Utilisation of native, heat and acid-treated microalgae Chlamydomonas reinhardtii preparations for biosorption of Cr(VI) ions

Chromium Recovery from Chromium-Loaded Cupressus lusitanica Bark in Two-Stage Desorption Processes

Hexavalent chromium (Cr(VI)) contamination poses serious health and environmental risks. Chromium biosorption has been employed as an effective means of eradicating Cr(VI) contamination. However, research on chromium desorption from chromium-loaded biosorbents is scarce despite its importance in facilitating industrial-scale chromium biosorption. In this study, single- and two-stage chromium desorption from chromium-loaded Cupressus lusitanica bark (CLB) was conducted. Thirty eluent solutions were evaluated first; the highest single-stage chromium desorption efficiencies were achieved when eluent solutions of 0.5 M NaOH, 0.5 M H2SO4, and 0.5 M H2C2O4 were used. Subsequently, two-stage kinetic studies of chromium desorption were performed. The results revealed that using 0.5 M NaOH solution in the first stage and 0.5 M H2C2O4 in the second stage enabled the recovery of almost all the chromium initially bound to CLB (desorption efficiency = 95.9-96.1%) within long (168 h) and short (3 h) desorption periods at each stage. This study clearly demonstrated that the oxidation state of the recovered chromium depends on the chemical nature and concentration of the eluent solution. The results suggest the possible regeneration of chromium-loaded CLB for its subsequent use in other biosorption/desorption cycles.

Removal and concurrent reduction of Cr(VI) by thermoacidophilic Cyanidiales: a novel extreme biomaterial enlightened for acidic and neutral conditions

Thermoacidophilic Cyanidiales maintain a competitive edge in inhabiting extreme environments enriched with metals. Here, species of Cyanidioschyzon merolae (Cm), Cyanidium caldarium (Cc), and Galdieria partita (Gp) were exploited to remove hexavalent chromium [Cr(VI)]. Cm and Gp could remove 168.1 and 93.7 mg g^-1 of Cr(VI) at pH 2.0 and 7.0, respectively, wherein 89% and 62% of sorbed Cr on Cm and Gp occurred as trivalent chromium [Cr(III)]. Apart from surface-sorbed Cr(VI), the in vitro Cr(III) bound with polysaccharide and in vivo chromium(III) hydroxide [Cr(OH)₃] attested to the reduction capability of Cyanidiales. The distribution of Cr species varied as a function of sorbed Cr amount, yet a relatively consistent proportion of Cr(OH)₃, irrespective of Cr sorption capacity, was found only on Cm and Cc at pH 2.0. In conjunction with TXM (transmission X-ray microscopy) images that showed less impaired cell integrity and possible intracellular Cr distribution on Cm and Cc at pH 2.0, the in vivo Cr(OH)₃ might be the key to promoting the Cr sorption capacity (≥ 152 mg g^-1). Cyanidiales are promising candidates for the green and sustainable remediation of Cr(VI) due to their great removal capacity, the spontaneous reduction under oxic conditions, and in vivo accumulation.

Review on rewiring of microalgal strategies for the heavy metal remediation - A metal specific logistics and tactics

Phycoremediation of heavy metals are gaining much attention and becoming an emerging practice for the metal removal in diverse environmental matrices. Still, the physicochemical state of metal polluted sites is often found to be complex and haphazard in nature due to the irregular discharge of wastes, that leads to the lack of conjecture on the application of microalgae for the metal bioremediation. Besides, the foresaid issues might be eventually ended up with futile effect to the polluted site. Therefore, this review is mainly focusing on interpretative assessment on pre-existing microalgal strategies and their merits and demerits for selected metal removal by microalgae through various process such as natural attenuation, nutritional amendment, chemical pretreatment, metal specific modification, immobilization and amalgamation, customization of genetic elements and integrative remediation approaches. Thus, this review provides the ideal knowledge for choosing an efficient metal remediation tactics based on the state of polluted environment. Also, this in-depth description would provide the speculative knowledge of counteractive action required for pass-over the barriers and obstacles during implementation. In addition, the most common metal removal mechanism of microalgae by adsorption was comparatively investigated with different metals through the principal component analysis by grouping various factor such as pH, temperature, initial metal concentration, adsorption capacity, removal efficiency, contact time in different microalgae. Conclusively, the suitable strategies for different heavy metals removal and addressing the complications along with their solution is comprehensively deliberated for metal removal mechanism in microalgae.

