Biodegradation and reversible inhibitory impact of sulfamethoxazole on the utilization of volatile fatty acids during anaerobic treatment of pharmaceutical industry wastewater

Responses of microbial interactions and functional genes to sulfamethoxazole in anammox consortia

Sulfamethoxazole (SMX) has been widely detected in various environments and its potential environmental risks have caused great concerns. However, the impact mechanism of SMX on microbial interactions among anammox consortia remain unknown. A long-term exposure experiments (140 d) was carried out to systematically examine the influence of SMX (0-1000 μg/L) on the anammox system, especially microbial network dynamics and variations of key metabolic genes. Results showed that anammox system could adapt to SMX below 500 μg/L and maintain a high nitrogen removal efficiency (NRE) of 85.35 ± 2.42%, while 1000 μg/L SMX significantly decreased the abundance of functional microbes and deteriorated denitrification performance with NRE dropped to 36.92 ± 15.01%. Co-occurrence network analysis indicated that 1000 μg/L SMX decreased the interactions between Proteobacteria and Chloroflexi and limited AnAOB from playing an important role as central nodes in the subnetwork of Planctomycetes. Metagenomics analysis found that genes associated with nitrogen removal (i.e., hdh, hzs, nirS, and hao) showed lower expression level after addition of SMX, while SMX-related ARGs (sul1 and sul2) increased by 1.22 and 2.68 times. This study provided us a relatively comprehensive perspective in response of microbial interactions and metabolic activity to various SMX concentrations.

Treatment of pharmaceutical wastewater through activated sludge process-a critical review

The occurrence of pharmaceutical compounds in water is a rising issue in the environment. These drugs in the waste may be toxic to aquatic organisms and humans as they disrupt the endocrine system, cause genotoxicity, etc. Several techniques were used for the treatment of pharmaceutical wastewater, such as physical, chemical, physiochemical, and biological processes like adsorption, chemical coagulation, and activated sludge processes, but these techniques possess several merits and demerits, such as higher installation and operation costs. This technique is used to remove color and turbidity; reduce biochemical oxygen demand (BOD), chemical oxygen demand (COD), and total suspended solids (TSS) to permissible limits for reuse of effluent; and prevent diseases caused by pharmaceutical wastewater. This review focuses on the treatment of pharmaceutical wastewater containing drugs like antibiotics, depressants, and hormones, with the activated sludge process having several advantages like good quality effluent and low installation costs.

The fate of sulfamethoxazole and trimethoprim in a micro-aerated anaerobic membrane bioreactor and the occurrence of antibiotic resistance in the permeate

This study investigates the effects, conversions, and resistance induction, following the addition of 150 μg·L-1 of two antibiotics, sulfamethoxazole (SMX) and trimethoprim (TMP), in a laboratory-scale micro-aerated anaerobic membrane bioreactor (MA-AnMBR). TMP and SMX were removed at 97 and 86%, indicating that micro-aeration did not hamper their removal. These antibiotics only affected the pH and biogas composition of the process, with a significant change in pH from 7.8 to 7.5, and a decrease in biogas methane content from 84 to 78%. TMP was rapidly adsorbed onto the sludge and subsequently degraded during the long solids retention time of 27 days. SMX adsorption was minimal, but the applied hydraulic retention time of 2.6 days was sufficiently long to biodegrade SMX. The levels of three antibiotic-resistant genes (ARGs) (sul1, sul2, and dfrA1) and one mobile genetic element biomarker (intI1) were analyzed by qPCR. Additions of the antibiotics increased the relative abundances of all ARGs and intI1 in the MA-AnMBR sludge, with the sul2 gene folding 15 times after 310 days of operation. The MA-AnMBR was able to reduce the concentration of antibiotic-resistant bacteria (ARB) in the permeate by 3 log.

Mechanistic insights into Fe3O4-modified biochar relieving inhibition from erythromycin on anaerobic digestion

Anaerobic digestion (AD) of antibiotic manufacturing wastewater to degrade residual antibiotics and produce mixture of combustible gases has been investigated actively in the past decades. However, detrimental effect of residual antibiotic to microbial activities is commonly faced in AD process, leading to the reduction of treatment efficiency and energy recovery. Herein, the present study systematically evaluated the detoxification effect and mechanism of Fe3O4-modified biochar in AD of erythromycin manufacturing wastewater. Results showed that Fe3O4-modified biochar had stimulatory effect on AD at 0.5 g/L erythromycin existence. A maximum methane yield of 327.7 ± 8.0 mL/g COD was achieved at 3.0 g/L Fe3O4-modified biochar, leading to the increase of 55.7% compared to control group. Mechanistic investigation demonstrated that different levels of Fe3O4-modified biochar could improve methane yield via different metabolic pathways involved in specific bacteria and archaea. Low levels of Fe3O4-modified biochar (i.e., 0.5-1.0 g/L) led to the enrichment of Methanothermobacter sp., strengthening the hydrogenotrophic pathway. On the contrary, high levels of Fe3O4-modified biochar (2.0-3.0 g/L) favored the proliferation of acetogens (e.g., Lentimicrobium sp.) and methanogen (Methanosarcina sp.) and their syntrophic relations played vital role on the simulated AD performance at erythromycin stress. Additionally, the addition of Fe3O4-modified biochar significantly decreased the abundance of representative antibiotic resistant genes (ARGs), benefiting the reduction of environmental risk. The results of this study verified that the application of Fe3O4-modified biochar could be an efficient approach to detoxify erythromycin on AD system, which brings high impacts and positive implications for biological antibiotic wastewater treatment.

Iron-modified biochar boosts anaerobic digestion of sulfamethoxazole pharmaceutical wastewater: Performance and microbial mechanism

The accumulation of volatile fatty acids (VFAs) caused by antibiotic inhibition significantly reduces the treatment efficiency of sulfamethoxazole (SMX) wastewater. Few studies have been conducted to study the VFAs gradient metabolism of extracellular respiratory bacteria (ERB) and hydrogenotrophic methanogen (HM) under high-concentration sulfonamide antibiotics (SAs). And the effects of iron-modified biochar on antibiotics are unknown. Here, the iron-modified biochar was added to an anaerobic baffled reactor (ABR) to intensify the anaerobic digestion of SMX pharmaceutical wastewater. The results demonstrated that ERB and HM were developed after adding iron-modified biochar, promoting the degradation of butyric, propionic and acetic acids. The content of VFAs reduced from 1166.0 mg L^-1 to 291.5 mg L^-1. Therefore, chemical oxygen demand (COD) and SMX removal efficiency were improved by 22.76% and 36.51%, and methane production was enhanced by 6.19 times. Furthermore, the antibiotic resistance genes (ARGs) such as sul1, sul2, intl1 in effluent were decreased by 39.31%, 43.33%, 44.11%. AUTHM297 (18.07%), Methanobacterium (16.05%), Geobacter (6.05%) were enriched after enhancement. The net energy after enhancement was 0.7122 kWh m^-3. These results confirmed that ERB and HM were enriched via iron-modified biochar to achieve high efficiency of SMX wastewater treatment.

