Rapid biomimetic mineralization of collagen fibrils and combining with human umbilical cord mesenchymal stem cells for bone defects healing

Polyaspartic Acid-Calcium-Lanthanum Complexes Induce Antibacterial Remineralization of Dentin and In-Depth Occlusion of Dentinal Tubules

Dental caries is a global oral dilemma leading to demineralization of tooth hard tissues and exposure of dentinal tubules (DTs). Multifunctional restorative strategies, including remineralization, antibacterial properties, and DT occlusion, are urgently needed for dental caries management but remain a significant challenge. Herein, the polyaspartic acid-calcium-lanthanum suspension (5 g L-1-3.06 м-0.34 м) followed by phosphate solution (2.04 м) is adopted to conduct polyelectrolyte-cation complexes pre-precursor process. This strategy, for the first time, successfully induces La-doped intrafibrillar mineralization of collagen fibrils with lanthanum-doped hydroxyapatite (La-HAp). After sequential application of two mineralization media, the demineralized dentin is fully remineralized and the DTs are deeply occluded to a depth of 100 µm with La-HAp after 7 d of incubation in artificial saliva or oral cavity of rabbit. The remineralized dentin demonstrates antibacterial properties against cariogenic bacteria (Streptococcus mutans) both in vitro and in vivo, and its mechanical properties are almost restored to those of intact dentin. The mineralization media cause no apparent irritation to oral mucosa or dental pulp. Hence, this multifunctional strategy confers the remineralized dentin surface with antibacterial properties and blocks the invasion of cariogenic bacteria through DTs, providing insight into the clinical management of dentin caries accompanied by dentin hypersensitivity.

Matrix vesicle-inspired delivery system based on nanofibrous chitosan microspheres for enhanced bone regeneration

Inspired by the initial mineralization process with bone matrix vesicles (MVs), this study innovatively developed a delivery system to mediate mineralization during bone regeneration. The system comprises nanofibrous chitosan microspheres (NCM) and poly (allylamine hydrochloride)-stabilized amorphous calcium phosphate (PAH-ACP), which is thereafter referred to as NCMP. NCM is synthesized through the thermal induction of chitosan molecular chains, serving as the carrier, while PAH-ACP functions as the mineralization precursor. Additionally, the nanofibrous network of NCMP mimics the architecture of natural extracellular matrix (ECM), creating an optimal niche for the active adhesion of stem cells to its surface, exhibiting good biocompatibility, immunoregulation, and osteogenic performance. In vivo, NCMP effectively recruits cells and mineralizes collagen, modulates cell behavior and differentiation, and promotes in situ biomineralization in rat calvarial defects. These results underscore the dual efficacy of NCMP not only as an effective delivery system for mineralization precursors but also as ECM-mimicking bio-blocks, offering a promising avenue for enhancing the repair and regeneration of bone defects.

STMP and PVPA as Templating Analogs of Noncollagenous Proteins Induce Intrafibrillar Mineralization of Type I Collagen via PCCP Process

The phosphorylated noncollagenous proteins (NCPs) play a vital role in manipulating biomineralization, while the mechanism of phosphorylation of NCPs in intrafibrillar mineralization of collagen fibril has not been completely deciphered. Poly(vinylphosphonic acid) (PVPA) and sodium trimetaphosphate (STMP) as templating analogs of NCPs induce hierarchical mineralization in cooperation with indispensable sequestration analogs such as polyacrylic acid (PAA) via polymer-induced liquid-like precursor (PILP) process. Herein, STMP-Ca and PVPA-Ca complexes are proposed to achieve rapid intrafibrillar mineralization through polyelectrolyte-Ca complexes pre-precursor (PCCP) process. This strategy is further verified effectively for remineralization of demineralized dentin matrix both in vitro and in vivo. Although STMP micromolecule fails to stabilize amorphous calcium phosphate (ACP) precursor, STMP-Ca complexes facilely permeate into intrafibrillar interstices and trigger phase transition of ACP to hydroxyapatite within collagen. In contrast, PVPA-stabilized ACP precursors lack liquid-like characteristic and crystallize outside collagen due to rigid conformation of PVPA macromolecule, while PVPA-Ca complexes infiltrate into partial intrafibrillar intervals under electrostatic attraction and osmotic pressure as evidenced by intuitionistic 3D stochastic optical reconstruction microscopy (3D-STORM). The study not only extends the variety and size range of polyelectrolyte for PCCP process but also sheds light on the role of phosphorylation for NCPs in biomineralization.