Potential use of Chlorella vulgaris KCBAL01 from a freshwater stream receiving treated textile effluent in hexavalent chromium [Cr(VI)] removal in extremely acidic conditions

Remediation of hexavalent chromium with conventional chemical and physical methods is a costly process, while replacing some critical steps in physiochemical remediation with self-sustaining bioremediation agents are expected to be cost-effective and environmentally friendly implementation. In this study, a microalga isolated from a freshwater stream receiving treated textile wastewater was identified up to its molecular level and investigated its ability to tolerate and remove hexavalent chromium from extremely acidic conditions under different temperatures. The ability of microalgae to tolerate and remove Cr(VI) was investigated by growing it in BG11 media with different pH (1, 2, 3 & 7), amended with several concentrations of Cr(VI) and incubated under different temperatures for 96 hrs. Microalga was identified as Chlorella vulgaris and found that the isolated strain has a higher hexavalent chromium removal potential in extremely acidic conditions than in neutral pH conditions at 25 °C. In contrast, its Cr(VI) removal potential is significantly influenced by the pH and temperature of the growth medium. Furthermore, it exhibited a permanent viability loss at extreme acidic conditions (pH 1 - 3) and prolonged exposure to the higher chromium content. The microalga investigated will be a highly useful bioagent in hexavalent chromium remediation in high acidic conditions.

Engineered macroalgal and microalgal adsorbents: Synthesis routes and adsorptive performance on hazardous water contaminants

Colourants, micropollutants and heavy metals are regarded as the most notorious hazardous contaminants found in rivers, oceans and sewage treatment plants, with detrimental impacts on human health and environment. In recent development, algal biomass showed great potential for the synthesis of engineered algal adsorbents suitable for the adsorptive management of various pollutants. This review presents comprehensive investigations on the engineered synthesis routes focusing mainly on mechanical, thermochemical and activation processes to produce algal adsorbents. The adsorptive performances of engineered algal adsorbents are assessed in accordance with different categories of hazardous pollutants as well as in terms of their experimental and modelled adsorption capacities. Due to the unique physicochemical properties of macroalgae and microalgae in their adsorbent forms, the adsorption of hazardous pollutants was found to be highly effective, which involved different mechanisms such as physisorption, chemisorption, ion-exchange, complexation and others depending on the types of pollutants. Overall, both macroalgae and microalgae not only can be tailored into different forms of adsorbents based on the applications, their adsorption capacities are also far more superior compared to the conventional adsorbents.

Clean approach for chromium removal in aqueous environments and role of nanomaterials in bioremediation: Present research and future perspective

Chromium is an insidious ecological pollutant that is of huge value for its toxicity. The existing ecological objective to lower the heights of toxic materials in marine systems and to stimulate the existing water to recycle after suitable treatment of wastewater. Chromium is a hazard element that appears in discharges of numerous industries that must be diminished to accomplish the goals. Nearly all of the findings described in the literature related to the usage of various materials such as fungal, algal, bacterial biomass, and nanomaterials for chromium adsorption. The current work evaluates the findings of research commenced in the preceding on the use of a variety of adsorbents to decrease chromium concentrations in contaminated waters. This review article focuses on the issue of chromium contamination, its chemistry, causes, consequences, biological agent remediation techniques, and the detailed process of chromium detoxification in microbial cells. It also lists a description of the in situ and ex situ chromium bioremediation methods used. This can help design more effective Cr(VI) removal methods, thus bridging the difference between laboratory discoveries and industrial chromium remediation applications.

Optimization of chromium(VI) removal by indigenous microalga (Chlamydomonas sp.)-based biosorbent using response surface methodology

