Oxygen releasing materials: Towards addressing the hypoxia-related issues in tissue engineering

Oxygen-generating and antibacterial xanthan gum/PLA aerogels loaded with dexamethasone for potential wound healing

Chronic wounds do not heal within a reasonable time frame due to hypoxia and bacterial inflammation, creating an urgent need for advanced biomaterials to address these challenges. In this study, oxygen-generating, antibacterial xanthan gum-polylactic acid (XA/PLA) aerogels loaded with dexamethasone were developed for the first time for potential wound healing applications. The aerogels contained sodium percarbonate and calcium peroxide as oxygen-releasing agents, providing sustained oxygen release for up to 48 h. The aerogels had a highly porous structure with a high specific surface area (up to 396 ± 8 m2/g) and revealed high liquid absorption capacity in simulated body fluid, absorbing up to 67 times their original weight and remaining stable for 72 h. The in vitro release tests showed controlled profiles of dexamethasone over 24 h. The antibacterial tests demonstrated strong antibacterial activity against Escherichia coli (an up to 15.92 mm inhibition zone diameter) and Staphylococcus aureus (up to a 31.07 mm inhibition zone diameter). The in vitro biocompatibility assays revealed good cytocompatibility with mouse fibroblast cells (NIH/3T3), with a cell viability of >90%. Hemocompatibility tests showed no hemolytic activity with human blood (lysis rate <2%). Overall, these results emphasise the versatility of the XA/PLA aerogels and their potential for the treatment of chronic wounds.

Advances in oxygen-releasing matrices for regenerative engineering applications

In recent years, the effects of hypoxia on tissue repair have received wider attention with the deepening of tissue engineering research. Various oxygen supply strategies have wider applications in the field of tissue repair. Currently, commonly used methods of oxygen supply for defective tissues include hyperbaric oxygen (HBO) and oxygen-releasing materials. Between them, oxygen-releasing materials continuously and efficiently release oxygen from within the defective tissue. Compared with HBO, which may cause oxidative stress in healthy tissues, supplying oxygen via oxygen-releasing materials is safer because of their oxygen-releasing in situ and specific oxygen supply characteristics. However, there still exist some problems in the study of oxygen-releasing materials, such as cytotoxicity and the shortage of oxygen-releasing time. The current reviews on oxygen-releasing materials mostly elaborate on the principles of oxygen-releasing materials and lack a review of their preparation methods and applications. In this paper, different types of oxygen-releasing materials, such as hydrogels, microspheres, and layers, are reviewed concerning their applications, structures, current development status, and challenges.

The potential of carbohydrate supramolecular hydrogels for long-term 3D culture of primary fibroblasts

N-Alkyl-galactonamides, which are small synthetic molecules derived from galactose, self-assemble to give fibrous hydrogels. These molecules are biocompatible and, in a previous study, the cell culture of human neural stem cells was performed for 7 days on a gel of N-heptyl-D-galactonamide. With the objective of broadening the scope of these molecules as scaffolds for cell culture, in the present study, the culture of primary human dermal fibroblasts has been carried out on N-nonyl-D-galactonamide hydrogels. These supramolecular fibrillar hydrogels have a sufficient mechanical strength to withstand cell culture (≈50 kPa) and they are resistant enough on the long term to carry out the cell culture over at least 3 weeks. In contrast to N-heptyl-D-galactonamide, N-nonyl-D-galactonamide is insoluble in the culture medium. It avoids its dissolution at each renewal of the culture medium. The molecule is only slowly eliminated by other mechanisms (1/3rd in 3 weeks), which did not impair the cell culture on a monthly scale. The hydrogel's microstructure and how the cells organize on this scaffold have been studied using electron and two-photon microscopies. The gel is made of a quite homogeneous network with a width of ≈180 nm and hundreds of micrometer long fibers, except at the surface where a dense mat of heterogeneous fibers is formed. We focused on methods able to colocalize the cells and the gel fibers. Many cell clusters have elongated and multidirectionnal shapes, guided by the fibers. Chains of single cells are also found following the fibers from one cluster to another. N-Nonyl-D-galactonamide fibers, which have the advantage of not being autofluorescent, do not mask the fluorescence of cells. But interestingly, they give a strong second harmonic generation (SHG) signal, due to their well-organized lamellar structure. We also made a special effort to visualize the penetration of cells within the depth of the hydrogels, in 3D, notably by sectioning the hydrogels, despite their softness. It was found that most of the cells stayed at the surface, but several cells grew within the supramolecular fiber network between 50 and 100 μm depth.

Copper-Based Metal-Organic Framework as a Potential Therapeutic Gas Carrier: Optimization, Synthesis, Characterization, and Computational Studies

The broad spectrum of health conditions and the global pandemic, leading to inadequate medical oxygen supply and management, has driven interest in developing porous nanocarriers for effective oxygenation strategies. We aim to develop an injectable oxygen carrier with regard to biocompatibility, safety, prehospital availability, and universal applicability. In this study, we have tried to identify important functional sites on metal-organic frameworks (MOFs) for gas binding with the help of Grand canonical Monte Carlo simulation. We have synthesized a copper-based MOF (Cu-BTC) with a 1,3,5-benzenetricarboxylic acid linker through a solvothermal approach as a competent porous adsorbent for oxygen storage and delivery. To optimize process variables, we performed statistical analysis using response surface methodology. A quadratic model was developed to study the interaction between independent variables and the response (i.e., maximizing surface area), whose adequacy is validated by the correlation between experimental and predicted values using the ANOVA method. The synthesized Cu-BTC, before and after oxygen loading, was characterized using X-ray diffraction, surface area, along with pore distribution measurement, particle size analysis, scanning electron microscopy, transmission electron microscopy, and gas adsorption studies. The Cu-BTC MOF exhibited an oxygen uptake of 4.6 mmol g-1, the highest among all the oxygen carriers reported in the literature under the same operating conditions. Overall, our findings suggest that this synthesized Cu-BTC with high surface area (1389 m2 g-1), high porosity, optimum oxygen uptake, and good biocompatibility would show potential toward efficient storage and delivery (direct to the targeted site) of medical oxygen to raise the blood oxygen saturation level.

Bioprinting functional hepatocyte organoids derived from human chemically induced pluripotent stem cells to treat liver failure

BACKGROUND

To treat liver failure, three-dimensional (3D) bioprinting is a promising technology used to construct hepatic tissue models. However, current research on bioprinting of hepatic tissue models primarily relies on conventional single-cell-based bioprinting, where individual functional hepatocytes are dispersed and isolated within hydrogels, leading to insufficient treatment outcomes due to inadequate cell functionality.

OBJECTIVE

Here, we aim to bioprint a hepatic tissue model using functional hepatocyte organoids (HOs) and evaluate its liver-specific functions in vitro and in vivo.

DESIGN

Human chemically induced pluripotent stem cells (hCiPSCs) were used as a robust and non-genome-integrative cell source to produce highly viable and functional HOs (hCiPSC-HOs). An oxygen-permeable microwell device was used to enhance oxygen supply, ensuring high cell viability and promoting hCiPSC-HOs maturation. To maintain the long-term biofunction of hCiPSC-HOs, spheroid-based bioprinting was employed to construct hepatic tissue models (3DP-HOs). 3DP-HOs were intraperitoneally implanted in mice with liver failure.

