Overview of technologies for removal of methyl tert-butyl ether (MTBE) from water

Research Progress in Epoxidation of Light Small-Molecule Olefins

Light olefins, as important bulk raw materials in the petrochemical industry, play an irreplaceable role in the development of the manufacturing industry and the economy. The epoxides of light olefins are important intermediates for the synthesis of polymers, drugs, and fine chemicals, and their green, efficient, and safe synthesis has attracted much attention. This review focuses on the research progress of light olefin epoxidation and elucidates traditional epoxidation methods, such as the chlorohydrin method. Although these processes have mature processes, they have drawbacks, including equipment corrosion, environmental pollution, poor safety, and high waste emissions. Special emphasis is placed on catalytic epoxidation systems using oxygen or organic peroxides as oxygen sources. For homogeneous catalytic systems, certain metal complexes exhibit high activity and selectivity yet are difficult to separate and recycle. Moreover, heterogeneous catalytic systems have become a research hotspot due to their advantages of easy separation and reusability, with supported metal catalysts being a prime example. Meanwhile, the effects of reaction temperature, pressure, solvent, etc., on epoxidation are explored. The specific reaction mechanisms are also studied and analyzed. Current research challenges, including enhancing catalyst stability and reducing costs, are summarized. In the future, developing highly efficient, green, and economically viable epoxidation technologies for large-scale industrial applications represents an important research direction in this field.

Removal of MTBE and BTEX Pollutants from Contaminated Water Using Colloidal Activated Carbon (CAC)

Methyl tertiary-butyl ether (MTBE) and BTEX (benzene, toluene, ethylbenzene, and xylenes) are common groundwater contaminants that pose significant health risks. This study investigated the efficiency of a colloidal activated carbon (CAC) material in removing MTBE and BTEX from contaminated water using batch and continuous core flooding systems. In the batch system, a mixture of sand and carbonate was coated with 1-3 g of CAC for the removal of contaminants. The core flooding system was packed with similar materials and mixed with 10 g of CAC. X-ray diffraction (XRD) revealed that the carbonate consists of more than 97% calcite, with traces of clay and quartz minerals. On the other hand, the sandstone sample showed around 89% quartz, 8% clay minerals, and traces of feldspar. The CAC has a surface area of 1050 m2/g, mean particle size of 31.8 μm, density of 1.0976 (g/cm3), viscosity of 24.4 mPa·s, and a negative surface charge. Spiked water samples with 2000 ppb MTBE and BTEX concentrations ranging between 1000 and 200 ppb were injected through the system at rates of 0.5 and 1.0 mL/min. The results showed that the type of packing materials and flow rate have a significant impact on contaminant removal. For example, the removal efficiency was higher in sandstone due to uniform particle shapes facilitating better water distribution and CAC accessibility within the pore medium. A lower injection rate (0.5 mL/min) resulted in higher removal efficiencies due to increased contact time between contaminants and CAC. At 1 mL/min, the maximum removal of 94% and 65% for MTBE and benzene was achieved in carbonate, while 99% and 96% were achieved in sandstone, respectively. At 0.5 mL/min, complete MTBE removal and over 95% benzene removal were achieved in both materials. Overall, the CAC demonstrated excellent MTBE and BTEX removal capabilities, exceeding 95%, offering a promising approach for in situ groundwater remediation.

Rapid screening of volatile chemicals in surface water samples from the East Palestine, Ohio chemical disaster site with proton transfer reaction mass spectrometry

The increasing prevalence of hazardous chemical incidents in the United States necessitates the implementation of analytically robust, rapid, and reliable screening techniques for toxicant mixture analysis to understand short- and long-term health impacts of environmental exposures. A recent chemical disaster in East Palestine, Ohio has underscored the importance of thorough contamination assessment. On February 03, 2023, a Norfolk Southern train derailment prompted a chemical spill and fires. An open burn involving over 100,000 gal of vinyl chloride was conducted three days later. Hazardous compounds were released into air, water, and soil. To provide time-sensitive exposure data for emergency response, this study outlines a novel methodology for rapid characterization of chemical contamination of environmental media to support disaster response efforts. A controlled static headspace sampling system, in conjunction with a high-resolution proton transfer reaction time-of-flight mass spectrometer (PTR-TOF-MS), was developed to characterize volatile organic compounds (VOCs) in surface water samples collected near the East Palestine train derailment site. Spatial variations were observed in the chemical composition of surface water samples collected at different locations. Hydrocarbons were found to be the most abundant chemical group of all surface water samples, contributing 50 % to 97 % to the total headspace VOC mass. Compounds commonly detected in surface water samples, including benzene, styrene, xylene, and methyl tert-butyl ether (MTBE) were also observed in most surface water samples, with aqueous concentrations typically at ng/L levels. This study demonstrated the potential of the proposed methodology to be applied for rapid field screening of volatile chemicals in water samples in order to enable fast emergency response to chemical disasters and environmental hazards.

Effective and selective adsorption of methyl tert-butyl ether on ZSM-5 zeolite: a comparative study

The extensive use of methyl tert-butyl ether (MTBE) as a gasoline additive has caused serious environmental problems that need to be addressed urgently. The feasibility of remediation of MTBE-contaminated groundwater by ZSM-5 zeolite with SiO2/Al2O3 ratio of 50/130/360 was explored. The SiO2/Al2O3 ratio had a great influence on the physicochemical properties and structure, as well as the adsorption and mass transfer of MTBE on ZSM-5. The adsorption of MTBE on zeolites with SiO2/Al2O3 ratios of 50 and 130/360 followed the Langmuir and Freundlich models, respectively, and was controlled by different mass transfer processes. The morphology and adsorption capacity of ZSM-5 (50) and ZSM-5 (130) differed significantly, while the differences between ZSM5-(130) and ZSM-5 (360) were less pronounced. ZSM-5 (360) had higher adsorption capacity and adsorption efficiency for MTBE, and the larger BET surface area, pore volume and stronger hydrophobicity were the key factors to promote MTBE adsorption. Compared to activated carbon (AC), ZSM-5 (360) was more effective for MTBE removal at low concentrations (≤200 mg·L-1) and had the advantage of selective adsorption of MTBE with the addition of BTEX. In column adsorption, decreasing the concentration had opposite effects on MTBE removal by ZSM-5 and AC. At 5-10 mg·L-1, ZSM-5 (360) column reduced effluent concentration and improved bed utilization and removal efficiency.