Effects of endodontic root canal irrigants on tooth dentin revealed by infrared spectroscopy: a systematic literature review

BACKGROUND

Root canal irrigation endodontic solutions have effects on the chemistry of dentin. Infrared spectroscopy is a non-destructive chemical characterization method where the strength of absorption often correlates with mineral or organic composition.

OBJECTIVES

To survey effects of commonly used irrigation solutions on the composition of root dentin as detected by widely-available Fourier transform infrared spectroscopy (FTIR) methods.

METHODS

Electronic databases were searched for articles published between 1983 to 2023. After risk of bias assessments (OHAT), studies were grouped according to effects per irrigation solution. Inclusion criteria comprised in vitro studies that used extracted human or bovine teeth, treated by irrigation solutions characterized using FTIR spectroscopy and presenting spectral data. Publications that did not present spectra were excluded.

RESULTS

A wide range of concentrations, durations, and treatment protocols have been tested but only 30 out of 3452 studies met our inclusion criteria. Different FTIR methods were used with Attenuated Total Reflection (ATR) variant being the most common (21 studies). Investigated solutions included sodium hypochlorite (NaOCl), ethylenediaminetetraacetic-acid (EDTA), 1-hydroxyethylidene-1-1-diphosphonic-acid (HEDP), peracetic-acid (PAA), glycolic-acid (GA), and citric-acid (CA) though most focused on NaOCl and EDTA. All solutions had detectable effects in the FTIR signature of dentin. NaOCl mainly affects the organics, revealing reduced amide/phosphate ratios with increasing concentrations. EDTA mainly effects the inorganic component, with the effects increasing with time and concentration, yet glycolic acid has stronger effects than EDTA on dentin. Beyond the type of irrigant and dentin exposure durations, concentration and protocol of application had strong effects. There is a lack of studies comparing similar irrigants under conditions that mimic clinical scenarios analyzing bulk sample because FTIR of powder dentin differs from FTIR of bulk dentin.

SIGNIFICANCE

The ideal root-canal irrigant should combine local disinfection properties with minimal compositional effects on healthy dentin. FTIR methods appear reliable to identify important changes in root dentin chemical composition. Such information can help understand when endodontic irrigation might lead to root degradation or possibly contribute to long term failures such as vertical fractures. Awareness of chemical damage from irrigation procedures may help clinicians select procedures that reduce deleterious effects on the root canal structures.

A variable mineralization time and solution concentration intervene in the microstructure of biomimetic mineralized collagen and potential osteogenic microenvironment

The absence of a conducive bone formation microenvironment between fractured ends poses a significant challenge in repairing large bone defects. A promising solution is to construct a bone formation microenvironment that mimics natural bone tissue. Biomimetic mineralized collagen possesses a chemical composition and microstructure highly similar to the natural bone matrix, making it an ideal biomimetic bone substitute material. The microstructure of biomimetic mineralized collagen is influenced by various factors, and its biomineralization and microstructure, in turn, affect its physicochemical properties and biological activity. We aimed to utilize mineralization time and solution concentration as variables and employed the polymer-induced liquid precursor strategy to fabricate mineralized collagen with diverse microstructures, to shed light on how mineralization parameters impact the material microstructure and physicochemical properties. We also investigated the influence of microstructure and physicochemical properties on cell biocompatibility and the bone-forming microenvironment. Through comprehensive characterization, we examined the physical and chemical properties of I-EMC under various mineralization conditions and assessed the in vitro and in vivo biocompatibility and osteogenic performance. By investigating the relationship between mineralization parameters, material physicochemical properties, and osteogenic performance, we revealed how microstructures influence cellular behaviors like biocompatibility and osteogenic microenvironment. Encouragingly, mineralization solutions with varying concentrations, stabilized by polyacrylic acid, successfully produced intrafibrillar and extrafibrillar mineralized collagen. Compared to non-mineralized collagen, all mineralized samples demonstrated improved bone-forming performance. Notably, samples prepared with a 1× mineralization solution exhibited relatively smooth surfaces with even mineralization. Extending the mineralization time enhanced the degree of mineralization and osteogenic performance. Conversely, samples prepared with a 2× mineralization solution had rough surfaces with large calcium phosphate particles, indicating non-uniform mineralization. Overall, our research advances the potential for commercial production of mineralized collagen protein products, characterized by dual biomimetic properties, and their application in treating various types of bone defects.

