Assessment of the performance of SMFCs in the bioremediation of PAHs in contaminated marine sediments under different redox conditions and analysis of the associated microbial communities

Depletion of crude oil and fuel in the Arctic. Summer and winter field studies with immobilized oil in seawater at Svalbard

Seasonal dynamics can vastly influence the natural depletion of oil spilled into the ocean and the Arctic regions are characterized by large seasonal changes, especially in temperature and daylight. To determine the influences of seasonal variation on natural oil depletion processes like dissolution, photooxidation and biodegradation, we deployed thin films of three oils in natural seawater during the Arctic summer and winter in Svalbard, Norway. The extent of oil depletion varied with season and the type of the oil, however, considerable depletion of n-alkanes and polycyclic aromatic compounds were observed during both summer and winter. The influence of temperature on depletion of components was not consistent between the three oils and only small effects of photooxidation were found during the summer. We further found variations in the composition of bacterial communities associated with the oil films between the seasons with an apparently delayed succession during the winter. The bacterial communities generally contained high abundances of previously reported oil degrading taxa which displayed distinct seasonal patterns in their relative abundance. Oleispira and Oleibacter were dominantly found during the summer and Colwellia during the winter, while Cycloclasticus and C1-B045 were highly abundant during both seasons. While the environmental factors were likely the cause for variations in oil depletion between the seasons and oils, the seasonal differences in the bacterial community composition did not seem to affect their biodegradation potential.

Combined pollution of heavy metals and polycyclic aromatic hydrocarbons in non-ferrous metal smelting wastewater treatment plant: Distribution profiles, removal efficiency, and ecological risks to receiving river

Combined pollution status of heavy metals (HMs) and polycyclic aromatic hydrocarbons (PAHs) from non-ferrous metal smelting (NFMS) industry is crucial but has not been explored. Herein, the co-distribution of HMs and PAHs in a NFMS wastewater treatment plant and the impacts on the receiving river were investigated. Cu, As, and Ni were found to be the characteristic HMs, while Acenaphthylene was the characteristic PAHs in the NFMS wastewater. The removal of HMs and PAHs in wastewater showed a strong positive correlation (R2 > 0.84, p < 0.05) with removal efficiency of 90.7 % and 94.1 %, respectively. It was estimated 547.5 kg HMs and 13.3 kg PAHs were discharged into the receiving river annually. The average concentration of HMs and PAHs in downstream was respective 1.6 and 2.7 times higher than that in upstream, and the sites near discharge outlet had significant spatial autocorrelation (p < 0.05), suggesting the discharge of NFMS wastewater had significantly influenced the receiving river. Aquatic organisms were posed to moderate chronic ecological risk (RQC > 0.1) and surrounding residents were posed to probable carcinogenic risk (TCR > 10-5). This work provides new insights into understanding the combined pollution and corresponding ecological risks from key industrial sectors globally.

Organic carbon compounds removal and phosphate immobilization for internal pollution control: Sediment microbial fuel cells, a prospect technology

As a current technology that can effectively remove organic carbon compounds and immobilize phosphorus in sediment, sediment microbial fuel cells (SMFCs) can combine sediment remediation with power generation. This review discusses the removal efficiency of SMFCs on organic carbon compounds, including sediment organic matter, antibiotics, oil-contaminated sediments, methane, persistent organic pollutants, and other organic pollutants in sediment, with more comprehensive and targeted summaries, and it also emphasizes the mitigation of phosphorus pollution in water from the perspective of controlling endogenous phosphorus. In this review, the microbial community is used as a starting point to explore more about its roles on phosphorus and organic carbon compounds under SMFCs. Electrode modification, addition of exogenous substances and combinations with other technologies to improve the performance of SMFCs are also reviewed. It is further demonstrated that SMFCs have the prospect of long-term sustainability, but more attention needs to be paid to the study of the mechanism of SMFCs and the continuous improvement of devices for further application in practice.