RESULTS

3DP-HOs demonstrated enhanced cell viability when compared with a model fabricated using single-cell-based bioprinting and exhibited gene profiles closely resembling hCiPSC-HOs while maintaining liver-specific functionality. Moreover, 3DP-HOs implantation significantly improved survival in mice with CCl4-induced acute-on-chronic liver failure and also Fah-/- mice with liver failure. 3DP-HOs significantly reduced liver injury, inflammation and fibrosis indices while promoting liver regeneration and biofunction expression.

CONCLUSION

Our bioprinted hepatic tissue model exhibits remarkable therapeutic efficacy for liver failure and holds great potential for clinical research in the field of liver regenerative medicine.

Therapeutic delivery of oxygen using artificial oxygen carriers demonstrates the possibility of treating a wide range of diseases

Artificial oxygen carriers have emerged as potential substitutes for red blood cells in situations of major blood loss, including accidents, surgical procedures, trauma, childbirth, stomach ulcers, hemorrhagic shock, and blood vessel ruptures which can lead to sudden reduction in blood volume. The therapeutic delivery of oxygen utilizing artificial oxygen carriers as red blood cell substitutes presents a promising avenue for treating a spectrum of disease models. Apart from that, the recent advancement of artificial oxygen carriers intended to supplant conventional blood transfusions draws significant attention due to the exigencies of warfare and the ongoing challenges posed by the COVID-19 pandemic. However, there is a pressing need to formulate stable, non-toxic, and immunologically inert oxygen carriers. Even though numerous challenges are encountered in the development of artificial oxygen carriers, their applicability extends to various medical treatments, encompassing elective and cardiovascular surgeries, hemorrhagic shock, decompression illness, acute stroke, myocardial infarction, sickle cell crisis, and proficient addressing conditions such as cerebral hypoxia. Therefore, this paper provides an overview of therapeutic oxygen delivery using assorted types of artificial oxygen carriers, including hemoglobin-based, perfluorocarbon-based, stem cell-derived, and oxygen micro/nanobubbles, in the treatment of diverse disease models. Additionally, it discusses the potential side effects and limitations associated with these interventions, while incorporating completed and ongoing research and recent clinical developments. Finally, the prospective solutions and general demands of the perfect artificial oxygen carriers were anticipated to be a reference for subsequent research endeavors.

Modulating Microbial Materials - Engineering Bacterial Cellulose with Synthetic Biology

The fusion of synthetic biology and materials science offers exciting opportunities to produce sustainable materials that can perform programmed biological functions such as sensing and responding or enhance material properties through biological means. Bacterial cellulose (BC) is a unique material for this challenge due to its high-performance material properties and ease of production from culturable microbes. Research in the past decade has focused on expanding the benefits and applications of BC through many approaches. Here, we explore how the current landscape of BC-based biomaterials is being shaped by progress in synthetic biology. As well as discussing how it can aid production of more BC and BC with tailored material properties, we place special emphasis on the potential of using BC for engineered living materials (ELMs); materials of a biological nature designed to carry out specific tasks. We also explore the role of 3D bioprinting being used for BC-based ELMs and highlight specific opportunities that this can bring. As synthetic biology continues to advance, it will drive further innovation in BC-based materials and ELMs, enabling many new applications that can help address problems in the modern world, in both biomedicine and many other application fields.

Oxygenation by Intravascular Photosynthesis Reduces Kidney Damage During ex Vivo Preservation

Several clinical issues are associated with reduced oxygen delivery to tissues due to impaired vascular perfusion; moreover, organs procured for transplantation are subjected to severe hypoxia during preservation. Consequently, alternative tissue oxygenation is an active field in biomedical research where several innovative approaches have been recently proposed. Among these, intravascular photosynthesis represents a promising approach as it relies on the intrinsic capacity of certain microorganisms to produce oxygen upon illumination. In this context, this work aims at the development of photosynthetic perfusable solutions that could be applied to preserve organs for transplantation purposes. Our findings demonstrate that a biocompatible physiological solution containing the photosynthetic microalgae Chlamydomonas reinhardtii can fulfill the metabolic oxygen demand of rat kidney slices in vitro. Furthermore, intravascular administration of this solution does not induce tissue damage in the rat kidneys. Moreover, kidney slices obtained from these algae-perfused organs exhibited significantly improved preservation after 24 h of incubation in hypoxia while exposed to light, resulting in reduced tissue damage and enhanced metabolic status. Overall, the results presented here contribute to the development of alternative strategies for tissue oxygenation, supporting the use of perfusable photosynthetic solutions for organ preservation in transplantation.

Flowable Oxygen-Release Hydrogel Inhibits Bacteria and Treats Periodontitis

Periodontitis, the chronic inflammation of the periodontal tissues caused by bacteria in plaque, is the leading cause of tooth loss in adults in the world. Currently, periodontitis is effectively treated with mechanical cleaning and the use of antibiotics. However, these treatments only temporarily remove plaque, which can rapidly proliferate and multiply in periodontal pockets over time. Although antibiotics have positive antimicrobial effects, their long-term use increases the risk of the emergence of drug-resistant strains. The emergence of resistant strains reduces the effectiveness of periodontitis treatment and makes the disease more difficult to control. Herein, this paper reports the development of an injectable self-oxygenating composite hydrogel for periodontal therapy, which was produced by loading CaO2 nanoparticles and ascorbic acid into an injectable alginate hydrogel. CaO2 can improve the periodontal pocket microenvironment by reacting with water to generate oxygen, calcium ions can be used as a bone regeneration material, and ascorbic acid protects cells. The authors further showed that the composite hydrogel inhibited growth and colonization of anaerobic bacteria, reduced the degree of inflammation, and promoted alveolar bone regeneration. In conclusion, these findings suggest that the composite hydrogel can be used as a biocompatible, convenient, and effective method for periodontitis treatment.

Innovations in 3D ovarian and follicle engineering for fertility preservation and restoration

In-vitro maturation (IVM) is the process of cultivating early-stage follicles from the primordial to the antral stage and facilitating the maturation of oocytes outside the body within a supportive environment. This intricate procedure requires the careful coordination of various factors to replicate the natural ovarian conditions. Advanced techniques for IVM are designed to mimic the natural ovarian environment and enhance the development of follicles. Three-dimensional (3D) culture systems provide a more biologically relevant setting for follicle growth compared to traditional two-dimensional (2D) cultures. Traditional culture systems, often fail to support the complex process of follicle development effectively. However, modern engineered reproductive tissues and culture systems are making it possible to create increasingly physiological in-vitro models of folliculogenesis. These innovative methods are enabling researchers and clinicians to better replicate the dynamic and supportive environment of the ovary, thereby improving the outcomes of IVM offering new hope for fertility preservation and treatment. This paper focuses on the routine 3D culture, and innovative 3D culture of ovary and follicles, including a tissue engineering scaffolds, microfluidic (dynamic) culture system, organ-on-chip models, EVATAR system, from a clinical perspective to determine the most effective approach for achieving in-vitro maturation of follicles. These techniques provide critical support for ovarian function in various ovarian-associated disorders, including primary ovarian insufficiency (POI), premature ovarian failure (POF), ovarian cancer, and age-related infertility.

