Microwave assisted extraction as an efficient approach for biosynthesis of zinc oxide nanoparticles: Synthesis, characterization, and biological properties

Synergistic action of sumatriptan delivery and targeting magnesium deficiency using green, pH-responsive MgO nanoparticles synthesized from mahua flower extracts

Magnesium oxide (MgO) nanoparticles were green synthesized using mahua (Madhuca longifolia) flower extracts by solvent evaporation and characterized by UV-visible spectroscopy, X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), Field emission scanning electron microscopy (FESEM), and Energy dispersive X-ray analysis (EDX). The drug loading of sumatriptan succinate (SS), an anti-migraine drug, was optimized using MINITAB's response surface methodology (RSM) Box Behnken model (BBD) model. The investigation of drug adsorption and release kinetics was further conducted using the optimized set obtained through RSM. The optimized parameters consisted of 23.53 mg of nanoparticles, a loading time of 6 h, and a pH of 9, yielding the experimental drug loading efficiency ~47%. The primary objective of this study is to investigate the potential of utilizing these green synthesized MgO nanoparticles for a dual purpose. The primary objective of this study is to investigate the viability of utilizing MgO nanoparticles synthesized through green route for the delivery of an anti-migraine medication. Additionally, the study aims to examine the degradation of these nanoparticles at physiological pH levels, with the intention of potentially enhancing cellular absorption. The investigation involved the assessment of drug release kinetics using various mathematical models, with a focus on the release of SS from MgO nanoparticles. This evaluation was conducted at different pH levels, specifically pH 5, 7, and 9. It has been found that the SS release increases as pH decreases, which is attributed to the dissolution of MgO nanoparticles, which therefore exhibits varied behavior at different pHs. The confirmation of the degradation of the green synthesized MgO nanoparticles was achieved through the execution of a degradation study, followed by the analysis of the obtained samples using FESEM and EDS. At neutral, the release data obtained adhered to the Higuchi model, which suggests that the release of the drug is based on diffusion. This finding is particularly advantageous for the controlled release of an anti-migraine drug. The results obtained from the study indicate that MgO nanoparticles have the potential to serve as a significant component in drug delivery systems, specifically as drug carriers.

Optical tuning of polymer functionalized zinc oxide quantum dots as a selective probe for the detection of antibiotics

Excess consumption of antibiotics leads to antibiotic resistance that hinders the control and cure of microbial diseases. Therefore, it is crucial to monitor the antibiotic levels in the environment. In this proposed research work, an optical nano-sensor was devised that can sense the ultra-low concentration of antibiotics, in samples like tap water using fluorescent zinc oxide quantum dots (ZnO QDs) based nano-sensor. For this, different polymers (polyvinylalcohol-PVA and polyvinylpyrrolidine-PVP) capped florescent ZnO QDs were synthesized using a modified sol-gel technique. These were used as fluorescent probes to monitor the presence of antibiotics. The optical characterizations of synthesized QDs were performed using UV-visible absorption and fluorescence spectroscopic methods while structural characteristics were analyzed by using Raman spectroscopy and X-ray diffraction spectroscopy. The formation of capped QDs was confirmed by Fourier transform infrared spectroscopy (FTIR). Charge on the synthesized QDs was obtained with the help of ZETA potential. Here ten different antibiotics were checked, Ciprofloxacin and Moxifloxacin have shown excellent sensing and specificity with PVA-ZnO QDs and PVP-ZnO QDs with LOD of 1.4 nM and 0.8 nM, and sensitivity of 36.17 units/mM and 19.33 units/mM respectively. This study also inferred the tuning of the ZnO QDs properties and specificity towards the different antibiotics can be achieved by capping QDs with different polymers.

Microbial assisted alleviation of nickel toxicity in plants: A review

Nickel (Ni) is required in trace amounts (less than 500 µg kg-1) in plants to regulate metabolic processes, the immune system, and to act as an enzymatic catalytic cofactor. Conversely, when nickel is present in high concentration, it is considered as a toxic substance. Excessive human nickel exposure occurs through ingestion, inhalation, and skin contact, ultimately leading to respiratory, cardiovascular, and chronic kidney diseases. Due to anthropogenic activities, the nickel concentrations in various environmental scenarios have progressively risen to levels as high as 26,000 ppm in soil and 0.2 mg L-1 in water; surpassing the established safety threshold limits of 100 ppm for soil and 0.005 ppm for surface water. Nickel is required by various plant species for facilitating biological processes; in the range of 0.01-5 µg g-1 (dry weight). When present in excess, nickel toxicity in plants (10-1000 mg kg-1 dry weight mass) causes many disrupted metabolic processes; leading to lower growth, altered development, hindered seed germination, chlorosis, and necrosis. To tackle any metal-linked pollution issues, various remediation approaches are employed to remove heavy metals (especially nickel) and metalloids including physicochemical, and biological methods. Based on literature, the physicochemical methods are not commonly used due to their costly nature and the potential for producing secondary pollutants. Interestingly, bioremediation is considered by many practitioners as an easy-to-handle, efficient, and cost-effective approach, encompassing techniques such as phytoremediation, bioleaching, bioreactors, green landforming, and bio-augmentation. Operationally, phytoremediation is widely utilized for cleaning up contaminated sites. To support the phytoremediative processes, numerous nickel hyperaccumulating plants have been identified; these species can absorb from their surroundings and store high concentrations of nickel (through various mechanisms) in their biomass, thereby helping to detoxify nickel-contaminated soils via phytoextraction. The microbe-assisted phytoremediation further optimizes the nickel detoxification processes by fostering beneficial interactions between microbes and the nickel-hyperaccumulators; promoting enhanced metal uptake, transformation, and sequestration. Microbe-assisted phytoremediation can be categorized into four subtypes: bacterial-assisted phytoremediation, cyanoremediation, mycorrhizal-assisted remediation, and rhizoremediation. These diverse approaches are likely to offer more effective and sustainable remediative strategy to ecologically restore the nickel-contaminated environments.