Exogenous paths regulate electron transfer enhancing sediment phosphorus immobilization

The lack of electron acceptors in anaerobic sediments leads to endogenous phosphorus release and low removal efficiency of organic pollutants. This study introduced electrodes and iron oxides into sediments to construct electron network transport chains to supplement electron acceptors. The sediment total organic carbon (TOC) removal efficiencies of closed-circuit (CC) and closed-circuit with Fe addition (CC-Fe) were estimated to be 1.4 and 1.7 times of the control. Unlike the fluctuation of phosphorus in the overlying water of the controls, the CC-Fe was stabled at 0.04-0.08 mg/L during the 84-d operation. The phosphorus in interstitial water of CC-Fe was 30 % less than in control, whereas in sediment, the redox sensitive phosphorus was increased by 14 %, indicating phosphorus was preferred to fix into sediments rather than interstitial water. This is important to reduce the risk of endogenous phosphorus returning to the overlying water. Microbial community analysis showed that the multiplication of Fonticella in CC-Fe (20 %) was 1.8-fold of control (11 %) which improved the TOC removal efficiency. While electroactive microorganisms accumulated near the electrode reduced the abundance of Fe-reducing bacteria, such as Desulfitobacterium (2.4 %), leading to better phosphorus fixation. These findings suggest a strategy for the efficient bioremediation of endogenous pollution in water, with broader implications for regulating electron transport paths and element cycles in aquatic environments.

Methane emission reduction oriented extracellular electron transfer and bioremediation of sediment microbial fuel cell: A review

Sediment is the internal and external source of water environment pollution, so sediment remediation is the premise of water body purification. Sediment microbial fuel cell (SMFC) can remove the organic pollutants in sediment by electroactive microorganisms, compete with methanogens for electrons, and realize resource recycling, methane emission inhibiting and energy recovering. Due to these characteristics, SMFC have attracted wide attention for sediment remediation. In this paper, we comprehensively summarized the recent advances of SMFC in the following areas: (1) The advantages and disadvantages of current applied sediment remediation technologies; (2) The basic principles and influencing factors of SMFC; (3) The application of SMFC for pollutant removal, phosphorus transformation and remote monitoring and power supply; (4) Enhancement strategies for SMFC in sediments remediation such as SMFC coupled with constructed wetland, aquatic plant and iron-based reaction. Finally, we have summarized the drawback of SMFC and discuss the future development directions of applying SMFC for sediment bioremediation.

Biotransformation as a tool for remediation of polycyclic aromatic hydrocarbons from polluted environment - review on toxicity and treatment technologies

Polycyclic aromatic hydrocarbons, a prominent family of persistent organic molecules produced by both anthropogenic and natural processes, are widespread in terrestrial and aquatic environments owing to their hydrophobicity, electrochemical stability and low aqueous solubility. Phenanthrene and naphthalene belong to the group of polycyclic aromatic hydrocarbons whose occurrence are reported to be relatively higher. The bioremediation mode of removing the toxicities of these two compounds has been reported to be promising than other methods. Most of the microbial classes of bacterial, fungal and algal origin are reported to degrade the target pollutants into non-toxic compounds effectively. The review aims to give an overview on toxicological studies, identification and enrichment techniques of phenanthrene and naphthalene degrading microbes and the bioremediation technologies (microbial assisted reactors, microbial fuel cells and microbial assisted constructed wetlands) reported by various researchers. All the three modes of bioremediation techniques were proved to be promising on different perspectives. In the treatment of phenanthrene, a maximum recovery of 96% and 98% was achieved in an aerobic membrane reactor with Bacillus species and single chamber air cathode microbial fuel cell with Acidovorax and Aquamicrobium respectively were reported. With the constructed wetland configuration, 95.5% of removal was attained with manganese oxide based microbial constructed wetland. The maximum degradation efficiency reported for naphthalene are 99% in a reverse membrane bioreactor, 98.5% in a marine sediment microbial fuel cell and 92.8% with a low-cost sandy soil constructed wetland.

Mn oxides enhanced pyrene removal with both rhizosphere and non-rhizosphere microorganisms in subsurface flow constructed wetlands

The polycyclic aromatic hydrocarbons (PAHs) are substantial wastewater pollutants emitted mostly by petroleum refineries and petrochemical industries, and their environmental fate has been of increasing concern among the public. Consequently, subsurface flow constructed wetlands (SFCWs) filled with Mn oxides (W-CW) or without Mn oxides (K-CW) were established to investigate the performance and mechanisms of pyrene (PYR) removal. The average removal rates of PYR in W-CW and K-CW were 96.00% and 92.33%, respectively. The PYR removal via other pathways (microbial degradation, photolysis, volatilisation, etc.) occupied a sizeable proportion, while the total PYR content in K-CW plant roots was significantly higher than that of W-CW. The microorganisms on the root surface and rhizosphere played an important role in PYR degradation in W-CW and K-CW and were higher in W-CW than that in K-CW in all matrix zones. The microorganisms between the 10-16 cm zone from the bottom of W-CW filled with Mn oxides (W-16) were positively correlated with PYR-degrading microorganisms, aerobic bacteria and facultative anaerobes, whereas K-16 without birnessite-coated sand was negatively correlated with these microorganisms.