Fabrication of fiber-particle structures by electrospinning/electrospray combination as an intrinsic antioxidant and oxygen-releasing wound dressing

In this study, we employed a combination of electrospinning and electrospray techniques to fabricate wound dressings with a particle-fiber structure, providing dual characteristics of oxygen-releasing and intrinsic antioxidant properties, simultaneously. The electrospun part of the dressing was prepared from a blend of polycaprolactone/gallic acid-grafted-gelatin (GA-g-GE), enabling intrinsic ROS scavenging. To the best of our knowledge, this is the first time that PCL/GA-g-GE was fabricated by electrospinning. Furthermore, polyvinyl pyrrolidone (PVP) microparticles, containing calcium peroxide nanoparticles (CNPs), were considered as the oxygen production agent through the electrospray part. The CNP content was 1% and 3% w/w of PVP while biopolymer:PCL was 10% w/w. The fabricated structures were characterized in terms of fiber/particle morphology, elemental analysis, oxygen release behavior, ROS inhibition capacity, and water contact angle assessments. The covalent bonding of gallic acid to gelatin was confirmed by 1H-NMR, UV spectroscopy, and FTIR. According to the SEM results, the morphology of the prepared PCL/biopolymer fibers was bead-free and with a uniform average diameter. The analysis of released oxygen showed that by increasing the weight percentage of CNPs from 1 to 3 wt%, the amount of released oxygen increased from 120 mmHg to 195 mmHg in 24 h, which remained almost constant until 72 h. The obtained DPPH assay results revealed that the introduction of GA-g-GE into the fibrous structure could significantly improve the antioxidant properties of wound dressing compared to the control group without CNPs and modified gelatine. In vitro, the fabricated wound dressings were evaluated in terms of biocompatibility and the potential of the dressing to protect human dermal fibroblasts under oxidative stress and hypoxia conditions by an MTT assay. The presence of GA-g-GE led to remarkable protection of the cells against oxidative stress and hypoxia conditions. In vivo studies revealed that the incorporation of intrinsic ROS inhibition and oxygen-releasing properties could significantly accelerate the wound closure rate during the experimental period (7, 14, and 21 days). Additionally, histopathological investigations in terms of H&E and Masson's trichrome staining showed that the incorporation of the two mentioned capabilities remarkably facilitated the wound-healing process.

3D printed O2-generating scaffolds enhance osteoprogenitor- and type H vessel recruitment during bone healing

Oxygen (O2)-delivering tissue substitutes have shown tremendous potential for enhancing tissue regeneration, maturation, and healing. As O2 is both a metabolite and powerful signaling molecule, providing controlled delivery is crucial for optimizing its beneficial effects in the treatment of critical-sized injuries. Here, we report the design and fabrication of 3D-printed, biodegradable, O2-generating bone scaffold comprising calcium peroxide (CPO) that once hydrolytically activated, provides long-term generation of oxygen at a controlled, concentration-dependent manner, and polycaprolactone (PCL), a hydrophobic polymer that regulate the interaction of CPO with water, preventing burst release of O2 at early time points. When anoxic conditions were simulated in vitro, CPO-PCL scaffolds maintained the survival and proliferation of human adipose-derived stem/stromal cells (hASCs) relative to PCL-only controls. We assessed the in vivo osteogenic efficacy of hASC-seeded CPO-PCL scaffolds implanted in a non-healing critical-sized 4-mm calvarial defects in nude mice for 8 weeks. Even without exogenous osteoinductive factors, CPO-PCL scaffolds demonstrated increased new bone volume compared to PCL-only scaffolds as verified by both microcomputed tomography analysis and histological assessments. Lastly, we employed a quantitative 3D lightsheet microscopy platform to determine that O2-generating scaffolds had similar vascular volumes with slightly higher presence of CD31hiEmcnhi pro-osteogenic, type H vessels and increased number of Osterix+ skeletal progenitor cells relative to PCL-only scaffolds. In summary, 3D-printed O2 generating CPO-PCL scaffolds with tunable O2 release rates provide a facile, customizable strategy for effectively treating, craniofacial bone defects. STATEMENT OF SIGNIFICANCE: Oxygen(O2)-delivering bone substitutes show promise in defect repair applications by supplying O2 to the cells within or around the graft, improving cell survivability and enhancing bone matrix mineralization. A novel O2-generating bone scaffold has been 3D printed for the first-time which ensures patient and defect specificity. 3D printed calcium peroxide-polycaprolactone (CPO-PCL) bone scaffold provides uninterrupted O2 supply for 22 days allowing cell survival in deprived O2 and nutrient conditions. For the first time, O2-driven bone regenerative environment in mice calvaria has been captured by light-sheet imaging which illuminates abundance of Osterix+ cells, angiogenesis at a single cell resolution indicating active site of bone remodeling and growth in the presence of O2.

Fabrication of oxygen-releasing dextran microgels by droplet-based microfluidic method

In the tissue engineering field, the supply of oxygen to three-dimensional (3D) tissues is an important aspect to avoid necrosis due to hypoxia. Although oxygen-releasing bulk materials containing calcium peroxide (CaO2, CP) have attracted much attention, micrometer-sized oxygen-releasing soft materials would be advantageous because of their highly controllable structures, which can be applied for cell scaffolds, injectable materials, and bioink components in 3D bioprinting. In this study, oxygen-releasing microgels were fabricated via a droplet-based microfluidic system. Homogeneous, monodisperse and stable oxygen-releasing microgels were obtained by photo-crosslinking of droplets composed of biocompatible dextran modified with methacrylate groups and CP nanoparticles as an oxygen source. We also used our microfluidic system for the in situ amorphous calcium carbonate (CaCO3, ACC) formation on the surface of CP nanoparticles to achieve the controlled release of oxygen from the microgel. Oxygen release from an ACC-CP microgel in a neutral cell culture medium was suppressed because incorporation of CP in the ACC suppressed the reaction with water. Strikingly, stimuli to dissolve ACC such as a weak acidic conditions triggered the oxygen release from microgels loaded with ACC-CP, as the dissolution of CaCO3 allows CP to react. Taken together, applications of this new class of biomaterials for tissue engineering are greatly anticipated. In addition, the developed microfluidic system can be used for a variety of oxygen-releasing microgels by changing the substrates of the hydrogel network.

Advances in Cell-Rich Inks for Biofabricating Living Architectures

Advancing biofabrication toward manufacturing living constructs with well-defined architectures and increasingly biologically relevant cell densities is highly desired to mimic the biofunctionality of native human tissues. The formulation of tissue-like, cell-dense inks for biofabrication remains, however, challenging at various levels of the bioprinting process. Promising advances have been made toward this goal, achieving relatively high cell densities that surpass those found in conventional platforms, pushing the current boundaries closer to achieving tissue-like cell densities. On this focus, herein the overarching challenges in the bioprocessing of cell-rich living inks into clinically grade engineered tissues are discussed, as well as the most recent advances in cell-rich living ink formulations and their processing technologies are highlighted. Additionally, an overview of the foreseen developments in the field is provided and critically discussed.

Electron Spin Resonance Probe Incorporation into Bioinks Permits Longitudinal Oxygen Imaging of Bioprinted Constructs

PURPOSE

Bioprinting is an additive manufacturing technology analogous to 3D printing. Instead of plastic or resin, cell-laden hydrogels are used to produce a construct of the intended biological structure. Over time, cells transform this construct into a functioning tissue or organ. The process of printing followed by tissue maturation is referred to as 4D bioprinting. The fourth dimension is temporal. Failure to provide living cells with sufficient amounts of oxygen at any point along the developmental timeline may jeopardize the bioprinting goals. Even transient hypoxia may alter cells' differentiation and proliferation or trigger apoptosis. Electron paramagnetic resonance (EPR) imaging modality is proposed to permit 4D monitoring of oxygen within bioprinted structures.