Phycoremediation of heavy metals has garnered considerable recent research interest. In this study, an indigenous microalga (Chlamydomonas sp.)-based biosorbent was employed for biosorption of Cr(VI) dissolved solids (Cr(VI)-DS), optimized using response surface methodology (RSM). The effects of microalga concentration, pH, and contact time were studied with 250 mg Cr(VI)-DS L^-1 . The biosorption of Cr(VI)-DS was higher at acidic pH (94.17% at pH 4) than at alkaline conditions (68.53% at pH 10). The interaction of pH and microalga concentration exerted significant (p < 0.05) influence on the biosorption. Under the optimized parameters of 1.5 g microalga L^-1 , pH 4, and contact time of 30 min, a predicted biosorption of 91.31% and biosorption capacity of 152 mg Cr(VI)-DS g^-1 biomass were documented. FTIR analysis attested the electronegative surface functional groups of the microalgae biomass, bracketed together with its high biosorption potency. The study evinced the potential of the indigenous microalga for remediation of hexavalent chromium. PRACTITIONER POINTS: Indigenous Ethiopian microalga (Chlamydomonas sp.) exhibited 94% Cr(VI) abatement with biosorption capacity of 152 mg Cr(VI) g^-1 . FTIR analysis of the biosorbent divulged the presence of electronegative functional groups (amino, carboxyl, hydroxyl, and carbonyl groups). Higher biosorption of Cr(VI)-DS under acidic pH (94.17% at pH 4) than alkaline pH (68.53% at pH 10). Significant (p < 0.05) interaction effect of pH and biomass concentration on the biosorption, evinced in RSM optimization 91% Cr(VI) removal achieved under optimal conditions of 1.5 g biosorbent L^-1 , 30 min of contact time, and pH 4.

Carboxylated cellulose nanofiber/montmorillonite nanocomposite for the removal of levofloxacin hydrochloride antibiotic from aqueous solutions

Herein, we report the facile two-step synthesis of an effective carboxylated cellulose nanofiber/montmorillonite nanocomposite (CMNFs-MMT) adsorbent for levofloxacin hydrochloride (Levo-HCl). CMNFs-MMT was characterized using scanning electron microscopy, energy dispersive X-ray spectrometry, Brunauer-Emmett-Teller measurements, X-ray photoelectron spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. Based on the central composite design, the effects of various factors on the removal of Levo-HCl by the CMNFs-MMT were explored, wherein the effect of pH was the most significant. To gain a clearer perspective on the adsorption process of Levo-HCl onto CMNFs-MMT, the adsorption kinetics and isotherms were also measured, revealing that the reaction is pseudo-second-order and the Sips models provide the best fit with experimental data. Comparing the adsorption in pure water with the removal in river water, the rate of river water removal (90.37%) was slightly lower than that of pure water (93.97%) when adsorption equilibrium was reached, confirming that CMNFs-MMT is not easily influenced by environmental conditions. Reusability experiments indicate that CMNFs-MMT can maintain a certain adsorption capacity for Levo-HCl after six uses. Overall, this work indicates that CMNFs-MMT is an effective adsorbent for eliminating Levo-HCl from aqueous media in future engineering applications.

Microalgal Metallothioneins and Phytochelatins and Their Potential Use in Bioremediation

The persistence of heavy metals (HMs) in the environment causes adverse effects to all living organisms; HMs accumulate along the food chain affecting different levels of biological organizations, from cells to tissues. HMs enter cells through transporter proteins and can bind to enzymes and nucleic acids interfering with their functioning. Strategies used by microalgae to minimize HM toxicity include the biosynthesis of metal-binding peptides that chelate metal cations inhibiting their activity. Metal-binding peptides include genetically encoded metallothioneins (MTs) and enzymatically produced phytochelatins (PCs). A number of techniques, including genetic engineering, focus on increasing the biosynthesis of MTs and PCs in microalgae. The present review reports the current knowledge on microalgal MTs and PCs and describes the state of art of their use for HM bioremediation and other putative biotechnological applications, also emphasizing on techniques aimed at increasing the cellular concentrations of MTs and PCs. In spite of the broad metabolic and chemical diversity of microalgae that are currently receiving increasing attention by biotechnological research, knowledge on MTs and PCs from these organisms is still limited to date.

