LCA data quality: sensitivity and uncertainty analysis

Environmental impact scenarios of organic fraction municipal solid waste treatment with Black Soldier Fly larvae based on a life cycle assessment

Biowaste treatment with Black Soldier Fly (BSF) larvae is an alternative option for organic waste valorization. Its environmental impacts should be assessed and compared with conventional treatment options. The research aims to evaluate the treatment of organic fraction of municipal solid waste (OFMSW) with BSF larvae through a life cycle assessment (LCA). This study employed data inventories from literature and aimed to provide a wide range of production parameter values to identify the potentialities of BSF treatment in the best-case and worst-case scenarios. The SimaPro9, the database Ecoinvent3.5, and the impact assessment method IMPACT 2002+ have been employed for the analysis. A sensitivity analysis of relevant parameters was conducted, considering the avoided impacts that can be obtained thanks to the exploitation of larvae proteins for bioplastics or fishmeal production. Research findings highlight six main environmental impact indicators: respiratory inorganics (kg PM2.5-eq), ozone layer depletion (kg CFC-11-eq), terrestrial ecotoxicity (kg TEG soil), land occupation (m2 organic arable), global warming (kg CO2-eq), and non-renewable energy (MJ primary). The most relevant process generating impacts is BSF breeding, followed by boiling, storage, and OFMSW treatment. The environmental performance is better when the conventional fishmeal substituted, thanks to BSF larvae production, is made from areas 10,000 km far, implementing a 100% renewable energy scenario, reducing the energy consumption by 50%, increasing the lifespan of the equipment to 15 years, and products are employed locally. The current study represents the first attempt to evaluate the global higher or lower environmental impact scenario related to OFMSW treatment through BSF larvae.

Life cycle assessment of nutrient recovery strategies from domestic wastewaters to quantify environmental performance and identification of trade-offs

Increase in anthropogenic activities proliferated the consumption of resources such as phosphorus; and increase the adverse environmental impacts especially eutrophication on water resources such as lakes. Nutrient recovery from domestic wastewaters to produce a fertiliser has been explored to address these challenges in the context of a sustainable circular nutrient economy. Life cycle assessment (LCA) was performed to holistically assess the impacts of integrating a nutrient recovery system on wastewater and water resource management using Laguna de Bay, Philippines as the geographical boundary. The inventory was developed based on the results of the emerging nutrient recovery reactor operations and the application of the recovered fertiliser on the agricultural crops. The LCA results for the proposed scenario showed environmental benefits of about 83.6% freshwater eutrophication, 102.5% terrestrial ecotoxicity, 26.9% water consumption, 100.7% mineral resource scarcity, while the global warming potential is 95.4% higher than the baseline scenario. Results imply policy review for septage management, system optimisation, and evaluation of alternative methods of wastewater management, in terms of life cycle thinking and sustainability across the globe.

Life cycle assessment of biostimulant production from algal biomass grown on piggery wastewater

Piggery wastewater has become a large source of pollution with high concentrations of nutrients, that must be managed and properly treated to increase its environmental viability. Currently, the use of microalgae for treating this type of wastewater has emerged as a sustainable process with several benefits, including nutrient recovery to produce valuable products such as biostimulants, and CO2 capture from flue gases. However, the biostimulant production from biomass grown on piggery wastewater also has environmental impacts that need to be studied to identify possible hotspots. This work presents the life cycle assessment by IMPACT 2002+ method of the production of microalgae-based biostimulants, comparing two different harvesting technologies (membrane in scenario 1 and centrifuge in scenario 2) and two different technologies for on-site CO2 capture from flue gases (chemical absorption and membrane separation). The use of membranes for harvesting (scenario 1) reduced the environmental impact in all categories (human health, ecosystem quality, climate change, and resources) by 30 % on average, compared to centrifuge (scenario 2). Also, membranes for CO2 capture allowed to decrease environmental impacts by 16 %, with the largest reduction in the resource category (∼33 %). Thus, the process with the best environmental viability was achieved in scenario 1 using membranes for CO2 capture, with a value of 217 kg CO2 eq/FU. In scenario 2 with centrifugation, the high contribution of the cultivation sub-unit in all impacts was highlighted (>75 %), while in scenario 1 the production sub-unit also had moderate contribution in the human health (∼35 %) and climate change (∼30 %) categories due to the lower concentration and high flow rates. These results were obtained under a worst-case situation with pilot scale optimized parameters, with limited data which would have to be further optimized at industrial-scale implementation. The sensitivity analysis showed a little influence of the parameters that contribute the most to the impacts, except for the transportation of the piggery wastewater to the processing plant in scenario 2. Because of the relevant impact of biostimulant transportation in scenario 1, centrifugation becomes more favourable when transportation distance is longer than 321 km.

Catchment-scale life cycle impacts of green infrastructures and sensitivity to runoff coefficient with stormwater modelling

Urban green infrastructure (GI) has been widely used in sponge city construction to manage hydrological processes. While studies on environmental benefits of GI from the perspective of whole life cycle assessment (LCA) have been reported in recent years, few have explored and compared the environmental performance of different GIs within a single catchment, which is directly linked to catchment-scale hydrological control. This study focuses on a Sponge City pilot project in Shenzhen, China, including three typical types of GI: permeable pavement, green roof, and sunken green space. By collecting hydrological data, land use, and life cycle inventory of GI and employing SWMM (Storm Water Management Model)-based stormwater modelling, we have revealed the environmental impacts at different stages of the life cycle of the GI scenario and three GIs through comparative and sensitivity analyses. Notably, we have disclosed, for the first time, the effect of the runoff coefficient in LCA. Our findings indicate that over the 30-year life cycle, the total environmental impact of the GI scenario is 24 % smaller than that of the hypothetical grey scenario. Permeable pavement exhibits the largest environmental impact per unit area, being 1.8 times and 7.6 times greater than that of the green roof and sunken green space, respectively. The operation stage of the three GIs significantly mitigates eutrophication and climate change. Furthermore, sensitivity analysis demonstrates that an increase in surface runoff undermines the environmental benefits of GIs. These results highlight the importance of embedding stormwater modelling into LCA, enabling catchment-scale integrated evaluation and equivalent assessment of different GIs within a single catchment whereby the influence of external factors such as climate change can be described, which aids in understanding the dynamic environmental performance of GIs. The proposed research framework and results are anticipated to provide valuable guidance for future GI construction and carbon-neutral policies.

From full life cycle assessment to simplified life cycle assessment: A generic methodology applied to sludge treatment

Life cycle assessment is widely used to evaluate sludge treatment methods. However, detailed life cycle assessment is time-consuming and resource-intensive. In addition, the complex characteristics of sludge and the variety of treatment methods increase the difficulty of sludge treatment life cycle assessment. There is an urgent need to develop simplified life cycle assessment models to allow rapid decision-making. This study proposes a simplified method of sludge treatment life cycle assessment based on logistic regression analysis. The simplified model relies on the total environmental impact and very few or even a single input parameters. Contribution and data quality analysis were introduced to identify key input parameters and to obtain model training data. The method was eventually applied to traditional sludge treatment methods, showing that it can quickly and accurately predict environmental impact. Representative analysis showed that the model would be affected by technology and energy structure modification. It is hoped that this study will provide a reference and new perspectives for a simplified life cycle assessment of sludge treatment.

Extensive comparison of methods for removal of organic halogen compounds from pharmaceutical process wastewaters with life cycle, PESTLE, and multi-criteria decision analyses

Recycling and disposing wastewater from the pharmaceutical industry are of utmost importance in mitigating chemical waste generation, where unmanaged hazardous waste fluxes could cause massive environmental damage. Air stripping, steam stripping, distillation, and incineration offer significant emission reduction potentials for pharmaceutical applications; however, selecting specific process units is a complicated task due to the high number of influencing screening criteria. The mentioned chemical processes are modelled with the Aspen Plus program. This study examines the environmental impacts of adsorbable organic halogens (AOX) containing pharmaceutical process wastewater disposal by conducting life cycle impact assessments using the Product Environmental Footprint (PEF), IMPACT World + Endpoint V1.01, and Recipe 2016 Endpoint (H) V1.06 methods. The results show that the distillation-based separation of AOX compounds is characterized by the most favourable climate change impact and outranks the PEF single score of air stripping, steam stripping, and incineration by 6.3%, 29.1%, 52.0%, respectively. The energy-intensive distillation technology is further evaluated by considering a wide selection of energy sources (i.e., fossil fuel, nuclear, solar, wind onshore, and wind offshore) using PESTLE (Political, Economic, Social, Technological, Legal, Environmental) analysis combined with multi-criteria decision support to determine the most beneficial AOX disposal scenario. The best overall AOX regeneration performance and lowest climate change impact (7.25 × 10-3 kg CO2-eq (1 kg purified wastewater)-1) are obtained by supplying variable renewable electricity from onshore wind turbines, reaching 64.87% carbon emission reduction compared to the baseline fossil fuel-based process alternative.