Plant-mediated synthesis of zinc oxide (ZnO) nanoparticles using Alnus nepalensis D. Don for biological applications

An aqueous bark extract of A. nepalensis D. Don was utilized to prepare zinc oxide (ZnO) nanoparticles through a green method, which is more economical, eco-friendly, and effective for exploring several biological applications and toxicity assessments against brine shrimp nauplii. The prepared ZnO nanoparticles were characterized using several characterizing techniques. The surface morphology and the elemental composition of the prepared ZnO NPs was analyzed by field emission scanning electron microscopy (FE-SEM), and energy dispersive X-ray (EDX) analysis. The colour of the solution was changed from reddish-brown to white indicating the formation of ZnO NPs which shows UV-vis absorption at 361 nm. The various functional groups of the organic compounds present in plant extract act as reducing and stabilizing agents in the formation of nanoparticles. The involvement of these functionalities in the formation of nanoparticles is indicated by the shifts and changes in the IR spectra of both the plant extract and the ZnO nanoparticles. The size of the nanoparticles was determined to be 15.31 nm with XRD analysis while the FE-SEM revealed the average grain size of 67.29 nm with irregular shape. The elemental composition of ZnO NPs shows a greater atomic percentage of zinc compared to other elements (C, N, Ni, O, and Ag), with an intense peak of zinc observed at approximately 1 keV. The trace amount of silver is due to the impurities present in the reagent used in the experiment. The antioxidant property of ZnO nanoparticles was evaluated with an IC₅₀ of 53.02 ± 3.43 μg/mL. The ZnO nanoparticles exhibited significant antibacterial activity against Klebsiella pneumoniae and Escherichia coli, with zones of inhibition (ZOI) of 18 mm and 23 mm, respectively as compared to the positive control neomycin of ZOI 28 mm against K. pneumoniae. The potential antibacterial activity of the ZnO NPS was revealed as the MIC and MBC against K. pneumoniae of 0.39 mg/mL and 0.78 mg/mL, respectively. In addition, the prepared ZnO nanoparticles showed toxicity against brine shrimp nauplii of LC₅₀ 16.59 μg/mL. The results of this study impart that plant-assisted synthesized ZnO nanoparticles possess significant antibacterial properties that reduce oxidative stress in human cells, ultimately contributing to cancer prevention.

Magnetic sporopollenin supported magnesium nanoparticles for removal of tetracycline as an emerging contaminant from water

Since the release of antibiotics as emerging contaminants into the environmental water can cause severe difficulties for human health, their removal from the water is necessary. In this regard, a novel environmentally friendly adsorbent was developed based on green sporopollenin, which was magnetized and modified with magnesium oxide nanoparticles to produce MSP@MgO nanocomposite. The newly developed adsorbent was applied to remove tetracycline antibiotic (TC) from aqueous media. The surface morphology of the MSP@MgO nanocomposite was characterized using FTIR, XRD, EDX, and SEM techniques. The effective parameters of the removal process were studied, and it was confirmed that the chemical structure of TC was highly affected by changes in pH solution due to different pKa; therefore, the results showed that pH 5 was the optimum. Also, the maximum sorption capacity of MSP@MgO for TC for adsorption was obtained at 109.89 mg.g-1. In addition, the adsorption models were investigated, and the process was fitted with the Langmuir model. Thermodynamic parameters showed that the process was spontaneous (ΔG < 0), endothermic (ΔH > 0) and the adsorption mechanism was following the physisorption mechanism at room temperature.

Nanotechnology in the Diagnosis and Treatment of Antibiotic-Resistant Infections

The development of antimicrobial resistance (AMR), along with the relative reduction in the production of new antimicrobials, significantly limits the therapeutic options in infectious diseases. Thus, novel treatments, especially in the current era, where AMR is increasing, are urgently needed. There are several ongoing studies on non-classical therapies for infectious diseases, such as bacteriophages, antimicrobial peptides, and nanotechnology, among others. Nanomaterials involve materials on the nanoscale that could be used in the diagnosis, treatment, and prevention of infectious diseases. This review provides an overview of the applications of nanotechnology in the diagnosis and treatment of infectious diseases from a clinician's perspective, with a focus on pathogens with AMR. Applications of nanomaterials in diagnosis, by taking advantage of their electrochemical, optic, magnetic, and fluorescent properties, are described. Moreover, the potential of metallic or organic nanoparticles (NPs) in the treatment of infections is also addressed. Finally, the potential use of NPs in the development of safe and efficient vaccines is also reviewed. Further studies are needed to prove the safety and efficacy of NPs that would facilitate their approval by regulatory authorities for clinical use.

Biological Activities of Zinc Oxide Nanoparticles Green Synthesized Using the Aqueous Extract of Dracocephalum kotschyi Boiss

BACKGROUND

Dracocephalum kotschyi Boiss. is known as a native medicinal plant of Iran.