The effects of pH on the production of volatile fatty acids and microbial dynamics in long-term reactor operation

Volatile fatty acids, intermediate products of anaerobic digestion, are one of the most promising biobased products. In this study, the effects of acidic (pH 5), neutral (without pH adjustment) and alkali (pH 10) pH on production efficiency and composition of volatile fatty acids (VFAs) and bacterial community profile were analyzed. The anaerobic sequencing batch reactors were fed cheese production wastewater as substrate and inoculated by anaerobic granular seed sludge. The results showed that acidic pH improved VFA production yield (0.92 at pH 5; 0.42 at pH 10 and 0.21 gCOD/gVS at neutral pH). Furthermore, propionic acid was dominant under both pH 10 (64 ± 20%) and neutral pH (72 ± 8%), whereas, acetic acid (23 ± 20%4), propionic acid (22 ± 3%), butyric acid (21 ± 4%) and valeric acid (15 ± 8%) were almost equally distributed under pH 5. Adaptation of bacterial community to different pH conditions might steer the acid profile: Bacteroidetes (50.07 ± 2%) under pH 10, Proteobacteria (40.74 ± 7%) under neutral pH and Firmicutes (47.64 ± 9%) under pH 5 were the most dominant phylum, respectively. Results indicated pH plays a significant role in VFA production, acid composition, and bacterial community structure. However, in order to gain a concrete understanding effects of pH, characterization of intracellular and extracellular metabolites with dynamics of the microbial community is required.

Antibiotics in anaerobic digestion: Investigative studies on digester performance and microbial diversity

The ever-increasing consumption of antibiotics in both humans and animals has increased their load in municipal and pharmaceutical industry waste and may cause serious damage to the environment. Impact of antibiotics on the performance of commercially used anaerobic digesters in terms of bioenergy output, antibiotics' removal and COD removal have been compared critically with a few studies indicating >90% removal of antibiotics. AnMBR performed the best in terms of antibiotic removal, COD removal and methane yield. Most of the antibiotics investigated have adverse effects on microbiome associated with different stages and methane generation pathways of AD which has been assessed using high throughput technologies like metatranscriptomics, metaproteomics and flow cytometry. Perspectives have been given for understanding the fate and elimination of antibiotics from AD. The challenge of optimization and process improvement needs to be addressed to increase efficiency of the anaerobic digesters.

Enhanced production of short-chain fatty acids from sludge by thermal hydrolysis and acidogenic fermentation for organic resource recovery

Acidogenic fermentation (FM treatment) converts organics in waste sludge to valuable short-chain fatty acids (SCFAs). To maintain a favorable condition for the production of SCFAs, an alkali is often added continuously to maintain an alkaline pH in the fermenter. However, this chemical adjustment is costly and biotic hydrolysis is slow. In this research, thermal hydrolysis (TH) was introduced as a pretreatment to enhance fermentation and SCFA production. The results were compared with those obtained from the untreated sludge that underwent fermentation with a daily pH 10 adjustment (NT-FM_pH10). The TH pretreatment resulted in rapid abiotic hydrolysis within a short period (1 h), releasing more than 30.5% of organics into the liquid phase of the sludge. These dissolved organics in sludge promoted rapid acidogenesis and SCFA production. TH together with a one-time alkali pretreatment further increased the production of SCFAs during sludge fermentation (TH&Alk-FM): it produced 22.8% more SCFAs than the non-treated NT-FM_pH10 sludge with alkaline pH control during fermentation. Semicontinuous fermentation further showed the advantage of the TH&Alk-FM process, as a rapid and high production of SCFAs was achieved when the fermentation time was shortened from 5 d to 2 d. The microbial community analysis revealed that TH&Alk-FM and NT-FM_pH10 sludge samples had simple but varied microbial communities. The dominant genera in the TH&Alk-FM sludge were unclassified Ruminococcaceae (18.9%) and unclassified Porphyromonadaceae (22.3%), belonging to the classes Clostridia and Bacteroidia, respectively. NT-FM_pH10 was dominated by Tissierella (23.7%) and Proteiniborus (13.5%), which belong to Clostridia. Compared with NT-FM_pH10, the microbial consortia in TH&Alk-FM were supplied with sufficient soluble organics and performed better in fermentation and SCFA production, without the need for the daily alkali addition to control pH.

Emerging pharma residue contaminants: Occurrence, monitoring, risk and fate assessment - A challenge to water resource management

Water is one of the important gifts to mankind. In recent days the accessibility of pharmaceuticals in the environment is progressively a worldwide concern. The significant wellspring of these contaminations in water assets is drugs for human use or veterinary medications. Intermediates, active metabolites and raw materials present in water from pharmaceutical industry waste because of incomplete sewage treatment systems. Various pharmaceutical components such as analgesic/antipyretics such as Ibuprofen (57.9-104 ng/L), Diclofenac (17-129 ng/L), antibiotics such as Sulfamethoxazole (28.7-124.5 ng/L), Sulfamethazine (29.2-83.9 ng/L), Azithromycin (10-68 ng/L), psychiatric drug such as Carbamazepine (9.3-92.4 ng/L), stimulants such as caffeine greater than 55 ng/L, antidepressants, antihypertensive, contraceptives etc., are present in water resources and have been detected in mg/L to μg/L range. The synergic effects and ecotoxicological hazard assessment must be developed. Studies demonstrate that these drugs might cause morphological, metabolic and sex alterations on sea-going species, and interruption of biodegradation activities. Hazard analysis and assessments are in progress. However, the conventional effluent treatment methods are not sufficient to remove API (active pharmaceutical ingredients) from this water effectively. There is necessitate for continuous monitoring of the pharmaceutical compounds in aquatic ecosystem to save the environment and living form of lives from health hazards. This work highlights the hazards, environmental assessment and the mitigation measures of pharmaceutical pollutants.

Influence of sulfamethoxazole on anaerobic digestion: Methanogenesis, degradation mechanism and toxicity evolution

Sulfamethoxazole (SMX), one of the most widely used sulfonamides antibiotics, is frequently detected in the livestock wastewater. Currently, the focus needs to shift from performance effects to understanding of mechanisms and intermediate toxicity analysis. Our study found that SMX (0.5, 1, and 2 mg/L) stimulated methane production by promoting the process of acetogenesis and homo-acetogenesis. Since 1 mg/L SMX could inhibit the transformation of butyric acid, thus, the stimulation of methane was weak under this condition. Under anaerobic conditions, acetate kinase (AK) and cytochrome P450 enzymes (CYP450) continued to participate in SMX degradation. The increase in SMX concentration affected the release of metabolic enzymes, causing changes in SMX degradation pathways. Based on the main biotransformation products, five biotransformation pathways were proposed, the major transformation reactions including hydroxylation, hydrogenation, acetylation, deamination, oxidation, the elimination of oxygen atoms on sulfonyl, isoxazole ring and NS bond cleavage. Toxicity prediction analysis showed that the toxicities of most SMX transformation products were lower than that of SMX.