Functionalization of biomimetic mineralized collagen for bone tissue engineering

Mineralized collagen (MC) is the basic unit of bone structure and function and is the main component of the extracellular matrix (ECM) in bone tissue. In the biomimetic method, MC with different nanostructures of neo-bone have been constructed. Among these, extra-fibrous MC has been approved by regulatory agencies and applied in clinical practice to play an active role in bone defect repair. However, in the complex microenvironment of bone defects, such as in blood supply disorders and infections, MC is unable to effectively perform its pro-osteogenic activities and needs to be functionalized to include osteogenesis and the enhancement of angiogenesis, anti-infection, and immunomodulation. This article aimed to discuss the preparation and biological performance of MC with different nanostructures in detail, and summarize its functionalization strategy. Then we describe the recent advances in the osteo-inductive properties and multifunctional coordination of MC. Finally, the latest research progress of functionalized biomimetic MC, along with the development challenges and future trends, are discussed. This paper provides a theoretical basis and advanced design philosophy for bone tissue engineering in different bone microenvironments.

Synergistic remineralization of enamel white spot lesions using mesoporous bioactive glasses loaded with amorphous calcium phosphate

Objectives: The purpose of this study was to create a new delivery system that can synergistically remineralize enamel white spot lesions (WSLs). Materials and methods: The delivery system (PAA-ACP@aMBG) was prepared by using aminated mesoporous bioactive glasses (aMBG) as the carrier loaded with polyacrylic-stabilized amorphous calcium phosphate (PAA-ACP). The materials were characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), inductively coupled plasma-optical emission spectrometry (ICP-OES), and so on. Forty-eight artificial WSLs enamel samples were randomized to four groups: artificial saliva (negative control, NC), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), PAA-ACP@aMBG, and MBG. The effects of demineralization and remineralization of the enamel surface were compared by means of surface microhardness (SMH) measurements, surface color change measurements, fluorescence microscopy (FM), X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM). Results: There was no significant difference in the surface microhardness recovery rate (SMHRR) or color recovery rate (CRR) among the CPP-ACP group, PAA-ACP@aMBG group and MBG group (P>0.05), but these values were significantly higher than those in the NC group (p < 0.01). FM demonstrated that the remineralization depth in the PAA-ACP@aMBG group was significantly greater than that of the remaining three groups (p < 0.01). SEM analysis indicated that the enamel demineralization marks in the PAA-ACP@aMBG group, CPP-ACP group, and MBG group were obscured by mineral deposition. Conclusions: PAA-ACP@aMBG showed good mineralization properties, implying its great potential for clinical application.

Copper and cobalt doped bioactive glass-fish dermal collagen electrospun mat triggers key events of diabetic wound healing in full-thickness skin defect model