Effects of carbon source on electricity generation and PAH removal in aquaculture sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) have been used for treating pollutants in sediment or overlying water. This study investigated the feasibility of constructing SMFCs under aquaculture conditions by employing indigenous carbohydrates as substrates to enhance the removal efficiency of polycyclic aromatic hydrocarbons (PAHs) in sediment, as well as the correlation between PAHs removal and electricity generation in SMFCs. The results showed that adding glucose could allow SMFCs to generate more electrical power and increase the removal efficiency of PAHs (by 57.2% for naphthalene, 41.3% for acenaphthene, and 36.5% for pyrene). In addition, starch enhanced PAHs removal by 49.9%, 35.8%, and 31.2%, respectively, whereas cellulose enhanced removal by 44.3%, 29.3%, and 26.9%, respectively. Pearson correlation coefficients between the level of electrical power generated and the removal masses of the three PAHs were 0.485, 0.830**, and 0.851**. Thus, the use of SMFCs could be an effective approach for PAH treatment in aquaculture, and the electrical power generated could be used as an in-situ indicator for the biodegradation rate of SMFCs.

Efficient use of electrons in a double-anode microbial fuel cell-biofilm electrode reactor self-powered coupled system for degradation of azo dyes

A coupled system consisting of a double-anode microbial fuel cell (MFC) unit and a biofilm electrode reactor (BER) has been applied to degrade the azo dye reactive brilliant red X-3B. In this system, the MFC effluent was used as the input of the BER. The MFC preliminarily degraded X-3B while generating electricity, and the BER obtained electrons from the MFC through the external circuit to continue degrading pollutants without the need for an external power supply. The X-3B removal efficiency was 41.93% higher in the coupled system than the control when the X-3B concentration was 3000 mg/L. The analysis of intermediate products showed that the azo bond of X-3B broke in the MFC, generating a large number of complex intermediates such as anthraquinones, which were further degraded into simple organic compounds in the BER. Meanwhile, the abundance of microbial taxa related to the degradation of refractory organics in the MFC was high, as was that of microbial taxa related to the degradation of simple organics in the BER. Furthermore, the abundance of microorganisms related to power generation in the MFC increased. These results provided an efficient strategy for improving electron utilization efficiency in the coupling system of bioelectrochemical system.

Copper removal and elemental sulfur recovery from fracturing flowback water in a microbial fuel cell with an extra electrochemical anode

Fracturing flowback water (FFW) from the shale gas exploitation resulted in environmental burden. FFW could be treated by a microbial fuel cell (MFC), but the challenge for the precipitation of ultrafine particles due to the supersaturation of sulfide remains to be addressed. Herein, we reported a Dual-anode MFC (DA-MFC), in which the FFW remediation and elemental sulfur recovery could be performed by regulating potential of the electrochemical anode. The removal of COD and sulfate was 70.0 ± 1.2% and 75.5 ± 0.4% in DA-MFCs by controlling potential at -0.1 V (vs. SHE) for 36 h. Meanwhile, the efficiency of copper removal and elemental sulfur recovery was up to 99.9 ± 0.5% and 75.6 ± 1.8%, respectively, which was attributed by the electrochemical oxidation of sulfide to elemental sulfur. Trichococcus, unclassified Prolixibacteraceae and unclassified Cloacimonadales enriched on the bioanodes of DA-MFCs were sensitive to potential regulation and favorable for degrading complex organics. UnclassifiedSynergistaceae, Desulfobacterium, Desulfovibrio, unclassified bacteria and Syner-01 was conducive to sulfate removal. Moreover, the elimination of Azoarcus due to potential regulation suppressed the biological oxidation of sulfide. Thus, organics were efficiently removed through the biological oxidation and sulfate reduction on bioanode, the copper ions were combined with the sulfide from sulfate reduction to precipitate effectively, and then the excessive sulfide in the system was converted into elemental sulfur attached on the electrochemical anode. The results provide new sights on bio-electrochemical technology for treatment of wastewater containing complex organics, heavy metals and sulfates.

