Injectable chitosan/collagen hydrogels nano-engineered with functionalized single wall carbon nanotubes for minimally invasive applications in bone

Bioinspired smart dentin ECM-chitosan hydrogels for dentin-pulp complex regeneration

OBJECTIVES

Approximately two-thirds of the world's population suffers from dental caries, and clinical treatment of the resulting lesions varies from dental fillings to devitalization. Despite recent advances in regenerative endodontic therapy, scaffolds intended for the regeneration of the dentin-pulp complex with innate odontogenic potential and microarchitecture similar to these dental tissues are still scarce. Taking advantage of the physio-biological properties of demineralized dentin extracellular matrix (ECM), we developed a functional hydrogel that combines insoluble molecules of dentin with chitosan.

METHODS

Dentin powder obtained from extracted teeth was partially demineralized with acetic acid. Demineralized dentin and chitosan powder were separately dissolved in acetic acid to form suspensions that were then mixed in volume ratios of 25/75 or 50/50 (v/v %). The extrudability and gelation time of hydrogel precursors were assessed. Three-dimensional constructs were fabricated following pre-hydrogels pH-adjustment, injection into custom-made molds and incubation at 37 °C. Constructs were characterized for infrared spectral analysis, relative sol-gel fraction, degree of porosity, flexural elastic modulus, in-vitro biodegradability, in-vitro bioactivity, antimicrobial properties against Enterococcus faecalis and biocompatibility for OD-21 cells.

RESULTS

For most of the tested properties, the two proposed hydrogels showed differences, but regardless of these differences, both materials presented morphology, biomechanical attributes, cytocompatibility, and antibacterial properties to serve as dental pulp cell-inducing scaffolds.

CONCLUSIONS

Dentin ECM-chitosan hydrogels exhibited in-vitro bioactivity, biocompatibility, and antimicrobial properties to be considered as promising candidates for application as injectable scaffolds for dentin-pulp complex regeneration.

CLINICAL SIGNIFICANCE

Extracellular matrices (ECMs) from native tissues have long been considered ideal scaffolds for tissue regeneration. Here, we describe the physicochemical, mechanical, and biological attributes of newly developed hydrogels derived from the functionalization of demineralized dentin ECM with chitosan. The proposed dentin-ECM-chitosan hydrogels have demonstrable microarchitecture, biophysical characteristics, biocompatibility, and antibacterial capacity to produce cell-inducing scaffolds for use in regenerative dentistry.

A novel approach for the co-delivery of 5-fluorouracil and everolimus for breast cancer combination therapy: stimuli-responsive chitosan hydrogel embedded with mesoporous silica nanoparticles

BACKGROUND

Breast cancer remains one of the leading causes of death among women globally, with traditional therapies often limited by challenges such as drug resistance and significant side effects. Combination therapies, coupled with nanotechnology-based co-delivery systems, offer enhanced efficacy by targeting multiple pathways in cancer progression. In this study, we developed an injectable, stimuli-responsive nanosystem using a chitosan hydrogel embedded with mesoporous silica nanoparticles for the co-administration of 5-fluorouracil and everolimus. This approach aims to optimize controlled drug release, enhance the synergistic anticancer effect, and overcome challenges associated with co-loading different therapeutic agents.

METHODS

Various techniques were employed to characterize the nanoparticles and the hydrogel. Cell uptake, apoptosis, and proliferation of 4T1 breast cancer cells were evaluated by flow cytometry and Resazurin assay, respectively. The Balb/C mice model of breast cancer, which received the therapeutical nanoplatforms subcutaneously near the tumoral region was used to examine tumor size and lung metastases.

RESULTS

The results revealed that the nanoparticles had a suitable loading capacity and high cellular uptake. The drug release was pH-sensitive and synergistic. By incorporating nanoparticles into the hydrogel, the cell death rate and apoptosis of 4T1 breast cancer cells increased significantly, due to the synergistic effects of co-delivered drugs. Additionally, the combination treatment groups showed a significant reduction in tumor size and lung metastasis compared to the monotherapy and control groups.

CONCLUSIONS

These findings underscore the potential of the nanocomposite used to develop a novel co-delivery system to enhance therapeutic outcomes, reduce side effects, and provide a promising new strategy for future cancer treatments.