Single-use plastic bag alternatives result in higher environmental impacts: Multi-regional analysis in country with uneven waste management

Single-use plastics (SUPs) have been the focus of plastic pollution control, and limiting their use while shifting to other alternatives have been widely promoted in various countries. This study tries to verify the life cycle environmental performances of single-use plastic bag and its alternatives under different scenarios in real world. China is chosen as case study, where provincial variability is prominent in waste disposal, and strictest plastics ban has issued lately in this worldwide biggest market. The study found that HDPE plastic bags have relatively lowest environmental footprints regarding to Acidification Potential, Global Warming Potential, Chemical Oxygen Demand, Eutrophication Potential, Fossil Fuel Depletion Potential and Water Use. Sticking to current waste treatment, large-scale promotion of degradable products will increase environmental impacts by 1.4-22.6 times nationwide. Xinjiang has highest impact of using plastic bag at household level, due to its long-distance transport and high landfill ratio. Henan and Hebei will trigger the most significant changes in Global Warming Potential of 4.6 and 4.4 times if single-use plastic bags are all replaced with other alternatives. Uncertainty and sensitivity test further prove the robustness of results, and extends geographical implications of the findings. These suggest that introduction of new alternatives requires systematic deployment with full life cycle thinking, and SUPs pollution control should be a holistic transformation. Reducing bag weight while ensuring carrying capacity, purchasing local products to shorten transportation distances and shifting towards cleaner energy sources are synergetic ways to reduce the environmental impact of single-use plastic products.

Assessing the environmental impacts of organic and conventional mixed vegetable production based on the life cycle assessment approach

This study aims to assess the environmental impacts and the energy efficiency of organic and conventional vegetable production in Palas Basin, Kayseri, Turkey. Three organic and three conventional farmers representing the vegetable production in the region participated in face-to-face questionnaires. Life cycle assessment (LCA) was implemented to assess the global warming potential (GWP), eutrophication potential (EP), acidification potential (AP), and energy use, which were selected as environmental impact potentials. Additionally, the environmental risk assessment was conducted to understand the impact of pesticide use in the region. Six farmers were investigated individually, and it was found that all of the farmers had a common cultivation calendar, but there were differences in the application. Particularly, mineral fertilizer use and irrigation were excessive in some agricultural practices. Although the use of N- and P-based mineral fertilizers was one of the main differences between organic and conventional farming, irrigation was a common practice. Irrigation, the most influential practice, elevated not only water consumption but also EP, AP, and GWP as a result of electricity consumption by electrical pumps. Electricity consumption from irrigation contributed to the GWP most, and this value was in the range of 45%-95%. Mineral fertilizer use covered up to 40% of the EP, 31% of the GWP, and 37% of the AP for conventional farmers. Three different scenarios were developed to reduce the environmental impacts of the use of excessive mineral fertilizer and irrigation. The developed scenarios recommended the reductions by 38%, 44%, 25%, and 60% in GWP, EP, AP, and total energy inputs, respectively. This study demonstrates that LCA is beneficial in determining the environmental impact of hotspots in vegetable production and allows the development of different solutions to mitigate environmental impacts for agricultural sustainability. Integr Environ Assess Manag 2022;18:1733-1746. © 2022 SETAC.

Environmental assessment of recycling waste corrugated cartons from online shopping of Chinese university students

College students in China are among the main consumers of online shopping and the corrugated cartons used to ship items are piling up on campus. However, the generation characteristics of waste corrugated cartons (WCCs) in universities and the environmental consequences along their recycling pathway remain to be addressed. Taking Nanjing University (NJU) as an example, this study conducted a questionnaire survey on campus to analyze the generation characteristics of WCCs and evaluated the life cycle environmental impacts of their recycling process using the Life Cycle Assessment (LCA) method. The results showed that WCC generation on campus varied by educational level, sex, grade and major, with doctoral students and female students being more active in online shopping and thus generating more WCCs. It was further estimated that a total of 0.27 Mt of WCCs were generated by college students in China in 2020, of which recycling would result in 0.31 Mt of CO₂ eq of GHG emissions. Pulping and papermaking processes are the main contributors to the life cycle environmental impacts of WCC recycling, together accounting for at least 77% of the total. This study suggests the need for joint efforts from universities, students, and recycling enterprises to reduce WCC generation in Chinese universities and to make its recycling chain more environmentally sustainable.

Continuous Systems Bioremediation of Wastewaters Loaded with Heavy Metals Using Microorganisms

Heavy metal pollution is a serious concern of the modern era due to its widespread negative effects on human health and to the environment. Conventional technologies applied for the uptake of this category of persistent pollutants are complex, often expensive, and inefficient at low metal concentrations. In the last few years, non-conventional alternatives have been studied in search of better solutions in terms of costs and sustainability. Microbial adsorbents are one of the biomass-based sorbents that have extensively demonstrated excellent heavy metals removal capacity even at low concentrations. However, most of the carried-out research regarding their application in wastewater treatment has been performed in discontinuous systems. The use of microorganisms for the uptake of metal ions in continuous systems could be an important step for the upscale of the remediation processes since it facilitates a faster remediation of higher quantities of wastewaters loaded with heavy metals, in comparison with batch systems removal. Thus, the current research aims to analyze the available studies focusing on the removal of metal ions from wastewaters using microorganisms, in continuous systems, with a focus on obtained performances, optimized experimental conditions, and the sustainability of the bioremoval process. The present work found that microbial-based remediation processes have demonstrated very good performances in continuous systems. Further sustainability analyses are required in order to apply the bioremediation technology in an optimized environmentally friendly way in large-scale facilities.

Environmental Life Cycle Assessment of small water resource recovery facilities: Comparison of mechanical and lagoon systems

Small water resource recovery facilities (WRRFs) serving communities with populations of less than 10,000 people account for 70% of centralized wastewater treatment systems in the United States. With growing interest globally in improving the sustainability of these systems, this study evaluated the environmental life cycle impact and land use tradeoffs of different lagoon and mechanical WRRFs across the diverse climate of Nebraska. Life cycle inventory including construction and operations was collected for 35 existing systems representing a range of commonly used mechanical WRRFs: oxidation ditch, extended aeration, and sequencing batch reactors, and lagoon treatment systems: complete retention, irrigation, and controlled discharge lagoons. Lagoons exhibit a significantly smaller environmental impact relative to mechanical WRRFs in all impact categories with exception of the smog category based on a 20-year design lifespan provided land is available for use; in contrast, on-site land use of lagoons was significantly higher than mechanical WRRFs, 73.7 ± 35.9 m²/capita and 2.4 ± 1.9 m²/capita, respectively. Lagoons on average exhibited significantly more impact associated with the construction phase in most impact categories (up to 80% in case of smog impacts) relative to mechanical WRRFs (<25%). The differences in contribution of the construction leads to the environmental impacts and comparisons between the technologies being sensitive to system lifespan and type of electric grid mix. Irrigation lagoon per capita excavation and cast-iron resource use was observed to decrease with increasing differences between evaporation and precipitation rates. Uncertainty of the environmental impacts within sites is primarily driven by variations in energy intensity within mechanical WRRFs and volumes of treated water within lagoons. Variability between facilities of similar technology groups is largely driven by a combination of site-specific factors including climate, design, and operations.