Effects of Increasing Concentrations of Enrofloxacin on Co-Digestion of Pig Manure and Corn Straw

Enrofloxacin (ENR) is one of the most commonly used antibiotics in pig farms. In this study, using fresh pig manure and corn straw powder as substrates, the effects of different concentrations of ENR (2.5, 10, and 20 mg/L) on anaerobic digestion in completely mixed anaerobic reactors were investigated. A relatively low concentration of ENR (2.5 mg/L) increased methane production by 47.58% compared with the control group. Among the volatile fatty acids (VFAs) in the reactors, the propionic acid content was the lowest, and the concentrations of acetic acid kinase and coenzyme F420 were highest in the first seven days during peak gas production. However, methane production in the reactors with 10 mg/L and 20 mg/L ENR decreased by 8.59% and 20.25%, respectively. Furthermore, the accelerated hydrolysis of extracellular polymeric substances causes a significant accumulation of VFA levels. The microbial community in anaerobic reactors was analyzed by 16S rRNA sequencing. Proteiniphilum was the dominant bacterial genus. In addition, ENR at 2.5 mg/L effectively increased the abundance and diversity of anaerobic microorganisms, whereas a high concentration of ENR (10 and 20 mg/L) significantly decreased these parameters. This study demonstrated that different concentrations of ENR had significantly different effects on anaerobic digestion.

Polymer Nanocomposite Membrane for Wastewater Treatment: A Critical Review

With regard to global concerns, such as water scarcity and aquatic pollution from industries and domestic activities, membrane-based filtration for wastewater treatment has shown promising results in terms of water purification. Filtration by polymeric membranes is highly efficient in separating contaminants; however, such membranes have limited applications. Nanocomposite membranes, which are formed by adding nanofillers to polymeric membrane matrices, can enhance the filtration process. Considerable attention has been given to nanofillers, which include carbon-based nanoparticles and metal/metal oxide nanoparticles. In this review, we first examined the current status of membrane technologies for water filtration, polymeric nanocomposite membranes, and their applications. Additionally, we highlight the challenges faced in water treatment in developing countries.

Motivation of reactive oxygen and nitrogen species by a novel non-thermal plasma coupled with calcium peroxide system for synergistic removal of sulfamethoxazole in waste activated sludge

Large amounts of antibiotics are concentrated in waste activated sludge (WAS) and released into the environment. It is thus critical to develop advanced sludge treatment technology to remove these antibiotics. Dielectric barrier discharge (DBD) combined with calcium peroxide (CaO₂), as an innovative technology to attenuate sulfamethoxazole (SMX) in sludge, was investigated. Evident synergistic effects between DBD and CaO₂ were observed on the SMX degradation with a synergistic factor of 2.02. Moreover, the energy consumption of DBD/CaO₂ was significantly lower than that of DBD alone. At a typical CaO₂ dosage of 0.1 g/g TS and discharge power of 64.5 W, the highest SMX removal of 96% was achieved within 50 min. The synergistic effects of DBD/CaO₂ could be associated with the base catalysis of H₂O₂ and O₃, UV-base-photolysis, peroxone oxidation, and photocatalytic H₂O₂. DBD/CaO₂ generated various reactive oxygen species (ROS) and nitrogen species (RNS) that participated in SMX removal. The contributions of these reactive species followed the sequence of e^- > •OH > •O₂^- > ¹O₂ > ONOO^-. Based on the detected transformation by-products and their variations during treatment, a plausible SMX degradation pathway in sludge was proposed. Besides, DBD/CaO₂ also promoted sludge disintegration, dewatering, heavy metal removal, sludge reduction, sludge solubilization, and acetate-enriched volatile fatty acid (VFA) production. Therefore, DBD/CaO₂ exhibited great potential for controlling antibiotic, as well as promoting sludge reduction, decontamination, and resourcization.

Effect of antibiotic mixtures on the characteristics of soluble microbial products and microbial communities in upflow anaerobic sludge blanket

Two upflow anaerobic sludge blanket reactors (UASBs) were used to investigate the effects of three antibiotic mixtures (erythromycin, sulfamethoxazole, and tetracycline) on reactor performance, soluble microbial products (SMPs) composition and microbial community. One reactor (UASB_antibiotics) was fed with antibiotic mixtures, whereas another reactor (UASB_control) was used as a control without the addition of antibiotic mixtures. Compared with those in UASB_control, UASB_antibiotics show lower chemical oxygen demand removal efficiency and biogas content. A higher removal efficiency of antibiotic mixtures was obtained in first few stages in UASB_antibiotics. The SMPs composition of effluent from the two reactors did not differ significantly, and the main components were protein-like substances, which produced higher fluorescence intensity in UASB_antibiotics. Gas chromatography-mass spectrometry analysis revealed that the main compounds identified as SMPs (<580 Da) were alkanes, aromatics and esters, with only 20% similarity of SMPs between UASB_antibiotics and UASB_control. Antibiotics had a significant effect on the microbial community structure. Notably, in UASB_control, hydrogenotrophic methanogens, key microorganisms in anaerobic digestion, had an obvious advantage at all stages compared with UASB_antibiotics, whereas acetoclastic methanogen exhibited the opposite pattern. The above results demonstrated that antibiotic mixtures influenced the effluent quality during anaerobic treatment of synthetic wastewater, resulting in changes in the microbial community structure. This study clarified the effect of antibiotic mixtures on the operation of UASBs. It could contribute to identifying potential strategies for improving effluent quality in anaerobic treatment.

Insights into removal of sulfonamides in anaerobic activated sludge system: Mechanisms, degradation pathways and stress responses

The fate of antibiotics in activated sludge has attracted increasing interests. However, the focus needs to shift from concerning removal efficiencies to understanding mechanisms and sludge responding to antibiotic toxicity. Herein, we operated two anaerobic sequencing batch reactors (ASBRs) for 200 days with sulfadiazine (SDZ) and sulfamethoxazole (SMX) added. The removal efficiency of SMX was higher than that of SDZ. SDZ was removed via adsorption (9.91-21.18%) and biodegradation (10.20-16.00%), while biodegradation (65.44-86.26%) was dominant for SMX removal. The mechanisms involved in adsorption and biodegradation were investigated, including adsorption strength, adsorption sites and the roles of enzymes. Protein-like substance (tryptophan) functioned vitally in adsorption by forming complexes with sulfonamides. P450 enzymes may catalyze sulfonamides degradation via hydroxylation and desulfurization. Activated sludge showed distinct responses to different sulfonamides, reflected in the changes of microbial communities and functions. These responses were related to sulfonamides removal, corresponding to the stronger adsorption capacity of activated sludge in ASBR-SDZ and degradation capacity in ASBR-SMX. Furthermore, the reasons for different removal efficiencies of sulfonamides were analyzed according to steric and electronic effects. These findings propose insights into antibiotic removal and broaden the knowledge for self-protection mechanisms of activated sludge under chronic toxicities of antibiotics.