A green analytical method for the simultaneous determination of 17 perfluoroalkyl substances (PFAS) in human serum and semen by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS)

The ubiquity of perfluoroalkyl substances has raised concerns about the unintended consequences of PFAS exposure on human health. In the present study, an eco-friendly ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed for the simultaneous determination of 17 PFAS in human serum and semen samples. QuEChERS salts MgSO4:NaCl 4:1 (w/w) were used for the extraction. The separation of analytes was performed on an ACQUITY BEH C18 column (100 × 2.1 mm, 1.7 μm), using water:methanol 95:5 and methanol as mobile phases A and B, respectively, both containing 2 mM ammonium acetate. Multiple reaction monitoring (MRM) in negative ion mode was used, selecting two transitions for each analyte, except for perfluorobutanoic acid (PFBA) and perfluoropentanoic acid (PFPeA). The analytical method was validated according to the Organization of Scientific Area Committees (OSAC) for Forensic Sciences guidelines and AGREE approach software was used to evaluate the greenness of the method. The developed procedure was applied to the analysis of 10 paired human serum and semen samples, proving the suitability in high throughput laboratories due to the easy preparation and the reduced volume of toxic solvents. Moreover, it allows to perform further investigation on the correlation between serum and semen PFAS concentration, focusing on male reproductive system correlated pathologies, such as male infertility.

Human exposure to formaldehyde and health risk assessment: a 46-year systematic literature review

After confirming that formaldehyde (FA) is carcinogenic, many studies were conducted in different countries to investigate this finding. Therefore, according to the dispersion of related studies, a bibliometric review of the current literature was performed with the aim of better understanding the exposure to FA and the resulting health risk, for the first time, using the Scopus database and the two open-source software packages, Bibliometrix R package. After screening the documents in Excel, the data was analyzed based on three aspects including performance analysis, conceptual structure, and intellectual structure, and the results were presented in tables and diagrams. A total of 468 documents were analyzed over period 1977-2023, in which 1956 authors from 56 countries participated. The number of scientific publications has grown significantly from 1977 (n = 1) to 2022 (n = 19). Zhang Y., from the Yale School of Public Health (USA), was identified as the most impactful author in this field. The Science of the Total Environment journal was identified as the main source of articles related to exposure to formaldehyde by publishing 25 studies. The United States and China were the most active countries with the most international collaboration. The main topics investigated during these 46 years included "formaldehyde" and "health risk assessment", which have taken new directions in recent years with the emergence of the keyword "asthma". The present study provides a comprehensive view of the growth and evolution of studies related to formaldehyde and the resulting health risks, which can provide a better understanding of existing research gaps and new and emerging issues.

Rotational spectroscopy of methyl tert-butyl ether with a new Ka band chirped-pulse Fourier transform microwave spectrometer

Chirped-pulse Fourier transform microwave (CP-FTMW) spectroscopy is a powerful tool for performing broadband gas-phase rotational spectroscopy, and its applications include discovery of new molecules, complex mixture analysis, and exploration of fundamental molecular physics. Here we report the development of a new Ka band (26.5-40 GHz) CP-FTMW spectrometer that is equipped with a pulsed supersonic expansion source and a heated reservoir for low-volatility samples. The spectrometer is built around a 150 W traveling wave tube amplifier and has an instantaneous bandwidth that covers the entire Ka band spectral range. To test the performance of the spectrometer, the rotational spectrum of methyl tert-butyl ether (MTBE), a former gasoline additive and environmental pollutant, has been measured for the first time in this spectral range. Over 1000 spectroscopic transitions have been measured and assigned to the vibrational ground state and a newly-identified torsionally excited state; all transitions were fit using the XIAM program to a root-mean-square deviation of 22 kHz. The spectrum displays internal rotation splitting, nominally forbidden transitions, and an intriguing axis-switching effect between the ground and torsionally excited state that is a consequence of MTBE's extreme near-prolate nature. Finally, the sensitivity of the spectrometer enabled detection of all singly-substituted 13C and 18O isotopologues in natural abundance. This set of isotopic spectra allowed for a partial r0 structure involving the heavy atoms to be derived, resolving a structural discrepancy in the literature between previous microwave and electron diffraction measurements.

Research Enhancing Acidic Mine Wastewater Purification: Innovations in Red Mud-Loess

This study investigates the adsorption of cadmium (Cd) by red mud-loess mixed materials and assesses the influence of quartz sand content on permeability. Shear tests are conducted using various pore solutions to analyze shear strength parameters. The research validates solidification methods for cadmium-contaminated soils and utilizes SEM-EDS, FTIR, and XRD analysis to elucidate remediation mechanisms. The findings suggest that the quartz sand content crucially affects the permeability of fine-grained red mud-loess mixtures. The optimal proportion of quartz sand is over 80%, significantly enhancing permeability, reaching a coefficient of 6.7 × 10-4 cm/s. Insufficient quartz sand content of less than 80% fails to meet the barrier permeability standards, leading to a reduced service life of the engineered barrier. Adsorption tests were conducted using various pore solutions, including distilled water, acidic solutions, and solutions containing Cd, to evaluate the adsorption capacity and shear characteristics of the red mud-loess mixture. Additionally, the study examines the behavior of Cd-loaded red mud-loess mixtures in various pore solutions, revealing strain-hardening trends and alterations in cohesiveness and internal friction angle with increasing Cd concentrations. The analysis of cement-red mud-loess-solidified soil demonstrates enhancements in soil structure and strength over time, attributed to the formation of crystalline structures and mineral formations induced by the curing agent. These findings provide valuable insights into the remediation of cadmium-contaminated soils.