Bioengineered Injectable Hydrogel Based on the Dentin Extracellular Matrix and Chitosan

The extracellular matrix of dentin contains macromolecules of biological value that make it a natural source for the prospection of novel smart biomaterials. Here, we described the development of an injectable thermosensitive smart hydrogel resulting from the blending of insoluble macromolecules of the dentin matrix and chitosan. The extrudability and gelation parameters of the prehydrogel were optimized by varying the concentration of individual components. Three-dimensional constructs were fabricated upon injection of the prehydrogel into custom-made molds, followed by incubation at 37 °C. Specimens were characterized for spectral, physical, morphological, mechanical, and biocompatibility features. Fourier-transform infrared (FTIR) analyses confirmed the integration of the dentin organic matrix and chitosan. The degree of porosity of constructs was ∼51%. The water diffusion of constructs reached a plateau after 2 days. Their moduli of elasticity were at a low MPa order, decreasing after storage in simulated body fluid (SBF). The biodegradability of constructs rose following incubation in SBF containing lysozyme or zinc ions. Hydrogel bioactivity was confirmed by FTIR and ultramorphologically suggested by surface precipitates. Hydrogel constructs were shown to be biocompatible with undifferentiated pulp cells (OD-21). Overall, the novel engineered injectable hydrogel based on dentin extracellular macromolecules and chitosan holds promising features for use as a scaffold for the regeneration of damaged load-bearing tissues like dentin and bone.

Bone Regeneration: A Review of Current Treatment Strategies

Bone regeneration has emerged as a critical research and clinical advancement field, fueled by the growing demand for effective treatments in orthopedics and oncology. Over the past two decades, significant progress in biomaterials and surgical techniques has led to the development of novel solutions for treating bone defects, surpassing the use of traditional autologous grafts. This review aims to assess the latest approaches in bone regeneration, including autologous, allogenic, and xenogenic grafts, naturally derived biomaterials, and innovative synthetic substitutes such as bioceramics, bioactive glasses, metals, polymers, composite materials, and other specialized applications. A comprehensive literature search was conducted on PubMed, focusing on studies published between 2019 and 2024, including meta-analyses, reviews, and systematic reviews. The review evaluated a range of bone regeneration strategies, examining the clinical outcomes, materials used, surgical techniques, and the effectiveness of various approaches in treating bone defects. The search identified numerous studies, with the inclusion criteria focused on those exploring innovative bone regeneration strategies. These studies provided valuable insights into the clinical and biological outcomes of different biomaterials and graft types. Results indicated that while advancements in synthetic and naturally derived biomaterials show promising potential, challenges remain in optimizing therapeutic strategies across diverse patient populations and clinical settings. The findings emphasize the need for an integrated approach that combines scientific research, clinical practice, and technological innovation to improve bone regeneration therapies. Further research is required to establish standardized protocols and determine the optimal application of various materials and techniques to enhance patient outcomes and the quality of care.

Cartilage and bone injectable hydrogels: A review of injectability methods and treatment strategies for repair in tissue engineering

Cartilage and bone are crucial tissues causing disability in the elderly population, often requiring prolonged treatment and surgical intervention due to limited regenerative capacity. Injectable hydrogels that closely mimic the extracellular matrix (ECM) of native hard tissue have attracted attention due to their minimally invasive application and ability to conform to irregular defect sites. These hydrogels facilitate key biological processes such as cell migration, chondrogenesis in cartilage repair, osteoinduction, angiogenesis, osteoconduction, and mineralization in bone repair. This review analyzes in-vitro and in-vivo biomedical databases over the past decade to identify advancements in hydrogel formulations, crosslinking mechanisms, and biomaterial selection for cartilage and bone tissue engineering. The review emphasizes the effectiveness of injectable hydrogels as carriers for cells, growth factors, and drugs, offering additional therapeutic benefits. The relevance of these findings is discussed in the context of their potential to serve as a robust alternative to current surgical and non-surgical treatments. This review also examines the advantages of injectable hydrogels, such as ease of administration, reduced patient recovery time, and enhanced bioactivity, thereby emphasizing their potential in clinical applications for cartilage and bone regeneration with emphasis on addressing the shortcomings of current treatments.