A comparative investigation of lithium(I) biosorption properties of Aspergillus versicolor and Kluyveromyces marxianus

In the current batch study, lithium(I) ion sorption behaviors of Aspergillus versicolor fungus and newly isolated Kluyveromyces marxianus yeast were investigated comparatively. Surface and structural characterization studies of the biosorbents carried out with Fourier transform infrared spectrometer (FTIR), scanning electron microscope (SEM), surface area and zeta potential analyses showed that isolated K. marxianus yeast from salty wastes has more preferable properties (i.e. higher porosity, surface area and negativity) for cation sorption. Biosorption studies also supported this estimation; higher lithium(I) sorption capacities were obtained with K. marxianus cells at all experimental conditions studied. Rapid sorption profiles of the sorbents demonstrated that physical interaction is the main mechanism in this system. The effects of pH and initial lithium(I) concentration on the lithium(I) sorption capacities of biosorbents were examined. The maximum adsorption capacities of 347.9 and 409.2 μmol lithium(I)/g biosorbent were obtained at an initial lithium(I) concentration of 20 mg/L at pH 9.0 using A. versicolor and K. marxianus, respectively. The equilibrium data fitted both Langmuir and Freundlich models in the concentration ranges studied. This study revealed that K. marxianus yeast can be used for effective, rapid and low cost capture process of lithium(I) ions from aqueous solutions.

Ecuadorian yeast species as microbial particles for Cr(VI) biosorption

Pollution caused by heavy metals is a prime concern due to its impact on human health, animals, and ecosystems. Cr(VI), generated in a range of different industries as a liquid effluent, is one of the most frequent contaminants. In the work presented herein, the adsorption efficiency of three species of native yeasts from Ecuador (Kazachstania yasuniensis, Kodamaea transpacifica, and Saturnispora quitensis) for Cr(VI) removal from simulated wastewater was assessed, taking Saccharomyces cerevisiae as a reference. After disruption of the flocs of yeast with a cationic surfactant, adsorption capacity, kinetics, and biosorption isotherms were studied. K. transpacifica isolate was found to feature the highest efficiency among the four yeasts tested, as a result of its advantageous combination of surface charge, individual cell size (4.04 μm), and surface area (1588.27 m²/L). The performance of S. quitensis was only slightly lower. The remarkable biosorption capacities of these two isolates (476.19 and 416.67 mg of Cr(VI)/g of yeast, respectively) evidence the potential of non-conventional yeast species as sorption microbial particles for polluted water remediation.

Arsenic biosorption using pretreated biomass of psychrotolerant Yersinia sp. strain SOM-12D3 isolated from Svalbard, Arctic

A Gram-negative, arsenite-resistant psychrotolerant bacterial strain, Yersinia sp. strain SOM-12D3, was isolated from a biofilm sample collected from a lake at Svalbard in the Arctic area. To our knowledge, this is the first study on the ability of acid-treated and untreated, non-living biomass of strain SOM-12D3 to absorb arsenic. We conducted batch experiments at pH 7, with an initial As(III) concentration of 6.5 ppm, at 30 °C with 80 min of contact time. The Langmuir isotherm model fitted the equilibrium data better than Freundlich, and the sorption kinetics of As(III) biosorption followed the pseudo-second-order rate equation well for both types of non-living biomass. The highest biosorption capacity of the acid-treated biomass obtained by the Langmuir model was 159 mg/g. Further, a high recovery efficiency of 96% for As(III) was achieved using 0.1 M HCl within four cycles, which indicated high adsorption/desorption. Fourier transformed infrared (FTIR) demonstrated the involvement of hydroxyl, amide, and amine groups in As(III) biosorption. Field emission scanning electron microscopy-energy dispersive analysis (FESEM-EDAX) indicated the different morphological changes occurring in the cell after acid treatment and arsenic biosorption. Our results highlight the potential of using acid-treated non-living biomass of the psychrotolerant bacterium, Yersinia sp. Strain SOM-12D3 as a new biosorbent to remove As(III) from contaminated waters.

Recent advances on biosorption by aerobic granular sludge

Aerobic granular sludge is a form of microbial auto-aggregation, and a promising biotechnology for wastewater treatment. This review aims at providing the first comprehensive, systematic, and in-depth overview on the application of aerobic granules as biosorbents. The target pollutants encompass heavy metals (both cationic and oxyanionic), nuclides, dyes, and inorganic non-metal substances. Different granule types are discussed, i.e. intact and fragmented, compact and fluffy, original and modified, and the effects of granule surface modification are introduced. A detailed comparison is conducted on the characteristics of granular biomass, the conditions of the adsorption tests, and the resultant performance towards various sorbates. Analytical and mathematical tools typically employed are presented, and possible interactions between the pollutants and granules are theorized, leading to an analysis on the mechanisms of the adsorption processes. Original granules appear highly effective towards cationic metals, while surface modification by organic and inorganic agents can expand their applicability to other pollutants. Combined with their advantages of high mechanical strength, density, and settling speed, aerobic granules possess exceptional potential in real wastewater treatment as biosorbents. Possible future research, both fundamental and practical, is suggested to gain more insights into the mechanism of their function, and to advance their industrial application.