OBJECTIVE

In this study, aqueous extract of D. kotschyi was used to synthesize ZnO-NPs. To produce ZnO-NPs, aerial parts of D. kotschyi were powdered and then macerated for obtaining aqueous extract, after that, aqueous extract was used to reduse zinc nitrate to ZnO-NPs.

METHODS

To confirm nanoparticles synthesis, SEM, TEM, UV-Vis, FTIR, and XRD were used. The synthesized ZnO-NPs were studied for antimicrobial activities by microdilution method for calculating MIC and MBC. Analysis of ZnO-NPs confirmed successful synthesis by extract of D. kotschyi.

RESULTS

The sizes of ZnO-NPs were estimated 50-200 nm in diameter. Antibacterial and antifungal experiments showed potent activities against Staphylococos aureus, Pseudomonas aeruginosa and Candida albicans. The results of the studies showed that the nanoparticles synthesized with the aqueous extract of D. kotschyi have a much greater antimicrobial effect than the aqueous extract of D. kotschyi and zinc nanoparticles, each alone (MIC values 3.7 to 7.5 mg/ml).

CONCLUSION

The noteworthy point is that the inhibitory rate of synthesized zinc oxide nanoparticles is higher compared to broad-spectrum antibiotics, such as chloramphenicol (MIC values 15 mg/ml). Determining the therapeutic and toxic dose of this product for humans requires further investigation and clinical trials.

Sonochemical-assisted synthesis of copper oxide nanoparticles with the plant-mediated approach and comparative evaluation of some biological activities

The present study reported a green approach for the sonochemical-assisted synthesis (SAS) of copper oxide nanoparticles (CuO NPs) by using the aqueous extract of the Ficus johannis plant. The aqueous extract was obtained using ultrasonic-assisted extraction (15 min, 45 °C) and microwave-assisted extraction (15 min, 450 w). Next, the as-prepared extracts were used in a plant-mediated approach for the green synthesis of CuO NPs. The synthesized CuO NPs have been characterized via different techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), dynamic light scattering (DLS), ultraviolet-visible absorption, photoluminescence, and Fourier-transformed infrared (FT-IR) spectroscopic techniques. As observed, a broad absorption band around 375 nm clarified the successful synthesis of CuO NPs. From the SEM analysis, the average particle size of the prepared CuO NPs was estimated below 50 nm. In addition, the antimicrobial, antioxidant, and antifungal properties of the aqueous extracts as well as the as-prepared CuO NPs were evaluated by different assays. These included the release of protein, nucleic acids, disk diffusion method, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC), and time-killing assays.

Facile biosynthesis of Ag-ZnO nanocomposites using Launaea cornuta leaf extract and their antimicrobial activity

The quest to synthesize safe, non-hazardous Ag-ZnO nanoomposites (NCs) with improved physical and chemical properties has necessitated green synthesis approaches. In this research, Launaea cornuta leaf extract was proposed for the green synthesis of Ag-ZnO NCs, wherein the leaf extract was used as a reducing and capping agent. The antibacterial activity of the prepared nanoomposites was investigated against Escherichia coli and Staphylococcus aureus through the disc diffusion method. The influence of the synthesis temperature, pH, and precursor concentration on the synthesis of the Ag-ZnO NCs and antimicrobial efficacy were investigated. The nanoparticles were characterized by ATR-FTIR, XRD, UV-Vis, FESEM, and TEM. The FTIR results indicated the presence of secondary metabolites in Launaea cornuta which assisted the green synthesis of the nanoparticles. The XRD results confirmed the successful synthesis of crystalline Ag-ZnO NCs with an average particle size of 21.51 nm. The SEM and TEM images indicated the synthesized nanoparticles to be spherical in shape. The optimum synthesis conditions for Ag-ZnO NCs were at 70 °C, pH of 7, and 8% silver. Antibacterial activity results show Ag-ZnO NCs to have higher microbial inhibition on E. coli than on S. aureus with the zones of inhibition of 21 ± 1.08 and 19.67 ± 0.47 mm, respectively. Therefore, the results suggest that Launaea cornuta leaf extract can be used for the synthesis of Ag-ZnO NCs.

Mycosynthesis of Zinc Oxide Nanoparticles Exhibits Fungal Species Dependent Morphological Preference

Filamentous fungi can synthesize a variety of nanoparticles (NPs), a process referred to as mycosynthesis that requires little energy input, do not require the use of harsh chemicals, occurs at near neutral pH, and do not produce toxic byproducts. While NP synthesis involves reactions between metal ions and exudates produced by the fungi, the chemical and biochemical parameters underlying this process remain poorly understood. Here, the role of fungal species and precursor salt on the mycosynthesis of zinc oxide (ZnO) NPs is investigated. This data demonstrates that all five fungal species tested are able to produce ZnO structures that can be morphologically classified into i) well-defined NPs, ii) coalesced/dissolving NPs, and iii) micron-sized square plates. Further, species-dependent preferences for these morphologies are observed, suggesting potential differences in the profile or concentration of the biochemical constituents in their individual exudates. This data also demonstrates that mycosynthesis of ZnO NPs is independent of the anion species, with nitrate, sulfate, and chloride showing no effect on NP production. These results enhance the understanding of factors controlling the mycosynthesis of ceramic NPs, supporting future studies that can enable control over the physical and chemical properties of NPs formed through this "green" synthesis method.