The wounds arising out of underlying hyperglycemic conditions such as diabetic foot ulcers demand a multifunctional tissue regeneration approach owing to several deficiencies in the healing mechanisms. Herein, four different types of electrospun microfibers by combining Rohu fish skin-derived collagen (Fcol) with a bioactive glass (BAG)/ion-doped bioactive glass, namely, Fcol/BAG, Fcol/CuBAG, Fcol/CoBAG, and Fcol/CuCoBAG was developed to accelerate wound healing through stimulation of key events such as angiogenesis and ECM re-construction under diabetic conditions. SEM analysis shows the porous and microfibrous architecture, while the EDX mapping provides evidence of the incorporation of dopants inside various inorganic-organic composite mats. The viscoelastic properties of the microfibrous mats as measured by a nano-DMA test show a higher damping factor non-uniform tan-delta value. The maximum ultimate tensile strength and toughness are recorded for fish collagen with copper doped bioactive glass microfibers while the least values are demonstrated by microfibers with cobalt dopant. In vitro results demonstrate excellent cell-cell and cell-material interactions when human dermal fibroblasts (HDFs) were cultured over the microfibers for 48 h. When these mats were applied over full-thickness diabetic wounds in the rabbit model, early wound healing is attained with Fcol/CuBAG, Fcol/CoBAG, and Fcol/CuCoBAG microfibers. Notably, these microfibers-treated wounds demonstrate a significantly (p < 0.01) higher density of blood vessels by CD-31 immunostaining than control, Duoderm, and Fcol/BAG treated wounds. Mature collagen deposition and excellent ECM remodeling are also evident in wounds treated with fish collagen/ion-doped bioactive glass microfibers suggesting their positive role in diabetic wound healing.

Engineering Vascularizing Electrospun Dermal Grafts by Integrating Fish Collagen and Ion-Doped Bioactive Glass

Utilizing bioactive molecules from organic sources in combination with inorganic materials for enhanced tissue regeneration has been a focus of recent scientific advancements. Some recent studies showed the potential of some specialized bioactive glass for healing of soft tissues; the role of Rohu (Labeo rohita) skin-derived collagen, a biopolymer in tissue regeneration and cutaneous healing, is yet to be established. So, we have fabricated four different types of electrospun mats as wound dressing materials/dermal grafts by combining locally sourced fish (Rohu) skin-derived collagen with novel composition of bioactive glass (Fcol/BAG) without and with dopants (3% and 5% Cu and Co, respectively and their binary) aimed at achieving an accelerated wound healing. FTIR and EDX mapping indicated successful integration of collagen and ion-doped bioactive glass in electrospun mats. Microfibers' architectural features and composition provided a cytocompatible and nontoxic environment conducive to adhesion, spreading, and proliferation of human dermal fibroblasts in vitro; in addition, they were hemocompatible with rabbit red blood cells. Better cutaneous wound healing in rabbits was achieved by treating with Fcol/CoBAG and Fcol/CuCoBAG microfibers with respect to improved wound closure, well-formed continuous epidermis, higher wound maturity, and regulated deposition of extracellular matrix components; mature collagen and elastin. Notably, a significantly (p < 0.01) higher density of blood vessels/positive CD 31 staining was observed in fish collagen/ion-doped bioactive glass microfibrous mat treated wounds suggesting efficient neo-vascularization during early stages of the healing process particularly attributable to copper and cobalt ions in the doped bioactive glass. Enhanced vascularizing ability of these engineered dermal composite grafts/wound dressings along with efficient remodeling of cutaneous structural components (ECM) could collectively be ascribed to bioactive properties of bioactive glass and stimulatory roles of copper, cobalt ions, and fish collagen. Our study demonstrates that a fish collagen/Cu and Co-doped bioactive glass microfibrous mat could potentially be used as a low-cost dressing material/dermal graft for augmented cutaneous wound healing.

Self-calcifying lipid nanocarrier for bone tissue engineering

BACKGROUND

A nanoemulsion with specific surface properties (such as charge and functional groups) can initiate the deposition of calcium phosphate (CaP) on its surface, leading to formation of CaP nanoparticles with a lipid core. The lipid core can carry lipophilic compounds based on the function of the nanoemulsion. Therefore, a dual purpose nanoemulsion of lipid nanoparticles (LNPs) exhibiting self-calcifying and carrier abilities can be developed.

METHODS

We employed an emulsification process to formulate LNPs with a specific charged surface. The LNPs were tested for their ability to calcify in simulated body fluid and encapsulate cholecalciferol (a model of active compound). The self-calcifying LNP was successfully fabricated using the emulsification process and stabilized using a mixture of polysorbate 80 and polysorbate 20.

RESULTS

The LNPs incubated in simulated body fluid bound to calcium and phosphate, subsequently forming CaP on the particle surface and resulting in approximately 180-nm CaP spheres with a lipid core. The LNPs facilitated calcium phosphate deposition in the collagen scaffolds. In addition, LNPs can be used as carriers of lipophilic compounds without impeding the self-calcifying ability.