PROCEDURES

Lithium octa-n-butoxy-phthalocyanine (LiNc-BuO) probes have been introduced into gelatin methacrylate (GelMA) bioink. GelMA is a cross-linkable hydrogel, and LiNc-BuO is an oxygen-sensitive compound that permits longitudinal oximetric measurements. The effects of the oxygen probe on printability have been evaluated. A digital light processing (DLP) bioprinter was built in the laboratory. Bioprinting protocols have been developed that consider the optical properties of the GelMA/LiNc-BuO composites. Acellular and cell-laden constructs have been printed and imaged. The post-printing effect of residual photoinitiator on oxygen depletion has been investigated.

RESULTS

Models have been successfully printed using a lab-built bioprinter. Rapid scan EPR images reflective of the expected oxygen concentration levels have been acquired. An unreported problem of oxygen depletion in bioprinted constructs by the residual photoinitiator has been documented. EPR imaging is proposed as a control method for its removal. The oxygen consumption rates by HEK293T cells within a bioprinted cylinder have been imaged and quantified.

CONCLUSIONS

The feasibility of the cointegration of 4D EPR imaging and 4D bioprinting has been demonstrated. The proof-of-concept experiments, which were conducted using oxygen probes loaded into GelMA, lay the foundation for a broad range of applications, such as bioprinting with many types of bioinks loaded with diverse varieties of molecular spin probes.

Microfluidic strategies for engineering oxygen-releasing biomaterials

In the field of tissue engineering, local hypoxia in large-cell structures (larger than 1 mm3) poses a significant challenge. Oxygen-releasing biomaterials supply an innovative solution through oxygen ⁠ delivery in a sustained and controlled manner. Compared to traditional methods such as emulsion, sonication, and agitation, microfluidic technology offers distinct benefits for oxygen-releasing material production, including controllability, flexibility, and applicability. It holds enormous potential in the production of smart oxygen-releasing materials. This review comprehensively covers the fabrication and application of microfluidic-enabled oxygen-releasing biomaterials. To begin with, the physical mechanism of various microfluidic technologies and their differences in oxygen carrier preparation are explained. Then, the distinctions among diverse oxygen-releasing components in regards for oxygen-releasing mechanism, oxygen-carrying capacity, and duration of oxygen release are presented. Finally, the present obstacles and anticipated development trends are examined together with the application outcomes of oxygen-releasing biomaterials based on microfluidic technology in the biomedical area. STATEMENT OF SIGNIFICANCE: Oxygen is essential for sustaining life, and hypoxia (a condition of low oxygen) is a significant challenge in various diseases. Microfluidic-based oxygen-releasing biomaterials offer precise control and outstanding performance, providing unique advantages over traditional approaches for tissue engineering. However, comprehensive reviews on this topic are currently lacking. In this review, we provide a comprehensive analysis of various microfluidic technologies and their applications for developing oxygen-releasing biomaterials. We compare the characteristics of organic and inorganic oxygen-releasing biomaterials and highlight the latest advancements in microfluidic-enabled oxygen-releasing biomaterials for tissue engineering, wound healing, and drug delivery. This review may hold the potential to make a significant contribution to the field, with a profound impact on the scientific community.

Oxygen enrichment mediated by calcium peroxide loaded gelatin methacrylate hydrogel eradicates periodontal biofilms

The low oxygen environment of the periodontal pocket favors pathogenic anaerobes' growth, biofilm formation, and quick recurrence after periodontal treatment. In contrast, oxygen is detrimental to anaerobes, such as Porphyromonas gingivalis (P. gingivalis), since they lack a complete anti-oxidation mechanism to detoxify the oxygen challenge. Therefore, consistently feeding pathogenic anaerobes with abundant oxygen would be an effective strategy to combat them. Here, we reported injectable oxygen-generating hydrogels as oxygen mediators to alleviate the local anaerobic environment and eliminate periodontal pathogens. Gelatin methacrylate (GelMA) hydrogels loaded with calcium peroxide (CPO) possessed excellent injectability and exhibited burst releases of oxygen within 24 h with a 40 % oxygen tension peak. CPO-GelMA hydrogels with CPO concentrations of 5, 10, and 15 % reduced 60, 99, and 89.9 % viable P. gingivalis, respectively. Five percentage CPO-GelMA hydrogel downregulated gingipain and fimA gene expression in P. gingivalis without resistance development. Moreover, the CPO-GelMA hydrogels remarkably prevented biofilm formation and eradicated both monospecies and multispecies bacterial biofilms. In conclusion, CPO-GelMA hydrogels exert remarkable antimicrobial and antibiofilm effects on subgingival biofilms, providing a promising strategy for periodontal treatment.

Bioassembly of hemoglobin-loaded photopolymerizable spheroids alleviates hypoxia-induced cell death

The delivery of oxygen within tissue engineered constructs is essential for cell survivability; however, achieving this within larger biofabricated constructs poses a significant challenge. Efforts to overcome this limitation often involve the delivery of synthetic oxygen generating compounds. The application of some of these compounds is problematic for the biofabrication of living tissues due to inherent issues such as cytotoxicity, hyperoxia and limited structural stability due to oxygen inhibition of radical-based crosslinking processes. This study aims to develop an oxygen delivering system relying on natural-derived components which are cytocompatible, allow for photopolymerization and advanced biofabrication processes, and improve cell survivability under hypoxia (1% O2). We explore the binding of human hemoglobin (Hb) as a natural oxygen deposit within photopolymerizable allylated gelatin (GelAGE) hydrogels through the spontaneous complex formation of Hb with negatively charged biomolecules (heparin, hyaluronic acid, and bovine serum albumin). We systematically study the effect of biomolecule inclusion on cytotoxicity, hydrogel network properties, Hb incorporation efficiency, oxygen carrying capacity, cell viability, and compatibility with 3D-bioassembly processes within melt electrowritten (MEW) scaffolds. All biomolecules were successfully incorporated within GelAGE hydrogels, displaying controllable mechanical properties and cytocompatibility. Results demonstrated efficient and tailorable Hb incorporation within GelAGE-Heparin hydrogels. The developed system was compatible with microfluidics and photopolymerization processes, allowing for the production of GelAGE-Heparin-Hb spheres. Hb-loaded spheres were assembled into MEW polycaprolactone scaffolds, significantly increasing the local oxygen levels. Ultimately, cells within Hb-loaded constructs demonstrated good cell survivability under hypoxia. Taken together, we successfully developed a hydrogel system that retains Hb as a natural oxygen deposit post-photopolymerization, protecting Hb from free-radical oxidation while remaining compatible with biofabrication of large constructs. The developed GelAGE-Heparin-Hb system allows for physoxic oxygen delivery and thus possesses a vast potential for use across broad tissue engineering and biofabrication strategies to help eliminate cell death due to hypoxia.

Raspberry-like PLA/PGS biodegradable microparticles with urethane linkages: Unlocking tailored release of magnesium ions and oxygen for bone tissue engineering

Designing biodegradable microparticles with finely controlled release properties for tissue engineering systems remains a significant scientific challenge. This study introduces a novel approach by fabricating urethane-linked PLA/PGS microparticles loaded with magnesium peroxide. The microparticles offer potential applications in bone tissue engineering due to their ability to provide a controlled release of oxygen and magnesium ions while maintaining physiological pH. The PGS pre-polymer was synthesized via polycondensation and characterized using FTIR, 1H NMR, and GPC. Microparticle morphology transformed from smooth to raspberry-like upon incorporation of PGS, as observed by SEM. Microparticle size was tuned by varying PGS and PLA concentrations. FTIR analysis confirmed the successful formation of urethane links within the microparticles. MgO2-loaded PLA/PGS microparticles exhibited sustained release of dissolved oxygen and magnesium ions for 21 days while maintaining physiological pH better than PLA microparticles. Cell viability assays confirmed microparticle cytocompatibility, and ALP and Alizarin red assays demonstrated their ability to induce osteogenic differentiation. These findings highlight the potential of pH-controlled MgO2-loaded microparticles as an effective system for bone tissue engineering. In conclusion, this study presents a novel approach to designing biodegradable microparticles with adjustable release properties for bone tissue engineering. The urethane-based MgO2-loaded microparticles provide controlled release of oxygen and magnesium ions and regulate the environment's pH, making them a promising system for bone tissue engineering applications.