A state of the art overview of carbon-based composites applications for detecting and eliminating pharmaceuticals containing wastewater

The growing prevalence of new toxins in the environment continues to cause widespread concerns. Pharmaceuticals, organic pollutants, heavy metal ions, endocrine-disrupting substances, microorganisms, and others are examples of persistent organic chemicals whose effects are unknown because they have recently entered the environment and are displaying up in wastewater treatment facilities. Pharmaceutical pollutants in discharged wastewater have become a danger to animals, marine species, humans, and the environment. Although their presence in drinking water has generated significant concerns, little is known about their destiny and environmental effects. As a result, there is a rising need for selective, sensitive, quick, easy-to-handle, and low-cost early monitoring detection systems. This study aims to deliver an overview of a low-cost carbon-based composite to detect and remove pharmaceutical components from wastewater using the literature reviews and bibliometric analysis technique from 1970 to 2021 based on the web of science (WoS) database. Various pollutants in water and soil were reviewed, and different methods were introduced to detect pharmaceutical pollutants. The advantages and drawbacks of varying carbon-based materials for sensing and removing pharmaceutical wastes were also introduced. Finally, the available techniques for wastewater treatment, challenges and future perspectives on the recent progress were highlighted. The suggestions in this article will facilitate the development of novel on-site methods for removing emerging pollutants from pharmaceutical effluents and commercial enterprises.

Biochar-Supported TiO2-Based Nanocomposites for the Photocatalytic Degradation of Sulfamethoxazole in Water-A Review

Sulfamethoxazole (SMX) is a frequently used antibiotic for the treatment of urinary tract, respiratory, and intestinal infections and as a supplement in livestock or fishery farming to boost production. The release of SMX into the environment can lead to the development of antibiotic resistance among the microbial community, which can lead to frequent clinical infections. SMX removal from water is usually done through advanced treatment processes, such as adsorption, photocatalytic oxidation, and biodegradation. Among them, the advanced oxidation process using TiO2 and its composites is being widely used. TiO2 is a widely used photocatalyst; however, it has certain limitations, such as low visible light response and quick recombination of e-/h+ pairs. Integrating the biochar with TiO2 nanoparticles can overcome such limitations. The biochar-supported TiO2 composites showed a significant increase in the photocatalytic activities in the UV-visible range, which resulted in a substantial increase in the degradation of SMX in water. The present review has critically reviewed the methods of biochar TiO2 composite synthesis, the effect of biochar integration with the TiO2 on its physicochemical properties, and the chemical pathways through which the biochar/TiO2 composite degrades the SMX in water or aqueous solution. The degradation of SMX using photocatalysis can be considered a useful model, and the research studies presented in this review will allow extending this area of research on other types of similar pharmaceuticals or pollutants in general in the future.

Characteristics of microbial community in EGSB system treating with oxytetracycline production wastewater

In order to realize the efficient and stable operation of anaerobic digestion for oxytetracycline (OTC) production wastewater which contains high concentration refractory organic matters and antibiotic residues, two laboratory-scale EGSB reactors (the experimental reactor and the control reactor) were constructed for pre-treating OTC production wastewater and the complex characteristics and connections among anaerobic fermentative bacteria, methanogens and fungi were analyzed. The experimental reactor gradually increased OTC doses of 0-200 mg/L by four phases compared with the control reactor which was fed without OTC addition during 280 days' operation. The average COD removal efficiency of 91.44% with the average OTC removal efficiency of 27.90% was achieved at OTC concentration of 200 mg/L. The addition of OTC did not affect the preponderant methanogen type, and Methanosaeta, a strict aceticlastic methanogen genus, was dominant both in working and controlling reactors on day 280. Redundancy analysis revealed that OTC and VFAs were the main environmental factors affecting the microbial communities and molecular ecological networks analysis indicated that the key genera principally belonged to Methanosaeta, Proteobacteria and Apiotrichum. Additionally, the fungi genus Apiotrichum might be related to the degradation of complex organic contaminants in OTC production wastewater treatment system.

Anaerobic biodegradation of four sulfanilamide antibiotics: Kinetics, pathways and microbiological studies

Large amounts of sulfanilamide antibiotics (SAs) have been excreted into the manure. In this study, the anaerobic biodegradation of four kinds of SAs including sulfaquinoxaline (SQX), sulfamethoxazole (SMX), sulfamethoxine (SMD) and sulfathiazole (STZ) was investigated. The degradation rates of SQX and STZ decreased with the increase of the concentrations of other organics, but those of SMX and SMD were less affected. The average degradation rates of SAs were in the order of SMX >SMD ≈QX >STZ, with the best degradation rate constants of 0.30125, 0.14752, 0.16696, and 0.06577 /d, respectively. STZ had the greatest effect on the population richness of microbes, whereas SQX had the largest impact on the population diversity. The degradation rates of SAs were positively correlated with the abundances of Proteobacteria and Bacteroidetes, and negatively correlated with the abundance of Firmicutes. The common degradation pathways of SAs were S-N cleavage and substitution. The specific functional groups of SQX, SMX and SMD, including quinoxaline, isoxazole and pyrimidine rings, could be opened, but the thiazole ring of STZ was difficult to be decomposed. After the rings of the specific functional groups were opened, they would be further substituted or decomposed to be products with small molecules.

Use of Electrocoagulation for Treatment of Pharmaceutical Compounds in Water/Wastewater: A Review Exploring Opportunities and Challenges

Increasing dependency on pharmaceutical compounds including antibiotics, analgesics, antidepressants, and other drugs has threatened the environment as well as human health. Their occurrence, transformation, and fate in the environment are causing significant concerns. Several existing treatment technologies are there with their pros and cons for the treatment of pharmaceutical wastewater (PWW). Still, electrocoagulation is considered as the modern and decisive technology for treatment. In the EC process, utilizing electricity (AC/DC) and electrodes, contaminants become coagulated with the metal hydroxide and are separated by co-precipitation. The main mechanism is charge neutralization and adsorption of contaminants on the generated flocs. The range of parameters affects the EC process and is directly related to the removal efficiency and its overall operational cost. This process only could be scaled up on the industrial level if process parameters become optimized and energy consumption is reduced. Unfortunately, the removal mechanism of particular pharmaceuticals and complex physiochemical phenomena involved in this process are not fully understood. For this reason, further research and reviews are required to fill the knowledge gap. This review discusses the use of EC for removing pharmaceuticals and focuses on removal mechanism and process parameters, the cost assessment, and the challenges involved in mitigation.

Anaerobic Digestion and Removal of Sulfamethoxazole, Enrofloxacin, Ciprofloxacin and Their Antibiotic Resistance Genes in a Full-Scale Biogas Plant

Anaerobic digestion is one of the best ways to re-use animal manure and agricultural residues, through the production of combustible biogas and digestate. However, the use of antibiotics for preventing and treating animal diseases and, consequently, their residual concentrations in manure, could introduce them into anaerobic digesters. If the digestate is applied as a soil fertilizer, antibiotic residues and/or their corresponding antibiotic resistance genes (ARGs) could reach soil ecosystems. This work investigated three common soil emerging contaminants, i.e., sulfamethoxazole (SMX), ciprofloxacin (CIP), enrofloxacin (ENR), their ARGs sul1, sul2, qnrS, qepA, aac-(6′)-Ib-cr and the mobile genetic element intI1, for one year in a full scale anaerobic plant. Six samplings were performed in line with the 45-day hydraulic retention time (HRT) of the anaerobic plant, by collecting input and output samples. The overall results show both antibiotics and ARGs decreased during the anaerobic digestion process. In particular, SMX was degraded by up to 100%, ENR up to 84% and CIP up to 92%, depending on the sampling time. In a similar way, all ARGs declined significantly (up to 80%) in the digestate samples. This work shows how anaerobic digestion can be a promising practice for lowering antibiotic residues and ARGs in soil.

