Synthesis and characterization of Ce-substituted hydroxyapatite by sol–gel method

Doxorubicin loaded cerium substituted hydroxyapatite nanoparticles: A promising new therapeutic approach for bone regeneration, doxorubicin delivery, and cancer treatment

The current study used the precipitation method to prepare pure calcium hydroxyapatite (HA) and cerium-substituted hydroxyapatite (Ce-HA) nanoparticles, where cerium ions were exchanged into the HA structure at different concentrations ranging from 3 to 7 wt%. X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and zeta potential were used to examine the structural characteristics of the nanoparticles. Additionally, the antibacterial and antifungal effects of the produced materials on Gram-positive, Gram-negative, and fungal bacterial species were studied. Nanoparticles with cerium doping showed effective antibacterial and antifungal properties. All samples were tested for bioactivity in simulated body fluid (SBF), and the formation of an apatite layer on their surfaces was highlighted using SEM in conjunction with energy-dispersive X-rays (EDX).Doxorubicin (DOX) release from Ce-HA nanoparticles and pure HA was tested in phosphate-buffered saline (PBS) for up to 28 days. Both nanoparticles were able to release the drug while still being semi-fully loaded. Similarly, the cytotoxic effect of all produced samples on the MG-63 cell line was evaluated, and all samples showed good cytocompatibility. The cytotoxic effect of doxorubicin-loaded nanoparticles showed promising anticancer activity against bone cancer cells, especially samples with high cerium content. The resulting nanoparticles show excellent promising ability for the delivery of doxorubicin to bone cancer with the capacity for bone regeneration.

Resorbable membrane design: In vitro characterization of silver doped-hydroxyapatite-reinforced XG/PEI semi-IPN composite

In this study, the production and characterization of silver-doped hydroxyapatite (AgHA) reinforced Xanthan gum (XG) and Polyethyleneimine (PEI) reinforced semi-interpenetrating polymer network (IPN) biocomposite, known to be used as bone cover material for therapeutic purposes in bone tissue, were performed. XG/PEI IPN films containing 2AgHA nanoparticles were produced by simultaneous condensation and ionic gelation. Characteristics of 2AgHA-XG/PEI nanocomposite film were evaluated by structural, morphological (SEM, XRD, FT-IR, TGA, TM, and Raman) and biological activity analysis (degradation, MTT, genotoxicity, and antimicrobial activity) techniques. In the physicochemical characterization, it was determined that 2AgHA nanoparticles were homogeneously dispersed in the XG/PEI-IPN membrane at high concentration and the thermal and mechanical stability of the formed film were high. The nanocomposites showed high antibacterial activity against Acinetobacter Baumannii (A.Baumannii), Staphylococcus aureus (S.aureus), and Streptococcus mutans (S.mutans). L929 exhibited good biocompatibility for fibroblast cells and was determined to support the formation of MCC cells. It was shown that a resorbable 2AgHA-XG/PEI composite material was obtained with a high degradation rate and 64% loss of mass at the end of the 7th day. Physico-chemically developed biocompatible and biodegradable XG-2AgHA/PEI nanocomposite semi-IPN films possessed an important potential for the treatment of defects in bone tissue as an easily applicable bone cover. Besides, it was noted that 2AgHA-XG/PEI biocomposite could increase cell viability, especially in dental-bone treatments for coating, filling, and occlusion.

Lanthanides-Substituted Hydroxyapatite for Biomedical Applications

Lately, there has been an increasing demand for materials that could improve tissue regenerative therapies and provide antimicrobial effects. Similarly, there is a growing need to develop or modify biomaterials for the diagnosis and treatment of different pathologies. In this scenario, hydroxyapatite (HAp) appears as a bioceramic with extended functionalities. Nevertheless, there are certain disadvantages related to the mechanical properties and lack of antimicrobial capacity. To circumvent them, the doping of HAp with a variety of cationic ions is emerging as a good alterative due to the different biological roles of each ion. Among many elements, lanthanides are understudied despite their great potential in the biomedical field. For this reason, the present review focuses on the biological benefits of lanthanides and how their incorporation into HAp can alter its morphology and physical properties. A comprehensive section of the applications of lanthanides-substituted HAp nanoparticles (HAp NPs) is presented to unveil the potential biomedical uses of these systems. Finally, the need to study the tolerable and non-toxic percentages of substitution with these elements is highlighted.