Oxygen generating biomaterials at the forefront of regenerative medicine: advances in bone regeneration

Globally, an annual count of more than two million bone transplants is conducted, with conventional treatments, including metallic implants and bone grafts, exhibiting certain limitations. In recent years, there have been significant advancements in the field of bone regeneration. Oxygen tension regulates cellular behavior, which in turn affects tissue regeneration through metabolic programming. Biomaterials with oxygen release capabilities enhance therapeutic effectiveness and reduce tissue damage from hypoxia. However, precise control over oxygen release is a significant technical challenge, despite its potential to support cellular viability and differentiation. The matrices often used to repair large-size bone defects do not supply enough oxygen to the stem cells being used in the regeneration process. Hypoxia-induced necrosis primarily occurs in the central regions of large matrices due to inadequate provision of oxygen and nutrients by the surrounding vasculature of the host tissues. Oxygen generating biomaterials (OGBs) are becoming increasingly significant in enhancing our capacity to facilitate the bone regeneration, thereby addressing the challenges posed by hypoxia or inadequate vascularization. Herein, we discussed the key role of oxygen in bone regeneration, various oxygen source materials and their mechanism of oxygen release, the fabrication techniques employed for oxygen-releasing matrices, and novel emerging approaches for oxygen delivery that hold promise for their potential application in the field of bone regeneration.

A calcium peroxide incorporated oxygen releasing chitosan-PVA patch for Diabetic wound healing

Impaired wound healing is a major healthcare problem in patients with diabetes often resulting in gangrene, microbial infection and amputation of affected limb. The delay or absence in healing process arises from several abnormalities, among them chronic hypoxia is a major concern due to its associated issues such as lack of collagen deposition, epithelization, fibroplasia, angiogenesis, and resistance to infections at the wound site. To address hypoxia, delivery of oxygen at the wound site through oxygen releasing agents have been proven to be effective therapeutics. Several oxygen releasing nanoparticles such as Sodium Percarbonate (SPC), Calcium Peroxide (CPO), Hydrogen Peroxide, Magnesium Peroxide (MPO) have been investigated in wound healing application. However, the uncontrolled/burst release of these nanotherapeutic agents and its accompanied cytotoxicity pose a barrier in expediting the healing process. In this study, a Chitosan-Polyvinyl alcohol (CS-PVA) based hydrogel containing oxygen releasing nanoparticle, calcium peroxide (CPO) was constructed to provide a slow and sustained delivery of oxygen for at least 5 days. In-vitro cell culture studies with this material using fibroblast and endothelial cell line exhibited improved biocompatibility, cell viability and enhanced proliferation in comparison with the control group. Additionally, cell migration study using scratch assay method showed superior cell migration ability of our proposed materials. Furthermore, In vivo study using diabetic rat model showed accelerated wound closure rate compared to untreated control wounds.

Advances in 3D Bioprinting: Techniques, Applications, and Future Directions for Cardiac Tissue Engineering

Cardiovascular diseases are the leading cause of morbidity and mortality in the United States. Cardiac tissue engineering is a direction in regenerative medicine that aims to repair various heart defects with the long-term goal of artificially rebuilding a full-scale organ that matches its native structure and function. Three-dimensional (3D) bioprinting offers promising applications through its layer-by-layer biomaterial deposition using different techniques and bio-inks. In this review, we will introduce cardiac tissue engineering, 3D bioprinting processes, bioprinting techniques, bio-ink materials, areas of limitation, and the latest applications of this technology, alongside its future directions for further innovation.

Insight on Oxygen-Supplying Biomaterials Used to Enhance Cell Survival, Retention, and Engraftment for Tissue Repair

Oxygen is one of the essential requirements for cell survival, retention, and proliferation. The field of regenerative medicine and tissue engineering (TE) has realized considerable achievements for the regeneration of tissues. However, tissue regeneration still lacks the full functionality of solid organ implantations; limited cell survival and retention due to oxidative stress and hypoxia in the deeper parts of tissues remains a perpetual challenge. Especially prior to neovascularization, hypoxia is a major limiting factor, since oxygen delivery becomes crucial for cell survival throughout the tissue-engineered construct. Oxygen diffusion is generally limited in the range 100-200 μm of the thickness of a scaffold, and the cells located beyond this distance face oxygen deprivation, which ultimately leads to hypoxia. Furthermore, before achieving functional anastomosis, implanted tissues will be depleted of oxygen, resulting in hypoxia (<5% dissolved oxygen) followed by anoxic (<0.5% dissolved oxygen) microenvironments. Different types of approaches have been adopted to establish a sustained oxygen supply both in vitro and in vivo. In this review, we have summarized the recent developments in oxygen-generating and/or releasing biomaterials for enhancing cell survival in vitro, as well as for promoting soft and hard tissue repair, including skin, heart, nerve, pancreas, muscle, and bone tissues in vivo. In addition, redox-scavenging biomaterials and oxygenated scaffolds have also been highlighted. The surveyed results have shown significant promise in oxygen-producing biomaterials and oxygen carriers for enhancing cell functionality for regenerative medicine and TE applications. Taken together, this review provides a detailed overview of newer approaches and technologies for oxygen production, as well as their applications for bio-related disciplines.

Oxygen-Generating Biomaterials for Translational Bone Regenerative Engineering

Successful regeneration of critical-size defects remains one of the significant challenges in regenerative engineering. These large-scale bone defects are difficult to regenerate and are often reconstructed with matrices that do not provide adequate oxygen levels to stem cells involved in the regeneration process. Hypoxia-induced necrosis predominantly occurs in the center of large matrices since the host tissue's local vasculature fails to provide sufficient nutrients and oxygen. Indeed, utilizing oxygen-generating materials can overcome the central hypoxic region, induce tissue in-growth, and increase the quality of life for patients with extensive tissue damage. This article reviews recent advances in oxygen-generating biomaterials for translational bone regenerative engineering. We discussed different oxygen-releasing and delivery methods, fabrication methods for oxygen-releasing matrices, biology, oxygen's role in bone regeneration, and emerging new oxygen delivery methods that could potentially be used for bone regenerative engineering.