A Life Cycle Assessment of Organic and Chemical Fertilizers for Coffee Production to Evaluate Sustainability toward the Energy–Environment–Economic Nexus in Indonesia

Coffee is an important agricultural commodity that is branded according to its environmental criteria in the global market. Therefore, Indonesia’s coffee production system needs to be investigated to meet the demand for eco-labeling, which has become a consumer preference. This study aims to assess the comprehensive sustainability evaluation of coffee production nurtured by an organic fertilizing system (OFS), chemical-organic fertilizing system (COFS), and chemical fertilizing system (CFS) that focuses on the energy–environment–economic nexus. A life cycle assessment (LCA), life cycle cost analysis (LCC), and energy analysis were performed as methods to evaluate the environmental impact, economic performance, and energy requirement analysis. The results indicated that the OFS had superior performance in two sustainability aspects: resulting in the lowest environmental damage and generating the highest economic benefit. Simultaneously, COFS shows the highest sustainability performance as it consumes the least energy. In contrast, CFS indicated the lowest sustainability performance in all aspects: highest environmental impact, lowest economic benefit, and highest energy consumption. Therefore, OFS is strongly recommended to be applied broadly, considering its environmental and economic superiority. Consequently, massive OFS application was followed by higher energy consumption. Alternatively, COFS can be considered for application due to its higher energy performance, even though it can potentially result in higher environmental damage and lower economic benefit. However, the government should explicitly provide some effort for the broad application of OFS in financial and assistance support since the shifting process needs more time to adapt.

Environmental Assessment of Austrian Organic Dairy Farms With Closed Regional Production Cycles in a Less Favorable Production Area

Extensive dairy production in less favorable production areas has a long tradition in Austria. Nevertheless, dairy production also contributes considerable environmental impacts (EIs), e.g., greenhouse gas emissions, nutrient losses, and land use. Therefore, 20 organic dairy farms located in the Lungau region in Austria were assessed concerning their EIs via life cycle assessment (LCA). Cumulative exergy demand (CExD), normalized eutrophication potential (EP), aquatic ecotoxicity potential (AE), and global warming potential (GWP) were considered as impact categories to describe the farms' EIs. The farms were part of a pilot project aiming to produce high-quality dairy products and keep production cycles closed within the project region. Consequently, the purchase of key off-farm resources was only possible within the project region. We adapted existing life cycle inventories to account for those regional resource purchases. Subsequently, the EIs of the 20 farms were related to the functional units (FUs) of 1 kg energy-corrected milk (ECM) and 1 ha agricultural area for milk production and compared to a representative model dairy farm (MDF) that was created based on statistical data and average production values of organic Austrian dairy farms. Compared to the MDF, results show an ~58% lower EP per ha and 44% per kg ECM of the Lungau farms. Further, the CExD per ha was about 24% lower due to a lower use of resources caused by the lower production intensity of the Lungau farms. Regarding GWP, Lungau farms are favorable considering 1 ha as the FU, whereas the MDF seems advantageous if 1 kg ECM is used as the FU. However, caused by a high variation of purchased roughage and the lower production intensity, the Lungau farms cause higher AE, regardless of the FU. Overall, we identified three principal production parameters determining the environmental performance of milk production in a closed production cycle in a less favorable area, namely, (1) the stocking rate, (2) the fed concentrate, and (3) the purchased roughage. Using those inputs at moderate intensity, the extensively managed Lungau farms can competitively contribute to producing food, thus highlighting the importance of site-adapted agriculture.

Carbon footprint of different recovery options for the repulping reject from liquid packaging board waste treatment process

Liquid packaging board (LPB) is an integral part of storing and transporting liquid food. In addition to its significant advantages, LPB has been challenging the existing waste management sector since its introduction into the market. In most European countries, LPB waste is either incinerated or recycled in the recycling facilities where fibre is recycled, and the repulping reject is separated for incineration. Mechanical recycling and chemical recycling processes are other options for repulping reject treatment. This study used life cycle assessment (LCA) to compare the environmental impacts of three treatment processes, incineration, mechanical recycling and chemical recycling; each was considered with the functional unit of 1 tonne of repulping reject. Furthermore, two sub-scenarios based on the substituted heat produced by energy from the treatment processes were considered. In substituting biomass-based heat sources, chemical recycling generated the lowest greenhouse gas (GHG) emissions, about 560 kg CO₂ eq. tonne^-1 repulping rejects, followed by the mechanical recycling process (approximately 740 kg CO₂ eq. tonne^-1 repulping reject). The maximum amount of GHG was emitted from the incineration scenario, which was about 1900 kg CO₂ eq. tonne^-1 repulping rejects. By substituting natural gas-based heat sources, chemical recycling generated about 290 kg CO₂ eq. tonne^-1 repulping rejects. On the contrary, the mechanical recycling process generated about 430 kg CO₂ eq. tonne^-1 repulping rejects and incineration process generated 960 kg CO₂ eq. tonne^-1 repulping rejects. Uncertainty analysis showed that some assumptions significantly impact the results; however, the chemical recycling process had the lowest environmental impact in almost all uncertainty analysis.

Environmental and Cost Impacts of Food Waste in University Canteen from a Life Cycle Perspective

Food waste has caused double waste of resources in the food itself and the food supply chain of production, transportation, cooking, and processing, resulting in unnecessary greenhouse gas emissions and economic losses. This paper first conducted the quantification of students’ food waste and the collection of canteens operation data in the three canteens at Taiyuan University of Technology (China) in 2019 through the weighing method and interview. Then an integration of Life Cycle Assessment and Life Cycle Costing was used to quantify the impact of food waste in university canteens on the environment and costs. The study found that the total amount of food waste in the university canteens with 22,000 students was 246.75 t/a, the carbon footprint caused by food waste was 539.28 t CO2-eq, and the cost was 4,729,900 yuan. Most of the impact of canteen meals on the environment comes from the use of energy in food cooking and the consumption of animal food types. The innovative integration of life cycle cost calculations highlights the key role of the labor required for cooking. The research results answer the basic scientific questions of how much food is wasted in the university canteens, and the carbon emissions and cost ratios of these wasted food in all links of the supply chain. The research results can provide a policy-making basis and data support for reducing food waste in universities and realizing carbon emission reduction in university canteens.

Environmental impacts and greenhouse gas emissions assessment for energy recovery and material recycle of the wastewater treatment plant

This study investigated the environmental burdens concerning the recycling/recovery process of a wastewater treatment plant's construction material waste and biogas. Detailed data inventories of case studies were employed in several scenarios to explore the role of end-of-life treatment methods. The ReCiPe 2016 and the Greenhouse gas Protocol life cycle impact methods were conducted to measure the impact categories. The construction and demolition phases were considered for recycling potential assessment, while the operational phase was examined for assessing the advantages of energy recovery. Metal and concrete recycling show environmental benefits. Increasing the reprocessing rate requires more water consumption but results in: firstly, a decrease of 18.8% in total damage; secondly, reduces problematic mineral scarcity by 3.9%; and thirdly, a shortfall in fossil fuels amounting to 11.6%. Recycling concrete helps to reduce the amount of GHG emissions 1.4-fold. Different biogas treatment methods contribute to various outcomes. Biogas utilization for on-site energy purposes has more advantages than flaring and offsite consumption. Electricity and heat generation originating from biogas can provide 70% of the energy requirement and replace 100% natural gas usage. Biomethane production from biogas requires extreme power and more resources. Meanwhile, producing heat and electricity can offset 102.9 g of fossil CO₂, and manufacturing biomethane contributes the equivalent of 101.2 g of fossil fuel-derived CO₂. Reducing 10% of recovered electricity creation could rise 19.19% global warming indicator of the wastewater treatment plant.