Effect of starch-derived organic acids on the removal of polycyclic aromatic hydrocarbons in an aquaculture-sediment microbial fuel cell

This study constructed sediment microbial fuel cells (SMFCs) for polycyclic aromatic hydrocarbons (PAHs) removal in contaminated aquaculture sediment. Starch, a waste deposited in aquaculture sediment, was employed as the co-substrate for electricity generation and PAHs removal, and the effect of starch-derived organic acids on SMFC performance was assessed. The results indicated that sufficient starch promoted PAHs removal (69.9% for naphthalene, 55.6% for acenaphthene, and 46.8% for pyrene) in dual-chamber SMFC, whereas excessive starch attenuated SMFC performance because the organic acids accumulation reduced anode pH, decreased species diversity, and changed the microbial communities. The electricity generation and PAHs removal were positively correlated (R > 0.96), and both of them were related to Macellibacteroides belonging to Bacteroidetes. However, a larger single-chamber SMFC device did not obtain enhanced PAHs removal owing to the restricted "effective range" of the anode. Hence, more challenges need to be addressed to realize the practical application of SMFC.

Recent advances in soil microbial fuel cells for soil contaminants remediation

The cost-effective and eco-friendly approaches are needed for decontamination of polluted soils. The bio-electrochemical system, especially microbial fuel cells (MFCs) offer great promise as a technology for remediation of soil, sediment, sludge and wastewater. Recently, soil MFCs (SMFCs) have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. In this review, we comprehensively covered the principle of SMFCs including the mechanisms of electron releasing and electron transportation, summarized the applications for soil contaminants remediation by SMFCs with highlights on organic contaminants degradation and heavy metal ions removal. In addition, the main factors that affected the performance of SMFCs were discussed in details which would be helpful for performance optimization of SMFCs as well as the efficiency improvement for soil remediation. Moreover, the key issues need to be addressed and future perspectives are presented.

Electrochemical performance and response of bacterial community during phenanthrene degradation in single-chamber air-cathode microbial fuel cells

Polycyclic aromatic hydrocarbons have attracted considerable attention for their carcinogenic, teratogenic, and mutagenic properties in humans. Phenanthrene is one of the most abundant polycyclic aromatic hydrocarbons in aquatic environments. In this study, different concentrations of phenanthrene were degraded by single-chamber air-cathode microbial fuel cells. The electrochemical parameter of microbial fuel cells and biofilm changes on the anode were observed. The results showed that the addition of phenanthrene reduced the power output of the microbial fuel cell which affected the process of microbial electricity generation. Meanwhile, microorganisms destroyed the original structure of phenanthrene through anaerobic metabolism, and achieved good average degradation of 94.9-98.4%. Observation of the anodic biofilm found that the microbes had tolerance to phenanthrene and the biofilm exhibited to be well-constructed. Bacterial community distribution showed a decrease in the relative abundance of Acidovorax and Aquamicrobium, whereas the relative content of the main electroactive organism, Geobacter, increased by a factor of three. The results show that it is feasible for microbial fuel cells to biodegrade phenanthrene, and provide some references for the changes of microbial community during degradation process.

Denitrifying bio-cathodes developed from constructed wetland sediments exhibit electroactive nitrate reducing biofilms dominated by the genera Azoarcus and Pontibacter

To limit the nitrate contamination of ground and surface water, stimulation of denitrification by electrochemical approach is an innovative way to be explored. Two nitrate reducing bio-cathodes were developed under constant polarization (-0.5 V vs SCE) using sediments and water from a constructed wetland (Rampillon, Seine-et-Marne, France). The bio-cathodes responded to nitrate addition on chronoamperometry through an increase of the reductive current. The denitrification efficiency of the pilots increased by 47% compared to the negative controls without electrodes after polarization. 16S rRNA gene sequencing of the biofilms and sediments evidenced the significant and discriminating presence of the Azoarcus and Pontibacter genera in the biofilms from biocathodes active for nitrate reduction. Our study shows the possibility to promote the development of efficient Azoarcus-dominated biocathodes from freshwater sediment to enhance nitrate removal from surface waters.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

Ferric iron stimulation in marine SMFCs: Impact on the microbial structure evolution in contaminated sediments with low and high molecular weight PAHs