Oxygen-Releasing Hyaluronic Acid-Based Dispersion with Controlled Oxygen Delivery for Enhanced Periodontal Tissue Engineering

Periodontitis is a chronic biofilm-associated inflammatory disease of the tooth-supporting tissues that causes tooth loss. It is strongly associated with anaerobic bacterial colonization and represents a substantial global health burden. Due to a local hypoxic environment, tissue regeneration is impaired. Oxygen therapy has shown promising results as a potential treatment of periodontitis, but so far, local oxygen delivery remains a key technical challenge. An oxygen (O₂)-releasing hyaluronic acid (HA)-based dispersion with a controlled oxygen delivery was developed. Cell viability of primary human fibroblasts, osteoblasts, and HUVECs was demonstrated, and biocompatibility was tested using a chorioallantoic membrane assay (CAM assay). Suppression of anaerobic growth of Porphyromonas gingivalis was shown using the broth microdilution assay. In vitro assays showed that the O₂-releasing HA was not cytotoxic towards human primary fibroblasts, osteoblasts, and HUVECs. In vivo, angiogenesis was enhanced in a CAM assay, although not to a statistically significant degree. Growth of P. gingivalis was inhibited by CaO₂ concentrations higher than 256 mg/L. Taken together, the results of this study demonstrate the biocompatibility and selective antimicrobial activity against P. gingivalis for the developed O₂-releasing HA-based dispersion and the potential of O₂-releasing biomaterials for periodontal tissue regeneration.

Harnessing the potential of oxygen-generating materials and their utilization in organ-specific delivery of oxygen

The limited availability of transplantable organs hinders the success of patient treatment through organ transplantation. In addition, there are challenges with immune rejection and the risk of disease transmission when receiving organs from other individuals. Tissue engineering aims to overcome these challenges by generating functional three-dimensional (3D) tissue constructs. When developing tissues or organs of a particular shape, structure, and size as determined by the specific needs of the therapeutic intervention, a tissue specific oxygen supply to all parts of the tissue construct is an utmost requirement. Moreover, the lack of a functional vasculature in engineered tissues decreases cell survival upon implantation in the body. Oxygen-generating materials can alleviate this challenge in engineered tissue constructs by providing oxygen in a sustained and controlled manner. Oxygen-generating materials can be incorporated into 3D scaffolds allowing the cells to receive and utilize oxygen efficiently. In this review, we present an overview of the use of oxygen-generating materials in various tissue engineering applications in an organ specific manner as well as their potential use in the clinic.

Oxygen-Generating Scaffolds for Cardiac Tissue Engineering Applications

Homogeneous vascularization of implanted tissue constructs can extend to 5 weeks, during which cell death can occur due to inadequate availability of oxygen. Researchers are engineering biomaterials that generate and release oxygen in a regulated manner, in an effort to overcome this hurdle. A main limitation of the existing oxygen-generating biomaterials is the uncontrolled release of oxygen, which is ultimately detrimental to the cells. This study demonstrates the incorporation of calcium peroxide (CaO2) within a hydrophobic polymer, polycaprolactone (PCL), to yield composite scaffolds with controlled oxygen release kinetics sustained over 5 weeks. Oxygen-generating microparticles coencapsulated with cardiomyocytes in a gelatin-based hydrogel matrix can serve as model systems for cardiac tissue engineering. Specifically, the results reveal that the oxygen-generating microspheres significantly improve the scaffold mechanical strength ranging from 5 kPa to 35 kPa, have an average scaffold pore size of 50-100 μm, swelling ratios of 33.3-29.8%, and degradation with 10-49% remaining mass at the end of a 48 h accelerated enzymatic degradation. The oxygen-generating scaffolds demonstrate improvement in cell viability, proliferation, and metabolic activity compared to the negative control group when cultured under hypoxia. Additionally, the optimized oxygen-generating constructs display no cytotoxicity or apoptosis. These oxygen-generating scaffolds can possibly assist the in vivo translation of cardiac tissue constructs.

Core-shell oxygen-releasing fibers for annulus fibrosus repair in the intervertebral disc of rats

The repair of annulus fibrosus (AF) defect after discectomy in the intervertebral disc (IVD) has presented a challenge over the past decade. Hostile microenvironments in the IVD, including, compression and hypoxia, are critical issues that require special attention. Till date, little information is available on potential strategies to cope with the hypoxia dilemma in AF defect sites. In this study, perfluorotributylamine (PFTBA) core-shell fibers were fabricated by coaxial electrospinning to construct oxygen-releasing scaffold for promoting endogenous repair in the AF after discectomy. We demonstrated that PFTBA fibers (10% chitosan, chitosan: PCL, 1:6) could release oxygen for up to 144 ​h. The oxygen released from PFTBA fibers was found to protect annulus fibrosus stem cells (AFSCs) from hypoxia-induced apoptosis. In addition, the PFTBA fibers were able to promote proliferation, migration and extracellular matrix (ECM) production in AFSCs under hypoxia, highlighting their therapeutic potential in AF defect repair. Subsequent in vivo studies demonstrated that oxygen-supplying fibers were capable of ameliorating disc degeneration after discectomy, which was evidenced by improved disc height and morphological integrity in rats with the oxygen-releasing scaffolds. Further transcriptome analysis indicated that differential expression genes (DEGs) were enriched in "oxygen transport" and "angiogenesis", which likely contributed to their beneficial effect on endogenous AF regeneration. In summary, the oxygen-releasing scaffold provides novel insights into the oxygen regulation by bioactive materials and raises the therapeutic possibility of oxygen supply strategies for defect repair in AF, as well as other aerobic tissues.

A hydrogel-fiber-hydrogel composite scaffold based on silk fibroin with the dual-delivery of oxygen and quercetin

Supplying sufficient oxygen within the scaffolds is one of the essential hindrances in tissue engineering that can be resolved by oxygen-generating biomaterials (OGBs). Two main issues related to OGBs are controlling oxygenation and reactive oxygen species (ROS). To address these concerns, we developed a composite scaffold entailing three layers (hydrogel-electrospun fibers-hydrogel) with antioxidant and antibacterial properties. The fibers, the middle layer, reinforced the composite structure, enhancing the mechanical strength from 4.27 ± 0.15 to 8.27 ± 0.25 kPa; also, this layer is made of calcium peroxide and silk fibroin (SF) through electrospinning, which enables oxygen delivery. The first and third layers are physical SF hydrogels to control oxygen release, containing quercetin (Q), a nonenzymatic antioxidant. This composite scaffold resulted in almost more than 40 mmHg of oxygen release for at least 13 days, and compared with similar studies is in a high range. Here, Q was used for the first time for an OGB to scavenge the possible ROS. Q delivery not only led to antioxidant activity but also stabilized oxygen release and enhanced cell viability. Based on the given results, this composite scaffold can be introduced as a safe and controllable oxygen supplier, which is promising for tissue engineering applications, particularly for bone.

Oxygen-Generating Scaffolds: One Step Closer to the Clinical Translation of Tissue Engineered Products

The lack of oxygen supply in engineered constructs has been an ongoing challenge for tissue engineering and regenerative medicine. Upon implantation of an engineered tissue, spontaneous blood vessel formation does not happen rapidly, therefore, there is typically a limited availability of oxygen in engineered biomaterials. Providing oxygen in large tissue-engineered constructs is a major challenge that hinders the development of clinically relevant engineered tissues. Similarly, maintaining adequate oxygen levels in cell-laden tissue engineered products during transportation and storage is another hurdle. There is an unmet demand for functional scaffolds that could actively produce and deliver oxygen, attainable by incorporating oxygen-generating materials. Recent approaches include encapsulation of oxygen-generating agents such as solid peroxides, liquid peroxides, and fluorinated substances in the scaffolds. Recent approaches to mitigate the adverse effects, as well as achieving a sustained and controlled release of oxygen, are discussed. Importance of oxygen-generating materials in various tissue engineering approaches such as ex vivo tissue engineering, in situ tissue engineering, and bioprinting are highlighted in detail. In addition, the existing challenges, possible solutions, and future strategies that aim to design clinically relevant multifunctional oxygen-generating biomaterials are provided in this review paper.