Assessment of small mechanical wastewater treatment plants: Relative life cycle environmental impacts of construction and operations

Many slow growing and shrinking rural communities struggle with aging or inadequate wastewater treatment plants (WWTPs), and face challenges in constructing and operating such facilities. Although existing literature has provided insight into the environmental sustainability of large facilities, including both the construction and operational phases, these studies have not examined small, rural facilities treating less than 7000 m³/d (1.8 MGD) of wastewater in adequate depth and breadth. In this study, a detailed inventory of the construction and operational data for 16 case studies of small WWTPs was developed to elucidate their environmental life cycle impacts. An attributional LCA framework was followed. The results show that the environmental impacts of both the construction and operational phases are considerable. Energy use was the dominant contributor to the operational environmental impact, and improving energy efficiency of a plant may reduce the environmental impacts of a small WWTP. Construction impacts can vary considerably between facilities (e.g., coefficient of variation for the construction impacts ranged from 60% to 78% depending on the impact category). Process-related factors (e.g., concrete and reinforcing steel used in basins) are typically sized using the design flow; thus, much of the variability in construction impacts among plants stems from the non-process related infrastructure. Multiple regression analysis was used as an exploratory tool to identify which non-process related plant aspects contribute to the variable environmental impact of small WWTPs. These factors include aluminum, cast iron, and the capacity utilization ratio (defined as the ratio of average flow to design flow). Thus, industry practitioners should consider these factors when aiming to reduce the environmental impacts of a small WWTP related to construction. Scenario sensitivity analyses found that the environmental impact of construction became smaller with longer design life, and the end-of-life consideration does not heavily influence the environmental sustainability of a WWTP.

Environmental benefits of pet food obtained as a result of the valorisation of meat fraction derived from packaged food waste

The 2030 Agenda of the United Nations includes the objective of setting up sustainable production patterns by pursuing several Sustainable Development Goals. Among them, the "Responsible production and consumption" is a key topic in the food production and is strictly connected with the "Climate action"; the crucial point, however, is how to jointly act on all these aspects and apply them in practice. The waste yearly produced in the food chain represent both an ethical, economic and environmental issue. In particular, as far as the recovery of packaged food waste from retailers is concerned, the valorisation of the wasted meat is an extremely relevant issue. Pet food industries could be interested in valorising this waste fraction to replace meat coming from slaughters in their product recipes. This article evaluates the environmental impact of valorising meat fraction from packaged food waste to produce two different recipes of high quality pet food, called Natura and Pâté. A life cycle assessment of the current scenario (traditional pet food production and landfilling of packaged food waste) and of a new one (pet food production using meat fraction from packaged food waste) is carried out applying the ReCiPe 2016 method of impact assessment. Real data have been taken from retailers and pet food manufacturer. The production of pet food using the meat fraction from packaged food waste generates on average lower environmental impacts if compared to the traditional process, in terms of GWP (-56.40%), water consumption (-22.62%), land use (-87.50%) and fossil resource scarcity (-21.78%). Benefits are interesting even if considering the production of Pâté (-14.66%), for which the traditional production process makes use of some slaughter by-products. The proposed industrial process is demonstrated to be sustainable from an environmental point of view and appears to be in line with Sustainable Development Goals (SDGs) 2, 12 and 13.

Environmental and Economic Assessments and Uncertainties of Multiple Lignocellulosic Biomass Utilization for Bioenergy Products: Case Studies

Life-cycle assessment (LCA) and techno-economic analysis (TEA) were applied to assess the economic feasibility and environmental benefits of utilizing multiple biomass feedstocks for bioenergy products under three different technological pathways with consideration of uncertainties. Three cases were studied for the production of pellets, biomass-based electricity, and pyrolysis bio-oil. A Monte Carlo simulation was used to examine the uncertainties of fossil energy consumption, bioenergy conversion efficiency, stochastic production rate, etc. The cradle-to-gate LCA results showed that pellet production had the lowest greenhouse gas (GHG) emissions, water and fossil fuels consumption (8.29 kg CO2 eq (equivalent), 0.46 kg, and 105.42 MJ, respectively). The conversion process presented a greater environmental impact for all three bioenergy products. When producing 46,929 Mg of pellets, 223,380 MWh of electricity, and 78,000 barrels of pyrolysis oil, the net present values (NPV) indicated that only pellet and electricity production were profitable with NPVs of $1.20 million for pellets, and $5.59 million for biopower. Uncertainty analysis indicated that pellet production showed the highest uncertainty in GHG emission, and bio-oil production had the least uncertainty in GHG emission but had risks producing greater-than-normal amounts of GHG. Biopower production had the highest probability to be a profitable investment with 85.23%.

Food waste management during the COVID-19 outbreak: a holistic climate, economic and nutritional approach

Improving the food supply chain efficiency has been identified as an essential means to enhance food security, while reducing pressure on natural resources. Adequate food loss and waste (FLW) management has been proposed as an approach to meet these objectives. The main hypothesis of this study is to consider that the "strong fluctuations and short-term changes" on eating habits may have major consequences on potential FLW generation and management, as well as on GHG emissions, all taking into account the nutritional and the economic cost. Due to the exceptional lockdown measures imposed by the Spanish government, as a consequence of the emerging coronavirus disease, COVID-19, food production and consumption systems have undergone significant changes, which must be properly studied in order to propose strategies from the lessons learned. Taking Spain as a case study, the methodological approach included a deep analysis of the inputs and outputs of the Spanish food basket, the supply chain by means of a Material Flow Analysis, as well as an economic and comprehensive nutritional assessment, all under a life cycle thinking approach. The results reveal that during the first weeks of the COVID-19 lockdown, there was no significant adjustment in overall FLW generation, but a partial reallocation from extra-domestic consumption to households occurred (12% increase in household FLW). Moreover, the economic impact (+11%), GHG emissions (+10%), and the nutritional content (-8%) complete the multivariable impact profile that the COVID-19 outbreak had on FLW generation and management. Accordingly, this study once again highlights that measures aimed at reducing FLW, particularly in the household sector, are critical to make better use of food surpluses and FLW prevention and control, allowing us to confront future unforeseen scenarios.

Foundry Sand Source Reduction Options: Life Cycle Assessment Evaluation

Foundries represent a significant part of the world’s economy and are a large consumer of energy and producer of solid waste. Sand-handling processes can use 5–10% of a foundry’s total energy. The goal of this research was to explore source reduction and waste minimization at a foundry, using both economic and Life Cycle Assessment (LCA) techniques to compare three secondary sand-reclamation options. LCA software modeled all sand processes at a mid-sized ferrous foundry in the USA. The LCA showed all secondary reclamation technologies, while more energy intensive at the foundry, lowered life cycle environmental impacts, including GHG emissions, ecotoxicity, and human health indicators, due primarily to source reduction and corresponding reduction in transportation both from the virgin sand source and to the landfill. Varying transportation distance had a large impact on LCA results to the point where the life cycle benefit of secondary reclamation became a liability in a zero distance scenario. Varying electricity generation to favor greener sources was also examined, but proved to have minimal impact on the LCA results. This research suggests that the greatest reduction of life cycle impacts in the sand-handling processes for a foundry is to find a geographically closer source for virgin sand.

Environmental impact assessment of the implementation of a Deposit-Refund System for packaging waste in Spain: A solution or an additional problem?

Food and beverage packaging represent a relevant fraction of municipal solid waste, and its adequate management is critical. Selective waste collection by an authorized organization according to an Extended Producer Responsibility System (EPRS) is the current option implemented in Spain for packaging. Other European countries have selected an alternative or a complement: a Deposit-Refund System (DRS) for certain type of beverage packaging. The selection of an EPRS or a DRS is a complex task and this work developed a universal methodology for the evaluation of optimal waste packaging management systems, focused on food and beverage. Life Cycle Assessment (LCA) approach was applied to compare the current EPRS vs the implementation of a new system, with the coexistence of a DRS and a reduced EPRS. Although the environmental savings of the new system are superior to its impacts, even if the DRS would reach a value of 90% for the package return index, the current EPRS obtains significantly better environmental results. All impact categories are favorable to the current EPRS, except ADP, where the potentially higher DRS recycling rate is manifested. The impact associated to the flow of specific DRS packages in the new system is clearly higher than that linked to the flow of DRS excluded packages and it is even higher that the impact of the total joint flow in the current EPRS for all categories except ADP. The fundamental cause of this high impact is the backhauling stage to transport the recovered packages to the counting plants without compacting. A sensitivity analysis confirmed the robustness of the preference of the current EPRS over the combination of a DRS and a reduced EPRS. The developed approach supposes a methodological advance that can be extended to previously realized studies about the implementation of waste management systems in other contexts.