The toxicity effects of the individual and combined exposure of methyl tert-butyl ether (MTBE) and tire rubber powder (RP) on Nile tilapia fish (Oreochromis niloticus)

Methyl tert-butyl ether (MTBE) is soluble in water and can contaminate water sources when it spills during transportation or leaks from underground storage tanks. Incomplete combustion releases MTBE as exhaust fumes that can be deposited on urban surfaces. Meanwhile, car tires erosion emits of large amounts of rubber dust (RP), easily transported to water bodies. Therefore, this study has the objective of assessing the toxicity of varying concentrations of MTBE (0, 2.5, 5.0 μL L-1) and RP (0, 5.0, 10.0 mg L-1 RP), both individually and in combination, over a period of 28 days on Nile tilapia (Oreochromis niloticus). MTBE and PR decreased fish growth performance. Blood biochemical analytes indicated that MTBE and RP led to increasing Aspartate aminotransferase (AST), alanine aminotransferase (ALT), lactate dehydrogenase (LDH), and creatinine phosphokinase (CPK), alkaline phosphatase and gamma-glutamyl transferase (GGT) activities. Alterations related to glucose, triglycerides, cholesterol, and creatinine, plasma contents, were also observed. Increased antioxidant biomarkers, including superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx), glutathione reductase (GR), and malondialdehyde (MDA), was observed. Exposure fish to MTBE and PR changed metabolic profile of muscle tissue. Moreover, results showed that MTBE, its metabolites, and PR could accumulate in the muscle tissue of fish. Results suggest that MTBE and RP can impact fish health, both individually and when combined. The presence of MTBE enhances the toxicity of RP, indicating a synergistic effect. Nevertheless, further studies are needed to understand the impact of toxic compounds on aquatic environments and organisms' health.

Polydimethylsiloxane (PDMS) Membrane for Separation of Soluble Toluene by Pervaporation Process

A commercial polydimethylsiloxane (PDMS) membrane was employed to separate the soluble toluene compounds (C₇H₈) from an aqueous solution via the pervaporation (PV) process. The performance and the efficacy of the PDMS PV membrane were evaluated through the estimation of the permeation flux and separation factor under various operating parameters. The response surface method (RSM) built in the Minitab-18 software was used for the design of the experiment in this study, and the responses of the permeation flux and the separation factor were analyzed and optimized based on the operating conditions. A nonlinear regression analysis was applied to the experimental output and input, and as a result, a quadratic equation model with parameters interactions was obtained as mathematical expressions to predict the permeation flux and separation factor. At the optimal conditions of temperature 30 °C, initial toluene concentration 500 ppm, and feed flowrate 3.5 L/min, the toluene permeation flux and separation factor were 125.855 g/m²·h and 1080, respectively. The feed concentration was the most impactful and significant in the improvement of the permeation flux and separation factor of the PDMS membrane.

Simultaneous removal of Pb and MTBE by mixed zeolites in fixed-bed column tests

The co-contamination of metals and organic pollutants, such as Pb and methyl tert-butyl ether (MTBE), in groundwater, has become a common and major phenomenon in many contaminated sites. This study evaluated the feasibility of their simultaneous removal with permeable reactive barrier (PRB) packed with mixed zeolites (clinoptilolite and ZSM-5) using fixed-bed column tests and breakthrough curve modeling. The effect of grain size on the permeability of PRB and removal efficacy was also assessed by granular and power clinoptilolite. The replacement of granular clinoptilolite by powder clinoptilolite largely reduced the breakthrough time but increased the saturation time nearly fourfold. The column adsorption capacity of clinoptilolite powders almost tripled that of clinoptilolite granules (130.6 mg/g versus 45.3 mg/g) due to higher specific surface areas. The minimum thickness and corresponding longevity of PRB were calculated as 7.12 cm and 321.5 min when 5% of granular clinoptilolite was mixed with 5% ZSM-5 and 90% sand as mixed PRB reactive media compared with 10.86 cm and 1230.2 min for the application of powder clinoptilolite. This study is expected to provide theoretical support and guidance for the practical application of mixed adsorbents in PRBs.

Removal of benzene, MTBE and toluene from contaminated waters using biochar-based liquid activated carbon

Fuel components such as benzene, toluene, and methyl tertiary-butyl ether (MTBE) are frequently detected pollutants in groundwater resources. Ex-situ remediation technologies by activated carbon have been used for treatment for many years. However, due to high cost of these technology, more attention has been given to the in-situ remediation methods of contaminated groundwaters using liquid carbon adsorbents. Literature search showed limited studies on using adsorbents in liquid form for the removal of such contaminants. Therefore, this lab-scale study investigates the capacity of using raw biochar-based liquid activated carbon and iron-modified biochar-based liquid activated carbon to remove these pollutants. The adsorption efficiency of the synthesized liquid activated carbon and iron-modified liquid activated carbon mixed with sand, limestone, and 1:1 mixture of sand/limestone, was tested using batch suspension experiments. Adsorption by granular activated carbon was also investigated for comparison with liquid activated carbon. Results of the study revealed that mixing of liquid activated carbon or LAC-Fe on subsurface materials had not improved the removal efficiency of MTBE. At the same time, it showed a slight improvement in the adsorption efficiency of benzene and toluene. In all cases, the removal by GAC was higher with around 80% and 90% for MTBE and BT, respectively. Results also showed that benzene and toluene were better removed by liquid activated carbon and iron-modified liquid activated carbon (∼ 40%) than MTBE (∼ 20%). It is also found that water chemistry (i.e., salinity and pH) had insignificant effects on the removal efficiency of pollutants under the study conditions. It can be concluded that more research is needed to improve the capacity of biochar-based liquid-activated carbon in removing MTBE, benzene and toluene compounds that will lead to improve the utilization of liquid activated carbon for the in-situ remediation of contaminated groundwaters.

