binding are measured using atomic force microscopy (AFM). Wheat germ agglutinin (WGA) is used as a model ligand that binds to the cell surface glycoprotein. The changes in cell membrane stiffness and cell height upon ligand bindings are determined for three different cell lines (human A431, HeLa, and rat RBL-2H3) on two different substrates. AFM results show that cells become stiffer with increased height after WGA modification for all cases studied. The increase in cell membrane stiffness is further confirmed by plasmonic scattering microscopy, which shows an increased cell spring constant upon WGA binding. Therefore, this study provides direct experimental evidence that the membrane stiffness changes are directly correlated with ligand binding-induced cell membrane deformation.

BRAF increases endothelial cell stiffness through reorganization of the actin cytoskeleton

The dynamics of the actin cytoskeleton and its connection to endothelial cell-cell junctions determine the barrier function of endothelial cells. The proper regulation of barrier opening/closing is necessary for the normal function of vessels, and its dysregulation can result in chronic and acute inflammation leading to edema formation. By using atomic force microscopy, we show here that thrombin-induced permeability of human umbilical vein endothelial cells, associated with actin stress fiber formation, stiffens the cell center. The depletion of the MEK/ERK kinase BRAF reduces thrombin-induced permeability prevents stress fiber formation and cell stiffening. The peripheral actin ring becomes stabilized by phosphorylated myosin light chain, while cofilin is excluded from the cell periphery. All these changes can be reverted by the inhibition of ROCK, but not of the MEK/ERK module. We propose that the balance between the binding of cofilin and myosin to F-actin in the cell periphery, which is regulated by the activity of ROCK, determines the local dynamics of actin reorganization, ultimately driving or preventing stress fiber formation.

Effect of mechanical properties of Jurkat cell on adhesion properties of Jurkat integrin and VCAM-1: An AFM study

Mechanical properties play key roles in the immune system, especially the activation, transformation and subsequent effector responses of immune cells. As transmembrane adhesion receptors, integrins mediate the adhesion events of both cells and cell-extracellular matrix (ECM). Integrin affinity would influence the crosslinking of cytoskeleton, leading to the change of elastic properties of cells. In this study, the cells were treated with F-actin destabilizing agent Cytochalasin-D (Cyt-D), fixed by Glutaraldehyde, and cultivated in hypotonic solution respectively. We used Atomic force microscopy (AFM) to quantitatively measure the elasticity of Jurkat cells and adhesion properties between integrins and vascular cell adhesion molecule-1 (VCAM-1), and immunofluorescence to study the alteration of cytoskeleton. Glutaraldehyde had a positive effect on the adhesion force and Young's modulus. However, these mechanical properties decreased in a hypotonic environment, confirming the findings of cellular physiological structure. There was no significant difference in the bond strength and elasticity of Jurkat cells treated with Cytochalasin-D, probably because of lower importance of actin in suspension cells. All the treatments in this study pose a negative effect on the adhesion probability between integrins and VCAM-1, which demonstrates the effect of structural alteration of the cytoskeleton on the conformation of integrin. Clear consistency between adhesion force of integrin/VCAM-1 bond and Young's modulus of Jurkat cells was shown. Our results further demonstrated the relationship between cytoskeleton and integrin-ligand by mechanical characteristics.

Chemical fixation creates nanoscale clusters on the cell surface by aggregating membrane proteins

Chemical fixations have been thought to preserve the structures of the cells or tissues. However, given that the fixatives create crosslinks or aggregate proteins, there is a possibility that these fixatives create nanoscale artefacts by aggregation of membrane proteins which move around freely to some extent on the cell surface. Despite this, little research has been conducted about this problem, probably because there has been no method for observing cell surface structures at the nanoscale. In this study, we have developed a method to observe cell surfaces stably and with high resolution using atomic force microscopy and a microporous silicon nitride membrane. We demonstrate that the size of the protrusions on the cell surface is increased after treatment with three commonly used fixatives and show that these protrusions were created by the aggregation of membrane proteins by fixatives. These results call attention when observing fixed cell surfaces at the nanoscale.

Atomic force microscopy imaging shows that cell fixation can lead to unwanted aggregation of membrane proteins.