The impact of ferric iron stimulation on the evolution of microbial structure in marine sediment microbial fuel cells (SMFCs), operated for the bioremediation of a complex mixture of low and high molecular weight PAHs (naphthalene, fluorene, pyrene and benzo(a)pyrene), was assessed. Microbial evolution profiles showed high relative abundances of exoelectrogenic iron-reducing bacteria throughout the biodegradation, namely Geoalkalibacter, under ferric iron stimulation and anode reducing conditions, irrespective of sulfate reducing bacteria (SRB) inhibition. Highest PAHs removal was measured in the absence of anode reduction, under Fe stimulation and SRB inhibition, reaching 40.85% for benzo(a)pyrene, the most persistent PAH used in this study. Results suggest that amendment of contaminated sediment with ferric iron could constitute a better bioremediation strategy than using SMFCs. This becomes significant when considering the well-established and dominant indigenous SRB population in marine sediments that usually limits the performance of the anode as a terminal electron acceptor in marine SMFCs.

The Utility of Electrochemical Systems in Microbial Degradation of Polycyclic Aromatic Hydrocarbons: Discourse, Diversity and Design

Polycyclic aromatic hydrocarbons (PAHs), especially high molecular weight PAHs, are carcinogenic and mutagenic organic compounds that are difficult to degrade. Microbial remediation is a popular method for the PAH removal in diverse environments and yet it is limited by the lack of electron acceptors. An emerging solution is to use the microbial electrochemical system, in which the solid anode is used as an inexhaustible electron acceptor and the microbial activity is stimulated by biocurrent in situ to ensure the PAH removal and avoid the defects of bioremediation. Based on the extensive investigation of recent literatures, this paper summarizes and comments on the research progress of PAH removal by the microbial electrochemical system of diversified design, enhanced measures and functional microorganisms. First, the bioelectrochemical degradation of PAHs is reviewed in separate and mixed PAH degradation, and the removal performance of PAHs in different system configurations is compared with the anode modification, the enhancement of substrate and electron transfer, the addition of chemical reagents, and the combination with phytoremediation. Second, the key functional microbiota including PAH degrading microbes and exoelectrogens are overviewed as well as the reduced microbes without competitive advantage. Finally, the typical representations of electrochemical activity especially the internal resistance, power density and current density of systems and influence factors are reviewed with the correlation analysis between PAH removal and energy generation. Presently, most studies focused on the anode modification in the bioelectrochemical degradation of PAHs and actually more attentions need to be paid to enhance the mass transfer and thus larger remediation radius, and other smart designs are also proposed, especially that the combined use of phytoremediation could be an eco-friendly and sustainable approach. Additionally, exoelectrogens and PAH degraders are partially overlapping, but the exact functional mechanisms of interaction network are still elusive, which could be revealed with the aid of advanced bioinformatics technology. In order to optimize the efficacy of functional community, more advanced techniques such as omics technology, photoelectrocatalysis and nanotechnology should be considered in the future research to improve the energy generation and PAH biodegradation rate simultaneously.

Shewanella algae Relatives Capable of Generating Electricity from Acetate Contribute to Coastal-Sediment Microbial Fuel Cells Treating Complex Organic Matter

To identify exoelectrogens involved in the generation of electricity from complex organic matter in coastal sediment (CS) microbial fuel cells (MFCs), MFCs were inoculated with CS obtained from tidal flats and estuaries in the Tokyo bay and supplemented with starch, peptone, and fish extract as substrates. Power output was dependent on the CS used as inocula and ranged between 100 and 600 mW m^–2 (based on the projected area of the anode). Analyses of anode microbiomes using 16S rRNA gene amplicons revealed that the read abundance of some bacteria, including those related to Shewanella algae, positively correlated with power outputs from MFCs. Some fermentative bacteria were also detected as major populations in anode microbiomes. A bacterial strain related to S. algae was isolated from MFC using an electrode plate-culture device, and pure-culture experiments demonstrated that this strain exhibited the ability to generate electricity from organic acids, including acetate. These results suggest that acetate-oxidizing S. algae relatives generate electricity from fermentation products in CS-MFCs that decompose complex organic matter.