Plant-assisted synthesis and characterization of MnO2 nanoparticles for removal of crystal violet dye: an environmental remedial approach

The current study is focused on the use of the Caryota mitis Lour. (Fishtail palm) flower extract as a reducing agent for the preparation of manganese dioxide (MnO₂) nanoparticles. Scanning electron microscopy (SEM), four-phase infrared analysis (FT-IR), and x-ray diffraction (XRD) methods were used to characterize the MnO₂ nanoparticles. The nature of MnO₂ nanoparticles was revealed by an absorption peak at 590 nm in a spectrophotometer (A1000). Then, these MnO₂ nanoparticles were applied to decolorize the crystal violet dye. At 0.004% dye concentration, pH 4, and concentration of MnO₂ nanoparticles of 0.005 g/L at temperatures of 50 °C, the target dye was decolorized by 91.3%. Percent reductions in COD and TOC were found to be 92.1% and 90.6%, respectively. Finally, the dye decolorization pathway was proposed based on the experimental findings.

Cytotoxic, Antidiabetic, and Antioxidant Study of Biogenically Improvised Elsholtzia blanda and Chitosan-Assisted Zinc Oxide Nanoparticles

In the present study, we have improvised a biogenic method to fabricate zinc oxide nanoparticles (ZnO NPs) using chitosan and an aqueous extract of the leaves of Elsholtzia blanda. Characterization of the fabricated products was carried out with the help of ultraviolet-visible, Fourier transform infrared, X-ray diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, selected area electron diffraction, and energy-dispersive X-ray analyses. The size of the improvised ZnO NP measured between 20 and 70 nm and had a spherical and hexagonal shape. The ZnO NPs proved to be highly effective in the antidiabetic test as the sample showed the highest percentage of enzyme inhibition at 74% ± 3.7, while in the antioxidant test, 78% was the maximum percentage of 2,2-diphenyl-1-picrylhydrazyl hydrate scavenging activity. The cytotoxic effect was investigated against the human osteosarcoma (MG-63) cell line, and the IC₅₀ value was 62.61 μg/mL. Photocatalytic efficiency was studied by the degradation of Congo red where 91% of dye degradation was observed. From the various analyses, it can be concluded that the as-synthesized NPs may be suitable for various biomedical applications as well as for environmental remediation.

Photo-catalytic and biomedical applications of one-step, plant extract-mediated green-synthesized cobalt oxide nanoparticles

In the present work, for the first time, green chemically synthesized and stabilized Co₃O₄ nanoparticles were employed for catalytic conversion of isopropyl alcohol to acetone by dehydrogenation of IPA. Plant extract of Rosmarinus officinalis was used as a reducing and stabilizing agent for this synthesis. The biosynthesized Co₃O₄ nanoparticles were annealed at 450℃ followed by their physiochemical characterizations through XRD, SEM, AFM, and FTIR. Size distribution information collected through XRD and AFM back each other, and it was found to be 6.5 nm, having the highest number of nanoparticles in this size range. While SEM confirms the self-arranging property of synthesized nanoparticles due to their magnetic nature, furthermore, the biogenic Co₃O₄ nanoparticles were studied for their catalytic potential to convert isopropyl alcohol to acetone with the help of a UV-Visible spectrophotometer. The highest photocatalytic conversion of 99% was obtained in time period of 48 s. For the first time ever, nanoparticles were used for 5 cycles to evaluate their recyclable nature and conversion fell from 99 to 86% and the end of the 5th cycle. Later anti-bacterial activity against 3 Gram-positive and 3 Gram-negative strains gave the highest inhibition value of 99% against Streptococcus pneumoniae at 500 µg/mL. Finally, a cytotoxicity study on synthesized nanomaterials was carried out by exposing freshly drawn human macrophages to them. It was found that even at the highest concentration of 500 µg/mL, the nanoparticles showed only 28% lysis.

Sulfide-Doped Magnetic Carbon Nanotubes Developed as Adsorbent for Uptake of Tetracycline and Cefixime from Wastewater

In this study, a magnetic solid-phase extraction method was developed based on multi-wall carbon nanotubes decorated by magnetic nanoparticles (Fe₃O₄) and cadmium sulfide nanoparticles (Fe₃O₄@MWCNT-CdS) for trace extraction of cefixime and tetracycline antibiotics from urine and drug company wastewater. The adsorbent features were characterized by Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscope (FESEM), and energy dispersive X-ray analysis (EDX). Various effective parameters on the sorption and desorption cycle, such as sorption time, the mass of adsorbent, pH, salt addition, and material ratio, were investigated and optimized. The data were evaluated using isotherm models, and experimental data were well-fitted to both Langmuir (R² = 0.975) and Freundlich (R² = 0.985) models. Moreover, kinetic of reaction was agreement with pseudo-second-order (R² = 0.999) as compared pseudo-first-order (R² = 0.760). The maximum adsorption capacity for tetracycline and cefixime was achieved at 116.27 and 105.26 mg·g^-1, respectively. Hence, the prepared adsorbent can be used as an alternative material for enhanced determination of pharmaceutical substances in biological fluids.