Mechanistically Scoping Cell-Free and Cell-Dependent Artificial Scaffolds in Rebuilding Skeletal and Dental Hard Tissues

Rebuilding mineralized tissues in skeletal and dental systems remains costly and challenging. Despite numerous demands and heavy clinical burden over the world, sources of autografts, allografts, and xenografts are far limited, along with massive risks including viral infections, ethic crisis, and so on. Per such dilemma, artificial scaffolds have emerged to provide efficient alternatives. To date, cell-free biomimetic mineralization (BM) and cell-dependent scaffolds have both demonstrated promising capabilities of regenerating mineralized tissues. However, BM and cell-dependent scaffolds have distinctive mechanisms for mineral genesis, which makes them methodically, synthetically, and functionally disparate. Herein, these two strategies in regenerative dentistry and orthopedics are systematically summarized at the level of mechanisms. For BM, methodological and theoretical advances are focused upon; and meanwhile, for cell-dependent scaffolds, it is demonstrated how scaffolds orchestrate osteogenic cell fate. The summary of the experimental advances and clinical progress will endow researchers with mechanistic understandings of artificial scaffolds in rebuilding hard tissues, by which better clinical choices and research directions may be approached.

Calcium-Based Biomineralization: A Smart Approach for the Design of Novel Multifunctional Hybrid Materials

Biomineralization consists of a complex cascade of phenomena generating hybrid nano-structured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce highly biomimetic and biocompatible materials resembling natural hard tissues such as bones and teeth. In detail, biomimetic materials, composed of hydroxyapatite nanoparticles (HA) nucleated on an organic matrix, show extremely versatile chemical compositions and physical properties, which can be controlled to address specific challenges. Indeed, different parameters, including (i) the partial substitution of mimetic doping ions within the HA lattice, (ii) the use of different organic matrices, and (iii) the choice of cross-linking processes, can be finely tuned. In the present review, we mainly focused on calcium biomineralization. Besides regenerative medicine, these multifunctional materials have been largely exploited for other applications including 3D printable materials and in vitro three-dimensional (3D) models for cancer studies and for drug testing. Additionally, biomineralized multifunctional nano-particles can be involved in applications ranging from nanomedicine as fully bioresorbable drug delivery systems to the development of innovative and eco-sustainable UV physical filters for skin protection from solar radiations.

Polyelectrolyte-calcium complexes as a pre-precursor induce biomimetic mineralization of collagen

Polyelectrolytes such as polyaspartic acid (PAsp) are critical in biomimetic mineralization as stabilizers of amorphous calcium phosphate (ACP) precursors and as nucleation inhibitors similar to non-collagenous proteins (NCPs). Nevertheless, the application of polyelectrolyte-calcium complexes as a pre-precursor, such as PAsp-Ca complexes, in the mineralization of collagen is unexplored. Herein, we propose a polyelectrolyte-Ca complex pre-precursor (PCCP) process for collagen mineralization. By combining three-dimensional (3D) STORM, potential measurements, and cryogenic transmission electron microscopy with molecular dynamics simulations, we show that liquid-like electropositive PAsp-Ca complexes along with free calcium ions infiltrate electronegative collagen fibrils. The PAsp-Ca complexes are immobilized within the fibrils via chelation and hydrogen bonds, and outward movement of free calcium ions is prevented while phosphate and hydroxide are recruited through electrostatic attractions. Afterwards, ACP instantly forms and gradually crystallizes. The PCCP process not only unites two distinct crystallization pathways (classical (free Ca/P ions) and non-classical (polyelectrolyte-Ca complexes)), but also provides a novel strategy for rapid biomimetic mineralization of collagen.