Selenium nanoparticle-functionalized injectable chitosan/collagen hydrogels as a novel therapeutic strategy to enhance stem cell osteoblastic differentiation for bone regeneration

Stem cells are an essential consideration in the fields of tissue engineering and regenerative medicine. Understanding how nanoengineered biomaterials and mesenchymal stem cells (MSCs) interact is crucial for their role in bone regeneration. Taking advantage of the structural stability of selenium nanoparticles (Se-NPs) and biological properties of natural polymers, Se-NPs-functionalized, injectable, thermoresponsive hydrogels with an interconnected molecular structure were prepared to identify their role in the osteogenic differentiation of different types of mesenchymal stem cells. Further, comprehensive characterization of their structural and biological properties was performed. The results showed that the hydrogels undergo a sol to gel transition with the help of β-glycerophosphate, while functionalization with Se-NPs significantly enhances their biological response through stabilizing their polymeric structure by forming Se-O covalent bonds. Further results suggest that Se-NPs enhance the differentiation of MSCs toward osteogenic lineage in both the 2D as well as 3D. We demonstrated that the Se-NPs-functionalized hydrogels could enhance the differentiation of osteoporotic bone-derived MSCs. We also focused on specific cell surface marker expression (CD105, CD90, CD73, CD45, CD34) based on the exposure of healthy rats' bone marrow-derived stem cells (BMSCs) to the Se-NP-functionalized hydrogels. This study provides essential evidence for pre-clinical/clinical applications, highlighting the potential of the nanoengineered biocompatible elastic hydrogels for bone regeneration in diseased bone.

Contactless magnetically responsive injectable hydrogel for aligned tissue regeneration

Cellular alignment plays a pivotal role in several human tissues, including skeletal muscle, spinal cord and tendon. Various techniques have been developed to control cellular alignment using 3D biomaterials. However, the majority of 3D-aligned scaffolds require invasive surgery for implantation. In contrast, injectable hydrogels provide a non-invasive delivery method, gaining considerable attention for the treatment of diverse conditions, including osteochondral lesions, volumetric muscle loss, and traumatic brain injury. We engineered a biomimetic hydrogel with magnetic responsiveness by combining gellan gum, hyaluronic acid, collagen, and magnetic nanoparticles (MNPs). Collagen type I was paired with MNPs to form magnetic collagen bundles (MCollB), allowing the orientation control of these bundles within the hydrogel matrix through the application of a remote low-intensity magnetic field. This resulted in the creation of an anisotropic architecture. The hydrogel mechanical properties were comparable to those of human soft tissues, such as skeletal muscle, and proof of the aligned hydrogel concept was demonstrated. In vitro findings confirmed the absence of toxicity and pro-inflammatory effects. Notably, an increased fibroblast cell proliferation and pro-regenerative activation of macrophages were observed. The in-vivo study further validated the hydrogel biocompatibility and demonstrated the feasibility of injection with rapid in situ gelation. Consequently, this magnetically controlled injectable hydrogel exhibits significant promise as a minimally invasive, rapid gelling and effective treatment for regenerating various aligned human tissues.

Use of marine occurrent extracts to enhance the stability of dentin extracellular matrix

Chitosan (CS) and phloroglucinol (PhG), two extracts abundantly found in marine life, were investigated for their ability to biomodify demineralized dentin by enhancing collagen crosslinks and improving dentin extracellular matrix (ECM) mechanical and biochemical stability. Dentin obtained from non-carious extracted human molars were demineralized with phosphoric acid. Baseline Fourier-transform infrared (FTIR) spectra, apparent flexural elastic modulus (AE) and dry mass (DM) of each specimen were independently acquired. Specimens were randomly incubated for 5 min into either ultrapure water (no-treatment), 1% glutaraldehyde (GA), 1% CS or 1% PhG. Water and GA were used, respectively, as a negative and positive control for collagen crosslinks. Specimens' post-treatment FTIR spectra, AE, and DM were obtained and compared with correspondent baseline measurements. Additionally, the host-derived proteolytic activity of dentin ECM was assessed using hydroxyproline assay (HYP) and spectrofluorometric analysis of a fluorescent-quenched substrate specific for matrix metalloproteinases (MMPs). Finally, the bond strength of an etch-and-rinse adhesive was evaluated after application of marine compounds as non-rinsing dentin primers. Dentin specimens FTIR spectral profile changed remarkably, and their AE increased significantly after treatment with marine compounds. DM variation, HYP assay and fluorogenic substrate analysis concurrently indicated the biodegradation of CS- and PhG-treated specimens was significantly lesser in comparison with untreated specimens. CS and PhG treatments enhanced biomechanical/biochemical stability of demineralized dentin. These novel results show that PhG is a primer with the capacity to biomodify demineralized dentin, hence rendering it less susceptible to biodegradation by host-proteases.