Oxygen-releasing hydrogels promote burn healing under hypoxic conditions

Hypoxic nonhealing wounds are a common complication in chronic patients, and chronic hypoxia is the main reason for delayed wound healing, so local wound oxygenation may be an effective way to address this problem. Here, we proposed a system consisting of oxygen-releasing microsphere (GC) and self-healing hydrogel (QGO). QGO/GC hydrogel could promote survival, migration and tube formation of human umbilical vein endothelial cells under hypoxic conditions. Moreover, QGO/GC hydrogels exhibited biocompatibility in vitro and in vivo. The hypoxic mouse burn model further confirmed that QGO/GC hydrogel could promote tissue repair by reducing inflammation (TNF-α and IL-1β), increasing angiogenesis (CD31, VEGF and α-SMA) and collagen deposition. This study provided an effective oxygen-releasing hydrogel that could offer a simple and effective method for the clinical treatment of chronic hypoxic wounds. STATEMENT OF SIGNIFICANCE: Burn injury is caused by various exogenous factors such as friction, cold, radiations, electricity, chemicals, hot surfaces or liquids. Severe burn can damage the entire skin layer, and the healing process is delayed due to an unbalanced inflammatory response, excessive reactive oxygen species, lack of angiogenesis (insufficient nutrient and oxygen availability), and susceptibility to infection. In the present study, we proposed an oxygen-releasing hydrogel (QGO/GC). QGO/GC hydrogel could promote survival, migration, and tube formation of human umbilical vein endothelial cells under hypoxic conditions. And QGO/GC hydrogels could promote tissue repair by reducing inflammation, increasing angiogenesis and collagen deposition. This work provided an effective oxygen-releasing hydrogel for the clinical management of chronic hypoxic wounds.

Scaffolds in the microbial resistant era: Fabrication, materials, properties and tissue engineering applications

Due to microbial infections dramatically affect cell survival and increase the risk of implant failure, scaffolds produced with antimicrobial materials are now much more likely to be successful. Multidrug-resistant infections without suitable prevention strategies are increasing at an alarming rate. The ability of cells to organize, develop, differentiate, produce a functioning extracellular matrix (ECM) and create new functional tissue can all be controlled by careful control of the extracellular microenvironment. This review covers the present state of advanced strategies to develop scaffolds with antimicrobial properties for bone, oral tissue, skin, muscle, nerve, trachea, cardiac and other tissue engineering applications. The review focuses on the development of antimicrobial scaffolds against bacteria and fungi using a wide range of materials, including polymers, biopolymers, glass, ceramics and antimicrobials agents such as antibiotics, antiseptics, antimicrobial polymers, peptides, metals, carbon nanomaterials, combinatorial strategies, and includes discussions on the antimicrobial mechanisms involved in these antimicrobial approaches. The toxicological aspects of these advanced scaffolds are also analyzed to ensure future technological transfer to clinics. The main antimicrobial methods of characterizing scaffolds' antimicrobial and antibiofilm properties are described. The production methods of these porous supports, such as electrospinning, phase separation, gas foaming, the porogen method, polymerization in solution, fiber mesh coating, self-assembly, membrane lamination, freeze drying, 3D printing and bioprinting, among others, are also included in this article. These important advances in antimicrobial materials-based scaffolds for regenerative medicine offer many new promising avenues to the material design and tissue-engineering communities.

Co-axial Printing of Convoluted Proximal Tubule for Kidney Disease Modeling

Despite the increasing incidence of kidney-related diseases, we are still far from understanding the underlying mechanisms of these diseases and their progression. This lack of understanding is partly because of a poor replication of the diseases in vitro, limited to planar culture. Advancing towards three-dimensional models, hereby we propose coaxial printing to obtain microfibers containing a helical hollow microchannel. These recapitulate the architecture of the proximal tubule (PT), an important nephron segment often affected in kidney disorders. A stable gelatin/alginate-based ink was formulated to allow printability while maintaining structural properties. Fine tuning of the composition, printing temperature and extrusion rate allowed for optimal ink viscosity that led to coiling of the microfiber's inner channel. The printed microfibers exhibited prolonged structural stability (42 days) and cytocompatibility in culture. Healthy conditionally immortalized PT epithelial cells and a knockout cell model for cystinosis (CTNS^-/-) were seeded to mimic two genotypes of PT. Upon culturing for 14 days, engineered PT showed homogenous cytoskeleton organization as indicated by staining for filamentous actin, barrier-formation and polarization with apical marker α-tubulin and basolateral marker Na⁺/K⁺-ATPase. Cell viability was slightly decreased upon prolonged culturing for 14 days, which was more pronounced inCTNS^-/-microfibers. Finally, cystinosis cells showed reduced apical transport activity in the microfibers compared to healthy PT epithelial cells when looking at breast cancer resistance protein and multidrug resistance-associated protein 4. Engineered PT incorporated in a custom-designed microfluidic chip allowed to assess leak-tightness of the epithelium, which appeared less tight in cystinosis PT compared to healthy PT, in agreement with its in vivo phenotype. While we are still on the verge of patient-oriented medicine, this system holds great promise for further research in establishing advanced in vitro disease models.

Bioartificial livers: a review of their design and manufacture

Acute liver failure (ALF) is a rapidly progressive disease with high morbidity and mortality rates. Liver transplantation and artificial liver support systems, such as artificial livers (ALs) and bioartificial livers (BALs), are the two major therapies for ALF. Compared to ALs, BALs are composed of functional hepatocytes that provide essential liver functions, including detoxification, metabolite synthesis, and biotransformation. Furthermore, BALs can potentially provide effective support as a form of bridging therapy to liver transplantation or spontaneous recovery for patients with ALF. In this review, we systematically discussed the currently available state-of-the-art designs and manufacturing processes for BAL support systems. Specifically, we classified the cell sources and bioreactors that are applied in BALs, highlighted the advanced technologies of hepatocyte culturing and bioreactor fabrication, and discussed the current challenges and future trends in developing next generation BALs for large scale clinical applications.

Photosynthetic microorganisms for the oxygenation of advanced 3D bioprinted tissues

3D bioprinting technology has emerged as a tool that promises to revolutionize the biomedical field, including tissue engineering and regeneration. Despite major technological advancements, several challenges remain to be solved before 3D bioprinted tissues could be fully translated from the bench to the bedside. As oxygen plays a key role in aerobic metabolism, which allows energy production in the mitochondria; as a consequence, the lack of tissue oxygenation is one of the main limitations of current bioprinted tissues and organs. In order to improve tissue oxygenation, recent approaches have been established for a broad range of clinical applications, with some already applied using 3D bioprinting technologies. Among them, the incorporation of photosynthetic microorganisms, such as microalgae and cyanobacteria, is a promising approach that has been recently explored to generate chimerical plant-animal tissues where, upon light exposure, oxygen can be produced and released in a localized and controlled manner. This review will briefly summarize the state-of-the-art approaches to improve tissue oxygenation, as well as studies describing the use of photosynthetic microorganisms in 3D bioprinting technologies. STATEMENT OF SIGNIFICANCE: 3D bioprinting technology has emerged as a tool for the generation of viable and functional tissues for direct in vitro and in vivo applications, including disease modeling, drug discovery and regenerative medicine. Despite the latest advancements in this field, suboptimal oxygen delivery to cells before, during and after the bioprinting process limits their viability within 3D bioprinted tissues. This review article first highlights state-of-the-art approaches used to improve oxygen delivery in bioengineered tissues to overcome this challenge. Then, it focuses on the emerging roles played by photosynthetic organisms as novel biomaterials for bioink generation. Finally, it provides considerations around current challenges and novel potential opportunities for their use in bioinks, by comparing latest published studies using algae for 3D bioprinting.