Anaerobic Transformation and Detoxification of Sulfamethoxazole by Sulfate-Reducing Enrichments and Desulfovibrio vulgaris

Sulfamethoxazole (SMX) is a veterinary antibiotic that is not efficiently removed from wastewater by routine treatment and therefore can be detected widely in the environment. Here, we investigated whether microbial anaerobic transformation can contribute to the removal of SMX in constructed systems. We enriched SMX-transforming mixed cultures from sediment of a constructed wetland and from digester sludge of a wastewater treatment plant. Transformation of SMX was observed in both sulfate-reducing and methanogenic cultures, whereas nitrate-reducing cultures showed no SMX transformation. In sulfate-reducing cultures, up to 90% of an initial SMX concentration of 100-250 μM was removed within 6 weeks of incubation, and the experiments demonstrated that the transformation was microbially catalyzed. The transformation products in sulfate-reducing cultures were identified as the reduced and isomerized forms of the isoxazole SMX moiety. The transformation products did not spontaneously reoxidize to SMX after oxygen exposure, and their antibacterial activity was significantly decreased compared to SMX. Population analyses in sequential transfers of the sulfate-reducing cultures revealed a community shift toward the genus Desulfovibrio. We therefore tested a deposited strain of Desulfovibrio vulgaris Hildenborough for its capacity to transform SMX and observed the same transformation products and similar transformation rates as in the enrichment cultures. Our work suggests that an initial anaerobic step in wastewater treatment can reduce the concentration of SMX in effluents and could contribute to decreased SMX concentrations in the environment.

Effects of Sulfamethoxazole on the Microbial Community Dynamics During the Anaerobic Digestion Process

Anaerobic digestion (AD) treatment of cattle manure and slurry makes it possible to produce biogas, a renewable and storable biofuel, as well as digestate, a residual organic matter that can be used to replace chemical fertilizers. On the other hand, the intense use of antibiotics (e.g., sulfamethoxazole) in animal husbandry practices is showing increasing negative impacts resulting from the release of still metabolically active molecules into agroecosystems. In the present study, cattle manure collected from an AD plant-feeding tank was used as feedstock for AD experiments in which some batches were spiked with 5 mg L^-1 of sulfamethoxazole (SMX). Adding the antibiotic affected the microbial community dynamic; in particular, the efficiency of the acidogenic and acetogenic phases of the process corresponded to higher CH₄ and H₂ production than in the control. SMX was also degraded, and at the end of the experiment (69 days), just 20% of its initial concentration was found. The relative abundance (ARG/16S) of resistance genes sul1, sul2, and the proxy intI1 initially found in the ingestate decreased during the AD in both the spiked and control batches, suggesting that this process lowers the likelihood of antibiotic resistance genes spreading.

A comprehensive study of volatile fatty acids production from batch reactor to anaerobic sequencing batch reactor by using cheese processing wastewater

Volatile fatty acids (VFAs) has great potential for closed-loop production in dairy industries via resource recovery from waste-streams. In the current study, the transition of VFA production from batch reactor to anaerobic sequencing batch reactor (ASBR) by using cheese industry wastewater under alkali pH was evaluated with respect to seed sludge structure, microbial diversity and reactor type. The transition from the batch reactor to the ASBR demonstrated that the maximum VFA production yield (g COD/g SCOD) was comparable in two reactors (batch: 0.97; ASBR: 0.94), whereas, the dominant acid type was different (batch: 49% lactic acid; ASBR: 80% propionic acid). There was a significant correlation between the productions of butyric acid with Gracilibacteraceae and Desulfovibrionaceae; propionic acid with Desulfovibrionaceae and Synergistaceae; lactic acid with Pseudomonadaceae and Rhodocyclaceae. The high VFA production efficiency can be achieved by long term reactor operation, which enables the shift from industrial waste-streams to biorefineries.

A comprehensive review on contaminants removal from pharmaceutical wastewater by electrocoagulation process

The pharmaceuticals are emergent contaminants, which can create potential threats for human health and the environment. All the pharmaceutical contaminants are becoming enormous in the environment as conventional wastewater treatment cannot be effectively implemented due to toxic and intractable action of pharmaceuticals. For this reason, the existence of pharmaceutical contaminants has brought great awareness, causing significant concern on their transformation, occurrence, risk, and fate in the environments. Electrocoagulation (EC) treatment process is effectively applied for the removal of contaminants, radionuclides, pesticides, and also harmful microorganisms. During the EC process, an electric current is employed directly, and both electrodes are dissoluted partially in the reactor under the special conditions. This electrode dissolution produces the increased concentration of cation, which is finally precipitated as hydroxides and oxides. Different anode materials usage like aluminum, stainless steel, iron, etc. are found more effective in EC operation for efficient removal of pharmaceutical contaminants. Due to the simple procedure and less costly material, EC method is extensively recognized for pharmaceutical wastewater treatment over further conventional treatment methods. The EC process has more usefulness to destabilize the pharmaceutical contaminants with the neutralization of charge and after that coagulating those contaminants to produce flocs. Thus, the review places particular emphasis on the application of EC process to remove pharmaceutical contaminants. First, the operational parameters influencing EC efficiency with the electroanalysis techniques are described. Second, in this review emerging challenges, current developments and techno-economic concerns of EC are highlighted. Finally, future recommendations and prospective on EC are envisioned.

Acidogenic fermentation of food waste for production of volatile fatty acids: Bacterial community analysis and semi-continuous operation

Acidogenic fermentation of food waste for production of volatile fatty acids (VFAs) contributes to both food waste minimization and resource recovery. To gain knowledge on functional bacterial communities and facilitate continuous production of VFAs, this research firstly studied the effects of initial pH values (i.e. 5, 6 and 7) and temperatures (i.e. 35 °C and 55 °C) on VFAs production, distribution, and bacterial communities during acidogenic fermentation of food waste. The optimal conditions were determined as pH 7 and 35 °C, corresponding to the highest total VFAs yield of 11.8 g COD/L with major components of acetic, propionic and butyric acid. Bioinformatic analysis showed that the relative abundance of the dominant bacterial classes (e.g. Clostridia, Bacteroidia and Bacilli) were changed by the initial pH values in both mesophilic and thermophilic reactors. NMDS analysis confirmed a significant difference between mesophilic and thermophilic communities. Finally, the feasibility of continuous production and recovery of VFAs was validated using a two-phase leachate bed bioreactor at the optimal conditions. Average concentration and yield of the total VFAs in the continuous operation were 6.3 g COD/L and 0.29 g VFA/g VS_added, respectively. The findings in this study could provide pivotal technical supports for potential pilot- and commercial-scale biorefinery plants for VFAs production from food waste.