Metal Removal from Acid Waters by an Endemic Microalga from the Atacama Desert for Water Recovery

The environmental problems generated by waste from the mining industry in the mineral extraction for business purposes are known worldwide. The aim of this work is to evaluate the microalga Muriellopsis sp. as a potential remover of metallic ions such as copper (Cu2+), zinc (Zn2+) and iron (Fe2+), pollutants of acid mine drainage (AMD) type waters. For this, the removal of these ions was verified in artificial acid waters with high concentrations of the ions under examination. Furthermore, the removal was evaluated in waters obtained from areas contaminated by mining waste. The results showed that Muriellopsis sp. removed metals in waters with high concentrations after 4–12 h and showed tolerance to pH between 3 and 5. These results allow proposing this species as a potential bioremediator for areas contaminated by mining activity. In this work, some potential alternatives for application in damaged areas are proposed as a decontamination plan and future prevention.

FTIR spectroscopy and scanning electron microscopic analysis of pretreated biosorbent to observe the effect on Cr (VI) remediation

Various chemical and physical treatments have been applied to indigenously isolated cyanobacterial strain, Lyngbya putealis HH-15, to observe the effect on chromium removal capacity. Pretreatment with hydrochloric acid (99.1%) and nitric acid (98.5%) resulted in enhanced chromium removal as compared to untreated control biosorbent (98.1%). Pretreatment with acetic acid (97.9%), methanol (97.0%), calcium chloride (96.0%), hot water (95.2%), and sodium hydroxide (93.9%) did not improve the chromium removal capacity of biosorbent. Fourier transform infrared spectrometry (FTIR) and scanning electron microscopy (SEM) analysis identified changes in biomass functionality and availability after physical and chemical modification-the results of which were in agreement with metal removal studies. In conclusion, this acid-treated biosorbent represents a suitable candidate to replace conventional removal technologies for metal-bearing wastewaters.

Potential use of algae for heavy metal bioremediation, a critical review

Algae have several industrial applications that can lower the cost of biofuel co-production. Among these co-production applications, environmental and wastewater bioremediation are increasingly important. Heavy metal pollution and its implications for public health and the environment have led to increased interest in developing environmental biotechnology approaches. We review the potential for algal biosorption and/or neutralization of the toxic effects of heavy metal ions, primarily focusing on their cellular structure, pretreatment, modification, as well as potential application of genetic engineering in biosorption performance. We evaluate pretreatment, immobilization, and factors affecting biosorption capacity, such as initial metal ion concentration, biomass concentration, initial pH, time, temperature, and interference of multi metal ions and introduce molecular tools to develop engineered algal strains with higher biosorption capacity and selectivity. We conclude that consideration of these parameters can lead to the development of low-cost micro and macroalgae cultivation with high bioremediation potential.

Arsenic and other heavy metal accumulation in plants and algae growing naturally in contaminated area of West Bengal, India

The present study was conducted to quantify the arsenic (As) and other heavy metal concentrations in the plants and algae growing naturally in As contaminated blocks of North-24-Pargana and Nandia district, West Bengal, India to assess their bioaccumulation potential. The plant species included five macrophytes and five algae were collected from the nine selected sites for estimation of As and other heavy metals accumulated therein by using Inductively Coupled Plasma Mass Spectrophotometer (ICP-MS). Results revealed that maximum As concentration (117mgkg(-1)) was recorded in the agricultural soil at the Barasat followed by Beliaghat (111mgkg(-1)) sites of North-24-Pargana. Similarly, concentration of selenium (Si, 249mgkg(-1)), lead (Pb, 79.4mgkg(-1)), chromium (Cr, 138mgkg(-1)) was also found maximum in the soil at Barasat and cadmium (Cd, 163mgkg(-1)) nickel (Ni, 36.5mgkg(-1)) at Vijaynagar site. Among the macrophytes, Eichhornia crassipes found more dominating species in As contaminated area and accumulate As (597mgkg(-1)) in the shoot at kanchrapara site. The Lemna minor found to accumulate maximum As (735mgkg(-1)) in the leaves at Sonadanga and Pistia stratiotes accumulated minimum As (24.5mgkg(-1)) in the fronds from Ranaghat site. In case of diatoms, maximum As (760mgkg(-1)) was accumulated at Kanchrapara site followed by Hydrodictiyon reticulatum (403mgkg(-1)) at the Ranaghat site. High concentration of As and other heavy metal in soil indicates long term effects of irrigation with contaminated ground water, however, high concentration of heavy metals in naturally growing plants and algae revealed their mobilization through leaching and possible food chain contamination. Therefore, efficient heavy metal accumulator macrophytes Eichhornia crassipes, Lemna minor, Spirodela polyrhiza may be exploited in removing metals from contaminated water by developing a plant based treatment system. However, As accumulator algal species may be used as a bioresource for understanding algae mediated As detoxification and bioindication studies.