Separation of Soluble Benzene from an Aqueous Solution by Pervaporation Using a Commercial Polydimethylsiloxane Membrane

A developed polydimethylsiloxane (PDMS) membrane was used to separate soluble benzene compounds (C₆H₆) from an aqueous solution via a pervaporation (PV) process. This membrane was characterized by scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, contact angle (CA), and energy-dispersive spectroscopy (EDS). To evaluate the performance of the membrane, the separation factor and permeation flux were estimated in various operating conditions, including the feed temperature, initial benzene concentration, and feed flow rate. The experiments to maximize the separation factor and permeation flux were designed using the response surface method (RSM) that is built into Minitab 18. A quadratic model (nonlinear regression equation) was suggested to obtain mathematical expressions to predict the benzene permeation flux and the separation factor according to the effect of the parameters' interaction. The optimization of the PV was performed using an RSM that was based on the analysis of variance (ANOVA). The optimal values of the benzene permeation flux and separation factor were 6.7 g/m²·h and 39.8, respectively, at the optimal conditions of temperature (30 °C), initial concentration of benzene (1000 ppm), and feed flow rate (3.5 L/min). It was found that the feed concentration was the most influential parameter, leading to a significant increase in the permeation flux and separation factor of the PDMS membrane.

A Survey of Gasoline Ameliorator, Methyl-Tert-Butyl Ether (MTBE) on Bovine Serum Albumin: A Spectroscopy and Molecular Dynamic Simulation Study

Background

Methyl-Tert-Butyl Ether (MTBE) as a gasoline modifier is frequently added to fuels and used in plenty of worldwide applications. MTBE biodegradation in groundwater occurs slowly and produces water miscibility; therefore, it causes diverse environmental and human health concerns.

Objectives

The interaction of MTBE with bovine serum albumin (BSA) as a model protein at physiological conditions is investigated to illustrate the possible interactions of MTBE with the body's proteins.

Materials and Methods

Uv-visible, fluorescence, circular dichroism (CD) spectroscopy methods, and molecular modeling were used to analyze the MTBE's effect on BSA structure and dynamics. The constant protein concentration and various MTBE contents were used for possible interactions.

Results

The protein structural analysis shows that MTBE binds to BSA via positive enthalpy and entropy via hydrophobic interactions. Molecular docking shows the participation of several amino acids in the MTBE-BSA interaction. The CD spectroscopy results show that the BSA structure was not changed in the MTBE concentrations utilized in the study. Molecular dynamics (MD) simulation results suggest that MTBE can slightly change protein structure in the last 50ns.

Conclusion

Comparing experimental and MD simulation results demonstrated that the BSA secondary structure was maintained in the low concentration of the MTBE. The entropy and enthalpy parameters asserted the hydrophobic interaction was the major force in the interaction between the BSA and MTBE.

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles and their derivatives. Nanosilica possesses unique properties, including low toxicity, chemical inertness, and excellent biocompatibility, and can be developed from a variety of sustainable precursor materials. Herein, we provide an account of the recent advances in the synthesis and utilization of nanosilica for wastewater treatment. This review covers key physicochemical aspects of several nanosilica materials and a variety of nanotechnology-enabled wastewater treatment techniques such as adsorption, separation membranes, and antimicrobial applications. It also discusses the prospective design and tuning options for nanosilica production, such as size control, morphological tuning, and surface functionalization. Informative discussions on nanosilica production from agricultural wastes have been offered, with a focus on the synthesis methodologies and pretreatment requirements for biomass precursors. The characterization of the different physicochemical features of nanosilica materials using critical surface analysis methods is discussed. Bio-hybrid nanosilica materials have also been highlighted to emphasize the critical relevance of environmental sustainability in wastewater treatment. To guarantee the thoroughness of the review, insights into nanosilica regeneration and reuse are provided. Overall, it is envisaged that this work's insights and views will inspire unique and efficient nanosilica material design and development with robust properties for water and wastewater treatment applications.

Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

A review on treatment of petroleum refinery and petrochemical plant wastewater: A special emphasis on constructed wetlands

Petroleum refinery and petrochemical plants (PRPP) are one of the major contributors to toxic and recalcitrant organic polluted water, which has become a significant concern in the field of environmental engineering. Several contaminants of PRPP wastewater are genotoxic, phytotoxic, and carcinogenic, thereby imposing detrimental effects on the environment. Many biological processes were able to achieve chemical oxygen demand (COD) removal ranging from 60% to 90%, and their retention time usually ranged from 10 to 100 days. These methods were not efficient in removing the petroleum hydrocarbons present in PRPP wastewater and produced a significant amount of oily sludge. Advanced oxidation processes achieved the same COD removal efficiency in a few hours and were able to break down recalcitrant organic compounds. However, the associated high cost is a significant drawback concerning PRPP wastewater treatment. In this context, constructed wetlands (CWs) could effectively remove the recalcitrant organic fraction of the wastewater because of the various inherent mechanisms involved, such as phytodegradation, rhizofiltration, microbial degradation, sorption, etc. In this review, we found that CWs were efficient in handling large quantities of high strength PRPP wastewater exhibiting average COD removal of around 80%. Horizontal subsurface flow CWs exhibited better performance than the free surface and floating CWs. These systems could also effectively remove heavy oil and recalcitrant organic compounds, with an average removal efficiency exceeding 80% and 90%, respectively. Furthermore, modifications by varying the aeration system, purposeful hybridization, and identifying the suitable substrate led to the enhanced performance of the systems.