Bioactive injectable mucoadhesive thermosensitive natural polymeric hydrogels for oral bone and periodontal regeneration

Periodontitis is an inflammation-related condition, caused by an infectious microbiome and host defense that causes damage to periodontium. The natural processes of the mouth, like saliva production and eating, significantly diminish therapeutic medication residency in the region of periodontal disease. Furthermore, the complexity and diversity of pathological mechanisms make successful periodontitis treatment challenging. As a result, developing enhanced local drug delivery technologies and logical therapy procedures provides the foundation for effective periodontitis treatment. Being biocompatible, biodegradable, and easily administered to the periodontal tissues, hydrogels have sparked substantial an intense curiosity in the discipline of periodontal therapy. The primary objective of hydrogel research has changed in recent years to intelligent thermosensitive hydrogels, that involve local adjustable sol-gel transformations and regulate medication release in reaction to temperature, we present a thorough introduction to the creation and efficient construction of new intelligent thermosensitive hydrogels for periodontal regeneration. We also address cutting-edge smart hydrogel treatment options based on periodontitis pathophysiology. Furthermore, the problems and prospective study objectives are reviewed, with a focus on establishing effective hydrogel delivery methods and prospective clinical applications.

Effect of different crosslinking agents on hybrid chitosan/collagen hydrogels for potential tissue engineering applications

Tissue engineering (TE) demands scaffolds that have the necessary resistance to withstand the mechanical stresses once implanted in our body, as well as excellent biocompatibility. Hydrogels are postulated as interesting materials for this purpose, especially those made from biopolymers. In this study, the microstructure and rheological performance, as well as functional and biological properties of chitosan and collagen hydrogels (CH/CG) crosslinked with different coupling agents, both natural such as d-Fructose (F), genipin (G) and transglutaminase (T) and synthetic, using a combination of 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride with N-hydroxysuccinimide (EDC/NHS) will be assessed. FTIR tests were carried out to determine if the proposed crosslinking reactions for each crosslinking agent occurred as expected, obtaining positive results in this aspect. Regarding the characterization of the properties of each system, two main trends were observed, from which it could be established that crosslinking with G and EDC-NHS turned out to be more effective and beneficial than with the other two crosslinking agents, producing significant improvements with respect to the base CH/CG hydrogel. In addition, in vitro tests demonstrated the potential application in TE of these systems, especially for those crosslinked with G, T and EDC-NHS.

Injecting hope: chitosan hydrogels as bone regeneration innovators

Spontaneous bone regeneration encounters substantial restrictions in cases of bone defects, demanding external intervention to improve the repair and regeneration procedure. The field of bone tissue engineering (BTE), which embraces a range of disciplines, offers compelling replacements for conventional strategies like autografts, allografts, and xenografts. Among the diverse scaffolding materials utilized in BTE applications, hydrogels have demonstrated great promise as templates for the regeneration of bone owing to their resemblance to the innate extracellular matrix. In spite of the advancement of several biomaterials, chitosan (CS), a natural biopolymer, has garnered significant attention in recent years as a beneficial graft material for producing injectable hydrogels. Injectable hydrogels based on CS formulations provide numerous advantages, including their capacity to absorb and preserve a significant amount of water, their minimally invasive character, the existence of porous structures, and their capability to adapt accurately to irregular defects. Moreover, combining CS with other naturally derived or synthetic polymers and bioactive materials has displayed its effectiveness as a feasible substitute for traditional grafts. We aim to spotlight the composition, production, and physicochemical characteristics and practical utilization of CS-based injectable hydrogels, explicitly focusing on their potential implementations in bone regeneration. We consider this review a fundamental resource and a source of inspiration for future research attempts to pioneer the next era of tissue-engineering scaffold materials.