Response of sediment microbial communities to crude oil contamination in marine sediment microbial fuel cells under ferric iron stimulation

In this study, response of the microbial communities associated with the bioremediation of crude oil contaminated marine sediments was addressed using sediment microbial fuel cells (SMFCs). Crude oil was spiked into marine sediments at 1 g/kg of dry sediment to simulate a heavily contaminated marine environment. Conventional SMFCs were used with carbon fiber brushes as the electrode components and were enhanced with ferric iron to stimulate electrochemically active bacteria. Controls were operated under open circuit with and without ferric iron stimulation, with the latter condition simulating natural attenuation. Crude oil removal in the Fe enhanced SMFCs reached 22.0 ± 5.5% and was comparable to the measured removal in the control treatments (19.2 ± 7.4% in natural attenuation SMFCs and 15.2 ± 2.7% in Fe stimulated open circuit SMFCs), indicating no major enhancement to biodegradation under the applied experimental conditions. The low removal efficiency could be due to limitations in the mass transfer of the electron donor to the microbes and the anodes. The microbial community structure showed similarity between the iron stimulated SMFCs operated under the open and closed circuit. Natural attenuation SMFCs showed a unique profile. All SMFCs showed high relative abundances of hydrocarbon degrading bacteria rather than anode reducers, such as Marinobacter and Arthrobacter in the case of the natural attenuation SMFCs, and Gordonia in the case of iron stimulated SMFCs. This indicated that the microbial structure during the bioremediation process was mainly determined by the presence of petroleum contamination and to a lesser extent the presence of the ferric iron, with no major involvement of the anode as a terminal electron acceptor. Under the adopted experimental conditions, the absence of electrochemically active microbes throughout the biodegradation process indicates that the use of SMFCs in crude oil bioremediation is not a successful approach. Further studies are required to optimize SMFCs systems for this aim.

Linking bacterial community shifts with changes in the dissolved organic matter pool in a eutrophic lake

Aquatic bacterial communities play crucial roles in the circulation of nutrients in watershed ecosystems. However, the interaction between bacterial communities and chromophoric dissolved organic matter (CDOM) in freshwater ecosystems has not been studied in depth. In our study, we examined the constitution and interactions of CDOM with the bacterial community in Lake Chaohu and its inflow rivers under the influence of different exogenous pollutants. The results revealed that the bacterial community diversity in the inflow rivers was significantly lower than that in the lake sites. Clustering of different types of polluted inflow rivers integrated with the most abundant genera observed in specific areas indicated that environmentally guided species selection had a large impact on the composition of aquatic bacterial communities. Moreover, our study suggests that communities in lake environments may be more susceptible to interference through a variety of physiologies or via functional redundancy, allowing them to preserve their community structure. Through linear discriminant analysis effect size (Lefse) methods, we revealed that some taxa (from phylum to genus) were consistently enriched in the lake sites. Based on correlation network analysis results, the supersession niches of bacterial community members related to different CDOM in the biogeochemical process was determined. This study provides an ecological basis for the control of external pollution and the protection of the water environment in watershed ecosystems.

Performance of different macrophytes in the decontamination of and electricity generation from swine wastewater via an integrated constructed wetland-microbial fuel cell process

Plants constitute a major element of constructed wetlands (CWs). In this study, a coupled system comprising an integrated vertical flow CW (IVCW) and a microbial fuel cell (MFC) for swine wastewater treatment was developed to research the effects of macrophytes commonly employed in CWs, Canna indica, Acorus calamus, and Ipomoea aquatica, on decontamination and electricity production in the system. Because of the different root types and amounts of oxygen released by the roots, the rates of chemical oxygen demand (COD) and ammonium nitrogen (NH₄⁺-N) removal from the swine wastewater differed as well. In the unplanted, Canna indica, Acorus calamus, and Ipomoea aquatica systems, the COD removal rates were 80.20%, 88.07%, 84.70%, and 82.20%, respectively, and the NH₄⁺-N removal rates were 49.96%, 75.02%, 70.25%, and 68.47%, respectively. The decontamination capability of the Canna indica system was better than those of the other systems. The average output voltages were 520±42, 715±20, 660±27, and 752±26mV for the unplanted, Canna indica, Acorus calamus, and Ipomoea aquatica systems, respectively, and the maximum power densities were 0.2230, 0.4136, 0.3614, and 0.4964W/m³, respectively. Ipomoea aquatica had the largest effect on bioelectricity generation promotion. In addition, electrochemically active bacteria, Geobacter and Desulfuromonas, were detected in the anodic biofilm by high-throughput sequencing analysis, and Comamonas (Proteobacteria), which is widely found in MFCs, was also detected in the anodic biofilm. These results confirmed the important role of plants in IVCW-MFCs.