Intramolecular isotope effects during permanganate oxidation and acid hydrolysis of methyl tert-butyl ether

Stable isotopes have been widely used to monitor remediation of environmental contaminants over the last decades. This approach gives a good mechanistic description of natural or assisted degradation of organic pollutants, such as methyl tert-butyl ether (MTBE). Since abiotic degradation seems to be the most promising assisted attenuation method, the isotopic fractionation associated with oxidation and hydrolysis processes need to be further investigated in order to understand better these processes and make their monitoring more efficient. In this study, position-specific isotope effects (PSIEs) associated with permanganate oxidation and acid hydrolysis of MTBE were determined using isotope ratio monitoring by ¹³C Nuclear Magnetic Resonance Spectrometry (irm-¹³C NMR) combined with isotope ratio monitoring by Mass Spectrometry (irm-MS). The use of this Position-Specific Isotopic Analysis (PSIA) method makes it possible to observe a specific normal isotope effect (IE) associated with each of these two abiotic degradation mechanisms. The present work demonstrates that the ¹³C isotope pattern of the main degradation product, tert-butyl alcohol (TBA), depends on the chemical reaction by which it is produced. Furthermore, this study also demonstrates that PSIA at natural abundance can give new insights into reaction mechanisms and that this methodology is very promising for the future of modeling the remediation of organic contaminants.

High Selective Composite Polyalkylmethylsiloxane Membranes for Pervaporative Removal of MTBE from Water: Effect of Polymer Side-chain

For the first time, the effect of the side-chain in polyalkylmethylsiloxane towards pervaporative removal of methyl tert-butyl ether (MTBE) from water was studied. The noticeable enhancement of separation factor during the pervaporation of 1 wt.% MTBE solution in water through the dense film (40–50 µm) can be achieved by substitution of a methyl group (separation factor 111) for heptyl (161), octyl (169) or decyl (180) one in polyalkylmethylsiloxane. Composite membrane with the selective layer (~8 µm) made of polydecylmethylsiloxane (M10) on top of microfiltration support (MFFK membrane) demonstrated MTBE/water separation factor of 310, which was 72% greater than for the dense film (180). A high separation factor together with an overall flux of 0.82 kg·m⁻²·h⁻¹ allowed this M10/MFFK composite membrane to outperform the commercial composite membranes. The analysis of the concentration polarization modulus and the boundary layer thickness revealed that the feed flow velocity should be gradually increased from 5 cm·s⁻¹ for an initial solution (1 wt.% of MTBE in water) to 13 cm·s⁻¹ for a depleted solution (0.2 wt.% of MTBE in water) to overcome the concentration polarization phenomena in case of composite membrane M10/MFFK (T_exp = 50 °C).

Removal and Recovery of Methyl Tertiary Butyl Ether (MTBE) from Water Using Carbon Nanotube and Graphene Oxide Immobilized Membranes

Methyl tert-butyl ether (MTBE) is a widely used gasoline additive that has high water solubility, and is difficult to separate from contaminated ground and surface waters. We present the development in functionalized carbon nanotube-immobilized membranes (CNIM-f) and graphene oxide-immobilized membranes (GOIM) for enhanced separation of MTBE via sweep gas membrane distillation (SGMD). Both types of modified membranes demonstrated high performance in MTBE removal from its aqueous mixture. Among the membranes studied, CNIM-f provided the best performance in terms of flux, removal efficiency, mass transfer coefficients and overall selectivity. The immobilization f-CNTs and GO altered the surface characteristics of the membrane and enhanced partition coefficients, and thus assisted MTBE transport across the membrane. The MTBE flux reached as high as 1.4 kg/m² h with f-CNTs, which was 22% higher than that of the unmodified PTFE membrane. The maximum MTBE removal using CNIM-f reached 56% at 0.5 wt % of the MTBE in water, and at a temperature of 30 °C. With selectivity as high as 60, MTBE recovery from contaminated water is very viable using these nanocarbon-immobilized membranes.

Metabolites of a Drechslera sp. endophyte with potential as biocontrol and bioremediation agent

Endophytic fungi have several well-established beneficial effects on plant health and growth, and are a huge source of bioactive compounds. The endophyte Drechslera sp. strain 678, isolated from the roots of an Australian native grass Neurachne alopecuroidea, demonstrated efficacy against four plant pathogens (Pythium ultimum, Rhizoctonia solani, Botrytis cinerea, Alternaria alternata). In addition, strain 678 was capable of degrading a common additive used in gasoline, known as methyl tertiary-butyl ether (MtBE). Thus, the organic extracts obtained from the culture filtrate of strain 678 were studied. Metabolomic analysis revealed the presence of two major bioactive metabolites, monocerin and an alkynyl substituted epoxycyclohexenone derivative, which showed good antifungal activity. The Drechslera sp. strain 678 and its compounds show promise for applications in biocontrol and bioremediation activities in agriculture or as a remediation option for MtBE contamination in soil.