Solid-State Fermentation (SSF) versus Submerged Fermentation (SmF) for the Recovery of Cellulases from Coffee Husks: A Life Cycle Assessment (LCA) Based Comparison

This article studies the environmental impacts of cellulase production by using a comparative attributional life cycle assessment (LCA) of two different scenarios of production. The first one is the commonly used submerged fermentation (SmF) using a pure substrate (cellulose powder) and a specific microorganism (Trichoderma reesei). The second scenario considers a novel system to produce enzymes and simultaneously treat a waste using the solid-state fermentation (SSF) process of coffee husk (CH) used as substrate. Experimental data were used in this scenario. The complete production process was studied for these two technologies including the fermentation phase and the complete downstream of cellulase. Life cycle inventory (LCI) data were collected from the database EcoInvent v3 (SimaPro 8.5) modified by data from literature and pilot scale experiments. The environmental impacts of both production systems revealed that those of SmF were higher than those of SSF. A sensitivity analysis showed that the results are highly conditioned by the energy use in the form of electricity during lyophilization, which is needed in both technologies. The results point to a possible alternative to produce the cellulase enzyme while reducing environmental impacts.

Life cycle assessment of nutrient recycling from wastewater: A critical review

Recovering resources from wastewater systems is increasingly being emphasised. Many technologies exist or are under development for recycling nutrients such as nitrogen and phosphorus from wastewater to agriculture. Planning and design methodologies are needed to identify and deploy the most sustainable solutions in given contexts. For the environmental sustainability dimension, life cycle assessment (LCA) can be used to assess environmental impact potentials of wastewater-based nutrient recycling alternatives, especially nitrogen and phosphorus recycling. This review aims to evaluate how well the LCA methodology has been adapted and applied for assessing opportunities of wastewater-based nutrient recycling in the form of monomineral, multimineral, nutrient solution and organic solid. We reviewed 65 LCA studies that considered nutrient recycling from wastewater for agricultural land application. We synthesised some of their insights and methodological practices, and discussed the future outlook of using LCA for wastewater-based nutrient recycling. In general, more studies suggested positive environmental outcomes from wastewater-based nutrient recycling, especially when chemical inputs are minimised, and source separation of human excreta is achieved. The review shows the need to improve methodological consistency (e.g., multifunctionality, fertiliser offset accounting, contaminant accounting), ensure transparency of inventory and methods, consider uncertainty in comparative LCA context, integrate up-to-date cross-disciplinary knowledge (e.g., agriculture science, soil science) into LCA models, and consider the localised impacts of recycled nutrient products. Many opportunities exist for applying LCA at various scales to support decisions on wastewater-based nutrient recycling - for instance, performing "product perspective" LCA on recycled nutrient products, integrating "process perspective" LCA with other systems approaches for selecting and optimising individual recovery processes, assessing emerging nutrient recovery technologies and integrated resource recovery systems, and conducting systems analysis at city, national and global level.

Uncertainty Analysis for Data-Driven Chance-Constrained Optimization

In this contribution our developed framework for data-driven chance-constrained optimization is extended with an uncertainty analysis module. The module quantifies uncertainty in output variables of rigorous simulations. It chooses the most accurate parametric continuous probability distribution model, minimizing deviation between model and data. A constraint is added to favour less complex models with a minimal required quality regarding the fit. The bases of the module are over 100 probability distribution models provided in the Scipy package in Python, a rigorous case-study is conducted selecting the four most relevant models for the application at hand. The applicability and precision of the uncertainty analyser module is investigated for an impact factor calculation in life cycle impact assessment to quantify the uncertainty in the results. Furthermore, the extended framework is verified with data from a first principle process model of a chloralkali plant, demonstrating the increased precision of the uncertainty description of the output variables, resulting in 25% increase in accuracy in the chance-constraint calculation.

A Stochastic Approach to LCA of Internal Insulation Solutions for Historic Buildings

Internal insulation is a typical renovation solution in historic buildings with valuable façades. However, it entails moisture-related risks, which affect the durability and life-cycle environmental performance. In this context, the EU project RIBuild developed a risk assessment method for both hygrothermal and life-cycle performance of internal insulation, to support decision-making. This paper presents the stochastic Life Cycle Assessment method developed, which couples the LCA model to a Monte-Carlo simulation, providing results expressed by probability distributions. It is applied to five insulation solutions, considering different uncertain input parameters and building heating scenarios. In addition, the influence of data variability and quality on the result is analyzed, by using input data from two sources: distributions derived from a generic Life Cycle Inventory database and “deterministic” data from Environmental Product Declarations. The outcomes highlight remarkable differences between the two datasets that lead to substantial variations on the systems performance ranking at the production stage. Looking at the life-cycle impact, the general trend of the output distributions is quite similar among simulation groups and insulation systems. Hence, while a ranking of the solutions based on a “deterministic” approach provides misleading information, the stochastic approach provides more realistic results in the context of decision-making.

Environmental assessment of the food packaging waste management system in Spain: Understanding the present to improve the future

One-way packaging can represent up to half the environmental impacts of the food value chain and thus optimising its management is essential. Collective selective waste collection managed by authorised organisations (Extended Producer Responsibility, EPR), with or without Deposit-Refund Systems (DRS) are alternatives implemented at European level to handle this problem. Since there is no single simple formula that can be applied to every waste management system, this case study is focused on the entire Spanish model of one-way food packaging waste management, from collection of each fraction in specific containers to final treatment, considering eight different materials. For the analysis, six different impact categories were considered: abiotic depletion potential, global warming potential, acidification potential, eutrophication potential, ozone depletion potential and photochemical ozone formation. Results reveal that the recycling stage is the main stage contributing to the environmental impacts, but the environmental savings related to the recovery of materials in this stage compensates these loads and the system must be considered advantageous for the environment. By contrast, sorting plants present the lowest contributions and is the least significant stage. Significant environmental improvements (close to 10%) would be achieved by addressing the total bulk collection flow to mechanical-biological treatment and increasing the selective collection of light and glass packaging waste. This study can serve to identify common drivers that contribute significantly to the development of an integrated approach to waste packaging management and as baseline for comparison studies with alternative waste recovery technologies and systems.

Combining Hydrologic Analysis and Life Cycle Assessment Approaches to Evaluate Sustainability of Water Infrastructure: Uncertainty Analysis

The goal of this research is identifying major sources of uncertainty of an environmentally-sustainable urban drainage infrastructure design, based on hydrologic analysis and life cycle assessment (LCA). The uncertainty analysis intends to characterize and compare relative roles of unreliability, incompleteness, technological difference, and spatial and temporal variation in life cycle impact assessment (LCIA) data, as well as natural variability in hydrologic data. Uncertainties are analyzed using a robust Monte Carlo simulation approach, performed by High Throughput Computing (HTC) and interpreted by Morse-Scale regression models. The uncertainty analysis platform is applied to a watershed-scale LCA of rainwater harvesting systems (RWH) to control combined sewer overflows (CSOs). To consider the watershed-scale implications, RWH is simulated to serve for both the water supply and CSO control in an urban watershed in Toledo, Ohio, USA. Results suggest that, among the studied parameters, rainfall depth (as a hydrologic parameter) caused more than 86% of the uncertainty, while only 7% of the uncertainty was caused by LCIA parameters. Such an emphasis on the necessity of robust hydrologic data and associated analyses increase the reliability of LCA-based urban water infrastructure design. In addition, results suggest that such a topology-inspired model is capable of rendering an optimal RWH system capacity as a function of annual rainfall depth. Specifically, if the system could capture 1/40th of annual rainfall depth in each event from rooftops, the RWH system would be optimal and, thus, lead to minimized life cycle impacts in terms of global warming potential (GWP) and aquatic eco-toxicity (ETW). This capture depth would be around 2.1 cm for Toledo (given an 85 cm/year rainfall and 200 m2 typical roof area), which could be achieved through an RWH system with 4.25 m3 capacity per household, assuming a uniform plan for the entire studied watershed. Capacities smaller than this suggested optimal value would likely result in loss of RWH potable water treatment savings and CSO control benefits, while capacities larger than the optimal would likely incur an excessive wastewater treatment burden and construction phase impacts of RWH systems.