Assessment of native plant species for phytoremediation of heavy metals growing in the vicinity of NTPC sites, Kahalgaon, India

The present investigation was carried out to screen native plants growing in fly ash (FA) contaminated areas near National Thermal Power Corporation (NTPC), Kahalgaon, Bihar, India with a view to using them for the eco-restoration of the area. A total number of 30 plant species (5 aquatic and 25 terrestrial including 6 ferns) were collected and their diversity status and dominance were also studied. After screening of dominant species at highly polluted site, 8 terrestrial and 5 aquatic plants were analyzed for heavy metals (Fe, Zn, Cu, Ni, Si, Al, Pb, Cr, and Cd). Differential accumulations of various heavy metals by different species of plants were observed. Typha latifolia was found to be most efficient metal accumulator of Fe (927), Cu (58), Zn (87), Ni (57), Al (67), Cd (95), and Pb (69), and Azolla pinnata as Cr (93) hyper-accumulator among aquatic species in µg g(-1). In terrestrial species the maximum levels of Fe (998), Zn (81), Ni (93), Al (121), and Si (156) were found in Croton bonplandium. However, there was high spatial variability in total metal accumulation in different species indicated by coefficient of variation (CV%). These results suggest that various aquatic, some dominant terrestrial plants including fern species may be used in a synergistic way to remediate and restore the FA contaminated wastelands.

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics, Equilibrium and Thermodynamic Studies

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g(-1). Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater.

Microalgae - A promising tool for heavy metal remediation

Biotechnology of microalgae has gained popularity due to the growing need for novel environmental technologies and the development of innovative mass-production. Inexpensive growth requirements (solar light and CO2), and, the advantage of being utilized simultaneously for multiple technologies (e.g. carbon mitigation, biofuel production, and bioremediation) make microalgae suitable candidates for several ecofriendly technologies. Microalgae have developed an extensive spectrum of mechanisms (extracellular and intracellular) to cope with heavy metal toxicity. Their wide-spread occurrence along with their ability to grow and concentrate heavy metals, ascertains their suitability in practical applications of waste-water bioremediation. Heavy metal uptake by microalgae is affirmed to be superior to the prevalent physicochemical processes employed in the removal of toxic heavy metals. In order to evaluate their potential and to fill in the loopholes, it is essential to carry out a critical assessment of the existing microalgal technologies, and realize the need for development of commercially viable technologies involving strategic multidisciplinary approaches. This review summarizes several areas of heavy metal remediation from a microalgal perspective and provides an overview of various practical avenues of this technology. It particularly details heavy metals and microalgae which have been extensively studied, and provides a schematic representation of the mechanisms of heavy metal remediation in microalgae.

Use of core-shell polyaniline/polystyrene nanocomposite for removal of Cr (VI)

In this study the ability of polyaniline/polystyrene as high performance synthetic adsorbent for the adsorptive removal of Cr (VI) ions from aqueous solutions was investigated. To carry out the investigation, the batch operation method was employed. As well, the effects of various experimental parameters like pH, adsorbent dosage, contact time and the temperature on the removal efficiency were studied. The optimum conditions for Cr (VI) removal are achieved with pH 4, adsorbent dosage of 15 g L−1, and 30 min equilibrium time. It is worth noting that the adsorption of Cr (VI) followed pseudo-second-order kinetics. The equilibrium adsorption isotherm was better described by Temkin adsorption isotherm model. The adsorption capacity ( qmax) of PAn/Ps for Cr (VI) ions in terms of monolayer adsorption was 19 mg g−1. The change of entropy (▵S0) and enthalpy (▵H0) were estimated to be −0.08455 J (mol K)−1 and −29.04 kJ mol−1, respectively. The negative value of Gibbs free energy (▵ G0) indicates feasible and spontaneous adsorption of Cr (VI) on PAn/Ps.