Methyl t-butyl ether-degrading bacteria for bioremediation and biocontrol purposes

A total of fifteen potential methyl t-butyl ether (MtBE)-degrading bacterial strains were isolated from contaminated soil. They have been identified as belonging to the genera Bacillus, Pseudomonas, Kocuria, Janibacter, Starkeya, Bosea, Mycolicibacterium, and Rhodovarius. Bacillus aryabhattai R1B, S. novella R8b, and M. mucogenicum R8i were able to grow using MtBE as carbon source, exhibiting different growth behavior and contaminant degradation ability. Their biocontrol ability was tested against various fungal pathogens. Both S. novella R8b and B. aryabhattai were effective in reducing the development of necrotic areas on leaves within 48 hours from Botritys cinerea and Alternaria alternata inoculation. Whereas, M. mucogenicum effectively controlled B. cinerea after 72 hours. Similar results were achieved using Pythium ultimum, in which the application of isolated bacteria increased seed germination. Only M. mucogenicum elicited tomato plants resistance against B. cinerea. This is the first report describing the occurrence of bioremediation and biocontrol activities in M. mucogenicum, B. aryabhattai and S. novella species. The production of maculosin and its antibiotic activity against Rhizoctonia solani has been reported for first time from S. novella. Our results highlight the importance of multidisciplinary approaches to achieve a consistent selection of bacterial strains useful for plant protection and bioremediation purposes.

Chromium-Based Polypyrrole/MIL-101 Nanocomposite as an Effective Sorbent for Headspace Microextraction of Methyl tert-Butyl Ether in Soil Samples

The performance of headspace solid-phase microextraction (HS-SPME) was upgraded by easy and low-cost preparation of a new nanocomposite fiber. A polypyrrole/chromium-based metal–organic framework, PPy@MIL-101(Cr), nanocomposite was electrochemically synthesized and simultaneously coated on a steel wire as a microextraction sorbent. The morphology and chemical structure of the prepared nanocomposite was characterized by Fourier-transform infrared spectrometry (FT-IR), scanning electron microscopy (SEM), and energy dispersive X-ray analysis (EDX) techniques. The microsorbent was used for sampling of methyl-tert-butyl ether (MTBE) in solid samples, through an HS-SPME sampling strategy, followed by GC-FID measurement. The optimal experimental conditions, including extraction temperature, extraction time, and GC desorption conditions, were evaluated and optimized. The proposed procedure showed good sensitivity (limit of detection was 0.01 ng·g⁻¹) and precision (relative standard deviation was 8.4% for six replicated analyses). The calibration curve was linear over the range of 5–40,000 ng·g⁻¹, with a correlation coefficient of 0.994. The limit of quantification was 0.4 ng·g⁻¹. The fabricated fiber exhibited good repeatability and reproducibility for the sampling of MTBE, with average recovery values of 88–114%. The intra-fiber and inter-fiber precisions were found to be 8.4% and 19%, respectively. The results demonstrated the superiority of the PPy@MIL-101(Cr)-coated fiber in comparison with handmade (polypyrrole, PPY) and commercial fibers (polyacrylate, PA; polydimethylsiloxane, PDMS; and divinylbenzene/carboxen/polydimethylsiloxane, DVB/CAR/PDMS) for the analysis of solid samples. The developed method was successfully employed for the analysis of MTBE in different soil samples contaminated by oil products.

Bioremediation of gaseous methyl tert-butyl ether by combination of sulfuric acid modified bagasse activated carbon-bone biochar beads and Acinetobacter indicus screened from petroleum contaminated soil

Combination of sulfuric acid modified bagasse activated carbon-bone biochar beads and Acinetobacter indicus screened from petroleum contaminated soil was the best condition for gaseous methyl tert-butyl ether (MTBE) removal. It was found that H₂SO₄ modified bagasse AC in powder form had higher adsorption capacity (989.33 mg g^-1) than that in bead form (1.94 mg g^-1). In addition, bone biochar in powder form (3.51 mg g^-1) also had higher adsorption capacity than that in bead form (1.63 mg g^-1). This was the fact that material beads contained high moisture content that inhibited the penetration of gaseous MTBE into the material. And a mixed material of H₂SO₄ modified bagasse AC-bone biochar beads had the highest adsorption capacity (2.22 mg g^-1) compared to individual H₂SO₄ modified bagasse AC beads (1.94 mg g^-1) and bone biochar beads (1.63 mg g^-1) due to a mixed material had more rough surface and high surface area on its material. So, gaseous MTBE can penetrate through this material more easily. Although the maximum adsorption capacity of H₂SO₄ modified bagasse AC in powder form was the highest but microorganism cannot sustain and survive in this form for a long time. Therefore, the material beads were more suitable for microorganism to grow and degrade gaseous MTBE. Microorganism can degrade MTBE and caused no secondary wastes. Moreover, A. indicus was a novel strain for MTBE removal that has not been previously reported. Therefore, a combination of A. indicus-mixed material beads was a good choice for MTBE removal in a biofilter system.

Photocatalytic Oxidation of Methyl Tert-Butyl Ether in Presence of Various Phase Compositions of TiO2

MTBE (methyl tert-butyl ether) represents a rising threat to the environment, especially drinking water, and its effective removal (with all by-products) is necessary. Even a very low concentration of MTBE makes the water undrinkable; therefore, an effective treatment has to be developed. This work is focused on MTBE photocatalytic oxidation in presence of various TiO2 photocatalysts with different phase composition prepared by different methods. It was confirmed the phase composition of TiO2 had the most significant influence on the photocatalytic degradation of MTBE. The rutile phase more easily reduces adsorbed oxygen by photogenerated electrons to superoxide radical, supporting separation of charge carriers. The presence and concentrations of by-products have to be taken into account as well. The conversion of total organic carbon (TOC) was used for the comparison, 40% of TOC was removed after 1 h of irradiation in presence of TiO2–ISOP–C/800 photocatalyst composed of anatase and rutile phase.