In situ facile green synthesis of Ag-ZnO nanocomposites using Tetradenia riperia leaf extract and its antimicrobial efficacy on water disinfection

In this work, Ag–ZnO nanocomposites were prepared by a green synthesis route using aqueous leaf extract of Tetradenia riperia and investigated for antibacterial activity against Escherichia coli and Staphylococcus aureus. To optimize the synthesis of the Ag–ZnO, the effects of precursor concentrations, pH, and temperatures were studied. The Ag–ZnO nanocomposites were characterized by XRD, ATR-FTIR, FESEM, and TEM. Results show that the concentration of 8% Ag, the temperature of 80 °C, and a pH of 7–8 were optimal for the synthesis of Ag–ZnO nanocomposites. The XRD analysis showed the decrease in particle size of Ag–ZnO from 23.6 to 14.8 nm with an increase in Ag concentrations, which was further supported by FESEM analysis. TEM image of 8% Ag provides more information on the coexistence of Ag on ZnO where an average particle size of 14.8 nm was determined. The ATR-FTIR analysis confirmed the presence of phenolic compounds, which work as reducing and stabilizing agents. The antimicrobial activity results show that Ag–ZnO nanocomposite demonstrated a higher antimicrobial potency on E. coli than on S. aureus. Therefore, Tetradenia riperia leaf extract is a viable route for the synthesis of Ag–ZnO nanocomposites to be used for various applications, including water disinfection.

Very rapid synthesis of highly efficient and biocompatible Ag2Se QD phytocatalysts using ultrasonic irradiation for aqueous/sustainable reduction of toxic nitroarenes to anilines with excellent yield/selectivity at room temperature

There are many problems associated with the synthesis of nanocatalysts and catalytic reduction of nitroarenes - e.g., high temperatures, costs, long reaction/synthesis process times, the toxicity of chemicals/solvents, undesirable byproducts, the toxic/harmful wastes, low efficiency/selectivity, etc. This study represents an attempt to overcome these challenges. To this purpose, biocompatible and highly efficient Ag₂Se quantum dots (QDs) catalysts with antibacterial activity were synthesized in a very rapid (30 sec, rt), simple, inexpensive, sustainable/green, and one-pot strategy in water using ultrasonic irradiation. Characterization of the QDs was performed using different techniques. UV-Vis absorption and fluorescence spectroscopic studies showed an absorption peak at 480-550 nm and a maximum emission peak around 675 nm, which confirmed the successful synthesis of Ag₂Se QDs via the applied biosynthetic method. Subsequently, catalytic reduction of nitroarenes by them was carried out under safe conditions (H₂O, rt, air atmosphere) in ∼ 60 min with excellent yield and selectivity (>99%). Their catalytic activity in the reduction of various toxic nitroarenes to aminoarenes under green conditions was investigated. Thus, a rapid and safe ultrasound-based method was employed to prepare stable and green Ag₂Se QDs phyto-catalysts with unique properties, including exquisite monodispersity in shape (orthorhombic) and size (∼7 nm), air-stability, and good purity and crystallinity. Importantly, instead of various toxic chemicals, the plant extract obtained by rapid ultrasonic method (10 min, rt) was used as natural reducing, capping, and stabilizing agents. Moreover, antibacterial assays results showed that Ag₂Se-QDs catalysts at low concentrations (ppm) have high activity against all tested bacteria, especially E. coli (MIC:31.25 ppm, MBC:125 ppm) which were significantly different from those of Fig extract (MIC = MBC:500 ppm). The data reflect the role of these bio-synthesized Ag₂Se-QDs catalysts in the development of versatile and very safe catalysts with biomedical properties.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

A benzothiazole-based new fluorogenic chemosensor for the detection of CN- and its real-time application in environmental water samples and living cells

Since the cyanide ion is used in a wide range of industries and is harmful to both human health and the environment, a number of research efforts are dedicated to creating fluorescence sensors for the detection of cyanide (CN-). Herein, for the fluorescence detection of CN-, a new highly selective and sensitive sensor 2-(3-(benzo[d]thiazol-2-yl)-4-hydroxybenzylidene)-1H-indene-1,3(2H)-dione (BID) was created by conjugating a benzothiazole moiety with 1H-indene-1,3(2H)-dione. The donor and acceptor components of this hybrid receptor were covalently connected through a double bond. The nucleophilic addition of a cyanide anion to the BID inhibits the intramolecular charge transfer (ICT) transition, resulting in spectral and colour alterations in the receptor. When the solvent polarity was increased from n-hexane to methanol, this molecule exhibited a bathochromic shift in the emission wavelength (610 to 632 nm), suggesting the presence of a solvatochromic action. The sensor BID has shown strong specificity towards CN- by interrupting its internal charge transfer (ICT), resulting in a significant change in the UV-vis spectrum and a notable blue shift in the fluorescence emission spectrum. The cyanide anion (CN-) is responsible for the optical alterations observed by BID, as opposed to the other anions examined. The detection limit was 5.97 nM, significantly less than the WHO's permitted amount of CN- in drinking water. The experimental findings indicate that BID's fluorescence response to CN- is pH insensitive throughout a wide pH range of 6.0 to 12.0. The interaction mechanism between the BID and CN- ions has been studied by HRMS, 1H-NMR titration experiments, FT-IR, and DFT, which confirmed the nucleophilic addition of CN- on vinylidene and subsequent disturbance of ICT. Additionally, we demonstrated the real-time detection application of CN- in environmental water samples and live-cell imaging.