Current Development in Biomaterials-Hydroxyapatite and Bioglass for Applications in Biomedical Field: A Review

Inorganic biomaterials, including different types of metals and ceramics are widely used in various fields due to their biocompatibility, bioactivity, and bioresorbable capacity. In recent years, biomaterials have been used in biomedical and biological applications. Calcium phosphate (CaPs) compounds are gaining importance in the field of biomaterials used as a standalone material or in more complex structures, especially for bone substitutes and drug delivery systems. The use of multiple dopants into the structure of CaPs compounds can significantly improve their in vivo and in vitro activity. Among the general information included in the Introduction section, in the first section of this review paper, the authors provided a background on the development of hydroxyapatite, methods of synthesis, and its applications. The advantages of using different ions and co-ions for substitution into the hydroxyapatite lattice and their influence on physicochemical, antibacterial, and biological properties of hydroxyapatite are also presented in this section of the review paper. Larry Hench's 45S5 Bioglass®, commercially named 45S5, was the first bioactive glass that revealed a chemical bond with bone, highlighting the potential of this biomaterial to be widely used in biomedicine for bone regeneration. The second section of this article is focused on the development and current products based on 45S5 Bioglass®, covering the historical evolution, importance of the sintering method, hybrid bioglass composites, and applications. To overcome the limitations of the original biomaterials, studies were performed to combine hydroxyapatite and 45S5 Bioglass® into new composites used for their high bioactivity and improved properties. This particular type of combined hydroxyapatite/bioglass biomaterial is discussed in the last section of this review paper.

Evolution of dynamics of physico-chemical and mechanical properties of hydroxyapatite with fluorine addition and degradation stability of new matrices

This multidisciplinary study examined sensitively the change in the dynamics of main mechanical performance, stability of crystal structure, crystallinity quality, strength, corrosion resistance, biocompatibility, resistance to structural degradation/separations and mechanical durability features of hydroxyapatite (HAp) biomedical materials based on the fluorine addition and degradation process to guide future medical and dental treatment studies. In the study, the fluorine ions were used to be the dental coating, filling and supporting material for biologically or synthetically produced bone minerals. The general characteristic properties were investigated by means of standard spectroscopic, structural and mechanical analysis methods including RAMAN, SEM-EDS, TEM, Vickers micro-indentation hardness and density measurements. A time dependent release test was performed to evaluate possible fluorine ion release after the degradation process. It was found that the fundamental characteristic properties of HAp biomedical materials are noted to improve with the increase in the fluoride level up to 2% due much more stabilization of HAp crystal system. The combination of RAMAN spectra and powder XRD analyzes indicates that 2% addition level affects positively the formation velocity of characteristic HAP phase. Besides, fluorine doped HAp materials all exhibited the main characteristic peaks after degradation process. This is attributed to the fact that the fluorine ions enabled the hydroxyapatite to enhance the structural quality and stability towards the corrosion environment. However, in case of excess dopant level of 3% the degradation rates were obtained to increase due to higher contribution rate and especially electrostatic interactions. As for the surface morphology examinations, 2% fluorine added HAp with the highest density of 3.0879 g/cm³ was determined to present the superior crystallinity quality (smallest grain size, best smooth surface, honeycomb pattern, regular shaped particles and densest particle distributions through the specimen surface). Conversely, the excess fluorine triggered to increase seriously degree of micro/macro porosity in the surface morphology and microscopic structural problems in the crystal system. Thus, the HAp doped with 3% was the most affected material from the degradation process. Additionally, the fluorine ion values read after the release process were quite far from the value that could cause toxic effects. Lastly, the optimum fluorine addition provides the positive effects on the highest durability, stiffness and mechanical fracture strength properties as a consequence of differentiation in the surface residual compressive stress regions (lattice strain fields), amplification sites and active operable slip systems in the matrix. Hence, the crack propagations prefer to proceed in the transcrystalline regions rather than the intergranular parts. Similarly, it was found that Vickers micro-indentation hardness tests showed that the microhardness parameters increased after the degradation process. All in all, the fluorine addition level of 2% was noted to be good choice to improve the fundamental characteristic properties of hydroxyapatite biomedical materials for heavy-duty musculoskeletal, orthopedic implant, biological and therapeutic applications in medicine and dentistry application fields.