The Fate of MTBE and BTEX in Constructed Wetlands

Hydrocarbon contamination of water resources is a global issue. These compounds are generated and discharged into the environment in industrial areas from chemical and petrochemical plants, oil refineries, power plants, and so forth. Fuel hydrocarbons, namely, BTEX (benzene, toluene, ethylbenzene, and xylenes) and MTBE (methyl tert-butyl ether), are commonly found in groundwater, posing environmental and health risks to humans and ecosystems. Nature-based technologies represent an alternative solution, providing high efficiency, an environmentally friendly character, simple operation, and cost efficiency, which are characteristics particularly desired by the international petroleum industry. This article discusses the use of the green technology of constructed wetlands to remediate water polluted with hydrocarbons. Although the number of related international experiences and studies is limited, the article presents the latest developments of wetland technology for the removal of MTBE and benzene-BTEX. The discussion includes the overall efficiency of the different wetland types that have been tested and used, the main transformation and removal processes that regulate the fate of BTEX and MTBE in constructed wetlands, and the potential for future investigations.

VUV/Fe(II)/H2O2 as a novel integrated process for advanced oxidation of methyl tert-butyl ether (MTBE) in water at neutral pH: Process intensification and mechanistic aspects

Vacuum UV (VUV) technologies have recently attracted high interest due to their high efficacy in generating reactive oxygen species (ROS). To date, no systematic study of the modes of action of the integrated VUV/Fe(II)/H₂O₂ process against contaminants elimination exists; the present study reports the oxidation of MTBE in a new light-assisted Fenton-process, by employing either narrowband UVC (254 nm) or VUV (185 and 254 nm) irradiation, in a comparative evaluation. The processes under investigation were the UVC- or VUV/Fe(II)/H₂O₂ sensitized ones and their constituents, i.e. Fe(II)/H₂O₂, VUV, VUV/Fe(II), VUV/H₂O₂, VUV/Fe(II)/H₂O₂, as well as the UVC, UVC/H₂O₂ and UVC/Fe(II)/H₂O₂. We scrutinize the operational parameters of the VUV-assisted process, its enhancements and synergies, comparison with the UVC-based ones, as well as their inflicted pathways towards MTBE degradation. Complete degradation and 87.8% mineralization of 50 mg/L MTBE was achieved in the VUV/Fe(II)/H₂O₂ process (0.9 mM Fe(II) and 3 mM H₂O₂), at near-neutral pH (reaction times: ∼30 and 60 min, respectively). Irradiation with VUV light was found to act synergistically and in high kinetic rates enhancement compared to the UVC source, sensitizing the Fenton process for effective oxidation of MTBE in the aqueous solution. A scavenger study and degradation by-products investigation has been performed, leading to a mechanistic pathway proposition, elucidating MTBE degradation. The VUV/Fe(II)/H₂O₂ process demonstrated potential applicability in the field since it could efficiently treat (100% degradation and 86.4% mineralization) groundwater spiked with MTBE, operated either under batch or continuous-flow mode. The findings clearly indicates the VUV-assisted Fenton as an emerging and viable technology for field application to treat the MTBE-contaminated effluents or waters.

Adsorption of methyl tert-butyl ether (MTBE) onto ZSM-5 zeolite: Fixed-bed column tests, breakthrough curve modelling and regeneration

ZSM-5, as a hydrophobic zeolite, has a good adsorption capacity for methyl tert-butyl ether (MTBE) in batch adsorption studies. This study explores the applicability of ZSM-5 as a reactive material in permeable reactive barriers (PRBs) to decontaminate the MTBE-containing groundwater. A series of laboratory scale fixed-bed column tests were carried out to determine the breakthrough curves and evaluate the adsorption performance of ZSM-5 towards MTBE under different operational conditions, including bed length, flow rate, initial MTBE concentration and ZSM-5 dosage, and regeneration tests were carried out at 80, 150 and 300 °C for 24 h. Dose-Response model was found to best describe the breakthrough curves. MTBE was effectively removed by the fixed-bed column packed with a ZSM-5/sand mixture with an adsorption capacity of 31.85 mg g^-1 at 6 cm bed length, 1 mL min^-1 flow rate, 300 mg L^-1 initial MTBE concentration and 5% ZSM-5 dosage. The maximum adsorption capacity increased with the increase of bed length and the decrease of flow rate and MTBE concentration. The estimated kinetic parameters can be used to predict the dynamic behaviour of column systems. In addition, regeneration study shows that the adsorption capacity of ZSM-5 remains satisfactory (>85%) after up to four regeneration cycles.

Kinetic and equilibrium modelling of MTBE (methyl tert-butyl ether) adsorption on ZSM-5 zeolite: Batch and column studies

The intensive use of methyl tert-butyl ether (MTBE) as a gasoline additive has resulted in serious environmental problems due to its high solubility, volatility and recalcitrance. The feasibility of permeable reactive barriers (PRBs) with ZSM-5 type zeolite as a reactive medium was explored for MTBE contaminated groundwater remediation. Batch adsorption studies showed that the MTBE adsorption onto ZSM-5 follows the Langmuir model and obeys the pseudo-second-order model with an adsorption capacity of 53.55 mg g^-1. The adsorption process reached equilibrium within 24 h, and MTBE was barely desorbed with initial MTBE concentration of 300 mg L^-1. The mass transfer process is found to be primarily controlled by pore diffusion for MTBE concentrations from 100 to 600 mg L^-1. pH has little effect on the maximum adsorption capacity in the pH range of 2-10, while the presence of nickel reduces the capacity with Ni concentrations of 2.5-25 mg L^-1. In fixed-bed column tests, the Dose-Response model fits the breakthrough curve well, showing a saturation time of ∼320 min and a removal capacity of ∼18.71 mg g^-1 under the conditions of this study. Therefore, ZSM-5 is an extremely effective adsorbent for MTBE removal and has a huge potential to be used as a reactive medium in PRBs.