Proliferation and Osteogenic Differentiation of hMSCs on Biomineralized Collagen

Biomineralized collagen with intrafibrillar calcium phosphate mineral provides an excellent mimic of the composition and structure of the extracellular matrix of bone, from nano- to micro-scale. Scaffolds prepared from this material have the potential to become the next-generation of synthetic bone graft substitutes, as their unique properties make them closer to the native tissue than synthetic alternatives currently available to clinicians. To understand the interaction between biomineralized collagen and cells that are relevant in the context of bone regeneration, we studied the growth and osteogenic differentiation of bone marrow derived human mesenchymal stromal cells (hMSCs) cultured on biomineralized collagen membranes, and compared it to the cell behavior on collagen membranes without mineral. Cells proliferated normally on both biomimetic membranes, and were more triggered to differentiate toward the osteogenic lineage by the biomineralized collagen. This was shown by the elevated mRNA levels of RUNX2, SPP1, ENPP1, and OCN after 3 days of culture, and COL1A1 after 14 days of culture on mineralized collagen. The mRNA levels of the tested markers of osteogenesis were lower on collagen membranes without mineral, with the exception of OCN, which was more highly expressed on collagen than on biomineralized collagen membranes. Expression by hMSCs of OPG, a gene involved in inhibition of osteoclastogenesis, was higher on biomineralized collagen at day 3, while M-CSF, involved in osteoblast-osteoclast communication, was upregulated on both membranes at day 3 and 14 of culture. Alkaline phosphatase activity of hMSCs was high on both biomimetic membranes when compared with cells cultured on tissue culture plastic. Cell-induced mineralization was observed on collagen membranes, while the high mineral content of the biomineralized membranes prohibited a reliable analysis of cell-induced mineralization on these membranes. In conclusion, we have identified that both collagen and biomineralized collagen support proliferation, osteogenic differentiation and mineralization of hMSCs, with biomineralized membranes having a more pronounced positive effect. These findings support the existing evidence that biomineralized collagen is a promising material in the field of bone regeneration.

A novel method to improve the osteogenesis capacity of hUCMSCs with dual-directional pre-induction under screened co-culture conditions

OBJECTIVES

Mesenchymal stem cells (MSCs) based therapy for bone regeneration has been regarded as a promising method in the clinic. However, hBMSCs with invasive harvesting process and undesirable proliferation rate hinder the extensive usage. HUCMSCs of easier access and excellent performances provide an alternative for the fabrication of tissue-engineered bone construct. Evidence suggested the osteogenesis ability of hUCMSCs was weaker than that of hBMSCs. To address this issue, a co-culture strategy of osteogenically and angiogenically induced hUCMSCs has been proposed since thorough vascularization facilitates the blood-borne nutrition and oxygen to transport in the scaffold, synergistically expediting the process of ossification.

MATERIALS AND METHODS

Herein, we used osteogenic- and angiogenic-differentiated hUCMSCs for co-culture in screened culture medium to elevate the osteogenic capacity with in vitro studies and finally coupled with 3D TCP scaffold to repair rat's critical-sized calvarial bone defect. By dual-directional induction, hUCMSCs could differentiate into osteoblasts and endothelial cells, respectively. To optimize the co-culture condition, gradient ratios of dual-directional differentiated hUCMSCs co-cultured under different medium were studied to determine the appropriate condition.

RESULTS

It revealed that the osteogenic- and angiogenic-induced hUCMSCs mixed with the ratio of 3:1 co-cultured in the mixed medium of osteogenic induction medium to endothelial cell induction medium of 3:1 possessed more mineralization nodules. Similarly, ALP and osteogenesis/angiogenesis-related genes expressions were relatively higher. Further evidence of bone defect repair with 3D printed TCP of 3:1 group exhibited better restoration outcomes.

CONCLUSIONS

Our work demonstrated a favourable and convenient approach of dual-directional differentiated hUCMSCs co-culture to improve the osteogenesis, establishing a novel way to fabricate tissue-engineered bone graft with 3D TCP for large bone defect augmentation.