Volatile fatty acid production from semi-synthetic milk processing wastewater under alkali pH: The pearls and pitfalls of microbial culture

Volatile fatty acids (VFA) are one of the most promising sustainable and environmentally friendly bioproduct owing to their wide usage area and high market demand. For this reason, in this study, the evaluation of VFA production from pure and mixed bacterial cultures was aimed. Three different mixed cultures with C. aceticum, C. butyricum and P. acidipropionici as pure cultures were used for inoculation of milk processing wastewater fermentation under pH 10 for 15 days. The mixed culture fermentation had the highest VFA production efficiency whereas the highest amount of acetic, butyric and propionic acid productions were obtained by C. aceticum, C. butyricum and P. acidipropionici, respectively. Also, the mixed cultures demonstrated faster pH regulation and acclimation than the pure cultures tested. Therefore, development of synthetic cultures may offer a useful approach to produce VFA mixtures with one-dominant acid type and with high production efficiency.

Removal and biotransformation pathway of antibiotic sulfamethoxazole from municipal wastewater treatment by anaerobic membrane bioreactor

A lab-scale mesophilic anaerobic membrane bioreactor (AnMBR) was used to treat synthetic municipal wastewater with variable concentrations of antibiotic Sulfamethoxazole (SMX) and bulk organics in this study. The removal and biotransformation pathway of SMX in the AnMBR were systematically investigated during a 170 d of operation under hydraulic retention time of 1 d. Average SMX removal was 97.1% under feed SMX of 10-1000 μg/L, decreasing to 91.6 and 88.0% under feed SMX of 10,000 and 100,000 μg/L due to the inhibition effects of high SMX loading rate on anaerobic microorganisms. SMX biotransformation followed pseudo-first order reaction kinetics based on SMX removal independent of feed SMX of 10-1000 μg/L during continuous operation and also in a batch test under initial SMX of 100,000 μg/L. According to the identified 7 transformation products (TPs) by gas chromatography-mass spectrometry, the biotransformation pathway of SMX from municipal wastewater treatment via AnMBR was first proposed to consist of 2 primary routes: 1) Butylbenzenesulfonamide without antibiotic toxicity dominated under feed SMX of 10-100 μg/L; 2) Sulfanilamide with much lower antibiotic toxicity than SMX dominated under feed SMX of 1000-100000 μg/L, further transforming to secondary TPs (4-Aminothiophenol, Aniline, Acetylsulfanilamide) and tertiary TPs (4-Acetylaminothiophenol, Acetylaniline).

Bacterial community changes and antibiotic resistance gene quantification in microbial electrolysis cells during long-term sulfamethoxazole treatment

In this study, sulfamethoxazole served as the electron donor for microbial electrolysis cells. After 6 months of operation, the removal efficiencies of sulfamethoxazole in three microbial electrolysis cells were 77.60%, 87.55%, and 92.53% for a 3-day period and were directly proportional to the initial added concentrations. However, the removal efficiencies in the microbial electrolysis cells with open circuits and without microorganisms were only 51% and 8%, respectively. Higher sulfamethoxazole concentrations and sustained electrical stimulation caused faster bioelectrochemical reactions, thereby enhancing sulfamethoxazole degradation. Bacterial community analysis revealed that Proteobacteria and Synergistetes, which are the main functional phyla, proliferated with increased antibiotic concentrations. The qPCR results indicated that the copy numbers of antibiotic resistance genes and integrons in microbial electrolysis cell biofilms and effluents were distinctly lower than those in traditional biological treatment systems. Thus, the generation and dissemination of antibiotic resistance genes might be a diminished challenge in microbial electrolysis cells.

Volatile fatty acids production via mixed culture fermentation: Revealing the link between pH, inoculum type and bacterial composition

The aim of the study was to investigate the effects of operational parameters, inoculum type and bacterial community on mixed culture fermentation to produce one dominant acid type in the mixture of volatile fatty acids (VFA). The study was performed using three different inocula (large&small granular and slurry) with glucose under various initial pH. The VFA production efficiency reached to 0,97 (gCOD/gSCOD) by granular sludge. VFA composition was changed by initial pH: in neutral conditions, acetic acid; in acidic conditions, acetic and butyric acids, in alkali conditions butyric acid were dominated, respectively. The VFA production was positively affected by the high relative abundance of Firmicutes. On the contrary, a negative correlation was seen between VFA production and the relative abundance of Chloroflexi. The results revealed the physical sludge structure of inoculum was the key factor for production efficiency, whereas, pH was the most important parameter to affect VFA composition.

Fate of pharmaceuticals and antibiotic resistance genes in a full-scale on-farm livestock waste treatment plant

This study investigated, for the first time, the distribution and fate of 28 multiple-class veterinary pharmaceuticals and antibiotics (PhACs), and their corresponding antibiotic resistance genes (ARGs), in a full-scale on-farm livestock waste treatment plant. The plant relies on several technologies, including: anaerobic digestion (AD), solid-liquid separation, and two stages reverse osmosis (RO) of the liquid digestate. Tetracycline, fluoroquinolone, lincosamide and pleuromutilin antibiotics, together with anti-helmintic (flubendazole) and anti-inflammatory (flunixin) drugs were the most frequently detected compounds in livestock waste and in slaughterhouse sludge. This last fraction is used as co-substrate in the AD process and showed to be an important input source of PhACs and ARGs. In terms of treatment performance, AD exhibited moderate to low PhACs and ARGs reduction, while a large fraction (<50%) of the PhACs present in the digestate were distributed onto the solid fraction, after solid-liquid separation. Both solid and liquid digestates had relatively high copy numbers of ARGs. Finally, RO showed high rejection percentages for all PhACs (<90%), with concentrations in the low ng L^-1 range in permeates, for most target PhACs. Nevertheless, moderate copy numbers of ARGs were detected in permeates.

Identification of ceftazidime interaction with bacteria in wastewater treatment by Raman spectroscopic mapping

Raman spectroscopy yields a fingerprint spectrum and is of great importance in medical and biological sciences as it is non-destructive, non-invasive, and available in the aqueous environment. In this study, Raman spectroscopy and Raman mapping were used to explore the dynamic biochemical processes in screened bacteria under ceftazidime stress. The Raman spectral difference between bacteria with and without antibiotic stress was analyzed by principal component analysis and characteristic peaks were obtained. The results showed that amino acids changed first and lipids were reduced when bacteria were exposed to ceftazidime stress. Furthermore, in Raman mapping, when bacteria were subjected to antibiotic stress, the peak at 1002 cm^-1 (phenylalanine) increased, while the peak at 1172 cm^-1 (lipids) weakened. This indicates that when bacteria were stimulated by antibiotics, the intracellular lipids decreased and the content of specific amino acids increased. The reduction of intracellular lipids may suggest a change of membrane permeability. The increase of specific amino acids suggests that bacteria resist external stimuli of antibiotics by regulating the activities of related enzymes. This study explored the processes of the action between bacteria and antibiotics by Raman spectroscopy, and provides a foundation for the further study of the dynamics of microbial biochemical processes in the future.

Characterization of the Primary Sludge from Pharmaceutical Industry Effluents and Final Disposition

The generation of large volumes of waste by industrial processes has become an object of study because of the necessity to characterize the composition of residues in order to suggest appropriate treatments and to minimize adverse environmental impacts. We performed analyses of total fixed and volatile solids, moisture, and chemical oxygen demand (COD). We found high organic matter content. We also measured physicochemical characteristics, including corrosivity, reactivity, and toxicity. Sewage sludge showed levels of chloride and sodium above the maximum allowed limits. These data suggest the potential for anaerobic digestion as a treatment option for sewage sludge and for its use as a biofertilizer.