Zinc substituted hydroxyapatite/silk fiber/methylcellulose nanocomposite for bone tissue engineering applications

Fibrous bio-composite based on silk fiber (SF), methylcellulose (MC) and zinc substituted hydroxyapatite (Zn_xCa_5-x (PO₄)₃(OH) (x = 0.1, 0.2, 0.5 and 1.0)) were obtained with the use of electrospinning (E-Spin) method. XRD, FTIR, SEM-EDAX, swelling, porosity and mechanical properties of the composites were analyzed. The elongation at break (%) (20.97-317.20 %) and tensile strength (29.85-110.92 MPa) of nanocomposites was increased with an increase in the wt% of Zn-HAP in SF/MC. An increase in the zone of inhibition with an increase in the wt% of Zn-HAP into the SF/MC was observed against E. coli (34 ± 0.33 to 47 ± 1.15), S. aureus (28 ± 0.24 to 38 ± 1.32) and C. albicans (24 ± 0.36 to 39 ± 2.36). The in-vitro biomineralization study using SBF (simulated body fluid) showed apatite layer formation on the nano-composite. In addition, the optimized (20 wt % of Zn₁.₀Ca_4.0(PO₄)₃(OH)/SF/MC) nano-composite showed good cell viability against human bone osteosarcoma (MG-63) cells.

A review on the synthesis and properties of hydroxyapatite for biomedical applications

Hydroxyapatite (HA or HAp) is one of the most preferred biomaterials, specifically for bone tissue engineering. HAp is available naturally and is also chemically synthesized. The properties, shape, size and crystalline structure and applications of HAp vary widely depending on the source and extraction methods used. In addition to conventional chemical approaches such as precipitation or sol-gel techniques, newer methods such as microwave synthesis and atomic-layer deposition provide an opportunity to generate HAp with desirable structure and properties. Various methods used for the synthesis of HAp have their own pros and cons. Hence, it is essential to understand the role of specific methods and conditions on the properties and structure of HAps in order to obtain HAp with properties suitable for specific applications. In addition to pure HAp, substantial efforts have been made to dope HAp with various minerals or bioentities to enhance their suitability for medical, environmental remediation and other approaches. In this review, we provide an overview of the various chemical methods used to produce HAp, properties of the HAp produced and its potential applications. Particular focus of this paper is on the co-relation between properties and processes used to synthesis HAp. This review will enable readers to quickly understand the importance of synthesis methods and conditions on the properties of HAp and choose appropriate means to generate HAp with desired properties for specific applications.

Synthesis and Characterization of Photoluminescent Ce(III) and Ce(IV) Substituted Hydroxyapatite Nanomaterials by Co-Precipitation Method: Cytotoxicity and Biocompatibility Evaluation

Improved compounds of Ce(III) and Ce(IV)-doped hydroxyapatite (Ca_10-xCe_x(PO₄)₆(OH)₂) with different concentrations such as x = 0.5, 1, 2.5, 5, and 10%, obtained by the simple co-precipitation method were synthesized. The cerium (3⁺) and cerium (4⁺)-doped hydroxyapatite were evaluated for biocompatibility and fluorescence properties. It was found that the cerium-HAp powders were non-toxic, even at higher level of concentration. The synthesized powders were further characterized by FTIR spectrometry, UV-Vis spectroscopy, XRD diffraction, SEM and TEM analysis. Therefore, the present study proves that the developed cerium (3⁺) and cerium (4⁺)-doped hydroxyapatite, respectively can be widely used as luminescent labeling materials, with improved biological properties.

Effect of Cerium-Containing Hydroxyapatite in Bone Repair in Female Rats with Osteoporosis Induced by Ovariectomy

Osteoporosis is a public health problem, with bone loss being the main consequence. Hydroxyapatite (HA) has been largely used as a bioceramic to stimulate bone growth. In our work, a cerium-containing HA (Ce-HA) has been proposed and its effects on the antimicrobial and bone-inducing properties were investigated. The synthesis of the materials occurred by the suspension–precipitation method (SPM). The XRD (X-ray Diffraction) confirmed the crystalline phase, and the Rietveld refinement confirmed the crystallization of HA and Ce-HA in a hexagonal crystal structure in agreement with ICSD n° 26205. Characterizations by FT-IR (Fourier Transform Infrared Spectroscopy), XPS (X-ray Photoemission Spectroscopy), and FESEM-EDS (Field Emission Scanning Electron Microscope-Energy Dispersive X-ray Spectroscopy) confirmed the presence of cerium (Ce3+ and Ce4+). The antibacterial activity of Has was evaluated against Staphylococcus aureus 25,923 and Escherichia coli 25,922 strains, which revealed that the material has antimicrobial properties and the cytotoxicity assay indicated that Ce-containing HA was classified as non-toxic. The effects of Ce-HA on bone repair, after application in bone defects in the tibia of female rats with osteoporosis induced by ovariectomy (OVX), were evaluated. After 15 and 30 days of implantation, the samples were analyzed by Raman, histology and X-ray microtomography. The results showed that the animals that had the induced bone defects filled with the Ce-HA materials had more expressive bone neoformation than the control group.