Cell-stiffness and morphological architectural patterns in clinical samples of high grade serous ovarian cancers

High grade serous ovarian carcinoma (HGSOC) is recognized as the most frequent type of ovarian cancer and the main cause of ovarian cancer related deaths worldwide. Although homologous recombination deficiency testing has been adopted in the clinical workflow, morphological analysis remains the main diagnostic tool. In this study Atomic Force Microscopy (AFM) was tested in standard hematoxylin and eosin (H&E) stained sections to investigate the biomechanical properties of different architectural growing patterns of HGSOC. Our results showed that AFM was able to discriminate HGSOC morphological growing patterns as well as patients' stage. Micropapillary pattern, which has been associated to poor outcome, had lower Young's moduli. In addition stage IV HGSOC was significantly softer than stage III cancers. Based on our results, AFM analysis could represent an additional tool in HGSOC morphological diagnosis as the biomechanical proprieties of HGSOC were quantitatively associated to tumor staging and architectural pattern.

Cell mechanical properties of human breast carcinoma cells depend on temperature

The knowledge of cell mechanics is required to understand cellular processes and functions, such as the movement of cells, and the development of tissue engineering in cancer therapy. Cell mechanical properties depend on a variety of factors, such as cellular environments, and may also rely on external factors, such as the ambient temperature. The impact of temperature on cell mechanics is not clearly understood. To explore the effect of temperature on cell mechanics, we employed magnetic tweezers to apply a force of 1 nN to 4.5 µm superparamagnetic beads. The beads were coated with fibronectin and coupled to human epithelial breast cancer cells, in particular MCF-7 and MDA-MB-231 cells. Cells were measured in a temperature range between 25 and 45 °C. The creep response of both cell types followed a weak power law. At all temperatures, the MDA-MB-231 cells were pronouncedly softer compared to the MCF-7 cells, whereas their fluidity was increased. However, with increasing temperature, the cells became significantly softer and more fluid. Since mechanical properties are manifested in the cell's cytoskeletal structure and the paramagnetic beads are coupled through cell surface receptors linked to cytoskeletal structures, such as actin and myosin filaments as well as microtubules, the cells were probed with pharmacological drugs impacting the actin filament polymerization, such as Latrunculin A, the myosin filaments, such as Blebbistatin, and the microtubules, such as Demecolcine, during the magnetic tweezer measurements in the specific temperature range. Irrespective of pharmacological interventions, the creep response of cells followed a weak power law at all temperatures. Inhibition of the actin polymerization resulted in increased softness in both cell types and decreased fluidity exclusively in MDA-MB-231 cells. Blebbistatin had an effect on the compliance of MDA-MB-231 cells at lower temperatures, which was minor on the compliance MCF-7 cells. Microtubule inhibition affected the fluidity of MCF-7 cells but did not have a significant effect on the compliance of MCF-7 and MDA-MB-231 cells. In summary, with increasing temperature, the cells became significant softer with specific differences between the investigated drugs and cell lines.

Recent Advances on the Model, Measurement Technique, and Application of Single Cell Mechanics

Since the cell was discovered by humans, it has been an important research subject for researchers. The mechanical response of cells to external stimuli and the biomechanical response inside cells are of great significance for maintaining the life activities of cells. These biomechanical behaviors have wide applications in the fields of disease research and micromanipulation. In order to study the mechanical behavior of single cells, various cell mechanics models have been proposed. In addition, the measurement technologies of single cells have been greatly developed. These models, combined with experimental techniques, can effectively explain the biomechanical behavior and reaction mechanism of cells. In this review, we first introduce the basic concept and biomechanical background of cells, then summarize the research progress of internal force models and experimental techniques in the field of cell mechanics and discuss the latest mechanical models and experimental methods. We summarize the application directions of cell mechanics and put forward the future perspectives of a cell mechanics model.

Biomechanical and functional properties of trophoblast cells exposed to Group B Streptococcus in vitro and the beneficial effects of uvaol treatment

BACKGROUND

Group B streptococcus (GBS) is the main bacteria that infects pregnant women and can cause abortion and chorioamnionitis. The impact of GBS effects on human trophoblast cells remains largely elusive, and actions toward anti-inflammatory strategies in pregnancy are needed. A potent anti-inflammatory molecule, uvaol is a triterpene from olive oil and its functions in trophoblasts are unknown. We aimed to analyze biomechanical and functional effects of inactivated GBS in trophoblast cells, with the addition of uvaol to test potential benefits.