Overview of sulfonamide biodegradation and the relevant pathways and microorganisms

Sulfonamide antibiotics have aroused increasing concerns due to their ability to enhance the resistance of pathogenic bacteria and promote the spread of antibiotic resistance. Biodegradation plays an important role in sulfonamide dissipation in both natural and engineered ecosystems. In this article, we provided an overview of sulfonamide biodegradation in different systems and summarized the relevant sulfonamide-degrading species and metabolic pathways. The removal of sulfonamides depends on a variety of factors, such as the type and initial concentration of sulfonamides, the properties of water or soil, and treatment process. The removal efficiency of sulfonamides by engineered ecosystems can be improved by optimizing their operating conditions. Much higher sulfonamide removal was also observed in upgraded or advanced treatment systems than in conventional activated sludge systems. Ammonia oxidation might promote sulfonamide biodegradation. In addition, sulfonamide-degraders from different bacterial genera have been isolated and classified, but no bioaugmentation practice has been reported. Different pathways have been detected in sulfonamide biodegradation. Further efforts will be necessary to elucidate in-situ degraders and the metabolic pathways and functional genes of sulfonamide biodegradation.

Problematic effects of antibiotics on anaerobic treatment of swine wastewater

Swine wastewaters with high levels of organic pollutants and antibiotics have become serious environmental concerns. Anaerobic technology is a feasible option for swine wastewater treatment due to its advantage in low costs and bioenergy production. However, antibiotics in swine wastewater have problematic effects on micro-organisms, and the stability and performance of anaerobic processes. Thus, this paper critically reviews impacts of antibiotics on pH, COD removal efficiencies, biogas and methane productions as well as the accumulation of volatile fatty acids (VFAs) in the anaerobic processes. Meanwhile, impacts on the structure of bacteria and methanogens in anaerobic processes are also discussed comprehensively. Furthermore, to better understand the effect of antibiotics on anaerobic processes, detailed information about antimicrobial mechanisms of antibiotics and microbial functions in anaerobic processes is also summarized. Future research on deeper knowledge of the effect of antibiotics on anaerobic processes are suggested to reduce their adverse environmental impacts.

Microbial endogenous response to acute inhibitory impact of antibiotics

Enhanced endogenous respiration was observed as the significant/main response of the aerobic microbial culture under pulse exposure to antibiotics: sulfamethoxazole, tetracycline and erythromycin. Peptone mixture and acetate were selected as organic substrates to compare the effect of complex and simple substrates. Experiments were conducted with microbial cultures acclimated to different sludge ages of 10 and 2 days, to visualize the effect of culture history. Evaluation relied on modeling of oxygen uptake rate profiles, reflecting the effect of all biochemical reactions associated with substrate utilization. Model calibration exhibited significant increase in values of endogenous respiration rate coefficient with all antibiotic doses. Enhancement of endogenous respiration was different with antibiotic type and initial dose. Results showed that both peptone mixture and acetate cultures harbored resistance genes against the tested antibiotics, which suggests that biomass spends cellular maintenance energy for activating the required antibiotic resistance mechanisms to survive, supporting higher endogenous decay rates.

ABBREVIATIONS

[Formula: see text]: maximum growth rate for X_H (day^-1); K_S: half saturation constant for growth of X_H (mg COD/L); b_H: endogenous decay rate for X_H (day^-1); k_h: maximum hydrolysis rate for S_H1 (day^-1); K_X: hydrolysis half saturation constant for S_H1(mg COD/L); k_hx: maximum hydrolysis rate for X_S1 (day^-1); K_XX: hydrolysis half saturation constant for X_S1 (mg COD/L); k_STO: maximum storage rate of PHA by X_H (day^-1); [Formula: see text]: maximum growth rate on PHA for X_H (day^-1); K_STO: half saturation constant for storage of PHA by X_H (mg COD/L); X_H1: initial active biomass (mg COD/L).

The performance and membrane fouling rate of a pilot-scale anaerobic membrane bioreactor for treating antibiotic solvent wastewater under different cross flow velocity

The performance of a pilot-scale anaerobic membrane bioreactor (AnMBR) for treating antibiotic solvent wastewater under different cross flow velocities (CFV) was investigated. Effects of mixed liquid suspended solids (MLSS), colloid total organic carbon (TOC) and CFV on membrane fouling rate (R_MF) were also explored in this paper. Throughout 341 days of experiment, the average total removal rate of N, N-Dimethylformamide (DMF) was 98.5% which hardly affected by the variation of CFV, and the compliance rate of DMF was 92% according to the Chinese standard (<25 mg/L). However, the relevant high total removal rate of M-cresol (MC) was achieved as 97.5%, the content of effluent failed to meet the national level emission standard (<0.1 mg/L). The biogas yield and the methane content of the biogas increased gradually with the increase of CFV, and the average methane content were over 70%. There were four kinds of methanogens in AnMBR, Methanosaeta spp was the largest methanogenic community, with an area of 45-70% of the archae. There was a linear relationship between colloid TOC and R_MF at different MLSS concentrations. Then a universal mathematical model for the changes of R_MF with influence factors was established. The result showed that model well fitted the laboratory data. It is suggested that the model proposed could reflect and manage the membrane fouling of AnMBR treating antibiotic solvent wastewater.

Association between degradation of pharmaceuticals and endocrine-disrupting compounds and microbial communities along a treated wastewater effluent gradient in Lake Mead

The role of microbial communities in the degradation of trace organic contaminants in the environment is little understood. In this study, the biotransformation potential of 27 pharmaceuticals and endocrine-disrupting compounds was examined in parallel with a characterization of the native microbial community in water samples from four sites variously impacted by urban run-off and wastewater discharge in Lake Mead, Nevada and Arizona, USA. Samples included relatively pristine Colorado River water at the upper end of the lake, nearly pure tertiary-treated municipal wastewater entering via the Las Vegas Wash, and waters of mixed influence (Las Vegas Bay and Boulder Basin), which represented a gradient of treated wastewater effluent impact. Microbial diversity analysis based on 16S rRNA gene censuses revealed the community at this site to be distinct from the less urban-impacted locations, although all sites were similar in overall diversity and richness. Similarly, Biolog EcoPlate assays demonstrated that the microbial community at Las Vegas Wash was the most metabolically versatile and active. Organic contaminants added as a mixture to laboratory microcosms were more rapidly and completely degraded in the most wastewater-impacted sites (Las Vegas Wash and Las Vegas Bay), with the majority exhibiting shorter half-lives than at the other sites or in a bacteriostatic control. Although the reasons for enhanced degradation capacity in the wastewater-impacted sites remain to be established, these data are consistent with the acclimatization of native microorganisms (either through changes in community structure or metabolic regulation) to effluent-derived trace contaminants. This study suggests that in urban, wastewater-impacted watersheds, prior exposure to organic contaminants fundamentally alters the structure and function of microbial communities, which in turn translates into greater potential for the natural attenuation of these compounds compared to more pristine sites.