Synthesis of Silicon- and Carbonate-doped Biomimetic Hydroxyapatite in the Presence of Citrate Ions and its Physicochemical, Bioactivity Properties

The present study investigated the phase composition, the structural, morphological, and bioactivity properties of silicon- and carbonate-doped biomimetic hydroxyapatite synthesized by precipitation from aqueous solutions in the presence of different amounts of citrate ions. The X-ray diffraction and Fourier transform infrared spectroscopy analyses confirmed that all the samples exhibited single-phase. Base on the results of the morphological study, all the obtained samples consisted of porous agglomerated particles made up of tiny crystallites in the nanometer range. The change in structural order, as well as the decrease in particle size and degree of crystallinity result from the presence of citrate ions were revealed by X-ray diffraction, dynamic light scattering, and scanning electron microscopy analyses. Bioactivity properties of samples were studied by analyzing their bioresorbability in physiological saline (ω (NaCl) = 0.9%) and evaluating their solubility in SBF solution after a certain period of soaking time. The amount of the released Ca2+ ions was found to increase with the increasing concentration of citrate ions introduced in the synthesis process. The better solubility of material with the presence of citrate ions was beneficial in the growth of apatite on its surface that made produced material more biocompatible.

Biomimetic hydroxyapatite/silkfibre/methylcellulose composites for bone tissue engineering applications

Hydroxyapatite (HAP)/silk fibre (SF)/methylcellulose (MC) composites were developed by an electrospinning (E-Spin) method.

Presentation of Antibacterial and Therapeutic Anti-inflammatory Potentials to Hydroxyapatite via Biomimetic With Azadirachta indica: An in vitro Anti-inflammatory Assessment in Contradiction of LPS-Induced Stress in RAW 264.7 Cells

In the present study, for the first time, biomimetization of hydroxyapatite (HA) with Azadirachta indica (AI) was proposed and established its antioxidant, antibacterial, and anti-inflammatory potential on lipopolysaccharide (LPS). The ethanolic extract of AI was found rich with phenolics and flavonoids, and determined their concentration as 8.98 ± 1.41 mg gallic acid equivalents/g and 5.46 ± 0.84 mg catechin equivalents/g, respectively. The HA was prepared by sol-gel method from calcium nitrate tetrahydrate and orthophosphoric acid, and successfully biomimetization was performed with ethanolic extract of AI. The FTIR analysis settled that as-synthesized HA-AI composite was comprised of both HA and AI. The XRD pattern and Zeta potential revealed that the HA-AI composite was crystalline and negative in charge (-24.0 mV). The average-size distribution, shape, and size of the HA-AI composite was determined as 238.90 d.nm, spherical, and 117.90 nm from size distribution, SEM, and HR-TEM analysis, respectively. The SEM-EDX concluded that the HA-AI composite was comprised of elements of HA as well as AI. The HA-AI composite presented potential antioxidant activity and its EC50 values (dose required to inhibit about half of the radicals) for ABTS and DPPH assays were determined as 115.72 ± 2.33 and 128.51 ± 1.04 μg/ml, respectively. The HA-AI composite showed potent antibacterial activity, and minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) towards S. aureus (ATCC 700699) and E. coli (ATCC 10536) were correspondingly determined as 266.7 ± 28.87 and 600.0 ± 50.0 μg/ml, and 400.0 ± 86.6 and 816.7 ± 76.38 μg/ml. Most importantly, HA-AI composite presented the potential anti-inflammatory response toward lipopolysaccharide (LPS) in RAW 264.7 cells. The dose of 250 μg/ml of HA-AI composite has shown optimum protection against LPS-induced stress (1 μg/ml) by scavenging oxidants and regulating mitochondrial membrane potential (MMP), inflammatory and apoptotic factors. Thus, this study concluded that the impartation of potential biofunctional features to HA from plant sources through biomimetic approach is much beneficial and could find potential application in dentistry and orthopedic.