A comparative life cycle assessment for sustainable cement production in Turkey

Recently, a considerable increase has occurred in cement manufacturing, which is a highly energy intensive, resource consuming, and carbon emission industry based on industrialization and urbanization. In order to minimize the adverse effects from this industry on climate change, ecosystem quality, human health, and resources for cement production, it is very important to assess the potential environmental impacts of the cement production process. In this study, a comparative life cycle assessment (LCA) of cement production with traditional raw material and fuel (traditional scenario [TS]) and alternative raw material and fuel (alternative scenario [AS]) usage were performed in accordance with International Organization for Standardization (ISO) 14040 and 14044 standards. The scope of the study was determined as "cradle to gate" including raw material acquisition, transportation, and manufacturing stages. The functional units were 1 ton of clinker and 1 ton of cement. SimaPro 8.0.4 software was used for the LCA, and impact assessment was carried out using the IMPACT 2002 + method. As a result of the LCA for clinker production, the overall environmental impact was reduced by approximately 12% in the AS. According to damage assessment, the effects on climate change, human health, ecosystem quality, and resources decreased 1.4%, 27%, 10%, and 11%, respectively. The use of alternative fuel and raw material had approximately 3% positive impact on overall environmental burden of clinker production. Considering cement types, the lowest environmental impacts were determined for CEM IV and CEM II based on trass usage.

Evaluating the Environmental Performance of a Product/Service-System Business Model for Merino Wool Next-to-Skin Garments: The Case of Armadillo Merino®

Circular business models are often enabled by means of product/service-systems (PSS). The common perception is that such business models have enhanced environmental performance when compared to conventional business models rooted in the linear economy. This article investigates the environmental potential of developing a use-oriented PSS business model for Merino wool t-shirts intended for use by the British Ministry of Defence as an alternative to the present supply system based on synthetic t-shirts purchased from sportswear clothing companies. To conduct the assessment, we apply the life cycle assessment (LCA) methodology to quantify and compare the climate change impacts and impact potentials of the proposed PSS business model and of a reference business model. Results showed that there could be significant contribution of quantifying environmental potential for PSS business models when justifying the transition to a circular economy. However, when adopting LCA methodology for this purpose, the design of the PSS needs to be well thought to overcome some of the identified challenges. The article concludes by making the case that LCA studies can support the definition, design and value creation of the product/service-systems in early development stages.

Life Cycle Assessment and Environmental Valuation of Biochar Production: Two Case Studies in Belgium

It is unclear whether the production of biochar is economically feasible. As a consequence, firms do not often invest in biochar production plants. However, biochar production and application might be desirable from a societal perspective as it might entail net environmental benefits. Hence, the aim of this work has been to assess and monetize the environmental impacts of biochar production systems so that the environmental aspects can be integrated with the economic and social ones later on to quantify the total return for society. Therefore, a life cycle analysis (LCA) has been performed for two potential biochar production systems in Belgium based on two different feedstocks: (i) willow and (ii) pig manure. First, the environmental impacts of the two biochar production systems are assessed from a life cycle perspective, assuming one ton of biochar as the functional unit. Therefore, LCA using SimaPro software has been performed both on the midpoint and endpoint level. Biochar production from willow achieves better results compared to biochar from pig manure for all environmental impact categories considered. In a second step, monetary valuation has been applied to the LCA results in order to weigh environmental benefits against environmental costs using the Ecotax, Ecovalue, and Stepwise approach. Consequently, sensitivity analysis investigates the impact of variation in NPK savings and byproducts of the biochar production process on monetized life cycle assessment results. As a result, it is suggested that biochar production from willow is preferred to biochar production from pig manure from an environmental point of view. In future research, those monetized environmental impacts will be integrated within existing techno-economic models that calculate the financial viability from an investor’s point of view, so that the total return for society can be quantified and the preferred biochar production system from a societal point of view can be identified.

Sustainability assessment of agricultural rainwater harvesting: Evaluation of alternative crop types and irrigation practices

Rainwater harvesting (RWH) has been used globally to address water scarcity for various ecosystem uses, including crop irrigation requirements, and to meet the water resource needs of a growing world population. However, the costs, benefits and impacts of alternative crop types and irrigation practices is challenging to evaluate comprehensively. We present an assessment methodology to evaluate the sustainability of agricultural systems as applied to a southeastern U.S. river basin. We utilized detailed, crop-level cultivation information to calculate sustainability indicators (relative to well-water irrigation) at the basin scale (6-digit Hydrologic Unit Codes). 40 design configurations comprising crop types and irrigation practices were evaluated to demonstrate the methodology's robustness. Four RWH designs and four major crops (pasture-grass, soybeans, corn, and cotton) resembling current practices were evaluated, as well as six combined systems (combined RWH and well-water systems) with four globally representative crops (corn, soybeans, wheat, and quinoa). Sustainability scores were calculated by integrating seven life cycle impact indicators (cumulative energy demand, CO2 emission, blue water use, ecotoxicity, eutrophication, human health-cancer, and life cycle costs). At a basin-wide RWH adoption rate of 25%, the benefits, relative to 100% well-water, of the RWH systems irrigating soybeans and supported with well-water (0.4 well-water: 0.6 RWH) provided cumulative energy savings of 39 Peta Joule and reductions in CO2 emission, blue water use, ecotoxicity, eutrophication, and human health-cancer at 1.9 Mt CO2 eq., 6.9 Gm3, 5.7 MCTU, 6.6 kt N eq., and 0.07 CTU, respectively. These benefits increased linearly with RWH scaling variables including the adoption rates, system service life, crop area, and water needs. Our methodology integrates the three pillars of agricultural sustainability specific to rainwater harvesting into a single score. It is applicable to other locations worldwide facing water scarcity by modifying the RWH system design, selecting other crop types, and obtaining appropriate data.

Life cycle assessment of a rainwater harvesting system compared with an AC condensate harvesting system

This study presents a life cycle assessment (LCA) of a rainwater harvesting (RWH) system and an air-conditioning condensate harvesting (ACH) system for non-potable water reuse. U.S. commercial buildings were reviewed to design rooftop RWH and ACH systems for one to multi-story buildings' non-potable water demand. A life cycle inventory was compiled from the U.S. EPA's database. Nine scenarios were analyzed, including baseline RWH system, ACH system, and combinations of the two systems adapted to 4-story and 19-story commercial buildings in San Francisco and a 4-story building in Washington, DC. Normalization of 11 life cycle impact assessment categories showed that RWH systems in 4-story buildings at both locations outperformed ACH systems (45-80% of ACH impacts) except equivalent in Evaporative Water Consumption. However, San Francisco's ACH system in 19-story building outperformed the RWH system (51-83% of RWH impacts) due to the larger volume of ACH collection, except equivalent in Evaporative Water Consumption. For all three buildings, the combined system preformed equivalently to the better-performing option (≤4-8% impact difference compared to the maximum system). Sensitivity analysis of the volume of water supply and building occupancy showed impact-specific results. Local climatic conditions, rainfall, humidity, water collections and demands are important when designing building-scale RWH and ACH systems. LCA models are transferrable to other locations with variable climatic conditions for decision-making when developing and implementing on-site non-potable water systems.

Bottom-up approach in the assessment of environmental impacts and costs of an innovative anammox-based process for nitrogen removal

In recent decades, the wastewater treatment sector has undergone a shift to adapt to increasing discharge limits. In addressing the evaluation of innovative technologies, it is necessary to determine the scale at which reliable and representative values of environmental impacts and costs can be obtained, ensuring that the system under assessment follows the direction of eco-efficiency. This study has evaluated the environmental and economic indicators of an autotrophic nitrogen removal technology (ELAN^®) from laboratory conception (1.5 L) to full scale (2 units of 115 m³) using the Life Cycle Assessment (LCA) methodology. Indirect emissions related to electricity consumption are the main contributor in all impact categories except eutrophication. Electricity consumption referred to the functional unit (1 m³ of treated wastewater) decreases as the scale increases. The rationale behind this can be explained, among other reasons, by the low energy efficiency of small-scale equipment (pumps and aerators). Accordingly, a value of approximately 25 kg CO_2eq per m³ of treated water is determined for laboratory scale, compared to only 5 kg CO_2eq per m³ at full-scale. When it comes to assessing the reliability of data, a pilot scale system of 0.2 m³ allowed to perform a trustworthy estimation of environmental indicators, which were validated at full-scale. In terms of operational costs, the scale of approximately 1 m³ provided a more accurate estimate of the costs associated with energy consumption.