Anaerobic treatment of pharmaceutical wastewater: A critical review

Pharmaceutical wastewaters are usually produced by chemical-synthetic process, and thus contain high levels of organic pollutants, biotoxicity and salinity. Anaerobic technology is a viable option for treating pharmaceutical wastewater owing to its advantages of withstanding high organic-loading, less sludge production and lower operating cost as compared with conventional activated sludge process. In this paper, several types of modern anaerobic or hybrid systems were reviewed on their pollutant reduction performance and operating conditions for treating pharmaceutical wastewater. Meanwhile, the typical predominant microbial populations found in anaerobic process treating pharmaceutical wastewater were summarized. Moreover, the environmental impact of antibiotic residues and health risk of spreading of antibiotic resistant genes (ARGs) were also assessed to offer an in-depth understanding of the growing concern on the discharge of treated pharmaceutical effluent.

The long-term impact of cefalexin on organic substrate degradation and microbial community structure in EGSB system

In order to investigate long-term effect of cefalexin (CFX) on the performance of expanded granular sludge bed (EGSB) system and microbial community structure, two 1.47 L EGSB reactors E1 and E2 were designed and run for 224 days treating with synthetic antibiotic wastewater. For the purpose of comparison, E1 was fed with synthetic antibiotic industry wastewater with CFX added as the test reactor, while, E2 was fed without any CFX added as the control reactor (E2). The addition of CFX resulted in the continual increasing of soluble COD (sCOD) and accumulation of VFAs in the effluent of E1 system. Besides, it was found that the accumulation of CFX by-products D-1, D-2 and D-3 was negative correlation with sCOD removal efficiency. Furthermore, the microbial community structures were also investigated. For the bacterial community, Gelria and Syntrophorhabdus which can ferment propionate and other organic pollutants as their substrate were obviously enriched in E1 system. For the archaea, there was more functional diversity in E1 system than in E2 system. Furthermore, fungi also played an important role on the removal of complex organics in E1 system.

Performance and microbial community variations of anaerobic digesters under increasing tetracycline concentrations

The impact of different concentrations of tetracycline on the performance of anaerobic treatment was evaluated. Results revealed that for all of the tested tetracycline concentrations, no major sustained impact on methane production was observed. Instead, a significant increase in propionic acid was observed in the reactor subjected to the highest concentration of tetracycline (20 mg/L). Microbial community analyses suggest that an alternative methanogenic pathway, specifically that of methanol-utilizing methanogens, may be important for ensuring the stability of methane production in the presence of high tetracycline concentrations. In addition, the accumulation of propionate was due to an increase in volatile fatty acids (VFA)-producing bacteria coupled with a reduction in propionate utilizers. An increase in the abundance of tetracycline resistance genes associated with ribosomal protection proteins was observed after 30 days of exposure to high concentrations of tetracycline, while other targeted resistance genes showed no significant changes. These findings suggest that anaerobic treatment processes can robustly treat wastewater with varying concentrations of antibiotics while also deriving value-added products and minimizing the dissemination of associated antibiotic resistance genes.

Change in microbial community in landfill refuse contaminated with antibiotics facilitates denitrification more than the increase in ARG over long-term

In this study, the addition of sulfamethazine (SMT) to landfill refuse decreased nitrogen intermediates (e.g. N₂O and NO) and dinitrogen (N₂) gas fluxes to <0.5 μg-N/kg-refuse·h^-1, while the N₂O and N₂ flux were at ~1.5 and 5.0 μg-N/kg-refuse·h^-1 respectively in samples to which oxytetracycline (OTC) had been added. The ARG (antibiotic resistance gene) levels in the refuse increased tenfold after long-term exposure to antibiotics, followed by a fourfold increase in the N₂ flux, but SMT-amended samples with the largest resistome facilitated the denitrification (the nitrogen accumulated as NO gas at ~6 μg-N/kg-refuse·h^-1) to a lesser extent than OTC-amended samples. Further, deep sequencing results show that long-term OTC exposure partially substituted Hyphomicrobium, Fulvivirga, and Caldilinea (>5%) for the dominant bacterial hosts (Rhodothermus, ~20%) harboring nosZ and norB genes that significantly correlated with nitrogen emission pattern, while sulfamethazine amendment completely reduced the relative abundance of the "original inhabitants" functioning to produce NO_x gas reduction. The main ARG carriers (Pseudomonas) that were substantially enriched in the SMT group had lower levels of denitrifying functional genes, which could imply that denitrification is influenced more by bacterial dynamics than by abundance of ARGs under antibiotic pressures.

Effect of electrical stimulation on the fate of sulfamethoxazole and tetracycline with their corresponding resistance genes in three-dimensional biofilm-electrode reactors

Three-dimensional biofilm-electrode reactors (3D-BERs), which possess a large effective area to drive the reductive degradation of contaminants, have recently attracted attention for wastewater treatment. There have been few studies of the potential and risks of the application of this system on the removal of antibiotics. Here four 3D-BERs were designed to initially assess the potential for electrical stimulation to remove sulfamethoxazole (SMX), tetracycline (TC) and chemical oxygen demand, and to study the fate of the corresponding antibiotic resistance genes. The results indicated that the 3D-BER could significantly reduce antibiotic concentrations in wastewater, achieving removal rates of 88.9-93.5% and 89.3-95.6% for SMX and TC, respectively. The concentrations of target genes (sulI, sulII, sulIII, tetA, tetC, tetO, tetQ, and tetW) in a granular-activated carbon (GAC) cathode were higher than those in a GAC anode in the 3D-BR (reactor with biological sludge and no voltage) and 3D-BER. An obvious increasing trend in the relative abundances of all target genes was observed in the GAC. A low current density could not increase the development of sul and tet genes in the 3D-BER. The total resistance was in the following order: 3D-BER > 3D-BR > 3D-ER (reactor with 0.8 V and without biological sludge). In addition, the dehydrogenase activity of the microorganisms in the 3D-BER was significantly higher than in the 3D-BR (p < 0.05). High-throughput sequencing revealed that the microbial communities and relative abundance at the phyla level were affected by current stimulation.

Anaerobic sulfamethoxazole degradation is driven by homoacetogenesis coupled with hydrogenotrophic methanogenesis

In this study, microbial community dynamics were assessed in two lab-scale anaerobic sequencing batch reactors (ASBRs). One of the reactors was fed by synthetic pharmaceutical industry wastewater with sulfamethoxazole (SMX) as the test reactor and the other without sulfamethoxazole as the control reactor. DNA based DGGE results indicated that Clostiridum sp. became dominant in the SMX reactor while the inoculum was dominated with Firmicutes (61%) and Methanomicrobiales (28%). However their abundances in active community decreased through the last phase. Also the abundance of hydrogenotrophs was high in each phase, while acetoclastic methanogens disappeared in the last phase. Q-PCR analysis revealed that there is a significant reduction in the bacterial community approximately 84%, while methanogens increased to 97% through the operation. Additionally an increase in the expression level of bacterial and methanogenic 16S rRNA (60% and 20%, respectively) was detected. Significant correlation between microbial community and the reactor operation data was found. The study demonstrated that the microbial community maintains the system stability under high antibiotic concentration and long-term operation by homoacetogenesis coupled with hydrogenotrophic methanogenesis.