Synthesis of Hydroxyapatite with Antibacterial Properties Using a Microwave-Assisted Combustion Method

The prevention of implant-associated infections has been increasing clinically in orthopedic surgery. Hydroxyapatite with antibacterial properties was synthesized using a microwave-assisted combustion method. High crystallinity at low temperature can be achieved using this method. The synthesized hydroxyapatite exhibited a superior clear zone for both Gram-positive and Gram-negative bacteria. Electron spin resonance (ESR) and X-ray photoelectron spectroscopy (XPS) were used for the radical investigation. The application of intelligent ink testing and an antioxidant assay using DPPH reduction were also used to confirm the existence of radicals. These techniques provided data confirming that radicals are responsible for the antibacterial properties. The synthesized antibacterial hydroxyapatite would be a good candidate for the prevention any infection with medical implants and injection materials causing failure in bone repair.

Cationic Substitutions in Hydroxyapatite: Current Status of the Derived Biofunctional Effects and Their In Vitro Interrogation Methods

High-performance bioceramics are required for preventing failure and prolonging the life-time of bone grafting scaffolds and osseous implants. The proper identification and development of materials with extended functionalities addressing socio-economic needs and health problems constitute important and critical steps at the heart of clinical research. Recent findings in the realm of ion-substituted hydroxyapatite (HA) could pave the road towards significant developments in biomedicine, with an emphasis on a new generation of orthopaedic and dentistry applications, since such bioceramics are able to mimic the structural, compositional and mechanical properties of the bone mineral phase. In fact, the fascinating ability of the HA crystalline lattice to allow for the substitution of calcium ions with a plethora of cationic species has been widely explored in the recent period, with consequent modifications of its physical and chemical features, as well as its functional mechanical and in vitro and in vivo biological performance. A comprehensive inventory of the progresses achieved so far is both opportune and of paramount importance, in order to not only gather and summarize information, but to also allow fellow researchers to compare with ease and filter the best solutions for the cation substitution of HA-based materials and enable the development of multi-functional biomedical designs. The review surveys preparation and synthesis methods, pinpoints all the explored cation dopants, and discloses the full application range of substituted HA. Special attention is dedicated to the antimicrobial efficiency spectrum and cytotoxic trade-off concentration values for various cell lines, highlighting new prophylactic routes for the prevention of implant failure. Importantly, the current in vitro biological tests (widely employed to unveil the biological performance of HA-based materials), and their ability to mimic the in vivo biological interactions, are also critically assessed. Future perspectives are discussed, and a series of recommendations are underlined.

Development and characterisation of novel Ce‐doped hydroxyapatite–Fe3 O4 nanocomposites and their in vitro biological evaluations for biomedical applications

Hydroxyapatite (HAP: Ca₁₀ (PO₄)₆ (OH)₂) is extensively used in biomedical field because of its biocompatibility, osteoconductivity and non‐toxicity properties. However, HAP exhibits poor mechanical strength and bacterial restriction behavior. To overcome these drawbacks, various metal ions such as Ag⁺, Zn²⁺, Cu²⁺, Ti⁴⁺ and Ce^4+/3+ are incorporated in HAP matrix to increase the mechanical and biological properties. Among these, Cerium (Ce) is selected as antibacterial agent due to its high thermal stability and its applications in dental fillings, bone healing and catheters. Fe₃ O₄ nanoparticles were used in hyperthermia treatment, magnetic fluid recordings and catalysis. In this present study, we have synthesized nanocomposites consisting of 1.25% Ce doped HAP with various concentrations of Fe₃ O₄ NPs as 90:10 (C‐1), 70:30 (C‐2) and 50:50 wt% (C‐3) using ball milling technique. The obtained Ce@HAP‐Fe₃ O₄ nanocomposites were characterized by ATR‐FTIR, XRD, VSM, SEM‐EDAX and TEM analysis. Further, the fabricated Ce@HAP‐Fe₃ O₄ nanocomposites were tested for its antibacterial activity towards Staphylococcus aureus (S. aureus) and Escherichia coli (E.coli), where C‐3 composites exhibit the excellent pathogen inhibition towards E.coli. In addition, the cytotoxicity evaluation on C‐3 nanocomposites by in vitro biocompatibility study using MG‐63 cells shows the prominent viable cell enhancement up to 400µg/mL concentrations.