The influence of osteopontin-guided collagen intrafibrillar mineralization on pericyte differentiation and vascularization of engineered bone scaffolds

Biomimetically mineralized collagen scaffolds are promising for bone regeneration, but vascularization of these materials remains to be addressed. Here, we engineered mineralized scaffolds using an osteopontin-guided polymer-induced liquid-precursor mineralization method to recapitulate bone's mineralized nanostructure. SEM images of mineralized samples confirmed the presence of collagen with intrafibrillar mineral, also EDS spectra and FTIR showed high peaks of calcium and phosphate, with a similar mineral/matrix ratio to native bone. Mineralization increased collagen compressive modulus up to 15-fold. To evaluate vasculature formation and pericyte-like differentiation, HUVECs and hMSCs were seeded in a 4:1 ratio in the scaffolds for 7 days. Moreover, we used RT-PCR to investigate the gene expression of pericyte markers ACTA2, desmin, CD13, NG2, and PDGFRβ. Confocal images showed that both nonmineralized and mineralized scaffolds enabled endothelial capillary network formation. However, vessels in the nonmineralized samples had longer vessel length, a larger number of junctions, and a higher presence of αSMA+ mural cells. RT-PCR analysis confirmed the downregulation of pericytic markers in mineralized samples. In conclusion, although both scaffolds enabled endothelial capillary network formation, mineralized scaffolds presented less pericyte-supported vessels. These observations suggest that specific scaffold characteristics may be required for efficient scaffold vascularization in future bone tissue engineering strategies. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1522-1532, 2019.

An in vitro study on dentin demineralization and remineralization: Collagen rearrangements and influence on the enucleated phase

Dentin remineralization is of clinical relevance in the therapy of caries and dentin hypersensitivity. This study is aimed at gaining more insights on a molecular scale, through IR spectroscopy, into dentin demineralization and remineralization. The dentin demineralization by ethylenediaminetetraacetic acid, EDTA (17%, 2 h) significantly altered the secondary structure distribution of collagen, upon loss of interaction with calcium ions. To investigate dentin remineralization, previously demineralized human dentin slices were soaked in Dulbecco's Phosphate Buffered Saline (DPBS) or Hank's Balanced Salt Solution HBSS, in close contact with three commercial cements used as sustained releasing sources of Ca²⁺ and OH^- ions (i.e. calcium hydroxide- and calcium silicate-based cements). IR spectroscopy showed the occurrence of remineralization under these conditions. Collagen did not lose its ability to chelate Ca²⁺, and these interactions allowed collagen to rearrange into a conformation similar to that of sound dentin. This process appeared slower in HBSS than DPBS, as also shown by the lower degree of maturation of the inorganic phase enucleated in the former medium (amorphous calcium phosphate versus B-type carbonated apatite). Collagen appeared to act as a spatial constraint to crystal deposition, affecting crystallinity and carbonate content of the enucleated phase. Remineralization was found to strongly depend on the calcium releasing ability of the cements. The fast formation of a rough apatite biocoating may represent a favorable clinical condition in the context of mineralized tissue regeneration.

Effect of strontium substitution on the material properties and osteogenic potential of 3D powder printed magnesium phosphate scaffolds

3D powder printing is a versatile method for the fabrication of individual bone implants and was used for the processing of in vivo degradable ceramic scaffolds based on ammonium magnesium phosphate hexahydrate (struvite). In this study, synergetic effects could be achieved by the substitution of magnesium phosphate cements with strontium carbonate. This substitution resulted in 8.2 wt%, 16.4 wt%, and 24.6 wt% Sr²⁺ doped scaffolds, with a 1.9-3.1 times increased radiopacity compared to pure struvite. The maximal compressive strength of (16.1 ± 1.1) MPa found for strontium substituted magnesium phosphate was in the range of cancelleous bone, which makes these 3D printed structures suitable for medical application in low-load-bearing bone areas. In an ion release study over a course of 18 days, the release of strontium, magnesium, calcium, and phosphate ions from scaffolds was analyzed by means of inductively coupled plasma mass spectrometry. Independent of the scaffold composition the Mg²⁺ concentrations (83-499 mg/l) continuously increased in the cell media. The Sr²⁺ release varied between 4.3 μg/day and 15.1 μg/day per g scaffold, corresponding to a Sr²⁺ concentration in media between 1.14 mg/l and 7.24 mg/l. Moreover, decreasing calcium and phosphate concentrations indicated the precipitation of an amorphous calcium phosphate phase. The superior osteogenic properties of strontium substituted magnesium phosphate, e.g. the increase of osteoblast activity and cell number and the simultaneous suppression of osteoclast differentiation could be verified in vitro by means of WST-assay, TRAP-staining, and SEM imaging.