Influence of organic carbon fractions of freshwater biofilms on the sorption for phenanthrene and ofloxacin: The important role of aliphatic carbons

Sorption to biofilms is thought to be a crucial process controlling the fate of trace organic contaminants in aquatic systems. The organic composition of biofilms is regarded as the determining factor in the sorption mechanism of biofilm organic carbon fractions; however, its role is not well known. Here, the sorption of phenanthrene and ofloxacin was modeled with classic and emerging organic contaminants, respectively, by comparatively investigating nine type of freshwater biofilms cultured in a river, lake, and reservoir in spring, summer, and autumn. The chemical features of the nine biofilms were analyzed using elemental analysis, infrared spectroscopy, X-ray photoelectron spectroscopy, and carbon-13 nuclear magnetic resonance. Results showed that the freshwater biofilms were aliphatic-rich natural amorphous solid substances with O-containing functional groups, and their surface polarity was significantly lower than their bulk polarity. All the isotherms of phenanthrene and ofloxacin sorption by the biofilms were linear. The organic carbon-normalized partition coefficient values for phenanthrene and ofloxacin on the nine biofilms ranged from 91.9 to 364.2 L g^-1 and 3.2 to 43.2 L g^-1, respectively. The van der Waals interaction between a majority of aliphatic carbon (73.4%-83.9%) in biofilms and the two sorbates was much stronger than π-π interactions between a minority of aromatic carbon (12.7%-21.7%) and sorbates. The surface polarity of the biofilms regulated polar interactions including the hydrogen bonding and electron donor-acceptor interactions. Both the aliphatic carbon and surface polarity in the biofilms enhanced the sorption of phenanthrene and ofloxacin. The sorption characteristics and mechanisms of polycyclic aromatic hydrocarbons and antibiotics on biofilms shown in our present and previous studies are different from those of other ubiquitous natural solid materials such as soils and sediments. This study provides insight into the importance of aliphatic carbon fractions of freshwater biofilms for the sorption of classic and emerging organic contaminants.

The plant-enhanced bio-cathode: Root exudates and microbial community for nitrogen removal

A plant bio-electrochemical system (PBES) was constructed for organic pollutant removal and power generation. The bio-cathode, composed of granular activated carbon (GAC), stainless wire mesh and a plant species (Triticum aestivum L.), was able to catalyze cathodic reactions without any requirement for aeration or power input. During the 60-day-long operation, an average voltage of 516 mV (1000 Ω) and maximum power density (P_max) of 0.83 W/m³ were obtained in the PBES. The total nitrogen removal and total organic carbon removal in the PBES were 85% and 97%, respectively. Microbial community analyses indicated that bacteria associated with power generation and organic removal were the predominant species in the bio-cathode, and plant-growth-promoting rhizobacteria were also found in the PBES. The results suggested that the coupling of plants with the GAC cathode may enhance the organic-matter degradation and energy generation from wastewater and therefore provide a new method for bio-cathode design and promote energy efficiency.

Bioenergy generation and degradation pathway of phenanthrene and anthracene in a constructed wetland-microbial fuel cell with an anode amended with nZVI

The frequent occurrence of polycyclic aromatic hydrocarbons (PAHs) in aquatic environments is of great concern because of their teratogenicity, toxicity, carcinogenicity, and mutagenicity to plants, animals and human beings. In this study the bioelectricity generation, biodegradation, phytoextraction and substrate adsorption of phenanthrene and anthracene in a constructed wetland-microbial fuel cell (CW-MFC) were investigated with an anode electrode amended with or without biochar-nZVI. During a 182-day operation period, the average removal efficiency for phenanthrene and anthracene ranged from 88.5% to 96.4%. The concentration of phenanthrene in roots, stems and laminas of T. orientalis was 14.9, 3.9 and 2.3 ng g^-1 respectively, while that of anthracene was 22.2, 3.1 and 1.3 ng g^-1, respectively. In addition, the application of nZVI was conducive to bioelectricity generation and organic compound degradation in the CW-MFC reactor. The distribution of the bacterial community indicated that the relative abundance of Bacillus, Paludibacter, Desulfovibrio and Lactococcus with a degradation capability for refractory organics was significantly increased. Especially the genus Bacillus for excreting catalase became more abundant. The results of our study indicate how to promote bioelectricity generation and biodegradation of refractory organic compounds in a CW-MFC by improving the culture conditions for bacteria.