Reuse of waste Myrica rubra for green synthesis of nitrogen-doped carbon dots as an "on-off-on" fluorescent probe for Fe3+ and ascorbic acid detection

As one kind of high nutrition fruits, abandoned Myrica rubra causes great waste due to short storage period. For resource utilization, we herein fabricated the Myrica rubra-based N-doped carbon dots (MN-CDs) by a facile/green hydrothermal method. MN-CDs, fabricated from four regions of China, displayed significant differences in their corresponding fluorescence intensities (FIs). Interestingly, different batches of waxberry samples from the same region (Wenzhou, China) exhibited slight differences in their FIs, and also an excellent anti-photobleaching and anti-salt capacity. Based on Fe³⁺-triggered quenching effect and fluorescent recovery by redox reaction of AA and Fe³⁺, MN-CDs were employed to construct an "on-off-on" switch probe for sequential detection of Fe³⁺ and ascorbic acid (AA). Through Zeta potential, UV spectrum, Stern-Volmer equation, and valence-conduction band theory, the Fe³⁺-triggered quenching belonged to a static quenching process, which resulted from the synergistic contribution of inner filtering effect and photo-induced electron transfer mechanisms. The linear ranges for Fe³⁺ and AA detections were 1-1000 and 0.1-1000 mM. The limits of detection were 0.3 μM for Fe³⁺ in environmental waters, and 0.03 μM for AA in pharmaceutical tablets and fruit juice samples. Under 365-nm UV lamp, the color changes of test papers were easily observed from dark blue and bright blue in the presence of Fe³⁺ and AA, and thus the MN-CDs-based switch probe could be satisfactorily used for visually qualitative detection of Fe³⁺ and AA outdoor with our naked eyes. To sum up, MN-CDs not only realize resource reutilization of abandoned Myrica rubra, but also offer an convenient outdoor approach for qualitative detection of Fe³⁺ and AA in complex matrices.

Fruit peel bioactives, valorisation into nanoparticles and potential applications: A review

Nanotechnology is a rapidly growing field with profound applications in different domains, particularly in food science and technology. Nanoparticles (NPs) synthesis, an integral part of nanotechnology-based applications, is broadly classified into chemical, physical and biosynthesis methods. Chemically sensitive and energy-intensive procedures employed for NPs synthesis are some of the limits of traditional chemical approaches. Recent research has focused on developing easy, nontoxic, cost-effective, and environment-friendly NPs synthesis during the last decade. Biosynthesis approaches have been developed to achieve this goal as it is a viable alternative to existing chemical techniques for the synthesis of metallic nanomaterials. Fruit peels contain abundant bioactive compounds including phenols, flavonoids, tannins, triterpenoids, steroids, glycosides, carotenoids, anthocyanins, ellagitannins, vitamin C, and essential oils with substantial health benefits, anti-bacterial and antioxidant properties, generally discarded as byproduct or waste by the fruit processing industry. NPs synthesized using bioactive compounds from fruit peel has futuristic applications for an unrealized market potential for nutraceutical and pharmaceutical delivery. Numerous studies have been conducted for the biosynthesis of metallic NPs such as silver (AgNPs), gold (AuNPs), zinc oxide, iron, copper, palladium and titanium using fruit peel extract, and their synthesis mechanism have been reported in the present review. Additionally, NPs synthesis methods and applications of fruit peel NPs have been discussed.

Synthesis of silver nanoparticles using Ziziphus nummularia leaf extract and evaluation of their antimicrobial, antioxidant, cytotoxic and genotoxic potential (4-in-1 system)

This study reports the synthesis of silver nanoparticles (AgNPs) from silver nitrate by leaf extract of a medicinal plant Ziziphus nummularia. The leaf extract acts as a reducing and stabilizing agent for the formation of nanoparticles. The green synthesized AgNPs were characterized by ultraviolet-visible (UV-vis) spectroscopy, Fourier transform infrared (FITR) spectroscopy, Thermogravimetric analysis (TGA), X-ray diffraction (XRD), transmission electron microscopy (TEM) analysis and evaluated their antimicrobial, antioxidant, cytotoxic and genotoxic potential. The UV-Vis spectroscopy showed a characteristic absorption peak at 430 nm due to surface plasma resonance. TEM analysis showed that synthesized AgNPs were spherical and oval with an average size of 25.96 nm. AgNPs showed effective antimicrobial activity (lowest MIC-0.625 µg/mL against Escherichia coli), synergistic antimicrobial activity (lowest ΣFIC 0.09 with chlormaphenicol against Corynebacterium rubrum) and antibiofilm activity. AgNPs showed strong DPPH activity with IC50 - 520 µg/mL and ABTS activity IC50 - 55 µg/mL and reducing capacity assessment. In vitro cytotoxic effect was evaluated by MTT assay against HeLa cells, breast cells and fibroblast cells. Genotoxic effect was evaluated by comet assay. AgNPs displayed dose-dependent cytotoxic and genotoxic effect. Our findings indicated that synthesized AgNPs could be considered as multifunctional and have great potential for use in biomedical applications.HighlightsSilver nanoparticles were synthesized using leaf extract of Ziziphus nummulariaCharacterization was done by various spectral techniquesAntimicrobial efficacy was demonstrated against an array of bacteriaAgNPs exhibited significant cytotoxic effect against HeLa cell lineAgNPs showed cytotoxicity and genotoxicity in a dose-dependent manner.