METHODS

HTR-8/SVneo cells were treated with uvaol and incubated with inactivated GBS. Cell viability and death were analyzed. Cellular elasticity and topography were accessed by atomic force microscopy. Nitrite production was evaluated by Griess reaction. Nuclear translocation of NFkB p65 was detected by immunofluorescence and Th1/Th2 cytokines by bead-based multiplex assay.

RESULTS

GBS at 10⁸ CFU increased cell death, which was partially prevented by uvaol. Cell stiffness, cytoskeleton organization and morphology were changed by GBS, and uvaol partially restored these alterations. Nuclear translocation of NFkB p65 began 15 min after GBS incubation and uvaol inhibited this process. GBS decreased IL-4 secretion and increased IL-1β, IFN-γ and IL-2, whereas uvaol reverted this.

CONCLUSIONS

The increased inflammation and cell death caused by GBS correlated with biomechanical and cytoskeleton changes found in trophoblast cells, while uvaol was effective its protective role.

GENERAL SIGNIFICANCE

Uvaol is a natural anti-inflammatory product efficient against GBS-induced inflammation and it has potential to be acquired through diet in order to prevent GBS deleterious effects in pregnancy.

Influence of magnetic field on morphological structures and physiological characteristics of bEnd.3 cells cultured on polypyrrole substrates

This paper employs a spin-coated method to construct conductive polypyrrole (PPy) substrates which present superior properties for controlling the morphological structures and functions of bEnd.3 cells. The PPy substrates with a homogeneous particle size, uniform distribution and proper roughness show enhanced hydrophilic characteristics and improve cell adhesion to the substrates. The changes in the mechanical properties of cells and the responses to the designed substrates and magnetic field are also explored. Due to the synergistic effect between the magnetic field and the conductive PPy substrate, the cells cultured in such an environment exhibit applanate shapes with more branches and enhanced cell viability. In addition, the cells preferentially extend along the magnetic field direction. The mechanical characteristics of cells change significantly under varying magnetic intensity stimulations (5–16 mT). The satisfying effect on cells' morphology and outgrowth is acquired at the magnetic intensities of 9–10 mT and duration of 20 min, compared with other stimulated groups, while retaining cell viability. Moreover, the cells express higher adhesion up to 5.2 nN. The results suggest that the application of the PPy substrates and magnetic field is a promising candidate for the protection of neurovascular units and treatment of neurological diseases.

The combination of magnetic stimulation and polypyrrole (PPy) substrates regulate the bEnd.3 cells mechanical and physical characterizations.

Association between biomechanical alterations and migratory ability of semaphorin-3A-treated thymocytes

BACKGROUND

Class 3 semaphorins are soluble proteins involved in cell adhesion and migration. Semaphorin-3A (Sema3A) was initially shown to be involved in neuronal guidance, and it has also been reported to be associated with immune disorders. Both Sema3A and its receptors are expressed by most immune cells, including monocytes, macrophages, and lymphocytes, and these proteins regulate cell function. Here, we studied the correlation between Sema3A-induced changes in biophysical parameters of thymocytes, and the subsequent repercussions on cell function.

METHODS

Thymocytes from mice were treated in vitro with Sema3A for 30min. Scanning electron microscopy was performed to assess cell morphology. Atomic force microscopy was performed to further evaluate cell morphology, membrane roughness, and elasticity. Flow cytometry and/or fluorescence microscopy were performed to assess the F-actin cytoskeleton and ROCK2. Cell adhesion to a bovine serum albumin substrate and transwell migration assays were used to assess cell migration.

RESULTS

Sema3A induced filopodia formation in thymocytes, increased membrane stiffness and roughness, and caused a cortical distribution of the cytoskeleton without changes in F-actin levels. Sema3A-treated thymocytes showed reduced substrate adhesion and migratory ability, without changes in cell viability. In addition, Sema3A was able to down-regulate ROCK2.

CONCLUSIONS

Sema3A promotes cytoskeletal rearrangement, leading to membrane modifications, including increased stiffness and roughness. This effect in turn affects the adhesion and migration of thymocytes, possibly due to a reduction in ROCK2 expression.

GENERAL SIGNIFICANCE

Sema3A treatment impairs thymocyte migration due to biomechanical alterations in cell membranes.