In-vitro biocompatibility, bioactivity and photoluminescence properties of Eu3+ /Sr2+ dual-doped nano-hydroxyapatite for biomedical applications

In the present investigation, we have successfully synthesized luminescent Eu³⁺ -doped and Eu³⁺ /Sr²⁺ codoped hydroxyapatite (HA) nanoparticles through sol-gel assisted precipitation method with the aim of developing novel biomaterials containing osteoblast mineral (Sr²⁺ ) and luminescence activator (Eu³⁺ ). The structure, morphology, thermal stability, and luminescence properties of the resultant spherical nanoparticles (50-100 nm diameters) were studied. Moreover, the in-vitro bioactivity of Eu_0.1 Sr_0.1 HA nanoparticles was investigated by immersing in the simulated body fluid for many weeks. The antimicrobial activity results against gram positive and gram negative bacterial stains, showed better resistivity for the Eu_0.1 Sr_0.1 HA among the other compositions. The MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] assay of live/dead cells cultured with Eu³⁺ /Sr²⁺ -doped HA nanoparticles retained its normal morphology and did not show a significant impact on cell proliferation at various incubation days, which evidence for the material's superior biocompatible nature even at a higher concentration of 375 µg/mL. Thus, the incorporation of dual ions in HA nanoparticles with strong luminescence properties develops potential biomaterial for live cell imaging and in nanomedicine. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2191-2201, 2018.

The deposition of strontium and zinc Co-substituted hydroxyapatite coatings

The in vitro and in vivo performance of hydroxyapatite (HAp) coatings can be modified by the addition of different trace ions, such as silicon (Si), lithium (Li), magnesium (Mg), zinc (Zn) or strontium (Sr) into the HAp lattice, to more closely mirror the complex chemistry of human bone. To date, most of the work in the literature has considered single ion-substituted materials and coatings, with limited reports on co-substituted calcium phosphate systems. The aim of this study was to investigate the potential of radio frequency magnetron sputtering to deposit Sr and Zn co-substituted HAp coatings using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The FTIR and XPS results highlight that all of the Sr, Zn and Sr-Zn co-substituted surfaces produced are all dehydroxylated and are calcium deficient. All of the coatings contained HPO₄^2- groups, however; only the pure HAp coating and the Sr substituted HAp coating contained additional CO₃^2- groups. The XRD results highlight that none of the coatings produced in this study contain any other impurity CaP phases, showing peaks corresponding to that of ICDD file #01-072-1243 for HAp, albeit shifted to lower 2θ values due to the incorporation of Sr into the HAp lattice for Ca (in the Sr and Sr-Zn co-substituted surfaces only). Therefore, the results here clearly show that RF magnetron sputtering offers a simple means to deliver Sr and Zn co-substituted HAp coatings with enhanced surface properties. (a) XRD patterns for RF magnetron sputter deposited hydroxyapatite coatings and (b)-(d) for Sr, Zn and Sr-Zn co-substituted coatings, respectively. The XPS spectra in (b) confirms the presence of a HA sputter deposited coating as opposed to

Mineral-substituted hydroxyapatite reinforced poly(raffinose-citric acid)–polyethylene glycol nanocomposite enhances osteogenic differentiation and induces ectopic bone formation

Progress of biomimetic mineral-substituted hydroxyapatite reinforced poly(raffinose-citric acid)–polyethylene glycol–poly(raffinose-citric acid) for prospective ectopic bone formation.

The effect of simulating body fluid on the structural properties of hydroxyapatite synthesized in the presence of citric acid

In present work, the effect of citric acid (CA) addition in different amounts (0, 1, 5 and 10 ml) on the structure of hydroxyapatite (HAp) was investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy techniques. The crystallite dimensions, lattice parameters, unit cell volume, crystallinity percentage and Ca/P molar ratio were found to be affected by the CA content. To investigate the influence of CA on the bioactive properties of the HAp samples and to determine the optimum amount of CA, in vitro soaking tests in simulated body fluid (SBF) were performed. Although the samples' morphology was found to be affected by neither the amount of CA nor the soaking time in SBF, the soaking results revealed that the maximum changes in the Ca/P ratio were found for the HAp samples prepared in the presence of the highest amounts of CA, which pointed out to the highest bioactivity of these samples.