Nanocarriers-based immobilization of enzymes for industrial application

Nanocarriers-based immobilization strategies are a novel concept in the enhancement of enzyme stability, shelf life and efficiency. A wide range of natural and artificial supports have been assessed for their efficacy in enzyme immobilization. Nanomaterials epitomize unique and fascinating matrices for enzyme immobilization. These structures include carbon nanotubes, superparamagnetic nanoparticles and nanofibers. These nano-based supports offer stable attachment of enzymes, thus ensuring their reusability in diverse industrial applications. This review attempts to encompass recent developments in the critical role played by nanotechnology towards the improvement of the practical applicability of microbial enzymes. Nanoparticles are increasingly being used in combination with various polymers to facilitate enzyme immobilization. These endeavors are proving to be conducive for enzyme-catalyzed industrial operations. In recent years the diversity of nanomaterials has grown tremendously, thus offering endless opportunities in the form of novel combinations for various biotransformation experimentations. These nanocarriers are advantageous for both free enzymes and whole-cell immobilization, thus demonstrating to be relatively effective in several fermentation procedures.

Evaluation of Phytotoxicity of Bimetallic Ag/Au Nanoparticles Synthesized Using Geum urbanum L

The growing production and wider application of metal nanoparticles gives rise to many concerns about their release to natural ecosystems. It is very important to be aware of the harmful impact of nanoparticles on living organisms, including plants. Therefore, it is of vital significance to explore the impact of metal nanoparticles on plants. This work assessed the phytotoxicity of bimetallic Ag/Au nanoparticles and Geum urbanum L. extract. The obtained bimetallic Ag/Au nanoparticles were characterized by UV–vis spectrophotometry (UV–vis), Transmission electron microscopy (TEM), Scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). The microscopic studies enabled the determination of the size of the obtained nanoparticles, which was 50 nm. The wide range of concentrations evaluated in the course of the study made it possible to observe changes in selected plants (seeds of Lepidium sativum, Linum flavum, Zea mays, Solanum lycopersicum var. Cerasiforme and Salvia hispanica-Chia) caused by a stress factor. The studies showed that the solution of Ag/Au nanoparticles was most toxic to flax (IC50 = 9.83 × 10–6/9.25 × 10–6 mg/ml), and least toxic to lupine (IC50 = 1.23 × 10–3/1.16 × 10–3 mg/ml). Moreover, we studied the toxicity of Geum urbanum extract. The extracts diluted to 0.00875 mg/ml stimulated the growth of lupine, flax and garden cress; extracts diluted to 0.175 mg/ml stimulated the growth of Chia and tomatoes; and extracts diluted to 0.00875 mg/ml stimulated the growth of corn. G. urbanum extract was most toxic to lupine (IC50 = 0.374 mg/ml), and least toxic to corn (IC50 = 4.635 mg/ml).

Polyphenol Enriched Extract of Pomegranate Peel; A Novel Precursor for the Biosynthesis of Zinc Oxide Nanoparticles and Application in Sunscreens

Background: Green synthesized nanoparticles (NPs) from agricultural wastes is an area of great interest due to it is eco-friendly and profitable. Zinc oxide is an inorganic UV-filter commonly used as UV-blocker in a different industry. Methods: Zinc oxide nanoparticles (ZnO NPs) were successfully biosynthesized using Zn(NO3)2 as a substrate by polyphenol enriched fraction (PEF) of pomegranate peel. The biological activity of ZnO NPs was evaluated using MBC and MIC tests for antibacterial and DPPH assay for antioxidant potential. Sunscreen potential of NPs was determined after applying them in water-in-oil emulsions. Results: UV-Vis and FT-IR spectroscopy techniques confirmed the formation of ZnO NPs. FE-SEM characterized the morphology and purity of the biosynthesized NPs with EDAX and XRD data. The average crystalline size of ZnO NPs was found to be 22 nm. FT-IR spectroscopy revealed the role of phenolic compounds in the formation and stability of ZnO NPs. The antibacterial activity of PEF and its biosynthesized ZnO was evaluated against Staphylococcus aureus and Escherichia coli. The prepared NPs showed a higher antibacterial effect than the commercial ZnO NPs. Interestingly, the antioxidant activity was also detected for obtained NPs. The PEF powder also exhibited higher antibacterial and antioxidant activity than the standards. Furthermore, the in vitro sun protection factors were estimated after applying NPs in water-in-oil emulsions. Conclusion: This study highlighted the possibility of using PEF of pomegranate peel for the biosynthesis of ZnO NPs as well as applying its NPs in sunscreens to achieve a safe alternative to harmful chemical UV-filters commonly used in cosmetics.

Synthesis of arylidene hydrazinylpyrido[2,3-d]pyrimidin-4-ones as potent anti-microbial agents

Combination of arylidene hydrazinyl moiety with pyrido[2,3-d]pyrimidin-4-one skeleton in compounds 7‒26 results in the output of unprecedented anti-microbial agents. Arylidene hydrazinyl based on Pyrido[2,3-d]pyrimidin-4-one analoges 7‒26 prepared by the treatment of [2,3-d]pyrimidin-4-ones 6a,b with various aromatic aldehydes. The antimicrobial action for recently synthesized compounds was considered towards gram positive bacterial species (Staphylococcus aurous ATCC- 47077; Bacillus cereus ATCC-12228), gram negative bacterial species (Escherichia coli ATCC-25922; Salmonella typhi ATCC-15566) and Candida albicans ATCC-10231 as fungal strains. The antimicrobial action expanded by expanding the electron donating group in position 2 and 5 for Pyrido[2,3-d]pyrimidin-4-one core. Derivatives 13, 14, 15, 16 and 12; individually appeared hopeful anti-microbial action towards all strains utilized with inhibition zone higher than that of standard reference drug with lowest MIC.