Building Retrofit Measures and Design: A Probabilistic Approach for LCA

Green building design and architecture have become widespread tenets in the development of sustainable buildings. In this context, the use of sustainable materials and the awareness of resource/energy consumption are strategic aspects to consider for the improvement of building performances. This paper presents a new and structured approach to address uncertainty and sensitivity analysis in Life Cycle Assessment (LCA) to support the decision-making process in building renovation. This “probabilistic” approach to LCA allows for the obtaining of results expressed as ranges of environmental impacts and for alternative solutions, offering an idea of the meaning of input parameters’ uncertainties and their influence on the result. The approach includes (i) the assessment of inputs’ uncertainties (represented by Probability Density Functions—PDF); (ii) the data sampling; and (iii) the uncertainty propagation (Monte Carlo method). Variance decomposition techniques have been used to sample inputs’ PDFs and assess their impact on the LCA result distribution (sensitivity analysis). The methodology application is illustrated through a case study where three building retrofit measures were assessed. Results provide an insight about the uncertainties of LCA indicators in terms of climate change and nonrenewable energy. The input parameters related to the use phase are confirmed as the most influential in building LCA.

Integrating uncertainties to the combined environmental and economic assessment of algal biorefineries: A Monte Carlo approach

The economic and environmental performance of microalgal processes has been widely analyzed in recent years. However, few studies propose an integrated process-based approach to evaluate economic and environmental indicators simultaneously. Biodiesel is usually the single product and the effect of environmental benefits of co-products obtained in the process is rarely discussed. In addition, there is wide variation of the results due to inherent variability of some parameters as well as different assumptions in the models and limited knowledge about the processes. In this study, two standardized models were combined to provide an integrated simulation tool allowing the simultaneous estimation of economic and environmental indicators from a unique set of input parameters. First, a harmonized scenario was assessed to validate the joint environmental and techno-economic model. The findings were consistent with previous assessments. In a second stage, a Monte Carlo simulation was applied to evaluate the influence of variable and uncertain parameters in the model output, as well as the correlations between the different outputs. The simulation showed a high probability of achieving favorable environmental performance for the evaluated categories and a minimum selling price ranging from $11gal^-1 to $106gal^-1. Greenhouse gas emissions and minimum selling price were found to have the strongest positive linear relationship, whereas eutrophication showed weak correlations with the other indicators (namely greenhouse gas emissions, cumulative energy demand and minimum selling price). Process parameters (especially biomass productivity and lipid content) were the main source of variation, whereas uncertainties linked to the characterization methods and economic parameters had limited effect on the results.

Life cycle assessment of recycled concretes: A case study in southern Italy

Concrete industry is responsible of the most significant contribution to the global warming due to the large amount of substances with environmental impacts produced during its entire life cycle (production process, construction, maintenance, dismantlement, and scrapping). The most important issue characterizing the concrete industry is related to the constant growth of consumption of natural aggregates. The purpose of the present research is to apply the standard protocol of life cycle assessment to 3 different concrete mixtures composed by wastes from construction and demolition (C&D), marble sludge and cement kiln dust (CDK) in order to compare the environmental and energy impacts. The main purpose is to analyze the potentials (capabilities/benefits) of recycled aggregate concrete. The proposed model analyses 37 recovery possible scenarios. The results were analyzed with the software SimaPro© and with the life cycle impact assessment method Eco Indicator 99. The results show how it is possible to decide for the optimal solution in order to reduce emissions and impacts due to the concrete production.

Bioenergy and bioproducts from municipal organic waste as alternative to landfilling: a comparative life cycle assessment with prospective application to Mexico

A life cycle assessment (LCA) of a four-stage biorefinery concept, coined H-M-Z-S, that converts 1 t of organic fraction of municipal solid waste (OFMSW) into bioenergy and bioproducts was performed in order to determine whether it could be an alternative to common disposal of OFMSW in landfills in the Mexican reality. The OFMSW is first fermented for hydrogen production, then the fermentates are distributed 40 % to the methane production, 40 % to enzyme production, and 20 % to the saccharification stage. From hydrogen and methane, up to 267 MJ and 204 kWh of gross heat and electricity were produced. The biorefinery proved to be self-sustainable in terms of power (95 kWh net power), but it presented a deficit of energy for heating services (-155 MJ), which was partially alleviated by digesting the wastes from the bioproducts stages (-84 MJ). Compared to landfill, biorefinery showed lower environmental impacts in global warming (down to -128 kg CO₂-eq), ozone layer depletion (2.96 × 10^-6 kg CFC₁₁-eq), and photochemical oxidation potentials (0.011 kg C₂H₄-eq). The landfarming of the digestates increased significantly the eutrophication impacts, up to 20 % below the eutrophication from landfilling (1.425 kg PO₄-eq). These results suggest that H-M-Z-S biorefinery could be an attractive alternative compared to conventional landfilling for the management of municipal solid wastes, although new alternatives and uses of co-products and wastes should be explored and tested. Moreover, the biorefinery system would benefit from the integration into the market chain of the bioproducts, i.e., enzymes and hydrolysates among others.

When product diversification influences life cycle impact assessment: A case study of canned anchovy

The anchovy canning industry is one of the most important economic resources of the Cantabria region in Spain. However, environmental, economic and social problems over the past years have forced companies to apply marketing strategies, develop product diversification, create new products and introduce them in new "green markets". Launching Cantabrian canned anchovies into more sustainable markets requires measuring the environmental performance using Product Category Rules (PCRs) and Environmental Product Declarations (EPDs). EPDs and PCRS include the environmental profile of a range of similar products, such as all of the available canned anchovy products. The great variety of anchovy canned products depends on three process variables: the origin of the anchovy (Cantabria, Argentina and Chile or Peru), the type of oil (refined olive oil, extra virgin olive oil and sunflower oil) and the packaging (aluminum, tinplate, glass and plastic). This work aims to assess the environmental impact from cradle to grave of canned anchovies in oil using the life cycle assessment methodology (LCA). Moreover, the paper evaluates the influence of the above-mentioned three product variables in the LCA results. The results show that out of all of the alternatives, Chilean and Peruvian anchovies have the highest environmental burdens due to the transportation by ship. The production of anchovies in sunflower oil is a less environmentally friendly oil process due to the low yield per hectare of sunflower cultivation. Finally, the use of aluminum as the packaging material has the largest environmental impact out of almost all of the impact categories. Moreover, because the LCA results can be significantly affected by the allocation procedure, a sensitivity analysis comparing system expansion, mass and economic allocation is performed. In this case, the system expansion approach presents the highest environmental impacts followed by the mass allocation.

Economic and environmental assessment of cellulosic ethanol production scenarios annexed to a typical sugar mill

In this work different biorefinery scenarios were investigated, concerning the co-production of bioethanol and electricity from available lignocellulose at a typical sugar mill, as possible extensions to the current combustion of bagasse for steam and electricity production and burning trash on-filed. In scenario 1, the whole bagasse and brown leaves is utilized in a biorefinery and coal is burnt in the existing inefficient sugar mill boiler. Scenario 2 & 3 are assumed with a new centralized CHP unit without/with coal co-combustion, respectively. Also, through scenarios 4 & 5, the effect of water insoluble loading were studied. All scenarios provided energy for the sugarmill and the ethanol plant, with the export of surplus electricity. Economic analysis determined that scenario 1 was the most viable scenario due to less capital cost and economies-of scale. Based on Life Cycle Assessment (LCA) results, scenario 2 outperformed the other scenarios, while three scenarios showed lower contribution to environmental burdens than the current situation.

Multi-product biorefineries from lignocelluloses: a pathway to revitalisation of the sugar industry?