Anodic potentials, electricity generation and bacterial community as affected by plant roots in sediment microbial fuel cell: Effects of anode locations

A planted sediment microbial fuel cell (PSMFC) is a promising new technology for harvesting energy and remediating a contaminated geo-environment. In this study, the effects of roots (of Acorus tatarinowii) on oxygen profiles in sediment, power generation, and anodic bacterial community were investigated in PSMFCs and unplanted SMFCs with different anode locations to roots. The presence of plant did not improve the electricity generation when roots were placed on the surface of an anode because a high amount of oxygen loss from roots increased the redox potential at anode and made aerobic bacteria co-exit and compete with electrochemically active bacteria in substance utilization. It was suggested to place the anode under the roots with a proper distance, where the PSMFCs made use of root-derived organics, avoiding the negative effects of oxygen loss. Oxygen loss could control the diurnal rhythm of power generation in the PSMFCs.

Augmenting atrazine and hexachlorobenzene degradation under different soil redox conditions in a bioelectrochemistry system and an analysis of the relevant microorganisms

Soil microbial fuel cells (MFCs) are a sustainable technology that degrades organic pollutants while generating electricity. However, there have been no detailed studies of the mechanisms of pollutant degradation in soil MFCs. In this study, the effects of external resistance and electrode effectiveness on atrazine and hexachlorobenzene (HCB) degradation were evaluated, the performance of soil MFCs in the degradation of these pollutants under different soil redox conditions was assessed, and the associated microorganisms in the anode were investigated. With an external resistance of 20Ω, the degradation efficiencies of atrazine and HCB were 95% and 78%, respectively. The degradation efficiency, degradation rate increased with decreasing external resistance, while the half-life decreased. There were different degradation trends for different pollutants under different soil redox conditions. The fastest degradation rate of atrazine was in the upper MFC section (aerobic), whereas that of HCB was in the lower MFC section (anaerobic). The results showed that electrode effectiveness played a significant role in pollution degradation. In addition, the microbial community analysis demonstrated that Proteobacteria, especially Deltaproteobacteria involved in current generation was extremely abundant (27.49%) on soil MFC anodes, although the percentage abundances of atrazine degrading Rhodocyclaceae (8.77%), Desulfitobacterium (0.64%), and HCB degrading Desulfuromonas (0.73%), were considerably lower. The results of the study suggested that soil MFCs can enhance the degradation of atrazine and HCB, and bioelectrochemical reduction was the main mechanism for the pollutants degradation.

Remediation of PAH polluted soils using a soil microbial fuel cell: Influence of electrode interval and role of microbial community

The soil microbial fuel cells (SMFCs) were constructed to remediate soils contaminated by polycyclic aromatic hydrocarbons (PAHs). With a maximum power density of 12.1mWm^-2 and an internal resistance of 470Ω, a closed SMFC showed electricity generation comparable to that by an open SMFC after 175days of operation and meanwhile increased the removal rates of anthracene, phenanthrene, and pyrene to 54.2±2.7%, 42.6±1.9% and 27.0±2.1% from 20.8±1.1%, 17.3±1.2% and 11.7±0.9%, respectively, by the open SMFC. Both the electricity generation and the removal of PAHs increased with the decreased electrode interval. When the electrode interval ranged between 4cm and 10cm, the more closely the electrodes were positioned, the more efficient the electricity generation and removal of PAHs became. Dominated by the genus of Geobacter, the SMFC was enriched in electrogenic bacteria at the anode surface, and the growth of certain microbes other than electrogenic bacteria in the soil was improved by electrical stimulation. This finding reveals the critical mechanism underlying electricity generation and improved the removal of PAHs.

A Pilot-scale Benthic Microbial Electrochemical System (BMES) for Enhanced Organic Removal in Sediment Restoration

A benthic microbial electrochemical systems (BMES) of 195 L (120 cm long, 25 cm wide and 65 cm height) was constructed for sediment organic removal. Sediment from a natural river (Ashi River) was used as test sediments in the present research. Three-dimensional anode (Tri-DSA) with honeycomb structure composed of carbon cloth and supporting skeleton was employed in this research for the first time. The results demonstrated that BMES performed good in organic-matter degradation and energy generation from sediment and could be considered for river sediments in situ restoration as novel method. Community analysis from the soil and anode using 16S rDNA gene sequencing showed that more electrogenic functional bacteria was accumulated in anode area when circuit connected than control system.