Oxygenation therapies for improved wound healing: Current trends and technologies

Degree of oxygenation is one of the important parameters governing various processes, including cell proliferation, angiogenesis, extracellular matrix production, and even combating the microbial burden at the wound site, all...

Core-Shell Microcapsules: Biofabrication and Potential Applications in Tissue Engineering and Regenerative Medicine

The construction of biomaterial scaffolds that accurately recreate the architecture of living tissues in vitro is a major challenge in the field of tissue engineering and regenerative medicine. Core-shell microcapsules...

A First in Human Trial Implanting Microalgae Shows Safety of Photosynthetic Therapy for the Effective Treatment of Full Thickness Skin Wounds

Insufficient oxygen supply represents a relevant issue in several fields of human physiology and medicine. It has been suggested that the implantation of photosynthetic cells can provide oxygen to tissues in the absence of a vascular supply. This approach has been demonstrated to be successful in several in vitro and in vivo models; however, no data is available about their safety in human patients. Here, an early phase-1 clinical trial (ClinicalTrials.gov identifier: NCT03960164, https://clinicaltrials.gov/ct2/show/NCT03960164) is presented to evaluate the safety and feasibility of implanting photosynthetic scaffolds for dermal regeneration in eight patients with full-thickness skin wounds. Overall, this trial shows that the presence of the photosynthetic microalgae Chlamydomonas reinhardtii in the implanted scaffolds did not trigger any deleterious local or systemic immune responses in a 90 days follow-up, allowing full tissue regeneration in humans. The results presented here represent the first attempt to treat patients with photosynthetic cells, supporting the translation of photosynthetic therapies into clinics.

Clinical Trial Registration:www.clinicaltrials.gov/ct2/show/NCT03960164, identifier: NCT03960164.

Photosynthetic symbiotic therapeutics - An innovative, effective treatment for ischemic cardiovascular diseases

Ischemic heart disease is a major cause of global morbidity and mortality, affecting over 15 million patients in the United States. Recent advances in research and innovation have greatly broadened clinicians' ability to treatment ischemic heart disease and associated heart failure using various preventive, pharmacologic, and surgical strategies. Specifically, innovative photosynthetic symbiotic systems using Synechococcus elongatus has gained significant attention. S. elongatus is a unicellular cyanobacterium that can carry out oxygenic photosynthesis. Photosynthetic therapies have been developed to rescue ischemic tissue by taking up tissue-derived carbon dioxide and in turn releasing oxygen for sustained aerobic metabolism during ischemia. In this article, we review the application of cyanobacteria, specifically S. elongatus, in the field of biotechnology, ischemic heart disease, and other clinical applications in ischemic diseases. We also address the motivation for innovation and current limitations in the field of S. elongatus photosynthetic therapeutics for ischemic cardiovascular disease.

A review on biomaterials for ovarian tissue engineering

Considerable challenges in engineering the female reproductive tissue are the follicle's unique architecture, the need to recapitulate the extracellular matrix, and tissue vascularization. Over the years, various strategies have been developed for preserving fertility in women diagnosed with cancer, such as embryo, oocyte, or ovarian tissue cryopreservation. While autotransplantation of cryopreserved ovarian tissue is a viable choice to restore fertility in prepubertal girls and women who need to begin chemo- or radiotherapy soon after the cancer diagnosis, it is not suitable for all patients due to the risk of having malignant cells present in the ovarian fragments in some types of cancer. Advances in tissue engineering such as 3D printing and ovary-on-a-chip technologies have the potential to be a translational strategy for precisely recapitulating normal tissue in terms of physical structure, vascularization, and molecular and cellular spatial distribution. This review first introduces the ovarian tissue structure, describes suitable properties of biomaterials for ovarian tissue engineering, and highlights recent advances in tissue engineering for developing an artificial ovary. STATEMENT OF SIGNIFICANCE: The increase of survival rates in young cancer patients has been accompanied by a rise in infertility/sterility in cancer survivors caused by the gonadotoxic effect of some chemotherapy regimens or radiotherapy. Such side-effect has a negative impact on these patients' quality of life as one of their main concerns is generating biologically related children. To aid female cancer patients, several research groups have been resorting to tissue engineering strategies to develop an artificial ovary. In this review, we discuss the numerous biomaterials cited in the literature that have been tested to encapsulate and in vitro culture or transplant isolated preantral follicles from human and different animal models. We also summarize the recent advances in tissue engineering that can potentially be optimal strategies for developing an artificial ovary.

Microparticles orchestrating cell fate in bottom-up approaches

The modulation of cells in tissue formation is still one of the hardest tasks to achieve in Tissue Engineering. To control the cell response when undergoing their normal functions such as adhesion, differentiation, assembly, or maturation is vital the development of more successful solutions. Herein, we discuss how microparticles are being overlooked in their potential for controlling the cellular response. Until now, their role was quite often restricted to a reservoir of chemical compounds or as carriers for cell expansion. Nevertheless, microparticles design with the introduction of biophysical and biochemical cues can effectively modulate cell response.

Effective tumor vessel barrier disruption mediated by perfluoro-N-(4-methylcyclohexyl) piperidine nanoparticles to enhance the efficacy of photodynamic therapy

BACKGROUND

Currently, limited tumor drug permeation, poor oxygen perfusion and immunosuppressive microenvironments are the most important bottlenecks that significantly reduce the efficacy of photodynamic therapy (PDT). The main cause of these major bottlenecks is the platelet activation maintained abnormal tumor vessel barriers. Thus, platelet inhibition may present a new way to most effectively enhance the efficacy of PDT. However, to the best of our knowledge, few studies have validated the effectiveness of such a way in enhancing the efficacy of PDT both in vivo and in vitro. In this study, perfluoro-N-(4-methylcyclohexyl) piperidine-loaded albumin (PMP@Alb) nanoparticles were discovered, which possess excellent platelet inhibition ability. After PMP@Alb treatment, remarkably enhanced intra-tumoral drug accumulation, oxygen perfusion and T cell infiltration could be observed owing to the disrupted tumor vessel barriers. Besides, the effect of ICG@Lip mediated PDT was significantly amplified by PMP@Alb nanoparticles. It was demonstrated that PMP@Alb could be used as a useful tool to improve the efficacy of existing PDT by disrupting tumor vessel barriers through effective platelet inhibition.

Recent advances in bioprinting technologies for engineering hepatic tissue

In the sphere of liver tissue engineering (LTE), 3D bioprinting has emerged as an effective technology to mimic the complex in vivo hepatic microenvironment, enabling the development of functional 3D constructs with potential application in the healthcare and diagnostic sector. This review gears off with a note on the liver's microscopic 3D architecture and pathologies linked to liver injury. The write-up is then directed towards unmasking recent advancements and prospects of bioprinting for recapitulating 3D hepatic structure and function. The article further introduces available stem cell opportunities and different strategies for their directed differentiation towards various hepatic stem cell types, including hepatocytes, hepatic sinusoidal endothelial cells, stellate cells, and Kupffer cells. Another thrust of the article is on understanding the dynamic interplay of different hepatic cells with various microenvironmental cues, which is crucial for controlling differentiation, maturation, and maintenance of functional hepatic cell phenotype. On a concluding note, various critical issues and future research direction towards clinical translation of bioprinted hepatic constructs are discussed.