BACKGROUND

Driven by a range of sustainability challenges, e.g. climate change, resource depletion and expanding populations, a circular bioeconomy is emerging and expected to evolve progressively in the coming decades. South Africa along with other BRICS countries (Brazil, Russia, India and China) represents the emerging bioeconomy and contributes significantly to global sugar market. In our research, South Africa is used as a case study to demonstrate the sustainable design for the future biorefineries annexed to existing sugar industry. Detailed techno-economic evaluation and Life Cycle Assessment (LCA) were applied to model alternative routes for converting sugarcane residues (bagasse and trash) to selected biofuel and/or biochemicals (ethanol, ethanol and lactic acid, ethanol and furfural, butanol, methanol and Fischer-Tropsch synthesis, with co-production of surplus electricity) in an energy self-sufficient biorefinery system.

RESULTS

Economic assessment indicated that methanol synthesis with an internal rate of return (IRR) of 16.7% and ethanol-lactic acid co-production (20.5%) met the minimum investment criteria of 15%, while the latter had the lowest sensitivity to market price amongst all the scenarios. LCA results demonstrated that sugarcane cultivation was the most significant contributor to environmental impacts in all of the scenarios, other than the furfural production scenario in which a key step, a biphasic process with tetrahydrofuran solvent, had the most significant contribution.

CONCLUSION

Overall, the thermochemical routes presented environmental advantages over biochemical pathways on most of the impact categories, except for acidification and eutrophication. Of the investigated scenarios, furfural production delivered the inferior environmental performance, while methanol production performed best due to its low reagent consumption. The combined techno-economic and environmental assessments identified the performance-limiting steps in the 2G biorefinery design for sugarcane industry and highlighted the technology development opportunities under circular bioeconomy context.

Economic and environmental evaluation of nitrogen removal and recovery methods from wastewater

The driver for waste-based economic growth is long-term strategic design, and a paradigm-shift from waste treatment to resource recovery. This study aims to use an integrated modelling approach to evaluate the holistic economic and environmental profiles of three alternative nitrogen removal and recovery methods integrated into wastewater treatment systems, including conventional nitrification-denitrification, Anammox, and the anaerobic ion exchange route, to provide insights into N recovery system designs which are key elements in building a sustainable circular economy. Our results suggest that ion exchange is a promising technology showing high N removal-recovery efficiency from municipal wastewater and delivering competitive sustainability scores. In comparison with the well-developed conventional route, ion exchange and Anammox are undergoing significant research and development; as highlighted in sensitivity analyses, there is considerable room for process design and optimisation of ion exchange systems to achieve economically and environmentally optimal performance.

Uncovering the Recycling Potential of "New" WEEE in China

Newly defined categories of WEEE have increased the types of China's regulated WEEE from 5 to 14. Identification of the amounts and valuable-resource components of the "new" WEEE generated is critical to solving the e-waste problem, for both governmental policy decisions and recycling enterprise expansions. This study first estimates and predicts China's new WEEE generation for the period of 2010-2030 using material flow analysis and the lifespan model of the Weibull distribution, then determines the amounts of valuable resources (e.g., base materials, precious metals, and rare-earth minerals) encased annually in WEEE, and their dynamic transfer from in-use stock to waste. Main findings include the following: (i) China will generate 15.5 and 28.4 million tons WEEE in 2020 and 2030, respectively, and has already overtaken the U.S. to become the world's leading producer of e-waste; (ii) among all the types of WEEE, air conditioners, desktop personal computers, refrigerators, and washing machines contribute over 70% of total WEEE by weight. The two categories of EEE-electronic devices and electrical appliances-each contribute about half of total WEEE by weight; (iii) more and more valuable resources have been transferred from in-use products to WEEE, significantly enhancing the recycling potential of WEEE from an economic perspective; and (iv) WEEE recycling potential has been evolving from ∼16 (10-22) billion US$ in 2010, to an anticipated ∼42 (26-58) billion US$ in 2020 and ∼73.4 (44.5-103.4) billion US$ by 2030. All the obtained results can improve the knowledge base for closing the loop of WEEE recycling, and contribute to governmental policy making and the recycling industry's business development.

Life cycle assessment on biogas production from straw and its sensitivity analysis

This study aims to investigate the synthetically environmental impacts and Global Warming Potentials (GWPs) of straw-based biogas production process via cradle-to-gate life cycle assessment (LCA) technique. Eco-indicator 99 (H) and IPCC 2007 GWP with three time horizons are utilized. The results indicate that the biogas production process shows beneficial effect on synthetic environment and is harmful to GWPs. Its harmful effects on GWPs are strengthened with time. Usage of gas-fired power which burns the self-produced natural gas (NG) can create a more sustainable process. Moreover, sensitivity analysis indicated that total electricity consumption and CO2 absorbents in purification unit have the largest sensitivity to the environment. Hence, more efforts should be made on more efficient use of electricity and wiser selection of CO2 absorbent.

Bioethanol from poplar clone Imola: an environmentally viable alternative to fossil fuel?

BACKGROUND

Environmental issues, e.g. climate change, fossil resource depletion have triggered ambitious national/regional policies to develop biofuel and bioenergy roles within the overall energy portfolio to achieve decarbonising the global economy and increase energy security. With the 10 % binding target for the transport sector, the Renewable Energy Directive confirms the EU's commitment to renewable transport fuels especially advanced biofuels. Imola is an elite poplar clone crossed from Populus deltoides Bartr. and Populus nigra L. by Research Units for Intensive Wood Production, Agriculture Research Council in Italy. This study examines its suitability for plantation cultivation under short or very short rotation coppice regimes as a potential lignocellulosic feedstock for the production of ethanol as a transport biofuel. A life cycle assessment (LCA) approach was used to model the cradle-to-gate environmental profile of Imola-derived biofuel benchmarked against conventional fossil gasoline. Specific attention was given to analysing the agroecosystem fluxes of carbon and nitrogen occurring in the cultivation of the Imola biomass in the biofuel life cycle using a process-oriented biogeochemistry model (DeNitrification-DeComposition) specifically modified for application to 2G perennial bioenergy crops and carbon and nitrogen cycling.

RESULTS

Our results demonstrate that carbon and nitrogen cycling in perennial crop-soil ecosystems such as this example can be expected to have significant effects on the overall environmental profiles of 2G biofuels. In particular, soil carbon accumulation in perennial biomass plantations is likely to be a significant component in the overall greenhouse gas balance of future biofuel and other biorefinery products and warrants ongoing research and data collection for LCA models. We conclude that bioethanol produced from Imola represents a promising alternative transport fuel offering some savings ranging from 35 to 100 % over petrol in global warming potential, ozone depletion and photochemical oxidation impact categories.

CONCLUSIONS

Via comparative analyses for Imola-derived bioethanol across potential supply chains, we highlight priority issues for potential improvement in 2G biofuel profiling. Advanced clones of poplar such as Imola for 2G biofuel production in Italy as modelled here show potential to deliver an environmentally sustainable lignocellulosic biorefinery industry and accelerate advanced biofuel penetration in the transport sector.

Comparison of Overall Resource Consumption of Biosolids Management System Processes Using Exergetic Life Cycle Assessment

This study focused on the evaluation of biosolids management systems (BMS) from a natural resource consumption point of view. Additionally, the environmental impact of the facilities was benchmarked using Life Cycle Assessment (LCA) to provide a comprehensive assessment. This is the first study to apply a Cumulative Exergy Extraction from the Natural Environment (CEENE) method for an in-depth resource use assessment of BMS where two full-scale BMS and seven system variations were analyzed. CEENE allows better system evaluation and understanding of how much benefit is achievable from the products generated by BMS, which have valorization potential. LCA results showed that environmental burden is mostly from the intense electricity consumption. The CEENE analysis further revealed that the environmental burden is due to the high consumption of fossil and nuclear-based natural resources. Using Cumulative Degree of Perfection, higher resource-use efficiency, 53%, was observed in the PTA-2 where alkaline stabilization rather than anaerobic digestion is employed. However, an anaerobic digestion process is favorable over alkaline stabilization, with 35% lower overall natural resource use. The most significant reduction of the resource footprint occurred when the output biogas was valorized in a combined heat and power system.

Life Cycle Thinking, Measurement and Management for Food System Sustainability

Food systems critically contribute to our collective sustainability outcomes. Improving food system sustainability requires life cycle thinking, measurement and management strategies. This article reviews the status quo and future prospects for bringing life cycle approaches to food system sustainability to the fore.