Nonlinear Biomechanical Characteristics of Deep Deformation of Native RBC Membranes in Normal State and under Modifier Action

The ability of membranes of native human red blood cells (RBCs) to bend into the cell to a depth comparable in size with physiological deformations was evaluated. For this, the methods of atomic force microscopy and atomic force spectroscopy were used. Nonlinear patterns of deep deformation (up to 600 nm) of RBC membranes were studied in normal state and under the action of modifiers: fixator (glutaraldehyde), natural oxidant (hemin), and exogenous intoxicator (zinc ions), in vitro. The experimental dependences of membrane bending for control RBC (normal) were approximated by the Hertz model to a depth up to 600 nm. The glutaraldehyde fixator and modifiers increased the absolute value of Young's modulus of membranes and changed the experimental dependences of probe indentation into the cells. Up to some depth h _Hz, the force curves were approximated by the Hertz model, and for deeper indentations h > h _Hz, the degree of the polynomial function was changed, the membrane stiffness increased, and the pattern of indentation became another and did not obey the Hertz model. Quantitative characteristics of nonlinear experimental dependences were calculated for deep bending of RBC membranes by approximating them by the degree polynomial function.

A two-phase response of endothelial cells to hydrostatic pressure

The vascular endothelium is exposed to three types of mechanical forces: blood flow-mediated shear stress, vessel-diameter dependent wall tension and hydrostatic pressure. Despite considerable variations of blood pressure in normal and pathological physiology, little is known about the acute molecular and cellular effects of hydrostatic pressure on endothelial cells. Here, we used a combination of quantitative fluorescence microscopy, atomic force microscopy and molecular perturbations to characterize the specific response of endothelial cells to pressure application. We identified a two-phase response of endothelial cells to acute (1 h) vs. chronic (24 h) pressure application (100 mmHg). While both regimes induce cortical stiffening, the acute response is linked to calcium-mediated myosin activation, whereas the chronic cell response is dominated by increased cortical actin density and a loss in endothelial barrier function. GsMTx-4 and amiloride inhibit the acute pressure response, which suggest the sodium channel ENaC as key player in endothelial pressure sensing. The described two-phase pressure response may participate in the differential effects of transient changes in blood pressure and hypertension.

Multifrequency Optomechanical Stiffness Measurement of Single Adherent Cells on a Solid Substrate with High Throughput

Mechanical properties of a cell reflect its biological and pathological conditions and there have been active research efforts to develop high-throughput platforms to mechanically characterize single cells. Yet, many of these research efforts are focused on suspended cells and use a flow-through configuration. In this paper, the stiffness of single adherent cells are optomechanically characterized using the vibration-induced phase shift (VIPS) without detaching them from the substrate. With the VIPS measurements, the frequency and amplitude dependency of the cell stiffness is investigated and statistically significant difference in the cell stiffness is confirmed after exposure to various drugs affecting cytoskeleton network. Furthermore, a 3-dimensional finite element model of a cell on a vibrating substrate is developed to extract the mechanical property from the measured VIPS. The developed technique can characterize the mechanical properties of single adherent cells at multiple frequencies with high throughput and will provide valuable clues in understanding cell mechanics.

Using cell monolayer rheology to probe average single cell mechanical properties

The cell monolayer rheology technique consists of a commercial rotational rheometer that probes the mechanical properties of a monolayer of isolated cells. So far we have described properties of an entire monolayer. In this short communication, we show that we can deduce average single cell properties. Results are in very good agreement with earlier work on single cell mechanics. Our approach provides a mean of 105-106 adherent cells within a single experiment. This makes the results very reproducible. We extend our work on cell adhesion strength and deduce cell adhesion forces of fibroblast cells on fibronectin coated glass substrates.

Effects of temperature and cellular interactions on the mechanics and morphology of human cancer cells investigated by atomic force microscopy

Cell mechanics plays an important role in cellular physiological activities. Recent studies have shown that cellular mechanical properties are novel biomarkers for indicating the cell states. In this article, temperature-controllable atomic force microscopy (AFM) was applied to quantitatively investigate the effects of temperature and cellular interactions on the mechanics and morphology of human cancer cells. First, AFM indenting experiments were performed on six types of human cells to investigate the changes of cellular Young's modulus at different temperatures and the results showed that the mechanical responses to the changes of temperature were variable for different types of cancer cells. Second, AFM imaging experiments were performed to observe the morphological changes in living cells at different temperatures and the results showed the significant changes of cell morphology caused by the alterations of temperature. Finally, by co-culturing human cancer cells with human immune cells, the mechanical and morphological changes in cancer cells were investigated. The results showed that the co-culture of cancer cells and immune cells could cause the distinct mechanical changes in cancer cells, but no significant morphological differences were observed. The experimental results improved our understanding of the effects of temperature and cellular interactions on the mechanics and morphology of cancer cells.