Nanocomposite Hydrogels Based on Poly(vinyl alcohol) and Carbon Nanotubes for NIR-Light Triggered Drug Delivery

Photothermal nanocomposite hydrogels are promising materials for remotely triggering drug delivery by near-infrared (NIR) radiation stimuli. In this work, a novel hydrogel based on poly(vinyl alcohol), poly(vinyl methyl ether-alt-maleic acid), poly(vinyl methyl ether), and functionalized multiwalled carbon nanotubes (MWCNT-f) was prepared by the freeze/thaw method. A comparative characterization of materials (with and without MWCNT-f) was carried out by infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, mechanical assays, swelling kinetics measurements, and photothermal analysis under NIR irradiation. Hydrophilic chemotherapeutic 5-fluorouracil (5-FU) and hydrophobic ibuprofen drugs were independently loaded into hydrogels, and the drug release profiles were obtained under passive and NIR-irradiation conditions. The concentration-dependent cytotoxicity of materials was studied in vitro using noncancerous cells and cancer cells. Notable changes in the microstructure and physicochemical properties of hydrogels were observed by adding a low content (0.2 wt %) of MWCNT-f. The cumulative release amounts of 5-FU and ibuprofen from the hydrogel containing MWCNT-f were significantly increased by 21 and 39%, respectively, through the application of short-term NIR irradiation pulses. Appropriate concentrations of the nanocomposite hydrogel loaded with 5-FU produced cytotoxicity in cancer cells without affecting noncancerous cells. The overall properties of the MWCNT-f-containing hydrogel and its photothermal behavior make it an attractive material to promote the release of hydrophilic and hydrophobic drugs, depending on the treatment requirements.

Effects of mechanical properties of carbon-based nanocomposites on scaffolds for tissue engineering applications: a comprehensive review

Mechanical properties, such as elasticity modulus, tensile strength, elongation, hardness, density, creep, toughness, brittleness, durability, stiffness, creep rupture, corrosion and wear, a low coefficient of thermal expansion, and fatigue limit, are some of the most important features of a biomaterial in tissue engineering applications. Furthermore, the scaffolds used in tissue engineering must exhibit mechanical and biological behaviour close to the target tissue. Thus, a variety of materials has been studied for enhancing the mechanical performance of composites. Carbon-based nanostructures, such as graphene oxide (GO), reduced graphene oxide (rGO), carbon nanotubes (CNTs), fibrous carbon nanostructures, and nanodiamonds (NDs), have shown great potential for this purpose. This is owing to their biocompatibility, high chemical and physical stability, ease of functionalization, and numerous surface functional groups with the capability to form covalent bonds and electrostatic interactions with other components in the composite, thus significantly enhancing their mechanical properties. Considering the outstanding capabilities of carbon nanostructures in enhancing the mechanical properties of biocomposites and increasing their applicability in tissue engineering and the lack of comprehensive studies on their biosafety and role in increasing the mechanical behaviour of scaffolds, a comprehensive review on carbon nanostructures is provided in this study.

Biomimetic Inspired Hydrogels for Regenerative Vertebral Body Stenting

PURPOSE OF REVIEW

This review aims to explore the potential of biomimetic hydrogels as an alternative to bone cement in vertebral body stenting (VBS), a minimally invasive treatment for vertebral compression fractures.

RECENT FINDINGS

The use of bone cement in VBS procedures can lead to complications such as incomplete fracture reduction and cement leakage. Biomimetic hydrogels have gained significant attention as potential biomaterial alternatives for VBS due to their unique properties, including tuneable therapeutic and mechanical properties. Over the past decade, there has been significant advancements in the development of biomimetic hydrogels for bone regeneration, employing a wide range of approaches to enhance the structural and functional properties of hydrogels. Biomimetic hydrogels hold significant promise as safer and reparative alternatives to bone cement for VBS procedures. However, further research and development in this field are necessary to explore the full potential of hydrogel-based systems for vertebral bone repair.