Biodegradation of Methyl Tertiary Butyl Ether (MTBE) by a Microbial Consortium in a Continuous Up-Flow Packed-Bed Biofilm Reactor: Kinetic Study, Metabolite Identification and Toxicity Bioassays

This study investigated the aerobic biodegradation of methyl tertiary-butyl ether (MTBE) by a microbial consortium in a continuous up-flow packed-bed biofilm reactor using tezontle stone particles as a supporting material for the biofilm. Although MTBE is toxic for microbial communities, the microbial consortium used here was able to resist MTBE loading rates up to 128.3 mg L^-1 h^-1, with removal efficiencies of MTBE and chemical oxygen demand (COD) higher than 90%. A linear relationship was observed between the MTBE loading rate and the MTBE removal rate, as well as between the COD loading rate and the COD removal rate, within the interval of MTBE loading rates from 11.98 to 183.71 mg L^-1 h^-1. The metabolic intermediate tertiary butyl alcohol (TBA) was not detected in the effluent during all reactor runs, and the intermediate 2-hydroxy butyric acid (2-HIBA) was only detected at MTBE loading rates higher than 128.3 mg L^-1 h^-1. The results of toxicity bioassays with organisms from two different trophic levels revealed that the toxicity of the influent was significantly reduced after treatment in the packed-bed reactor. The packed-bed reactor system used in this study was highly effective for the continuous biodegradation of MTBE and is therefore a promising alternative for detoxifying MTBE-laden wastewater and groundwater.

Analytical tools employed to determine pharmaceutical compounds in wastewaters after application of advanced oxidation processes

Today, the presence of contaminants in the environment is a topic of interest for society in general and for the scientific community in particular. A very large amount of different chemical substances reaches the environment after passing through wastewater treatment plants without being eliminated. This is due to the inefficiency of conventional removal processes and the lack of government regulations. The list of compounds entering treatment plants is gradually becoming longer and more varied because most of these compounds come from pharmaceuticals, hormones or personal care products, which are increasingly used by modern society. As a result of this increase in compound variety, to address these emerging pollutants, the development of new and more efficient removal technologies is needed. Different advanced oxidation processes (AOPs), especially photochemical AOPs, have been proposed as supplements to traditional treatments for the elimination of pollutants, showing significant advantages over the use of conventional methods alone. This work aims to review the analytical methodologies employed for the analysis of pharmaceutical compounds from wastewater in studies in which advanced oxidation processes are applied. Due to the low concentrations of these substances in wastewater, mass spectrometry detectors are usually chosen to meet the low detection limits and identification power required. Specifically, time-of-flight detectors are required to analyse the by-products.

Emerging trends in photodegradation of petrochemical wastes: a review

Various human activities like mining and extraction of mineral oils have been used for the modernization of society and well-beings. However, the by-products such as petrochemical wastes generated from such industries are carcinogenic and toxic, which had increased environmental pollution and risks to human health several folds. Various methods such as physical, chemical and biological methods have been used to degrade these pollutants from wastewater. Advance oxidation processes (AOPs) are evolving techniques for efficient sequestration of chemically stable and less biodegradable organic pollutants. In the present review, photocatalytic degradation of petrochemical wastes containing monoaromatic and poly-aromatic hydrocarbons has been studied using various heterogeneous photocatalysts (such as TiO₂, ZnO and CdS. The present article seeks to offer a scientific and technical overview of the current trend in the use of the photocatalyst for remediation and degradation of petrochemical waste depending upon the recent advances in photodegradation of petrochemical research using bibliometric analysis. We further outlined the effect of various heterogeneous catalysts and their ecotoxicity, various degradation pathways of petrochemical wastes, the key regulatory parameters and the reactors used. A critical analysis of the available literature revealed that TiO₂ is widely reported in the degradation processes along with other semiconductors/nanomaterials in visible and UV light irradiation. Further, various degradation studies have been carried out at laboratory scale in the presence of UV light. However, further elaborative research is needed for successful application of the laboratory scale techniques to pilot-scale operation and to develop environmental friendly catalysts which support the sustainable treatment technology with the "zero concept" of industrial wastewater. Nevertheless, there is a need to develop more effective methods which consume less energy and are more efficient in pilot scale for the demineralization of pollutant.

Hydrocarbon degrading microbial communities in bench scale aerobic biobarriers for gasoline contaminated groundwater treatment

BTEX compounds (benzene, toluene, ethylbenzene and xylenes) and methyl tert-butyl ether (MTBE) are some of the main constituents of gasoline and can be accidentally released in the environment. In this work the effect of bioaugmentation on the microbial communities in a bench scale aerobic biobarrier for gasoline contaminated water treatment was studied by 16S rRNA gene sequencing. Catabolic genes (tmoA and xylM) were quantified by qPCR, in order to estimate the biodegradation potential, and the abundance of total bacteria was estimated by the quantification of the number of copies of the 16S rRNA gene. Hydrocarbon concentration was monitored over time and no difference in the removal efficiency for the tested conditions was observed, either with or without the microbial inoculum. In the column without the inoculum the most abundant genera were Acidovorax, Bdellovibrio, Hydrogenophaga, Pseudoxanthomonas and Serpens at the beginning of the column, while at the end of the column Thauera became dominant. In the inoculated test the microbial inoculum, composed by Rhodococcus sp. CE461, Rhodococcus sp. CT451 and Methylibium petroleiphilum LMG 22953, was outcompeted. Quantitative PCR results showed an increasing in xylM copy number, indicating that hydrocarbon degrading bacteria were selected during the treatment, although only a low increase of the total biomass was observed. However, the bioaugmentation did not lead to an increase in the degradative potential of the microbial communities.

Comparative evaluation of adsorption kinetics of diclofenac and isoproturon by activated carbon

Adsorption mechanism of diclofenac and isoproturon onto activated carbon has been proposed using Langmuir and Freundlich isotherms. Adsorption capacity and optimum adsorption isotherms were predicted by nonlinear regression method. Different kinetic equations, pseudo-first-order, pseudo-second-order, intraparticle diffusion model and Bangham kinetic model, were applied to study the adsorption kinetics of emerging contaminants on activated carbon in two aqueous matrices.