Optomechanical measurement of the stiffness of single adherent cells

Recent advances in mechanobiology have accumulated strong evidence showing close correlations between the physiological conditions and mechanical properties of cells. In this paper, a novel optomechanical technique to characterize the stiffness of single adherent cells attached on a substrate is reported. The oscillation in a cell's height on a vertically vibrating reflective substrate is measured with a laser Doppler vibrometer as apparent changes in the phase of the measured velocity. This apparent phase shift and the height oscillation are shown to be affected by the mechanical properties of human colorectal adenocarcinoma cells (HT-29). The reported optomechanical technique can provide high-throughput stiffness measurement of single adherent cells over time with minimal perturbation.

Glutaraldehyde fixation preserves the trend of elasticity alterations for endothelial cells exposed to TNF-α

Among the users of atomic force microscopy based techniques, there is an ongoing discussion, whether cell elasticity measurements performed on fixed cells could be used for determination of the relative elasticity changes of the native (unfixed) cells subjected to physiologically active external agents. In this article, we present a case, for which the legitimacy of cell fixation for elasticity measurements is justified. We provide an evidence that the alterations of cell elasticity triggered by tumor necrosis factor alpha (TNF-α) in EA.hy926 endothelial cells are preserved after glutaraldehyde (GA) fixation. The value of post-fixation elasticity parameter is a product of the elasticity parameter obtained for living cells and a constant value, dependent on the GA concentration. The modification of the initial value of elasticity parameter caused by remodeling of the cortical actin cytoskeleton is reflected in the elasticity measurements performed on fixed cells. Thus, such fixation procedure may be particularly helpful for experiments, where the influence of an external agent on the cell cortex should be assessed and AFM measurements of living cells are problematic or better statistics is needed.

Macrophage adhesion on fibronectin evokes an increase in the elastic property of the cell membrane and cytoskeleton: an atomic force microscopy study

Interactions between cells and microenvironments are essential to cellular functions such as survival, exocytosis and differentiation. Cell adhesion to the extracellular matrix (ECM) evokes a variety of biophysical changes in cellular organization, including modification of the cytoskeleton and plasma membrane. In fact, the cytoskeleton and plasma membrane are structures that mediate adherent contacts with the ECM; therefore, they are closely correlated. Considering that the mechanical properties of the cell could be affected by cell adhesion-induced changes in the cytoskeleton, the purpose of this study was to investigate the influence of the ECM on the elastic properties of fixed macrophage cells using atomic force microscopy. The results showed that there was an increase (~50%) in the Young's modulus of macrophages adhered to an ECM-coated substrate as compared with an uncoated glass substrate. In addition, cytochalasin D-treated cells had a 1.8-fold reduction of the Young's modulus of the cells, indicating the contribution of the actin cytoskeleton to the elastic properties of the cell. Our findings show that cell adhesion influences the mechanical properties of the plasma membrane, providing new information toward understanding the influence of the ECM on elastic alterations of macrophage cell membranes.

The roles of cellular nanomechanics in cancer

The biomechanical properties of cells and tissues may be instrumental in increasing our understanding of cellular behavior and cellular manifestations of diseases such as cancer. Nanomechanical properties can offer clinical translation of therapies beyond what are currently employed. Nanomechanical properties, often measured by nanoindentation methods using atomic force microscopy, may identify morphological variations, cellular binding forces, and surface adhesion behaviors that efficiently differentiate normal cells and cancer cells. The aim of this review is to examine current research involving the general use of atomic force microscopy/nanoindentation in measuring cellular nanomechanics; various factors and instrumental conditions that influence the nanomechanical properties of cells; and implementation of nanoindentation methods to distinguish cancer cells from normal cells or tissues. Applying these fundamental nanomechanical properties to current discoveries in clinical treatment may result in greater efficiency in diagnosis, treatment, and prevention of cancer, which ultimately can change the lives of patients.