Advances in the Development of Nano-Engineered Mechanically Robust Hydrogels for Minimally Invasive Treatment of Bone Defects

Injectable hydrogels were discovered as attractive materials for bone tissue engineering applications given their outstanding biocompatibility, high water content, and versatile fabrication platforms into materials with different physiochemical properties. However, traditional hydrogels suffer from weak mechanical strength, limiting their use in heavy load-bearing areas. Thus, the fabrication of mechanically robust injectable hydrogels that are suitable for load-bearing environments is of great interest. Successful material design for bone tissue engineering requires an understanding of the composition and structure of the material chosen, as well as the appropriate selection of biomimetic natural or synthetic materials. This review focuses on recent advancements in materials-design considerations and approaches to prepare mechanically robust injectable hydrogels for bone tissue engineering applications. We outline the materials-design approaches through a selection of materials and fabrication methods. Finally, we discuss unmet needs and current challenges in the development of ideal materials for bone tissue regeneration and highlight emerging strategies in the field.

Advancements and Applications of Injectable Hydrogel Composites in Biomedical Research and Therapy

Injectable hydrogels have gained popularity for their controlled release, targeted delivery, and enhanced mechanical properties. They hold promise in cardiac regeneration, joint diseases, postoperative analgesia, and ocular disorder treatment. Hydrogels enriched with nano-hydroxyapatite show potential in bone regeneration, addressing challenges of bone defects, osteoporosis, and tumor-associated regeneration. In wound management and cancer therapy, they enable controlled release, accelerated wound closure, and targeted drug delivery. Injectable hydrogels also find applications in ischemic brain injury, tissue regeneration, cardiovascular diseases, and personalized cancer immunotherapy. This manuscript highlights the versatility and potential of injectable hydrogel nanocomposites in biomedical research. Moreover, it includes a perspective section that explores future prospects, emphasizes interdisciplinary collaboration, and underscores the promising future potential of injectable hydrogel nanocomposites in biomedical research and applications.

Chitosan, Gelatin, and Collagen Hydrogels for Bone Regeneration

Hydrogels are versatile biomaterials characterized by three-dimensional, cross-linked, highly hydrated polymeric networks. These polymers exhibit a great variety of biochemical and biophysical properties, which allow for the diffusion of diverse molecules, such as drugs, active ingredients, growth factors, and nanoparticles. Meanwhile, these polymers can control chemical and molecular interactions at the cellular level. The polymeric network can be molded into different structures, imitating the structural characteristics of surrounding tissues and bone defects. Interestingly, the application of hydrogels in bone tissue engineering (BTE) has been gathering significant attention due to the beneficial bone improvement results that have been achieved. Moreover, essential clinical and osteoblastic fate-controlling advances have been achieved with the use of synthetic polymers in the production of hydrogels. However, current trends look towards fabricating hydrogels from biological precursors, such as biopolymers, due to the high biocompatibility, degradability, and mechanical control that can be regulated. Therefore, this review analyzes the concept of hydrogels and the characteristics of chitosan, collagen, and gelatin as excellent candidates for fabricating BTE scaffolds. The changes and opportunities brought on by these biopolymers in bone regeneration are discussed, considering the integration, synergy, and biocompatibility features.

Proliferative and Osteogenic Supportive Effect of VEGF-Loaded Collagen-Chitosan Hydrogel System in Bone Marrow Derived Mesenchymal Stem Cells

The use of hydrogel (HG) in regenerative medicine is an emerging field and thus several approaches have been proposed recently to find an appropriate hydrogel system. In this sense, this study developed a novel HG system using collagen, chitosan, and VEGF composites for culturing mesenchymal stem cells (MSCs), and investigated their ability for osteogenic differentiation and mineral deposition. Our results showed that the HG loaded with 100 ng/mL VEGF (HG-100) significantly supported the proliferation of undifferentiated MSCs, the fibrillary filament structure (HE stain), mineralization (alizarin red S and von Kossa stain), alkaline phosphatase, and the osteogenesis of differentiated MSCs compared to other hydrogels (loaded with 25 and 50 ng/mL VEGF) and control (without hydrogel). HG-100 showed a higher VEGF releasing rate from day 3 to day 7 than other HGs, which substantially supports the proliferative and osteogenic properties of HG-100. However, the HGs did not increase the cell growth in differentiated MSCs on days 14 and 21 due to the confluence state (reach stationary phase) and cell loading ability, regardless of the VEGF content. Similarly, the HGs alone did not stimulate the osteogenesis of MSCs; however, they increased the osteogenic ability of MSCs in presence of osteogenic supplements. Accordingly, a fabricated HG with VEGF could be used as an appropriate system to culture stem cells for bone and dental regeneration.