Use of core-shell polyaniline/polystyrene nanocomposite for removal of Cr (VI)

In this study the ability of polyaniline/polystyrene as high performance synthetic adsorbent for the adsorptive removal of Cr (VI) ions from aqueous solutions was investigated. To carry out the investigation, the batch operation method was employed. As well, the effects of various experimental parameters like pH, adsorbent dosage, contact time and the temperature on the removal efficiency were studied. The optimum conditions for Cr (VI) removal are achieved with pH 4, adsorbent dosage of 15 g L−1, and 30 min equilibrium time. It is worth noting that the adsorption of Cr (VI) followed pseudo-second-order kinetics. The equilibrium adsorption isotherm was better described by Temkin adsorption isotherm model. The adsorption capacity ( qmax) of PAn/Ps for Cr (VI) ions in terms of monolayer adsorption was 19 mg g−1. The change of entropy (▵S0) and enthalpy (▵H0) were estimated to be −0.08455 J (mol K)−1 and −29.04 kJ mol−1, respectively. The negative value of Gibbs free energy (▵ G0) indicates feasible and spontaneous adsorption of Cr (VI) on PAn/Ps.

Removal of Cd(II) from aquatic system using Oscillatoria sp. biosorbent

Biosorption of Cd(II) ions from aqueous solutions by native and dried Oscillatoria sp. Cyanobacterium biomass was investigated in the batch mode. The Oscillatoria sp. was prepared from Molecular and Cell Laboratory of University of Mazandaran and grown in BG-11 medium. A comparison of Cd(II) adsorption properties of dried with native Oscillatoria sp. biomass was made, the dried one showed a higher biosorption capacity and faster kinetic. The influence of solution pH, contact time, biomass concentration, initial metal ion concentration, and presence of coions using dried Oscillatoria sp. biomass as well as pretreatment on the biosorption capacity of the biomass were studied. Various pretreatments of Oscillatoria sp. increased biosorption of Cd(II) at pH 7 in comparison with native biomass. However, heating at 100°C in a water bath showed significant improvement in Cd(II) biosorption capacity. The experimental biosorption data was well fitted to the Freundlich model compared to the Langmuir model, and the amount of Cd(II) removed from solution increased with increasing Cd(II) concentration. In addition, the dried biomass was investigated for Cd(II) removal from the simulated real sample containing about 14 mg/l Cd(II) at pH 7, under the same experimental condition.

Biosorption of Cr(VI) by free and immobilized Pediastrum boryanum biomass: equilibrium, kinetic, and thermodynamic studies

BACKGROUND AND PURPOSE

The biosorption of Cr(VI) from aqueous solution has been studied using free and immobilized Pediastrum boryanum cells in a batch system. The algal cells were immobilized in alginate and alginate-gelatin beads via entrapment, and their algal cell free counterparts were used as control systems during biosorption studies of Cr(VI).

METHODS

The changes in the functional groups of the biosorbents formulations were confirmed by Fourier transform infrared spectra. The effect of pH, equilibrium time, initial concentration of metal ions, and temperature on the biosorption of Cr(VI) ion was investigated.

RESULTS

The maximum Cr(VI) biosorption capacities were found to be 17.3, 6.73, 14.0, 23.8, and 29.6 mg/g for the free algal cells, and alginate, alginate-gelatin, alginate-cells, and alginate-gelatin-cells at pH 2.0, which are corresponding to an initial Cr(VI) concentration of 400 mg/L. The biosorption of Cr(VI) on all the tested biosorbents (P. boryanum cells, alginate, alginate-gelatin, and alginate-cells, alginate-gelatin-cells) followed Langmuir adsorption isotherm model.

CONCLUSION

The thermodynamic studies indicated that the biosorption process was spontaneous and endothermic in nature under studied conditions. For all the tested biosorbents, biosorption kinetic was best described by the pseudo-second-order model.