Fish Collagen Surgical Compress Repairing Characteristics on Wound Healing Process In Vivo

The development of biomaterials with the potential to accelerate wound healing is a great challenge in biomedicine. In this study, four types of samples including pepsin soluble collagen sponge (PCS), acid soluble collagen sponge (ACS), bovine collagen electrospun I (BCE I) and bovine collagen electrospun II (BCE II) were used as wound dressing materials. We showed that the PCS, ACS, BCE I and BCE II treated rats increased the percentage of wound contraction, reduced the inflammatory infiltration, and accelerated the epithelization and healing. PCS, ACS, BCE I, and BCE II significantly enhanced the total protein and hydroxyproline level in rats. ACS could induce more fibroblasts proliferation and differentiation than PCS, however, both PCS and ACS had a lower effect than BCE I and BCE II. PCS, ACS, BCE I, and BCE II could regulate deposition of collagen, which led to excellent alignment in the wound healing process. There were similar effects on inducing the level of cytokines including EGF, FGF, and vascular endothelial marker CD31 among these four groups. Accordingly, this study disclosed that collagens (PCS and ACS) from tilapia skin and bovine collagen electrospun (BCE I and BCE II) have significant bioactivity and could accelerate wound healing rapidly and effectively in rat model.

Biomineralization-Inspired Material Design for Bone Regeneration

Synthetic substitutes of bone grafts, such as calcium phosphate-based ceramics, have shown some good clinical successes in the regeneration of large bone defects and are currently extensively used. In the past decade, the field of biomineralization has delivered important new fundamental knowledge and techniques to better understand this fascinating phenomenon. This knowledge is also applied in the field of biomaterials, with the aim of bringing the composition and structure, and hence the performance, of synthetic bone graft substitutes even closer to those of the extracellular matrix of bone. The purpose of this progress report is to critically review advances in mimicking the extracellular matrix of bone as a strategy for development of new materials for bone regeneration. Lab-made biomimicking or bioinspired materials are discussed against the background of the natural extracellular matrix, starting from basic organic and inorganic components, and progressing into the building block of bone, the mineralized collagen fibril, and finally larger, 2D and 3D constructs. Moreover, bioactivity studies on state-of-the-art biomimicking materials are discussed. By addressing these different topics, an overview is given of how far the field has advanced toward a true bone-mimicking material, and some suggestions are offered for bridging current knowledge and technical gaps.

Amorphous calcium phosphate (ACP) in tissue repair process

Synthetic biomaterials submitted to new structural technologies have become ideal for the recovery of traumatized bone tissues and some bone substitutes such as bioactive glass, β-Tricalcium phosphate (β-TCP) and amorphous calcium phosphate (ACP) are being used in areas of tissue defects. For this study, ACP was produced in the form of fibers and then submitted to cytotoxicity testing. A sample of ACP was inserted into the mandibular region of a patient with a lost implant so after removal and curettage, the remaining bone site was filled with the ACP biomaterial. Preliminary cytotoxicity test was negative. After 15 weeks of healing, a titanium implant was inserted at the site. Clinical and radiographic follow-up was conducted for 12 months and sequential radiographic analyses revealed tissue formation resembling spongy bone. Images under immunohistochemistry demonstrated efficient deposition and osteoconduction of the newly deposited tissue. Residual portion of the CaO:P₂ O₅ outer layers served as a substrate for osteoid matrix deposition, aiding growth, and the results of fiber absorption favored maturation of the new bone tissue.

Spatial charge manipulated set-selective apatite deposition on micropatterned piezoceramic

Apatite was selectively deposited with the manipulation of spatial charge on the micropatterned piezoelectric K_0.5Na_0.5NbO₃.

From molecules to macrostructures: recent development of bioinspired hard tissue repair

This review summarizes the bioinspired strategies for hard tissue repair, ranging from molecule-induced mineralization, to microscale assembly to macroscaffold fabrication.