Chitosan Hydrogels Cross-Linked with Trimesic Acid for the Delivery of 5-Fluorouracil in Cancer Therapy

Chitosan exhibits unique properties making it a suitable material for drug delivery. Considering the rising popularity of hydrogels in this field, this work offers a comprehensive study of hydrogels constituted by chitosan and cross-linked with 1,3,5-benzene tricarboxylic acid (BTC; also known as trimesic acid). Hydrogels were prepared by cross-linking chitosan with BTC in different concentrations. The nature of the gels was studied through oscillatory amplitude strain and frequency sweep tests within the linear viscoelastic region (LVE) limit. The flow curves of the gels revealed shear thinning behavior. High G′ values imply strong cross-linking with improved stability. The rheological tests revealed that the strength of the hydrogel network increased with the cross-linking degree. Hardness, cohesiveness, adhesiveness, compressibility, and elasticity of the gels were determined using a texture analyzer. The scanning electron microscopy (SEM) data of the cross-linked hydrogels showed distinctive pores with a pore size increasing according to increasing concentrations (pore size range between 3–18 µm). Computational analysis was performed by docking simulations between chitosan and BTC. Drug release studies employing 5-fluorouracil (5-FU) yielded a more sustained release profile with 35 to 50% release among the formulations studied in a 3 h period. Overall, this work demonstrated that the presence of BTC as cross-linker leads to satisfactory mechanical properties of the chitosan hydrogel, suggesting potential applications in the sustained release of cancer therapeutics.

The Use of Collagen-Based Materials in Bone Tissue Engineering

Synthetic bone substitute materials (BSMs) are becoming the general trend, replacing autologous grafting for bone tissue engineering (BTE) in orthopedic research and clinical practice. As the main component of bone matrix, collagen type I has played a critical role in the construction of ideal synthetic BSMs for decades. Significant strides have been made in the field of collagen research, including the exploration of various collagen types, structures, and sources, the optimization of preparation techniques, modification technologies, and the manufacture of various collagen-based materials. However, the poor mechanical properties, fast degradation, and lack of osteoconductive activity of collagen-based materials caused inefficient bone replacement and limited their translation into clinical reality. In the area of BTE, so far, attempts have focused on the preparation of collagen-based biomimetic BSMs, along with other inorganic materials and bioactive substances. By reviewing the approved products on the market, this manuscript updates the latest applications of collagen-based materials in bone regeneration and highlights the potential for further development in the field of BTE over the next ten years.

Recent advances on injectable nanocomposite hydrogels towards bone tissue rehabilitation

There has been significant interest in the recent past to develop injectable hydrogel scaffolds that follow minimally invasive implantation procedures towards efficient healing and regeneration of defective bone tissues. Such scaffolds offer several advantages, as they can be injected into the irregularly shaped defect and can act as a low‐density aqueous reservoir, incorporating necessary components for bone tissue repair and augmentation. Considering that bone is a biocomposite of natural biopolymer and bioapatite nanofiller, there has been a growing trend to develop nanocomposite scaffolds by combining biopolymers and inorganic nanofillers to biomimic the hierarchical nanostructure and composition of natural bone. Furthermore, the nanocomposite scaffolds can be tailored to have patient‐specific bone properties, which can lead to better biological responses. The present article begins with the introduction, followed by an overview of polymer matrices, property requirements, and crosslinking techniques employed for injectable hydrogels. Various strategies to develop injectable composites, with emphasis on nanocomposite hydrogels incorporating bioinert and bioactive nanofillers have been discussed. The fundamental challenges related to the development of injectable hydrogel nanocomposite scaffolds and the research efforts directed towards solving these problems have also been reviewed. Finally, future trends and conclusions on new generation injectable hydrogel nanocomposite bone scaffolds have been discussed in this article.