Metal-Based Nanoparticles as Antimicrobial Agents: An Overview

Metal-based nanoparticles have been extensively investigated for a set of biomedical applications. According to the World Health Organization, in addition to their reduced size and selectivity for bacteria, metal-based nanoparticles have also proved to be effective against pathogens listed as a priority. Metal-based nanoparticles are known to have non-specific bacterial toxicity mechanisms (they do not bind to a specific receptor in the bacterial cell) which not only makes the development of resistance by bacteria difficult, but also broadens the spectrum of antibacterial activity. As a result, a large majority of metal-based nanoparticles efficacy studies performed so far have shown promising results in both Gram-positive and Gram-negative bacteria. The aim of this review has been a comprehensive discussion of the state of the art on the use of the most relevant types of metal nanoparticles employed as antimicrobial agents. A special emphasis to silver nanoparticles is given, while others (e.g., gold, zinc oxide, copper, and copper oxide nanoparticles) commonly used in antibiotherapy are also reviewed. The novelty of this review relies on the comparative discussion of the different types of metal nanoparticles, their production methods, physicochemical characterization, and pharmacokinetics together with the toxicological risk encountered with the use of different types of nanoparticles as antimicrobial agents. Their added-value in the development of alternative, more effective antibiotics against multi-resistant Gram-negative bacteria has been highlighted.

Zinc oxide from aloe vera extract: two-level factorial screening of biosynthesis parameters

Zinc oxide (ZnO) was biosynthesised from aloe vera plant extract. The aloe vera plant extract was used as a reducing agent in biosynthesis process. Green synthesis method was proposed because it is cost effective and environmentally friendly. ZnO was characterised using SEM, EDX, FTIR, and XRD analyses. The antibacterial property was tested against Escherichia coli. The effects of aloe vera volume (2–50) mL, precursor concentration (0.001–0.300) M, reaction time (20 min–48 h), and temperature of the reaction (26–200) °C on ZnO characteristics were investigated and screened using a two-level factorial method. Based on the observation and ANOVA analysis result, precursor concentration was the only significant parameter that affected the production of the ZnO nanoparticles (NPs). The EDX analysis proved the presence of ZnO while the SEM analysis confirmed the average size of ZnO particle size was in the range of (18–618) μm with a rod-shape appearance. The XRD analysis showed that the average crystallite size was 0.452 μm and it was in the hexagonal phase. It was also proven to have antibacterial property against E. coli.

Hydrothermal Fabrication of Spindle-Shaped ZnO/Palygorskite Nanocomposites Using Nonionic Surfactant for Enhancement of Antibacterial Activity

In order to improve the antibacterial performance of natural palygorskite, spindle-like ZnO/palygorskite (ZnO/PAL) nanocomposites with controllable growth of ZnO on the surface of PAL were prepared in the presence of non-ionic surfactants using an easy-to-operate hydrothermal method. The obtained ZnO/PAL nanocomposites have a novel and special spindle-shaped structure and good antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and are also low cost. The minimum inhibitory concentrations of ZnO/PAL nanocomposites toward E. coli and S. aureus reached 1.5 and 5 mg/mL, respectively.

Green and Simple Synthesis of Silver Nanoparticles by Aqueous Extract of Perovskia abrotanoides: Characterization, Optimization and Antimicrobial Activity

BACKGROUND

Herein, we report the biosynthesis procedure to prepare silver nanoparticles as reduction and capping agents with the aqueous plant extract of Perovskia abrotanoides.

METHODS

The therapeutic application of silver nanoparticles entirely depends on the size and shape of the nanoparticles therefore, their control during the synthesis procedure is so important. The effects of synthesis factors, for example, silver ion concentration, the mass of plant extract, reaction time and extraction temperature, on the size of silver particles were considered and optimized. Several analytical methods were used for the characterization of silver NPs including FT-IR and UV-Vis spectrophotometer, XRD and SEM.

RESULTS

The results showed that the mean size of the silver particles was about 51 nm. Moreover, the antibacterial properties of biosynthesized silver NPs were investigated by the minimum inhibitory concentration, minimum bactericidal concentration, and Well-diffusion tests. The minimum inhibitory concentration/ minimum bactericidal concentration values of silver NPs and aqueous plant extract versus Gram-positive bacteria (Staphylococcus aureus and Bacillus cereus) and Gram-negative bacteria (E. coli) were 3.03/0.00, 1.20/0.01, 3.06/0.00, 0.98/1.04, 1.00/0.05 and 1.30/0.03 (mg/mL), respectively.

CONCLUSION

The antimicrobial activity study displayed that the synthesized silver nanoparticles by plant extract have better antimicrobial properties compared to aqueous plant extract of Perovskia abrotanoides.

Nanoparticles: biosynthesis, translocation and role in plant metabolism

Nanotechnology is an emerging field of science that applies particles between 1 and 100 nm in size for a range of practical uses. Nano-technological discoveries have opened novel applications in biotechnology and agriculture. Many reactions involving nanoparticles (NPs) are more efficient compared to those of their respective bulk materials. NPs obtained from plant material, denoted as biogenic or phytosynthesised NPs, are preferred over chemically synthesised NPs due to their low toxicity, rapid reactions and cost-effective production. NPs impart both positive and negative impacts on plant growth and development. NPs exhibit their unique actions as a function of their size, reactivity, surface area and concentration. An insight into NP biosynthesis and translocation within the plant system will shed some light on the roles and mechanisms of NP-mediated regulation of plant metabolism. This review is a step towards that goal.