Effects of Calcium Carbonate Microcapsules and Nanohydroxyapatite on Properties of Thermosensitive Chitosan/Collagen Hydrogels

Thermosensitive chitosan/collagen hydrogels are osteoconductive and injectable materials. In this study, we aimed to improve these properties by adjusting the ratio of nanohydroxyapatite particles to calcium carbonate microcapsules in a β-glycerophosphate-crosslinked chitosan/collagen hydrogel. Two hydrogel systems with 2% and 5% nanohydroxyapatite particles were studied, each of which had varying microcapsule content (i.e., 0%, 1%, 2%, and 5%). Quercetin-incorporated calcium carbonate microcapsules were prepared. Calcium carbonate microcapsules and nanohydroxyapatite particles were then added to the hydrogel according to the composition of the studied system. The properties of the hydrogels, including cytotoxicity and biocompatibility, were investigated in mice. The calcium carbonate microcapsules were 2-6 µm in size, spherical, with rough and nanoporous surfaces, and thus exhibited a burst release of impregnated quercetin. The 5% nanohydroxyapatite system is a solid particulate gel that supports homogeneous distribution of microcapsules in the three-dimensional matrix of the hydrogels. Calcium carbonate microcapsules increased the mechanical and physical strength, viscoelasticity, and physical stability of the nanohydroxyapatite hydrogels while decreasing their porosity, swelling, and degradation rates. The calcium carbonate microcapsules-nanohydroxyapatite hydrogels were noncytotoxic and biocompatible. The properties of the hydrogel can be tailored by adjusting the ratio of calcium carbonate microcapsules to the nanohydroxyapatite particles. The 1% calcium carbonate microcapsules containing 5% nanohydroxyapatite particle-chitosan/collagen hydrogel exhibited mechanical and physical strength, permeability, and prolonged release profiles of quercetin, which were superior to those of the other studied systems and were optimal for promoting bone regeneration and delivering natural flavonoids.

Stimuli-responsive injectable chitosan-based hydrogels for controlled drug delivery systems

In the last decade, injectable hydrogels have attracted a lot of attention due to their excellent functional properties in the field of drug delivery for precise, non-invasive and focused tissue locations. Therefore, designing drug delivery systems (DDS) responsive to hydrogel stimuli to release a drug to an external stimulus with various advantages, can be very challenging. Due to their biocompatibility, mucosal adhesion, and hemostatic activity, chitosan (Chitosan)-based hydrogels offer a lot of potential for tissue engineering and drug delivery. It can be difficult to manage the structure of these stimuli-responsive CS hydrogels or they may require additional crosslinking agents, such as hydrogels with dual pH and thermo-responsiveness. Therefore, it is crucial to create these hydrogels for medicinal applications.

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration

Biomimetic materials for better bone graft substitutes are a thrust area of research among researchers and clinicians. Autografts, allografts, and synthetic grafts are often utilized to repair and regenerate bone defects. Autografts are still considered the gold-standard method/material to treat bone-related issues with satisfactory outcomes. It is important that the material used for bone tissue repair is simultaneously osteoconductive, osteoinductive, and osteogenic. To overcome this problem, researchers have tried several ways to develop different materials using chitosan-based nanocomposites of silver, copper, gold, zinc oxide, titanium oxide, carbon nanotubes, graphene oxide, and biosilica. The combination of materials helps in the expression of ideal bone formation genes of alkaline phosphatase, bone morphogenic protein, runt-related transcription factor-2, bone sialoprotein, and osteocalcin. In vitro and in vivo studies highlight the scientific findings of antibacterial activity, tissue integration, stiffness, mechanical strength, and degradation behaviour of composite materials for tissue engineering applications.

Chitosan-Based Scaffolds for Facilitated Endogenous Bone Re-Generation

Facilitated endogenous tissue engineering, as a facile and effective strategy, is emerging for use in bone tissue regeneration. However, the development of bioactive scaffolds with excellent osteo-inductivity to recruit endogenous stem cells homing and differentiation towards lesion areas remains an urgent problem. Chitosan (CS), with versatile qualities including good biocompatibility, biodegradability, and tunable physicochemical and biological properties is undergoing vigorously development in the field of bone repair. Based on this, the review focus on recent advances in chitosan-based scaffolds for facilitated endogenous bone regeneration. Initially, we introduced and compared the facilitated endogenous tissue engineering with traditional tissue engineering. Subsequently, the various CS-based bone repair scaffolds and their fabrication methods were briefly explored. Furthermore, the functional design of CS-based scaffolds in bone endogenous regeneration including biomolecular loading, inorganic nanomaterials hybridization, and physical stimulation was highlighted and discussed. Finally, the major challenges and further research directions of CS-based scaffolds were also elaborated. We hope that this review will provide valuable reference for further bone repair research in the future.